appmap 0.83.4 → 0.84.0

data/spec/fixtures/rails6_users_app/bin/nokogiri

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'nokogiri' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("nokogiri", "nokogiri")

data/spec/fixtures/rails6_users_app/bin/rackup

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'rackup' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("rack", "rackup")

data/spec/fixtures/rails6_users_app/bin/rails

@@ -1,4 +0,0 @@
-#!/usr/bin/env ruby
-APP_PATH = File.expand_path('../config/application', __dir__)
-require_relative '../config/boot'
-require 'rails/commands'

data/spec/fixtures/rails6_users_app/bin/rake

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'rake' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("rake", "rake")

data/spec/fixtures/rails6_users_app/bin/rspec

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'rspec' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("rspec-core", "rspec")

data/spec/fixtures/rails6_users_app/bin/ruby-parse

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'ruby-parse' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("parser", "ruby-parse")

data/spec/fixtures/rails6_users_app/bin/ruby-rewrite

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'ruby-rewrite' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("parser", "ruby-rewrite")

data/spec/fixtures/rails6_users_app/bin/sequel

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'sequel' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("sequel", "sequel")

data/spec/fixtures/rails6_users_app/bin/setup

@@ -1,25 +0,0 @@
-#!/usr/bin/env ruby
-require 'fileutils'
-include FileUtils
-
-# path to your application root.
-APP_ROOT = File.expand_path('..', __dir__)
-
-def system!(*args)
-  system(*args) || abort("\n== Command #{args} failed ==")
-end
-
-chdir APP_ROOT do
-  # This script is a starting point to setup your application.
-  # Add necessary setup steps to this file.
-
-  puts '== Installing dependencies =='
-  system! 'gem install bundler --conservative'
-  system('bundle check') || system!('bundle install')
-
-  puts "\n== Removing old logs and tempfiles =="
-  system! 'bin/rails log:clear tmp:clear'
-
-  puts "\n== Restarting application server =="
-  system! 'bin/rails restart'
-end

data/spec/fixtures/rails6_users_app/bin/sprockets

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'sprockets' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("sprockets", "sprockets")

data/spec/fixtures/rails6_users_app/bin/thor

@@ -1,29 +0,0 @@
-#!/usr/bin/env ruby
-# frozen_string_literal: true
-
-#
-# This file was generated by Bundler.
-#
-# The application 'thor' is installed as part of a gem, and
-# this file is here to facilitate running it.
-#
-
-require "pathname"
-ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
-  Pathname.new(__FILE__).realpath)
-
-bundle_binstub = File.expand_path("../bundle", __FILE__)
-
-if File.file?(bundle_binstub)
-  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
-    load(bundle_binstub)
-  else
-    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
-Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
-  end
-end
-
-require "rubygems"
-require "bundler/setup"
-
-load Gem.bin_path("thor", "thor")

data/spec/fixtures/rails6_users_app/bin/update

@@ -1,25 +0,0 @@
-#!/usr/bin/env ruby
-require 'fileutils'
-include FileUtils
-
-# path to your application root.
-APP_ROOT = File.expand_path('..', __dir__)
-
-def system!(*args)
-  system(*args) || abort("\n== Command #{args} failed ==")
-end
-
-chdir APP_ROOT do
-  # This script is a way to update your development environment automatically.
-  # Add necessary update steps to this file.
-
-  puts '== Installing dependencies =='
-  system! 'gem install bundler --conservative'
-  system('bundle check') || system!('bundle install')
-
-  puts "\n== Removing old logs and tempfiles =="
-  system! 'bin/rails log:clear tmp:clear'
-
-  puts "\n== Restarting application server =="
-  system! 'bin/rails restart'
-end

data/spec/fixtures/rails6_users_app/config/application.rb

@@ -1,45 +0,0 @@
-require_relative 'boot'
-
-def orm_module
-  ENV['ORM_MODULE'] || 'sequel'
-end
-
-require "rails"
-# Pick the frameworks you want:
-require "active_model/railtie"
-require "active_job/railtie"
-require "action_controller/railtie"
-require "action_view/railtie"
-
-case orm_module
-when 'sequel'
-  require 'sequel-rails'
-  require 'sequel_secure_password'
-  require 'database_cleaner-sequel' if Rails.env.test?
-when 'activerecord'
-  require 'active_record/railtie'
-  require 'database_cleaner-active_record' if Rails.env.test?
-end
-
-# Require the gems listed in Gemfile, including any gems
-# you've limited to :test, :development, or :production.
-Bundler.require(*Rails.groups)
-
-module UsersApp
-  class Application < Rails::Application
-    # Initialize configuration defaults for originally generated Rails version.
-    config.load_defaults 5.2
-
-    # Settings in config/environments/* take precedence over those specified here.
-    # Application configuration can go into files in config/initializers
-    # -- all .rb files in that directory are automatically loaded after loading
-    # the framework and any gems in your application.
-
-    # Only loads a smaller set of middleware suitable for API only apps.
-    # Middleware like session, flash, cookies can be added back manually.
-    # Skip views, helpers and assets when generating a new resource.
-    config.api_only = true
-
-    config.autoload_paths << File.join(Rails.root, "app/models/#{orm_module}")
-  end
-end

data/spec/fixtures/rails6_users_app/config/boot.rb

@@ -1,3 +0,0 @@
-ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
-
-require 'bundler/setup' # Set up gems listed in the Gemfile.

data/spec/fixtures/rails6_users_app/config/credentials.yml.enc

@@ -1 +0,0 @@
-fvHJWgAisxKdEtPejF1DMotrGxwK5QwUVQRqOvkI7+olbFTlcZMah2cfLAupIMKEZKXwx3ui+kNWDbMv1/JYxiMQfsvDZPx/yXD4k0IENYMILaMApFfxco5cjerEHCOZb+TJxOCTKGHD1ckt8zwNbBOA6mN1P8sbs3IXRc8bz/2FG/ILQvNIsvMO2ODb8WEeIp5N3dWkkk2pPJqwodBpoHHqcycTMru/pNl+V8BHEgfjMOIzdHpz2M1A2F4vOOCWx4vL2onZJXMDta3p9FZoypGZLr5X37+/B9fM+dJhWNz2Bvrlq8amdbKmOfSjehUAsSePj+nBY8zu0ZeNx4t7/3JBOKQ8PTSvovTgw71IeZckavz1dyyPatJ3d7ngrC7x2/VKt/JP1nAaf+5kBEjaARuM0+VewXZiO7Y5--ze5FclBM0tyGg/Ql--+S/6aIP52fpUTSoTQlw5nA==

data/spec/fixtures/rails6_users_app/config/database.yml

@@ -1 +0,0 @@
-../../database.yml

data/spec/fixtures/rails6_users_app/config/environment.rb

@@ -1,5 +0,0 @@
-# Load the Rails application.
-require_relative 'application'
-
-# Initialize the Rails application.
-Rails.application.initialize!

data/spec/fixtures/rails6_users_app/config/environments/development.rb

@@ -1,40 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # In the development environment your application's code is reloaded on
-  # every request. This slows down response time but is perfect for development
-  # since you don't have to restart the web server when you make code changes.
-  config.cache_classes = false
-
-  # Do not eager load code on boot.
-  config.eager_load = false
-
-  # Show full error reports.
-  config.consider_all_requests_local = true
-
-  # Enable/disable caching. By default caching is disabled.
-  # Run rails dev:cache to toggle caching.
-  if Rails.root.join('tmp', 'caching-dev.txt').exist?
-    config.action_controller.perform_caching = true
-
-    config.cache_store = :memory_store
-    config.public_file_server.headers = {
-      'Cache-Control' => "public, max-age=#{2.days.to_i}"
-    }
-  else
-    config.action_controller.perform_caching = false
-
-    config.cache_store = :null_store
-  end
-
-  # Print deprecation notices to the Rails logger.
-  config.active_support.deprecation = :log
-
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-
-  # Use an evented file watcher to asynchronously detect changes in source code,
-  # routes, locales, etc. This feature depends on the listen gem.
-  # config.file_watcher = ActiveSupport::EventedFileUpdateChecker
-end

data/spec/fixtures/rails6_users_app/config/environments/production.rb

@@ -1,68 +0,0 @@
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # Code is not reloaded between requests.
-  config.cache_classes = true
-
-  # Eager load code on boot. This eager loads most of Rails and
-  # your application in memory, allowing both threaded web servers
-  # and those relying on copy on write to perform better.
-  # Rake tasks automatically ignore this option for performance.
-  config.eager_load = true
-
-  # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
-  config.action_controller.perform_caching = true
-
-  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
-  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
-  # config.require_master_key = true
-
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
-
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
-
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
-
-  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
-
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
-
-  # Prepend all log lines with the following tags.
-  config.log_tags = [ :request_id ]
-
-  # Use a different cache store in production.
-  # config.cache_store = :mem_cache_store
-
-  # Use a real queuing backend for Active Job (and separate queues per environment)
-  # config.active_job.queue_adapter     = :resque
-  # config.active_job.queue_name_prefix = "users_app_#{Rails.env}"
-
-  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation cannot be found).
-  config.i18n.fallbacks = true
-
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
-
-  # Use a different logger for distributed setups.
-  # require 'syslog/logger'
-  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
-
-  if ENV["RAILS_LOG_TO_STDOUT"].present?
-    logger           = ActiveSupport::Logger.new(STDOUT)
-    logger.formatter = config.log_formatter
-    config.logger    = ActiveSupport::TaggedLogging.new(logger)
-  end
-end

data/spec/fixtures/rails6_users_app/config/environments/test.rb

@@ -1,39 +0,0 @@
-require 'active_support'
-require 'active_support/core_ext'
-
-Rails.application.configure do
-  # Settings specified here will take precedence over those in config/application.rb.
-
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
-
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
-
-  # Configure public file server for tests with Cache-Control for performance.
-  config.public_file_server.enabled = true
-  config.public_file_server.headers = {
-    'Cache-Control' => "public, max-age=#{1.hour.to_i}"
-  }
-
-  # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
-  config.action_controller.perform_caching = false
-
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
-
-  # Disable request forgery protection in test environment.
-  config.action_controller.allow_forgery_protection = false
-
-  # Print deprecation notices to the stderr.
-  config.active_support.deprecation = :stderr
-
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
-end

data/spec/fixtures/rails6_users_app/config/initializers/application_controller_renderer.rb

@@ -1,8 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# ActiveSupport::Reloader.to_prepare do
-#   ApplicationController.renderer.defaults.merge!(
-#     http_host: 'example.org',
-#     https: false
-#   )
-# end

data/spec/fixtures/rails6_users_app/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/spec/fixtures/rails6_users_app/config/initializers/cors.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Avoid CORS issues when API is called from the frontend app.
-# Handle Cross-Origin Resource Sharing (CORS) in order to accept cross-origin AJAX requests.
-
-# Read more: https://github.com/cyu/rack-cors
-
-# Rails.application.config.middleware.insert_before 0, Rack::Cors do
-#   allow do
-#     origins 'example.com'
-#
-#     resource '*',
-#       headers: :any,
-#       methods: [:get, :post, :put, :patch, :delete, :options, :head]
-#   end
-# end

data/spec/fixtures/rails6_users_app/config/initializers/filter_parameter_logging.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]

data/spec/fixtures/rails6_users_app/config/initializers/inflections.rb

@@ -1,16 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format. Inflections
-# are locale specific, and you may define rules for as many different
-# locales as you wish. All of these examples are active by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end
-
-# These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
-# end

data/spec/fixtures/rails6_users_app/config/initializers/mime_types.rb

@@ -1,4 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf

data/spec/fixtures/rails6_users_app/config/initializers/wrap_parameters.rb

@@ -1,9 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# This file contains settings for ActionController::ParamsWrapper which
-# is enabled by default.
-
-# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
-ActiveSupport.on_load(:action_controller) do
-  wrap_parameters format: [:json]
-end

data/spec/fixtures/rails6_users_app/config/locales/en.yml

@@ -1,33 +0,0 @@
-# Files in the config/locales directory are used for internationalization
-# and are automatically loaded by Rails. If you want to use locales other
-# than English, add the necessary files in this directory.
-#
-# To use the locales, use `I18n.t`:
-#
-#     I18n.t 'hello'
-#
-# In views, this is aliased to just `t`:
-#
-#     <%= t('hello') %>
-#
-# To use a different locale, set it with `I18n.locale`:
-#
-#     I18n.locale = :es
-#
-# This would use the information in config/locales/es.yml.
-#
-# The following keys must be escaped otherwise they will not be retrieved by
-# the default I18n backend:
-#
-# true, false, on, off, yes, no
-#
-# Instead, surround them with single quotes.
-#
-# en:
-#   'true': 'foo'
-#
-# To learn more, please read the Rails Internationalization guide
-# available at http://guides.rubyonrails.org/i18n.html.
-
-en:
-  hello: "Hello world"

data/spec/fixtures/rails6_users_app/config/routes.rb

@@ -1,11 +0,0 @@
-Rails.application.routes.draw do
-  namespace :api do
-    resources :users, only: %i[index create]
-  end
-
-  resources :users, only: %i[index show]
-
-  get 'health', to: 'health#show'
-
-  root 'users#index'
-end