appmap 0.31.0

data/spec/fixtures/rails_users_app/bin/rackup

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'rackup' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("rack", "rackup")

data/spec/fixtures/rails_users_app/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../config/application', __dir__)
+require_relative '../config/boot'
+require 'rails/commands'

data/spec/fixtures/rails_users_app/bin/rake

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'rake' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("rake", "rake")

data/spec/fixtures/rails_users_app/bin/rspec

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'rspec' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("rspec-core", "rspec")

data/spec/fixtures/rails_users_app/bin/ruby-parse

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'ruby-parse' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("parser", "ruby-parse")

data/spec/fixtures/rails_users_app/bin/ruby-rewrite

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'ruby-rewrite' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("parser", "ruby-rewrite")

data/spec/fixtures/rails_users_app/bin/sequel

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'sequel' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("sequel", "sequel")

data/spec/fixtures/rails_users_app/bin/setup

@@ -0,0 +1,25 @@
+#!/usr/bin/env ruby
+require 'fileutils'
+include FileUtils
+
+# path to your application root.
+APP_ROOT = File.expand_path('..', __dir__)
+
+def system!(*args)
+  system(*args) || abort("\n== Command #{args} failed ==")
+end
+
+chdir APP_ROOT do
+  # This script is a starting point to setup your application.
+  # Add necessary setup steps to this file.
+
+  puts '== Installing dependencies =='
+  system! 'gem install bundler --conservative'
+  system('bundle check') || system!('bundle install')
+
+  puts "\n== Removing old logs and tempfiles =="
+  system! 'bin/rails log:clear tmp:clear'
+
+  puts "\n== Restarting application server =="
+  system! 'bin/rails restart'
+end

data/spec/fixtures/rails_users_app/bin/sprockets

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'sprockets' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("sprockets", "sprockets")

data/spec/fixtures/rails_users_app/bin/thor

@@ -0,0 +1,29 @@
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+#
+# This file was generated by Bundler.
+#
+# The application 'thor' is installed as part of a gem, and
+# this file is here to facilitate running it.
+#
+
+require "pathname"
+ENV["BUNDLE_GEMFILE"] ||= File.expand_path("../../Gemfile",
+  Pathname.new(__FILE__).realpath)
+
+bundle_binstub = File.expand_path("../bundle", __FILE__)
+
+if File.file?(bundle_binstub)
+  if File.read(bundle_binstub, 300) =~ /This file was generated by Bundler/
+    load(bundle_binstub)
+  else
+    abort("Your `bin/bundle` was not generated by Bundler, so this binstub cannot run.
+Replace `bin/bundle` by running `bundle binstubs bundler --force`, then run this command again.")
+  end
+end
+
+require "rubygems"
+require "bundler/setup"
+
+load Gem.bin_path("thor", "thor")

data/spec/fixtures/rails_users_app/bin/update

@@ -0,0 +1,25 @@
+#!/usr/bin/env ruby
+require 'fileutils'
+include FileUtils
+
+# path to your application root.
+APP_ROOT = File.expand_path('..', __dir__)
+
+def system!(*args)
+  system(*args) || abort("\n== Command #{args} failed ==")
+end
+
+chdir APP_ROOT do
+  # This script is a way to update your development environment automatically.
+  # Add necessary update steps to this file.
+
+  puts '== Installing dependencies =='
+  system! 'gem install bundler --conservative'
+  system('bundle check') || system!('bundle install')
+
+  puts "\n== Removing old logs and tempfiles =="
+  system! 'bin/rails log:clear tmp:clear'
+
+  puts "\n== Restarting application server =="
+  system! 'bin/rails restart'
+end

data/spec/fixtures/rails_users_app/config.ru

@@ -0,0 +1,5 @@
+# This file is used by Rack-based servers to start the application.
+
+require_relative 'config/environment'
+
+run Rails.application

data/spec/fixtures/rails_users_app/config/application.rb

@@ -0,0 +1,51 @@
+require_relative 'boot'
+
+def orm_module
+  ENV['ORM_MODULE'] || 'sequel'
+end
+
+require "rails"
+# Pick the frameworks you want:
+require "active_model/railtie"
+require "active_job/railtie"
+require "action_controller/railtie"
+require "action_view/railtie"
+
+case orm_module
+when 'sequel'
+  require 'sequel-rails'
+  require 'sequel_secure_password'
+when 'activerecord'
+  require 'active_record/railtie'
+end
+
+# require "active_storage/engine"
+# require "action_mailer/railtie"
+# require "action_cable/engine"
+# require "sprockets/railtie"
+# require "rails/test_unit/railtie"
+
+# Require the gems listed in Gemfile, including any gems
+# you've limited to :test, :development, or :production.
+Bundler.require(*Rails.groups)
+
+module UsersApp
+  class Application < Rails::Application
+    # Initialize configuration defaults for originally generated Rails version.
+    config.load_defaults 5.2
+
+    config.appmap.enabled = true if ENV['APPMAP'] == 'true' && !Rails.env.test?
+
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration can go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded after loading
+    # the framework and any gems in your application.
+
+    # Only loads a smaller set of middleware suitable for API only apps.
+    # Middleware like session, flash, cookies can be added back manually.
+    # Skip views, helpers and assets when generating a new resource.
+    config.api_only = true
+
+    config.autoload_paths << File.join(Rails.root, "app/models/#{orm_module}")
+  end
+end

data/spec/fixtures/rails_users_app/config/boot.rb

@@ -0,0 +1,3 @@
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../Gemfile', __dir__)
+
+require 'bundler/setup' # Set up gems listed in the Gemfile.

data/spec/fixtures/rails_users_app/config/credentials.yml.enc

@@ -0,0 +1 @@
+fvHJWgAisxKdEtPejF1DMotrGxwK5QwUVQRqOvkI7+olbFTlcZMah2cfLAupIMKEZKXwx3ui+kNWDbMv1/JYxiMQfsvDZPx/yXD4k0IENYMILaMApFfxco5cjerEHCOZb+TJxOCTKGHD1ckt8zwNbBOA6mN1P8sbs3IXRc8bz/2FG/ILQvNIsvMO2ODb8WEeIp5N3dWkkk2pPJqwodBpoHHqcycTMru/pNl+V8BHEgfjMOIzdHpz2M1A2F4vOOCWx4vL2onZJXMDta3p9FZoypGZLr5X37+/B9fM+dJhWNz2Bvrlq8amdbKmOfSjehUAsSePj+nBY8zu0ZeNx4t7/3JBOKQ8PTSvovTgw71IeZckavz1dyyPatJ3d7ngrC7x2/VKt/JP1nAaf+5kBEjaARuM0+VewXZiO7Y5--ze5FclBM0tyGg/Ql--+S/6aIP52fpUTSoTQlw5nA==

data/spec/fixtures/rails_users_app/config/database.yml

@@ -0,0 +1,18 @@
+default: &default
+  host: <%= ENV['PGHOST'] || 'pg' %>
+  port: <%= ENV['PGPORT'] || 5432 %>
+  user: postgres
+  adapter: postgresql
+  encoding: unicode
+  # For details on connection pooling, see Rails configuration guide
+  # http://guides.rubyonrails.org/configuring.html#database-pooling
+  pool: <%= ENV.fetch("RAILS_MAX_THREADS") { 5 } %>
+
+development:
+  <<: *default
+  database: app_development
+test:
+  <<: *default
+  database: app_test
+production:
+  <<: *default

data/spec/fixtures/rails_users_app/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require_relative 'application'
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/spec/fixtures/rails_users_app/config/environments/development.rb

@@ -0,0 +1,40 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports.
+  config.consider_all_requests_local = true
+
+  # Enable/disable caching. By default caching is disabled.
+  # Run rails dev:cache to toggle caching.
+  if Rails.root.join('tmp', 'caching-dev.txt').exist?
+    config.action_controller.perform_caching = true
+
+    config.cache_store = :memory_store
+    config.public_file_server.headers = {
+      'Cache-Control' => "public, max-age=#{2.days.to_i}"
+    }
+  else
+    config.action_controller.perform_caching = false
+
+    config.cache_store = :null_store
+  end
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+
+  # Use an evented file watcher to asynchronously detect changes in source code,
+  # routes, locales, etc. This feature depends on the listen gem.
+  # config.file_watcher = ActiveSupport::EventedFileUpdateChecker
+end

data/spec/fixtures/rails_users_app/config/environments/production.rb

@@ -0,0 +1,68 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
+  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+  # config.require_master_key = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = 'http://assets.example.com'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Use the lowest log level to ensure availability of diagnostic information
+  # when problems arise.
+  config.log_level = :debug
+
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Use a real queuing backend for Active Job (and separate queues per environment)
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "users_app_#{Rails.env}"
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require 'syslog/logger'
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
+end