amalgalite 1.5.0 → 1.6.0

data/ext/amalgalite/c/sqlite3.h

@@ -1,5 +1,5 @@
 /*
-** 2001 September 15
+** 2001-09-15
 **
 ** The author disclaims copyright to this source code.  In place of
 ** a legal notice, here is a blessing:
@@ -30,8 +30,8 @@
 ** the version number) and changes its name to "sqlite3.h" as
 ** part of the build process.
 */
-#ifndef _SQLITE3_H_
-#define _SQLITE3_H_
+#ifndef SQLITE3_H
+#define SQLITE3_H
 #include <stdarg.h>     /* Needed for the definition of va_list */
 
 /*
@@ -54,8 +54,17 @@ extern "C" {
 #ifndef SQLITE_CDECL
 # define SQLITE_CDECL
 #endif
+#ifndef SQLITE_APICALL
+# define SQLITE_APICALL
+#endif
 #ifndef SQLITE_STDCALL
-# define SQLITE_STDCALL
+# define SQLITE_STDCALL SQLITE_APICALL
+#endif
+#ifndef SQLITE_CALLBACK
+# define SQLITE_CALLBACK
+#endif
+#ifndef SQLITE_SYSAPI
+# define SQLITE_SYSAPI
 #endif
 
 /*
@@ -99,25 +108,28 @@ extern "C" {
 ** be held constant and Z will be incremented or else Y will be incremented
 ** and Z will be reset to zero.
 **
-** Since version 3.6.18, SQLite source code has been stored in the
+** Since [version 3.6.18] ([dateof:3.6.18]),
+** SQLite source code has been stored in the
 ** <a href="http://www.fossil-scm.org/">Fossil configuration management
 ** system</a>.  ^The SQLITE_SOURCE_ID macro evaluates to
 ** a string which identifies a particular check-in of SQLite
 ** within its configuration management system.  ^The SQLITE_SOURCE_ID
-** string contains the date and time of the check-in (UTC) and an SHA1
-** hash of the entire source tree.
+** string contains the date and time of the check-in (UTC) and a SHA1
+** or SHA3-256 hash of the entire source tree.  If the source code has
+** been edited in any way since it was last checked in, then the last
+** four hexadecimal digits of the hash may be modified.
 **
 ** See also: [sqlite3_libversion()],
 ** [sqlite3_libversion_number()], [sqlite3_sourceid()],
 ** [sqlite_version()] and [sqlite_source_id()].
 */
-#define SQLITE_VERSION        "3.9.2"
-#define SQLITE_VERSION_NUMBER 3009002
-#define SQLITE_SOURCE_ID      "2015-11-02 18:31:45 bda77dda9697c463c3d0704014d51627fceee328"
+#define SQLITE_VERSION        "3.21.0"
+#define SQLITE_VERSION_NUMBER 3021000
+#define SQLITE_SOURCE_ID      "2017-10-24 18:55:49 1a584e499906b5c87ec7d43d4abce641fdf017c42125b083109bc77c4de48827"
 
 /*
 ** CAPI3REF: Run-Time Library Version Numbers
-** KEYWORDS: sqlite3_version, sqlite3_sourceid
+** KEYWORDS: sqlite3_version sqlite3_sourceid
 **
 ** These interfaces provide the same information as the [SQLITE_VERSION],
 ** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
@@ -129,7 +141,7 @@ extern "C" {
 **
 ** <blockquote><pre>
 ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
+** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 );
 ** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
 ** </pre></blockquote>)^
 **
@@ -139,16 +151,18 @@ extern "C" {
 ** function is provided for use in DLLs since DLL users usually do not have
 ** direct access to string constants within the DLL.  ^The
 ** sqlite3_libversion_number() function returns an integer equal to
-** [SQLITE_VERSION_NUMBER].  ^The sqlite3_sourceid() function returns 
+** [SQLITE_VERSION_NUMBER].  ^(The sqlite3_sourceid() function returns
 ** a pointer to a string constant whose value is the same as the 
-** [SQLITE_SOURCE_ID] C preprocessor macro.
+** [SQLITE_SOURCE_ID] C preprocessor macro.  Except if SQLite is built
+** using an edited copy of [the amalgamation], then the last four characters
+** of the hash might be different from [SQLITE_SOURCE_ID].)^
 **
 ** See also: [sqlite_version()] and [sqlite_source_id()].
 */
 SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+SQLITE_API const char *sqlite3_libversion(void);
+SQLITE_API const char *sqlite3_sourceid(void);
+SQLITE_API int sqlite3_libversion_number(void);
 
 /*
 ** CAPI3REF: Run-Time Library Compilation Options Diagnostics
@@ -173,8 +187,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
 ** [sqlite_compileoption_get()] and the [compile_options pragma].
 */
 #ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+SQLITE_API int sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *sqlite3_compileoption_get(int N);
 #endif
 
 /*
@@ -213,7 +227,7 @@ SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
 **
 ** See the [threading mode] documentation for additional information.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
+SQLITE_API int sqlite3_threadsafe(void);
 
 /*
 ** CAPI3REF: Database Connection Handle
@@ -249,7 +263,11 @@ typedef struct sqlite3 sqlite3;
 */
 #ifdef SQLITE_INT64_TYPE
   typedef SQLITE_INT64_TYPE sqlite_int64;
-  typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# ifdef SQLITE_UINT64_TYPE
+    typedef SQLITE_UINT64_TYPE sqlite_uint64;
+# else
+    typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
+# endif
 #elif defined(_MSC_VER) || defined(__BORLANDC__)
   typedef __int64 sqlite_int64;
   typedef unsigned __int64 sqlite_uint64;
@@ -310,8 +328,8 @@ typedef sqlite_uint64 sqlite3_uint64;
 ** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
 ** argument is a harmless no-op.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
+SQLITE_API int sqlite3_close(sqlite3*);
+SQLITE_API int sqlite3_close_v2(sqlite3*);
 
 /*
 ** The type for a callback function.
@@ -347,7 +365,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**);
 ** from [sqlite3_malloc()] and passed back through the 5th parameter.
 ** To avoid memory leaks, the application should invoke [sqlite3_free()]
 ** on error message strings returned through the 5th parameter of
-** of sqlite3_exec() after the error message string is no longer needed.
+** sqlite3_exec() after the error message string is no longer needed.
 ** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
 ** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
 ** NULL before returning.
@@ -382,7 +400,7 @@ typedef int (*sqlite3_callback)(void*,int,char**, char**);
 **      the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
 ** </ul>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
+SQLITE_API int sqlite3_exec(
   sqlite3*,                                  /* An open database */
   const char *sql,                           /* SQL to be evaluated */
   int (*callback)(void*,int,char**,char**),  /* Callback function */
@@ -403,7 +421,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 */
 #define SQLITE_OK           0   /* Successful result */
 /* beginning-of-error-codes */
-#define SQLITE_ERROR        1   /* SQL error or missing database */
+#define SQLITE_ERROR        1   /* Generic error */
 #define SQLITE_INTERNAL     2   /* Internal logic error in SQLite */
 #define SQLITE_PERM         3   /* Access permission denied */
 #define SQLITE_ABORT        4   /* Callback routine requested an abort */
@@ -418,7 +436,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 #define SQLITE_FULL        13   /* Insertion failed because database is full */
 #define SQLITE_CANTOPEN    14   /* Unable to open the database file */
 #define SQLITE_PROTOCOL    15   /* Database lock protocol error */
-#define SQLITE_EMPTY       16   /* Database is empty */
+#define SQLITE_EMPTY       16   /* Internal use only */
 #define SQLITE_SCHEMA      17   /* The database schema changed */
 #define SQLITE_TOOBIG      18   /* String or BLOB exceeds size limit */
 #define SQLITE_CONSTRAINT  19   /* Abort due to constraint violation */
@@ -426,7 +444,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 #define SQLITE_MISUSE      21   /* Library used incorrectly */
 #define SQLITE_NOLFS       22   /* Uses OS features not supported on host */
 #define SQLITE_AUTH        23   /* Authorization denied */
-#define SQLITE_FORMAT      24   /* Auxiliary database format error */
+#define SQLITE_FORMAT      24   /* Not used */
 #define SQLITE_RANGE       25   /* 2nd parameter to sqlite3_bind out of range */
 #define SQLITE_NOTADB      26   /* File opened that is not a database file */
 #define SQLITE_NOTICE      27   /* Notifications from sqlite3_log() */
@@ -443,7 +461,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 ** [result codes].  However, experience has shown that many of
 ** these result codes are too coarse-grained.  They do not provide as
 ** much information about problems as programmers might like.  In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
+** address this, newer versions of SQLite (version 3.3.8 [dateof:3.3.8]
+** and later) include
 ** support for additional result codes that provide more detailed information
 ** about errors. These [extended result codes] are enabled or disabled
 ** on a per database connection basis using the
@@ -478,6 +497,10 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 #define SQLITE_IOERR_GETTEMPPATH       (SQLITE_IOERR | (25<<8))
 #define SQLITE_IOERR_CONVPATH          (SQLITE_IOERR | (26<<8))
 #define SQLITE_IOERR_VNODE             (SQLITE_IOERR | (27<<8))
+#define SQLITE_IOERR_AUTH              (SQLITE_IOERR | (28<<8))
+#define SQLITE_IOERR_BEGIN_ATOMIC      (SQLITE_IOERR | (29<<8))
+#define SQLITE_IOERR_COMMIT_ATOMIC     (SQLITE_IOERR | (30<<8))
+#define SQLITE_IOERR_ROLLBACK_ATOMIC   (SQLITE_IOERR | (31<<8))
 #define SQLITE_LOCKED_SHAREDCACHE      (SQLITE_LOCKED |  (1<<8))
 #define SQLITE_BUSY_RECOVERY           (SQLITE_BUSY   |  (1<<8))
 #define SQLITE_BUSY_SNAPSHOT           (SQLITE_BUSY   |  (2<<8))
@@ -505,6 +528,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 #define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
 #define SQLITE_WARNING_AUTOINDEX       (SQLITE_WARNING | (1<<8))
 #define SQLITE_AUTH_USER               (SQLITE_AUTH | (1<<8))
+#define SQLITE_OK_LOAD_PERMANENTLY     (SQLITE_OK | (1<<8))
 
 /*
 ** CAPI3REF: Flags For File Open Operations
@@ -559,10 +583,15 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 ** file that were written at the application level might have changed
 ** and that adjacent bytes, even bytes within the same sector are
 ** guaranteed to be unchanged.  The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
-** flag indicate that a file cannot be deleted when open.  The
+** flag indicates that a file cannot be deleted when open.  The
 ** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
 ** read-only media and cannot be changed even by processes with
 ** elevated privileges.
+**
+** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying
+** filesystem supports doing multiple write operations atomically when those
+** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and
+** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].
 */
 #define SQLITE_IOCAP_ATOMIC                 0x00000001
 #define SQLITE_IOCAP_ATOMIC512              0x00000002
@@ -578,6 +607,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_exec(
 #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN  0x00000800
 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE    0x00001000
 #define SQLITE_IOCAP_IMMUTABLE              0x00002000
+#define SQLITE_IOCAP_BATCH_ATOMIC           0x00004000
 
 /*
 ** CAPI3REF: File Locking Levels
@@ -709,6 +739,10 @@ struct sqlite3_file {
 ** <li> [SQLITE_IOCAP_ATOMIC64K]
 ** <li> [SQLITE_IOCAP_SAFE_APPEND]
 ** <li> [SQLITE_IOCAP_SEQUENTIAL]
+** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN]
+** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE]
+** <li> [SQLITE_IOCAP_IMMUTABLE]
+** <li> [SQLITE_IOCAP_BATCH_ATOMIC]
 ** </ul>
 **
 ** The SQLITE_IOCAP_ATOMIC property means that all writes of
@@ -793,8 +827,13 @@ struct sqlite3_io_methods {
 ** <li>[[SQLITE_FCNTL_FILE_POINTER]]
 ** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
 ** to the [sqlite3_file] object associated with a particular database
-** connection.  See the [sqlite3_file_control()] documentation for
-** additional information.
+** connection.  See also [SQLITE_FCNTL_JOURNAL_POINTER].
+**
+** <li>[[SQLITE_FCNTL_JOURNAL_POINTER]]
+** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
+** to the [sqlite3_file] object associated with the journal file (either
+** the [rollback journal] or the [write-ahead log]) for a particular database
+** connection.  See also [SQLITE_FCNTL_FILE_POINTER].
 **
 ** <li>[[SQLITE_FCNTL_SYNC_OMITTED]]
 ** No longer in use.
@@ -832,7 +871,7 @@ struct sqlite3_io_methods {
 ** opcode allows these two values (10 retries and 25 milliseconds of delay)
 ** to be adjusted.  The values are changed for all database connections
 ** within the same process.  The argument is a pointer to an array of two
-** integers where the first integer i the new retry count and the second
+** integers where the first integer is the new retry count and the second
 ** integer is the delay.  If either integer is negative, then the setting
 ** is not changed but instead the prior value of that setting is written
 ** into the array entry, allowing the current retry settings to be
@@ -881,6 +920,15 @@ struct sqlite3_io_methods {
 ** pointer in case this file-control is not implemented.  This file-control
 ** is intended for diagnostic use only.
 **
+** <li>[[SQLITE_FCNTL_VFS_POINTER]]
+** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
+** [VFSes] currently in use.  ^(The argument X in
+** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
+** of type "[sqlite3_vfs] **".  This opcodes will set *X
+** to a pointer to the top-level VFS.)^
+** ^When there are multiple VFS shims in the stack, this opcode finds the
+** upper-most shim only.
+**
 ** <li>[[SQLITE_FCNTL_PRAGMA]]
 ** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA] 
 ** file control is sent to the open [sqlite3_file] object corresponding
@@ -951,6 +999,12 @@ struct sqlite3_io_methods {
 ** on whether or not the file has been renamed, moved, or deleted since it
 ** was first opened.
 **
+** <li>[[SQLITE_FCNTL_WIN32_GET_HANDLE]]
+** The [SQLITE_FCNTL_WIN32_GET_HANDLE] opcode can be used to obtain the
+** underlying native file handle associated with a file handle.  This file
+** control interprets its argument as a pointer to a native file handle and
+** writes the resulting value there.
+**
 ** <li>[[SQLITE_FCNTL_WIN32_SET_HANDLE]]
 ** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging.  This
 ** opcode causes the xFileControl method to swap the file handle with the one
@@ -972,6 +1026,40 @@ struct sqlite3_io_methods {
 ** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
 ** the RBU extension only.  All other VFS should return SQLITE_NOTFOUND for
 ** this opcode.  
+**
+** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]]
+** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then
+** the file descriptor is placed in "batch write mode", which
+** means all subsequent write operations will be deferred and done
+** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE].  Systems
+** that do not support batch atomic writes will return SQLITE_NOTFOUND.
+** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to
+** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or
+** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make
+** no VFS interface calls on the same [sqlite3_file] file descriptor
+** except for calls to the xWrite method and the xFileControl method
+** with [SQLITE_FCNTL_SIZE_HINT].
+**
+** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically.
+** This file control returns [SQLITE_OK] if and only if the writes were
+** all performed successfully and have been committed to persistent storage.
+** ^Regardless of whether or not it is successful, this file control takes
+** the file descriptor out of batch write mode so that all subsequent
+** write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
+**
+** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]]
+** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write
+** operations since the previous successful call to
+** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back.
+** ^This file control takes the file descriptor out of batch write mode
+** so that all subsequent write operations are independent.
+** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without
+** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE].
 ** </ul>
 */
 #define SQLITE_FCNTL_LOCKSTATE               1
@@ -999,6 +1087,13 @@ struct sqlite3_io_methods {
 #define SQLITE_FCNTL_WAL_BLOCK              24
 #define SQLITE_FCNTL_ZIPVFS                 25
 #define SQLITE_FCNTL_RBU                    26
+#define SQLITE_FCNTL_VFS_POINTER            27
+#define SQLITE_FCNTL_JOURNAL_POINTER        28
+#define SQLITE_FCNTL_WIN32_GET_HANDLE       29
+#define SQLITE_FCNTL_PDB                    30
+#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE     31
+#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE    32
+#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE  33
 
 /* deprecated names */
 #define SQLITE_GET_LOCKPROXYFILE      SQLITE_FCNTL_GET_LOCKPROXYFILE
@@ -1018,6 +1113,16 @@ struct sqlite3_io_methods {
 */
 typedef struct sqlite3_mutex sqlite3_mutex;
 
+/*
+** CAPI3REF: Loadable Extension Thunk
+**
+** A pointer to the opaque sqlite3_api_routines structure is passed as
+** the third parameter to entry points of [loadable extensions].  This
+** structure must be typedefed in order to work around compiler warnings
+** on some platforms.
+*/
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
 /*
 ** CAPI3REF: OS Interface Object
 **
@@ -1211,7 +1316,7 @@ struct sqlite3_vfs {
   const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
   /*
   ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
-  ** New fields may be appended in figure versions.  The iVersion
+  ** New fields may be appended in future versions.  The iVersion
   ** value will increment whenever this happens. 
   */
 };
@@ -1353,10 +1458,10 @@ struct sqlite3_vfs {
 ** must return [SQLITE_OK] on success and some other [error code] upon
 ** failure.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
+SQLITE_API int sqlite3_initialize(void);
+SQLITE_API int sqlite3_shutdown(void);
+SQLITE_API int sqlite3_os_init(void);
+SQLITE_API int sqlite3_os_end(void);
 
 /*
 ** CAPI3REF: Configuring The SQLite Library
@@ -1389,7 +1494,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
 ** ^If the option is unknown or SQLite is unable to set the option
 ** then this routine returns a non-zero [error code].
 */
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
+SQLITE_API int sqlite3_config(int, ...);
 
 /*
 ** CAPI3REF: Configure database connections
@@ -1408,7 +1513,7 @@ SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
 ** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
 ** the call is considered successful.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_db_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Memory Allocation Routines
@@ -1559,6 +1664,16 @@ struct sqlite3_mem_methods {
 ** routines with a wrapper that simulations memory allocation failure or
 ** tracks memory usage, for example. </dd>
 **
+** [[SQLITE_CONFIG_SMALL_MALLOC]] <dt>SQLITE_CONFIG_SMALL_MALLOC</dt>
+** <dd> ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of
+** type int, interpreted as a boolean, which if true provides a hint to
+** SQLite that it should avoid large memory allocations if possible.
+** SQLite will run faster if it is free to make large memory allocations,
+** but some application might prefer to run slower in exchange for
+** guarantees about memory fragmentation that are possible if large
+** allocations are avoided.  This hint is normally off.
+** </dd>
+**
 ** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt>
 ** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int,
 ** interpreted as a boolean, which enables or disables the collection of
@@ -1576,57 +1691,43 @@ struct sqlite3_mem_methods {
 ** </dd>
 **
 ** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt>
-** <dd> ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer
-** that SQLite can use for scratch memory.  ^(There are three arguments
-** to SQLITE_CONFIG_SCRATCH:  A pointer an 8-byte
-** aligned memory buffer from which the scratch allocations will be
-** drawn, the size of each scratch allocation (sz),
-** and the maximum number of scratch allocations (N).)^
-** The first argument must be a pointer to an 8-byte aligned buffer
-** of at least sz*N bytes of memory.
-** ^SQLite will not use more than one scratch buffers per thread.
-** ^SQLite will never request a scratch buffer that is more than 6
-** times the database page size.
-** ^If SQLite needs needs additional
-** scratch memory beyond what is provided by this configuration option, then 
-** [sqlite3_malloc()] will be used to obtain the memory needed.<p>
-** ^When the application provides any amount of scratch memory using
-** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large
-** [sqlite3_malloc|heap allocations].
-** This can help [Robson proof|prevent memory allocation failures] due to heap
-** fragmentation in low-memory embedded systems.
+** <dd> The SQLITE_CONFIG_SCRATCH option is no longer used.
 ** </dd>
 **
 ** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt>
-** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a static memory buffer
+** <dd> ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
 ** that SQLite can use for the database page cache with the default page
 ** cache implementation.  
-** This configuration should not be used if an application-define page
-** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2]
-** configuration option.
+** This configuration option is a no-op if an application-define page
+** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
 ** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
-** 8-byte aligned
-** memory, the size of each page buffer (sz), and the number of pages (N).
+** 8-byte aligned memory (pMem), the size of each page cache line (sz),
+** and the number of cache lines (N).
 ** The sz argument should be the size of the largest database page
 ** (a power of two between 512 and 65536) plus some extra bytes for each
 ** page header.  ^The number of extra bytes needed by the page header
-** can be determined using the [SQLITE_CONFIG_PCACHE_HDRSZ] option 
-** to [sqlite3_config()].
+** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
 ** ^It is harmless, apart from the wasted memory,
-** for the sz parameter to be larger than necessary.  The first
-** argument should pointer to an 8-byte aligned block of memory that
-** is at least sz*N bytes of memory, otherwise subsequent behavior is
-** undefined.
-** ^SQLite will use the memory provided by the first argument to satisfy its
-** memory needs for the first N pages that it adds to cache.  ^If additional
-** page cache memory is needed beyond what is provided by this option, then
-** SQLite goes to [sqlite3_malloc()] for the additional storage space.</dd>
+** for the sz parameter to be larger than necessary.  The pMem
+** argument must be either a NULL pointer or a pointer to an 8-byte
+** aligned block of memory of at least sz*N bytes, otherwise
+** subsequent behavior is undefined.
+** ^When pMem is not NULL, SQLite will strive to use the memory provided
+** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
+** a page cache line is larger than sz bytes or if all of the pMem buffer
+** is exhausted.
+** ^If pMem is NULL and N is non-zero, then each database connection
+** does an initial bulk allocation for page cache memory
+** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
+** of -1024*N bytes if N is negative, . ^If additional
+** page cache memory is needed beyond what is provided by the initial
+** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
+** additional cache line. </dd>
 **
 ** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt>
 ** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer 
 ** that SQLite will use for all of its dynamic memory allocation needs
-** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and
-** [SQLITE_CONFIG_PAGECACHE].
+** beyond those provided for by [SQLITE_CONFIG_PAGECACHE].
 ** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
 ** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns
 ** [SQLITE_ERROR] if invoked otherwise.
@@ -1798,6 +1899,20 @@ struct sqlite3_mem_methods {
 ** is enabled (using the [PRAGMA threads] command) and the amount of content
 ** to be sorted exceeds the page size times the minimum of the
 ** [PRAGMA cache_size] setting and this value.
+**
+** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
+** <dt>SQLITE_CONFIG_STMTJRNL_SPILL
+** <dd>^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
+** becomes the [statement journal] spill-to-disk threshold.
+** [Statement journals] are held in memory until their size (in bytes)
+** exceeds this threshold, at which point they are written to disk.
+** Or if the threshold is -1, statement journals are always held
+** exclusively in memory.
+** Since many statement journals never become large, setting the spill
+** threshold to a value such as 64KiB can greatly reduce the amount of
+** I/O required to support statement rollback.
+** The default value for this setting is controlled by the
+** [SQLITE_STMTJRNL_SPILL] compile-time option.
 ** </dl>
 */
 #define SQLITE_CONFIG_SINGLETHREAD  1  /* nil */
@@ -1805,7 +1920,7 @@ struct sqlite3_mem_methods {
 #define SQLITE_CONFIG_SERIALIZED    3  /* nil */
 #define SQLITE_CONFIG_MALLOC        4  /* sqlite3_mem_methods* */
 #define SQLITE_CONFIG_GETMALLOC     5  /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_SCRATCH       6  /* void*, int sz, int N */
+#define SQLITE_CONFIG_SCRATCH       6  /* No longer used */
 #define SQLITE_CONFIG_PAGECACHE     7  /* void*, int sz, int N */
 #define SQLITE_CONFIG_HEAP          8  /* void*, int nByte, int min */
 #define SQLITE_CONFIG_MEMSTATUS     9  /* boolean */
@@ -1825,6 +1940,8 @@ struct sqlite3_mem_methods {
 #define SQLITE_CONFIG_WIN32_HEAPSIZE      23  /* int nByte */
 #define SQLITE_CONFIG_PCACHE_HDRSZ        24  /* int *psz */
 #define SQLITE_CONFIG_PMASZ               25  /* unsigned int szPma */
+#define SQLITE_CONFIG_STMTJRNL_SPILL      26  /* int nByte */
+#define SQLITE_CONFIG_SMALL_MALLOC        27  /* boolean */
 
 /*
 ** CAPI3REF: Database Connection Configuration Options
@@ -1882,11 +1999,78 @@ struct sqlite3_mem_methods {
 ** following this call.  The second parameter may be a NULL pointer, in
 ** which case the trigger setting is not reported back. </dd>
 **
+** <dt>SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER</dt>
+** <dd> ^This option is used to enable or disable the two-argument
+** version of the [fts3_tokenizer()] function which is part of the
+** [FTS3] full-text search engine extension.
+** There should be two additional arguments.
+** The first argument is an integer which is 0 to disable fts3_tokenizer() or
+** positive to enable fts3_tokenizer() or negative to leave the setting
+** unchanged.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
+** following this call.  The second parameter may be a NULL pointer, in
+** which case the new setting is not reported back. </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION</dt>
+** <dd> ^This option is used to enable or disable the [sqlite3_load_extension()]
+** interface independently of the [load_extension()] SQL function.
+** The [sqlite3_enable_load_extension()] API enables or disables both the
+** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
+** There should be two additional arguments.
+** When the first argument to this interface is 1, then only the C-API is
+** enabled and the SQL function remains disabled.  If the first argument to
+** this interface is 0, then both the C-API and the SQL function are disabled.
+** If the first argument is -1, then no changes are made to state of either the
+** C-API or the SQL function.
+** The second parameter is a pointer to an integer into which
+** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
+** is disabled or enabled following this call.  The second parameter may
+** be a NULL pointer, in which case the new setting is not reported back.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_MAINDBNAME</dt>
+** <dd> ^This option is used to change the name of the "main" database
+** schema.  ^The sole argument is a pointer to a constant UTF8 string
+** which will become the new schema name in place of "main".  ^SQLite
+** does not make a copy of the new main schema name string, so the application
+** must ensure that the argument passed into this DBCONFIG option is unchanged
+** until after the database connection closes.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE</dt>
+** <dd> Usually, when a database in wal mode is closed or detached from a
+** database handle, SQLite checks if this will mean that there are now no
+** connections at all to the database. If so, it performs a checkpoint
+** operation before closing the connection. This option may be used to
+** override this behaviour. The first parameter passed to this operation
+** is an integer - non-zero to disable checkpoints-on-close, or zero (the
+** default) to enable them. The second parameter is a pointer to an integer
+** into which is written 0 or 1 to indicate whether checkpoints-on-close
+** have been disabled - 0 if they are not disabled, 1 if they are.
+** </dd>
+**
+** <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt>
+** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates
+** the [query planner stability guarantee] (QPSG).  When the QPSG is active,
+** a single SQL query statement will always use the same algorithm regardless
+** of values of [bound parameters].)^ The QPSG disables some query optimizations
+** that look at the values of bound parameters, which can make some queries
+** slower.  But the QPSG has the advantage of more predictable behavior.  With
+** the QPSG active, SQLite will always use the same query plan in the field as
+** was used during testing in the lab.
+** </dd>
+**
 ** </dl>
 */
-#define SQLITE_DBCONFIG_LOOKASIDE       1001  /* void* int int */
-#define SQLITE_DBCONFIG_ENABLE_FKEY     1002  /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_TRIGGER  1003  /* int int* */
+#define SQLITE_DBCONFIG_MAINDBNAME            1000 /* const char* */
+#define SQLITE_DBCONFIG_LOOKASIDE             1001 /* void* int int */
+#define SQLITE_DBCONFIG_ENABLE_FKEY           1002 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_TRIGGER        1003 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
+#define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE      1006 /* int int* */
+#define SQLITE_DBCONFIG_ENABLE_QPSG           1007 /* int int* */
 
 
 /*
@@ -1897,7 +2081,7 @@ struct sqlite3_mem_methods {
 ** [extended result codes] feature of SQLite. ^The extended result
 ** codes are disabled by default for historical compatibility.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
+SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff);
 
 /*
 ** CAPI3REF: Last Insert Rowid
@@ -1911,20 +2095,30 @@ SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff)
 ** the table has a column of type [INTEGER PRIMARY KEY] then that column
 ** is another alias for the rowid.
 **
-** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the 
-** most recent successful [INSERT] into a rowid table or [virtual table]
-** on database connection D.
-** ^Inserts into [WITHOUT ROWID] tables are not recorded.
-** ^If no successful [INSERT]s into rowid tables
-** have ever occurred on the database connection D, 
-** then sqlite3_last_insert_rowid(D) returns zero.
-**
-** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
-** method, then this routine will return the [rowid] of the inserted
-** row as long as the trigger or virtual table method is running.
-** But once the trigger or virtual table method ends, the value returned 
-** by this routine reverts to what it was before the trigger or virtual
-** table method began.)^
+** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of
+** the most recent successful [INSERT] into a rowid table or [virtual table]
+** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not
+** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred
+** on the database connection D, then sqlite3_last_insert_rowid(D) returns
+** zero.
+**
+** As well as being set automatically as rows are inserted into database
+** tables, the value returned by this function may be set explicitly by
+** [sqlite3_set_last_insert_rowid()]
+**
+** Some virtual table implementations may INSERT rows into rowid tables as
+** part of committing a transaction (e.g. to flush data accumulated in memory
+** to disk). In this case subsequent calls to this function return the rowid
+** associated with these internal INSERT operations, which leads to
+** unintuitive results. Virtual table implementations that do write to rowid
+** tables in this way can avoid this problem by restoring the original
+** rowid value using [sqlite3_set_last_insert_rowid()] before returning
+** control to the user.
+**
+** ^(If an [INSERT] occurs within a trigger then this routine will
+** return the [rowid] of the inserted row as long as the trigger is
+** running. Once the trigger program ends, the value returned
+** by this routine reverts to what it was before the trigger was fired.)^
 **
 ** ^An [INSERT] that fails due to a constraint violation is not a
 ** successful [INSERT] and does not change the value returned by this
@@ -1949,7 +2143,17 @@ SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff)
 ** unpredictable and might not equal either the old or the new
 ** last insert [rowid].
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
+SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*);
+
+/*
+** CAPI3REF: Set the Last Insert Rowid value.
+** METHOD: sqlite3
+**
+** The sqlite3_set_last_insert_rowid(D, R) method allows the application to
+** set the value returned by calling sqlite3_last_insert_rowid(D) to R
+** without inserting a row into the database.
+*/
+SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64);
 
 /*
 ** CAPI3REF: Count The Number Of Rows Modified
@@ -2002,7 +2206,7 @@ SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
 ** while [sqlite3_changes()] is running then the value returned
 ** is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
+SQLITE_API int sqlite3_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Total Number Of Rows Modified
@@ -2026,7 +2230,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
 ** while [sqlite3_total_changes()] is running then the value
 ** returned is unpredictable and not meaningful.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
+SQLITE_API int sqlite3_total_changes(sqlite3*);
 
 /*
 ** CAPI3REF: Interrupt A Long-Running Query
@@ -2062,11 +2266,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
 ** ^A call to sqlite3_interrupt(D) that occurs when there are no running
 ** SQL statements is a no-op and has no effect on SQL statements
 ** that are started after the sqlite3_interrupt() call returns.
-**
-** If the database connection closes while [sqlite3_interrupt()]
-** is running then bad things will likely happen.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
+SQLITE_API void sqlite3_interrupt(sqlite3*);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Is Complete
@@ -2101,8 +2302,8 @@ SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
 ** The input to [sqlite3_complete16()] must be a zero-terminated
 ** UTF-16 string in native byte order.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
+SQLITE_API int sqlite3_complete(const char *sql);
+SQLITE_API int sqlite3_complete16(const void *sql);
 
 /*
 ** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
@@ -2163,7 +2364,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
 ** A busy handler must not close the database connection
 ** or [prepared statement] that invoked the busy handler.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
+SQLITE_API int sqlite3_busy_handler(sqlite3*,int(*)(void*,int),void*);
 
 /*
 ** CAPI3REF: Set A Busy Timeout
@@ -2186,7 +2387,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int),
 **
 ** See also:  [PRAGMA busy_timeout]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
+SQLITE_API int sqlite3_busy_timeout(sqlite3*, int ms);
 
 /*
 ** CAPI3REF: Convenience Routines For Running Queries
@@ -2261,7 +2462,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
 ** reflected in subsequent calls to [sqlite3_errcode()] or
 ** [sqlite3_errmsg()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
+SQLITE_API int sqlite3_get_table(
   sqlite3 *db,          /* An open database */
   const char *zSql,     /* SQL to be evaluated */
   char ***pazResult,    /* Results of the query */
@@ -2269,7 +2470,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
   int *pnColumn,        /* Number of result columns written here */
   char **pzErrmsg       /* Error msg written here */
 );
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
+SQLITE_API void sqlite3_free_table(char **result);
 
 /*
 ** CAPI3REF: Formatted String Printing Functions
@@ -2375,10 +2576,10 @@ SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
 ** addition that after the string has been read and copied into
 ** the result, [sqlite3_free()] is called on the input string.)^
 */
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
+SQLITE_API char *sqlite3_mprintf(const char*,...);
+SQLITE_API char *sqlite3_vmprintf(const char*, va_list);
+SQLITE_API char *sqlite3_snprintf(int,char*,const char*, ...);
+SQLITE_API char *sqlite3_vsnprintf(int,char*,const char*, va_list);
 
 /*
 ** CAPI3REF: Memory Allocation Subsystem
@@ -2468,12 +2669,12 @@ SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list
 ** a block of memory after it has been released using
 ** [sqlite3_free()] or [sqlite3_realloc()].
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
+SQLITE_API void *sqlite3_malloc(int);
+SQLITE_API void *sqlite3_malloc64(sqlite3_uint64);
+SQLITE_API void *sqlite3_realloc(void*, int);
+SQLITE_API void *sqlite3_realloc64(void*, sqlite3_uint64);
+SQLITE_API void sqlite3_free(void*);
+SQLITE_API sqlite3_uint64 sqlite3_msize(void*);
 
 /*
 ** CAPI3REF: Memory Allocator Statistics
@@ -2498,8 +2699,8 @@ SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
 ** by [sqlite3_memory_highwater(1)] is the high-water mark
 ** prior to the reset.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
+SQLITE_API sqlite3_int64 sqlite3_memory_used(void);
+SQLITE_API sqlite3_int64 sqlite3_memory_highwater(int resetFlag);
 
 /*
 ** CAPI3REF: Pseudo-Random Number Generator
@@ -2522,17 +2723,19 @@ SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
 ** internally and without recourse to the [sqlite3_vfs] xRandomness
 ** method.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
+SQLITE_API void sqlite3_randomness(int N, void *P);
 
 /*
 ** CAPI3REF: Compile-Time Authorization Callbacks
 ** METHOD: sqlite3
+** KEYWORDS: {authorizer callback}
 **
 ** ^This routine registers an authorizer callback with a particular
 ** [database connection], supplied in the first argument.
 ** ^The authorizer callback is invoked as SQL statements are being compiled
 ** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
-** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()].  ^At various
+** [sqlite3_prepare_v3()], [sqlite3_prepare16()], [sqlite3_prepare16_v2()],
+** and [sqlite3_prepare16_v3()].  ^At various
 ** points during the compilation process, as logic is being created
 ** to perform various actions, the authorizer callback is invoked to
 ** see if those actions are allowed.  ^The authorizer callback should
@@ -2554,8 +2757,10 @@ SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
 ** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
 ** to the callback is an integer [SQLITE_COPY | action code] that specifies
 ** the particular action to be authorized. ^The third through sixth parameters
-** to the callback are zero-terminated strings that contain additional
-** details about the action to be authorized.
+** to the callback are either NULL pointers or zero-terminated strings
+** that contain additional details about the action to be authorized.
+** Applications must always be prepared to encounter a NULL pointer in any
+** of the third through the sixth parameters of the authorization callback.
 **
 ** ^If the action code is [SQLITE_READ]
 ** and the callback returns [SQLITE_IGNORE] then the
@@ -2564,6 +2769,10 @@ SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
 ** been read if [SQLITE_OK] had been returned.  The [SQLITE_IGNORE]
 ** return can be used to deny an untrusted user access to individual
 ** columns of a table.
+** ^When a table is referenced by a [SELECT] but no column values are
+** extracted from that table (for example in a query like
+** "SELECT count(*) FROM tab") then the [SQLITE_READ] authorizer callback
+** is invoked once for that table with a column name that is an empty string.
 ** ^If the action code is [SQLITE_DELETE] and the callback returns
 ** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
 ** [truncate optimization] is disabled and all rows are deleted individually.
@@ -2605,7 +2814,7 @@ SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
 ** as stated in the previous paragraph, sqlite3_step() invokes
 ** sqlite3_prepare_v2() to reprepare a statement after a schema change.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
+SQLITE_API int sqlite3_set_authorizer(
   sqlite3*,
   int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
   void *pUserData
@@ -2685,6 +2894,9 @@ SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
 ** CAPI3REF: Tracing And Profiling Functions
 ** METHOD: sqlite3
 **
+** These routines are deprecated. Use the [sqlite3_trace_v2()] interface
+** instead of the routines described here.
+**
 ** These routines register callback functions that can be used for
 ** tracing and profiling the execution of SQL statements.
 **
@@ -2710,10 +2922,104 @@ SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
 ** sqlite3_profile() function is considered experimental and is
 ** subject to change in future versions of SQLite.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_trace(sqlite3*,
+   void(*xTrace)(void*,const char*), void*);
+SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*,
    void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
 
+/*
+** CAPI3REF: SQL Trace Event Codes
+** KEYWORDS: SQLITE_TRACE
+**
+** These constants identify classes of events that can be monitored
+** using the [sqlite3_trace_v2()] tracing logic.  The third argument
+** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of
+** the following constants.  ^The first argument to the trace callback
+** is one of the following constants.
+**
+** New tracing constants may be added in future releases.
+**
+** ^A trace callback has four arguments: xCallback(T,C,P,X).
+** ^The T argument is one of the integer type codes above.
+** ^The C argument is a copy of the context pointer passed in as the
+** fourth argument to [sqlite3_trace_v2()].
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** <dl>
+** [[SQLITE_TRACE_STMT]] <dt>SQLITE_TRACE_STMT</dt>
+** <dd>^An SQLITE_TRACE_STMT callback is invoked when a prepared statement
+** first begins running and possibly at other times during the
+** execution of the prepared statement, such as at the start of each
+** trigger subprogram. ^The P argument is a pointer to the
+** [prepared statement]. ^The X argument is a pointer to a string which
+** is the unexpanded SQL text of the prepared statement or an SQL comment
+** that indicates the invocation of a trigger.  ^The callback can compute
+** the same text that would have been returned by the legacy [sqlite3_trace()]
+** interface by using the X argument when X begins with "--" and invoking
+** [sqlite3_expanded_sql(P)] otherwise.
+**
+** [[SQLITE_TRACE_PROFILE]] <dt>SQLITE_TRACE_PROFILE</dt>
+** <dd>^An SQLITE_TRACE_PROFILE callback provides approximately the same
+** information as is provided by the [sqlite3_profile()] callback.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument points to a 64-bit integer which is the estimated of
+** the number of nanosecond that the prepared statement took to run.
+** ^The SQLITE_TRACE_PROFILE callback is invoked when the statement finishes.
+**
+** [[SQLITE_TRACE_ROW]] <dt>SQLITE_TRACE_ROW</dt>
+** <dd>^An SQLITE_TRACE_ROW callback is invoked whenever a prepared
+** statement generates a single row of result.
+** ^The P argument is a pointer to the [prepared statement] and the
+** X argument is unused.
+**
+** [[SQLITE_TRACE_CLOSE]] <dt>SQLITE_TRACE_CLOSE</dt>
+** <dd>^An SQLITE_TRACE_CLOSE callback is invoked when a database
+** connection closes.
+** ^The P argument is a pointer to the [database connection] object
+** and the X argument is unused.
+** </dl>
+*/
+#define SQLITE_TRACE_STMT       0x01
+#define SQLITE_TRACE_PROFILE    0x02
+#define SQLITE_TRACE_ROW        0x04
+#define SQLITE_TRACE_CLOSE      0x08
+
+/*
+** CAPI3REF: SQL Trace Hook
+** METHOD: sqlite3
+**
+** ^The sqlite3_trace_v2(D,M,X,P) interface registers a trace callback
+** function X against [database connection] D, using property mask M
+** and context pointer P.  ^If the X callback is
+** NULL or if the M mask is zero, then tracing is disabled.  The
+** M argument should be the bitwise OR-ed combination of
+** zero or more [SQLITE_TRACE] constants.
+**
+** ^Each call to either sqlite3_trace() or sqlite3_trace_v2() overrides
+** (cancels) any prior calls to sqlite3_trace() or sqlite3_trace_v2().
+**
+** ^The X callback is invoked whenever any of the events identified by
+** mask M occur.  ^The integer return value from the callback is currently
+** ignored, though this may change in future releases.  Callback
+** implementations should return zero to ensure future compatibility.
+**
+** ^A trace callback is invoked with four arguments: callback(T,C,P,X).
+** ^The T argument is one of the [SQLITE_TRACE]
+** constants to indicate why the callback was invoked.
+** ^The C argument is a copy of the context pointer.
+** The P and X arguments are pointers whose meanings depend on T.
+**
+** The sqlite3_trace_v2() interface is intended to replace the legacy
+** interfaces [sqlite3_trace()] and [sqlite3_profile()], both of which
+** are deprecated.
+*/
+SQLITE_API int sqlite3_trace_v2(
+  sqlite3*,
+  unsigned uMask,
+  int(*xCallback)(unsigned,void*,void*,void*),
+  void *pCtx
+);
+
 /*
 ** CAPI3REF: Query Progress Callbacks
 ** METHOD: sqlite3
@@ -2746,7 +3052,7 @@ SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
 ** database connections for the meaning of "modify" in this paragraph.
 **
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
+SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
 
 /*
 ** CAPI3REF: Opening A New Database Connection
@@ -2836,10 +3142,10 @@ SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(vo
 ** ^If [URI filename] interpretation is enabled, and the filename argument
 ** begins with "file:", then the filename is interpreted as a URI. ^URI
 ** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
-** set in the fourth argument to sqlite3_open_v2(), or if it has
+** set in the third argument to sqlite3_open_v2(), or if it has
 ** been enabled globally using the [SQLITE_CONFIG_URI] option with the
 ** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
-** As of SQLite version 3.7.7, URI filename interpretation is turned off
+** URI filename interpretation is turned off
 ** by default, but future releases of SQLite might enable URI filename
 ** interpretation by default.  See "[URI filenames]" for additional
 ** information.
@@ -2975,15 +3281,15 @@ SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(vo
 **
 ** See also: [sqlite3_temp_directory]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
+SQLITE_API int sqlite3_open(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
+SQLITE_API int sqlite3_open16(
   const void *filename,   /* Database filename (UTF-16) */
   sqlite3 **ppDb          /* OUT: SQLite db handle */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
+SQLITE_API int sqlite3_open_v2(
   const char *filename,   /* Database filename (UTF-8) */
   sqlite3 **ppDb,         /* OUT: SQLite db handle */
   int flags,              /* Flags */
@@ -3029,9 +3335,9 @@ SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
 ** VFS method, then the behavior of this routine is undefined and probably
 ** undesirable.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
+SQLITE_API const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam);
+SQLITE_API int sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
+SQLITE_API sqlite3_int64 sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
 
 
 /*
@@ -3075,11 +3381,11 @@ SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const cha
 ** was invoked incorrectly by the application.  In that case, the
 ** error code and message may or may not be set.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
+SQLITE_API int sqlite3_errcode(sqlite3 *db);
+SQLITE_API int sqlite3_extended_errcode(sqlite3 *db);
+SQLITE_API const char *sqlite3_errmsg(sqlite3*);
+SQLITE_API const void *sqlite3_errmsg16(sqlite3*);
+SQLITE_API const char *sqlite3_errstr(int);
 
 /*
 ** CAPI3REF: Prepared Statement Object
@@ -3147,7 +3453,7 @@ typedef struct sqlite3_stmt sqlite3_stmt;
 **
 ** New run-time limit categories may be added in future releases.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
+SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal);
 
 /*
 ** CAPI3REF: Run-Time Limit Categories
@@ -3178,9 +3484,9 @@ SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
 **
 ** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt>
 ** <dd>The maximum number of instructions in a virtual machine program
-** used to implement an SQL statement.  This limit is not currently
-** enforced, though that might be added in some future release of
-** SQLite.</dd>)^
+** used to implement an SQL statement.  If [sqlite3_prepare_v2()] or
+** the equivalent tries to allocate space for more than this many opcodes
+** in a single prepared statement, an SQLITE_NOMEM error is returned.</dd>)^
 **
 ** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt>
 ** <dd>The maximum number of arguments on a function.</dd>)^
@@ -3218,23 +3524,59 @@ SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
 #define SQLITE_LIMIT_TRIGGER_DEPTH            10
 #define SQLITE_LIMIT_WORKER_THREADS           11
 
+/*
+** CAPI3REF: Prepare Flags
+**
+** These constants define various flags that can be passed into
+** "prepFlags" parameter of the [sqlite3_prepare_v3()] and
+** [sqlite3_prepare16_v3()] interfaces.
+**
+** New flags may be added in future releases of SQLite.
+**
+** <dl>
+** [[SQLITE_PREPARE_PERSISTENT]] ^(<dt>SQLITE_PREPARE_PERSISTENT</dt>
+** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner
+** that the prepared statement will be retained for a long time and
+** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()]
+** and [sqlite3_prepare16_v3()] assume that the prepared statement will
+** be used just once or at most a few times and then destroyed using
+** [sqlite3_finalize()] relatively soon. The current implementation acts
+** on this hint by avoiding the use of [lookaside memory] so as not to
+** deplete the limited store of lookaside memory. Future versions of
+** SQLite may act on this hint differently.
+** </dl>
+*/
+#define SQLITE_PREPARE_PERSISTENT              0x01
+
 /*
 ** CAPI3REF: Compiling An SQL Statement
 ** KEYWORDS: {SQL statement compiler}
 ** METHOD: sqlite3
 ** CONSTRUCTOR: sqlite3_stmt
 **
-** To execute an SQL query, it must first be compiled into a byte-code
-** program using one of these routines.
+** To execute an SQL statement, it must first be compiled into a byte-code
+** program using one of these routines.  Or, in other words, these routines
+** are constructors for the [prepared statement] object.
+**
+** The preferred routine to use is [sqlite3_prepare_v2()].  The
+** [sqlite3_prepare()] interface is legacy and should be avoided.
+** [sqlite3_prepare_v3()] has an extra "prepFlags" option that is used
+** for special purposes.
+**
+** The use of the UTF-8 interfaces is preferred, as SQLite currently
+** does all parsing using UTF-8.  The UTF-16 interfaces are provided
+** as a convenience.  The UTF-16 interfaces work by converting the
+** input text into UTF-8, then invoking the corresponding UTF-8 interface.
 **
 ** The first argument, "db", is a [database connection] obtained from a
 ** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
 ** [sqlite3_open16()].  The database connection must not have been closed.
 **
 ** The second argument, "zSql", is the statement to be compiled, encoded
-** as either UTF-8 or UTF-16.  The sqlite3_prepare() and sqlite3_prepare_v2()
-** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
-** use UTF-16.
+** as either UTF-8 or UTF-16.  The sqlite3_prepare(), sqlite3_prepare_v2(),
+** and sqlite3_prepare_v3()
+** interfaces use UTF-8, and sqlite3_prepare16(), sqlite3_prepare16_v2(),
+** and sqlite3_prepare16_v3() use UTF-16.
 **
 ** ^If the nByte argument is negative, then zSql is read up to the
 ** first zero terminator. ^If nByte is positive, then it is the
@@ -3261,10 +3603,11 @@ SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
 ** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
 ** otherwise an [error code] is returned.
 **
-** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
-** recommended for all new programs. The two older interfaces are retained
-** for backwards compatibility, but their use is discouraged.
-** ^In the "v2" interfaces, the prepared statement
+** The sqlite3_prepare_v2(), sqlite3_prepare_v3(), sqlite3_prepare16_v2(),
+** and sqlite3_prepare16_v3() interfaces are recommended for all new programs.
+** The older interfaces (sqlite3_prepare() and sqlite3_prepare16())
+** are retained for backwards compatibility, but their use is discouraged.
+** ^In the "vX" interfaces, the prepared statement
 ** that is returned (the [sqlite3_stmt] object) contains a copy of the
 ** original SQL text. This causes the [sqlite3_step()] interface to
 ** behave differently in three ways:
@@ -3297,46 +3640,93 @@ SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
 ** or [GLOB] operator or if the parameter is compared to an indexed column
 ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
 ** </li>
+**
+** <p>^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having
+** the extra prepFlags parameter, which is a bit array consisting of zero or
+** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags.  ^The
+** sqlite3_prepare_v2() interface works exactly the same as
+** sqlite3_prepare_v3() with a zero prepFlags parameter.
 ** </ol>
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
+SQLITE_API int sqlite3_prepare(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
+SQLITE_API int sqlite3_prepare_v2(
   sqlite3 *db,            /* Database handle */
   const char *zSql,       /* SQL statement, UTF-8 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const char **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
+SQLITE_API int sqlite3_prepare_v3(
+  sqlite3 *db,            /* Database handle */
+  const char *zSql,       /* SQL statement, UTF-8 encoded */
+  int nByte,              /* Maximum length of zSql in bytes. */
+  unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */
+  sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
+  const char **pzTail     /* OUT: Pointer to unused portion of zSql */
+);
+SQLITE_API int sqlite3_prepare16(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const void **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
+SQLITE_API int sqlite3_prepare16_v2(
   sqlite3 *db,            /* Database handle */
   const void *zSql,       /* SQL statement, UTF-16 encoded */
   int nByte,              /* Maximum length of zSql in bytes. */
   sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
   const void **pzTail     /* OUT: Pointer to unused portion of zSql */
 );
+SQLITE_API int sqlite3_prepare16_v3(
+  sqlite3 *db,            /* Database handle */
+  const void *zSql,       /* SQL statement, UTF-16 encoded */
+  int nByte,              /* Maximum length of zSql in bytes. */
+  unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */
+  sqlite3_stmt **ppStmt,  /* OUT: Statement handle */
+  const void **pzTail     /* OUT: Pointer to unused portion of zSql */
+);
 
 /*
 ** CAPI3REF: Retrieving Statement SQL
 ** METHOD: sqlite3_stmt
 **
-** ^This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
+** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8
+** SQL text used to create [prepared statement] P if P was
+** created by [sqlite3_prepare_v2()], [sqlite3_prepare_v3()],
+** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
+** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8
+** string containing the SQL text of prepared statement P with
+** [bound parameters] expanded.
+**
+** ^(For example, if a prepared statement is created using the SQL
+** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345
+** and parameter :xyz is unbound, then sqlite3_sql() will return
+** the original string, "SELECT $abc,:xyz" but sqlite3_expanded_sql()
+** will return "SELECT 2345,NULL".)^
+**
+** ^The sqlite3_expanded_sql() interface returns NULL if insufficient memory
+** is available to hold the result, or if the result would exceed the
+** the maximum string length determined by the [SQLITE_LIMIT_LENGTH].
+**
+** ^The [SQLITE_TRACE_SIZE_LIMIT] compile-time option limits the size of
+** bound parameter expansions.  ^The [SQLITE_OMIT_TRACE] compile-time
+** option causes sqlite3_expanded_sql() to always return NULL.
+**
+** ^The string returned by sqlite3_sql(P) is managed by SQLite and is
+** automatically freed when the prepared statement is finalized.
+** ^The string returned by sqlite3_expanded_sql(P), on the other hand,
+** is obtained from [sqlite3_malloc()] and must be free by the application
+** by passing it to [sqlite3_free()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt);
+SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If An SQL Statement Writes The Database
@@ -3367,8 +3757,12 @@ SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
 ** sqlite3_stmt_readonly() to return true since, while those statements
 ** change the configuration of a database connection, they do not make 
 ** changes to the content of the database files on disk.
+** ^The sqlite3_stmt_readonly() interface returns true for [BEGIN] since
+** [BEGIN] merely sets internal flags, but the [BEGIN|BEGIN IMMEDIATE] and
+** [BEGIN|BEGIN EXCLUSIVE] commands do touch the database and so
+** sqlite3_stmt_readonly() returns false for those commands.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Determine If A Prepared Statement Has Been Reset
@@ -3389,7 +3783,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
 ** for example, in diagnostic routines to search for prepared 
 ** statements that are holding a transaction open.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
+SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Dynamically Typed Value Object
@@ -3425,12 +3819,13 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
 ** implementation of [application-defined SQL functions] are protected.
 ** ^The sqlite3_value object returned by
 ** [sqlite3_column_value()] is unprotected.
-** Unprotected sqlite3_value objects may only be used with
-** [sqlite3_result_value()] and [sqlite3_bind_value()].
+** Unprotected sqlite3_value objects may only be used as arguments
+** to [sqlite3_result_value()], [sqlite3_bind_value()], and
+** [sqlite3_value_dup()].
 ** The [sqlite3_value_blob | sqlite3_value_type()] family of
 ** interfaces require protected sqlite3_value objects.
 */
-typedef struct Mem sqlite3_value;
+typedef struct sqlite3_value sqlite3_value;
 
 /*
 ** CAPI3REF: SQL Function Context Object
@@ -3532,6 +3927,15 @@ typedef struct sqlite3_context sqlite3_context;
 ** [sqlite3_blob_open | incremental BLOB I/O] routines.
 ** ^A negative value for the zeroblob results in a zero-length BLOB.
 **
+** ^The sqlite3_bind_pointer(S,I,P,T,D) routine causes the I-th parameter in
+** [prepared statement] S to have an SQL value of NULL, but to also be
+** associated with the pointer P of type T.  ^D is either a NULL pointer or
+** a pointer to a destructor function for P. ^SQLite will invoke the
+** destructor D with a single argument of P when it is finished using
+** P.  The T parameter should be a static string, preferably a string
+** literal. The sqlite3_bind_pointer() routine is part of the
+** [pointer passing interface] added for SQLite 3.20.0.
+**
 ** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
 ** for the [prepared statement] or with a prepared statement for which
 ** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
@@ -3553,20 +3957,21 @@ typedef struct sqlite3_context sqlite3_context;
 ** See also: [sqlite3_bind_parameter_count()],
 ** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
+SQLITE_API int sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
                         void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
+SQLITE_API int sqlite3_bind_double(sqlite3_stmt*, int, double);
+SQLITE_API int sqlite3_bind_int(sqlite3_stmt*, int, int);
+SQLITE_API int sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
+SQLITE_API int sqlite3_bind_null(sqlite3_stmt*, int);
+SQLITE_API int sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
+SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
+SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
                          void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
+SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
+SQLITE_API int sqlite3_bind_pointer(sqlite3_stmt*, int, void*, const char*,void(*)(void*));
+SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
+SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
 
 /*
 ** CAPI3REF: Number Of SQL Parameters
@@ -3587,7 +3992,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite
 ** [sqlite3_bind_parameter_name()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
+SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Name Of A Host Parameter
@@ -3608,14 +4013,14 @@ SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
 ** ^If the value N is out of range or if the N-th parameter is
 ** nameless, then NULL is returned.  ^The returned string is
 ** always in UTF-8 encoding even if the named parameter was
-** originally specified as UTF-16 in [sqlite3_prepare16()] or
-** [sqlite3_prepare16_v2()].
+** originally specified as UTF-16 in [sqlite3_prepare16()],
+** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()].
 **
 ** See also: [sqlite3_bind_blob|sqlite3_bind()],
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_index()].
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
+SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int);
 
 /*
 ** CAPI3REF: Index Of A Parameter With A Given Name
@@ -3626,13 +4031,14 @@ SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*,
 ** parameter to [sqlite3_bind_blob|sqlite3_bind()].  ^A zero
 ** is returned if no matching parameter is found.  ^The parameter
 ** name must be given in UTF-8 even if the original statement
-** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
+** was prepared from UTF-16 text using [sqlite3_prepare16_v2()] or
+** [sqlite3_prepare16_v3()].
 **
 ** See also: [sqlite3_bind_blob|sqlite3_bind()],
 ** [sqlite3_bind_parameter_count()], and
 ** [sqlite3_bind_parameter_name()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
+SQLITE_API int sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
 
 /*
 ** CAPI3REF: Reset All Bindings On A Prepared Statement
@@ -3642,19 +4048,23 @@ SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const
 ** the [sqlite3_bind_blob | bindings] on a [prepared statement].
 ** ^Use this routine to reset all host parameters to NULL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
+SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number Of Columns In A Result Set
 ** METHOD: sqlite3_stmt
 **
 ** ^Return the number of columns in the result set returned by the
-** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
-** statement that does not return data (for example an [UPDATE]).
+** [prepared statement]. ^If this routine returns 0, that means the
+** [prepared statement] returns no data (for example an [UPDATE]).
+** ^However, just because this routine returns a positive number does not
+** mean that one or more rows of data will be returned.  ^A SELECT statement
+** will always have a positive sqlite3_column_count() but depending on the
+** WHERE clause constraints and the table content, it might return no rows.
 **
 ** See also: [sqlite3_data_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_column_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Column Names In A Result Set
@@ -3683,8 +4093,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
 ** then the name of the column is unspecified and may change from
 ** one release of SQLite to the next.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
+SQLITE_API const char *sqlite3_column_name(sqlite3_stmt*, int N);
+SQLITE_API const void *sqlite3_column_name16(sqlite3_stmt*, int N);
 
 /*
 ** CAPI3REF: Source Of Data In A Query Result
@@ -3732,12 +4142,12 @@ SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N
 ** for the same [prepared statement] and result column
 ** at the same time then the results are undefined.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_database_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_database_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_table_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_table_name16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_origin_name(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_origin_name16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Declared Datatype Of A Query Result
@@ -3769,23 +4179,25 @@ SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*
 ** is associated with individual values, not with the containers
 ** used to hold those values.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
+SQLITE_API const char *sqlite3_column_decltype(sqlite3_stmt*,int);
+SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int);
 
 /*
 ** CAPI3REF: Evaluate An SQL Statement
 ** METHOD: sqlite3_stmt
 **
-** After a [prepared statement] has been prepared using either
-** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
+** After a [prepared statement] has been prepared using any of
+** [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], [sqlite3_prepare16_v2()],
+** or [sqlite3_prepare16_v3()] or one of the legacy
 ** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
 ** must be called one or more times to evaluate the statement.
 **
 ** The details of the behavior of the sqlite3_step() interface depend
-** on whether the statement was prepared using the newer "v2" interface
-** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
-** interface [sqlite3_prepare()] and [sqlite3_prepare16()].  The use of the
-** new "v2" interface is recommended for new applications but the legacy
+** on whether the statement was prepared using the newer "vX" interfaces
+** [sqlite3_prepare_v3()], [sqlite3_prepare_v2()], [sqlite3_prepare16_v3()],
+** [sqlite3_prepare16_v2()] or the older legacy
+** interfaces [sqlite3_prepare()] and [sqlite3_prepare16()].  The use of the
+** new "vX" interface is recommended for new applications but the legacy
 ** interface will continue to be supported.
 **
 ** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
@@ -3831,7 +4243,8 @@ SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,in
 ** other than [SQLITE_ROW] before any subsequent invocation of
 ** sqlite3_step().  Failure to reset the prepared statement using 
 ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step().  But after version 3.6.23.1, sqlite3_step() began
+** sqlite3_step().  But after [version 3.6.23.1] ([dateof:3.6.23.1],
+** sqlite3_step() began
 ** calling [sqlite3_reset()] automatically in this circumstance rather
 ** than returning [SQLITE_MISUSE].  This is not considered a compatibility
 ** break because any application that ever receives an SQLITE_MISUSE error
@@ -3845,12 +4258,13 @@ SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,in
 ** specific [error codes] that better describes the error.
 ** We admit that this is a goofy design.  The problem has been fixed
 ** with the "v2" interface.  If you prepare all of your SQL statements
-** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
+** using [sqlite3_prepare_v3()] or [sqlite3_prepare_v2()]
+** or [sqlite3_prepare16_v2()] or [sqlite3_prepare16_v3()] instead
 ** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
 ** then the more specific [error codes] are returned directly
-** by sqlite3_step().  The use of the "v2" interface is recommended.
+** by sqlite3_step().  The use of the "vX" interfaces is recommended.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
+SQLITE_API int sqlite3_step(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Number of columns in a result set
@@ -3871,7 +4285,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
 **
 ** See also: [sqlite3_column_count()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Fundamental Datatypes
@@ -3910,6 +4324,28 @@ SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
 ** KEYWORDS: {column access functions}
 ** METHOD: sqlite3_stmt
 **
+** <b>Summary:</b>
+** <blockquote><table border=0 cellpadding=0 cellspacing=0>
+** <tr><td><b>sqlite3_column_blob</b><td>&rarr;<td>BLOB result
+** <tr><td><b>sqlite3_column_double</b><td>&rarr;<td>REAL result
+** <tr><td><b>sqlite3_column_int</b><td>&rarr;<td>32-bit INTEGER result
+** <tr><td><b>sqlite3_column_int64</b><td>&rarr;<td>64-bit INTEGER result
+** <tr><td><b>sqlite3_column_text</b><td>&rarr;<td>UTF-8 TEXT result
+** <tr><td><b>sqlite3_column_text16</b><td>&rarr;<td>UTF-16 TEXT result
+** <tr><td><b>sqlite3_column_value</b><td>&rarr;<td>The result as an
+** [sqlite3_value|unprotected sqlite3_value] object.
+** <tr><td>&nbsp;<td>&nbsp;<td>&nbsp;
+** <tr><td><b>sqlite3_column_bytes</b><td>&rarr;<td>Size of a BLOB
+** or a UTF-8 TEXT result in bytes
+** <tr><td><b>sqlite3_column_bytes16&nbsp;&nbsp;</b>
+** <td>&rarr;&nbsp;&nbsp;<td>Size of UTF-16
+** TEXT in bytes
+** <tr><td><b>sqlite3_column_type</b><td>&rarr;<td>Default
+** datatype of the result
+** </table></blockquote>
+**
+** <b>Details:</b>
+**
 ** ^These routines return information about a single column of the current
 ** result row of a query.  ^In every case the first argument is a pointer
 ** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
@@ -3931,16 +4367,29 @@ SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
 ** are called from a different thread while any of these routines
 ** are pending, then the results are undefined.
 **
+** The first six interfaces (_blob, _double, _int, _int64, _text, and _text16)
+** each return the value of a result column in a specific data format.  If
+** the result column is not initially in the requested format (for example,
+** if the query returns an integer but the sqlite3_column_text() interface
+** is used to extract the value) then an automatic type conversion is performed.
+**
 ** ^The sqlite3_column_type() routine returns the
 ** [SQLITE_INTEGER | datatype code] for the initial data type
 ** of the result column.  ^The returned value is one of [SQLITE_INTEGER],
-** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].  The value
-** returned by sqlite3_column_type() is only meaningful if no type
-** conversions have occurred as described below.  After a type conversion,
-** the value returned by sqlite3_column_type() is undefined.  Future
+** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].
+** The return value of sqlite3_column_type() can be used to decide which
+** of the first six interface should be used to extract the column value.
+** The value returned by sqlite3_column_type() is only meaningful if no
+** automatic type conversions have occurred for the value in question.
+** After a type conversion, the result of calling sqlite3_column_type()
+** is undefined, though harmless.  Future
 ** versions of SQLite may change the behavior of sqlite3_column_type()
 ** following a type conversion.
 **
+** If the result is a BLOB or a TEXT string, then the sqlite3_column_bytes()
+** or sqlite3_column_bytes16() interfaces can be used to determine the size
+** of that BLOB or string.
+**
 ** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
 ** routine returns the number of bytes in that BLOB or string.
 ** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
@@ -3977,9 +4426,13 @@ SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
 ** [sqlite3_column_value()] is used in any other way, including calls
 ** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
 ** or [sqlite3_value_bytes()], the behavior is not threadsafe.
+** Hence, the sqlite3_column_value() interface
+** is normally only useful within the implementation of
+** [application-defined SQL functions] or [virtual tables], not within
+** top-level application code.
 **
-** These routines attempt to convert the value where appropriate.  ^For
-** example, if the internal representation is FLOAT and a text result
+** The these routines may attempt to convert the datatype of the result.
+** ^For example, if the internal representation is FLOAT and a text result
 ** is requested, [sqlite3_snprintf()] is used internally to perform the
 ** conversion automatically.  ^(The following table details the conversions
 ** that are applied:
@@ -4051,7 +4504,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
 ** ^The pointers returned are valid until a type conversion occurs as
 ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
 ** [sqlite3_finalize()] is called.  ^The memory space used to hold strings
-** and BLOBs is freed automatically.  Do <em>not</em> pass the pointers returned
+** and BLOBs is freed automatically.  Do not pass the pointers returned
 ** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
 ** [sqlite3_free()].
 **
@@ -4061,16 +4514,16 @@ SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
 ** pointer.  Subsequent calls to [sqlite3_errcode()] will return
 ** [SQLITE_NOMEM].)^
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol);
+SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol);
+SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol);
+SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol);
+SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
+SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol);
 
 /*
 ** CAPI3REF: Destroy A Prepared Statement Object
@@ -4098,7 +4551,7 @@ SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int
 ** statement after it has been finalized can result in undefined and
 ** undesirable behavior such as segfaults and heap corruption.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_finalize(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Reset A Prepared Statement Object
@@ -4125,7 +4578,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
 ** ^The [sqlite3_reset(S)] interface does not change the values
 ** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
+SQLITE_API int sqlite3_reset(sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Create Or Redefine SQL Functions
@@ -4225,7 +4678,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
 ** close the database connection nor finalize or reset the prepared
 ** statement in which the function is running.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
+SQLITE_API int sqlite3_create_function(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
@@ -4235,7 +4688,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
+SQLITE_API int sqlite3_create_function16(
   sqlite3 *db,
   const void *zFunctionName,
   int nArg,
@@ -4245,7 +4698,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
   void (*xStep)(sqlite3_context*,int,sqlite3_value**),
   void (*xFinal)(sqlite3_context*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
+SQLITE_API int sqlite3_create_function_v2(
   sqlite3 *db,
   const char *zFunctionName,
   int nArg,
@@ -4291,12 +4744,12 @@ SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
 ** these functions, we will not explain what they do.
 */
 #ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
+SQLITE_API SQLITE_DEPRECATED int sqlite3_aggregate_count(sqlite3_context*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_expired(sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_global_recover(void);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_thread_cleanup(void);
+SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
                       void*,sqlite3_int64);
 #endif
 
@@ -4304,21 +4757,40 @@ SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(voi
 ** CAPI3REF: Obtaining SQL Values
 ** METHOD: sqlite3_value
 **
-** The C-language implementation of SQL functions and aggregates uses
-** this set of interface routines to access the parameter values on
-** the function or aggregate.  
-**
-** The xFunc (for scalar functions) or xStep (for aggregates) parameters
-** to [sqlite3_create_function()] and [sqlite3_create_function16()]
-** define callbacks that implement the SQL functions and aggregates.
-** The 3rd parameter to these callbacks is an array of pointers to
-** [protected sqlite3_value] objects.  There is one [sqlite3_value] object for
-** each parameter to the SQL function.  These routines are used to
-** extract values from the [sqlite3_value] objects.
+** <b>Summary:</b>
+** <blockquote><table border=0 cellpadding=0 cellspacing=0>
+** <tr><td><b>sqlite3_value_blob</b><td>&rarr;<td>BLOB value
+** <tr><td><b>sqlite3_value_double</b><td>&rarr;<td>REAL value
+** <tr><td><b>sqlite3_value_int</b><td>&rarr;<td>32-bit INTEGER value
+** <tr><td><b>sqlite3_value_int64</b><td>&rarr;<td>64-bit INTEGER value
+** <tr><td><b>sqlite3_value_pointer</b><td>&rarr;<td>Pointer value
+** <tr><td><b>sqlite3_value_text</b><td>&rarr;<td>UTF-8 TEXT value
+** <tr><td><b>sqlite3_value_text16</b><td>&rarr;<td>UTF-16 TEXT value in
+** the native byteorder
+** <tr><td><b>sqlite3_value_text16be</b><td>&rarr;<td>UTF-16be TEXT value
+** <tr><td><b>sqlite3_value_text16le</b><td>&rarr;<td>UTF-16le TEXT value
+** <tr><td>&nbsp;<td>&nbsp;<td>&nbsp;
+** <tr><td><b>sqlite3_value_bytes</b><td>&rarr;<td>Size of a BLOB
+** or a UTF-8 TEXT in bytes
+** <tr><td><b>sqlite3_value_bytes16&nbsp;&nbsp;</b>
+** <td>&rarr;&nbsp;&nbsp;<td>Size of UTF-16
+** TEXT in bytes
+** <tr><td><b>sqlite3_value_type</b><td>&rarr;<td>Default
+** datatype of the value
+** <tr><td><b>sqlite3_value_numeric_type&nbsp;&nbsp;</b>
+** <td>&rarr;&nbsp;&nbsp;<td>Best numeric datatype of the value
+** </table></blockquote>
+**
+** <b>Details:</b>
+**
+** These routines extract type, size, and content information from
+** [protected sqlite3_value] objects.  Protected sqlite3_value objects
+** are used to pass parameter information into implementation of
+** [application-defined SQL functions] and [virtual tables].
 **
 ** These routines work only with [protected sqlite3_value] objects.
 ** Any attempt to use these routines on an [unprotected sqlite3_value]
-** object results in undefined behavior.
+** is not threadsafe.
 **
 ** ^These routines work just like the corresponding [column access functions]
 ** except that these routines take a single [protected sqlite3_value] object
@@ -4329,6 +4801,24 @@ SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(voi
 ** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
 ** extract UTF-16 strings as big-endian and little-endian respectively.
 **
+** ^If [sqlite3_value] object V was initialized
+** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)]
+** and if X and Y are strings that compare equal according to strcmp(X,Y),
+** then sqlite3_value_pointer(V,Y) will return the pointer P.  ^Otherwise,
+** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer()
+** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
+**
+** ^(The sqlite3_value_type(V) interface returns the
+** [SQLITE_INTEGER | datatype code] for the initial datatype of the
+** [sqlite3_value] object V. The returned value is one of [SQLITE_INTEGER],
+** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].)^
+** Other interfaces might change the datatype for an sqlite3_value object.
+** For example, if the datatype is initially SQLITE_INTEGER and
+** sqlite3_value_text(V) is called to extract a text value for that
+** integer, then subsequent calls to sqlite3_value_type(V) might return
+** SQLITE_TEXT.  Whether or not a persistent internal datatype conversion
+** occurs is undefined and may change from one release of SQLite to the next.
+**
 ** ^(The sqlite3_value_numeric_type() interface attempts to apply
 ** numeric affinity to the value.  This means that an attempt is
 ** made to convert the value to an integer or floating point.  If
@@ -4346,18 +4836,19 @@ SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(voi
 ** These routines must be called from the same thread as
 ** the SQL function that supplied the [sqlite3_value*] parameters.
 */
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_blob(sqlite3_value*);
+SQLITE_API double sqlite3_value_double(sqlite3_value*);
+SQLITE_API int sqlite3_value_int(sqlite3_value*);
+SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*);
+SQLITE_API void *sqlite3_value_pointer(sqlite3_value*, const char*);
+SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*);
+SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes(sqlite3_value*);
+SQLITE_API int sqlite3_value_bytes16(sqlite3_value*);
+SQLITE_API int sqlite3_value_type(sqlite3_value*);
+SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*);
 
 /*
 ** CAPI3REF: Finding The Subtype Of SQL Values
@@ -4368,12 +4859,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
 ** information can be used to pass a limited amount of context from
 ** one SQL function to another.  Use the [sqlite3_result_subtype()]
 ** routine to set the subtype for the return value of an SQL function.
-**
-** SQLite makes no use of subtype itself.  It merely passes the subtype
-** from the result of one [application-defined SQL function] into the
-** input of another.
 */
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
+SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*);
 
 /*
 ** CAPI3REF: Copy And Free SQL Values
@@ -4389,8 +4876,8 @@ SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
 ** previously obtained from [sqlite3_value_dup()].  ^If V is a NULL pointer
 ** then sqlite3_value_free(V) is a harmless no-op.
 */
-SQLITE_API SQLITE_EXPERIMENTAL sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
+SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value*);
+SQLITE_API void sqlite3_value_free(sqlite3_value*);
 
 /*
 ** CAPI3REF: Obtain Aggregate Function Context
@@ -4435,7 +4922,7 @@ SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_value_free(sqlite3_va
 ** This routine must be called from the same thread in which
 ** the aggregate SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
+SQLITE_API void *sqlite3_aggregate_context(sqlite3_context*, int nBytes);
 
 /*
 ** CAPI3REF: User Data For Functions
@@ -4450,7 +4937,7 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int
 ** This routine must be called from the same thread in which
 ** the application-defined function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
+SQLITE_API void *sqlite3_user_data(sqlite3_context*);
 
 /*
 ** CAPI3REF: Database Connection For Functions
@@ -4462,7 +4949,7 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
 ** and [sqlite3_create_function16()] routines that originally
 ** registered the application defined function.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
+SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*);
 
 /*
 ** CAPI3REF: Function Auxiliary Data
@@ -4479,10 +4966,11 @@ SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
 ** the compiled regular expression can be reused on multiple
 ** invocations of the same function.
 **
-** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
-** associated by the sqlite3_set_auxdata() function with the Nth argument
-** value to the application-defined function. ^If there is no metadata
-** associated with the function argument, this sqlite3_get_auxdata() interface
+** ^The sqlite3_get_auxdata(C,N) interface returns a pointer to the metadata
+** associated by the sqlite3_set_auxdata(C,N,P,X) function with the Nth argument
+** value to the application-defined function.  ^N is zero for the left-most
+** function argument.  ^If there is no metadata
+** associated with the function argument, the sqlite3_get_auxdata(C,N) interface
 ** returns a NULL pointer.
 **
 ** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
@@ -4494,12 +4982,13 @@ SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
 ** SQLite will invoke the destructor function X with parameter P exactly
 ** once, when the metadata is discarded.
 ** SQLite is free to discard the metadata at any time, including: <ul>
-** <li> when the corresponding function parameter changes, or
-** <li> when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
-**      SQL statement, or
-** <li> when sqlite3_set_auxdata() is invoked again on the same parameter, or
-** <li> during the original sqlite3_set_auxdata() call when a memory 
-**      allocation error occurs. </ul>)^
+** <li> ^(when the corresponding function parameter changes)^, or
+** <li> ^(when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
+**      SQL statement)^, or
+** <li> ^(when sqlite3_set_auxdata() is invoked again on the same
+**       parameter)^, or
+** <li> ^(during the original sqlite3_set_auxdata() call when a memory
+**      allocation error occurs.)^ </ul>
 **
 ** Note the last bullet in particular.  The destructor X in 
 ** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
@@ -4512,11 +5001,15 @@ SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
 ** function parameters that are compile-time constants, including literal
 ** values and [parameters] and expressions composed from the same.)^
 **
+** The value of the N parameter to these interfaces should be non-negative.
+** Future enhancements may make use of negative N values to define new
+** kinds of function caching behavior.
+**
 ** These routines must be called from the same thread in which
 ** the SQL function is running.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
+SQLITE_API void *sqlite3_get_auxdata(sqlite3_context*, int N);
+SQLITE_API void sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
 
 
 /*
@@ -4635,7 +5128,7 @@ typedef void (*sqlite3_destructor_type)(void*);
 ** when it has finished using that result.
 ** ^If the 4th parameter to the sqlite3_result_text* interfaces
 ** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
-** then SQLite makes a copy of the result into space obtained from
+** then SQLite makes a copy of the result into space obtained
 ** from [sqlite3_malloc()] before it returns.
 **
 ** ^The sqlite3_result_value() interface sets the result of
@@ -4648,31 +5141,43 @@ typedef void (*sqlite3_destructor_type)(void*);
 ** [unprotected sqlite3_value] object is required, so either
 ** kind of [sqlite3_value] object can be used with this interface.
 **
+** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an
+** SQL NULL value, just like [sqlite3_result_null(C)], except that it
+** also associates the host-language pointer P or type T with that
+** NULL value such that the pointer can be retrieved within an
+** [application-defined SQL function] using [sqlite3_value_pointer()].
+** ^If the D parameter is not NULL, then it is a pointer to a destructor
+** for the P parameter.  ^SQLite invokes D with P as its only argument
+** when SQLite is finished with P.  The T parameter should be a static
+** string and preferably a string literal. The sqlite3_result_pointer()
+** routine is part of the [pointer passing interface] added for SQLite 3.20.0.
+**
 ** If these routines are called from within the different thread
 ** than the one containing the application-defined function that received
 ** the [sqlite3_context] pointer, the results are undefined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
+SQLITE_API void sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_blob64(sqlite3_context*,const void*,
                            sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
+SQLITE_API void sqlite3_result_double(sqlite3_context*, double);
+SQLITE_API void sqlite3_result_error(sqlite3_context*, const char*, int);
+SQLITE_API void sqlite3_result_error16(sqlite3_context*, const void*, int);
+SQLITE_API void sqlite3_result_error_toobig(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_nomem(sqlite3_context*);
+SQLITE_API void sqlite3_result_error_code(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int(sqlite3_context*, int);
+SQLITE_API void sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
+SQLITE_API void sqlite3_result_null(sqlite3_context*);
+SQLITE_API void sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
                            void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
+SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
+SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
+SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*);
+SQLITE_API void sqlite3_result_pointer(sqlite3_context*, void*,const char*,void(*)(void*));
+SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n);
+SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
 
 
 /*
@@ -4687,7 +5192,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite
 ** The number of subtype bytes preserved by SQLite might increase
 ** in future releases of SQLite.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
+SQLITE_API void sqlite3_result_subtype(sqlite3_context*,unsigned int);
 
 /*
 ** CAPI3REF: Define New Collating Sequences
@@ -4769,14 +5274,14 @@ SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned
 **
 ** See also:  [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
+SQLITE_API int sqlite3_create_collation(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
   void *pArg,
   int(*xCompare)(void*,int,const void*,int,const void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
+SQLITE_API int sqlite3_create_collation_v2(
   sqlite3*, 
   const char *zName, 
   int eTextRep, 
@@ -4784,7 +5289,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
   int(*xCompare)(void*,int,const void*,int,const void*),
   void(*xDestroy)(void*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
+SQLITE_API int sqlite3_create_collation16(
   sqlite3*, 
   const void *zName,
   int eTextRep, 
@@ -4819,12 +5324,12 @@ SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
 ** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
 ** [sqlite3_create_collation_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
+SQLITE_API int sqlite3_collation_needed(
   sqlite3*, 
   void*, 
   void(*)(void*,sqlite3*,int eTextRep,const char*)
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
+SQLITE_API int sqlite3_collation_needed16(
   sqlite3*, 
   void*,
   void(*)(void*,sqlite3*,int eTextRep,const void*)
@@ -4838,11 +5343,11 @@ SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
+SQLITE_API int sqlite3_key(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
+SQLITE_API int sqlite3_key_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The key */
@@ -4856,11 +5361,11 @@ SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
 ** The code to implement this API is not available in the public release
 ** of SQLite.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
+SQLITE_API int sqlite3_rekey(
   sqlite3 *db,                   /* Database to be rekeyed */
   const void *pKey, int nKey     /* The new key */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
+SQLITE_API int sqlite3_rekey_v2(
   sqlite3 *db,                   /* Database to be rekeyed */
   const char *zDbName,           /* Name of the database */
   const void *pKey, int nKey     /* The new key */
@@ -4870,7 +5375,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
 ** Specify the activation key for a SEE database.  Unless 
 ** activated, none of the SEE routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
+SQLITE_API void sqlite3_activate_see(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
@@ -4880,7 +5385,7 @@ SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
 ** Specify the activation key for a CEROD database.  Unless 
 ** activated, none of the CEROD routines will work.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
+SQLITE_API void sqlite3_activate_cerod(
   const char *zPassPhrase        /* Activation phrase */
 );
 #endif
@@ -4902,7 +5407,7 @@ SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
 ** all, then the behavior of sqlite3_sleep() may deviate from the description
 ** in the previous paragraphs.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
+SQLITE_API int sqlite3_sleep(int);
 
 /*
 ** CAPI3REF: Name Of The Folder Holding Temporary Files
@@ -5021,7 +5526,7 @@ SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory;
 ** connection while this routine is running, then the return value
 ** is undefined.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
+SQLITE_API int sqlite3_get_autocommit(sqlite3*);
 
 /*
 ** CAPI3REF: Find The Database Handle Of A Prepared Statement
@@ -5034,7 +5539,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
 ** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
 ** create the statement in the first place.
 */
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
+SQLITE_API sqlite3 *sqlite3_db_handle(sqlite3_stmt*);
 
 /*
 ** CAPI3REF: Return The Filename For A Database Connection
@@ -5051,7 +5556,7 @@ SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
 ** will be an absolute pathname, even if the filename used
 ** to open the database originally was a URI or relative pathname.
 */
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
+SQLITE_API const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Determine if a database is read-only
@@ -5061,7 +5566,7 @@ SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const cha
 ** of connection D is read-only, 0 if it is read/write, or -1 if N is not
 ** the name of a database on connection D.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
+SQLITE_API int sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
 
 /*
 ** CAPI3REF: Find the next prepared statement
@@ -5077,7 +5582,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbNa
 ** [sqlite3_next_stmt(D,S)] must refer to an open database
 ** connection and in particular must not be a NULL pointer.
 */
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
+SQLITE_API sqlite3_stmt *sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
 
 /*
 ** CAPI3REF: Commit And Rollback Notification Callbacks
@@ -5126,8 +5631,8 @@ SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_
 **
 ** See also the [sqlite3_update_hook()] interface.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
+SQLITE_API void *sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
+SQLITE_API void *sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
 
 /*
 ** CAPI3REF: Data Change Notification Callbacks
@@ -5136,7 +5641,7 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *),
 ** ^The sqlite3_update_hook() interface registers a callback function
 ** with the [database connection] identified by the first argument
 ** to be invoked whenever a row is updated, inserted or deleted in
-** a rowid table.
+** a [rowid table].
 ** ^Any callback set by a previous call to this function
 ** for the same database connection is overridden.
 **
@@ -5157,7 +5662,7 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *),
 ** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
 **
 ** ^In the current implementation, the update hook
-** is not invoked when duplication rows are deleted because of an
+** is not invoked when conflicting rows are deleted because of an
 ** [ON CONFLICT | ON CONFLICT REPLACE] clause.  ^Nor is the update hook
 ** invoked when rows are deleted using the [truncate optimization].
 ** The exceptions defined in this paragraph might change in a future
@@ -5175,10 +5680,10 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *),
 ** on the same [database connection] D, or NULL for
 ** the first call on D.
 **
-** See also the [sqlite3_commit_hook()] and [sqlite3_rollback_hook()]
-** interfaces.
+** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
+** and [sqlite3_preupdate_hook()] interfaces.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
+SQLITE_API void *sqlite3_update_hook(
   sqlite3*, 
   void(*)(void *,int ,char const *,char const *,sqlite3_int64),
   void*
@@ -5193,7 +5698,8 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
 ** and disabled if the argument is false.)^
 **
 ** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
+** This is a change as of SQLite [version 3.5.0] ([dateof:3.5.0]).
+** In prior versions of SQLite,
 ** sharing was enabled or disabled for each thread separately.
 **
 ** ^(The cache sharing mode set by this interface effects all subsequent
@@ -5218,7 +5724,7 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
 **
 ** See Also:  [SQLite Shared-Cache Mode]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
+SQLITE_API int sqlite3_enable_shared_cache(int);
 
 /*
 ** CAPI3REF: Attempt To Free Heap Memory
@@ -5234,7 +5740,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
 **
 ** See also: [sqlite3_db_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
+SQLITE_API int sqlite3_release_memory(int);
 
 /*
 ** CAPI3REF: Free Memory Used By A Database Connection
@@ -5248,7 +5754,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
 **
 ** See also: [sqlite3_release_memory()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
+SQLITE_API int sqlite3_db_release_memory(sqlite3*);
 
 /*
 ** CAPI3REF: Impose A Limit On Heap Size
@@ -5287,7 +5793,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
 **      from the heap.
 ** </ul>)^
 **
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
+** Beginning with SQLite [version 3.7.3] ([dateof:3.7.3]),
+** the soft heap limit is enforced
 ** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
 ** compile-time option is invoked.  With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
 ** the soft heap limit is enforced on every memory allocation.  Without
@@ -5300,7 +5807,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
 ** The circumstances under which SQLite will enforce the soft heap limit may
 ** changes in future releases of SQLite.
 */
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
+SQLITE_API sqlite3_int64 sqlite3_soft_heap_limit64(sqlite3_int64 N);
 
 /*
 ** CAPI3REF: Deprecated Soft Heap Limit Interface
@@ -5311,7 +5818,7 @@ SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64
 ** only.  All new applications should use the
 ** [sqlite3_soft_heap_limit64()] interface rather than this one.
 */
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
+SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N);
 
 
 /*
@@ -5326,9 +5833,11 @@ SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
 ** column exists.  ^The sqlite3_table_column_metadata() interface returns
 ** SQLITE_ERROR and if the specified column does not exist.
 ** ^If the column-name parameter to sqlite3_table_column_metadata() is a
-** NULL pointer, then this routine simply checks for the existance of the
+** NULL pointer, then this routine simply checks for the existence of the
 ** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
-** does not.
+** does not.  If the table name parameter T in a call to
+** sqlite3_table_column_metadata(X,D,T,C,...) is NULL then the result is
+** undefined behavior.
 **
 ** ^The column is identified by the second, third and fourth parameters to
 ** this function. ^(The second parameter is either the name of the database
@@ -5381,7 +5890,7 @@ SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
 ** parsed, if that has not already been done, and returns an error if
 ** any errors are encountered while loading the schema.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
+SQLITE_API int sqlite3_table_column_metadata(
   sqlite3 *db,                /* Connection handle */
   const char *zDbName,        /* Database name or NULL */
   const char *zTableName,     /* Table name */
@@ -5423,12 +5932,21 @@ SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
 ** should free this memory by calling [sqlite3_free()].
 **
 ** ^Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] prior to calling this API,
+** [sqlite3_enable_load_extension()] or
+** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
+** prior to calling this API,
 ** otherwise an error will be returned.
 **
+** <b>Security warning:</b> It is recommended that the
+** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
+** interface.  The use of the [sqlite3_enable_load_extension()] interface
+** should be avoided.  This will keep the SQL function [load_extension()]
+** disabled and prevent SQL injections from giving attackers
+** access to extension loading capabilities.
+**
 ** See also the [load_extension() SQL function].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
+SQLITE_API int sqlite3_load_extension(
   sqlite3 *db,          /* Load the extension into this database connection */
   const char *zFile,    /* Name of the shared library containing extension */
   const char *zProc,    /* Entry point.  Derived from zFile if 0 */
@@ -5448,8 +5966,19 @@ SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
 ** ^Call the sqlite3_enable_load_extension() routine with onoff==1
 ** to turn extension loading on and call it with onoff==0 to turn
 ** it back off again.
+**
+** ^This interface enables or disables both the C-API
+** [sqlite3_load_extension()] and the SQL function [load_extension()].
+** ^(Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
+** to enable or disable only the C-API.)^
+**
+** <b>Security warning:</b> It is recommended that extension loading
+** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
+** rather than this interface, so the [load_extension()] SQL function
+** remains disabled. This will prevent SQL injections from giving attackers
+** access to extension loading capabilities.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
+SQLITE_API int sqlite3_enable_load_extension(sqlite3 *db, int onoff);
 
 /*
 ** CAPI3REF: Automatically Load Statically Linked Extensions
@@ -5461,7 +5990,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int ono
 **
 ** ^(Even though the function prototype shows that xEntryPoint() takes
 ** no arguments and returns void, SQLite invokes xEntryPoint() with three
-** arguments and expects and integer result as if the signature of the
+** arguments and expects an integer result as if the signature of the
 ** entry point where as follows:
 **
 ** <blockquote><pre>
@@ -5487,7 +6016,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int ono
 ** See also: [sqlite3_reset_auto_extension()]
 ** and [sqlite3_cancel_auto_extension()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Cancel Automatic Extension Loading
@@ -5499,7 +6028,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));
 ** unregistered and it returns 0 if X was not on the list of initialization
 ** routines.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
+SQLITE_API int sqlite3_cancel_auto_extension(void(*xEntryPoint)(void));
 
 /*
 ** CAPI3REF: Reset Automatic Extension Loading
@@ -5507,7 +6036,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(
 ** ^This interface disables all automatic extensions previously
 ** registered using [sqlite3_auto_extension()].
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
+SQLITE_API void sqlite3_reset_auto_extension(void);
 
 /*
 ** The interface to the virtual-table mechanism is currently considered
@@ -5609,6 +6138,17 @@ struct sqlite3_module {
 ** ^Information about the ORDER BY clause is stored in aOrderBy[].
 ** ^Each term of aOrderBy records a column of the ORDER BY clause.
 **
+** The colUsed field indicates which columns of the virtual table may be
+** required by the current scan. Virtual table columns are numbered from
+** zero in the order in which they appear within the CREATE TABLE statement
+** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
+** the corresponding bit is set within the colUsed mask if the column may be
+** required by SQLite. If the table has at least 64 columns and any column
+** to the right of the first 63 is required, then bit 63 of colUsed is also
+** set. In other words, column iCol may be required if the expression
+** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
+** non-zero.
+**
 ** The [xBestIndex] method must fill aConstraintUsage[] with information
 ** about what parameters to pass to xFilter.  ^If argvIndex>0 then
 ** the right-hand side of the corresponding aConstraint[] is evaluated
@@ -5650,13 +6190,15 @@ struct sqlite3_module {
 ** the xUpdate method are automatically rolled back by SQLite.
 **
 ** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
+** structure for SQLite [version 3.8.2] ([dateof:3.8.2]).
+** If a virtual table extension is
 ** used with an SQLite version earlier than 3.8.2, the results of attempting 
 ** to read or write the estimatedRows field are undefined (but are likely 
 ** to included crashing the application). The estimatedRows field should
 ** therefore only be used if [sqlite3_libversion_number()] returns a
 ** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
+** was added for [version 3.9.0] ([dateof:3.9.0]).
+** It may therefore only be used if
 ** sqlite3_libversion_number() returns a value greater than or equal to
 ** 3009000.
 */
@@ -5664,7 +6206,7 @@ struct sqlite3_index_info {
   /* Inputs */
   int nConstraint;           /* Number of entries in aConstraint */
   struct sqlite3_index_constraint {
-     int iColumn;              /* Column on left-hand side of constraint */
+     int iColumn;              /* Column constrained.  -1 for ROWID */
      unsigned char op;         /* Constraint operator */
      unsigned char usable;     /* True if this constraint is usable */
      int iTermOffset;          /* Used internally - xBestIndex should ignore */
@@ -5688,6 +6230,8 @@ struct sqlite3_index_info {
   sqlite3_int64 estimatedRows;    /* Estimated number of rows returned */
   /* Fields below are only available in SQLite 3.9.0 and later */
   int idxFlags;              /* Mask of SQLITE_INDEX_SCAN_* flags */
+  /* Fields below are only available in SQLite 3.10.0 and later */
+  sqlite3_uint64 colUsed;    /* Input: Mask of columns used by statement */
 };
 
 /*
@@ -5703,12 +6247,20 @@ struct sqlite3_index_info {
 ** an operator that is part of a constraint term in the wHERE clause of
 ** a query that uses a [virtual table].
 */
-#define SQLITE_INDEX_CONSTRAINT_EQ    2
-#define SQLITE_INDEX_CONSTRAINT_GT    4
-#define SQLITE_INDEX_CONSTRAINT_LE    8
-#define SQLITE_INDEX_CONSTRAINT_LT    16
-#define SQLITE_INDEX_CONSTRAINT_GE    32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
+#define SQLITE_INDEX_CONSTRAINT_EQ         2
+#define SQLITE_INDEX_CONSTRAINT_GT         4
+#define SQLITE_INDEX_CONSTRAINT_LE         8
+#define SQLITE_INDEX_CONSTRAINT_LT        16
+#define SQLITE_INDEX_CONSTRAINT_GE        32
+#define SQLITE_INDEX_CONSTRAINT_MATCH     64
+#define SQLITE_INDEX_CONSTRAINT_LIKE      65
+#define SQLITE_INDEX_CONSTRAINT_GLOB      66
+#define SQLITE_INDEX_CONSTRAINT_REGEXP    67
+#define SQLITE_INDEX_CONSTRAINT_NE        68
+#define SQLITE_INDEX_CONSTRAINT_ISNOT     69
+#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70
+#define SQLITE_INDEX_CONSTRAINT_ISNULL    71
+#define SQLITE_INDEX_CONSTRAINT_IS        72
 
 /*
 ** CAPI3REF: Register A Virtual Table Implementation
@@ -5736,13 +6288,13 @@ struct sqlite3_index_info {
 ** interface is equivalent to sqlite3_create_module_v2() with a NULL
 ** destructor.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
+SQLITE_API int sqlite3_create_module(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
   void *pClientData          /* Client data for xCreate/xConnect */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
+SQLITE_API int sqlite3_create_module_v2(
   sqlite3 *db,               /* SQLite connection to register module with */
   const char *zName,         /* Name of the module */
   const sqlite3_module *p,   /* Methods for the module */
@@ -5805,7 +6357,7 @@ struct sqlite3_vtab_cursor {
 ** to declare the format (the names and datatypes of the columns) of
 ** the virtual tables they implement.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
+SQLITE_API int sqlite3_declare_vtab(sqlite3*, const char *zSQL);
 
 /*
 ** CAPI3REF: Overload A Function For A Virtual Table
@@ -5824,7 +6376,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
 ** purpose is to be a placeholder function that can be overloaded
 ** by a [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
+SQLITE_API int sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
 
 /*
 ** The interface to the virtual-table mechanism defined above (back up
@@ -5899,6 +6451,12 @@ typedef struct sqlite3_blob sqlite3_blob;
 ** [database connection] error code and message accessible via 
 ** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions. 
 **
+** A BLOB referenced by sqlite3_blob_open() may be read using the
+** [sqlite3_blob_read()] interface and modified by using
+** [sqlite3_blob_write()].  The [BLOB handle] can be moved to a
+** different row of the same table using the [sqlite3_blob_reopen()]
+** interface.  However, the column, table, or database of a [BLOB handle]
+** cannot be changed after the [BLOB handle] is opened.
 **
 ** ^(If the row that a BLOB handle points to is modified by an
 ** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
@@ -5922,8 +6480,12 @@ typedef struct sqlite3_blob sqlite3_blob;
 **
 ** To avoid a resource leak, every open [BLOB handle] should eventually
 ** be released by a call to [sqlite3_blob_close()].
+**
+** See also: [sqlite3_blob_close()],
+** [sqlite3_blob_reopen()], [sqlite3_blob_read()],
+** [sqlite3_blob_bytes()], [sqlite3_blob_write()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
+SQLITE_API int sqlite3_blob_open(
   sqlite3*,
   const char *zDb,
   const char *zTable,
@@ -5937,11 +6499,11 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
 ** CAPI3REF: Move a BLOB Handle to a New Row
 ** METHOD: sqlite3_blob
 **
-** ^This function is used to move an existing blob handle so that it points
+** ^This function is used to move an existing [BLOB handle] so that it points
 ** to a different row of the same database table. ^The new row is identified
 ** by the rowid value passed as the second argument. Only the row can be
 ** changed. ^The database, table and column on which the blob handle is open
-** remain the same. Moving an existing blob handle to a new row can be
+** remain the same. Moving an existing [BLOB handle] to a new row is
 ** faster than closing the existing handle and opening a new one.
 **
 ** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
@@ -5956,7 +6518,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
 **
 ** ^This function sets the database handle error code and message.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
+SQLITE_API int sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
 
 /*
 ** CAPI3REF: Close A BLOB Handle
@@ -5979,7 +6541,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64)
 ** is passed a valid open blob handle, the values returned by the 
 ** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_close(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Return The Size Of An Open BLOB
@@ -5995,7 +6557,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
 ** been closed by [sqlite3_blob_close()].  Passing any other pointer in
 ** to this routine results in undefined and probably undesirable behavior.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
+SQLITE_API int sqlite3_blob_bytes(sqlite3_blob *);
 
 /*
 ** CAPI3REF: Read Data From A BLOB Incrementally
@@ -6024,7 +6586,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
 **
 ** See also: [sqlite3_blob_write()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
+SQLITE_API int sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
 
 /*
 ** CAPI3REF: Write Data Into A BLOB Incrementally
@@ -6066,7 +6628,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N,
 **
 ** See also: [sqlite3_blob_read()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
+SQLITE_API int sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
 
 /*
 ** CAPI3REF: Virtual File System Objects
@@ -6097,9 +6659,9 @@ SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z,
 ** ^(If the default VFS is unregistered, another VFS is chosen as
 ** the default.  The choice for the new VFS is arbitrary.)^
 */
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
+SQLITE_API sqlite3_vfs *sqlite3_vfs_find(const char *zVfsName);
+SQLITE_API int sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
+SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs*);
 
 /*
 ** CAPI3REF: Mutexes
@@ -6215,11 +6777,11 @@ SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
 **
 ** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
+SQLITE_API sqlite3_mutex *sqlite3_mutex_alloc(int);
+SQLITE_API void sqlite3_mutex_free(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_enter(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_try(sqlite3_mutex*);
+SQLITE_API void sqlite3_mutex_leave(sqlite3_mutex*);
 
 /*
 ** CAPI3REF: Mutex Methods Object
@@ -6329,8 +6891,8 @@ struct sqlite3_mutex_methods {
 ** interface should also return 1 when given a NULL pointer.
 */
 #ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_held(sqlite3_mutex*);
+SQLITE_API int sqlite3_mutex_notheld(sqlite3_mutex*);
 #endif
 
 /*
@@ -6349,7 +6911,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
 #define SQLITE_MUTEX_STATIC_MEM       3  /* sqlite3_malloc() */
 #define SQLITE_MUTEX_STATIC_MEM2      4  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_OPEN      4  /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_random() */
+#define SQLITE_MUTEX_STATIC_PRNG      5  /* sqlite3_randomness() */
 #define SQLITE_MUTEX_STATIC_LRU       6  /* lru page list */
 #define SQLITE_MUTEX_STATIC_LRU2      7  /* NOT USED */
 #define SQLITE_MUTEX_STATIC_PMEM      7  /* sqlite3PageMalloc() */
@@ -6370,7 +6932,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
 ** ^If the [threading mode] is Single-thread or Multi-thread then this
 ** routine returns a NULL pointer.
 */
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
+SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*);
 
 /*
 ** CAPI3REF: Low-Level Control Of Database Files
@@ -6405,7 +6967,7 @@ SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
 **
 ** See also: [SQLITE_FCNTL_LOCKSTATE]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
+SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
 
 /*
 ** CAPI3REF: Testing Interface
@@ -6424,7 +6986,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName
 ** Unlike most of the SQLite API, this function is not guaranteed to
 ** operate consistently from one release to the next.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
+SQLITE_API int sqlite3_test_control(int op, ...);
 
 /*
 ** CAPI3REF: Testing Interface Operation Codes
@@ -6450,9 +7012,10 @@ SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
 #define SQLITE_TESTCTRL_RESERVE                 14
 #define SQLITE_TESTCTRL_OPTIMIZATIONS           15
 #define SQLITE_TESTCTRL_ISKEYWORD               16
-#define SQLITE_TESTCTRL_SCRATCHMALLOC           17
+#define SQLITE_TESTCTRL_SCRATCHMALLOC           17  /* NOT USED */
 #define SQLITE_TESTCTRL_LOCALTIME_FAULT         18
 #define SQLITE_TESTCTRL_EXPLAIN_STMT            19  /* NOT USED */
+#define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD    19
 #define SQLITE_TESTCTRL_NEVER_CORRUPT           20
 #define SQLITE_TESTCTRL_VDBE_COVERAGE           21
 #define SQLITE_TESTCTRL_BYTEORDER               22
@@ -6487,8 +7050,8 @@ SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
 **
 ** See also: [sqlite3_db_status()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
+SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
+SQLITE_API int sqlite3_status64(
   int op,
   sqlite3_int64 *pCurrent,
   sqlite3_int64 *pHighwater,
@@ -6508,8 +7071,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_status64(
 ** <dd>This parameter is the current amount of memory checked out
 ** using [sqlite3_malloc()], either directly or indirectly.  The
 ** figure includes calls made to [sqlite3_malloc()] by the application
-** and internal memory usage by the SQLite library.  Scratch memory
-** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
+** and internal memory usage by the SQLite library.  Auxiliary page-cache
 ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
 ** this parameter.  The amount returned is the sum of the allocation
 ** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^
@@ -6544,35 +7106,21 @@ SQLITE_API int SQLITE_STDCALL sqlite3_status64(
 ** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(<dt>SQLITE_STATUS_PAGECACHE_SIZE</dt>
 ** <dd>This parameter records the largest memory allocation request
 ** handed to [pagecache memory allocator].  Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.  
+** *pHighwater parameter to [sqlite3_status()] is of interest.
 ** The value written into the *pCurrent parameter is undefined.</dd>)^
 **
-** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt>
-** <dd>This parameter returns the number of allocations used out of the
-** [scratch memory allocator] configured using
-** [SQLITE_CONFIG_SCRATCH].  The value returned is in allocations, not
-** in bytes.  Since a single thread may only have one scratch allocation
-** outstanding at time, this parameter also reports the number of threads
-** using scratch memory at the same time.</dd>)^
+** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt>
+** <dd>No longer used.</dd>
 **
 ** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt>
-** <dd>This parameter returns the number of bytes of scratch memory
-** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
-** buffer and where forced to overflow to [sqlite3_malloc()].  The values
-** returned include overflows because the requested allocation was too
-** larger (that is, because the requested allocation was larger than the
-** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
-** slots were available.
-** </dd>)^
-**
-** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
-** <dd>This parameter records the largest memory allocation request
-** handed to [scratch memory allocator].  Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.  
-** The value written into the *pCurrent parameter is undefined.</dd>)^
+** <dd>No longer used.</dd>
+**
+** [[SQLITE_STATUS_SCRATCH_SIZE]] <dt>SQLITE_STATUS_SCRATCH_SIZE</dt>
+** <dd>No longer used.</dd>
 **
 ** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt>
-** <dd>This parameter records the deepest parser stack.  It is only
+** <dd>The *pHighwater parameter records the deepest parser stack.
+** The *pCurrent value is undefined.  The *pHighwater value is only
 ** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].</dd>)^
 ** </dl>
 **
@@ -6581,12 +7129,12 @@ SQLITE_API int SQLITE_STDCALL sqlite3_status64(
 #define SQLITE_STATUS_MEMORY_USED          0
 #define SQLITE_STATUS_PAGECACHE_USED       1
 #define SQLITE_STATUS_PAGECACHE_OVERFLOW   2
-#define SQLITE_STATUS_SCRATCH_USED         3
-#define SQLITE_STATUS_SCRATCH_OVERFLOW     4
+#define SQLITE_STATUS_SCRATCH_USED         3  /* NOT USED */
+#define SQLITE_STATUS_SCRATCH_OVERFLOW     4  /* NOT USED */
 #define SQLITE_STATUS_MALLOC_SIZE          5
 #define SQLITE_STATUS_PARSER_STACK         6
 #define SQLITE_STATUS_PAGECACHE_SIZE       7
-#define SQLITE_STATUS_SCRATCH_SIZE         8
+#define SQLITE_STATUS_SCRATCH_SIZE         8  /* NOT USED */
 #define SQLITE_STATUS_MALLOC_COUNT         9
 
 /*
@@ -6612,7 +7160,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_status64(
 **
 ** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
+SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for database connections
@@ -6658,6 +7206,18 @@ SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int
 ** memory used by all pager caches associated with the database connection.)^
 ** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
 **
+** [[SQLITE_DBSTATUS_CACHE_USED_SHARED]]
+** ^(<dt>SQLITE_DBSTATUS_CACHE_USED_SHARED</dt>
+** <dd>This parameter is similar to DBSTATUS_CACHE_USED, except that if a
+** pager cache is shared between two or more connections the bytes of heap
+** memory used by that pager cache is divided evenly between the attached
+** connections.)^  In other words, if none of the pager caches associated
+** with the database connection are shared, this request returns the same
+** value as DBSTATUS_CACHE_USED. Or, if one or more or the pager caches are
+** shared, the value returned by this call will be smaller than that returned
+** by DBSTATUS_CACHE_USED. ^The highwater mark associated with
+** SQLITE_DBSTATUS_CACHE_USED_SHARED is always 0.
+**
 ** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(<dt>SQLITE_DBSTATUS_SCHEMA_USED</dt>
 ** <dd>This parameter returns the approximate number of bytes of heap
 ** memory used to store the schema for all databases associated
@@ -6715,7 +7275,8 @@ SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int
 #define SQLITE_DBSTATUS_CACHE_MISS           8
 #define SQLITE_DBSTATUS_CACHE_WRITE          9
 #define SQLITE_DBSTATUS_DEFERRED_FKS        10
-#define SQLITE_DBSTATUS_MAX                 10   /* Largest defined DBSTATUS */
+#define SQLITE_DBSTATUS_CACHE_USED_SHARED   11
+#define SQLITE_DBSTATUS_MAX                 11   /* Largest defined DBSTATUS */
 
 
 /*
@@ -6742,7 +7303,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int
 **
 ** See also: [sqlite3_status()] and [sqlite3_db_status()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
+SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
 
 /*
 ** CAPI3REF: Status Parameters for prepared statements
@@ -6778,6 +7339,24 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int rese
 ** used as a proxy for the total work done by the prepared statement.
 ** If the number of virtual machine operations exceeds 2147483647
 ** then the value returned by this statement status code is undefined.
+**
+** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt>
+** <dd>^This is the number of times that the prepare statement has been
+** automatically regenerated due to schema changes or change to
+** [bound parameters] that might affect the query plan.
+**
+** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt>
+** <dd>^This is the number of times that the prepared statement has
+** been run.  A single "run" for the purposes of this counter is one
+** or more calls to [sqlite3_step()] followed by a call to [sqlite3_reset()].
+** The counter is incremented on the first [sqlite3_step()] call of each
+** cycle.
+**
+** [[SQLITE_STMTSTATUS_MEMUSED]] <dt>SQLITE_STMTSTATUS_MEMUSED</dt>
+** <dd>^This is the approximate number of bytes of heap memory
+** used to store the prepared statement.  ^This value is not actually
+** a counter, and so the resetFlg parameter to sqlite3_stmt_status()
+** is ignored when the opcode is SQLITE_STMTSTATUS_MEMUSED.
 ** </dd>
 ** </dl>
 */
@@ -6785,6 +7364,9 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int rese
 #define SQLITE_STMTSTATUS_SORT              2
 #define SQLITE_STMTSTATUS_AUTOINDEX         3
 #define SQLITE_STMTSTATUS_VM_STEP           4
+#define SQLITE_STMTSTATUS_REPREPARE         5
+#define SQLITE_STMTSTATUS_RUN               6
+#define SQLITE_STMTSTATUS_MEMUSED           99
 
 /*
 ** CAPI3REF: Custom Page Cache Object
@@ -7069,7 +7651,7 @@ typedef struct sqlite3_backup sqlite3_backup;
 ** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
 ** an error.
 **
-** ^A call to sqlite3_backup_init() will fail, returning SQLITE_ERROR, if 
+** ^A call to sqlite3_backup_init() will fail, returning NULL, if
 ** there is already a read or read-write transaction open on the 
 ** destination database.
 **
@@ -7211,16 +7793,16 @@ typedef struct sqlite3_backup sqlite3_backup;
 ** same time as another thread is invoking sqlite3_backup_step() it is
 ** possible that they return invalid values.
 */
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
+SQLITE_API sqlite3_backup *sqlite3_backup_init(
   sqlite3 *pDest,                        /* Destination database handle */
   const char *zDestName,                 /* Destination database name */
   sqlite3 *pSource,                      /* Source database handle */
   const char *zSourceName                /* Source database name */
 );
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_step(sqlite3_backup *p, int nPage);
+SQLITE_API int sqlite3_backup_finish(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_remaining(sqlite3_backup *p);
+SQLITE_API int sqlite3_backup_pagecount(sqlite3_backup *p);
 
 /*
 ** CAPI3REF: Unlock Notification
@@ -7337,7 +7919,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
 ** the special "DROP TABLE/INDEX" case, the extended error code is just 
 ** SQLITE_LOCKED.)^
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
+SQLITE_API int sqlite3_unlock_notify(
   sqlite3 *pBlocked,                          /* Waiting connection */
   void (*xNotify)(void **apArg, int nArg),    /* Callback function to invoke */
   void *pNotifyArg                            /* Argument to pass to xNotify */
@@ -7352,23 +7934,48 @@ SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
 ** strings in a case-independent fashion, using the same definition of "case
 ** independence" that SQLite uses internally when comparing identifiers.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
+SQLITE_API int sqlite3_stricmp(const char *, const char *);
+SQLITE_API int sqlite3_strnicmp(const char *, const char *, int);
 
 /*
 ** CAPI3REF: String Globbing
 *
-** ^The [sqlite3_strglob(P,X)] interface returns zero if string X matches
-** the glob pattern P, and it returns non-zero if string X does not match
-** the glob pattern P.  ^The definition of glob pattern matching used in
+** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
+** string X matches the [GLOB] pattern P.
+** ^The definition of [GLOB] pattern matching used in
 ** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
-** SQL dialect used by SQLite.  ^The sqlite3_strglob(P,X) function is case
-** sensitive.
+** SQL dialect understood by SQLite.  ^The [sqlite3_strglob(P,X)] function
+** is case sensitive.
 **
 ** Note that this routine returns zero on a match and non-zero if the strings
 ** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strlike()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
+SQLITE_API int sqlite3_strglob(const char *zGlob, const char *zStr);
+
+/*
+** CAPI3REF: String LIKE Matching
+*
+** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
+** string X matches the [LIKE] pattern P with escape character E.
+** ^The definition of [LIKE] pattern matching used in
+** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
+** operator in the SQL dialect understood by SQLite.  ^For "X LIKE P" without
+** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
+** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
+** insensitive - equivalent upper and lower case ASCII characters match
+** one another.
+**
+** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
+** only ASCII characters are case folded.
+**
+** Note that this routine returns zero on a match and non-zero if the strings
+** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
+**
+** See also: [sqlite3_strglob()].
+*/
+SQLITE_API int sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
 
 /*
 ** CAPI3REF: Error Logging Interface
@@ -7391,7 +7998,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zSt
 ** a few hundred characters, it will be truncated to the length of the
 ** buffer.
 */
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
+SQLITE_API void sqlite3_log(int iErrCode, const char *zFormat, ...);
 
 /*
 ** CAPI3REF: Write-Ahead Log Commit Hook
@@ -7425,9 +8032,9 @@ SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...)
 ** previously registered write-ahead log callback. ^Note that the
 ** [sqlite3_wal_autocheckpoint()] interface and the
 ** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
-** those overwrite any prior [sqlite3_wal_hook()] settings.
+** overwrite any prior [sqlite3_wal_hook()] settings.
 */
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
+SQLITE_API void *sqlite3_wal_hook(
   sqlite3*, 
   int(*)(void *,sqlite3*,const char*,int),
   void*
@@ -7462,7 +8069,7 @@ SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
 ** is only necessary if the default setting is found to be suboptimal
 ** for a particular application.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
+SQLITE_API int sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 
 /*
 ** CAPI3REF: Checkpoint a database
@@ -7484,7 +8091,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
 ** start a callback but which do not need the full power (and corresponding
 ** complication) of [sqlite3_wal_checkpoint_v2()].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
+SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
 
 /*
 ** CAPI3REF: Checkpoint a database
@@ -7578,7 +8185,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zD
 ** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
 ** from SQL.
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
+SQLITE_API int sqlite3_wal_checkpoint_v2(
   sqlite3 *db,                    /* Database handle */
   const char *zDb,                /* Name of attached database (or NULL) */
   int eMode,                      /* SQLITE_CHECKPOINT_* value */
@@ -7614,7 +8221,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
 ** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].)  Further options
 ** may be added in the future.
 */
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
+SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...);
 
 /*
 ** CAPI3REF: Virtual Table Configuration Options
@@ -7667,7 +8274,7 @@ SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
 ** of the SQL statement that triggered the call to the [xUpdate] method of the
 ** [virtual table].
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
+SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *);
 
 /*
 ** CAPI3REF: Conflict resolution modes
@@ -7772,7 +8379,7 @@ SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
 **
 ** See also: [sqlite3_stmt_scanstatus_reset()]
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
+SQLITE_API int sqlite3_stmt_scanstatus(
   sqlite3_stmt *pStmt,      /* Prepared statement for which info desired */
   int idx,                  /* Index of loop to report on */
   int iScanStatusOp,        /* Information desired.  SQLITE_SCANSTAT_* */
@@ -7788,8 +8395,332 @@ SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
 ** This API is only available if the library is built with pre-processor
 ** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
 */
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+SQLITE_API void sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
+
+/*
+** CAPI3REF: Flush caches to disk mid-transaction
+**
+** ^If a write-transaction is open on [database connection] D when the
+** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
+** pages in the pager-cache that are not currently in use are written out
+** to disk. A dirty page may be in use if a database cursor created by an
+** active SQL statement is reading from it, or if it is page 1 of a database
+** file (page 1 is always "in use").  ^The [sqlite3_db_cacheflush(D)]
+** interface flushes caches for all schemas - "main", "temp", and
+** any [attached] databases.
+**
+** ^If this function needs to obtain extra database locks before dirty pages
+** can be flushed to disk, it does so. ^If those locks cannot be obtained
+** immediately and there is a busy-handler callback configured, it is invoked
+** in the usual manner. ^If the required lock still cannot be obtained, then
+** the database is skipped and an attempt made to flush any dirty pages
+** belonging to the next (if any) database. ^If any databases are skipped
+** because locks cannot be obtained, but no other error occurs, this
+** function returns SQLITE_BUSY.
+**
+** ^If any other error occurs while flushing dirty pages to disk (for
+** example an IO error or out-of-memory condition), then processing is
+** abandoned and an SQLite [error code] is returned to the caller immediately.
+**
+** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
+**
+** ^This function does not set the database handle error code or message
+** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
+*/
+SQLITE_API int sqlite3_db_cacheflush(sqlite3*);
+
+/*
+** CAPI3REF: The pre-update hook.
+**
+** ^These interfaces are only available if SQLite is compiled using the
+** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
+**
+** ^The [sqlite3_preupdate_hook()] interface registers a callback function
+** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
+** on a database table.
+** ^At most one preupdate hook may be registered at a time on a single
+** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
+** the previous setting.
+** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
+** with a NULL pointer as the second parameter.
+** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
+** the first parameter to callbacks.
+**
+** ^The preupdate hook only fires for changes to real database tables; the
+** preupdate hook is not invoked for changes to [virtual tables] or to
+** system tables like sqlite_master or sqlite_stat1.
+**
+** ^The second parameter to the preupdate callback is a pointer to
+** the [database connection] that registered the preupdate hook.
+** ^The third parameter to the preupdate callback is one of the constants
+** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to identify the
+** kind of update operation that is about to occur.
+** ^(The fourth parameter to the preupdate callback is the name of the
+** database within the database connection that is being modified.  This
+** will be "main" for the main database or "temp" for TEMP tables or
+** the name given after the AS keyword in the [ATTACH] statement for attached
+** databases.)^
+** ^The fifth parameter to the preupdate callback is the name of the
+** table that is being modified.
+**
+** For an UPDATE or DELETE operation on a [rowid table], the sixth
+** parameter passed to the preupdate callback is the initial [rowid] of the
+** row being modified or deleted. For an INSERT operation on a rowid table,
+** or any operation on a WITHOUT ROWID table, the value of the sixth
+** parameter is undefined. For an INSERT or UPDATE on a rowid table the
+** seventh parameter is the final rowid value of the row being inserted
+** or updated. The value of the seventh parameter passed to the callback
+** function is not defined for operations on WITHOUT ROWID tables, or for
+** INSERT operations on rowid tables.
+**
+** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
+** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
+** provide additional information about a preupdate event. These routines
+** may only be called from within a preupdate callback.  Invoking any of
+** these routines from outside of a preupdate callback or with a
+** [database connection] pointer that is different from the one supplied
+** to the preupdate callback results in undefined and probably undesirable
+** behavior.
+**
+** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
+** in the row that is being inserted, updated, or deleted.
+**
+** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row before it is updated.  The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
+** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
+** behavior is undefined.  The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
+** a [protected sqlite3_value] that contains the value of the Nth column of
+** the table row after it is updated.  The N parameter must be between 0
+** and one less than the number of columns or the behavior will be
+** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
+** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
+** behavior is undefined.  The [sqlite3_value] that P points to
+** will be destroyed when the preupdate callback returns.
+**
+** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
+** callback was invoked as a result of a direct insert, update, or delete
+** operation; or 1 for inserts, updates, or deletes invoked by top-level
+** triggers; or 2 for changes resulting from triggers called by top-level
+** triggers; and so forth.
+**
+** See also:  [sqlite3_update_hook()]
+*/
+#if defined(SQLITE_ENABLE_PREUPDATE_HOOK)
+SQLITE_API void *sqlite3_preupdate_hook(
+  sqlite3 *db,
+  void(*xPreUpdate)(
+    void *pCtx,                   /* Copy of third arg to preupdate_hook() */
+    sqlite3 *db,                  /* Database handle */
+    int op,                       /* SQLITE_UPDATE, DELETE or INSERT */
+    char const *zDb,              /* Database name */
+    char const *zName,            /* Table name */
+    sqlite3_int64 iKey1,          /* Rowid of row about to be deleted/updated */
+    sqlite3_int64 iKey2           /* New rowid value (for a rowid UPDATE) */
+  ),
+  void*
+);
+SQLITE_API int sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
+SQLITE_API int sqlite3_preupdate_count(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_depth(sqlite3 *);
+SQLITE_API int sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
+#endif
+
+/*
+** CAPI3REF: Low-level system error code
+**
+** ^Attempt to return the underlying operating system error code or error
+** number that caused the most recent I/O error or failure to open a file.
+** The return value is OS-dependent.  For example, on unix systems, after
+** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
+** called to get back the underlying "errno" that caused the problem, such
+** as ENOSPC, EAUTH, EISDIR, and so forth.
+*/
+SQLITE_API int sqlite3_system_errno(sqlite3*);
+
+/*
+** CAPI3REF: Database Snapshot
+** KEYWORDS: {snapshot} {sqlite3_snapshot}
+** EXPERIMENTAL
+**
+** An instance of the snapshot object records the state of a [WAL mode]
+** database for some specific point in history.
+**
+** In [WAL mode], multiple [database connections] that are open on the
+** same database file can each be reading a different historical version
+** of the database file.  When a [database connection] begins a read
+** transaction, that connection sees an unchanging copy of the database
+** as it existed for the point in time when the transaction first started.
+** Subsequent changes to the database from other connections are not seen
+** by the reader until a new read transaction is started.
+**
+** The sqlite3_snapshot object records state information about an historical
+** version of the database file so that it is possible to later open a new read
+** transaction that sees that historical version of the database rather than
+** the most recent version.
+**
+** The constructor for this object is [sqlite3_snapshot_get()].  The
+** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
+** to an historical snapshot (if possible).  The destructor for
+** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
+*/
+typedef struct sqlite3_snapshot {
+  unsigned char hidden[48];
+} sqlite3_snapshot;
+
+/*
+** CAPI3REF: Record A Database Snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
+** new [sqlite3_snapshot] object that records the current state of
+** schema S in database connection D.  ^On success, the
+** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
+** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
+** If there is not already a read-transaction open on schema S when
+** this function is called, one is opened automatically.
+**
+** The following must be true for this function to succeed. If any of
+** the following statements are false when sqlite3_snapshot_get() is
+** called, SQLITE_ERROR is returned. The final value of *P is undefined
+** in this case.
+**
+** <ul>
+**   <li> The database handle must be in [autocommit mode].
+**
+**   <li> Schema S of [database connection] D must be a [WAL mode] database.
+**
+**   <li> There must not be a write transaction open on schema S of database
+**        connection D.
+**
+**   <li> One or more transactions must have been written to the current wal
+**        file since it was created on disk (by any connection). This means
+**        that a snapshot cannot be taken on a wal mode database with no wal
+**        file immediately after it is first opened. At least one transaction
+**        must be written to it first.
+** </ul>
+**
+** This function may also return SQLITE_NOMEM.  If it is called with the
+** database handle in autocommit mode but fails for some other reason,
+** whether or not a read transaction is opened on schema S is undefined.
+**
+** The [sqlite3_snapshot] object returned from a successful call to
+** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
+** to avoid a memory leak.
+**
+** The [sqlite3_snapshot_get()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get(
+  sqlite3 *db,
+  const char *zSchema,
+  sqlite3_snapshot **ppSnapshot
+);
+
+/*
+** CAPI3REF: Start a read transaction on an historical snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
+** read transaction for schema S of
+** [database connection] D such that the read transaction
+** refers to historical [snapshot] P, rather than the most
+** recent change to the database.
+** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
+** or an appropriate [error code] if it fails.
+**
+** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
+** the first operation following the [BEGIN] that takes the schema S
+** out of [autocommit mode].
+** ^In other words, schema S must not currently be in
+** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
+** database connection D must be out of [autocommit mode].
+** ^A [snapshot] will fail to open if it has been overwritten by a
+** [checkpoint].
+** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
+** database connection D does not know that the database file for
+** schema S is in [WAL mode].  A database connection might not know
+** that the database file is in [WAL mode] if there has been no prior
+** I/O on that database connection, or if the database entered [WAL mode]
+** after the most recent I/O on the database connection.)^
+** (Hint: Run "[PRAGMA application_id]" against a newly opened
+** database connection in order to make it ready to use snapshots.)
+**
+** The [sqlite3_snapshot_open()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open(
+  sqlite3 *db,
+  const char *zSchema,
+  sqlite3_snapshot *pSnapshot
+);
+
+/*
+** CAPI3REF: Destroy a snapshot
+** EXPERIMENTAL
+**
+** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
+** The application must eventually free every [sqlite3_snapshot] object
+** using this routine to avoid a memory leak.
+**
+** The [sqlite3_snapshot_free()] interface is only available when the
+** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*);
+
+/*
+** CAPI3REF: Compare the ages of two snapshot handles.
+** EXPERIMENTAL
+**
+** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
+** of two valid snapshot handles.
+**
+** If the two snapshot handles are not associated with the same database
+** file, the result of the comparison is undefined.
+**
+** Additionally, the result of the comparison is only valid if both of the
+** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
+** last time the wal file was deleted. The wal file is deleted when the
+** database is changed back to rollback mode or when the number of database
+** clients drops to zero. If either snapshot handle was obtained before the
+** wal file was last deleted, the value returned by this function
+** is undefined.
+**
+** Otherwise, this API returns a negative value if P1 refers to an older
+** snapshot than P2, zero if the two handles refer to the same database
+** snapshot, and a positive value if P1 is a newer snapshot than P2.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp(
+  sqlite3_snapshot *p1,
+  sqlite3_snapshot *p2
+);
 
+/*
+** CAPI3REF: Recover snapshots from a wal file
+** EXPERIMENTAL
+**
+** If all connections disconnect from a database file but do not perform
+** a checkpoint, the existing wal file is opened along with the database
+** file the next time the database is opened. At this point it is only
+** possible to successfully call sqlite3_snapshot_open() to open the most
+** recent snapshot of the database (the one at the head of the wal file),
+** even though the wal file may contain other valid snapshots for which
+** clients have sqlite3_snapshot handles.
+**
+** This function attempts to scan the wal file associated with database zDb
+** of database handle db and make all valid snapshots available to
+** sqlite3_snapshot_open(). It is an error if there is already a read
+** transaction open on the database, or if the database is not a wal mode
+** database.
+**
+** SQLITE_OK is returned if successful, or an SQLite error code otherwise.
+*/
+SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb);
 
 /*
 ** Undo the hack that converts floating point types to integer for
@@ -7802,8 +8733,9 @@ SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
 #ifdef __cplusplus
 }  /* End of the 'extern "C"' block */
 #endif
-#endif /* _SQLITE3_H_ */
+#endif /* SQLITE3_H */
 
+/******** Begin file sqlite3rtree.h *********/
 /*
 ** 2010 August 30
 **
@@ -7843,7 +8775,7 @@ typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zGeom(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
+SQLITE_API int sqlite3_rtree_geometry_callback(
   sqlite3 *db,
   const char *zGeom,
   int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
@@ -7869,7 +8801,7 @@ struct sqlite3_rtree_geometry {
 **
 **   SELECT ... FROM <rtree> WHERE <rtree col> MATCH $zQueryFunc(... params ...)
 */
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
+SQLITE_API int sqlite3_rtree_query_callback(
   sqlite3 *db,
   const char *zQueryFunc,
   int (*xQueryFunc)(sqlite3_rtree_query_info*),
@@ -7921,6 +8853,1298 @@ struct sqlite3_rtree_query_info {
 
 #endif  /* ifndef _SQLITE3RTREE_H_ */
 
+/******** End of sqlite3rtree.h *********/
+/******** Begin file sqlite3session.h *********/
+
+#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
+#define __SQLITESESSION_H_ 1
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+** CAPI3REF: Session Object Handle
+*/
+typedef struct sqlite3_session sqlite3_session;
+
+/*
+** CAPI3REF: Changeset Iterator Handle
+*/
+typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
+
+/*
+** CAPI3REF: Create A New Session Object
+**
+** Create a new session object attached to database handle db. If successful,
+** a pointer to the new object is written to *ppSession and SQLITE_OK is
+** returned. If an error occurs, *ppSession is set to NULL and an SQLite
+** error code (e.g. SQLITE_NOMEM) is returned.
+**
+** It is possible to create multiple session objects attached to a single
+** database handle.
+**
+** Session objects created using this function should be deleted using the
+** [sqlite3session_delete()] function before the database handle that they
+** are attached to is itself closed. If the database handle is closed before
+** the session object is deleted, then the results of calling any session
+** module function, including [sqlite3session_delete()] on the session object
+** are undefined.
+**
+** Because the session module uses the [sqlite3_preupdate_hook()] API, it
+** is not possible for an application to register a pre-update hook on a
+** database handle that has one or more session objects attached. Nor is
+** it possible to create a session object attached to a database handle for
+** which a pre-update hook is already defined. The results of attempting
+** either of these things are undefined.
+**
+** The session object will be used to create changesets for tables in
+** database zDb, where zDb is either "main", or "temp", or the name of an
+** attached database. It is not an error if database zDb is not attached
+** to the database when the session object is created.
+*/
+SQLITE_API int sqlite3session_create(
+  sqlite3 *db,                    /* Database handle */
+  const char *zDb,                /* Name of db (e.g. "main") */
+  sqlite3_session **ppSession     /* OUT: New session object */
+);
+
+/*
+** CAPI3REF: Delete A Session Object
+**
+** Delete a session object previously allocated using
+** [sqlite3session_create()]. Once a session object has been deleted, the
+** results of attempting to use pSession with any other session module
+** function are undefined.
+**
+** Session objects must be deleted before the database handle to which they
+** are attached is closed. Refer to the documentation for
+** [sqlite3session_create()] for details.
+*/
+SQLITE_API void sqlite3session_delete(sqlite3_session *pSession);
+
+
+/*
+** CAPI3REF: Enable Or Disable A Session Object
+**
+** Enable or disable the recording of changes by a session object. When
+** enabled, a session object records changes made to the database. When
+** disabled - it does not. A newly created session object is enabled.
+** Refer to the documentation for [sqlite3session_changeset()] for further
+** details regarding how enabling and disabling a session object affects
+** the eventual changesets.
+**
+** Passing zero to this function disables the session. Passing a value
+** greater than zero enables it. Passing a value less than zero is a
+** no-op, and may be used to query the current state of the session.
+**
+** The return value indicates the final state of the session object: 0 if
+** the session is disabled, or 1 if it is enabled.
+*/
+SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
+
+/*
+** CAPI3REF: Set Or Clear the Indirect Change Flag
+**
+** Each change recorded by a session object is marked as either direct or
+** indirect. A change is marked as indirect if either:
+**
+** <ul>
+**   <li> The session object "indirect" flag is set when the change is
+**        made, or
+**   <li> The change is made by an SQL trigger or foreign key action
+**        instead of directly as a result of a users SQL statement.
+** </ul>
+**
+** If a single row is affected by more than one operation within a session,
+** then the change is considered indirect if all operations meet the criteria
+** for an indirect change above, or direct otherwise.
+**
+** This function is used to set, clear or query the session object indirect
+** flag.  If the second argument passed to this function is zero, then the
+** indirect flag is cleared. If it is greater than zero, the indirect flag
+** is set. Passing a value less than zero does not modify the current value
+** of the indirect flag, and may be used to query the current state of the
+** indirect flag for the specified session object.
+**
+** The return value indicates the final state of the indirect flag: 0 if
+** it is clear, or 1 if it is set.
+*/
+SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
+
+/*
+** CAPI3REF: Attach A Table To A Session Object
+**
+** If argument zTab is not NULL, then it is the name of a table to attach
+** to the session object passed as the first argument. All subsequent changes
+** made to the table while the session object is enabled will be recorded. See
+** documentation for [sqlite3session_changeset()] for further details.
+**
+** Or, if argument zTab is NULL, then changes are recorded for all tables
+** in the database. If additional tables are added to the database (by
+** executing "CREATE TABLE" statements) after this call is made, changes for
+** the new tables are also recorded.
+**
+** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
+** defined as part of their CREATE TABLE statement. It does not matter if the
+** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
+** KEY may consist of a single column, or may be a composite key.
+**
+** It is not an error if the named table does not exist in the database. Nor
+** is it an error if the named table does not have a PRIMARY KEY. However,
+** no changes will be recorded in either of these scenarios.
+**
+** Changes are not recorded for individual rows that have NULL values stored
+** in one or more of their PRIMARY KEY columns.
+**
+** SQLITE_OK is returned if the call completes without error. Or, if an error
+** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
+*/
+SQLITE_API int sqlite3session_attach(
+  sqlite3_session *pSession,      /* Session object */
+  const char *zTab                /* Table name */
+);
+
+/*
+** CAPI3REF: Set a table filter on a Session Object.
+**
+** The second argument (xFilter) is the "filter callback". For changes to rows
+** in tables that are not attached to the Session object, the filter is called
+** to determine whether changes to the table's rows should be tracked or not.
+** If xFilter returns 0, changes is not tracked. Note that once a table is
+** attached, xFilter will not be called again.
+*/
+SQLITE_API void sqlite3session_table_filter(
+  sqlite3_session *pSession,      /* Session object */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of third arg to _filter_table() */
+    const char *zTab              /* Table name */
+  ),
+  void *pCtx                      /* First argument passed to xFilter */
+);
+
+/*
+** CAPI3REF: Generate A Changeset From A Session Object
+**
+** Obtain a changeset containing changes to the tables attached to the
+** session object passed as the first argument. If successful,
+** set *ppChangeset to point to a buffer containing the changeset
+** and *pnChangeset to the size of the changeset in bytes before returning
+** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
+** zero and return an SQLite error code.
+**
+** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
+** each representing a change to a single row of an attached table. An INSERT
+** change contains the values of each field of a new database row. A DELETE
+** contains the original values of each field of a deleted database row. An
+** UPDATE change contains the original values of each field of an updated
+** database row along with the updated values for each updated non-primary-key
+** column. It is not possible for an UPDATE change to represent a change that
+** modifies the values of primary key columns. If such a change is made, it
+** is represented in a changeset as a DELETE followed by an INSERT.
+**
+** Changes are not recorded for rows that have NULL values stored in one or
+** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
+** no corresponding change is present in the changesets returned by this
+** function. If an existing row with one or more NULL values stored in
+** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
+** only an INSERT is appears in the changeset. Similarly, if an existing row
+** with non-NULL PRIMARY KEY values is updated so that one or more of its
+** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
+** DELETE change only.
+**
+** The contents of a changeset may be traversed using an iterator created
+** using the [sqlite3changeset_start()] API. A changeset may be applied to
+** a database with a compatible schema using the [sqlite3changeset_apply()]
+** API.
+**
+** Within a changeset generated by this function, all changes related to a
+** single table are grouped together. In other words, when iterating through
+** a changeset or when applying a changeset to a database, all changes related
+** to a single table are processed before moving on to the next table. Tables
+** are sorted in the same order in which they were attached (or auto-attached)
+** to the sqlite3_session object. The order in which the changes related to
+** a single table are stored is undefined.
+**
+** Following a successful call to this function, it is the responsibility of
+** the caller to eventually free the buffer that *ppChangeset points to using
+** [sqlite3_free()].
+**
+** <h3>Changeset Generation</h3>
+**
+** Once a table has been attached to a session object, the session object
+** records the primary key values of all new rows inserted into the table.
+** It also records the original primary key and other column values of any
+** deleted or updated rows. For each unique primary key value, data is only
+** recorded once - the first time a row with said primary key is inserted,
+** updated or deleted in the lifetime of the session.
+**
+** There is one exception to the previous paragraph: when a row is inserted,
+** updated or deleted, if one or more of its primary key columns contain a
+** NULL value, no record of the change is made.
+**
+** The session object therefore accumulates two types of records - those
+** that consist of primary key values only (created when the user inserts
+** a new record) and those that consist of the primary key values and the
+** original values of other table columns (created when the users deletes
+** or updates a record).
+**
+** When this function is called, the requested changeset is created using
+** both the accumulated records and the current contents of the database
+** file. Specifically:
+**
+** <ul>
+**   <li> For each record generated by an insert, the database is queried
+**        for a row with a matching primary key. If one is found, an INSERT
+**        change is added to the changeset. If no such row is found, no change
+**        is added to the changeset.
+**
+**   <li> For each record generated by an update or delete, the database is
+**        queried for a row with a matching primary key. If such a row is
+**        found and one or more of the non-primary key fields have been
+**        modified from their original values, an UPDATE change is added to
+**        the changeset. Or, if no such row is found in the table, a DELETE
+**        change is added to the changeset. If there is a row with a matching
+**        primary key in the database, but all fields contain their original
+**        values, no change is added to the changeset.
+** </ul>
+**
+** This means, amongst other things, that if a row is inserted and then later
+** deleted while a session object is active, neither the insert nor the delete
+** will be present in the changeset. Or if a row is deleted and then later a
+** row with the same primary key values inserted while a session object is
+** active, the resulting changeset will contain an UPDATE change instead of
+** a DELETE and an INSERT.
+**
+** When a session object is disabled (see the [sqlite3session_enable()] API),
+** it does not accumulate records when rows are inserted, updated or deleted.
+** This may appear to have some counter-intuitive effects if a single row
+** is written to more than once during a session. For example, if a row
+** is inserted while a session object is enabled, then later deleted while
+** the same session object is disabled, no INSERT record will appear in the
+** changeset, even though the delete took place while the session was disabled.
+** Or, if one field of a row is updated while a session is disabled, and
+** another field of the same row is updated while the session is enabled, the
+** resulting changeset will contain an UPDATE change that updates both fields.
+*/
+SQLITE_API int sqlite3session_changeset(
+  sqlite3_session *pSession,      /* Session object */
+  int *pnChangeset,               /* OUT: Size of buffer at *ppChangeset */
+  void **ppChangeset              /* OUT: Buffer containing changeset */
+);
+
+/*
+** CAPI3REF: Load The Difference Between Tables Into A Session
+**
+** If it is not already attached to the session object passed as the first
+** argument, this function attaches table zTbl in the same manner as the
+** [sqlite3session_attach()] function. If zTbl does not exist, or if it
+** does not have a primary key, this function is a no-op (but does not return
+** an error).
+**
+** Argument zFromDb must be the name of a database ("main", "temp" etc.)
+** attached to the same database handle as the session object that contains
+** a table compatible with the table attached to the session by this function.
+** A table is considered compatible if it:
+**
+** <ul>
+**   <li> Has the same name,
+**   <li> Has the same set of columns declared in the same order, and
+**   <li> Has the same PRIMARY KEY definition.
+** </ul>
+**
+** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
+** are compatible but do not have any PRIMARY KEY columns, it is not an error
+** but no changes are added to the session object. As with other session
+** APIs, tables without PRIMARY KEYs are simply ignored.
+**
+** This function adds a set of changes to the session object that could be
+** used to update the table in database zFrom (call this the "from-table")
+** so that its content is the same as the table attached to the session
+** object (call this the "to-table"). Specifically:
+**
+** <ul>
+**   <li> For each row (primary key) that exists in the to-table but not in
+**     the from-table, an INSERT record is added to the session object.
+**
+**   <li> For each row (primary key) that exists in the to-table but not in
+**     the from-table, a DELETE record is added to the session object.
+**
+**   <li> For each row (primary key) that exists in both tables, but features
+**     different non-PK values in each, an UPDATE record is added to the
+**     session.
+** </ul>
+**
+** To clarify, if this function is called and then a changeset constructed
+** using [sqlite3session_changeset()], then after applying that changeset to
+** database zFrom the contents of the two compatible tables would be
+** identical.
+**
+** It an error if database zFrom does not exist or does not contain the
+** required compatible table.
+**
+** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
+** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
+** may be set to point to a buffer containing an English language error
+** message. It is the responsibility of the caller to free this buffer using
+** sqlite3_free().
+*/
+SQLITE_API int sqlite3session_diff(
+  sqlite3_session *pSession,
+  const char *zFromDb,
+  const char *zTbl,
+  char **pzErrMsg
+);
+
+
+/*
+** CAPI3REF: Generate A Patchset From A Session Object
+**
+** The differences between a patchset and a changeset are that:
+**
+** <ul>
+**   <li> DELETE records consist of the primary key fields only. The
+**        original values of other fields are omitted.
+**   <li> The original values of any modified fields are omitted from
+**        UPDATE records.
+** </ul>
+**
+** A patchset blob may be used with up to date versions of all
+** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
+** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
+** attempting to use a patchset blob with old versions of the
+** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
+**
+** Because the non-primary key "old.*" fields are omitted, no
+** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
+** is passed to the sqlite3changeset_apply() API. Other conflict types work
+** in the same way as for changesets.
+**
+** Changes within a patchset are ordered in the same way as for changesets
+** generated by the sqlite3session_changeset() function (i.e. all changes for
+** a single table are grouped together, tables appear in the order in which
+** they were attached to the session object).
+*/
+SQLITE_API int sqlite3session_patchset(
+  sqlite3_session *pSession,      /* Session object */
+  int *pnPatchset,                /* OUT: Size of buffer at *ppPatchset */
+  void **ppPatchset               /* OUT: Buffer containing patchset */
+);
+
+/*
+** CAPI3REF: Test if a changeset has recorded any changes.
+**
+** Return non-zero if no changes to attached tables have been recorded by
+** the session object passed as the first argument. Otherwise, if one or
+** more changes have been recorded, return zero.
+**
+** Even if this function returns zero, it is possible that calling
+** [sqlite3session_changeset()] on the session handle may still return a
+** changeset that contains no changes. This can happen when a row in
+** an attached table is modified and then later on the original values
+** are restored. However, if this function returns non-zero, then it is
+** guaranteed that a call to sqlite3session_changeset() will return a
+** changeset containing zero changes.
+*/
+SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession);
+
+/*
+** CAPI3REF: Create An Iterator To Traverse A Changeset
+**
+** Create an iterator used to iterate through the contents of a changeset.
+** If successful, *pp is set to point to the iterator handle and SQLITE_OK
+** is returned. Otherwise, if an error occurs, *pp is set to zero and an
+** SQLite error code is returned.
+**
+** The following functions can be used to advance and query a changeset
+** iterator created by this function:
+**
+** <ul>
+**   <li> [sqlite3changeset_next()]
+**   <li> [sqlite3changeset_op()]
+**   <li> [sqlite3changeset_new()]
+**   <li> [sqlite3changeset_old()]
+** </ul>
+**
+** It is the responsibility of the caller to eventually destroy the iterator
+** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
+** changeset (pChangeset) must remain valid until after the iterator is
+** destroyed.
+**
+** Assuming the changeset blob was created by one of the
+** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
+** [sqlite3changeset_invert()] functions, all changes within the changeset
+** that apply to a single table are grouped together. This means that when
+** an application iterates through a changeset using an iterator created by
+** this function, all changes that relate to a single table are visited
+** consecutively. There is no chance that the iterator will visit a change
+** the applies to table X, then one for table Y, and then later on visit
+** another change for table X.
+*/
+SQLITE_API int sqlite3changeset_start(
+  sqlite3_changeset_iter **pp,    /* OUT: New changeset iterator handle */
+  int nChangeset,                 /* Size of changeset blob in bytes */
+  void *pChangeset                /* Pointer to blob containing changeset */
+);
+
+
+/*
+** CAPI3REF: Advance A Changeset Iterator
+**
+** This function may only be used with iterators created by function
+** [sqlite3changeset_start()]. If it is called on an iterator passed to
+** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
+** is returned and the call has no effect.
+**
+** Immediately after an iterator is created by sqlite3changeset_start(), it
+** does not point to any change in the changeset. Assuming the changeset
+** is not empty, the first call to this function advances the iterator to
+** point to the first change in the changeset. Each subsequent call advances
+** the iterator to point to the next change in the changeset (if any). If
+** no error occurs and the iterator points to a valid change after a call
+** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
+** Otherwise, if all changes in the changeset have already been visited,
+** SQLITE_DONE is returned.
+**
+** If an error occurs, an SQLite error code is returned. Possible error
+** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
+** SQLITE_NOMEM.
+*/
+SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
+** is not the case, this function returns [SQLITE_MISUSE].
+**
+** If argument pzTab is not NULL, then *pzTab is set to point to a
+** nul-terminated utf-8 encoded string containing the name of the table
+** affected by the current change. The buffer remains valid until either
+** sqlite3changeset_next() is called on the iterator or until the
+** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
+** set to the number of columns in the table affected by the change. If
+** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
+** is an indirect change, or false (0) otherwise. See the documentation for
+** [sqlite3session_indirect()] for a description of direct and indirect
+** changes. Finally, if pOp is not NULL, then *pOp is set to one of
+** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
+** type of change that the iterator currently points to.
+**
+** If no error occurs, SQLITE_OK is returned. If an error does occur, an
+** SQLite error code is returned. The values of the output variables may not
+** be trusted in this case.
+*/
+SQLITE_API int sqlite3changeset_op(
+  sqlite3_changeset_iter *pIter,  /* Iterator object */
+  const char **pzTab,             /* OUT: Pointer to table name */
+  int *pnCol,                     /* OUT: Number of columns in table */
+  int *pOp,                       /* OUT: SQLITE_INSERT, DELETE or UPDATE */
+  int *pbIndirect                 /* OUT: True for an 'indirect' change */
+);
+
+/*
+** CAPI3REF: Obtain The Primary Key Definition Of A Table
+**
+** For each modified table, a changeset includes the following:
+**
+** <ul>
+**   <li> The number of columns in the table, and
+**   <li> Which of those columns make up the tables PRIMARY KEY.
+** </ul>
+**
+** This function is used to find which columns comprise the PRIMARY KEY of
+** the table modified by the change that iterator pIter currently points to.
+** If successful, *pabPK is set to point to an array of nCol entries, where
+** nCol is the number of columns in the table. Elements of *pabPK are set to
+** 0x01 if the corresponding column is part of the tables primary key, or
+** 0x00 if it is not.
+**
+** If argument pnCol is not NULL, then *pnCol is set to the number of columns
+** in the table.
+**
+** If this function is called when the iterator does not point to a valid
+** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
+** SQLITE_OK is returned and the output variables populated as described
+** above.
+*/
+SQLITE_API int sqlite3changeset_pk(
+  sqlite3_changeset_iter *pIter,  /* Iterator object */
+  unsigned char **pabPK,          /* OUT: Array of boolean - true for PK cols */
+  int *pnCol                      /* OUT: Number of entries in output array */
+);
+
+/*
+** CAPI3REF: Obtain old.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** original row values stored as part of the UPDATE or DELETE change and
+** returns SQLITE_OK. The name of the function comes from the fact that this
+** is similar to the "old.*" columns available to update or delete triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_old(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int iVal,                       /* Column number */
+  sqlite3_value **ppValue         /* OUT: Old value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain new.* Values From A Changeset Iterator
+**
+** The pIter argument passed to this function may either be an iterator
+** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
+** created by [sqlite3changeset_start()]. In the latter case, the most recent
+** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
+** Furthermore, it may only be called if the type of change that the iterator
+** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
+** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the vector of
+** new row values stored as part of the UPDATE or INSERT change and
+** returns SQLITE_OK. If the change is an UPDATE and does not include
+** a new value for the requested column, *ppValue is set to NULL and
+** SQLITE_OK returned. The name of the function comes from the fact that
+** this is similar to the "new.*" columns available to update or delete
+** triggers.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_new(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int iVal,                       /* Column number */
+  sqlite3_value **ppValue         /* OUT: New value (or NULL pointer) */
+);
+
+/*
+** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
+**
+** This function should only be used with iterator objects passed to a
+** conflict-handler callback by [sqlite3changeset_apply()] with either
+** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
+** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
+** is set to NULL.
+**
+** Argument iVal must be greater than or equal to 0, and less than the number
+** of columns in the table affected by the current change. Otherwise,
+** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
+**
+** If successful, this function sets *ppValue to point to a protected
+** sqlite3_value object containing the iVal'th value from the
+** "conflicting row" associated with the current conflict-handler callback
+** and returns SQLITE_OK.
+**
+** If some other error occurs (e.g. an OOM condition), an SQLite error code
+** is returned and *ppValue is set to NULL.
+*/
+SQLITE_API int sqlite3changeset_conflict(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int iVal,                       /* Column number */
+  sqlite3_value **ppValue         /* OUT: Value from conflicting row */
+);
+
+/*
+** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
+**
+** This function may only be called with an iterator passed to an
+** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
+** it sets the output variable to the total number of known foreign key
+** violations in the destination database and returns SQLITE_OK.
+**
+** In all other cases this function returns SQLITE_MISUSE.
+*/
+SQLITE_API int sqlite3changeset_fk_conflicts(
+  sqlite3_changeset_iter *pIter,  /* Changeset iterator */
+  int *pnOut                      /* OUT: Number of FK violations */
+);
+
+
+/*
+** CAPI3REF: Finalize A Changeset Iterator
+**
+** This function is used to finalize an iterator allocated with
+** [sqlite3changeset_start()].
+**
+** This function should only be called on iterators created using the
+** [sqlite3changeset_start()] function. If an application calls this
+** function with an iterator passed to a conflict-handler by
+** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
+** call has no effect.
+**
+** If an error was encountered within a call to an sqlite3changeset_xxx()
+** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
+** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
+** to that error is returned by this function. Otherwise, SQLITE_OK is
+** returned. This is to allow the following pattern (pseudo-code):
+**
+**   sqlite3changeset_start();
+**   while( SQLITE_ROW==sqlite3changeset_next() ){
+**     // Do something with change.
+**   }
+**   rc = sqlite3changeset_finalize();
+**   if( rc!=SQLITE_OK ){
+**     // An error has occurred
+**   }
+*/
+SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
+
+/*
+** CAPI3REF: Invert A Changeset
+**
+** This function is used to "invert" a changeset object. Applying an inverted
+** changeset to a database reverses the effects of applying the uninverted
+** changeset. Specifically:
+**
+** <ul>
+**   <li> Each DELETE change is changed to an INSERT, and
+**   <li> Each INSERT change is changed to a DELETE, and
+**   <li> For each UPDATE change, the old.* and new.* values are exchanged.
+** </ul>
+**
+** This function does not change the order in which changes appear within
+** the changeset. It merely reverses the sense of each individual change.
+**
+** If successful, a pointer to a buffer containing the inverted changeset
+** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and
+** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are
+** zeroed and an SQLite error code returned.
+**
+** It is the responsibility of the caller to eventually call sqlite3_free()
+** on the *ppOut pointer to free the buffer allocation following a successful
+** call to this function.
+**
+** WARNING/TODO: This function currently assumes that the input is a valid
+** changeset. If it is not, the results are undefined.
+*/
+SQLITE_API int sqlite3changeset_invert(
+  int nIn, const void *pIn,       /* Input changeset */
+  int *pnOut, void **ppOut        /* OUT: Inverse of input */
+);
+
+/*
+** CAPI3REF: Concatenate Two Changeset Objects
+**
+** This function is used to concatenate two changesets, A and B, into a
+** single changeset. The result is a changeset equivalent to applying
+** changeset A followed by changeset B.
+**
+** This function combines the two input changesets using an
+** sqlite3_changegroup object. Calling it produces similar results as the
+** following code fragment:
+**
+**   sqlite3_changegroup *pGrp;
+**   rc = sqlite3_changegroup_new(&pGrp);
+**   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
+**   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
+**   if( rc==SQLITE_OK ){
+**     rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
+**   }else{
+**     *ppOut = 0;
+**     *pnOut = 0;
+**   }
+**
+** Refer to the sqlite3_changegroup documentation below for details.
+*/
+SQLITE_API int sqlite3changeset_concat(
+  int nA,                         /* Number of bytes in buffer pA */
+  void *pA,                       /* Pointer to buffer containing changeset A */
+  int nB,                         /* Number of bytes in buffer pB */
+  void *pB,                       /* Pointer to buffer containing changeset B */
+  int *pnOut,                     /* OUT: Number of bytes in output changeset */
+  void **ppOut                    /* OUT: Buffer containing output changeset */
+);
+
+
+/*
+** CAPI3REF: Changegroup Handle
+*/
+typedef struct sqlite3_changegroup sqlite3_changegroup;
+
+/*
+** CAPI3REF: Create A New Changegroup Object
+**
+** An sqlite3_changegroup object is used to combine two or more changesets
+** (or patchsets) into a single changeset (or patchset). A single changegroup
+** object may combine changesets or patchsets, but not both. The output is
+** always in the same format as the input.
+**
+** If successful, this function returns SQLITE_OK and populates (*pp) with
+** a pointer to a new sqlite3_changegroup object before returning. The caller
+** should eventually free the returned object using a call to
+** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
+** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
+**
+** The usual usage pattern for an sqlite3_changegroup object is as follows:
+**
+** <ul>
+**   <li> It is created using a call to sqlite3changegroup_new().
+**
+**   <li> Zero or more changesets (or patchsets) are added to the object
+**        by calling sqlite3changegroup_add().
+**
+**   <li> The result of combining all input changesets together is obtained
+**        by the application via a call to sqlite3changegroup_output().
+**
+**   <li> The object is deleted using a call to sqlite3changegroup_delete().
+** </ul>
+**
+** Any number of calls to add() and output() may be made between the calls to
+** new() and delete(), and in any order.
+**
+** As well as the regular sqlite3changegroup_add() and
+** sqlite3changegroup_output() functions, also available are the streaming
+** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
+*/
+SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp);
+
+/*
+** CAPI3REF: Add A Changeset To A Changegroup
+**
+** Add all changes within the changeset (or patchset) in buffer pData (size
+** nData bytes) to the changegroup.
+**
+** If the buffer contains a patchset, then all prior calls to this function
+** on the same changegroup object must also have specified patchsets. Or, if
+** the buffer contains a changeset, so must have the earlier calls to this
+** function. Otherwise, SQLITE_ERROR is returned and no changes are added
+** to the changegroup.
+**
+** Rows within the changeset and changegroup are identified by the values in
+** their PRIMARY KEY columns. A change in the changeset is considered to
+** apply to the same row as a change already present in the changegroup if
+** the two rows have the same primary key.
+**
+** Changes to rows that do not already appear in the changegroup are
+** simply copied into it. Or, if both the new changeset and the changegroup
+** contain changes that apply to a single row, the final contents of the
+** changegroup depends on the type of each change, as follows:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+**   <tr><th style="white-space:pre">Existing Change  </th>
+**       <th style="white-space:pre">New Change       </th>
+**       <th>Output Change
+**   <tr><td>INSERT <td>INSERT <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+**   <tr><td>INSERT <td>UPDATE <td>
+**       The INSERT change remains in the changegroup. The values in the
+**       INSERT change are modified as if the row was inserted by the
+**       existing change and then updated according to the new change.
+**   <tr><td>INSERT <td>DELETE <td>
+**       The existing INSERT is removed from the changegroup. The DELETE is
+**       not added.
+**   <tr><td>UPDATE <td>INSERT <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+**   <tr><td>UPDATE <td>UPDATE <td>
+**       The existing UPDATE remains within the changegroup. It is amended
+**       so that the accompanying values are as if the row was updated once
+**       by the existing change and then again by the new change.
+**   <tr><td>UPDATE <td>DELETE <td>
+**       The existing UPDATE is replaced by the new DELETE within the
+**       changegroup.
+**   <tr><td>DELETE <td>INSERT <td>
+**       If one or more of the column values in the row inserted by the
+**       new change differ from those in the row deleted by the existing
+**       change, the existing DELETE is replaced by an UPDATE within the
+**       changegroup. Otherwise, if the inserted row is exactly the same
+**       as the deleted row, the existing DELETE is simply discarded.
+**   <tr><td>DELETE <td>UPDATE <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+**   <tr><td>DELETE <td>DELETE <td>
+**       The new change is ignored. This case does not occur if the new
+**       changeset was recorded immediately after the changesets already
+**       added to the changegroup.
+** </table>
+**
+** If the new changeset contains changes to a table that is already present
+** in the changegroup, then the number of columns and the position of the
+** primary key columns for the table must be consistent. If this is not the
+** case, this function fails with SQLITE_SCHEMA. If the input changeset
+** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
+** returned. Or, if an out-of-memory condition occurs during processing, this
+** function returns SQLITE_NOMEM. In all cases, if an error occurs the
+** final contents of the changegroup is undefined.
+**
+** If no error occurs, SQLITE_OK is returned.
+*/
+SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
+
+/*
+** CAPI3REF: Obtain A Composite Changeset From A Changegroup
+**
+** Obtain a buffer containing a changeset (or patchset) representing the
+** current contents of the changegroup. If the inputs to the changegroup
+** were themselves changesets, the output is a changeset. Or, if the
+** inputs were patchsets, the output is also a patchset.
+**
+** As with the output of the sqlite3session_changeset() and
+** sqlite3session_patchset() functions, all changes related to a single
+** table are grouped together in the output of this function. Tables appear
+** in the same order as for the very first changeset added to the changegroup.
+** If the second or subsequent changesets added to the changegroup contain
+** changes for tables that do not appear in the first changeset, they are
+** appended onto the end of the output changeset, again in the order in
+** which they are first encountered.
+**
+** If an error occurs, an SQLite error code is returned and the output
+** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
+** is returned and the output variables are set to the size of and a
+** pointer to the output buffer, respectively. In this case it is the
+** responsibility of the caller to eventually free the buffer using a
+** call to sqlite3_free().
+*/
+SQLITE_API int sqlite3changegroup_output(
+  sqlite3_changegroup*,
+  int *pnData,                    /* OUT: Size of output buffer in bytes */
+  void **ppData                   /* OUT: Pointer to output buffer */
+);
+
+/*
+** CAPI3REF: Delete A Changegroup Object
+*/
+SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*);
+
+/*
+** CAPI3REF: Apply A Changeset To A Database
+**
+** Apply a changeset to a database. This function attempts to update the
+** "main" database attached to handle db with the changes found in the
+** changeset passed via the second and third arguments.
+**
+** The fourth argument (xFilter) passed to this function is the "filter
+** callback". If it is not NULL, then for each table affected by at least one
+** change in the changeset, the filter callback is invoked with
+** the table name as the second argument, and a copy of the context pointer
+** passed as the sixth argument to this function as the first. If the "filter
+** callback" returns zero, then no attempt is made to apply any changes to
+** the table. Otherwise, if the return value is non-zero or the xFilter
+** argument to this function is NULL, all changes related to the table are
+** attempted.
+**
+** For each table that is not excluded by the filter callback, this function
+** tests that the target database contains a compatible table. A table is
+** considered compatible if all of the following are true:
+**
+** <ul>
+**   <li> The table has the same name as the name recorded in the
+**        changeset, and
+**   <li> The table has at least as many columns as recorded in the
+**        changeset, and
+**   <li> The table has primary key columns in the same position as
+**        recorded in the changeset.
+** </ul>
+**
+** If there is no compatible table, it is not an error, but none of the
+** changes associated with the table are applied. A warning message is issued
+** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
+** one such warning is issued for each table in the changeset.
+**
+** For each change for which there is a compatible table, an attempt is made
+** to modify the table contents according to the UPDATE, INSERT or DELETE
+** change. If a change cannot be applied cleanly, the conflict handler
+** function passed as the fifth argument to sqlite3changeset_apply() may be
+** invoked. A description of exactly when the conflict handler is invoked for
+** each type of change is below.
+**
+** Unlike the xFilter argument, xConflict may not be passed NULL. The results
+** of passing anything other than a valid function pointer as the xConflict
+** argument are undefined.
+**
+** Each time the conflict handler function is invoked, it must return one
+** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
+** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
+** if the second argument passed to the conflict handler is either
+** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
+** returns an illegal value, any changes already made are rolled back and
+** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
+** actions are taken by sqlite3changeset_apply() depending on the value
+** returned by each invocation of the conflict-handler function. Refer to
+** the documentation for the three
+** [SQLITE_CHANGESET_OMIT|available return values] for details.
+**
+** <dl>
+** <dt>DELETE Changes<dd>
+**   For each DELETE change, this function checks if the target database
+**   contains a row with the same primary key value (or values) as the
+**   original row values stored in the changeset. If it does, and the values
+**   stored in all non-primary key columns also match the values stored in
+**   the changeset the row is deleted from the target database.
+**
+**   If a row with matching primary key values is found, but one or more of
+**   the non-primary key fields contains a value different from the original
+**   row value stored in the changeset, the conflict-handler function is
+**   invoked with [SQLITE_CHANGESET_DATA] as the second argument. If the
+**   database table has more columns than are recorded in the changeset,
+**   only the values of those non-primary key fields are compared against
+**   the current database contents - any trailing database table columns
+**   are ignored.
+**
+**   If no row with matching primary key values is found in the database,
+**   the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+**   passed as the second argument.
+**
+**   If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
+**   (which can only happen if a foreign key constraint is violated), the
+**   conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
+**   passed as the second argument. This includes the case where the DELETE
+**   operation is attempted because an earlier call to the conflict handler
+**   function returned [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>INSERT Changes<dd>
+**   For each INSERT change, an attempt is made to insert the new row into
+**   the database. If the changeset row contains fewer fields than the
+**   database table, the trailing fields are populated with their default
+**   values.
+**
+**   If the attempt to insert the row fails because the database already
+**   contains a row with the same primary key values, the conflict handler
+**   function is invoked with the second argument set to
+**   [SQLITE_CHANGESET_CONFLICT].
+**
+**   If the attempt to insert the row fails because of some other constraint
+**   violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
+**   invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
+**   This includes the case where the INSERT operation is re-attempted because
+**   an earlier call to the conflict handler function returned
+**   [SQLITE_CHANGESET_REPLACE].
+**
+** <dt>UPDATE Changes<dd>
+**   For each UPDATE change, this function checks if the target database
+**   contains a row with the same primary key value (or values) as the
+**   original row values stored in the changeset. If it does, and the values
+**   stored in all modified non-primary key columns also match the values
+**   stored in the changeset the row is updated within the target database.
+**
+**   If a row with matching primary key values is found, but one or more of
+**   the modified non-primary key fields contains a value different from an
+**   original row value stored in the changeset, the conflict-handler function
+**   is invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
+**   UPDATE changes only contain values for non-primary key fields that are
+**   to be modified, only those fields need to match the original values to
+**   avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
+**
+**   If no row with matching primary key values is found in the database,
+**   the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
+**   passed as the second argument.
+**
+**   If the UPDATE operation is attempted, but SQLite returns
+**   SQLITE_CONSTRAINT, the conflict-handler function is invoked with
+**   [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
+**   This includes the case where the UPDATE operation is attempted after
+**   an earlier call to the conflict handler function returned
+**   [SQLITE_CHANGESET_REPLACE].
+** </dl>
+**
+** It is safe to execute SQL statements, including those that write to the
+** table that the callback related to, from within the xConflict callback.
+** This can be used to further customize the applications conflict
+** resolution strategy.
+**
+** All changes made by this function are enclosed in a savepoint transaction.
+** If any other error (aside from a constraint failure when attempting to
+** write to the target database) occurs, then the savepoint transaction is
+** rolled back, restoring the target database to its original state, and an
+** SQLite error code returned.
+*/
+SQLITE_API int sqlite3changeset_apply(
+  sqlite3 *db,                    /* Apply change to "main" db of this handle */
+  int nChangeset,                 /* Size of changeset in bytes */
+  void *pChangeset,               /* Changeset blob */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    const char *zTab              /* Table name */
+  ),
+  int(*xConflict)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
+    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
+  ),
+  void *pCtx                      /* First argument passed to xConflict */
+);
+
+/*
+** CAPI3REF: Constants Passed To The Conflict Handler
+**
+** Values that may be passed as the second argument to a conflict-handler.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_DATA<dd>
+**   The conflict handler is invoked with CHANGESET_DATA as the second argument
+**   when processing a DELETE or UPDATE change if a row with the required
+**   PRIMARY KEY fields is present in the database, but one or more other
+**   (non primary-key) fields modified by the update do not contain the
+**   expected "before" values.
+**
+**   The conflicting row, in this case, is the database row with the matching
+**   primary key.
+**
+** <dt>SQLITE_CHANGESET_NOTFOUND<dd>
+**   The conflict handler is invoked with CHANGESET_NOTFOUND as the second
+**   argument when processing a DELETE or UPDATE change if a row with the
+**   required PRIMARY KEY fields is not present in the database.
+**
+**   There is no conflicting row in this case. The results of invoking the
+**   sqlite3changeset_conflict() API are undefined.
+**
+** <dt>SQLITE_CHANGESET_CONFLICT<dd>
+**   CHANGESET_CONFLICT is passed as the second argument to the conflict
+**   handler while processing an INSERT change if the operation would result
+**   in duplicate primary key values.
+**
+**   The conflicting row in this case is the database row with the matching
+**   primary key.
+**
+** <dt>SQLITE_CHANGESET_FOREIGN_KEY<dd>
+**   If foreign key handling is enabled, and applying a changeset leaves the
+**   database in a state containing foreign key violations, the conflict
+**   handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
+**   exactly once before the changeset is committed. If the conflict handler
+**   returns CHANGESET_OMIT, the changes, including those that caused the
+**   foreign key constraint violation, are committed. Or, if it returns
+**   CHANGESET_ABORT, the changeset is rolled back.
+**
+**   No current or conflicting row information is provided. The only function
+**   it is possible to call on the supplied sqlite3_changeset_iter handle
+**   is sqlite3changeset_fk_conflicts().
+**
+** <dt>SQLITE_CHANGESET_CONSTRAINT<dd>
+**   If any other constraint violation occurs while applying a change (i.e.
+**   a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
+**   invoked with CHANGESET_CONSTRAINT as the second argument.
+**
+**   There is no conflicting row in this case. The results of invoking the
+**   sqlite3changeset_conflict() API are undefined.
+**
+** </dl>
+*/
+#define SQLITE_CHANGESET_DATA        1
+#define SQLITE_CHANGESET_NOTFOUND    2
+#define SQLITE_CHANGESET_CONFLICT    3
+#define SQLITE_CHANGESET_CONSTRAINT  4
+#define SQLITE_CHANGESET_FOREIGN_KEY 5
+
+/*
+** CAPI3REF: Constants Returned By The Conflict Handler
+**
+** A conflict handler callback must return one of the following three values.
+**
+** <dl>
+** <dt>SQLITE_CHANGESET_OMIT<dd>
+**   If a conflict handler returns this value no special action is taken. The
+**   change that caused the conflict is not applied. The session module
+**   continues to the next change in the changeset.
+**
+** <dt>SQLITE_CHANGESET_REPLACE<dd>
+**   This value may only be returned if the second argument to the conflict
+**   handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
+**   is not the case, any changes applied so far are rolled back and the
+**   call to sqlite3changeset_apply() returns SQLITE_MISUSE.
+**
+**   If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
+**   handler, then the conflicting row is either updated or deleted, depending
+**   on the type of change.
+**
+**   If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
+**   handler, then the conflicting row is removed from the database and a
+**   second attempt to apply the change is made. If this second attempt fails,
+**   the original row is restored to the database before continuing.
+**
+** <dt>SQLITE_CHANGESET_ABORT<dd>
+**   If this value is returned, any changes applied so far are rolled back
+**   and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
+** </dl>
+*/
+#define SQLITE_CHANGESET_OMIT       0
+#define SQLITE_CHANGESET_REPLACE    1
+#define SQLITE_CHANGESET_ABORT      2
+
+/*
+** CAPI3REF: Streaming Versions of API functions.
+**
+** The six streaming API xxx_strm() functions serve similar purposes to the
+** corresponding non-streaming API functions:
+**
+** <table border=1 style="margin-left:8ex;margin-right:8ex">
+**   <tr><th>Streaming function<th>Non-streaming equivalent</th>
+**   <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply]
+**   <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat]
+**   <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert]
+**   <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start]
+**   <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset]
+**   <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset]
+** </table>
+**
+** Non-streaming functions that accept changesets (or patchsets) as input
+** require that the entire changeset be stored in a single buffer in memory.
+** Similarly, those that return a changeset or patchset do so by returning
+** a pointer to a single large buffer allocated using sqlite3_malloc().
+** Normally this is convenient. However, if an application running in a
+** low-memory environment is required to handle very large changesets, the
+** large contiguous memory allocations required can become onerous.
+**
+** In order to avoid this problem, instead of a single large buffer, input
+** is passed to a streaming API functions by way of a callback function that
+** the sessions module invokes to incrementally request input data as it is
+** required. In all cases, a pair of API function parameters such as
+**
+**  <pre>
+**  &nbsp;     int nChangeset,
+**  &nbsp;     void *pChangeset,
+**  </pre>
+**
+** Is replaced by:
+**
+**  <pre>
+**  &nbsp;     int (*xInput)(void *pIn, void *pData, int *pnData),
+**  &nbsp;     void *pIn,
+**  </pre>
+**
+** Each time the xInput callback is invoked by the sessions module, the first
+** argument passed is a copy of the supplied pIn context pointer. The second
+** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
+** error occurs the xInput method should copy up to (*pnData) bytes of data
+** into the buffer and set (*pnData) to the actual number of bytes copied
+** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
+** should be set to zero to indicate this. Or, if an error occurs, an SQLite
+** error code should be returned. In all cases, if an xInput callback returns
+** an error, all processing is abandoned and the streaming API function
+** returns a copy of the error code to the caller.
+**
+** In the case of sqlite3changeset_start_strm(), the xInput callback may be
+** invoked by the sessions module at any point during the lifetime of the
+** iterator. If such an xInput callback returns an error, the iterator enters
+** an error state, whereby all subsequent calls to iterator functions
+** immediately fail with the same error code as returned by xInput.
+**
+** Similarly, streaming API functions that return changesets (or patchsets)
+** return them in chunks by way of a callback function instead of via a
+** pointer to a single large buffer. In this case, a pair of parameters such
+** as:
+**
+**  <pre>
+**  &nbsp;     int *pnChangeset,
+**  &nbsp;     void **ppChangeset,
+**  </pre>
+**
+** Is replaced by:
+**
+**  <pre>
+**  &nbsp;     int (*xOutput)(void *pOut, const void *pData, int nData),
+**  &nbsp;     void *pOut
+**  </pre>
+**
+** The xOutput callback is invoked zero or more times to return data to
+** the application. The first parameter passed to each call is a copy of the
+** pOut pointer supplied by the application. The second parameter, pData,
+** points to a buffer nData bytes in size containing the chunk of output
+** data being returned. If the xOutput callback successfully processes the
+** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
+** it should return some other SQLite error code. In this case processing
+** is immediately abandoned and the streaming API function returns a copy
+** of the xOutput error code to the application.
+**
+** The sessions module never invokes an xOutput callback with the third
+** parameter set to a value less than or equal to zero. Other than this,
+** no guarantees are made as to the size of the chunks of data returned.
+*/
+SQLITE_API int sqlite3changeset_apply_strm(
+  sqlite3 *db,                    /* Apply change to "main" db of this handle */
+  int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
+  void *pIn,                                          /* First arg for xInput */
+  int(*xFilter)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    const char *zTab              /* Table name */
+  ),
+  int(*xConflict)(
+    void *pCtx,                   /* Copy of sixth arg to _apply() */
+    int eConflict,                /* DATA, MISSING, CONFLICT, CONSTRAINT */
+    sqlite3_changeset_iter *p     /* Handle describing change and conflict */
+  ),
+  void *pCtx                      /* First argument passed to xConflict */
+);
+SQLITE_API int sqlite3changeset_concat_strm(
+  int (*xInputA)(void *pIn, void *pData, int *pnData),
+  void *pInA,
+  int (*xInputB)(void *pIn, void *pData, int *pnData),
+  void *pInB,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3changeset_invert_strm(
+  int (*xInput)(void *pIn, void *pData, int *pnData),
+  void *pIn,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3changeset_start_strm(
+  sqlite3_changeset_iter **pp,
+  int (*xInput)(void *pIn, void *pData, int *pnData),
+  void *pIn
+);
+SQLITE_API int sqlite3session_changeset_strm(
+  sqlite3_session *pSession,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3session_patchset_strm(
+  sqlite3_session *pSession,
+  int (*xOutput)(void *pOut, const void *pData, int nData),
+  void *pOut
+);
+SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*,
+    int (*xInput)(void *pIn, void *pData, int *pnData),
+    void *pIn
+);
+SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*,
+    int (*xOutput)(void *pOut, const void *pData, int nData),
+    void *pOut
+);
+
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+}
+#endif
+
+#endif  /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */
+
+/******** End of sqlite3session.h *********/
+/******** Begin file fts5.h *********/
 /*
 ** 2014 May 31
 **
@@ -8006,6 +10230,9 @@ struct Fts5PhraseIter {
 **   an OOM condition or IO error), an appropriate SQLite error code is 
 **   returned.
 **
+**   This function may be quite inefficient if used with an FTS5 table
+**   created with the "columnsize=0" option.
+**
 ** xColumnText:
 **   This function attempts to retrieve the text of column iCol of the
 **   current document. If successful, (*pz) is set to point to a buffer
@@ -8026,15 +10253,29 @@ struct Fts5PhraseIter {
 **   the query within the current row. Return SQLITE_OK if successful, or
 **   an error code (i.e. SQLITE_NOMEM) if an error occurs.
 **
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. If the FTS5 table is created
+**   with either "detail=none" or "detail=column" and "content=" option
+**   (i.e. if it is a contentless table), then this API always returns 0.
+**
 ** xInst:
 **   Query for the details of phrase match iIdx within the current row.
 **   Phrase matches are numbered starting from zero, so the iIdx argument
 **   should be greater than or equal to zero and smaller than the value
 **   output by xInstCount().
 **
+**   Usually, output parameter *piPhrase is set to the phrase number, *piCol
+**   to the column in which it occurs and *piOff the token offset of the
+**   first token of the phrase. The exception is if the table was created
+**   with the offsets=0 option specified. In this case *piOff is always
+**   set to -1.
+**
 **   Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM) 
 **   if an error occurs.
 **
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option.
+**
 ** xRowid:
 **   Returns the rowid of the current row.
 **
@@ -8048,11 +10289,13 @@ struct Fts5PhraseIter {
 **       ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
 **
 **   with $p set to a phrase equivalent to the phrase iPhrase of the
-**   current query is executed. For each row visited, the callback function
-**   passed as the fourth argument is invoked. The context and API objects 
-**   passed to the callback function may be used to access the properties of
-**   each matched row. Invoking Api.xUserData() returns a copy of the pointer
-**   passed as the third argument to pUserData.
+**   current query is executed. Any column filter that applies to
+**   phrase iPhrase of the current query is included in $p. For each
+**   row visited, the callback function passed as the fourth argument
+**   is invoked. The context and API objects passed to the callback
+**   function may be used to access the properties of each matched row.
+**   Invoking Api.xUserData() returns a copy of the pointer passed as
+**   the third argument to pUserData.
 **
 **   If the callback function returns any value other than SQLITE_OK, the
 **   query is abandoned and the xQueryPhrase function returns immediately.
@@ -8118,7 +10361,7 @@ struct Fts5PhraseIter {
 **       Fts5PhraseIter iter;
 **       int iCol, iOff;
 **       for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
-**           iOff>=0;
+**           iCol>=0;
 **           pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
 **       ){
 **         // An instance of phrase iPhrase at offset iOff of column iCol
@@ -8126,13 +10369,51 @@ struct Fts5PhraseIter {
 **
 **   The Fts5PhraseIter structure is defined above. Applications should not
 **   modify this structure directly - it should only be used as shown above
-**   with the xPhraseFirst() and xPhraseNext() API methods.
+**   with the xPhraseFirst() and xPhraseNext() API methods (and by
+**   xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" or "detail=column" option. If the FTS5 table is created
+**   with either "detail=none" or "detail=column" and "content=" option
+**   (i.e. if it is a contentless table), then this API always iterates
+**   through an empty set (all calls to xPhraseFirst() set iCol to -1).
 **
 ** xPhraseNext()
 **   See xPhraseFirst above.
+**
+** xPhraseFirstColumn()
+**   This function and xPhraseNextColumn() are similar to the xPhraseFirst()
+**   and xPhraseNext() APIs described above. The difference is that instead
+**   of iterating through all instances of a phrase in the current row, these
+**   APIs are used to iterate through the set of columns in the current row
+**   that contain one or more instances of a specified phrase. For example:
+**
+**       Fts5PhraseIter iter;
+**       int iCol;
+**       for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
+**           iCol>=0;
+**           pApi->xPhraseNextColumn(pFts, &iter, &iCol)
+**       ){
+**         // Column iCol contains at least one instance of phrase iPhrase
+**       }
+**
+**   This API can be quite slow if used with an FTS5 table created with the
+**   "detail=none" option. If the FTS5 table is created with either
+**   "detail=none" "content=" option (i.e. if it is a contentless table),
+**   then this API always iterates through an empty set (all calls to
+**   xPhraseFirstColumn() set iCol to -1).
+**
+**   The information accessed using this API and its companion
+**   xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
+**   (or xInst/xInstCount). The chief advantage of this API is that it is
+**   significantly more efficient than those alternatives when used with
+**   "detail=column" tables.
+**
+** xPhraseNextColumn()
+**   See xPhraseFirstColumn above.
 */
 struct Fts5ExtensionApi {
-  int iVersion;                   /* Currently always set to 1 */
+  int iVersion;                   /* Currently always set to 3 */
 
   void *(*xUserData)(Fts5Context*);
 
@@ -8162,8 +10443,11 @@ struct Fts5ExtensionApi {
   int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
   void *(*xGetAuxdata)(Fts5Context*, int bClear);
 
-  void (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
+  int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
   void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
+
+  int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
+  void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
 };
 
 /* 
@@ -8180,7 +10464,7 @@ struct Fts5ExtensionApi {
 ** behaviour. The structure methods are expected to function as follows:
 **
 ** xCreate:
-**   This function is used to allocate and inititalize a tokenizer instance.
+**   This function is used to allocate and initialize a tokenizer instance.
 **   A tokenizer instance is required to actually tokenize text.
 **
 **   The first argument passed to this function is a copy of the (void*)
@@ -8440,4 +10724,4 @@ struct fts5_api {
 
 #endif /* _FTS5_H */
 
-
+/******** End of fts5.h *********/