albacore 1.0.0.rc.2 → 1.0.0.rc.3

data/spec/ndepend_spec.rb

@@ -1,72 +1,26 @@
-require 'spec_helper'
-require 'albacore/ndepend'
-require 'albacore/msbuild'
-
-describe "when executing Ndepend console" do
-  before :all do
-    @msbuild = MSBuild.new
-    @msbuild.properties = {:configuration => :Debug}
-    @msbuild.targets = [:Clean, :Build]
-    @msbuild.solution = "spec/support/TestSolution/TestSolution.sln"
-    @msbuild.execute
-  end
-  before :each do
-    @ndepend = NDepend.new
-    @ndepend.log_device = StringIO.new
-    @ndepend.project_file = "spec/support/TestSolution/NDependProject.xml"
-    @ndepend.command = "spec/support/tools/Ndepend-v2.12/NDepend.Console.exe"
-
-    @logger = StringIO.new
-    @ndepend.log_device = @logger
-    @log_data = @logger.string
-    @ndepend.log_level = :verbose
-
-
-  end
-  it "should execute NdependConsole.exe"do
-    @ndepend.execute
-
-    @log_data.should include("NDepend.Console.exe" )
-  end
-
-  it "should include the Ndepend project file" do
-    @ndepend.execute
-    @log_data.should include("NDependProject.xml")
-  end
-
-  it "should fail when the project file is not given" do
-    @ndepend.project_file = nil
-    @ndepend.extend(FailPatch)
-    @ndepend.execute
-    $task_failed.should be_true
-  end
-
-  it "should accept other parameters" do
-    expected_params = "/ViewReport /Silent /Help"
-    @ndepend.parameters expected_params
-    @ndepend.extend(FailPatch)
-    @ndepend.execute
-    @log_data.should include(expected_params)
-  end
-
-  it "should order command line properly by including ndepend project file first" do
-    expected_params = "/Help"
-    @ndepend.parameters expected_params
-    @ndepend.extend(FailPatch)
-    @ndepend.execute
-    @log_data.should =~ /.*NDepend.Console.exe.*NDependProject.xml.*Help.*/
-  end
-end
-
-describe NDepend, "when providing configuration" do
-  let :ndepend do
-    Albacore.configure do |config|
-      config.ndepend.command = "configured"
-    end
-    ndepend = NDepend.new
-  end
-
-  it "should use the configured values" do
-    ndepend.command.should == "configured"
-  end
-end
+require "spec_helper"
+
+describe NDepend do
+  subject(:task) do
+    task = NDepend.new()
+    task.extend(SystemPatch)
+    task.command = "ndepend"
+    task.project_file = "projectfile"
+    task
+  end
+
+  let(:cmd) { task.system_command }
+
+  before :each do
+    task.execute
+  end
+
+  it "should use the command" do
+    cmd.should include("ndepend")
+  end
+
+  # Bad! How do I stub File.expand_path? Or use the albacore.rb file?
+  it "should use the project file" do
+    cmd.should include("\"#{File.expand_path("projectfile")}\"")
+  end
+end

data/spec/netversion_spec.rb

@@ -1,53 +1,51 @@
-require 'spec_helper'
-require 'albacore/config/netversion'
-
-class NetVersionTest
-  include Configuration::NetVersion
-end
-
-describe :NetVersion, 'when getting the win_dir' do
-  before do
-    @subject = NetVersionTest.new
-    @win_dir = @subject.win_dir
-  end
-  
-  it 'should be in the system path' do
-    @win_dir.upcase.should eq 'C:\\WINDOWS'
-  end
-end
-
-describe :NetVersion, 'when getting the net version' do
-  before do
-    @subject = NetVersionTest.new
-  end
-  
-  it 'should have v2.0' do
-    @subject.get_net_version(:net2).should include 'v2.0'
-  end
-  
-  it 'should have v3.0' do
-    @subject.get_net_version(:net3).should include 'v2.0'
-  end
-  
-  it 'should have v3.5' do
-    @subject.get_net_version(:net35).should include 'v3.5'
-  end
-  
-  it 'should have v4.0' do
-    @subject.get_net_version(:net4).should include 'v4.0'
-  end
-  
-  it 'should have v4.5' do
-    @subject.get_net_version(:net45).should include 'v4.0'
-  end
-end
-
-describe :NetVersion, 'when getting an unsupported net version' do
-  before do 
-    @subject = NetVersionTest.new
-  end
-  
-  it 'should fail' do
-    lambda { @subject.get_net_version :fake }.should raise_error
-  end
-end
+require "spec_helper"
+
+class NetVersionTester
+  include Configuration::NetVersion
+end
+
+describe :NetVersion, "when getting the win_dir" do
+  before :each do
+    @subject = NetVersionTester.new()
+  end
+
+  it "should be in the system path" do
+    @subject.win_dir.upcase.should eq("C:\\WINDOWS")
+  end
+end
+
+describe :NetVersion, "when getting the net version" do
+  before :each do
+    @subject = NetVersionTester.new()
+  end
+  
+  it "should have v2.0" do
+    @subject.get_net_version(:net2).should include("v2.0")
+  end
+  
+  it "should have v3.0" do
+    @subject.get_net_version(:net3).should include("v2.0")
+  end
+  
+  it "should have v3.5" do
+    @subject.get_net_version(:net35).should include("v3.5")
+  end
+  
+  it "should have v4.0" do
+    @subject.get_net_version(:net4).should include("v4.0")
+  end
+  
+  it "should have v4.5" do
+    @subject.get_net_version(:net45).should include("v4.0")
+  end
+end
+
+describe :NetVersion, "when getting an unsupported net version" do
+  before :each do
+    @subject = NetVersionTester.new()
+  end
+  
+  it "should fail" do
+    lambda { @subject.get_net_version :fake }.should raise_error
+  end
+end

data/spec/nugetinstall_spec.rb

@@ -1,47 +1,59 @@
-require 'spec_helper'
-require 'albacore/nugetinstall'
-
-describe NuGetInstall do  
-  before :each do
-    @nugetinstall = NuGetInstall.new
-    @strio = StringIO.new
-    @nugetinstall.log_device = @strio
-    @nugetinstall.log_level = :diagnostic
-  end
-
-  context "when no path to NuGet is specified" do
-    it "assumes NuGet is in the path" do
-      @nugetinstall.command.should == "NuGet.exe"
-    end
-  end
-
-  it "generates the correct command-line parameters" do
-    @nugetinstall.package = "Hircine"
-    @nugetinstall.sources = "source1", "source2"
-    @nugetinstall.version = "0.1.1-pre"
-    @nugetinstall.no_cache = false
-    @nugetinstall.prerelease = true
-    @nugetinstall.exclude_version = true
-    @nugetinstall.output_directory = "customdir"
-    
-    params = @nugetinstall.generate_params
-    params.should include("install")
-    params.should include(@nugetinstall.package)
-    params.should include("-Version 0.1.1-pre")
-    params.should include("-Source \"source1;source2\"")
-    params.should include("-OutputDirectory customdir")
-    params.should include("-ExcludeVersion")
-    params.should include("-Prerelease")
-    params.should_not include("-NoCache")
-    
-    @nugetinstall.no_cache = true
-    params = @nugetinstall.generate_params
-    params.should include("-NoCache")
-  end
-
-  it "fails if no package is specified" do
-  	@nugetinstall.extend(FailPatch)
-  	@nugetinstall.generate_params
-  	@strio.string.should include('A NuGet package must be specified.')
-  end
-end
+require "spec_helper"
+
+describe NuGetInstall do  
+  subject(:task) do
+    task = NuGetInstall.new()
+    task.extend(SystemPatch)
+    task.command = "nuget"
+    task.package = "Hircine"
+    task.sources = ["source1", "source2"]
+    task.version = "0.1.1-pre"
+    task.output_directory = "customdir"
+    task.no_cache
+    task.prerelease
+    task.exclude_version
+    task
+  end
+
+  let(:cmd) { task.system_command }
+
+  before :each do
+    task.execute
+  end
+
+  it "should use the command" do
+    cmd.should include("nuget")
+  end
+
+  it "should use the subcommand" do
+    cmd.should include("install")
+  end
+
+  it "should use the package" do
+    cmd.should include("Hircine")
+  end
+
+  it "should set the version" do
+    cmd.should include("-Version 0.1.1-pre")
+  end
+    
+  it "should use the sources" do
+    cmd.should include("-Source \"source1;source2\"")
+  end
+
+  it "should use the output directory" do
+    cmd.should include("-OutputDirectory \"customdir\"")
+  end
+
+  it "should exclude the version" do
+    cmd.should include("-ExcludeVersion")
+  end
+
+  it "should be a pre release" do
+    cmd.should include("-Prerelease")
+  end
+
+  it "should not cache" do
+    cmd.should include("-NoCache")
+  end
+end

data/spec/nugetpack_spec.rb

@@ -0,0 +1,49 @@
+require "spec_helper" 
+
+describe NuGetPack do
+  subject(:task) do
+    task = NuGetPack.new()
+    task.extend(SystemPatch)
+    task.command = "nuget"
+    task.nuspec = "nuspec"
+    task.output_directory = "out/package"
+    task.base_path = "bin/Release"
+    task.properties = {:foo => "foo", :bar => "bar"}
+    task.symbols
+    task
+  end
+
+  let(:cmd) { task.system_command }
+
+  before :each do
+    task.execute
+  end
+  
+  it "should set the command" do 
+    cmd.should include("nuget")
+  end
+
+  it "should set the subcommand" do 
+    cmd.should include("pack")
+  end
+  
+  it "should set the nuspec" do
+    cmd.should include("\"nuspec\"")
+  end
+  
+  it "should set the output path" do
+    cmd.should include("-OutputDirectory \"out/package\"")
+  end
+  
+  it "should set the base folder path" do
+    cmd.should include("-BasePath \"bin/Release\"")
+  end
+  
+  it "should set the properties" do
+    cmd.should include("-Properties foo=\"foo\";bar=\"bar\"")
+  end
+  
+  it "should make a symbols package" do
+    cmd.should include("-Symbols")
+  end
+end

data/spec/nugetpush_spec.rb

@@ -0,0 +1,39 @@
+require "spec_helper"
+
+describe NuGetPack do
+  subject(:task) do
+    task = NuGetPush.new()
+    task.extend(SystemPatch)
+    task.command = "nuget"
+    task.package = "package"
+    task.api_key = "apikey"
+    task.source = "source"
+    task
+  end
+
+  let(:cmd) { task.system_command }
+
+  before :each do
+    task.execute
+  end
+  
+  it "should set the command" do 
+    cmd.should include("nuget")
+  end
+
+  it "should set the subcommand" do 
+    cmd.should include("push")
+  end 
+  
+  it "should set the package" do 
+    cmd.should include("\"package\"")
+  end 
+
+  it "should set the apikey" do 
+    cmd.should include("apikey")
+  end 
+  
+  it "should set the source" do 
+    cmd.should include("-Source source")
+  end 
+end

data/spec/nugetupdate_spec.rb

@@ -1,42 +1,49 @@
-require 'spec_helper'
-require 'albacore/nugetupdate'
-require 'albacore/config/nugetupdateconfig'
-
-describe NuGetUpdate do  
-  before :each do
-    @nugetupdate = NuGetUpdate.new
-    @strio = StringIO.new
-    @nugetupdate.log_device = @strio
-    @nugetupdate.log_level = :diagnostic
-  end
-  
-  context "when no path to NuGet is specified" do
-    it "assumes NuGet is in the path" do
-      @nugetupdate.command.should == "NuGet.exe"
-    end
-  end
-
-  it "generates the correct command-line parameters" do
-    @nugetupdate.input_file = "../support/TestSolution/TestSolution.sln"
-    @nugetupdate.source = "source1", "source2"
-    @nugetupdate.id = "id1", "id2"
-    @nugetupdate.repository_path = "repopath"
-    
-    params = @nugetupdate.get_command_parameters
-    params.should include(@nugetupdate.input_file)
-    params.should include("-Source \"source1;source2\"")
-    params.should include("-Id \"id1;id2\"")
-    params.should include("-RepositoryPath repopath")
-    params.should_not include("-Self")
-    
-    @nugetupdate.safe = true
-    params = @nugetupdate.get_command_parameters
-    params.should include("-Safe")
-  end
-  
-  it "fails if no input file is supplied" do
-    @nugetupdate.extend(FailPatch)
-    @nugetupdate.get_command_parameters
-    @strio.string.should include("An input file must be specified")
-  end
-end
+require "spec_helper"
+
+describe NuGetUpdate do  
+  subject(:task) do
+    task = NuGetUpdate.new()
+    task.extend(SystemPatch)
+    task.command = "nuget"
+    task.input_file = "TestSolution.sln"
+    task.source = ["source1", "source2"]
+    task.id = ["id1", "id2"]
+    task.repository_path = "repopath"
+    task.safe
+    task
+  end
+
+  let(:cmd) { task.system_command }
+
+  before :each do
+    task.execute
+  end
+
+  it "should use the command" do
+    cmd.should include("nuget")
+  end
+  
+  it "should use the subcommand" do
+    cmd.should include("update")
+  end
+  
+  it "should use the input file" do
+    cmd.should include("\"TestSolution.sln\"")
+  end
+  
+  it "should use the sources" do
+    cmd.should include("-Source \"source1;source2\"")
+  end
+  
+  it "should use the ids" do
+    cmd.should include("-Id \"id1;id2\"")
+  end
+  
+  it "should use the repo path" do
+    cmd.should include("-RepositoryPath repopath")
+  end
+  
+  it "should be safe" do
+    cmd.should include("-Safe")
+  end
+end