apidae 1.4.16 → 2.0.0

data/test/dummy/config/environments/production.rb

@@ -1,8 +1,10 @@
+require "active_support/core_ext/integer/time"
+
 Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
   # Code is not reloaded between requests.
-  config.cache_classes = true
+  config.enable_reloading = false
 
   # Eager load code on boot. This eager loads most of Rails and
   # your application in memory, allowing both threaded web servers
@@ -11,54 +13,64 @@ Rails.application.configure do
   config.eager_load = true
 
   # Full error reports are disabled and caching is turned on.
-  config.consider_all_requests_local       = false
+  config.consider_all_requests_local = false
   config.action_controller.perform_caching = true
 
-  # Enable Rack::Cache to put a simple HTTP cache in front of your application
-  # Add `rack-cache` to your Gemfile before enabling this.
-  # For large-scale production use, consider using a caching reverse proxy like
-  # NGINX, varnish or squid.
-  # config.action_dispatch.rack_cache = true
+  # Ensures that a master key has been made available in ENV["RAILS_MASTER_KEY"], config/master.key, or an environment
+  # key such as config/credentials/production.key. This key is used to decrypt credentials (and other encrypted files).
+  # config.require_master_key = true
 
-  # Disable serving static files from the `/public` folder by default since
-  # Apache or NGINX already handles this.
-  config.serve_static_files = ENV['RAILS_SERVE_STATIC_FILES'].present?
+  # Disable serving static files from `public/`, relying on NGINX/Apache to do so instead.
+  # config.public_file_server.enabled = false
 
-  # Compress JavaScripts and CSS.
-  config.assets.js_compressor = :uglifier
-  # config.assets.css_compressor = :sass
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.asset_host = "http://assets.example.com"
 
-  # Do not fallback to assets pipeline if a precompiled asset is missed.
-  config.assets.compile = false
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for Apache
+  # config.action_dispatch.x_sendfile_header = "X-Accel-Redirect" # for NGINX
 
-  # Asset digests allow you to set far-future HTTP expiration dates on all assets,
-  # yet still be able to expire them through the digest params.
-  config.assets.digest = true
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
 
-  # `config.assets.precompile` and `config.assets.version` have moved to config/initializers/assets.rb
+  # Mount Action Cable outside main process or domain.
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = "wss://example.com/cable"
+  # config.action_cable.allowed_request_origins = [ "http://example.com", /http:\/\/example.*/ ]
 
-  # Specifies the header that your server uses for sending files.
-  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
+  # Assume all access to the app is happening through a SSL-terminating reverse proxy.
+  # Can be used together with config.force_ssl for Strict-Transport-Security and secure cookies.
+  # config.assume_ssl = true
 
   # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
-  # config.force_ssl = true
+  config.force_ssl = true
+
+  # Skip http-to-https redirect for the default health check endpoint.
+  # config.ssl_options = { redirect: { exclude: ->(request) { request.path == "/up" } } }
 
-  # Use the lowest log level to ensure availability of diagnostic information
-  # when problems arise.
-  config.log_level = :debug
+  # Log to STDOUT by default
+  config.logger = ActiveSupport::Logger.new(STDOUT)
+    .tap  { |logger| logger.formatter = ::Logger::Formatter.new }
+    .then { |logger| ActiveSupport::TaggedLogging.new(logger) }
 
   # Prepend all log lines with the following tags.
-  # config.log_tags = [ :subdomain, :uuid ]
+  config.log_tags = [ :request_id ]
 
-  # Use a different logger for distributed setups.
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+  # "info" includes generic and useful information about system operation, but avoids logging too much
+  # information to avoid inadvertent exposure of personally identifiable information (PII). If you
+  # want to log everything, set the level to "debug".
+  config.log_level = ENV.fetch("RAILS_LOG_LEVEL", "info")
 
   # Use a different cache store in production.
   # config.cache_store = :mem_cache_store
 
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
-  # config.action_controller.asset_host = 'http://assets.example.com'
+  # Use a real queuing backend for Active Job (and separate queues per environment).
+  # config.active_job.queue_adapter = :resque
+  # config.active_job.queue_name_prefix = "dummy_production"
+
+  # Disable caching for Action Mailer templates even if Action Controller
+  # caching is enabled.
+  config.action_mailer.perform_caching = false
 
   # Ignore bad email addresses and do not raise email delivery errors.
   # Set this to true and configure the email server for immediate delivery to raise delivery errors.
@@ -68,12 +80,20 @@ Rails.application.configure do
   # the I18n.default_locale when a translation cannot be found).
   config.i18n.fallbacks = true
 
-  # Send deprecation notices to registered listeners.
-  config.active_support.deprecation = :notify
-
-  # Use default logging formatter so that PID and timestamp are not suppressed.
-  config.log_formatter = ::Logger::Formatter.new
+  # Don't log any deprecations.
+  config.active_support.report_deprecations = false
 
   # Do not dump schema after migrations.
   config.active_record.dump_schema_after_migration = false
+
+  # Only use :id for inspections in production.
+  config.active_record.attributes_for_inspect = [ :id ]
+
+  # Enable DNS rebinding protection and other `Host` header attacks.
+  # config.hosts = [
+  #   "example.com",     # Allow requests from example.com
+  #   /.*\.example\.com/ # Allow requests from subdomains like `www.example.com`
+  # ]
+  # Skip DNS rebinding protection for the default health check endpoint.
+  # config.host_authorization = { exclude: ->(request) { request.path == "/up" } }
 end

data/test/dummy/config/environments/test.rb

@@ -1,42 +1,67 @@
+require "active_support/core_ext/integer/time"
+
+# The test environment is used exclusively to run your application's
+# test suite. You never need to work with it otherwise. Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs. Don't rely on the data there!
+
 Rails.application.configure do
   # Settings specified here will take precedence over those in config/application.rb.
 
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
-  config.cache_classes = true
+  # While tests run files are not watched, reloading is not necessary.
+  config.enable_reloading = false
 
-  # Do not eager load code on boot. This avoids loading your whole application
-  # just for the purpose of running a single test. If you are using a tool that
-  # preloads Rails for running tests, you may have to set it to true.
-  config.eager_load = false
+  # Eager loading loads your entire application. When running a single test locally,
+  # this is usually not necessary, and can slow down your test suite. However, it's
+  # recommended that you enable it in continuous integration systems to ensure eager
+  # loading is working properly before deploying your code.
+  config.eager_load = ENV["CI"].present?
 
-  # Configure static file server for tests with Cache-Control for performance.
-  config.serve_static_files   = true
-  config.static_cache_control = 'public, max-age=3600'
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.headers = { "Cache-Control" => "public, max-age=#{1.hour.to_i}" }
 
   # Show full error reports and disable caching.
-  config.consider_all_requests_local       = true
+  config.consider_all_requests_local = true
   config.action_controller.perform_caching = false
+  config.cache_store = :null_store
 
-  # Raise exceptions instead of rendering exception templates.
-  config.action_dispatch.show_exceptions = false
+  # Render exception templates for rescuable exceptions and raise for other exceptions.
+  config.action_dispatch.show_exceptions = :rescuable
 
   # Disable request forgery protection in test environment.
   config.action_controller.allow_forgery_protection = false
 
+  # Store uploaded files on the local file system in a temporary directory.
+  config.active_storage.service = :test
+
+  # Disable caching for Action Mailer templates even if Action Controller
+  # caching is enabled.
+  config.action_mailer.perform_caching = false
+
   # Tell Action Mailer not to deliver emails to the real world.
   # The :test delivery method accumulates sent emails in the
   # ActionMailer::Base.deliveries array.
   config.action_mailer.delivery_method = :test
 
-  # Randomize the order test cases are executed.
-  config.active_support.test_order = :random
+  # Unlike controllers, the mailer instance doesn't have any context about the
+  # incoming request so you'll need to provide the :host parameter yourself.
+  config.action_mailer.default_url_options = { host: "www.example.com" }
 
   # Print deprecation notices to the stderr.
   config.active_support.deprecation = :stderr
 
-  # Raises error for missing translations
-  # config.action_view.raise_on_missing_translations = true
+  # Raise exceptions for disallowed deprecations.
+  config.active_support.disallowed_deprecation = :raise
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
+
+  # Raise error when a before_action's only/except options reference missing actions.
+  config.action_controller.raise_on_missing_callback_actions = true
 end

data/test/dummy/config/initializers/apidae.rb

@@ -8,11 +8,13 @@ end
 
 DEFAULT_USER = DummyUser.new(1)
 
-Apidae::ApplicationController.class_eval do
-  def dummy_auth
-  end
+Rails.application.config.after_initialize do
+  Apidae::ApplicationController.class_eval do
+    def dummy_auth
+    end
 
-  def dummy_user
-    DEFAULT_USER
+    def dummy_user
+      DEFAULT_USER
+    end
   end
 end

data/test/dummy/config/initializers/content_security_policy.rb

@@ -0,0 +1,25 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide content security policy.
+# See the Securing Rails Applications Guide for more information:
+# https://guides.rubyonrails.org/security.html#content-security-policy-header
+
+# Rails.application.configure do
+#   config.content_security_policy do |policy|
+#     policy.default_src :self, :https
+#     policy.font_src    :self, :https, :data
+#     policy.img_src     :self, :https, :data
+#     policy.object_src  :none
+#     policy.script_src  :self, :https
+#     policy.style_src   :self, :https
+#     # Specify URI for violation reports
+#     # policy.report_uri "/csp-violation-report-endpoint"
+#   end
+#
+#   # Generate session nonces for permitted importmap, inline scripts, and inline styles.
+#   config.content_security_policy_nonce_generator = ->(request) { request.session.id.to_s }
+#   config.content_security_policy_nonce_directives = %w(script-src style-src)
+#
+#   # Report violations without enforcing the policy.
+#   # config.content_security_policy_report_only = true
+# end

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -1,4 +1,8 @@
 # Be sure to restart your server when you modify this file.
 
-# Configure sensitive parameters which will be filtered from the log file.
-Rails.application.config.filter_parameters += [:password]
+# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file.
+# Use this to limit dissemination of sensitive information.
+# See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors.
+Rails.application.config.filter_parameters += [
+  :passw, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
+]

data/test/dummy/config/initializers/inflections.rb

@@ -4,13 +4,13 @@
 # are locale specific, and you may define rules for as many different
 # locales as you wish. All of these examples are active by default:
 # ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
+#   inflect.plural /^(ox)$/i, "\\1en"
+#   inflect.singular /^(ox)en/i, "\\1"
+#   inflect.irregular "person", "people"
 #   inflect.uncountable %w( fish sheep )
 # end
 
 # These inflection rules are supported but not enabled by default:
 # ActiveSupport::Inflector.inflections(:en) do |inflect|
-#   inflect.acronym 'RESTful'
+#   inflect.acronym "RESTful"
 # end

data/test/dummy/config/initializers/new_framework_defaults_7_2.rb

@@ -0,0 +1,70 @@
+# Be sure to restart your server when you modify this file.
+#
+# This file eases your Rails 7.2 framework defaults upgrade.
+#
+# Uncomment each configuration one by one to switch to the new default.
+# Once your application is ready to run with all new defaults, you can remove
+# this file and set the `config.load_defaults` to `7.2`.
+#
+# Read the Guide for Upgrading Ruby on Rails for more info on each option.
+# https://guides.rubyonrails.org/upgrading_ruby_on_rails.html
+
+###
+# Controls whether Active Job's `#perform_later` and similar methods automatically defer
+# the job queuing to after the current Active Record transaction is committed.
+#
+# Example:
+#   Topic.transaction do
+#     topic = Topic.create(...)
+#     NewTopicNotificationJob.perform_later(topic)
+#   end
+#
+# In this example, if the configuration is set to `:never`, the job will
+# be enqueued immediately, even though the `Topic` hasn't been committed yet.
+# Because of this, if the job is picked up almost immediately, or if the
+# transaction doesn't succeed for some reason, the job will fail to find this
+# topic in the database.
+#
+# If `enqueue_after_transaction_commit` is set to `:default`, the queue adapter
+# will define the behaviour.
+#
+# Note: Active Job backends can disable this feature. This is generally done by
+# backends that use the same database as Active Record as a queue, hence they
+# don't need this feature.
+#++
+# Rails.application.config.active_job.enqueue_after_transaction_commit = :default
+
+###
+# Adds image/webp to the list of content types Active Storage considers as an image
+# Prevents automatic conversion to a fallback PNG, and assumes clients support WebP, as they support gif, jpeg, and png.
+# This is possible due to broad browser support for WebP, but older browsers and email clients may still not support
+# WebP. Requires imagemagick/libvips built with WebP support.
+#++
+# Rails.application.config.active_storage.web_image_content_types = %w[image/png image/jpeg image/gif image/webp]
+
+###
+# Enable validation of migration timestamps. When set, an ActiveRecord::InvalidMigrationTimestampError
+# will be raised if the timestamp prefix for a migration is more than a day ahead of the timestamp
+# associated with the current time. This is done to prevent forward-dating of migration files, which can
+# impact migration generation and other migration commands.
+#
+# Applications with existing timestamped migrations that do not adhere to the
+# expected format can disable validation by setting this config to `false`.
+#++
+# Rails.application.config.active_record.validate_migration_timestamps = true
+
+###
+# Controls whether the PostgresqlAdapter should decode dates automatically with manual queries.
+#
+# Example:
+#   ActiveRecord::ConnectionAdapters::PostgreSQLAdapter.select_value("select '2024-01-01'::date") #=> Date
+#
+# This query used to return a `String`.
+#++
+# Rails.application.config.active_record.postgresql_adapter_decode_dates = true
+
+###
+# Enables YJIT as of Ruby 3.3, to bring sizeable performance improvements. If you are
+# deploying to a memory constrained environment you may want to set this to `false`.
+#++
+# Rails.application.config.yjit = true

data/test/dummy/config/initializers/permissions_policy.rb

@@ -0,0 +1,13 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide HTTP permissions policy. For further
+# information see: https://developers.google.com/web/updates/2018/06/feature-policy
+
+# Rails.application.config.permissions_policy do |policy|
+#   policy.camera      :none
+#   policy.gyroscope   :none
+#   policy.microphone  :none
+#   policy.usb         :none
+#   policy.fullscreen  :self
+#   policy.payment     :self, "https://secure.example.com"
+# end

data/test/dummy/config/puma.rb

@@ -0,0 +1,34 @@
+# This configuration file will be evaluated by Puma. The top-level methods that
+# are invoked here are part of Puma's configuration DSL. For more information
+# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html.
+
+# Puma starts a configurable number of processes (workers) and each process
+# serves each request in a thread from an internal thread pool.
+#
+# The ideal number of threads per worker depends both on how much time the
+# application spends waiting for IO operations and on how much you wish to
+# to prioritize throughput over latency.
+#
+# As a rule of thumb, increasing the number of threads will increase how much
+# traffic a given process can handle (throughput), but due to CRuby's
+# Global VM Lock (GVL) it has diminishing returns and will degrade the
+# response time (latency) of the application.
+#
+# The default is set to 3 threads as it's deemed a decent compromise between
+# throughput and latency for the average Rails application.
+#
+# Any libraries that use a connection pool or another resource pool should
+# be configured to provide at least as many connections as the number of
+# threads. This includes Active Record's `pool` parameter in `database.yml`.
+threads_count = ENV.fetch("RAILS_MAX_THREADS", 3)
+threads threads_count, threads_count
+
+# Specifies the `port` that Puma will listen on to receive requests; default is 3000.
+port ENV.fetch("PORT", 3000)
+
+# Allow puma to be restarted by `bin/rails restart` command.
+plugin :tmp_restart
+
+# Specify the PID file. Defaults to tmp/pids/server.pid in development.
+# In other environments, only set the PID file if requested.
+pidfile ENV["PIDFILE"] if ENV["PIDFILE"]

data/test/dummy/config/storage.yml

@@ -0,0 +1,34 @@
+test:
+  service: Disk
+  root: <%= Rails.root.join("tmp/storage") %>
+
+local:
+  service: Disk
+  root: <%= Rails.root.join("storage") %>
+
+# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
+# amazon:
+#   service: S3
+#   access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
+#   secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
+#   region: us-east-1
+#   bucket: your_own_bucket-<%= Rails.env %>
+
+# Remember not to checkin your GCS keyfile to a repository
+# google:
+#   service: GCS
+#   project: your_project
+#   credentials: <%= Rails.root.join("path/to/gcs.keyfile") %>
+#   bucket: your_own_bucket-<%= Rails.env %>
+
+# Use bin/rails credentials:edit to set the Azure Storage secret (as azure_storage:storage_access_key)
+# microsoft:
+#   service: AzureStorage
+#   storage_account_name: your_account_name
+#   storage_access_key: <%= Rails.application.credentials.dig(:azure_storage, :storage_access_key) %>
+#   container: your_container_name-<%= Rails.env %>
+
+# mirror:
+#   service: Mirror
+#   primary: local
+#   mirrors: [ amazon, google, microsoft ]

data/test/dummy/db/migrate/20250129172254_add_service_name_to_active_storage_blobs.active_storage.rb

@@ -0,0 +1,22 @@
+# This migration comes from active_storage (originally 20190112182829)
+class AddServiceNameToActiveStorageBlobs < ActiveRecord::Migration[6.0]
+  def up
+    return unless table_exists?(:active_storage_blobs)
+
+    unless column_exists?(:active_storage_blobs, :service_name)
+      add_column :active_storage_blobs, :service_name, :string
+
+      if configured_service = ActiveStorage::Blob.service.name
+        ActiveStorage::Blob.unscoped.update_all(service_name: configured_service)
+      end
+
+      change_column :active_storage_blobs, :service_name, :string, null: false
+    end
+  end
+
+  def down
+    return unless table_exists?(:active_storage_blobs)
+
+    remove_column :active_storage_blobs, :service_name
+  end
+end

data/test/dummy/db/migrate/20250129172255_create_active_storage_variant_records.active_storage.rb

@@ -0,0 +1,27 @@
+# This migration comes from active_storage (originally 20191206030411)
+class CreateActiveStorageVariantRecords < ActiveRecord::Migration[6.0]
+  def change
+    return unless table_exists?(:active_storage_blobs)
+
+    # Use Active Record's configured type for primary key
+    create_table :active_storage_variant_records, id: primary_key_type, if_not_exists: true do |t|
+      t.belongs_to :blob, null: false, index: false, type: blobs_primary_key_type
+      t.string :variation_digest, null: false
+
+      t.index %i[ blob_id variation_digest ], name: "index_active_storage_variant_records_uniqueness", unique: true
+      t.foreign_key :active_storage_blobs, column: :blob_id
+    end
+  end
+
+  private
+    def primary_key_type
+      config = Rails.configuration.generators
+      config.options[config.orm][:primary_key_type] || :primary_key
+    end
+
+    def blobs_primary_key_type
+      pkey_name = connection.primary_key(:active_storage_blobs)
+      pkey_column = connection.columns(:active_storage_blobs).find { |c| c.name == pkey_name }
+      pkey_column.bigint? ? :bigint : pkey_column.type
+    end
+end

data/test/dummy/db/migrate/20250129172256_remove_not_null_on_active_storage_blobs_checksum.active_storage.rb

@@ -0,0 +1,8 @@
+# This migration comes from active_storage (originally 20211119233751)
+class RemoveNotNullOnActiveStorageBlobsChecksum < ActiveRecord::Migration[6.0]
+  def change
+    return unless table_exists?(:active_storage_blobs)
+
+    change_column_null(:active_storage_blobs, :checksum, true)
+  end
+end

data/test/dummy/public/404.html

@@ -4,7 +4,7 @@
   <title>The page you were looking for doesn't exist (404)</title>
   <meta name="viewport" content="width=device-width,initial-scale=1">
   <style>
-  body {
+  .rails-default-error-page {
     background-color: #EFEFEF;
     color: #2E2F30;
     text-align: center;
@@ -12,13 +12,13 @@
     margin: 0;
   }
 
-  div.dialog {
+  .rails-default-error-page div.dialog {
     width: 95%;
     max-width: 33em;
     margin: 4em auto 0;
   }
 
-  div.dialog > div {
+  .rails-default-error-page div.dialog > div {
     border: 1px solid #CCC;
     border-right-color: #999;
     border-left-color: #999;
@@ -31,13 +31,13 @@
     box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
   }
 
-  h1 {
+  .rails-default-error-page h1 {
     font-size: 100%;
     color: #730E15;
     line-height: 1.5em;
   }
 
-  div.dialog > p {
+  .rails-default-error-page div.dialog > p {
     margin: 0 0 1em;
     padding: 1em;
     background-color: #F7F7F7;
@@ -54,7 +54,7 @@
   </style>
 </head>
 
-<body>
+<body class="rails-default-error-page">
   <!-- This file lives in public/404.html -->
   <div class="dialog">
     <div>

data/test/dummy/public/406-unsupported-browser.html

@@ -0,0 +1,66 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Your browser is not supported (406)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  .rails-default-error-page {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  .rails-default-error-page div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  .rails-default-error-page div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  .rails-default-error-page h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  .rails-default-error-page div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body class="rails-default-error-page">
+  <!-- This file lives in public/406-unsupported-browser.html -->
+  <div class="dialog">
+    <div>
+      <h1>Your browser is not supported.</h1>
+      <p>Please upgrade your browser to continue.</p>
+    </div>
+  </div>
+</body>
+</html>