amalgalite 1.6.1-x64-mingw32 → 1.6.3-x64-mingw32

data/ext/amalgalite/c/sqlite3.h

@@ -108,7 +108,7 @@ extern "C" {
 ** be held constant and Z will be incremented or else Y will be incremented
 ** and Z will be reset to zero.
 **
-** Since [version 3.6.18] ([dateof:3.6.18]),
+** Since [version 3.6.18] ([dateof:3.6.18]), 
 ** SQLite source code has been stored in the
 ** <a href="http://www.fossil-scm.org/">Fossil configuration management
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
@@ -123,9 +123,9 @@ extern "C" {
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.21.0"
-#define SQLITE_VERSION_NUMBER 3021000
-#define SQLITE_SOURCE_ID      "2017-10-24 18:55:49 1a584e499906b5c87ec7d43d4abce641fdf017c42125b083109bc77c4de48827"
+#define SQLITE_VERSION        "3.26.0"
+#define SQLITE_VERSION_NUMBER 3026000
+#define SQLITE_SOURCE_ID      "2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238b4f9"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
@@ -151,7 +151,7 @@ extern "C" {
 ** function is provided for use in DLLs since DLL users usually do not have
 ** direct access to string constants within the DLL.  ^The
 ** sqlite3_libversion_number() function returns an integer equal to
-** [SQLITE_VERSION_NUMBER].  ^(The sqlite3_sourceid() function returns
+** [SQLITE_VERSION_NUMBER].  ^(The sqlite3_sourceid() function returns 
 ** a pointer to a string constant whose value is the same as the 
 ** [SQLITE_SOURCE_ID] C preprocessor macro.  Except if SQLite is built
 ** using an edited copy of [the amalgamation], then the last four characters
@@ -265,7 +265,7 @@ typedef struct sqlite3 sqlite3;
   typedef SQLITE_INT64_TYPE sqlite_int64;
 # ifdef SQLITE_UINT64_TYPE
     typedef SQLITE_UINT64_TYPE sqlite_uint64;
-# else
+# else  
     typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
 # endif
 #elif defined(_MSC_VER) || defined(__BORLANDC__)
@@ -470,6 +470,9 @@ SQLITE_API int sqlite3_exec(
 ** the most recent error can be obtained using
 ** [sqlite3_extended_errcode()].
 */
+#define SQLITE_ERROR_MISSING_COLLSEQ   (SQLITE_ERROR | (1<<8))
+#define SQLITE_ERROR_RETRY             (SQLITE_ERROR | (2<<8))
+#define SQLITE_ERROR_SNAPSHOT          (SQLITE_ERROR | (3<<8))
 #define SQLITE_IOERR_READ              (SQLITE_IOERR | (1<<8))
 #define SQLITE_IOERR_SHORT_READ        (SQLITE_IOERR | (2<<8))
 #define SQLITE_IOERR_WRITE             (SQLITE_IOERR | (3<<8))
@@ -502,17 +505,22 @@ SQLITE_API int sqlite3_exec(
 #define SQLITE_IOERR_COMMIT_ATOMIC     (SQLITE_IOERR | (30<<8))
 #define SQLITE_IOERR_ROLLBACK_ATOMIC   (SQLITE_IOERR | (31<<8))
 #define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
+#define SQLITE_LOCKED_VTAB             (SQLITE_LOCKED |  (2<<8))
 #define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
 #define SQLITE_BUSY_SNAPSHOT           (SQLITE_BUSY   |  (2<<8))
 #define SQLITE_CANTOPEN_NOTEMPDIR      (SQLITE_CANTOPEN | (1<<8))
 #define SQLITE_CANTOPEN_ISDIR          (SQLITE_CANTOPEN | (2<<8))
 #define SQLITE_CANTOPEN_FULLPATH       (SQLITE_CANTOPEN | (3<<8))
 #define SQLITE_CANTOPEN_CONVPATH       (SQLITE_CANTOPEN | (4<<8))
+#define SQLITE_CANTOPEN_DIRTYWAL       (SQLITE_CANTOPEN | (5<<8)) /* Not Used */
 #define SQLITE_CORRUPT_VTAB            (SQLITE_CORRUPT | (1<<8))
+#define SQLITE_CORRUPT_SEQUENCE        (SQLITE_CORRUPT | (2<<8))
 #define SQLITE_READONLY_RECOVERY       (SQLITE_READONLY | (1<<8))
 #define SQLITE_READONLY_CANTLOCK       (SQLITE_READONLY | (2<<8))
 #define SQLITE_READONLY_ROLLBACK       (SQLITE_READONLY | (3<<8))
 #define SQLITE_READONLY_DBMOVED        (SQLITE_READONLY | (4<<8))
+#define SQLITE_READONLY_CANTINIT       (SQLITE_READONLY | (5<<8))
+#define SQLITE_READONLY_DIRECTORY      (SQLITE_READONLY | (6<<8))
 #define SQLITE_ABORT_ROLLBACK          (SQLITE_ABORT | (2<<8))
 #define SQLITE_CONSTRAINT_CHECK        (SQLITE_CONSTRAINT | (1<<8))
 #define SQLITE_CONSTRAINT_COMMITHOOK   (SQLITE_CONSTRAINT | (2<<8))
@@ -880,7 +888,8 @@ struct sqlite3_io_methods {
 ** <li>[[SQLITE_FCNTL_PERSIST_WAL]]
 ** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
 ** persistent [WAL | Write Ahead Log] setting.  By default, the auxiliary
-** write ahead log and shared memory files used for transaction control
+** write ahead log ([WAL file]) and shared memory
+** files used for transaction control
 ** are automatically deleted when the latest connection to the database
 ** closes.  Setting persistent WAL mode causes those files to persist after
 ** close.  Persisting the files is useful when other processes that do not
@@ -1042,7 +1051,7 @@ struct sqlite3_io_methods {
 **
 ** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
 ** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
-** operations since the previous successful call to
+** operations since the previous successful call to 
 ** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
 ** This file control returns [SQLITE_OK] if and only if the writes were
 ** all performed successfully and have been committed to persistent storage.
@@ -1054,12 +1063,38 @@ struct sqlite3_io_methods {
 **
 ** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
 ** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
-** operations since the previous successful call to
+** operations since the previous successful call to 
 ** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
 ** ^This file control takes the file descriptor out of batch write mode
 ** so that all subsequent write operations are independent.
 ** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
 ** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_LOCK_TIMEOUT]]
+** The [SQLITE_FCNTL_LOCK_TIMEOUT] opcode causes attempts to obtain
+** a file lock using the xLock or xShmLock methods of the VFS to wait
+** for up to M milliseconds before failing, where M is the single 
+** unsigned integer parameter.
+**
+** <li>[[SQLITE_FCNTL_DATA_VERSION]]
+** The [SQLITE_FCNTL_DATA_VERSION] opcode is used to detect changes to
+** a database file.  The argument is a pointer to a 32-bit unsigned integer.
+** The "data version" for the pager is written into the pointer.  The
+** "data version" changes whenever any change occurs to the corresponding
+** database file, either through SQL statements on the same database
+** connection or through transactions committed by separate database
+** connections possibly in other processes. The [sqlite3_total_changes()]
+** interface can be used to find if any database on the connection has changed,
+** but that interface responds to changes on TEMP as well as MAIN and does
+** not provide a mechanism to detect changes to MAIN only.  Also, the
+** [sqlite3_total_changes()] interface responds to internal changes only and
+** omits changes made by other database connections.  The
+** [PRAGMA data_version] command provide a mechanism to detect changes to
+** a single attached database that occur due to other database connections,
+** but omits changes implemented by the database connection on which it is
+** called.  This file control is the only mechanism to detect changes that
+** happen either internally or externally and that are associated with
+** a particular attached database.
 ** </ul>
 */
 #define SQLITE_FCNTL_LOCKSTATE               1
@@ -1094,6 +1129,8 @@ struct sqlite3_io_methods {
 #define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE     31
 #define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE    32
 #define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE  33
+#define SQLITE_FCNTL_LOCK_TIMEOUT           34
+#define SQLITE_FCNTL_DATA_VERSION           35
 
 /* deprecated names */
 #define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
@@ -1131,12 +1168,18 @@ typedef struct sqlite3_api_routines sqlite3_api_routines;
 ** in the name of the object stands for "virtual file system".  See
 ** the [VFS | VFS documentation] for further information.
 **
-** The value of the iVersion field is initially 1 but may be larger in
-** future versions of SQLite.  Additional fields may be appended to this
-** object when the iVersion value is increased.  Note that the structure
-** of the sqlite3_vfs object changes in the transaction between
-** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
-** modified.
+** The VFS interface is sometimes extended by adding new methods onto
+** the end.  Each time such an extension occurs, the iVersion field
+** is incremented.  The iVersion value started out as 1 in
+** SQLite [version 3.5.0] on [dateof:3.5.0], then increased to 2
+** with SQLite [version 3.7.0] on [dateof:3.7.0], and then increased
+** to 3 with SQLite [version 3.7.6] on [dateof:3.7.6].  Additional fields
+** may be appended to the sqlite3_vfs object and the iVersion value
+** may increase again in future versions of SQLite.
+** Note that the structure
+** of the sqlite3_vfs object changes in the transition from
+** SQLite [version 3.5.9] to [version 3.6.0] on [dateof:3.6.0]
+** and yet the iVersion field was not modified.
 **
 ** The szOsFile field is the size of the subclassed [sqlite3_file]
 ** structure used by this VFS.  mxPathname is the maximum length of
@@ -1903,7 +1946,7 @@ struct sqlite3_mem_methods {
 ** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
 ** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
 ** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
-** becomes the [statement journal] spill-to-disk threshold.
+** becomes the [statement journal] spill-to-disk threshold.  
 ** [Statement journals] are held in memory until their size (in bytes)
 ** exceeds this threshold, at which point they are written to disk.
 ** Or if the threshold is -1, statement journals are always held
@@ -1913,6 +1956,22 @@ struct sqlite3_mem_methods {
 ** I/O required to support statement rollback.
 ** The default value for this setting is controlled by the
 ** [SQLITE_STMTJRNL_SPILL] compile-time option.
+**
+** [[SQLITE_CONFIG_SORTERREF_SIZE]]
+** <dt>SQLITE_CONFIG_SORTERREF_SIZE
+** <dd>The SQLITE_CONFIG_SORTERREF_SIZE option accepts a single parameter
+** of type (int) - the new value of the sorter-reference size threshold.
+** Usually, when SQLite uses an external sort to order records according
+** to an ORDER BY clause, all fields required by the caller are present in the
+** sorted records. However, if SQLite determines based on the declared type
+** of a table column that its values are likely to be very large - larger
+** than the configured sorter-reference size threshold - then a reference
+** is stored in each sorted record and the required column values loaded
+** from the database as records are returned in sorted order. The default
+** value for this option is to never use this optimization. Specifying a 
+** negative value for this option restores the default behaviour.
+** This option is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_SORTER_REFERENCES] compile-time option.
 ** </dl>
 */
 #define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
@@ -1942,6 +2001,7 @@ struct sqlite3_mem_methods {
 #define SQLITE_CONFIG_PMASZ               25  /* unsigned int szPma */
 #define SQLITE_CONFIG_STMTJRNL_SPILL      26  /* int nByte */
 #define SQLITE_CONFIG_SMALL_MALLOC        27  /* boolean */
+#define SQLITE_CONFIG_SORTERREF_SIZE      28  /* int nByte */
 
 /*
 ** CAPI3REF: Database Connection Configuration Options
@@ -1957,6 +2017,7 @@ struct sqlite3_mem_methods {
 ** is invoked.
 **
 ** <dl>
+** [[SQLITE_DBCONFIG_LOOKASIDE]]
 ** <dt>SQLITE_DBCONFIG_LOOKASIDE</dt>
 ** <dd> ^This option takes three additional arguments that determine the 
 ** [lookaside memory allocator] configuration for the [database connection].
@@ -1979,6 +2040,7 @@ struct sqlite3_mem_methods {
 ** memory is in use leaves the configuration unchanged and returns 
 ** [SQLITE_BUSY].)^</dd>
 **
+** [[SQLITE_DBCONFIG_ENABLE_FKEY]]
 ** <dt>SQLITE_DBCONFIG_ENABLE_FKEY</dt>
 ** <dd> ^This option is used to enable or disable the enforcement of
 ** [foreign key constraints].  There should be two additional arguments.
@@ -1989,6 +2051,7 @@ struct sqlite3_mem_methods {
 ** following this call.  The second parameter may be a NULL pointer, in
 ** which case the FK enforcement setting is not reported back. </dd>
 **
+** [[SQLITE_DBCONFIG_ENABLE_TRIGGER]]
 ** <dt>SQLITE_DBCONFIG_ENABLE_TRIGGER</dt>
 ** <dd> ^This option is used to enable or disable [CREATE TRIGGER | triggers].
 ** There should be two additional arguments.
@@ -1999,6 +2062,7 @@ struct sqlite3_mem_methods {
 ** following this call.  The second parameter may be a NULL pointer, in
 ** which case the trigger setting is not reported back. </dd>
 **
+** [[SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER]]
 ** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
 ** <dd> ^This option is used to enable or disable the two-argument
 ** version of the [fts3_tokenizer()] function which is part of the
@@ -2012,6 +2076,7 @@ struct sqlite3_mem_methods {
 ** following this call.  The second parameter may be a NULL pointer, in
 ** which case the new setting is not reported back. </dd>
 **
+** [[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION]]
 ** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
 ** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
 ** interface independently of the [load_extension()] SQL function.
@@ -2029,7 +2094,7 @@ struct sqlite3_mem_methods {
 ** be a NULL pointer, in which case the new setting is not reported back.
 ** </dd>
 **
-** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** [[SQLITE_DBCONFIG_MAINDBNAME]] <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
 ** <dd> ^This option is used to change the name of the "main" database
 ** schema.  ^The sole argument is a pointer to a constant UTF8 string
 ** which will become the new schema name in place of "main".  ^SQLite
@@ -2038,19 +2103,21 @@ struct sqlite3_mem_methods {
 ** until after the database connection closes.
 ** </dd>
 **
+** [[SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE]] 
 ** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
-** <dd> Usually, when a database in wal mode is closed or detached from a
-** database handle, SQLite checks if this will mean that there are now no
-** connections at all to the database. If so, it performs a checkpoint
+** <dd> Usually, when a database in wal mode is closed or detached from a 
+** database handle, SQLite checks if this will mean that there are now no 
+** connections at all to the database. If so, it performs a checkpoint 
 ** operation before closing the connection. This option may be used to
 ** override this behaviour. The first parameter passed to this operation
-** is an integer - non-zero to disable checkpoints-on-close, or zero (the
-** default) to enable them. The second parameter is a pointer to an integer
+** is an integer - positive to disable checkpoints-on-close, or zero (the
+** default) to enable them, and negative to leave the setting unchanged.
+** The second parameter is a pointer to an integer
 ** into which is written 0 or 1 to indicate whether checkpoints-on-close
 ** have been disabled - 0 if they are not disabled, 1 if they are.
 ** </dd>
 **
-** <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt>
+** [[SQLITE_DBCONFIG_ENABLE_QPSG]] <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt>
 ** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates
 ** the [query planner stability guarantee] (QPSG).  When the QPSG is active,
 ** a single SQL query statement will always use the same algorithm regardless
@@ -2059,8 +2126,57 @@ struct sqlite3_mem_methods {
 ** slower.  But the QPSG has the advantage of more predictable behavior.  With
 ** the QPSG active, SQLite will always use the same query plan in the field as
 ** was used during testing in the lab.
+** The first argument to this setting is an integer which is 0 to disable 
+** the QPSG, positive to enable QPSG, or negative to leave the setting
+** unchanged. The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether the QPSG is disabled or enabled
+** following this call.
 ** </dd>
 **
+** [[SQLITE_DBCONFIG_TRIGGER_EQP]] <dt>SQLITE_DBCONFIG_TRIGGER_EQP</dt>
+** <dd> By default, the output of EXPLAIN QUERY PLAN commands does not 
+** include output for any operations performed by trigger programs. This
+** option is used to set or clear (the default) a flag that governs this
+** behavior. The first parameter passed to this operation is an integer -
+** positive to enable output for trigger programs, or zero to disable it,
+** or negative to leave the setting unchanged.
+** The second parameter is a pointer to an integer into which is written 
+** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if 
+** it is not disabled, 1 if it is.  
+** </dd>
+**
+** [[SQLITE_DBCONFIG_RESET_DATABASE]] <dt>SQLITE_DBCONFIG_RESET_DATABASE</dt>
+** <dd> Set the SQLITE_DBCONFIG_RESET_DATABASE flag and then run
+** [VACUUM] in order to reset a database back to an empty database
+** with no schema and no content. The following process works even for
+** a badly corrupted database file:
+** <ol>
+** <li> If the database connection is newly opened, make sure it has read the
+**      database schema by preparing then discarding some query against the
+**      database, or calling sqlite3_table_column_metadata(), ignoring any
+**      errors.  This step is only necessary if the application desires to keep
+**      the database in WAL mode after the reset if it was in WAL mode before
+**      the reset.  
+** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0);
+** <li> [sqlite3_exec](db, "[VACUUM]", 0, 0, 0);
+** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0);
+** </ol>
+** Because resetting a database is destructive and irreversible, the
+** process requires the use of this obscure API and multiple steps to help
+** ensure that it does not happen by accident.
+**
+** [[SQLITE_DBCONFIG_DEFENSIVE]] <dt>SQLITE_DBCONFIG_DEFENSIVE</dt>
+** <dd>The SQLITE_DBCONFIG_DEFENSIVE option activates or deactivates the
+** "defensive" flag for a database connection.  When the defensive
+** flag is enabled, language features that allow ordinary SQL to 
+** deliberately corrupt the database file are disabled.  The disabled
+** features include but are not limited to the following:
+** <ul>
+** <li> The [PRAGMA writable_schema=ON] statement.
+** <li> Writes to the [sqlite_dbpage] virtual table.
+** <li> Direct writes to [shadow tables].
+** </ul>
+** </dd>
 ** </dl>
 */
 #define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
@@ -2071,7 +2187,10 @@ struct sqlite3_mem_methods {
 #define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
 #define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
 #define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
-
+#define SQLITE_DBCONFIG_TRIGGER_EQP           1008 /* int int* */
+#define SQLITE_DBCONFIG_RESET_DATABASE        1009 /* int int* */
+#define SQLITE_DBCONFIG_DEFENSIVE             1010 /* int int* */
+#define SQLITE_DBCONFIG_MAX                   1010 /* Largest DBCONFIG */
 
 /*
 ** CAPI3REF: Enable Or Disable Extended Result Codes
@@ -2098,8 +2217,8 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 ** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of
 ** the most recent successful [INSERT] into a rowid table or [virtual table]
 ** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not
-** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred
-** on the database connection D, then sqlite3_last_insert_rowid(D) returns
+** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred 
+** on the database connection D, then sqlite3_last_insert_rowid(D) returns 
 ** zero.
 **
 ** As well as being set automatically as rows are inserted into database
@@ -2109,15 +2228,15 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 ** Some virtual table implementations may INSERT rows into rowid tables as
 ** part of committing a transaction (e.g. to flush data accumulated in memory
 ** to disk). In this case subsequent calls to this function return the rowid
-** associated with these internal INSERT operations, which leads to
+** associated with these internal INSERT operations, which leads to 
 ** unintuitive results. Virtual table implementations that do write to rowid
-** tables in this way can avoid this problem by restoring the original
-** rowid value using [sqlite3_set_last_insert_rowid()] before returning
+** tables in this way can avoid this problem by restoring the original 
+** rowid value using [sqlite3_set_last_insert_rowid()] before returning 
 ** control to the user.
 **
-** ^(If an [INSERT] occurs within a trigger then this routine will
-** return the [rowid] of the inserted row as long as the trigger is
-** running. Once the trigger program ends, the value returned
+** ^(If an [INSERT] occurs within a trigger then this routine will 
+** return the [rowid] of the inserted row as long as the trigger is 
+** running. Once the trigger program ends, the value returned 
 ** by this routine reverts to what it was before the trigger was fired.)^
 **
 ** ^An [INSERT] that fails due to a constraint violation is not a
@@ -2150,7 +2269,7 @@ SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
 ** METHOD: sqlite3
 **
 ** The sqlite3_set_last_insert_rowid(D, R) method allows the application to
-** set the value returned by calling sqlite3_last_insert_rowid(D) to R
+** set the value returned by calling sqlite3_last_insert_rowid(D) to R 
 ** without inserting a row into the database.
 */
 SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64);
@@ -2199,12 +2318,17 @@ SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64);
 ** program, the value returned reflects the number of rows modified by the 
 ** previous INSERT, UPDATE or DELETE statement within the same trigger.
 **
-** See also the [sqlite3_total_changes()] interface, the
-** [count_changes pragma], and the [changes() SQL function].
-**
 ** If a separate thread makes changes on the same database connection
 ** while [sqlite3_changes()] is running then the value returned
 ** is unpredictable and not meaningful.
+**
+** See also:
+** <ul>
+** <li> the [sqlite3_total_changes()] interface
+** <li> the [count_changes pragma]
+** <li> the [changes() SQL function]
+** <li> the [data_version pragma]
+** </ul>
 */
 SQLITE_API int sqlite3_changes(sqlite3*);
 
@@ -2222,13 +2346,26 @@ SQLITE_API int sqlite3_changes(sqlite3*);
 ** count, but those made as part of REPLACE constraint resolution are
 ** not. ^Changes to a view that are intercepted by INSTEAD OF triggers 
 ** are not counted.
-** 
-** See also the [sqlite3_changes()] interface, the
-** [count_changes pragma], and the [total_changes() SQL function].
 **
+** This the [sqlite3_total_changes(D)] interface only reports the number
+** of rows that changed due to SQL statement run against database
+** connection D.  Any changes by other database connections are ignored.
+** To detect changes against a database file from other database
+** connections use the [PRAGMA data_version] command or the
+** [SQLITE_FCNTL_DATA_VERSION] [file control].
+** 
 ** If a separate thread makes changes on the same database connection
 ** while [sqlite3_total_changes()] is running then the value
 ** returned is unpredictable and not meaningful.
+**
+** See also:
+** <ul>
+** <li> the [sqlite3_changes()] interface
+** <li> the [count_changes pragma]
+** <li> the [changes() SQL function]
+** <li> the [data_version pragma]
+** <li> the [SQLITE_FCNTL_DATA_VERSION] [file control]
+** </ul>
 */
 SQLITE_API int sqlite3_total_changes(sqlite3*);
 
@@ -2477,16 +2614,16 @@ SQLITE_API void sqlite3_free_table(char **result);
 **
 ** These routines are work-alikes of the "printf()" family of functions
 ** from the standard C library.
-** These routines understand most of the common K&R formatting options,
-** plus some additional non-standard formats, detailed below.
-** Note that some of the more obscure formatting options from recent
-** C-library standards are omitted from this implementation.
+** These routines understand most of the common formatting options from
+** the standard library printf() 
+** plus some additional non-standard formats ([%q], [%Q], [%w], and [%z]).
+** See the [built-in printf()] documentation for details.
 **
 ** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
-** results into memory obtained from [sqlite3_malloc()].
+** results into memory obtained from [sqlite3_malloc64()].
 ** The strings returned by these two routines should be
 ** released by [sqlite3_free()].  ^Both routines return a
-** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
+** NULL pointer if [sqlite3_malloc64()] is unable to allocate enough
 ** memory to hold the resulting string.
 **
 ** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from
@@ -2510,71 +2647,7 @@ SQLITE_API void sqlite3_free_table(char **result);
 **
 ** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
 **
-** These routines all implement some additional formatting
-** options that are useful for constructing SQL statements.
-** All of the usual printf() formatting options apply.  In addition, there
-** is are "%q", "%Q", "%w" and "%z" options.
-**
-** ^(The %q option works like %s in that it substitutes a nul-terminated
-** string from the argument list.  But %q also doubles every '\'' character.
-** %q is designed for use inside a string literal.)^  By doubling each '\''
-** character it escapes that character and allows it to be inserted into
-** the string.
-**
-** For example, assume the string variable zText contains text as follows:
-**
-** <blockquote><pre>
-**  char *zText = "It's a happy day!";
-** </pre></blockquote>
-**
-** One can use this text in an SQL statement as follows:
-**
-** <blockquote><pre>
-**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-** </pre></blockquote>
-**
-** Because the %q format string is used, the '\'' character in zText
-** is escaped and the SQL generated is as follows:
-**
-** <blockquote><pre>
-**  INSERT INTO table1 VALUES('It''s a happy day!')
-** </pre></blockquote>
-**
-** This is correct.  Had we used %s instead of %q, the generated SQL
-** would have looked like this:
-**
-** <blockquote><pre>
-**  INSERT INTO table1 VALUES('It's a happy day!');
-** </pre></blockquote>
-**
-** This second example is an SQL syntax error.  As a general rule you should
-** always use %q instead of %s when inserting text into a string literal.
-**
-** ^(The %Q option works like %q except it also adds single quotes around
-** the outside of the total string.  Additionally, if the parameter in the
-** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
-** single quotes).)^  So, for example, one could say:
-**
-** <blockquote><pre>
-**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-** </pre></blockquote>
-**
-** The code above will render a correct SQL statement in the zSQL
-** variable even if the zText variable is a NULL pointer.
-**
-** ^(The "%w" formatting option is like "%q" except that it expects to
-** be contained within double-quotes instead of single quotes, and it
-** escapes the double-quote character instead of the single-quote
-** character.)^  The "%w" formatting option is intended for safely inserting
-** table and column names into a constructed SQL statement.
-**
-** ^(The "%z" formatting option works like "%s" but with the
-** addition that after the string has been read and copied into
-** the result, [sqlite3_free()] is called on the input string.)^
+** See also:  [built-in printf()], [printf() SQL function]
 */
 SQLITE_API char *sqlite3_mprintf(const char*,...);
 SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
@@ -2932,8 +3005,8 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
 ** KEYWORDS: SQLITE_TRACE
 **
 ** These constants identify classes of events that can be monitored
-** using the [sqlite3_trace_v2()] tracing logic.  The third argument
-** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of
+** using the [sqlite3_trace_v2()] tracing logic.  The M argument
+** to [sqlite3_trace_v2(D,M,X,P)] is an OR-ed combination of one or more of
 ** the following constants.  ^The first argument to the trace callback
 ** is one of the following constants.
 **
@@ -2952,7 +3025,7 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
 ** execution of the prepared statement, such as at the start of each
 ** trigger subprogram. ^The P argument is a pointer to the
 ** [prepared statement]. ^The X argument is a pointer to a string which
-** is the unexpanded SQL text of the prepared statement or an SQL comment
+** is the unexpanded SQL text of the prepared statement or an SQL comment 
 ** that indicates the invocation of a trigger.  ^The callback can compute
 ** the same text that would have been returned by the legacy [sqlite3_trace()]
 ** interface by using the X argument when X begins with "--" and invoking
@@ -2968,7 +3041,7 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
 **
 ** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
 ** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
-** statement generates a single row of result.
+** statement generates a single row of result.  
 ** ^The P argument is a pointer to the [prepared statement] and the
 ** X argument is unused.
 **
@@ -2995,10 +3068,10 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
 ** M argument should be the bitwise OR-ed combination of
 ** zero or more [SQLITE_TRACE] constants.
 **
-** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides 
 ** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
 **
-** ^The X callback is invoked whenever any of the events identified by
+** ^The X callback is invoked whenever any of the events identified by 
 ** mask M occur.  ^The integer return value from the callback is currently
 ** ignored, though this may change in future releases.  Callback
 ** implementations should return zero to ensure future compatibility.
@@ -3348,13 +3421,24 @@ SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int
 ** [database connection] D failed, then the sqlite3_errcode(D) interface
 ** returns the numeric [result code] or [extended result code] for that
 ** API call.
-** If the most recent API call was successful,
-** then the return value from sqlite3_errcode() is undefined.
 ** ^The sqlite3_extended_errcode()
 ** interface is the same except that it always returns the 
 ** [extended result code] even when extended result codes are
 ** disabled.
 **
+** The values returned by sqlite3_errcode() and/or
+** sqlite3_extended_errcode() might change with each API call.
+** Except, there are some interfaces that are guaranteed to never
+** change the value of the error code.  The error-code preserving
+** interfaces are:
+**
+** <ul>
+** <li> sqlite3_errcode()
+** <li> sqlite3_extended_errcode()
+** <li> sqlite3_errmsg()
+** <li> sqlite3_errmsg16()
+** </ul>
+**
 ** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
 ** text that describes the error, as either UTF-8 or UTF-16 respectively.
 ** ^(Memory to hold the error message string is managed internally.
@@ -3538,15 +3622,25 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
 ** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner
 ** that the prepared statement will be retained for a long time and
 ** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()]
-** and [sqlite3_prepare16_v3()] assume that the prepared statement will
+** and [sqlite3_prepare16_v3()] assume that the prepared statement will 
 ** be used just once or at most a few times and then destroyed using
 ** [sqlite3_finalize()] relatively soon. The current implementation acts
 ** on this hint by avoiding the use of [lookaside memory] so as not to
 ** deplete the limited store of lookaside memory. Future versions of
 ** SQLite may act on this hint differently.
+**
+** [[SQLITE_PREPARE_NORMALIZE]] ^(<dt>SQLITE_PREPARE_NORMALIZE</dt>
+** <dd>The SQLITE_PREPARE_NORMALIZE flag indicates that a normalized
+** representation of the SQL statement should be calculated and then
+** associated with the prepared statement, which can be obtained via
+** the [sqlite3_normalized_sql()] interface.)^  The semantics used to
+** normalize a SQL statement are unspecified and subject to change.
+** At a minimum, literal values will be replaced with suitable
+** placeholders.
 ** </dl>
 */
 #define SQLITE_PREPARE_PERSISTENT              0x01
+#define SQLITE_PREPARE_NORMALIZE               0x02
 
 /*
 ** CAPI3REF: Compiling An SQL Statement
@@ -3640,13 +3734,13 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
 ** or [GLOB] operator or if the parameter is compared to an indexed column
 ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
 ** </li>
+** </ol>
 **
 ** <p>^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having
 ** the extra prepFlags parameter, which is a bit array consisting of zero or
 ** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags.  ^The
 ** sqlite3_prepare_v2() interface works exactly the same as
 ** sqlite3_prepare_v3() with a zero prepFlags parameter.
-** </ol>
 */
 SQLITE_API int sqlite3_prepare(
   sqlite3 *db,            /* Database handle */
@@ -3704,6 +3798,11 @@ SQLITE_API int sqlite3_prepare16_v3(
 ** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
 ** string containing the SQL text of prepared statement P with
 ** [bound parameters] expanded.
+** ^The sqlite3_normalized_sql(P) interface returns a pointer to a UTF-8
+** string containing the normalized SQL text of prepared statement P.  The
+** semantics used to normalize a SQL statement are unspecified and subject
+** to change.  At a minimum, literal values will be replaced with suitable
+** placeholders.
 **
 ** ^(For example, if a prepared statement is created using the SQL
 ** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
@@ -3719,14 +3818,16 @@ SQLITE_API int sqlite3_prepare16_v3(
 ** bound parameter expansions.  ^The [SQLITE_OMIT_TRACE] compile-time
 ** option causes sqlite3_expanded_sql() to always return NULL.
 **
-** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
-** automatically freed when the prepared statement is finalized.
+** ^The strings returned by sqlite3_sql(P) and sqlite3_normalized_sql(P)
+** are managed by SQLite and are automatically freed when the prepared
+** statement is finalized.
 ** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
 ** is obtained from [sqlite3_malloc()] and must be free by the application
 ** by passing it to [sqlite3_free()].
 */
 SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
 SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_normalized_sql(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Writes The Database
@@ -4055,7 +4156,7 @@ SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
 ** METHOD: sqlite3_stmt
 **
 ** ^Return the number of columns in the result set returned by the
-** [prepared statement]. ^If this routine returns 0, that means the
+** [prepared statement]. ^If this routine returns 0, that means the 
 ** [prepared statement] returns no data (for example an [UPDATE]).
 ** ^However, just because this routine returns a positive number does not
 ** mean that one or more rows of data will be returned.  ^A SELECT statement
@@ -4332,7 +4433,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 ** <tr><td><b>sqlite3_column_int64</b><td>&rarr;<td>64-bit INTEGER result
 ** <tr><td><b>sqlite3_column_text</b><td>&rarr;<td>UTF-8 TEXT result
 ** <tr><td><b>sqlite3_column_text16</b><td>&rarr;<td>UTF-16 TEXT result
-** <tr><td><b>sqlite3_column_value</b><td>&rarr;<td>The result as an
+** <tr><td><b>sqlite3_column_value</b><td>&rarr;<td>The result as an 
 ** [sqlite3_value|unprotected sqlite3_value] object.
 ** <tr><td>&nbsp;<td>&nbsp;<td>&nbsp;
 ** <tr><td><b>sqlite3_column_bytes</b><td>&rarr;<td>Size of a BLOB
@@ -4380,7 +4481,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 ** The return value of sqlite3_column_type() can be used to decide which
 ** of the first six interface should be used to extract the column value.
 ** The value returned by sqlite3_column_type() is only meaningful if no
-** automatic type conversions have occurred for the value in question.
+** automatic type conversions have occurred for the value in question.  
 ** After a type conversion, the result of calling sqlite3_column_type()
 ** is undefined, though harmless.  Future
 ** versions of SQLite may change the behavior of sqlite3_column_type()
@@ -4427,7 +4528,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 ** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
 ** or [sqlite3_value_bytes()], the behavior is not threadsafe.
 ** Hence, the sqlite3_column_value() interface
-** is normally only useful within the implementation of
+** is normally only useful within the implementation of 
 ** [application-defined SQL functions] or [virtual tables], not within
 ** top-level application code.
 **
@@ -4508,11 +4609,25 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 ** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
 ** [sqlite3_free()].
 **
-** ^(If a memory allocation error occurs during the evaluation of any
-** of these routines, a default value is returned.  The default value
-** is either the integer 0, the floating point number 0.0, or a NULL
-** pointer.  Subsequent calls to [sqlite3_errcode()] will return
-** [SQLITE_NOMEM].)^
+** As long as the input parameters are correct, these routines will only
+** fail if an out-of-memory error occurs during a format conversion.
+** Only the following subset of interfaces are subject to out-of-memory
+** errors:
+**
+** <ul>
+** <li> sqlite3_column_blob()
+** <li> sqlite3_column_text()
+** <li> sqlite3_column_text16()
+** <li> sqlite3_column_bytes()
+** <li> sqlite3_column_bytes16()
+** </ul>
+**
+** If an out-of-memory error occurs, then the return value from these
+** routines is the same as if the column had contained an SQL NULL value.
+** Valid SQL NULL returns can be distinguished from out-of-memory errors
+** by invoking the [sqlite3_errcode()] immediately after the suspect
+** return value is obtained and before any
+** other SQLite interface is called on the same [database connection].
 */
 SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
 SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
@@ -4589,11 +4704,13 @@ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 **
 ** ^These functions (collectively known as "function creation routines")
 ** are used to add SQL functions or aggregates or to redefine the behavior
-** of existing SQL functions or aggregates.  The only differences between
-** these routines are the text encoding expected for
-** the second parameter (the name of the function being created)
-** and the presence or absence of a destructor callback for
-** the application data pointer.
+** of existing SQL functions or aggregates. The only differences between
+** the three "sqlite3_create_function*" routines are the text encoding 
+** expected for the second parameter (the name of the function being 
+** created) and the presence or absence of a destructor callback for
+** the application data pointer. Function sqlite3_create_window_function()
+** is similar, but allows the user to supply the extra callback functions
+** needed by [aggregate window functions].
 **
 ** ^The first parameter is the [database connection] to which the SQL
 ** function is to be added.  ^If an application uses more than one database
@@ -4639,7 +4756,8 @@ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 ** ^(The fifth parameter is an arbitrary pointer.  The implementation of the
 ** function can gain access to this pointer using [sqlite3_user_data()].)^
 **
-** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are
+** ^The sixth, seventh and eighth parameters passed to the three
+** "sqlite3_create_function*" functions, xFunc, xStep and xFinal, are
 ** pointers to C-language functions that implement the SQL function or
 ** aggregate. ^A scalar SQL function requires an implementation of the xFunc
 ** callback only; NULL pointers must be passed as the xStep and xFinal
@@ -4648,15 +4766,24 @@ SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 ** SQL function or aggregate, pass NULL pointers for all three function
 ** callbacks.
 **
-** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL,
-** then it is destructor for the application data pointer. 
-** The destructor is invoked when the function is deleted, either by being
-** overloaded or when the database connection closes.)^
-** ^The destructor is also invoked if the call to
-** sqlite3_create_function_v2() fails.
-** ^When the destructor callback of the tenth parameter is invoked, it
-** is passed a single argument which is a copy of the application data 
-** pointer which was the fifth parameter to sqlite3_create_function_v2().
+** ^The sixth, seventh, eighth and ninth parameters (xStep, xFinal, xValue 
+** and xInverse) passed to sqlite3_create_window_function are pointers to
+** C-language callbacks that implement the new function. xStep and xFinal
+** must both be non-NULL. xValue and xInverse may either both be NULL, in
+** which case a regular aggregate function is created, or must both be 
+** non-NULL, in which case the new function may be used as either an aggregate
+** or aggregate window function. More details regarding the implementation
+** of aggregate window functions are 
+** [user-defined window functions|available here].
+**
+** ^(If the final parameter to sqlite3_create_function_v2() or
+** sqlite3_create_window_function() is not NULL, then it is destructor for
+** the application data pointer. The destructor is invoked when the function 
+** is deleted, either by being overloaded or when the database connection 
+** closes.)^ ^The destructor is also invoked if the call to 
+** sqlite3_create_function_v2() fails.  ^When the destructor callback is
+** invoked, it is passed a single argument which is a copy of the application
+** data pointer which was the fifth parameter to sqlite3_create_function_v2().
 **
 ** ^It is permitted to register multiple implementations of the same
 ** functions with the same name but with either differing numbers of
@@ -4709,6 +4836,18 @@ SQLITE_API int sqlite3_create_function_v2(
   void (*xFinal)(sqlite3_context*),
   void(*xDestroy)(void*)
 );
+SQLITE_API int sqlite3_create_window_function(
+  sqlite3 *db,
+  const char *zFunctionName,
+  int nArg,
+  int eTextRep,
+  void *pApp,
+  void (*xStep)(sqlite3_context*,int,sqlite3_value**),
+  void (*xFinal)(sqlite3_context*),
+  void (*xValue)(sqlite3_context*),
+  void (*xInverse)(sqlite3_context*,int,sqlite3_value**),
+  void(*xDestroy)(void*)
+);
 
 /*
 ** CAPI3REF: Text Encodings
@@ -4779,6 +4918,9 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
 ** datatype of the value
 ** <tr><td><b>sqlite3_value_numeric_type&nbsp;&nbsp;</b>
 ** <td>&rarr;&nbsp;&nbsp;<td>Best numeric datatype of the value
+** <tr><td><b>sqlite3_value_nochange&nbsp;&nbsp;</b>
+** <td>&rarr;&nbsp;&nbsp;<td>True if the column is unchanged in an UPDATE
+** against a virtual table.
 ** </table></blockquote>
 **
 ** <b>Details:</b>
@@ -4801,11 +4943,11 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
 ** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
 ** extract UTF-16 strings as big-endian and little-endian respectively.
 **
-** ^If [sqlite3_value] object V was initialized
+** ^If [sqlite3_value] object V was initialized 
 ** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)]
 ** and if X and Y are strings that compare equal according to strcmp(X,Y),
 ** then sqlite3_value_pointer(V,Y) will return the pointer P.  ^Otherwise,
-** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer()
+** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer() 
 ** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
 **
 ** ^(The sqlite3_value_type(V) interface returns the
@@ -4827,6 +4969,19 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
 ** then the conversion is performed.  Otherwise no conversion occurs.
 ** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
 **
+** ^Within the [xUpdate] method of a [virtual table], the
+** sqlite3_value_nochange(X) interface returns true if and only if
+** the column corresponding to X is unchanged by the UPDATE operation
+** that the xUpdate method call was invoked to implement and if
+** and the prior [xColumn] method call that was invoked to extracted
+** the value for that column returned without setting a result (probably
+** because it queried [sqlite3_vtab_nochange()] and found that the column
+** was unchanging).  ^Within an [xUpdate] method, any value for which
+** sqlite3_value_nochange(X) is true will in all other respects appear
+** to be a NULL value.  If sqlite3_value_nochange(X) is invoked anywhere other
+** than within an [xUpdate] method call for an UPDATE statement, then
+** the return value is arbitrary and meaningless.
+**
 ** Please pay particular attention to the fact that the pointer returned
 ** from [sqlite3_value_blob()], [sqlite3_value_text()], or
 ** [sqlite3_value_text16()] can be invalidated by a subsequent call to
@@ -4835,6 +4990,28 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6
 **
 ** These routines must be called from the same thread as
 ** the SQL function that supplied the [sqlite3_value*] parameters.
+**
+** As long as the input parameter is correct, these routines can only
+** fail if an out-of-memory error occurs during a format conversion.
+** Only the following subset of interfaces are subject to out-of-memory
+** errors:
+**
+** <ul>
+** <li> sqlite3_value_blob()
+** <li> sqlite3_value_text()
+** <li> sqlite3_value_text16()
+** <li> sqlite3_value_text16le()
+** <li> sqlite3_value_text16be()
+** <li> sqlite3_value_bytes()
+** <li> sqlite3_value_bytes16()
+** </ul>
+**
+** If an out-of-memory error occurs, then the return value from these
+** routines is the same as if the column had contained an SQL NULL value.
+** Valid SQL NULL returns can be distinguished from out-of-memory errors
+** by invoking the [sqlite3_errcode()] immediately after the suspect
+** return value is obtained and before any
+** other SQLite interface is called on the same [database connection].
 */
 SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
 SQLITE_API double sqlite3_value_double(sqlite3_value*);
@@ -4849,6 +5026,7 @@ SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
 SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
 SQLITE_API int sqlite3_value_type(sqlite3_value*);
 SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_nochange(sqlite3_value*);
 
 /*
 ** CAPI3REF: Finding The Subtype Of SQL Values
@@ -4987,7 +5165,7 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
 **      SQL statement)^, or
 ** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
 **       parameter)^, or
-** <li> ^(during the original sqlite3_set_auxdata() call when a memory
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory 
 **      allocation error occurs.)^ </ul>
 **
 ** Note the last bullet in particular.  The destructor X in 
@@ -5143,7 +5321,7 @@ typedef void (*sqlite3_destructor_type)(void*);
 **
 ** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an
 ** SQL NULL value, just like [sqlite3_result_null(C)], except that it
-** also associates the host-language pointer P or type T with that
+** also associates the host-language pointer P or type T with that 
 ** NULL value such that the pointer can be retrieved within an
 ** [application-defined SQL function] using [sqlite3_value_pointer()].
 ** ^If the D parameter is not NULL, then it is a pointer to a destructor
@@ -5504,6 +5682,41 @@ SQLITE_API SQLITE_EXTERN char *sqlite3_temp_directory;
 */
 SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
 
+/*
+** CAPI3REF: Win32 Specific Interface
+**
+** These interfaces are available only on Windows.  The
+** [sqlite3_win32_set_directory] interface is used to set the value associated
+** with the [sqlite3_temp_directory] or [sqlite3_data_directory] variable, to
+** zValue, depending on the value of the type parameter.  The zValue parameter
+** should be NULL to cause the previous value to be freed via [sqlite3_free];
+** a non-NULL value will be copied into memory obtained from [sqlite3_malloc]
+** prior to being used.  The [sqlite3_win32_set_directory] interface returns
+** [SQLITE_OK] to indicate success, [SQLITE_ERROR] if the type is unsupported,
+** or [SQLITE_NOMEM] if memory could not be allocated.  The value of the
+** [sqlite3_data_directory] variable is intended to act as a replacement for
+** the current directory on the sub-platforms of Win32 where that concept is
+** not present, e.g. WinRT and UWP.  The [sqlite3_win32_set_directory8] and
+** [sqlite3_win32_set_directory16] interfaces behave exactly the same as the
+** sqlite3_win32_set_directory interface except the string parameter must be
+** UTF-8 or UTF-16, respectively.
+*/
+SQLITE_API int sqlite3_win32_set_directory(
+  unsigned long type, /* Identifier for directory being set or reset */
+  void *zValue        /* New value for directory being set or reset */
+);
+SQLITE_API int sqlite3_win32_set_directory8(unsigned long type, const char *zValue);
+SQLITE_API int sqlite3_win32_set_directory16(unsigned long type, const void *zValue);
+
+/*
+** CAPI3REF: Win32 Directory Types
+**
+** These macros are only available on Windows.  They define the allowed values
+** for the type argument to the [sqlite3_win32_set_directory] interface.
+*/
+#define SQLITE_WIN32_DATA_DIRECTORY_TYPE  1
+#define SQLITE_WIN32_TEMP_DIRECTORY_TYPE  2
+
 /*
 ** CAPI3REF: Test For Auto-Commit Mode
 ** KEYWORDS: {autocommit mode}
@@ -5698,7 +5911,7 @@ SQLITE_API void *sqlite3_update_hook(
 ** and disabled if the argument is false.)^
 **
 ** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]). 
 ** In prior versions of SQLite,
 ** sharing was enabled or disabled for each thread separately.
 **
@@ -5793,7 +6006,7 @@ SQLITE_API int sqlite3_db_release_memory(sqlite3*);
 **      from the heap.
 ** </ul>)^
 **
-** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]), 
 ** the soft heap limit is enforced
 ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
 ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
@@ -5937,7 +6150,7 @@ SQLITE_API int sqlite3_table_column_metadata(
 ** prior to calling this API,
 ** otherwise an error will be returned.
 **
-** <b>Security warning:</b> It is recommended that the
+** <b>Security warning:</b> It is recommended that the 
 ** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
 ** interface.  The use of the [sqlite3_enable_load_extension()] interface
 ** should be avoided.  This will keep the SQL function [load_extension()]
@@ -6104,6 +6317,9 @@ struct sqlite3_module {
   int (*xSavepoint)(sqlite3_vtab *pVTab, int);
   int (*xRelease)(sqlite3_vtab *pVTab, int);
   int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
+  /* The methods above are in versions 1 and 2 of the sqlite_module object.
+  ** Those below are for version 3 and greater. */
+  int (*xShadowName)(const char*);
 };
 
 /*
@@ -6146,7 +6362,7 @@ struct sqlite3_module {
 ** required by SQLite. If the table has at least 64 columns and any column
 ** to the right of the first 63 is required, then bit 63 of colUsed is also
 ** set. In other words, column iCol may be required if the expression
-** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to 
 ** non-zero.
 **
 ** The [xBestIndex] method must fill aConstraintUsage[] with information
@@ -6190,14 +6406,14 @@ struct sqlite3_module {
 ** the xUpdate method are automatically rolled back by SQLite.
 **
 ** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]). 
 ** If a virtual table extension is
 ** used with an SQLite version earlier than 3.8.2, the results of attempting 
 ** to read or write the estimatedRows field are undefined (but are likely 
 ** to included crashing the application). The estimatedRows field should
 ** therefore only be used if [sqlite3_libversion_number()] returns a
 ** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for [version 3.9.0] ([dateof:3.9.0]).
+** was added for [version 3.9.0] ([dateof:3.9.0]). 
 ** It may therefore only be used if
 ** sqlite3_libversion_number() returns a value greater than or equal to
 ** 3009000.
@@ -6236,6 +6452,10 @@ struct sqlite3_index_info {
 
 /*
 ** CAPI3REF: Virtual Table Scan Flags
+**
+** Virtual table implementations are allowed to set the 
+** [sqlite3_index_info].idxFlags field to some combination of
+** these bits.
 */
 #define SQLITE_INDEX_SCAN_UNIQUE      1     /* Scan visits at most 1 row */
 
@@ -6261,6 +6481,7 @@ struct sqlite3_index_info {
 #define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70
 #define SQLITE_INDEX_CONSTRAINT_ISNULL    71
 #define SQLITE_INDEX_CONSTRAINT_IS        72
+#define SQLITE_INDEX_CONSTRAINT_FUNCTION 150
 
 /*
 ** CAPI3REF: Register A Virtual Table Implementation
@@ -6937,6 +7158,7 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 /*
 ** CAPI3REF: Low-Level Control Of Database Files
 ** METHOD: sqlite3
+** KEYWORDS: {file control}
 **
 ** ^The [sqlite3_file_control()] interface makes a direct call to the
 ** xFileControl method for the [sqlite3_io_methods] object associated
@@ -6951,11 +7173,18 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 ** the xFileControl method.  ^The return value of the xFileControl
 ** method becomes the return value of this routine.
 **
-** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
+** A few opcodes for [sqlite3_file_control()] are handled directly
+** by the SQLite core and never invoke the 
+** sqlite3_io_methods.xFileControl method.
+** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes
 ** a pointer to the underlying [sqlite3_file] object to be written into
-** the space pointed to by the 4th parameter.  ^The SQLITE_FCNTL_FILE_POINTER
-** case is a short-circuit path which does not actually invoke the
-** underlying sqlite3_io_methods.xFileControl method.
+** the space pointed to by the 4th parameter.  The
+** [SQLITE_FCNTL_JOURNAL_POINTER] works similarly except that it returns
+** the [sqlite3_file] object associated with the journal file instead of
+** the main database.  The [SQLITE_FCNTL_VFS_POINTER] opcode returns
+** a pointer to the underlying [sqlite3_vfs] object for the file.
+** The [SQLITE_FCNTL_DATA_VERSION] returns the data version counter
+** from the pager.
 **
 ** ^If the second parameter (zDbName) does not match the name of any
 ** open database file, then SQLITE_ERROR is returned.  ^This error
@@ -6965,7 +7194,7 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 ** an incorrect zDbName and an SQLITE_ERROR return from the underlying
 ** xFileControl method.
 **
-** See also: [SQLITE_FCNTL_LOCKSTATE]
+** See also: [file control opcodes]
 */
 SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
 
@@ -7011,8 +7240,9 @@ SQLITE_API int sqlite3_test_control(int op, ...);
 #define SQLITE_TESTCTRL_ALWAYS                  13
 #define SQLITE_TESTCTRL_RESERVE                 14
 #define SQLITE_TESTCTRL_OPTIMIZATIONS           15
-#define SQLITE_TESTCTRL_ISKEYWORD               16
+#define SQLITE_TESTCTRL_ISKEYWORD               16  /* NOT USED */
 #define SQLITE_TESTCTRL_SCRATCHMALLOC           17  /* NOT USED */
+#define SQLITE_TESTCTRL_INTERNAL_FUNCTIONS      17
 #define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
 #define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD    19
@@ -7022,7 +7252,191 @@ SQLITE_API int sqlite3_test_control(int op, ...);
 #define SQLITE_TESTCTRL_ISINIT                  23
 #define SQLITE_TESTCTRL_SORTER_MMAP             24
 #define SQLITE_TESTCTRL_IMPOSTER                25
-#define SQLITE_TESTCTRL_LAST                    25
+#define SQLITE_TESTCTRL_PARSER_COVERAGE         26
+#define SQLITE_TESTCTRL_LAST                    26  /* Largest TESTCTRL */
+
+/*
+** CAPI3REF: SQL Keyword Checking
+**
+** These routines provide access to the set of SQL language keywords 
+** recognized by SQLite.  Applications can uses these routines to determine
+** whether or not a specific identifier needs to be escaped (for example,
+** by enclosing in double-quotes) so as not to confuse the parser.
+**
+** The sqlite3_keyword_count() interface returns the number of distinct
+** keywords understood by SQLite.
+**
+** The sqlite3_keyword_name(N,Z,L) interface finds the N-th keyword and
+** makes *Z point to that keyword expressed as UTF8 and writes the number
+** of bytes in the keyword into *L.  The string that *Z points to is not
+** zero-terminated.  The sqlite3_keyword_name(N,Z,L) routine returns
+** SQLITE_OK if N is within bounds and SQLITE_ERROR if not. If either Z
+** or L are NULL or invalid pointers then calls to
+** sqlite3_keyword_name(N,Z,L) result in undefined behavior.
+**
+** The sqlite3_keyword_check(Z,L) interface checks to see whether or not
+** the L-byte UTF8 identifier that Z points to is a keyword, returning non-zero
+** if it is and zero if not.
+**
+** The parser used by SQLite is forgiving.  It is often possible to use
+** a keyword as an identifier as long as such use does not result in a
+** parsing ambiguity.  For example, the statement
+** "CREATE TABLE BEGIN(REPLACE,PRAGMA,END);" is accepted by SQLite, and
+** creates a new table named "BEGIN" with three columns named
+** "REPLACE", "PRAGMA", and "END".  Nevertheless, best practice is to avoid
+** using keywords as identifiers.  Common techniques used to avoid keyword
+** name collisions include:
+** <ul>
+** <li> Put all identifier names inside double-quotes.  This is the official
+**      SQL way to escape identifier names.
+** <li> Put identifier names inside &#91;...&#93;.  This is not standard SQL,
+**      but it is what SQL Server does and so lots of programmers use this
+**      technique.
+** <li> Begin every identifier with the letter "Z" as no SQL keywords start
+**      with "Z".
+** <li> Include a digit somewhere in every identifier name.
+** </ul>
+**
+** Note that the number of keywords understood by SQLite can depend on
+** compile-time options.  For example, "VACUUM" is not a keyword if
+** SQLite is compiled with the [-DSQLITE_OMIT_VACUUM] option.  Also,
+** new keywords may be added to future releases of SQLite.
+*/
+SQLITE_API int sqlite3_keyword_count(void);
+SQLITE_API int sqlite3_keyword_name(int,const char**,int*);
+SQLITE_API int sqlite3_keyword_check(const char*,int);
+
+/*
+** CAPI3REF: Dynamic String Object
+** KEYWORDS: {dynamic string}
+**
+** An instance of the sqlite3_str object contains a dynamically-sized
+** string under construction.
+**
+** The lifecycle of an sqlite3_str object is as follows:
+** <ol>
+** <li> ^The sqlite3_str object is created using [sqlite3_str_new()].
+** <li> ^Text is appended to the sqlite3_str object using various
+** methods, such as [sqlite3_str_appendf()].
+** <li> ^The sqlite3_str object is destroyed and the string it created
+** is returned using the [sqlite3_str_finish()] interface.
+** </ol>
+*/
+typedef struct sqlite3_str sqlite3_str;
+
+/*
+** CAPI3REF: Create A New Dynamic String Object
+** CONSTRUCTOR: sqlite3_str
+**
+** ^The [sqlite3_str_new(D)] interface allocates and initializes
+** a new [sqlite3_str] object.  To avoid memory leaks, the object returned by
+** [sqlite3_str_new()] must be freed by a subsequent call to 
+** [sqlite3_str_finish(X)].
+**
+** ^The [sqlite3_str_new(D)] interface always returns a pointer to a
+** valid [sqlite3_str] object, though in the event of an out-of-memory
+** error the returned object might be a special singleton that will
+** silently reject new text, always return SQLITE_NOMEM from 
+** [sqlite3_str_errcode()], always return 0 for 
+** [sqlite3_str_length()], and always return NULL from
+** [sqlite3_str_finish(X)].  It is always safe to use the value
+** returned by [sqlite3_str_new(D)] as the sqlite3_str parameter
+** to any of the other [sqlite3_str] methods.
+**
+** The D parameter to [sqlite3_str_new(D)] may be NULL.  If the
+** D parameter in [sqlite3_str_new(D)] is not NULL, then the maximum
+** length of the string contained in the [sqlite3_str] object will be
+** the value set for [sqlite3_limit](D,[SQLITE_LIMIT_LENGTH]) instead
+** of [SQLITE_MAX_LENGTH].
+*/
+SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3*);
+
+/*
+** CAPI3REF: Finalize A Dynamic String
+** DESTRUCTOR: sqlite3_str
+**
+** ^The [sqlite3_str_finish(X)] interface destroys the sqlite3_str object X
+** and returns a pointer to a memory buffer obtained from [sqlite3_malloc64()]
+** that contains the constructed string.  The calling application should
+** pass the returned value to [sqlite3_free()] to avoid a memory leak.
+** ^The [sqlite3_str_finish(X)] interface may return a NULL pointer if any
+** errors were encountered during construction of the string.  ^The
+** [sqlite3_str_finish(X)] interface will also return a NULL pointer if the
+** string in [sqlite3_str] object X is zero bytes long.
+*/
+SQLITE_API char *sqlite3_str_finish(sqlite3_str*);
+
+/*
+** CAPI3REF: Add Content To A Dynamic String
+** METHOD: sqlite3_str
+**
+** These interfaces add content to an sqlite3_str object previously obtained
+** from [sqlite3_str_new()].
+**
+** ^The [sqlite3_str_appendf(X,F,...)] and 
+** [sqlite3_str_vappendf(X,F,V)] interfaces uses the [built-in printf]
+** functionality of SQLite to append formatted text onto the end of 
+** [sqlite3_str] object X.
+**
+** ^The [sqlite3_str_append(X,S,N)] method appends exactly N bytes from string S
+** onto the end of the [sqlite3_str] object X.  N must be non-negative.
+** S must contain at least N non-zero bytes of content.  To append a
+** zero-terminated string in its entirety, use the [sqlite3_str_appendall()]
+** method instead.
+**
+** ^The [sqlite3_str_appendall(X,S)] method appends the complete content of
+** zero-terminated string S onto the end of [sqlite3_str] object X.
+**
+** ^The [sqlite3_str_appendchar(X,N,C)] method appends N copies of the
+** single-byte character C onto the end of [sqlite3_str] object X.
+** ^This method can be used, for example, to add whitespace indentation.
+**
+** ^The [sqlite3_str_reset(X)] method resets the string under construction
+** inside [sqlite3_str] object X back to zero bytes in length.  
+**
+** These methods do not return a result code.  ^If an error occurs, that fact
+** is recorded in the [sqlite3_str] object and can be recovered by a
+** subsequent call to [sqlite3_str_errcode(X)].
+*/
+SQLITE_API void sqlite3_str_appendf(sqlite3_str*, const char *zFormat, ...);
+SQLITE_API void sqlite3_str_vappendf(sqlite3_str*, const char *zFormat, va_list);
+SQLITE_API void sqlite3_str_append(sqlite3_str*, const char *zIn, int N);
+SQLITE_API void sqlite3_str_appendall(sqlite3_str*, const char *zIn);
+SQLITE_API void sqlite3_str_appendchar(sqlite3_str*, int N, char C);
+SQLITE_API void sqlite3_str_reset(sqlite3_str*);
+
+/*
+** CAPI3REF: Status Of A Dynamic String
+** METHOD: sqlite3_str
+**
+** These interfaces return the current status of an [sqlite3_str] object.
+**
+** ^If any prior errors have occurred while constructing the dynamic string
+** in sqlite3_str X, then the [sqlite3_str_errcode(X)] method will return
+** an appropriate error code.  ^The [sqlite3_str_errcode(X)] method returns
+** [SQLITE_NOMEM] following any out-of-memory error, or
+** [SQLITE_TOOBIG] if the size of the dynamic string exceeds
+** [SQLITE_MAX_LENGTH], or [SQLITE_OK] if there have been no errors.
+**
+** ^The [sqlite3_str_length(X)] method returns the current length, in bytes,
+** of the dynamic string under construction in [sqlite3_str] object X.
+** ^The length returned by [sqlite3_str_length(X)] does not include the
+** zero-termination byte.
+**
+** ^The [sqlite3_str_value(X)] method returns a pointer to the current
+** content of the dynamic string under construction in X.  The value
+** returned by [sqlite3_str_value(X)] is managed by the sqlite3_str object X
+** and might be freed or altered by any subsequent method on the same
+** [sqlite3_str] object.  Applications must not used the pointer returned
+** [sqlite3_str_value(X)] after any subsequent method call on the same
+** object.  ^Applications may change the content of the string returned
+** by [sqlite3_str_value(X)] as long as they do not write into any bytes
+** outside the range of 0 to [sqlite3_str_length(X)] and do not read or
+** write any byte after any subsequent sqlite3_str method call.
+*/
+SQLITE_API int sqlite3_str_errcode(sqlite3_str*);
+SQLITE_API int sqlite3_str_length(sqlite3_str*);
+SQLITE_API char *sqlite3_str_value(sqlite3_str*);
 
 /*
 ** CAPI3REF: SQLite Runtime Status
@@ -7106,7 +7520,7 @@ SQLITE_API int sqlite3_status64(
 ** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
 ** <dd>This parameter records the largest memory allocation request
 ** handed to [pagecache memory allocator].  Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
+** *pHighwater parameter to [sqlite3_status()] is of interest.  
 ** The value written into the *pCurrent parameter is undefined.</dd>)^
 **
 ** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt>
@@ -7119,7 +7533,7 @@ SQLITE_API int sqlite3_status64(
 ** <dd>No longer used.</dd>
 **
 ** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>The *pHighwater parameter records the deepest parser stack.
+** <dd>The *pHighwater parameter records the deepest parser stack. 
 ** The *pCurrent value is undefined.  The *pHighwater value is only
 ** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
 ** </dl>
@@ -7206,7 +7620,7 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r
 ** memory used by all pager caches associated with the database connection.)^
 ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
 **
-** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]] 
 ** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
 ** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
 ** pager cache is shared between two or more connections the bytes of heap
@@ -7257,6 +7671,15 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r
 ** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
 ** </dd>
 **
+** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(<dt>SQLITE_DBSTATUS_CACHE_SPILL</dt>
+** <dd>This parameter returns the number of dirty cache entries that have
+** been written to disk in the middle of a transaction due to the page
+** cache overflowing. Transactions are more efficient if they are written
+** to disk all at once. When pages spill mid-transaction, that introduces
+** additional overhead. This parameter can be used help identify
+** inefficiencies that can be resolve by increasing the cache size.
+** </dd>
+**
 ** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt>
 ** <dd>This parameter returns zero for the current value if and only if
 ** all foreign key constraints (deferred or immediate) have been
@@ -7276,7 +7699,8 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r
 #define SQLITE_DBSTATUS_CACHE_WRITE          9
 #define SQLITE_DBSTATUS_DEFERRED_FKS        10
 #define SQLITE_DBSTATUS_CACHE_USED_SHARED   11
-#define SQLITE_DBSTATUS_MAX                 11   /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_SPILL         12
+#define SQLITE_DBSTATUS_MAX                 12   /* Largest defined DBSTATUS */
 
 
 /*
@@ -7342,7 +7766,7 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
 **
 ** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt>
 ** <dd>^This is the number of times that the prepare statement has been
-** automatically regenerated due to schema changes or change to
+** automatically regenerated due to schema changes or change to 
 ** [bound parameters] that might affect the query plan.
 **
 ** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt>
@@ -7651,7 +8075,7 @@ typedef struct sqlite3_backup sqlite3_backup;
 ** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
 ** an error.
 **
-** ^A call to sqlite3_backup_init() will fail, returning NULL, if
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if 
 ** there is already a read or read-write transaction open on the 
 ** destination database.
 **
@@ -8231,6 +8655,7 @@ SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
 ** can use to customize and optimize their behavior.
 **
 ** <dl>
+** [[SQLITE_VTAB_CONSTRAINT_SUPPORT]]
 ** <dt>SQLITE_VTAB_CONSTRAINT_SUPPORT
 ** <dd>Calls of the form
 ** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
@@ -8276,6 +8701,40 @@ SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
 */
 SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
+/*
+** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE
+**
+** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn]
+** method of a [virtual table], then it returns true if and only if the
+** column is being fetched as part of an UPDATE operation during which the
+** column value will not change.  Applications might use this to substitute
+** a return value that is less expensive to compute and that the corresponding
+** [xUpdate] method understands as a "no-change" value.
+**
+** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that
+** the column is not changed by the UPDATE statement, then the xColumn
+** method can optionally return without setting a result, without calling
+** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces].
+** In that case, [sqlite3_value_nochange(X)] will return true for the
+** same column in the [xUpdate] method.
+*/
+SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*);
+
+/*
+** CAPI3REF: Determine The Collation For a Virtual Table Constraint
+**
+** This function may only be called from within a call to the [xBestIndex]
+** method of a [virtual table]. 
+**
+** The first argument must be the sqlite3_index_info object that is the
+** first parameter to the xBestIndex() method. The second argument must be
+** an index into the aConstraint[] array belonging to the sqlite3_index_info
+** structure passed to xBestIndex. This function returns a pointer to a buffer 
+** containing the name of the collation sequence for the corresponding
+** constraint.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int);
+
 /*
 ** CAPI3REF: Conflict resolution modes
 ** KEYWORDS: {conflict resolution mode}
@@ -8402,15 +8861,15 @@ SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
 **
 ** ^If a write-transaction is open on [database connection] D when the
 ** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
-** pages in the pager-cache that are not currently in use are written out
+** pages in the pager-cache that are not currently in use are written out 
 ** to disk. A dirty page may be in use if a database cursor created by an
 ** active SQL statement is reading from it, or if it is page 1 of a database
 ** file (page 1 is always "in use").  ^The [sqlite3_db_cacheflush(D)]
 ** interface flushes caches for all schemas - "main", "temp", and
 ** any [attached] databases.
 **
-** ^If this function needs to obtain extra database locks before dirty pages
-** can be flushed to disk, it does so. ^If those locks cannot be obtained
+** ^If this function needs to obtain extra database locks before dirty pages 
+** can be flushed to disk, it does so. ^If those locks cannot be obtained 
 ** immediately and there is a busy-handler callback configured, it is invoked
 ** in the usual manner. ^If the required lock still cannot be obtained, then
 ** the database is skipped and an attempt made to flush any dirty pages
@@ -8457,16 +8916,16 @@ SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
 ** kind of update operation that is about to occur.
 ** ^(The fourth parameter to the preupdate callback is the name of the
 ** database within the database connection that is being modified.  This
-** will be "main" for the main database or "temp" for TEMP tables or
+** will be "main" for the main database or "temp" for TEMP tables or 
 ** the name given after the AS keyword in the [ATTACH] statement for attached
 ** databases.)^
 ** ^The fifth parameter to the preupdate callback is the name of the
 ** table that is being modified.
 **
 ** For an UPDATE or DELETE operation on a [rowid table], the sixth
-** parameter passed to the preupdate callback is the initial [rowid] of the
+** parameter passed to the preupdate callback is the initial [rowid] of the 
 ** row being modified or deleted. For an INSERT operation on a rowid table,
-** or any operation on a WITHOUT ROWID table, the value of the sixth
+** or any operation on a WITHOUT ROWID table, the value of the sixth 
 ** parameter is undefined. For an INSERT or UPDATE on a rowid table the
 ** seventh parameter is the final rowid value of the row being inserted
 ** or updated. The value of the seventh parameter passed to the callback
@@ -8505,7 +8964,7 @@ SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
 **
 ** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
 ** callback was invoked as a result of a direct insert, update, or delete
-** operation; or 1 for inserts, updates, or deletes invoked by top-level
+** operation; or 1 for inserts, updates, or deletes invoked by top-level 
 ** triggers; or 2 for changes resulting from triggers called by top-level
 ** triggers; and so forth.
 **
@@ -8539,14 +8998,13 @@ SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
 ** The return value is OS-dependent.  For example, on unix systems, after
 ** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
 ** called to get back the underlying "errno" that caused the problem, such
-** as ENOSPC, EAUTH, EISDIR, and so forth.
+** as ENOSPC, EAUTH, EISDIR, and so forth.  
 */
 SQLITE_API int sqlite3_system_errno(sqlite3*);
 
 /*
 ** CAPI3REF: Database Snapshot
 ** KEYWORDS: {snapshot} {sqlite3_snapshot}
-** EXPERIMENTAL
 **
 ** An instance of the snapshot object records the state of a [WAL mode]
 ** database for some specific point in history.
@@ -8563,11 +9021,6 @@ SQLITE_API int sqlite3_system_errno(sqlite3*);
 ** version of the database file so that it is possible to later open a new read
 ** transaction that sees that historical version of the database rather than
 ** the most recent version.
-**
-** The constructor for this object is [sqlite3_snapshot_get()].  The
-** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
-** to an historical snapshot (if possible).  The destructor for
-** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
 */
 typedef struct sqlite3_snapshot {
   unsigned char hidden[48];
@@ -8575,7 +9028,7 @@ typedef struct sqlite3_snapshot {
 
 /*
 ** CAPI3REF: Record A Database Snapshot
-** EXPERIMENTAL
+** CONSTRUCTOR: sqlite3_snapshot
 **
 ** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
 ** new [sqlite3_snapshot] object that records the current state of
@@ -8583,15 +9036,15 @@ typedef struct sqlite3_snapshot {
 ** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
 ** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
 ** If there is not already a read-transaction open on schema S when
-** this function is called, one is opened automatically.
+** this function is called, one is opened automatically. 
 **
 ** The following must be true for this function to succeed. If any of
 ** the following statements are false when sqlite3_snapshot_get() is
 ** called, SQLITE_ERROR is returned. The final value of *P is undefined
-** in this case.
+** in this case. 
 **
 ** <ul>
-**   <li> The database handle must be in [autocommit mode].
+**   <li> The database handle must not be in [autocommit mode].
 **
 **   <li> Schema S of [database connection] D must be a [WAL mode] database.
 **
@@ -8600,13 +9053,13 @@ typedef struct sqlite3_snapshot {
 **
 **   <li> One or more transactions must have been written to the current wal
 **        file since it was created on disk (by any connection). This means
-**        that a snapshot cannot be taken on a wal mode database with no wal
+**        that a snapshot cannot be taken on a wal mode database with no wal 
 **        file immediately after it is first opened. At least one transaction
 **        must be written to it first.
 ** </ul>
 **
 ** This function may also return SQLITE_NOMEM.  If it is called with the
-** database handle in autocommit mode but fails for some other reason,
+** database handle in autocommit mode but fails for some other reason, 
 ** whether or not a read transaction is opened on schema S is undefined.
 **
 ** The [sqlite3_snapshot] object returned from a successful call to
@@ -8614,7 +9067,7 @@ typedef struct sqlite3_snapshot {
 ** to avoid a memory leak.
 **
 ** The [sqlite3_snapshot_get()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used.
 */
 SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
   sqlite3 *db,
@@ -8624,35 +9077,46 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
 
 /*
 ** CAPI3REF: Start a read transaction on an historical snapshot
-** EXPERIMENTAL
+** METHOD: sqlite3_snapshot
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface either starts a new read 
+** transaction or upgrades an existing one for schema S of 
+** [database connection] D such that the read transaction refers to 
+** historical [snapshot] P, rather than the most recent change to the 
+** database. ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK 
+** on success or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, the database connection must not be in 
+** [autocommit mode] when [sqlite3_snapshot_open(D,S,P)] is called. If there
+** is already a read transaction open on schema S, then the database handle
+** must have no active statements (SELECT statements that have been passed
+** to sqlite3_step() but not sqlite3_reset() or sqlite3_finalize()). 
+** SQLITE_ERROR is returned if either of these conditions is violated, or
+** if schema S does not exist, or if the snapshot object is invalid.
+**
+** ^A call to sqlite3_snapshot_open() will fail to open if the specified
+** snapshot has been overwritten by a [checkpoint]. In this case 
+** SQLITE_ERROR_SNAPSHOT is returned.
+**
+** If there is already a read transaction open when this function is 
+** invoked, then the same read transaction remains open (on the same
+** database snapshot) if SQLITE_ERROR, SQLITE_BUSY or SQLITE_ERROR_SNAPSHOT
+** is returned. If another error code - for example SQLITE_PROTOCOL or an
+** SQLITE_IOERR error code - is returned, then the final state of the
+** read transaction is undefined. If SQLITE_OK is returned, then the 
+** read transaction is now open on database snapshot P.
 **
-** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
-** read transaction for schema S of
-** [database connection] D such that the read transaction
-** refers to historical [snapshot] P, rather than the most
-** recent change to the database.
-** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
-** or an appropriate [error code] if it fails.
-**
-** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
-** the first operation following the [BEGIN] that takes the schema S
-** out of [autocommit mode].
-** ^In other words, schema S must not currently be in
-** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
-** database connection D must be out of [autocommit mode].
-** ^A [snapshot] will fail to open if it has been overwritten by a
-** [checkpoint].
 ** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
 ** database connection D does not know that the database file for
 ** schema S is in [WAL mode].  A database connection might not know
 ** that the database file is in [WAL mode] if there has been no prior
-** I/O on that database connection, or if the database entered [WAL mode]
+** I/O on that database connection, or if the database entered [WAL mode] 
 ** after the most recent I/O on the database connection.)^
 ** (Hint: Run "[PRAGMA application_id]" against a newly opened
 ** database connection in order to make it ready to use snapshots.)
 **
 ** The [sqlite3_snapshot_open()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used.
 */
 SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
   sqlite3 *db,
@@ -8662,38 +9126,41 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
 
 /*
 ** CAPI3REF: Destroy a snapshot
-** EXPERIMENTAL
+** DESTRUCTOR: sqlite3_snapshot
 **
 ** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
 ** The application must eventually free every [sqlite3_snapshot] object
 ** using this routine to avoid a memory leak.
 **
 ** The [sqlite3_snapshot_free()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used.
 */
 SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
 
 /*
 ** CAPI3REF: Compare the ages of two snapshot handles.
-** EXPERIMENTAL
+** METHOD: sqlite3_snapshot
 **
 ** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
-** of two valid snapshot handles.
+** of two valid snapshot handles. 
 **
-** If the two snapshot handles are not associated with the same database
-** file, the result of the comparison is undefined.
+** If the two snapshot handles are not associated with the same database 
+** file, the result of the comparison is undefined. 
 **
 ** Additionally, the result of the comparison is only valid if both of the
 ** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
 ** last time the wal file was deleted. The wal file is deleted when the
 ** database is changed back to rollback mode or when the number of database
-** clients drops to zero. If either snapshot handle was obtained before the
-** wal file was last deleted, the value returned by this function
+** clients drops to zero. If either snapshot handle was obtained before the 
+** wal file was last deleted, the value returned by this function 
 ** is undefined.
 **
 ** Otherwise, this API returns a negative value if P1 refers to an older
 ** snapshot than P2, zero if the two handles refer to the same database
 ** snapshot, and a positive value if P1 is a newer snapshot than P2.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_SNAPSHOT] option.
 */
 SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
   sqlite3_snapshot *p1,
@@ -8702,26 +9169,151 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
 
 /*
 ** CAPI3REF: Recover snapshots from a wal file
-** EXPERIMENTAL
+** METHOD: sqlite3_snapshot
 **
-** If all connections disconnect from a database file but do not perform
-** a checkpoint, the existing wal file is opened along with the database
-** file the next time the database is opened. At this point it is only
-** possible to successfully call sqlite3_snapshot_open() to open the most
-** recent snapshot of the database (the one at the head of the wal file),
-** even though the wal file may contain other valid snapshots for which
-** clients have sqlite3_snapshot handles.
+** If a [WAL file] remains on disk after all database connections close
+** (either through the use of the [SQLITE_FCNTL_PERSIST_WAL] [file control]
+** or because the last process to have the database opened exited without
+** calling [sqlite3_close()]) and a new connection is subsequently opened
+** on that database and [WAL file], the [sqlite3_snapshot_open()] interface
+** will only be able to open the last transaction added to the WAL file
+** even though the WAL file contains other valid transactions.
 **
-** This function attempts to scan the wal file associated with database zDb
+** This function attempts to scan the WAL file associated with database zDb
 ** of database handle db and make all valid snapshots available to
 ** sqlite3_snapshot_open(). It is an error if there is already a read
-** transaction open on the database, or if the database is not a wal mode
+** transaction open on the database, or if the database is not a WAL mode
 ** database.
 **
 ** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_SNAPSHOT] option.
 */
 SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);
 
+/*
+** CAPI3REF: Serialize a database
+**
+** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory
+** that is a serialization of the S database on [database connection] D.
+** If P is not a NULL pointer, then the size of the database in bytes
+** is written into *P.
+**
+** For an ordinary on-disk database file, the serialization is just a
+** copy of the disk file.  For an in-memory database or a "TEMP" database,
+** the serialization is the same sequence of bytes which would be written
+** to disk if that database where backed up to disk.
+**
+** The usual case is that sqlite3_serialize() copies the serialization of
+** the database into memory obtained from [sqlite3_malloc64()] and returns
+** a pointer to that memory.  The caller is responsible for freeing the
+** returned value to avoid a memory leak.  However, if the F argument
+** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations
+** are made, and the sqlite3_serialize() function will return a pointer
+** to the contiguous memory representation of the database that SQLite
+** is currently using for that database, or NULL if the no such contiguous
+** memory representation of the database exists.  A contiguous memory
+** representation of the database will usually only exist if there has
+** been a prior call to [sqlite3_deserialize(D,S,...)] with the same
+** values of D and S.
+** The size of the database is written into *P even if the 
+** SQLITE_SERIALIZE_NOCOPY bit is set but no contiguous copy
+** of the database exists.
+**
+** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the
+** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory
+** allocation error occurs.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_DESERIALIZE] option.
+*/
+SQLITE_API unsigned char *sqlite3_serialize(
+  sqlite3 *db,           /* The database connection */
+  const char *zSchema,   /* Which DB to serialize. ex: "main", "temp", ... */
+  sqlite3_int64 *piSize, /* Write size of the DB here, if not NULL */
+  unsigned int mFlags    /* Zero or more SQLITE_SERIALIZE_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3_serialize
+**
+** Zero or more of the following constants can be OR-ed together for
+** the F argument to [sqlite3_serialize(D,S,P,F)].
+**
+** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return
+** a pointer to contiguous in-memory database that it is currently using,
+** without making a copy of the database.  If SQLite is not currently using
+** a contiguous in-memory database, then this option causes
+** [sqlite3_serialize()] to return a NULL pointer.  SQLite will only be
+** using a contiguous in-memory database if it has been initialized by a
+** prior call to [sqlite3_deserialize()].
+*/
+#define SQLITE_SERIALIZE_NOCOPY 0x001   /* Do no memory allocations */
+
+/*
+** CAPI3REF: Deserialize a database
+**
+** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the 
+** [database connection] D to disconnect from database S and then
+** reopen S as an in-memory database based on the serialization contained
+** in P.  The serialized database P is N bytes in size.  M is the size of
+** the buffer P, which might be larger than N.  If M is larger than N, and
+** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is
+** permitted to add content to the in-memory database as long as the total
+** size does not exceed M bytes.
+**
+** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will
+** invoke sqlite3_free() on the serialization buffer when the database
+** connection closes.  If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then
+** SQLite will try to increase the buffer size using sqlite3_realloc64()
+** if writes on the database cause it to grow larger than M bytes.
+**
+** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the
+** database is currently in a read transaction or is involved in a backup
+** operation.
+**
+** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the 
+** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then
+** [sqlite3_free()] is invoked on argument P prior to returning.
+**
+** This interface is only available if SQLite is compiled with the
+** [SQLITE_ENABLE_DESERIALIZE] option.
+*/
+SQLITE_API int sqlite3_deserialize(
+  sqlite3 *db,            /* The database connection */
+  const char *zSchema,    /* Which DB to reopen with the deserialization */
+  unsigned char *pData,   /* The serialized database content */
+  sqlite3_int64 szDb,     /* Number bytes in the deserialization */
+  sqlite3_int64 szBuf,    /* Total size of buffer pData[] */
+  unsigned mFlags         /* Zero or more SQLITE_DESERIALIZE_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3_deserialize()
+**
+** The following are allowed values for 6th argument (the F argument) to
+** the [sqlite3_deserialize(D,S,P,N,M,F)] interface.
+**
+** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization
+** in the P argument is held in memory obtained from [sqlite3_malloc64()]
+** and that SQLite should take ownership of this memory and automatically
+** free it when it has finished using it.  Without this flag, the caller
+** is responsible for freeing any dynamically allocated memory.
+**
+** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to
+** grow the size of the database using calls to [sqlite3_realloc64()].  This
+** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used.
+** Without this flag, the deserialized database cannot increase in size beyond
+** the number of bytes specified by the M parameter.
+**
+** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database
+** should be treated as read-only.
+*/
+#define SQLITE_DESERIALIZE_FREEONCLOSE 1 /* Call sqlite3_free() on close */
+#define SQLITE_DESERIALIZE_RESIZEABLE  2 /* Resize using sqlite3_realloc64() */
+#define SQLITE_DESERIALIZE_READONLY    4 /* Database is read-only */
+
 /*
 ** Undo the hack that converts floating point types to integer for
 ** builds on processors without floating point support.
@@ -8833,7 +9425,7 @@ struct sqlite3_rtree_query_info {
   sqlite3_int64 iRowid;             /* Rowid for current entry */
   sqlite3_rtree_dbl rParentScore;   /* Score of parent node */
   int eParentWithin;                /* Visibility of parent node */
-  int eWithin;                      /* OUT: Visiblity */
+  int eWithin;                      /* OUT: Visibility */
   sqlite3_rtree_dbl rScore;         /* OUT: Write the score here */
   /* The following fields are only available in 3.8.11 and later */
   sqlite3_value **apSqlParam;       /* Original SQL values of parameters */
@@ -8869,16 +9461,23 @@ extern "C" {
 
 /*
 ** CAPI3REF: Session Object Handle
+**
+** An instance of this object is a [session] that can be used to
+** record changes to a database.
 */
 typedef struct sqlite3_session sqlite3_session;
 
 /*
 ** CAPI3REF: Changeset Iterator Handle
+**
+** An instance of this object acts as a cursor for iterating
+** over the elements of a [changeset] or [patchset].
 */
 typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
 
 /*
 ** CAPI3REF: Create A New Session Object
+** CONSTRUCTOR: sqlite3_session
 **
 ** Create a new session object attached to database handle db. If successful,
 ** a pointer to the new object is written to *ppSession and SQLITE_OK is
@@ -8899,7 +9498,7 @@ typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
 ** is not possible for an application to register a pre-update hook on a
 ** database handle that has one or more session objects attached. Nor is
 ** it possible to create a session object attached to a database handle for
-** which a pre-update hook is already defined. The results of attempting
+** which a pre-update hook is already defined. The results of attempting 
 ** either of these things are undefined.
 **
 ** The session object will be used to create changesets for tables in
@@ -8915,14 +9514,15 @@ SQLITE_API int sqlite3session_create(
 
 /*
 ** CAPI3REF: Delete A Session Object
+** DESTRUCTOR: sqlite3_session
 **
-** Delete a session object previously allocated using
+** Delete a session object previously allocated using 
 ** [sqlite3session_create()]. Once a session object has been deleted, the
 ** results of attempting to use pSession with any other session module
 ** function are undefined.
 **
 ** Session objects must be deleted before the database handle to which they
-** are attached is closed. Refer to the documentation for
+** are attached is closed. Refer to the documentation for 
 ** [sqlite3session_create()] for details.
 */
 SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
@@ -8930,6 +9530,7 @@ SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
 
 /*
 ** CAPI3REF: Enable Or Disable A Session Object
+** METHOD: sqlite3_session
 **
 ** Enable or disable the recording of changes by a session object. When
 ** enabled, a session object records changes made to the database. When
@@ -8939,16 +9540,17 @@ SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
 ** the eventual changesets.
 **
 ** Passing zero to this function disables the session. Passing a value
-** greater than zero enables it. Passing a value less than zero is a
+** greater than zero enables it. Passing a value less than zero is a 
 ** no-op, and may be used to query the current state of the session.
 **
-** The return value indicates the final state of the session object: 0 if
+** The return value indicates the final state of the session object: 0 if 
 ** the session is disabled, or 1 if it is enabled.
 */
 SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
 
 /*
 ** CAPI3REF: Set Or Clear the Indirect Change Flag
+** METHOD: sqlite3_session
 **
 ** Each change recorded by a session object is marked as either direct or
 ** indirect. A change is marked as indirect if either:
@@ -8956,7 +9558,7 @@ SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
 ** <ul>
 **   <li> The session object "indirect" flag is set when the change is
 **        made, or
-**   <li> The change is made by an SQL trigger or foreign key action
+**   <li> The change is made by an SQL trigger or foreign key action 
 **        instead of directly as a result of a users SQL statement.
 ** </ul>
 **
@@ -8968,32 +9570,33 @@ SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
 ** flag.  If the second argument passed to this function is zero, then the
 ** indirect flag is cleared. If it is greater than zero, the indirect flag
 ** is set. Passing a value less than zero does not modify the current value
-** of the indirect flag, and may be used to query the current state of the
+** of the indirect flag, and may be used to query the current state of the 
 ** indirect flag for the specified session object.
 **
-** The return value indicates the final state of the indirect flag: 0 if
+** The return value indicates the final state of the indirect flag: 0 if 
 ** it is clear, or 1 if it is set.
 */
 SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
 
 /*
 ** CAPI3REF: Attach A Table To A Session Object
+** METHOD: sqlite3_session
 **
 ** If argument zTab is not NULL, then it is the name of a table to attach
-** to the session object passed as the first argument. All subsequent changes
-** made to the table while the session object is enabled will be recorded. See
+** to the session object passed as the first argument. All subsequent changes 
+** made to the table while the session object is enabled will be recorded. See 
 ** documentation for [sqlite3session_changeset()] for further details.
 **
 ** Or, if argument zTab is NULL, then changes are recorded for all tables
-** in the database. If additional tables are added to the database (by
-** executing "CREATE TABLE" statements) after this call is made, changes for
+** in the database. If additional tables are added to the database (by 
+** executing "CREATE TABLE" statements) after this call is made, changes for 
 ** the new tables are also recorded.
 **
 ** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
-** defined as part of their CREATE TABLE statement. It does not matter if the
+** defined as part of their CREATE TABLE statement. It does not matter if the 
 ** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
 ** KEY may consist of a single column, or may be a composite key.
-**
+** 
 ** It is not an error if the named table does not exist in the database. Nor
 ** is it an error if the named table does not have a PRIMARY KEY. However,
 ** no changes will be recorded in either of these scenarios.
@@ -9001,8 +9604,37 @@ SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect)
 ** Changes are not recorded for individual rows that have NULL values stored
 ** in one or more of their PRIMARY KEY columns.
 **
-** SQLITE_OK is returned if the call completes without error. Or, if an error
+** SQLITE_OK is returned if the call completes without error. Or, if an error 
 ** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+**
+** <h3>Special sqlite_stat1 Handling</h3>
+**
+** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to 
+** some of the rules above. In SQLite, the schema of sqlite_stat1 is:
+**  <pre>
+**  &nbsp;     CREATE TABLE sqlite_stat1(tbl,idx,stat)  
+**  </pre>
+**
+** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are 
+** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes 
+** are recorded for rows for which (idx IS NULL) is true. However, for such
+** rows a zero-length blob (SQL value X'') is stored in the changeset or
+** patchset instead of a NULL value. This allows such changesets to be
+** manipulated by legacy implementations of sqlite3changeset_invert(),
+** concat() and similar.
+**
+** The sqlite3changeset_apply() function automatically converts the 
+** zero-length blob back to a NULL value when updating the sqlite_stat1
+** table. However, if the application calls sqlite3changeset_new(),
+** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset 
+** iterator directly (including on a changeset iterator passed to a
+** conflict-handler callback) then the X'' value is returned. The application
+** must translate X'' to NULL itself if required.
+**
+** Legacy (older than 3.22.0) versions of the sessions module cannot capture
+** changes made to the sqlite_stat1 table. Legacy versions of the
+** sqlite3changeset_apply() function silently ignore any modifications to the
+** sqlite_stat1 table that are part of a changeset or patchset.
 */
 SQLITE_API int sqlite3session_attach(
   sqlite3_session *pSession,      /* Session object */
@@ -9011,11 +9643,12 @@ SQLITE_API int sqlite3session_attach(
 
 /*
 ** CAPI3REF: Set a table filter on a Session Object.
+** METHOD: sqlite3_session
 **
-** The second argument (xFilter) is the "filter callback". For changes to rows
+** The second argument (xFilter) is the "filter callback". For changes to rows 
 ** in tables that are not attached to the Session object, the filter is called
-** to determine whether changes to the table's rows should be tracked or not.
-** If xFilter returns 0, changes is not tracked. Note that once a table is
+** to determine whether changes to the table's rows should be tracked or not. 
+** If xFilter returns 0, changes is not tracked. Note that once a table is 
 ** attached, xFilter will not be called again.
 */
 SQLITE_API void sqlite3session_table_filter(
@@ -9029,10 +9662,11 @@ SQLITE_API void sqlite3session_table_filter(
 
 /*
 ** CAPI3REF: Generate A Changeset From A Session Object
+** METHOD: sqlite3_session
 **
-** Obtain a changeset containing changes to the tables attached to the
-** session object passed as the first argument. If successful,
-** set *ppChangeset to point to a buffer containing the changeset
+** Obtain a changeset containing changes to the tables attached to the 
+** session object passed as the first argument. If successful, 
+** set *ppChangeset to point to a buffer containing the changeset 
 ** and *pnChangeset to the size of the changeset in bytes before returning
 ** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
 ** zero and return an SQLite error code.
@@ -9047,7 +9681,7 @@ SQLITE_API void sqlite3session_table_filter(
 ** modifies the values of primary key columns. If such a change is made, it
 ** is represented in a changeset as a DELETE followed by an INSERT.
 **
-** Changes are not recorded for rows that have NULL values stored in one or
+** Changes are not recorded for rows that have NULL values stored in one or 
 ** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
 ** no corresponding change is present in the changesets returned by this
 ** function. If an existing row with one or more NULL values stored in
@@ -9100,14 +9734,14 @@ SQLITE_API void sqlite3session_table_filter(
 ** <ul>
 **   <li> For each record generated by an insert, the database is queried
 **        for a row with a matching primary key. If one is found, an INSERT
-**        change is added to the changeset. If no such row is found, no change
+**        change is added to the changeset. If no such row is found, no change 
 **        is added to the changeset.
 **
-**   <li> For each record generated by an update or delete, the database is
+**   <li> For each record generated by an update or delete, the database is 
 **        queried for a row with a matching primary key. If such a row is
 **        found and one or more of the non-primary key fields have been
-**        modified from their original values, an UPDATE change is added to
-**        the changeset. Or, if no such row is found in the table, a DELETE
+**        modified from their original values, an UPDATE change is added to 
+**        the changeset. Or, if no such row is found in the table, a DELETE 
 **        change is added to the changeset. If there is a row with a matching
 **        primary key in the database, but all fields contain their original
 **        values, no change is added to the changeset.
@@ -9115,7 +9749,7 @@ SQLITE_API void sqlite3session_table_filter(
 **
 ** This means, amongst other things, that if a row is inserted and then later
 ** deleted while a session object is active, neither the insert nor the delete
-** will be present in the changeset. Or if a row is deleted and then later a
+** will be present in the changeset. Or if a row is deleted and then later a 
 ** row with the same primary key values inserted while a session object is
 ** active, the resulting changeset will contain an UPDATE change instead of
 ** a DELETE and an INSERT.
@@ -9124,10 +9758,10 @@ SQLITE_API void sqlite3session_table_filter(
 ** it does not accumulate records when rows are inserted, updated or deleted.
 ** This may appear to have some counter-intuitive effects if a single row
 ** is written to more than once during a session. For example, if a row
-** is inserted while a session object is enabled, then later deleted while
+** is inserted while a session object is enabled, then later deleted while 
 ** the same session object is disabled, no INSERT record will appear in the
 ** changeset, even though the delete took place while the session was disabled.
-** Or, if one field of a row is updated while a session is disabled, and
+** Or, if one field of a row is updated while a session is disabled, and 
 ** another field of the same row is updated while the session is enabled, the
 ** resulting changeset will contain an UPDATE change that updates both fields.
 */
@@ -9139,6 +9773,7 @@ SQLITE_API int sqlite3session_changeset(
 
 /*
 ** CAPI3REF: Load The Difference Between Tables Into A Session
+** METHOD: sqlite3_session
 **
 ** If it is not already attached to the session object passed as the first
 ** argument, this function attaches table zTbl in the same manner as the
@@ -9147,7 +9782,7 @@ SQLITE_API int sqlite3session_changeset(
 ** an error).
 **
 ** Argument zFromDb must be the name of a database ("main", "temp" etc.)
-** attached to the same database handle as the session object that contains
+** attached to the same database handle as the session object that contains 
 ** a table compatible with the table attached to the session by this function.
 ** A table is considered compatible if it:
 **
@@ -9163,25 +9798,25 @@ SQLITE_API int sqlite3session_changeset(
 ** APIs, tables without PRIMARY KEYs are simply ignored.
 **
 ** This function adds a set of changes to the session object that could be
-** used to update the table in database zFrom (call this the "from-table")
-** so that its content is the same as the table attached to the session
+** used to update the table in database zFrom (call this the "from-table") 
+** so that its content is the same as the table attached to the session 
 ** object (call this the "to-table"). Specifically:
 **
 ** <ul>
-**   <li> For each row (primary key) that exists in the to-table but not in
+**   <li> For each row (primary key) that exists in the to-table but not in 
 **     the from-table, an INSERT record is added to the session object.
 **
-**   <li> For each row (primary key) that exists in the to-table but not in
+**   <li> For each row (primary key) that exists in the to-table but not in 
 **     the from-table, a DELETE record is added to the session object.
 **
-**   <li> For each row (primary key) that exists in both tables, but features
+**   <li> For each row (primary key) that exists in both tables, but features 
 **     different non-PK values in each, an UPDATE record is added to the
-**     session.
+**     session.  
 ** </ul>
 **
 ** To clarify, if this function is called and then a changeset constructed
-** using [sqlite3session_changeset()], then after applying that changeset to
-** database zFrom the contents of the two compatible tables would be
+** using [sqlite3session_changeset()], then after applying that changeset to 
+** database zFrom the contents of the two compatible tables would be 
 ** identical.
 **
 ** It an error if database zFrom does not exist or does not contain the
@@ -9189,7 +9824,7 @@ SQLITE_API int sqlite3session_changeset(
 **
 ** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
 ** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
-** may be set to point to a buffer containing an English language error
+** may be set to point to a buffer containing an English language error 
 ** message. It is the responsibility of the caller to free this buffer using
 ** sqlite3_free().
 */
@@ -9203,23 +9838,24 @@ SQLITE_API int sqlite3session_diff(
 
 /*
 ** CAPI3REF: Generate A Patchset From A Session Object
+** METHOD: sqlite3_session
 **
 ** The differences between a patchset and a changeset are that:
 **
 ** <ul>
-**   <li> DELETE records consist of the primary key fields only. The
+**   <li> DELETE records consist of the primary key fields only. The 
 **        original values of other fields are omitted.
-**   <li> The original values of any modified fields are omitted from
+**   <li> The original values of any modified fields are omitted from 
 **        UPDATE records.
 ** </ul>
 **
-** A patchset blob may be used with up to date versions of all
-** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
+** A patchset blob may be used with up to date versions of all 
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(), 
 ** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
 ** attempting to use a patchset blob with old versions of the
-** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error. 
 **
-** Because the non-primary key "old.*" fields are omitted, no
+** Because the non-primary key "old.*" fields are omitted, no 
 ** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
 ** is passed to the sqlite3changeset_apply() API. Other conflict types work
 ** in the same way as for changesets.
@@ -9238,29 +9874,30 @@ SQLITE_API int sqlite3session_patchset(
 /*
 ** CAPI3REF: Test if a changeset has recorded any changes.
 **
-** Return non-zero if no changes to attached tables have been recorded by
-** the session object passed as the first argument. Otherwise, if one or
+** Return non-zero if no changes to attached tables have been recorded by 
+** the session object passed as the first argument. Otherwise, if one or 
 ** more changes have been recorded, return zero.
 **
 ** Even if this function returns zero, it is possible that calling
 ** [sqlite3session_changeset()] on the session handle may still return a
-** changeset that contains no changes. This can happen when a row in
-** an attached table is modified and then later on the original values
+** changeset that contains no changes. This can happen when a row in 
+** an attached table is modified and then later on the original values 
 ** are restored. However, if this function returns non-zero, then it is
-** guaranteed that a call to sqlite3session_changeset() will return a
+** guaranteed that a call to sqlite3session_changeset() will return a 
 ** changeset containing zero changes.
 */
 SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
 
 /*
-** CAPI3REF: Create An Iterator To Traverse A Changeset
+** CAPI3REF: Create An Iterator To Traverse A Changeset 
+** CONSTRUCTOR: sqlite3_changeset_iter
 **
 ** Create an iterator used to iterate through the contents of a changeset.
 ** If successful, *pp is set to point to the iterator handle and SQLITE_OK
 ** is returned. Otherwise, if an error occurs, *pp is set to zero and an
 ** SQLite error code is returned.
 **
-** The following functions can be used to advance and query a changeset
+** The following functions can be used to advance and query a changeset 
 ** iterator created by this function:
 **
 ** <ul>
@@ -9277,23 +9914,50 @@ SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
 **
 ** Assuming the changeset blob was created by one of the
 ** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
-** [sqlite3changeset_invert()] functions, all changes within the changeset
-** that apply to a single table are grouped together. This means that when
-** an application iterates through a changeset using an iterator created by
-** this function, all changes that relate to a single table are visited
-** consecutively. There is no chance that the iterator will visit a change
-** the applies to table X, then one for table Y, and then later on visit
+** [sqlite3changeset_invert()] functions, all changes within the changeset 
+** that apply to a single table are grouped together. This means that when 
+** an application iterates through a changeset using an iterator created by 
+** this function, all changes that relate to a single table are visited 
+** consecutively. There is no chance that the iterator will visit a change 
+** the applies to table X, then one for table Y, and then later on visit 
 ** another change for table X.
+**
+** The behavior of sqlite3changeset_start_v2() and its streaming equivalent
+** may be modified by passing a combination of
+** [SQLITE_CHANGESETSTART_INVERT | supported flags] as the 4th parameter.
+**
+** Note that the sqlite3changeset_start_v2() API is still <b>experimental</b>
+** and therefore subject to change.
 */
 SQLITE_API int sqlite3changeset_start(
   sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
   int nChangeset,                 /* Size of changeset blob in bytes */
   void *pChangeset                /* Pointer to blob containing changeset */
 );
+SQLITE_API int sqlite3changeset_start_v2(
+  sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
+  int nChangeset,                 /* Size of changeset blob in bytes */
+  void *pChangeset,               /* Pointer to blob containing changeset */
+  int flags                       /* SESSION_CHANGESETSTART_* flags */
+);
+
+/*
+** CAPI3REF: Flags for sqlite3changeset_start_v2
+**
+** The following flags may passed via the 4th parameter to
+** [sqlite3changeset_start_v2] and [sqlite3changeset_start_v2_strm]:
+**
+** <dt>SQLITE_CHANGESETAPPLY_INVERT <dd>
+**   Invert the changeset while iterating through it. This is equivalent to
+**   inverting a changeset using sqlite3changeset_invert() before applying it.
+**   It is an error to specify this flag with a patchset.
+*/
+#define SQLITE_CHANGESETSTART_INVERT        0x0002
 
 
 /*
 ** CAPI3REF: Advance A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
 **
 ** This function may only be used with iterators created by function
 ** [sqlite3changeset_start()]. If it is called on an iterator passed to
@@ -9306,18 +9970,19 @@ SQLITE_API int sqlite3changeset_start(
 ** point to the first change in the changeset. Each subsequent call advances
 ** the iterator to point to the next change in the changeset (if any). If
 ** no error occurs and the iterator points to a valid change after a call
-** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned. 
 ** Otherwise, if all changes in the changeset have already been visited,
 ** SQLITE_DONE is returned.
 **
-** If an error occurs, an SQLite error code is returned. Possible error
-** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
+** If an error occurs, an SQLite error code is returned. Possible error 
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or 
 ** SQLITE_NOMEM.
 */
 SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
 
 /*
 ** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
 **
 ** The pIter argument passed to this function may either be an iterator
 ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
@@ -9328,14 +9993,14 @@ SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
 ** If argument pzTab is not NULL, then *pzTab is set to point to a
 ** nul-terminated utf-8 encoded string containing the name of the table
 ** affected by the current change. The buffer remains valid until either
-** sqlite3changeset_next() is called on the iterator or until the
-** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
+** sqlite3changeset_next() is called on the iterator or until the 
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is 
 ** set to the number of columns in the table affected by the change. If
 ** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
 ** is an indirect change, or false (0) otherwise. See the documentation for
 ** [sqlite3session_indirect()] for a description of direct and indirect
-** changes. Finally, if pOp is not NULL, then *pOp is set to one of
-** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of 
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the 
 ** type of change that the iterator currently points to.
 **
 ** If no error occurs, SQLITE_OK is returned. If an error does occur, an
@@ -9352,6 +10017,7 @@ SQLITE_API int sqlite3changeset_op(
 
 /*
 ** CAPI3REF: Obtain The Primary Key Definition Of A Table
+** METHOD: sqlite3_changeset_iter
 **
 ** For each modified table, a changeset includes the following:
 **
@@ -9383,11 +10049,12 @@ SQLITE_API int sqlite3changeset_pk(
 
 /*
 ** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
 **
 ** The pIter argument passed to this function may either be an iterator
 ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
 ** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW. 
 ** Furthermore, it may only be called if the type of change that the iterator
 ** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
 ** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
@@ -9397,9 +10064,9 @@ SQLITE_API int sqlite3changeset_pk(
 ** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
 **
 ** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the vector of
+** sqlite3_value object containing the iVal'th value from the vector of 
 ** original row values stored as part of the UPDATE or DELETE change and
-** returns SQLITE_OK. The name of the function comes from the fact that this
+** returns SQLITE_OK. The name of the function comes from the fact that this 
 ** is similar to the "old.*" columns available to update or delete triggers.
 **
 ** If some other error occurs (e.g. an OOM condition), an SQLite error code
@@ -9413,11 +10080,12 @@ SQLITE_API int sqlite3changeset_old(
 
 /*
 ** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
 **
 ** The pIter argument passed to this function may either be an iterator
 ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
 ** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW. 
 ** Furthermore, it may only be called if the type of change that the iterator
 ** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
 ** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
@@ -9427,12 +10095,12 @@ SQLITE_API int sqlite3changeset_old(
 ** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
 **
 ** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the vector of
+** sqlite3_value object containing the iVal'th value from the vector of 
 ** new row values stored as part of the UPDATE or INSERT change and
 ** returns SQLITE_OK. If the change is an UPDATE and does not include
-** a new value for the requested column, *ppValue is set to NULL and
-** SQLITE_OK returned. The name of the function comes from the fact that
-** this is similar to the "new.*" columns available to update or delete
+** a new value for the requested column, *ppValue is set to NULL and 
+** SQLITE_OK returned. The name of the function comes from the fact that 
+** this is similar to the "new.*" columns available to update or delete 
 ** triggers.
 **
 ** If some other error occurs (e.g. an OOM condition), an SQLite error code
@@ -9446,6 +10114,7 @@ SQLITE_API int sqlite3changeset_new(
 
 /*
 ** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
 **
 ** This function should only be used with iterator objects passed to a
 ** conflict-handler callback by [sqlite3changeset_apply()] with either
@@ -9458,7 +10127,7 @@ SQLITE_API int sqlite3changeset_new(
 ** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
 **
 ** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the
+** sqlite3_value object containing the iVal'th value from the 
 ** "conflicting row" associated with the current conflict-handler callback
 ** and returns SQLITE_OK.
 **
@@ -9473,6 +10142,7 @@ SQLITE_API int sqlite3changeset_conflict(
 
 /*
 ** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+** METHOD: sqlite3_changeset_iter
 **
 ** This function may only be called with an iterator passed to an
 ** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
@@ -9489,6 +10159,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts(
 
 /*
 ** CAPI3REF: Finalize A Changeset Iterator
+** METHOD: sqlite3_changeset_iter
 **
 ** This function is used to finalize an iterator allocated with
 ** [sqlite3changeset_start()].
@@ -9500,19 +10171,21 @@ SQLITE_API int sqlite3changeset_fk_conflicts(
 ** call has no effect.
 **
 ** If an error was encountered within a call to an sqlite3changeset_xxx()
-** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an 
 ** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
 ** to that error is returned by this function. Otherwise, SQLITE_OK is
 ** returned. This is to allow the following pattern (pseudo-code):
 **
+** <pre>
 **   sqlite3changeset_start();
 **   while( SQLITE_ROW==sqlite3changeset_next() ){
 **     // Do something with change.
 **   }
 **   rc = sqlite3changeset_finalize();
 **   if( rc!=SQLITE_OK ){
-**     // An error has occurred
+**     // An error has occurred 
 **   }
+** </pre>
 */
 SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
 
@@ -9538,7 +10211,7 @@ SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
 ** zeroed and an SQLite error code returned.
 **
 ** It is the responsibility of the caller to eventually call sqlite3_free()
-** on the *ppOut pointer to free the buffer allocation following a successful
+** on the *ppOut pointer to free the buffer allocation following a successful 
 ** call to this function.
 **
 ** WARNING/TODO: This function currently assumes that the input is a valid
@@ -9552,14 +10225,15 @@ SQLITE_API int sqlite3changeset_invert(
 /*
 ** CAPI3REF: Concatenate Two Changeset Objects
 **
-** This function is used to concatenate two changesets, A and B, into a
+** This function is used to concatenate two changesets, A and B, into a 
 ** single changeset. The result is a changeset equivalent to applying
-** changeset A followed by changeset B.
+** changeset A followed by changeset B. 
 **
-** This function combines the two input changesets using an
+** This function combines the two input changesets using an 
 ** sqlite3_changegroup object. Calling it produces similar results as the
 ** following code fragment:
 **
+** <pre>
 **   sqlite3_changegroup *pGrp;
 **   rc = sqlite3_changegroup_new(&pGrp);
 **   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
@@ -9570,6 +10244,7 @@ SQLITE_API int sqlite3changeset_invert(
 **     *ppOut = 0;
 **     *pnOut = 0;
 **   }
+** </pre>
 **
 ** Refer to the sqlite3_changegroup documentation below for details.
 */
@@ -9585,11 +10260,15 @@ SQLITE_API int sqlite3changeset_concat(
 
 /*
 ** CAPI3REF: Changegroup Handle
+**
+** A changegroup is an object used to combine two or more 
+** [changesets] or [patchsets]
 */
 typedef struct sqlite3_changegroup sqlite3_changegroup;
 
 /*
 ** CAPI3REF: Create A New Changegroup Object
+** CONSTRUCTOR: sqlite3_changegroup
 **
 ** An sqlite3_changegroup object is used to combine two or more changesets
 ** (or patchsets) into a single changeset (or patchset). A single changegroup
@@ -9598,7 +10277,7 @@ typedef struct sqlite3_changegroup sqlite3_changegroup;
 **
 ** If successful, this function returns SQLITE_OK and populates (*pp) with
 ** a pointer to a new sqlite3_changegroup object before returning. The caller
-** should eventually free the returned object using a call to
+** should eventually free the returned object using a call to 
 ** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
 ** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
 **
@@ -9610,7 +10289,7 @@ typedef struct sqlite3_changegroup sqlite3_changegroup;
 **   <li> Zero or more changesets (or patchsets) are added to the object
 **        by calling sqlite3changegroup_add().
 **
-**   <li> The result of combining all input changesets together is obtained
+**   <li> The result of combining all input changesets together is obtained 
 **        by the application via a call to sqlite3changegroup_output().
 **
 **   <li> The object is deleted using a call to sqlite3changegroup_delete().
@@ -9619,7 +10298,7 @@ typedef struct sqlite3_changegroup sqlite3_changegroup;
 ** Any number of calls to add() and output() may be made between the calls to
 ** new() and delete(), and in any order.
 **
-** As well as the regular sqlite3changegroup_add() and
+** As well as the regular sqlite3changegroup_add() and 
 ** sqlite3changegroup_output() functions, also available are the streaming
 ** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
 */
@@ -9627,9 +10306,10 @@ SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
 
 /*
 ** CAPI3REF: Add A Changeset To A Changegroup
+** METHOD: sqlite3_changegroup
 **
 ** Add all changes within the changeset (or patchset) in buffer pData (size
-** nData bytes) to the changegroup.
+** nData bytes) to the changegroup. 
 **
 ** If the buffer contains a patchset, then all prior calls to this function
 ** on the same changegroup object must also have specified patchsets. Or, if
@@ -9656,7 +10336,7 @@ SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
 **       changeset was recorded immediately after the changesets already
 **       added to the changegroup.
 **   <tr><td>INSERT <td>UPDATE <td>
-**       The INSERT change remains in the changegroup. The values in the
+**       The INSERT change remains in the changegroup. The values in the 
 **       INSERT change are modified as if the row was inserted by the
 **       existing change and then updated according to the new change.
 **   <tr><td>INSERT <td>DELETE <td>
@@ -9667,17 +10347,17 @@ SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
 **       changeset was recorded immediately after the changesets already
 **       added to the changegroup.
 **   <tr><td>UPDATE <td>UPDATE <td>
-**       The existing UPDATE remains within the changegroup. It is amended
-**       so that the accompanying values are as if the row was updated once
+**       The existing UPDATE remains within the changegroup. It is amended 
+**       so that the accompanying values are as if the row was updated once 
 **       by the existing change and then again by the new change.
 **   <tr><td>UPDATE <td>DELETE <td>
 **       The existing UPDATE is replaced by the new DELETE within the
 **       changegroup.
 **   <tr><td>DELETE <td>INSERT <td>
 **       If one or more of the column values in the row inserted by the
-**       new change differ from those in the row deleted by the existing
+**       new change differ from those in the row deleted by the existing 
 **       change, the existing DELETE is replaced by an UPDATE within the
-**       changegroup. Otherwise, if the inserted row is exactly the same
+**       changegroup. Otherwise, if the inserted row is exactly the same 
 **       as the deleted row, the existing DELETE is simply discarded.
 **   <tr><td>DELETE <td>UPDATE <td>
 **       The new change is ignored. This case does not occur if the new
@@ -9704,6 +10384,7 @@ SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pDa
 
 /*
 ** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+** METHOD: sqlite3_changegroup
 **
 ** Obtain a buffer containing a changeset (or patchset) representing the
 ** current contents of the changegroup. If the inputs to the changegroup
@@ -9721,7 +10402,7 @@ SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pDa
 **
 ** If an error occurs, an SQLite error code is returned and the output
 ** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
-** is returned and the output variables are set to the size of and a
+** is returned and the output variables are set to the size of and a 
 ** pointer to the output buffer, respectively. In this case it is the
 ** responsibility of the caller to eventually free the buffer using a
 ** call to sqlite3_free().
@@ -9734,36 +10415,36 @@ SQLITE_API int sqlite3changegroup_output(
 
 /*
 ** CAPI3REF: Delete A Changegroup Object
+** DESTRUCTOR: sqlite3_changegroup
 */
 SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
 
 /*
 ** CAPI3REF: Apply A Changeset To A Database
 **
-** Apply a changeset to a database. This function attempts to update the
-** "main" database attached to handle db with the changes found in the
-** changeset passed via the second and third arguments.
+** Apply a changeset or patchset to a database. These functions attempt to
+** update the "main" database attached to handle db with the changes found in
+** the changeset passed via the second and third arguments. 
 **
-** The fourth argument (xFilter) passed to this function is the "filter
+** The fourth argument (xFilter) passed to these functions is the "filter
 ** callback". If it is not NULL, then for each table affected by at least one
 ** change in the changeset, the filter callback is invoked with
 ** the table name as the second argument, and a copy of the context pointer
-** passed as the sixth argument to this function as the first. If the "filter
-** callback" returns zero, then no attempt is made to apply any changes to
-** the table. Otherwise, if the return value is non-zero or the xFilter
-** argument to this function is NULL, all changes related to the table are
-** attempted.
-**
-** For each table that is not excluded by the filter callback, this function
-** tests that the target database contains a compatible table. A table is
+** passed as the sixth argument as the first. If the "filter callback"
+** returns zero, then no attempt is made to apply any changes to the table.
+** Otherwise, if the return value is non-zero or the xFilter argument to
+** is NULL, all changes related to the table are attempted.
+**
+** For each table that is not excluded by the filter callback, this function 
+** tests that the target database contains a compatible table. A table is 
 ** considered compatible if all of the following are true:
 **
 ** <ul>
-**   <li> The table has the same name as the name recorded in the
+**   <li> The table has the same name as the name recorded in the 
 **        changeset, and
-**   <li> The table has at least as many columns as recorded in the
+**   <li> The table has at least as many columns as recorded in the 
 **        changeset, and
-**   <li> The table has primary key columns in the same position as
+**   <li> The table has primary key columns in the same position as 
 **        recorded in the changeset.
 ** </ul>
 **
@@ -9772,11 +10453,11 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
 ** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
 ** one such warning is issued for each table in the changeset.
 **
-** For each change for which there is a compatible table, an attempt is made
-** to modify the table contents according to the UPDATE, INSERT or DELETE
-** change. If a change cannot be applied cleanly, the conflict handler
-** function passed as the fifth argument to sqlite3changeset_apply() may be
-** invoked. A description of exactly when the conflict handler is invoked for
+** For each change for which there is a compatible table, an attempt is made 
+** to modify the table contents according to the UPDATE, INSERT or DELETE 
+** change. If a change cannot be applied cleanly, the conflict handler 
+** function passed as the fifth argument to sqlite3changeset_apply() may be 
+** invoked. A description of exactly when the conflict handler is invoked for 
 ** each type of change is below.
 **
 ** Unlike the xFilter argument, xConflict may not be passed NULL. The results
@@ -9784,23 +10465,23 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
 ** argument are undefined.
 **
 ** Each time the conflict handler function is invoked, it must return one
-** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or 
 ** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
 ** if the second argument passed to the conflict handler is either
 ** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
 ** returns an illegal value, any changes already made are rolled back and
-** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different 
 ** actions are taken by sqlite3changeset_apply() depending on the value
 ** returned by each invocation of the conflict-handler function. Refer to
-** the documentation for the three
+** the documentation for the three 
 ** [SQLITE_CHANGESET_OMIT|available return values] for details.
 **
 ** <dl>
 ** <dt>DELETE Changes<dd>
-**   For each DELETE change, this function checks if the target database
-**   contains a row with the same primary key value (or values) as the
-**   original row values stored in the changeset. If it does, and the values
-**   stored in all non-primary key columns also match the values stored in
+**   For each DELETE change, the function checks if the target database 
+**   contains a row with the same primary key value (or values) as the 
+**   original row values stored in the changeset. If it does, and the values 
+**   stored in all non-primary key columns also match the values stored in 
 **   the changeset the row is deleted from the target database.
 **
 **   If a row with matching primary key values is found, but one or more of
@@ -9829,22 +10510,22 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
 **   database table, the trailing fields are populated with their default
 **   values.
 **
-**   If the attempt to insert the row fails because the database already
+**   If the attempt to insert the row fails because the database already 
 **   contains a row with the same primary key values, the conflict handler
-**   function is invoked with the second argument set to
+**   function is invoked with the second argument set to 
 **   [SQLITE_CHANGESET_CONFLICT].
 **
 **   If the attempt to insert the row fails because of some other constraint
-**   violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
+**   violation (e.g. NOT NULL or UNIQUE), the conflict handler function is 
 **   invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
-**   This includes the case where the INSERT operation is re-attempted because
-**   an earlier call to the conflict handler function returned
+**   This includes the case where the INSERT operation is re-attempted because 
+**   an earlier call to the conflict handler function returned 
 **   [SQLITE_CHANGESET_REPLACE].
 **
 ** <dt>UPDATE Changes<dd>
-**   For each UPDATE change, this function checks if the target database
-**   contains a row with the same primary key value (or values) as the
-**   original row values stored in the changeset. If it does, and the values
+**   For each UPDATE change, the function checks if the target database 
+**   contains a row with the same primary key value (or values) as the 
+**   original row values stored in the changeset. If it does, and the values 
 **   stored in all modified non-primary key columns also match the values
 **   stored in the changeset the row is updated within the target database.
 **
@@ -9860,12 +10541,12 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
 **   the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
 **   passed as the second argument.
 **
-**   If the UPDATE operation is attempted, but SQLite returns
-**   SQLITE_CONSTRAINT, the conflict-handler function is invoked with
+**   If the UPDATE operation is attempted, but SQLite returns 
+**   SQLITE_CONSTRAINT, the conflict-handler function is invoked with 
 **   [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
-**   This includes the case where the UPDATE operation is attempted after
+**   This includes the case where the UPDATE operation is attempted after 
 **   an earlier call to the conflict handler function returned
-**   [SQLITE_CHANGESET_REPLACE].
+**   [SQLITE_CHANGESET_REPLACE].  
 ** </dl>
 **
 ** It is safe to execute SQL statements, including those that write to the
@@ -9873,11 +10554,28 @@ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
 ** This can be used to further customize the applications conflict
 ** resolution strategy.
 **
-** All changes made by this function are enclosed in a savepoint transaction.
+** All changes made by these functions are enclosed in a savepoint transaction.
 ** If any other error (aside from a constraint failure when attempting to
 ** write to the target database) occurs, then the savepoint transaction is
-** rolled back, restoring the target database to its original state, and an
+** rolled back, restoring the target database to its original state, and an 
 ** SQLite error code returned.
+**
+** If the output parameters (ppRebase) and (pnRebase) are non-NULL and
+** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2()
+** may set (*ppRebase) to point to a "rebase" that may be used with the 
+** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase)
+** is set to the size of the buffer in bytes. It is the responsibility of the
+** caller to eventually free any such buffer using sqlite3_free(). The buffer
+** is only allocated and populated if one or more conflicts were encountered
+** while applying the patchset. See comments surrounding the sqlite3_rebaser
+** APIs for further details.
+**
+** The behavior of sqlite3changeset_apply_v2() and its streaming equivalent
+** may be modified by passing a combination of
+** [SQLITE_CHANGESETAPPLY_NOSAVEPOINT | supported flags] as the 9th parameter.
+**
+** Note that the sqlite3changeset_apply_v2() API is still <b>experimental</b>
+** and therefore subject to change.
 */
 SQLITE_API int sqlite3changeset_apply(
   sqlite3 *db,                    /* Apply change to "main" db of this handle */
@@ -9894,8 +10592,49 @@ SQLITE_API int sqlite3changeset_apply(
   ),
   void *pCtx                      /* First argument passed to xConflict */
 );
+SQLITE_API int sqlite3changeset_apply_v2(
+  sqlite3 *db,                    /* Apply change to "main" db of this handle */
+  int nChangeset,                 /* Size of changeset in bytes */
+  void *pChangeset,               /* Changeset blob */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    const char *zTab              /* Table name */
+  ),
+  int(*xConflict)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
+    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
+  ),
+  void *pCtx,                     /* First argument passed to xConflict */
+  void **ppRebase, int *pnRebase, /* OUT: Rebase data */
+  int flags                       /* SESSION_CHANGESETAPPLY_* flags */
+);
 
 /*
+** CAPI3REF: Flags for sqlite3changeset_apply_v2
+**
+** The following flags may passed via the 9th parameter to
+** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]:
+**
+** <dl>
+** <dt>SQLITE_CHANGESETAPPLY_NOSAVEPOINT <dd>
+**   Usually, the sessions module encloses all operations performed by
+**   a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The
+**   SAVEPOINT is committed if the changeset or patchset is successfully
+**   applied, or rolled back if an error occurs. Specifying this flag
+**   causes the sessions module to omit this savepoint. In this case, if the
+**   caller has an open transaction or savepoint when apply_v2() is called, 
+**   it may revert the partially applied changeset by rolling it back.
+**
+** <dt>SQLITE_CHANGESETAPPLY_INVERT <dd>
+**   Invert the changeset before applying it. This is equivalent to inverting
+**   a changeset using sqlite3changeset_invert() before applying it. It is
+**   an error to specify this flag with a patchset.
+*/
+#define SQLITE_CHANGESETAPPLY_NOSAVEPOINT   0x0001
+#define SQLITE_CHANGESETAPPLY_INVERT        0x0002
+
+/* 
 ** CAPI3REF: Constants Passed To The Conflict Handler
 **
 ** Values that may be passed as the second argument to a conflict-handler.
@@ -9904,32 +10643,32 @@ SQLITE_API int sqlite3changeset_apply(
 ** <dt>SQLITE_CHANGESET_DATA<dd>
 **   The conflict handler is invoked with CHANGESET_DATA as the second argument
 **   when processing a DELETE or UPDATE change if a row with the required
-**   PRIMARY KEY fields is present in the database, but one or more other
-**   (non primary-key) fields modified by the update do not contain the
+**   PRIMARY KEY fields is present in the database, but one or more other 
+**   (non primary-key) fields modified by the update do not contain the 
 **   expected "before" values.
-**
+** 
 **   The conflicting row, in this case, is the database row with the matching
 **   primary key.
-**
+** 
 ** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
 **   The conflict handler is invoked with CHANGESET_NOTFOUND as the second
 **   argument when processing a DELETE or UPDATE change if a row with the
 **   required PRIMARY KEY fields is not present in the database.
-**
+** 
 **   There is no conflicting row in this case. The results of invoking the
 **   sqlite3changeset_conflict() API are undefined.
-**
+** 
 ** <dt>SQLITE_CHANGESET_CONFLICT<dd>
 **   CHANGESET_CONFLICT is passed as the second argument to the conflict
-**   handler while processing an INSERT change if the operation would result
+**   handler while processing an INSERT change if the operation would result 
 **   in duplicate primary key values.
-**
+** 
 **   The conflicting row in this case is the database row with the matching
 **   primary key.
 **
 ** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
 **   If foreign key handling is enabled, and applying a changeset leaves the
-**   database in a state containing foreign key violations, the conflict
+**   database in a state containing foreign key violations, the conflict 
 **   handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
 **   exactly once before the changeset is committed. If the conflict handler
 **   returns CHANGESET_OMIT, the changes, including those that caused the
@@ -9939,12 +10678,12 @@ SQLITE_API int sqlite3changeset_apply(
 **   No current or conflicting row information is provided. The only function
 **   it is possible to call on the supplied sqlite3_changeset_iter handle
 **   is sqlite3changeset_fk_conflicts().
-**
+** 
 ** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
-**   If any other constraint violation occurs while applying a change (i.e.
-**   a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
+**   If any other constraint violation occurs while applying a change (i.e. 
+**   a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is 
 **   invoked with CHANGESET_CONSTRAINT as the second argument.
-**
+** 
 **   There is no conflicting row in this case. The results of invoking the
 **   sqlite3changeset_conflict() API are undefined.
 **
@@ -9956,7 +10695,7 @@ SQLITE_API int sqlite3changeset_apply(
 #define SQLITE_CHANGESET_CONSTRAINT  4
 #define SQLITE_CHANGESET_FOREIGN_KEY 5
 
-/*
+/* 
 ** CAPI3REF: Constants Returned By The Conflict Handler
 **
 ** A conflict handler callback must return one of the following three values.
@@ -9964,13 +10703,13 @@ SQLITE_API int sqlite3changeset_apply(
 ** <dl>
 ** <dt>SQLITE_CHANGESET_OMIT<dd>
 **   If a conflict handler returns this value no special action is taken. The
-**   change that caused the conflict is not applied. The session module
+**   change that caused the conflict is not applied. The session module 
 **   continues to the next change in the changeset.
 **
 ** <dt>SQLITE_CHANGESET_REPLACE<dd>
 **   This value may only be returned if the second argument to the conflict
 **   handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
-**   is not the case, any changes applied so far are rolled back and the
+**   is not the case, any changes applied so far are rolled back and the 
 **   call to sqlite3changeset_apply() returns SQLITE_MISUSE.
 **
 **   If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
@@ -9983,7 +10722,7 @@ SQLITE_API int sqlite3changeset_apply(
 **   the original row is restored to the database before continuing.
 **
 ** <dt>SQLITE_CHANGESET_ABORT<dd>
-**   If this value is returned, any changes applied so far are rolled back
+**   If this value is returned, any changes applied so far are rolled back 
 **   and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
 ** </dl>
 */
@@ -9991,27 +10730,183 @@ SQLITE_API int sqlite3changeset_apply(
 #define SQLITE_CHANGESET_REPLACE    1
 #define SQLITE_CHANGESET_ABORT      2
 
+/* 
+** CAPI3REF: Rebasing changesets
+** EXPERIMENTAL
+**
+** Suppose there is a site hosting a database in state S0. And that
+** modifications are made that move that database to state S1 and a
+** changeset recorded (the "local" changeset). Then, a changeset based
+** on S0 is received from another site (the "remote" changeset) and 
+** applied to the database. The database is then in state 
+** (S1+"remote"), where the exact state depends on any conflict
+** resolution decisions (OMIT or REPLACE) made while applying "remote".
+** Rebasing a changeset is to update it to take those conflict 
+** resolution decisions into account, so that the same conflicts
+** do not have to be resolved elsewhere in the network. 
+**
+** For example, if both the local and remote changesets contain an
+** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)":
+**
+**   local:  INSERT INTO t1 VALUES(1, 'v1');
+**   remote: INSERT INTO t1 VALUES(1, 'v2');
+**
+** and the conflict resolution is REPLACE, then the INSERT change is
+** removed from the local changeset (it was overridden). Or, if the
+** conflict resolution was "OMIT", then the local changeset is modified
+** to instead contain:
+**
+**           UPDATE t1 SET b = 'v2' WHERE a=1;
+**
+** Changes within the local changeset are rebased as follows:
+**
+** <dl>
+** <dt>Local INSERT<dd>
+**   This may only conflict with a remote INSERT. If the conflict 
+**   resolution was OMIT, then add an UPDATE change to the rebased
+**   changeset. Or, if the conflict resolution was REPLACE, add
+**   nothing to the rebased changeset.
+**
+** <dt>Local DELETE<dd>
+**   This may conflict with a remote UPDATE or DELETE. In both cases the
+**   only possible resolution is OMIT. If the remote operation was a
+**   DELETE, then add no change to the rebased changeset. If the remote
+**   operation was an UPDATE, then the old.* fields of change are updated
+**   to reflect the new.* values in the UPDATE.
+**
+** <dt>Local UPDATE<dd>
+**   This may conflict with a remote UPDATE or DELETE. If it conflicts
+**   with a DELETE, and the conflict resolution was OMIT, then the update
+**   is changed into an INSERT. Any undefined values in the new.* record
+**   from the update change are filled in using the old.* values from
+**   the conflicting DELETE. Or, if the conflict resolution was REPLACE,
+**   the UPDATE change is simply omitted from the rebased changeset.
+**
+**   If conflict is with a remote UPDATE and the resolution is OMIT, then
+**   the old.* values are rebased using the new.* values in the remote
+**   change. Or, if the resolution is REPLACE, then the change is copied
+**   into the rebased changeset with updates to columns also updated by
+**   the conflicting remote UPDATE removed. If this means no columns would 
+**   be updated, the change is omitted.
+** </dl>
+**
+** A local change may be rebased against multiple remote changes 
+** simultaneously. If a single key is modified by multiple remote 
+** changesets, they are combined as follows before the local changeset
+** is rebased:
+**
+** <ul>
+**    <li> If there has been one or more REPLACE resolutions on a
+**         key, it is rebased according to a REPLACE.
+**
+**    <li> If there have been no REPLACE resolutions on a key, then
+**         the local changeset is rebased according to the most recent
+**         of the OMIT resolutions.
+** </ul>
+**
+** Note that conflict resolutions from multiple remote changesets are 
+** combined on a per-field basis, not per-row. This means that in the 
+** case of multiple remote UPDATE operations, some fields of a single 
+** local change may be rebased for REPLACE while others are rebased for 
+** OMIT.
+**
+** In order to rebase a local changeset, the remote changeset must first
+** be applied to the local database using sqlite3changeset_apply_v2() and
+** the buffer of rebase information captured. Then:
+**
+** <ol>
+**   <li> An sqlite3_rebaser object is created by calling 
+**        sqlite3rebaser_create().
+**   <li> The new object is configured with the rebase buffer obtained from
+**        sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure().
+**        If the local changeset is to be rebased against multiple remote
+**        changesets, then sqlite3rebaser_configure() should be called
+**        multiple times, in the same order that the multiple
+**        sqlite3changeset_apply_v2() calls were made.
+**   <li> Each local changeset is rebased by calling sqlite3rebaser_rebase().
+**   <li> The sqlite3_rebaser object is deleted by calling
+**        sqlite3rebaser_delete().
+** </ol>
+*/
+typedef struct sqlite3_rebaser sqlite3_rebaser;
+
+/*
+** CAPI3REF: Create a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Allocate a new changeset rebaser object. If successful, set (*ppNew) to
+** point to the new object and return SQLITE_OK. Otherwise, if an error
+** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew) 
+** to NULL. 
+*/
+SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew);
+
+/*
+** CAPI3REF: Configure a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Configure the changeset rebaser object to rebase changesets according
+** to the conflict resolutions described by buffer pRebase (size nRebase
+** bytes), which must have been obtained from a previous call to
+** sqlite3changeset_apply_v2().
+*/
+SQLITE_API int sqlite3rebaser_configure(
+  sqlite3_rebaser*, 
+  int nRebase, const void *pRebase
+); 
+
+/*
+** CAPI3REF: Rebase a changeset
+** EXPERIMENTAL
+**
+** Argument pIn must point to a buffer containing a changeset nIn bytes
+** in size. This function allocates and populates a buffer with a copy
+** of the changeset rebased rebased according to the configuration of the
+** rebaser object passed as the first argument. If successful, (*ppOut)
+** is set to point to the new buffer containing the rebased changset and 
+** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the
+** responsibility of the caller to eventually free the new buffer using
+** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut)
+** are set to zero and an SQLite error code returned.
+*/
+SQLITE_API int sqlite3rebaser_rebase(
+  sqlite3_rebaser*,
+  int nIn, const void *pIn, 
+  int *pnOut, void **ppOut 
+);
+
+/*
+** CAPI3REF: Delete a changeset rebaser object.
+** EXPERIMENTAL
+**
+** Delete the changeset rebaser object and all associated resources. There
+** should be one call to this function for each successful invocation
+** of sqlite3rebaser_create().
+*/
+SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p); 
+
 /*
 ** CAPI3REF: Streaming Versions of API functions.
 **
-** The six streaming API xxx_strm() functions serve similar purposes to the
+** The six streaming API xxx_strm() functions serve similar purposes to the 
 ** corresponding non-streaming API functions:
 **
 ** <table border=1 style="margin-left:8ex;margin-right:8ex">
 **   <tr><th>Streaming function<th>Non-streaming equivalent</th>
-**   <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply]
-**   <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat]
-**   <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert]
-**   <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start]
-**   <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset]
-**   <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset]
+**   <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply] 
+**   <tr><td>sqlite3changeset_apply_strm_v2<td>[sqlite3changeset_apply_v2] 
+**   <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat] 
+**   <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert] 
+**   <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start] 
+**   <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset] 
+**   <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset] 
 ** </table>
 **
 ** Non-streaming functions that accept changesets (or patchsets) as input
-** require that the entire changeset be stored in a single buffer in memory.
-** Similarly, those that return a changeset or patchset do so by returning
-** a pointer to a single large buffer allocated using sqlite3_malloc().
-** Normally this is convenient. However, if an application running in a
+** require that the entire changeset be stored in a single buffer in memory. 
+** Similarly, those that return a changeset or patchset do so by returning 
+** a pointer to a single large buffer allocated using sqlite3_malloc(). 
+** Normally this is convenient. However, if an application running in a 
 ** low-memory environment is required to handle very large changesets, the
 ** large contiguous memory allocations required can become onerous.
 **
@@ -10033,12 +10928,12 @@ SQLITE_API int sqlite3changeset_apply(
 **  </pre>
 **
 ** Each time the xInput callback is invoked by the sessions module, the first
-** argument passed is a copy of the supplied pIn context pointer. The second
-** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
-** error occurs the xInput method should copy up to (*pnData) bytes of data
-** into the buffer and set (*pnData) to the actual number of bytes copied
-** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
-** should be set to zero to indicate this. Or, if an error occurs, an SQLite
+** argument passed is a copy of the supplied pIn context pointer. The second 
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no 
+** error occurs the xInput method should copy up to (*pnData) bytes of data 
+** into the buffer and set (*pnData) to the actual number of bytes copied 
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData) 
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite 
 ** error code should be returned. In all cases, if an xInput callback returns
 ** an error, all processing is abandoned and the streaming API function
 ** returns a copy of the error code to the caller.
@@ -10046,7 +10941,7 @@ SQLITE_API int sqlite3changeset_apply(
 ** In the case of sqlite3changeset_start_strm(), the xInput callback may be
 ** invoked by the sessions module at any point during the lifetime of the
 ** iterator. If such an xInput callback returns an error, the iterator enters
-** an error state, whereby all subsequent calls to iterator functions
+** an error state, whereby all subsequent calls to iterator functions 
 ** immediately fail with the same error code as returned by xInput.
 **
 ** Similarly, streaming API functions that return changesets (or patchsets)
@@ -10076,7 +10971,7 @@ SQLITE_API int sqlite3changeset_apply(
 ** is immediately abandoned and the streaming API function returns a copy
 ** of the xOutput error code to the application.
 **
-** The sessions module never invokes an xOutput callback with the third
+** The sessions module never invokes an xOutput callback with the third 
 ** parameter set to a value less than or equal to zero. Other than this,
 ** no guarantees are made as to the size of the chunks of data returned.
 */
@@ -10095,6 +10990,23 @@ SQLITE_API int sqlite3changeset_apply_strm(
   ),
   void *pCtx                      /* First argument passed to xConflict */
 );
+SQLITE_API int sqlite3changeset_apply_v2_strm(
+  sqlite3 *db,                    /* Apply change to "main" db of this handle */
+  int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+  void *pIn,                                          /* First arg for xInput */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    const char *zTab              /* Table name */
+  ),
+  int(*xConflict)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
+    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
+  ),
+  void *pCtx,                     /* First argument passed to xConflict */
+  void **ppRebase, int *pnRebase,
+  int flags
+);
 SQLITE_API int sqlite3changeset_concat_strm(
   int (*xInputA)(void *pIn, void *pData, int *pnData),
   void *pInA,
@@ -10114,6 +11026,12 @@ SQLITE_API int sqlite3changeset_start_strm(
   int (*xInput)(void *pIn, void *pData, int *pnData),
   void *pIn
 );
+SQLITE_API int sqlite3changeset_start_v2_strm(
+  sqlite3_changeset_iter **pp,
+  int (*xInput)(void *pIn, void *pData, int *pnData),
+  void *pIn,
+  int flags
+);
 SQLITE_API int sqlite3session_changeset_strm(
   sqlite3_session *pSession,
   int (*xOutput)(void *pOut, const void *pData, int nData),
@@ -10124,15 +11042,61 @@ SQLITE_API int sqlite3session_patchset_strm(
   int (*xOutput)(void *pOut, const void *pData, int nData),
   void *pOut
 );
-SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*,
+SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*, 
     int (*xInput)(void *pIn, void *pData, int *pnData),
     void *pIn
 );
 SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*,
-    int (*xOutput)(void *pOut, const void *pData, int nData),
+    int (*xOutput)(void *pOut, const void *pData, int nData), 
     void *pOut
 );
+SQLITE_API int sqlite3rebaser_rebase_strm(
+  sqlite3_rebaser *pRebaser,
+  int (*xInput)(void *pIn, void *pData, int *pnData),
+  void *pIn,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+
+/*
+** CAPI3REF: Configure global parameters
+**
+** The sqlite3session_config() interface is used to make global configuration
+** changes to the sessions module in order to tune it to the specific needs 
+** of the application.
+**
+** The sqlite3session_config() interface is not threadsafe. If it is invoked
+** while any other thread is inside any other sessions method then the
+** results are undefined. Furthermore, if it is invoked after any sessions
+** related objects have been created, the results are also undefined. 
+**
+** The first argument to the sqlite3session_config() function must be one
+** of the SQLITE_SESSION_CONFIG_XXX constants defined below. The 
+** interpretation of the (void*) value passed as the second parameter and
+** the effect of calling this function depends on the value of the first
+** parameter.
+**
+** <dl>
+** <dt>SQLITE_SESSION_CONFIG_STRMSIZE<dd>
+**    By default, the sessions module streaming interfaces attempt to input
+**    and output data in approximately 1 KiB chunks. This operand may be used
+**    to set and query the value of this configuration setting. The pointer
+**    passed as the second argument must point to a value of type (int).
+**    If this value is greater than 0, it is used as the new streaming data
+**    chunk size for both input and output. Before returning, the (int) value
+**    pointed to by pArg is set to the final value of the streaming interface
+**    chunk size.
+** </dl>
+**
+** This function returns SQLITE_OK if successful, or an SQLite error code
+** otherwise.
+*/
+SQLITE_API int sqlite3session_config(int op, void *pArg);
 
+/*
+** CAPI3REF: Values for sqlite3session_config().
+*/
+#define SQLITE_SESSION_CONFIG_STRMSIZE 1
 
 /*
 ** Make sure we can call this stuff from C++.
@@ -10254,8 +11218,8 @@ struct Fts5PhraseIter {
 **   an error code (i.e. SQLITE_NOMEM) if an error occurs.
 **
 **   This API can be quite slow if used with an FTS5 table created with the
-**   "detail=none" or "detail=column" option. If the FTS5 table is created
-**   with either "detail=none" or "detail=column" and "content=" option
+**   "detail=none" or "detail=column" option. If the FTS5 table is created 
+**   with either "detail=none" or "detail=column" and "content=" option 
 **   (i.e. if it is a contentless table), then this API always returns 0.
 **
 ** xInst:
@@ -10274,7 +11238,7 @@ struct Fts5PhraseIter {
 **   if an error occurs.
 **
 **   This API can be quite slow if used with an FTS5 table created with the
-**   "detail=none" or "detail=column" option.
+**   "detail=none" or "detail=column" option. 
 **
 ** xRowid:
 **   Returns the rowid of the current row.
@@ -10290,11 +11254,11 @@ struct Fts5PhraseIter {
 **
 **   with $p set to a phrase equivalent to the phrase iPhrase of the
 **   current query is executed. Any column filter that applies to
-**   phrase iPhrase of the current query is included in $p. For each
-**   row visited, the callback function passed as the fourth argument
-**   is invoked. The context and API objects passed to the callback
+**   phrase iPhrase of the current query is included in $p. For each 
+**   row visited, the callback function passed as the fourth argument 
+**   is invoked. The context and API objects passed to the callback 
 **   function may be used to access the properties of each matched row.
-**   Invoking Api.xUserData() returns a copy of the pointer passed as
+**   Invoking Api.xUserData() returns a copy of the pointer passed as 
 **   the third argument to pUserData.
 **
 **   If the callback function returns any value other than SQLITE_OK, the
@@ -10373,8 +11337,8 @@ struct Fts5PhraseIter {
 **   xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
 **
 **   This API can be quite slow if used with an FTS5 table created with the
-**   "detail=none" or "detail=column" option. If the FTS5 table is created
-**   with either "detail=none" or "detail=column" and "content=" option
+**   "detail=none" or "detail=column" option. If the FTS5 table is created 
+**   with either "detail=none" or "detail=column" and "content=" option 
 **   (i.e. if it is a contentless table), then this API always iterates
 **   through an empty set (all calls to xPhraseFirst() set iCol to -1).
 **
@@ -10398,16 +11362,16 @@ struct Fts5PhraseIter {
 **       }
 **
 **   This API can be quite slow if used with an FTS5 table created with the
-**   "detail=none" option. If the FTS5 table is created with either
-**   "detail=none" "content=" option (i.e. if it is a contentless table),
-**   then this API always iterates through an empty set (all calls to
+**   "detail=none" option. If the FTS5 table is created with either 
+**   "detail=none" "content=" option (i.e. if it is a contentless table), 
+**   then this API always iterates through an empty set (all calls to 
 **   xPhraseFirstColumn() set iCol to -1).
 **
 **   The information accessed using this API and its companion
 **   xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
 **   (or xInst/xInstCount). The chief advantage of this API is that it is
 **   significantly more efficient than those alternatives when used with
-**   "detail=column" tables.
+**   "detail=column" tables.  
 **
 ** xPhraseNextColumn()
 **   See xPhraseFirstColumn above.
@@ -10590,7 +11554,7 @@ struct Fts5ExtensionApi {
 **            This way, even if the tokenizer does not provide synonyms
 **            when tokenizing query text (it should not - to do would be
 **            inefficient), it doesn't matter if the user queries for 
-**            'first + place' or '1st + place', as there are entires in the
+**            'first + place' or '1st + place', as there are entries in the
 **            FTS index corresponding to both forms of the first token.
 **   </ol>
 **
@@ -10618,7 +11582,7 @@ struct Fts5ExtensionApi {
 **   extra data to the FTS index or require FTS5 to query for multiple terms,
 **   so it is efficient in terms of disk space and query speed. However, it
 **   does not support prefix queries very well. If, as suggested above, the
-**   token "first" is subsituted for "1st" by the tokenizer, then the query:
+**   token "first" is substituted for "1st" by the tokenizer, then the query:
 **
 **   <codeblock>
 **     ... MATCH '1s*'</codeblock>