activerecord 4.2.11 → 5.2.4.1

data/lib/active_record/connection_adapters/abstract/connection_pool.rb

@@ -1,8 +1,8 @@
-require 'thread'
-require 'thread_safe'
-require 'monitor'
-require 'set'
-require 'active_support/core_ext/string/filters'
+# frozen_string_literal: true
+
+require "thread"
+require "concurrent/map"
+require "monitor"
 
 module ActiveRecord
   # Raised when a connection could not be obtained within the connection
@@ -11,6 +11,13 @@ module ActiveRecord
   class ConnectionTimeoutError < ConnectionNotEstablished
   end
 
+  # Raised when a pool was unable to get ahold of all its connections
+  # to perform a "group" action such as
+  # {ActiveRecord::Base.connection_pool.disconnect!}[rdoc-ref:ConnectionAdapters::ConnectionPool#disconnect!]
+  # or {ActiveRecord::Base.clear_reloadable_connections!}[rdoc-ref:ConnectionAdapters::ConnectionHandler#clear_reloadable_connections!].
+  class ExclusiveConnectionTimeoutError < ConnectionTimeoutError
+  end
+
   module ConnectionAdapters
     # Connection pool base class for managing Active Record database
     # connections.
@@ -33,17 +40,18 @@ module ActiveRecord
     # Connections can be obtained and used from a connection pool in several
     # ways:
     #
-    # 1. Simply use ActiveRecord::Base.connection as with Active Record 2.1 and
+    # 1. Simply use {ActiveRecord::Base.connection}[rdoc-ref:ConnectionHandling.connection]
+    #    as with Active Record 2.1 and
     #    earlier (pre-connection-pooling). Eventually, when you're done with
     #    the connection(s) and wish it to be returned to the pool, you call
-    #    ActiveRecord::Base.clear_active_connections!. This will be the
-    #    default behavior for Active Record when used in conjunction with
+    #    {ActiveRecord::Base.clear_active_connections!}[rdoc-ref:ConnectionAdapters::ConnectionHandler#clear_active_connections!].
+    #    This will be the default behavior for Active Record when used in conjunction with
     #    Action Pack's request handling cycle.
     # 2. Manually check out a connection from the pool with
-    #    ActiveRecord::Base.connection_pool.checkout. You are responsible for
+    #    {ActiveRecord::Base.connection_pool.checkout}[rdoc-ref:#checkout]. You are responsible for
     #    returning this connection to the pool when finished by calling
-    #    ActiveRecord::Base.connection_pool.checkin(connection).
-    # 3. Use ActiveRecord::Base.connection_pool.with_connection(&block), which
+    #    {ActiveRecord::Base.connection_pool.checkin(connection)}[rdoc-ref:#checkin].
+    # 3. Use {ActiveRecord::Base.connection_pool.with_connection(&block)}[rdoc-ref:#with_connection], which
     #    obtains a connection, yields it as the sole argument to the block,
     #    and returns it to the pool after the block completes.
     #
@@ -55,21 +63,25 @@ module ActiveRecord
     # There are several connection-pooling-related options that you can add to
     # your database connection configuration:
     #
-    # * +pool+: number indicating size of connection pool (default 5)
-    # * +checkout_timeout+: number of seconds to block and wait for a connection
-    #   before giving up and raising a timeout error (default 5 seconds).
-    # * +reaping_frequency+: frequency in seconds to periodically run the
-    #   Reaper, which attempts to find and recover connections from dead
-    #   threads, which can occur if a programmer forgets to close a
-    #   connection at the end of a thread or a thread dies unexpectedly.
-    #   Regardless of this setting, the Reaper will be invoked before every
-    #   blocking wait. (Default nil, which means don't schedule the Reaper).
+    # * +pool+: maximum number of connections the pool may manage (default 5).
+    # * +idle_timeout+: number of seconds that a connection will be kept
+    #   unused in the pool before it is automatically disconnected (default
+    #   300 seconds). Set this to zero to keep connections forever.
+    # * +checkout_timeout+: number of seconds to wait for a connection to
+    #   become available before giving up and raising a timeout error (default
+    #   5 seconds).
+    #
+    #--
+    # Synchronization policy:
+    # * all public methods can be called outside +synchronize+
+    # * access to these instance variables needs to be in +synchronize+:
+    #   * @connections
+    #   * @now_connecting
+    # * private methods that require being called in a +synchronize+ blocks
+    #   are now explicitly documented
     class ConnectionPool
-      # Threadsafe, fair, FIFO queue.  Meant to be used by ConnectionPool
-      # with which it shares a Monitor.  But could be a generic Queue.
-      #
-      # The Queue in stdlib's 'thread' could replace this class except
-      # stdlib's doesn't support waiting with a timeout.
+      # Threadsafe, fair, LIFO queue.  Meant to be used by ConnectionPool
+      # with which it shares a Monitor.
       class Queue
         def initialize(lock = Monitor.new)
           @lock = lock
@@ -101,7 +113,7 @@ module ActiveRecord
           end
         end
 
-        # If +element+ is in the queue, remove and return it, or nil.
+        # If +element+ is in the queue, remove and return it, or +nil+.
         def delete(element)
           synchronize do
             @queue.delete(element)
@@ -120,86 +132,160 @@ module ActiveRecord
         # If +timeout+ is not given, remove and return the head the
         # queue if the number of available elements is strictly
         # greater than the number of threads currently waiting (that
-        # is, don't jump ahead in line).  Otherwise, return nil.
+        # is, don't jump ahead in line).  Otherwise, return +nil+.
         #
-        # If +timeout+ is given, block if it there is no element
+        # If +timeout+ is given, block if there is no element
         # available, waiting up to +timeout+ seconds for an element to
         # become available.
         #
         # Raises:
-        # - ConnectionTimeoutError if +timeout+ is given and no element
-        # becomes available after +timeout+ seconds,
+        # - ActiveRecord::ConnectionTimeoutError if +timeout+ is given and no element
+        # becomes available within +timeout+ seconds,
         def poll(timeout = nil)
-          synchronize do
-            if timeout
-              no_wait_poll || wait_poll(timeout)
-            else
-              no_wait_poll
-            end
-          end
+          synchronize { internal_poll(timeout) }
         end
 
         private
 
-        def synchronize(&block)
-          @lock.synchronize(&block)
-        end
+          def internal_poll(timeout)
+            no_wait_poll || (timeout && wait_poll(timeout))
+          end
 
-        # Test if the queue currently contains any elements.
-        def any?
-          !@queue.empty?
-        end
+          def synchronize(&block)
+            @lock.synchronize(&block)
+          end
 
-        # A thread can remove an element from the queue without
-        # waiting if an only if the number of currently available
-        # connections is strictly greater than the number of waiting
-        # threads.
-        def can_remove_no_wait?
-          @queue.size > @num_waiting
-        end
+          # Test if the queue currently contains any elements.
+          def any?
+            !@queue.empty?
+          end
 
-        # Removes and returns the head of the queue if possible, or nil.
-        def remove
-          @queue.shift
-        end
+          # A thread can remove an element from the queue without
+          # waiting if and only if the number of currently available
+          # connections is strictly greater than the number of waiting
+          # threads.
+          def can_remove_no_wait?
+            @queue.size > @num_waiting
+          end
 
-        # Remove and return the head the queue if the number of
-        # available elements is strictly greater than the number of
-        # threads currently waiting.  Otherwise, return nil.
-        def no_wait_poll
-          remove if can_remove_no_wait?
-        end
+          # Removes and returns the head of the queue if possible, or +nil+.
+          def remove
+            @queue.pop
+          end
 
-        # Waits on the queue up to +timeout+ seconds, then removes and
-        # returns the head of the queue.
-        def wait_poll(timeout)
-          @num_waiting += 1
+          # Remove and return the head the queue if the number of
+          # available elements is strictly greater than the number of
+          # threads currently waiting.  Otherwise, return +nil+.
+          def no_wait_poll
+            remove if can_remove_no_wait?
+          end
 
-          t0 = Time.now
-          elapsed = 0
-          loop do
-            @cond.wait(timeout - elapsed)
+          # Waits on the queue up to +timeout+ seconds, then removes and
+          # returns the head of the queue.
+          def wait_poll(timeout)
+            @num_waiting += 1
+
+            t0 = Time.now
+            elapsed = 0
+            loop do
+              ActiveSupport::Dependencies.interlock.permit_concurrent_loads do
+                @cond.wait(timeout - elapsed)
+              end
+
+              return remove if any?
+
+              elapsed = Time.now - t0
+              if elapsed >= timeout
+                msg = "could not obtain a connection from the pool within %0.3f seconds (waited %0.3f seconds); all pooled connections were in use" %
+                  [timeout, elapsed]
+                raise ConnectionTimeoutError, msg
+              end
+            end
+          ensure
+            @num_waiting -= 1
+          end
+      end
 
-            return remove if any?
+      # Adds the ability to turn a basic fair FIFO queue into one
+      # biased to some thread.
+      module BiasableQueue # :nodoc:
+        class BiasedConditionVariable # :nodoc:
+          # semantics of condition variables guarantee that +broadcast+, +broadcast_on_biased+,
+          # +signal+ and +wait+ methods are only called while holding a lock
+          def initialize(lock, other_cond, preferred_thread)
+            @real_cond = lock.new_cond
+            @other_cond = other_cond
+            @preferred_thread = preferred_thread
+            @num_waiting_on_real_cond = 0
+          end
 
-            elapsed = Time.now - t0
-            if elapsed >= timeout
-              msg = 'could not obtain a database connection within %0.3f seconds (waited %0.3f seconds)' %
-                [timeout, elapsed]
-              raise ConnectionTimeoutError, msg
-            end
+          def broadcast
+            broadcast_on_biased
+            @other_cond.broadcast
+          end
+
+          def broadcast_on_biased
+            @num_waiting_on_real_cond = 0
+            @real_cond.broadcast
           end
+
+          def signal
+            if @num_waiting_on_real_cond > 0
+              @num_waiting_on_real_cond -= 1
+              @real_cond
+            else
+              @other_cond
+            end.signal
+          end
+
+          def wait(timeout)
+            if Thread.current == @preferred_thread
+              @num_waiting_on_real_cond += 1
+              @real_cond
+            else
+              @other_cond
+            end.wait(timeout)
+          end
+        end
+
+        def with_a_bias_for(thread)
+          previous_cond = nil
+          new_cond      = nil
+          synchronize do
+            previous_cond = @cond
+            @cond = new_cond = BiasedConditionVariable.new(@lock, @cond, thread)
+          end
+          yield
         ensure
-          @num_waiting -= 1
+          synchronize do
+            @cond = previous_cond if previous_cond
+            new_cond.broadcast_on_biased if new_cond # wake up any remaining sleepers
+          end
         end
       end
 
-      # Every +frequency+ seconds, the reaper will call +reap+ on +pool+.
-      # A reaper instantiated with a nil frequency will never reap the
-      # connection pool.
+      # Connections must be leased while holding the main pool mutex. This is
+      # an internal subclass that also +.leases+ returned connections while
+      # still in queue's critical section (queue synchronizes with the same
+      # <tt>@lock</tt> as the main pool) so that a returned connection is already
+      # leased and there is no need to re-enter synchronized block.
+      class ConnectionLeasingQueue < Queue # :nodoc:
+        include BiasableQueue
+
+        private
+          def internal_poll(timeout)
+            conn = super
+            conn.lease if conn
+            conn
+          end
+      end
+
+      # Every +frequency+ seconds, the reaper will call +reap+ and +flush+ on
+      # +pool+. A reaper instantiated with a zero frequency will never reap
+      # the connection pool.
       #
-      # Configure the frequency by setting "reaping_frequency" in your
-      # database yaml file.
+      # Configure the frequency by setting +reaping_frequency+ in your database
+      # yaml file (default 60 seconds).
       class Reaper
         attr_reader :pool, :frequency
 
@@ -209,20 +295,22 @@ module ActiveRecord
         end
 
         def run
-          return unless frequency
+          return unless frequency && frequency > 0
           Thread.new(frequency, pool) { |t, p|
-            while true
+            loop do
               sleep t
               p.reap
+              p.flush
             end
           }
         end
       end
 
       include MonitorMixin
+      include QueryCache::ConnectionPoolConfiguration
 
-      attr_accessor :automatic_reconnect, :checkout_timeout
-      attr_reader :spec, :connections, :size, :reaper
+      attr_accessor :automatic_reconnect, :checkout_timeout, :schema_cache
+      attr_reader :spec, :size, :reaper
 
       # Creates a new ConnectionPool object. +spec+ is a ConnectionSpecification
       # object which describes database connection information (e.g. adapter,
@@ -236,62 +324,98 @@ module ActiveRecord
         @spec = spec
 
         @checkout_timeout = (spec.config[:checkout_timeout] && spec.config[:checkout_timeout].to_f) || 5
-        @reaper = Reaper.new(self, (spec.config[:reaping_frequency] && spec.config[:reaping_frequency].to_f))
-        @reaper.run
+        if @idle_timeout = spec.config.fetch(:idle_timeout, 300)
+          @idle_timeout = @idle_timeout.to_f
+          @idle_timeout = nil if @idle_timeout <= 0
+        end
 
         # default max pool size to 5
         @size = (spec.config[:pool] && spec.config[:pool].to_i) || 5
 
-        # The cache of reserved connections mapped to threads
-        @reserved_connections = ThreadSafe::Cache.new(:initial_capacity => @size)
+        # This variable tracks the cache of threads mapped to reserved connections, with the
+        # sole purpose of speeding up the +connection+ method. It is not the authoritative
+        # registry of which thread owns which connection. Connection ownership is tracked by
+        # the +connection.owner+ attr on each +connection+ instance.
+        # The invariant works like this: if there is mapping of <tt>thread => conn</tt>,
+        # then that +thread+ does indeed own that +conn+. However, an absence of a such
+        # mapping does not mean that the +thread+ doesn't own the said connection. In
+        # that case +conn.owner+ attr should be consulted.
+        # Access and modification of <tt>@thread_cached_conns</tt> does not require
+        # synchronization.
+        @thread_cached_conns = Concurrent::Map.new(initial_capacity: @size)
 
         @connections         = []
         @automatic_reconnect = true
 
-        @available = Queue.new self
+        # Connection pool allows for concurrent (outside the main +synchronize+ section)
+        # establishment of new connections. This variable tracks the number of threads
+        # currently in the process of independently establishing connections to the DB.
+        @now_connecting = 0
+
+        @threads_blocking_new_connections = 0
+
+        @available = ConnectionLeasingQueue.new self
+
+        @lock_thread = false
+
+        # +reaping_frequency+ is configurable mostly for historical reasons, but it could
+        # also be useful if someone wants a very low +idle_timeout+.
+        reaping_frequency = spec.config.fetch(:reaping_frequency, 60)
+        @reaper = Reaper.new(self, reaping_frequency && reaping_frequency.to_f)
+        @reaper.run
+      end
+
+      def lock_thread=(lock_thread)
+        if lock_thread
+          @lock_thread = Thread.current
+        else
+          @lock_thread = nil
+        end
       end
 
       # Retrieve the connection associated with the current thread, or call
       # #checkout to obtain one if necessary.
       #
       # #connection can be called any number of times; the connection is
-      # held in a hash keyed by the thread id.
+      # held in a cache keyed by a thread.
       def connection
-        # this is correctly done double-checked locking
-        # (ThreadSafe::Cache's lookups have volatile semantics)
-        @reserved_connections[current_connection_id] || synchronize do
-          @reserved_connections[current_connection_id] ||= checkout
-        end
+        @thread_cached_conns[connection_cache_key(current_thread)] ||= checkout
       end
 
-      # Is there an open connection that is being used for the current thread?
+      # Returns true if there is an open connection being used for the current thread.
+      #
+      # This method only works for connections that have been obtained through
+      # #connection or #with_connection methods. Connections obtained through
+      # #checkout will not be detected by #active_connection?
       def active_connection?
-        synchronize do
-          @reserved_connections.fetch(current_connection_id) {
-            return false
-          }.in_use?
-        end
+        @thread_cached_conns[connection_cache_key(current_thread)]
       end
 
       # Signal that the thread is finished with the current connection.
       # #release_connection releases the connection-thread association
       # and returns the connection to the pool.
-      def release_connection(with_id = current_connection_id)
-        synchronize do
-          conn = @reserved_connections.delete(with_id)
-          checkin conn if conn
+      #
+      # This method only works for connections that have been obtained through
+      # #connection or #with_connection methods, connections obtained through
+      # #checkout will not be automatically released.
+      def release_connection(owner_thread = Thread.current)
+        if conn = @thread_cached_conns.delete(connection_cache_key(owner_thread))
+          checkin conn
         end
       end
 
-      # If a connection already exists yield it to the block. If no connection
+      # If a connection obtained through #connection or #with_connection methods
+      # already exists yield it to the block. If no such connection
       # exists checkout a connection, yield it to the block, and checkin the
       # connection when finished.
       def with_connection
-        connection_id = current_connection_id
-        fresh_connection = true unless active_connection?
-        yield connection
+        unless conn = @thread_cached_conns[connection_cache_key(Thread.current)]
+          conn = connection
+          fresh_connection = true
+        end
+        yield conn
       ensure
-        release_connection(connection_id) if fresh_connection
+        release_connection if fresh_connection
       end
 
       # Returns true if a connection has already been opened.
@@ -299,37 +423,103 @@ module ActiveRecord
         synchronize { @connections.any? }
       end
 
+      # Returns an array containing the connections currently in the pool.
+      # Access to the array does not require synchronization on the pool because
+      # the array is newly created and not retained by the pool.
+      #
+      # However; this method bypasses the ConnectionPool's thread-safe connection
+      # access pattern. A returned connection may be owned by another thread,
+      # unowned, or by happen-stance owned by the calling thread.
+      #
+      # Calling methods on a connection without ownership is subject to the
+      # thread-safety guarantees of the underlying method. Many of the methods
+      # on connection adapter classes are inherently multi-thread unsafe.
+      def connections
+        synchronize { @connections.dup }
+      end
+
       # Disconnects all connections in the pool, and clears the pool.
-      def disconnect!
-        synchronize do
-          @reserved_connections.clear
-          @connections.each do |conn|
-            checkin conn
-            conn.disconnect!
+      #
+      # Raises:
+      # - ActiveRecord::ExclusiveConnectionTimeoutError if unable to gain ownership of all
+      #   connections in the pool within a timeout interval (default duration is
+      #   <tt>spec.config[:checkout_timeout] * 2</tt> seconds).
+      def disconnect(raise_on_acquisition_timeout = true)
+        with_exclusively_acquired_all_connections(raise_on_acquisition_timeout) do
+          synchronize do
+            @connections.each do |conn|
+              if conn.in_use?
+                conn.steal!
+                checkin conn
+              end
+              conn.disconnect!
+            end
+            @connections = []
+            @available.clear
           end
-          @connections = []
-          @available.clear
         end
       end
 
-      # Clears the cache which maps classes.
-      def clear_reloadable_connections!
+      # Disconnects all connections in the pool, and clears the pool.
+      #
+      # The pool first tries to gain ownership of all connections. If unable to
+      # do so within a timeout interval (default duration is
+      # <tt>spec.config[:checkout_timeout] * 2</tt> seconds), then the pool is forcefully
+      # disconnected without any regard for other connection owning threads.
+      def disconnect!
+        disconnect(false)
+      end
+
+      # Discards all connections in the pool (even if they're currently
+      # leased!), along with the pool itself. Any further interaction with the
+      # pool (except #spec and #schema_cache) is undefined.
+      #
+      # See AbstractAdapter#discard!
+      def discard! # :nodoc:
         synchronize do
-          @reserved_connections.clear
+          return if @connections.nil? # already discarded
           @connections.each do |conn|
-            checkin conn
-            conn.disconnect! if conn.requires_reloading?
-          end
-          @connections.delete_if do |conn|
-            conn.requires_reloading?
+            conn.discard!
           end
-          @available.clear
-          @connections.each do |conn|
-            @available.add conn
+          @connections = @available = @thread_cached_conns = nil
+        end
+      end
+
+      # Clears the cache which maps classes and re-connects connections that
+      # require reloading.
+      #
+      # Raises:
+      # - ActiveRecord::ExclusiveConnectionTimeoutError if unable to gain ownership of all
+      #   connections in the pool within a timeout interval (default duration is
+      #   <tt>spec.config[:checkout_timeout] * 2</tt> seconds).
+      def clear_reloadable_connections(raise_on_acquisition_timeout = true)
+        with_exclusively_acquired_all_connections(raise_on_acquisition_timeout) do
+          synchronize do
+            @connections.each do |conn|
+              if conn.in_use?
+                conn.steal!
+                checkin conn
+              end
+              conn.disconnect! if conn.requires_reloading?
+            end
+            @connections.delete_if(&:requires_reloading?)
+            @available.clear
           end
         end
       end
 
+      # Clears the cache which maps classes and re-connects connections that
+      # require reloading.
+      #
+      # The pool first tries to gain ownership of all connections. If unable to
+      # do so within a timeout interval (default duration is
+      # <tt>spec.config[:checkout_timeout] * 2</tt> seconds), then the pool forcefully
+      # clears the cache and reloads connections without any regard for other
+      # connection owning threads.
+      def clear_reloadable_connections!
+        clear_reloadable_connections(false)
+      end
+
       # Check-out a database connection from the pool, indicating that you want
       # to use it. You should call #checkin when you no longer need this.
       #
@@ -343,129 +533,361 @@ module ActiveRecord
       # Returns: an AbstractAdapter object.
       #
       # Raises:
-      # - ConnectionTimeoutError: no connection can be obtained from the pool.
-      def checkout
-        synchronize do
-          conn = acquire_connection
-          conn.lease
-          checkout_and_verify(conn)
-        end
+      # - ActiveRecord::ConnectionTimeoutError no connection can be obtained from the pool.
+      def checkout(checkout_timeout = @checkout_timeout)
+        checkout_and_verify(acquire_connection(checkout_timeout))
       end
 
       # Check-in a database connection back into the pool, indicating that you
       # no longer need this connection.
       #
       # +conn+: an AbstractAdapter object, which was obtained by earlier by
-      # calling +checkout+ on this pool.
+      # calling #checkout on this pool.
       def checkin(conn)
-        synchronize do
-          owner = conn.owner
-
-          conn._run_checkin_callbacks do
-            conn.expire
-          end
+        conn.lock.synchronize do
+          synchronize do
+            remove_connection_from_thread_cache conn
 
-          release conn, owner
+            conn._run_checkin_callbacks do
+              conn.expire
+            end
 
-          @available.add conn
+            @available.add conn
+          end
         end
       end
 
-      # Remove a connection from the connection pool.  The connection will
+      # Remove a connection from the connection pool. The connection will
       # remain open and active but will no longer be managed by this pool.
       def remove(conn)
+        needs_new_connection = false
+
         synchronize do
+          remove_connection_from_thread_cache conn
+
           @connections.delete conn
           @available.delete conn
 
-          release conn, conn.owner
-
-          @available.add checkout_new_connection if @available.any_waiting?
+          # @available.any_waiting? => true means that prior to removing this
+          # conn, the pool was at its max size (@connections.size == @size).
+          # This would mean that any threads stuck waiting in the queue wouldn't
+          # know they could checkout_new_connection, so let's do it for them.
+          # Because condition-wait loop is encapsulated in the Queue class
+          # (that in turn is oblivious to ConnectionPool implementation), threads
+          # that are "stuck" there are helpless. They have no way of creating
+          # new connections and are completely reliant on us feeding available
+          # connections into the Queue.
+          needs_new_connection = @available.any_waiting?
         end
+
+        # This is intentionally done outside of the synchronized section as we
+        # would like not to hold the main mutex while checking out new connections.
+        # Thus there is some chance that needs_new_connection information is now
+        # stale, we can live with that (bulk_make_new_connections will make
+        # sure not to exceed the pool's @size limit).
+        bulk_make_new_connections(1) if needs_new_connection
       end
 
-      # Recover lost connections for the pool.  A lost connection can occur if
+      # Recover lost connections for the pool. A lost connection can occur if
       # a programmer forgets to checkin a connection at the end of a thread
       # or a thread dies unexpectedly.
       def reap
         stale_connections = synchronize do
           @connections.select do |conn|
             conn.in_use? && !conn.owner.alive?
+          end.each do |conn|
+            conn.steal!
           end
         end
 
         stale_connections.each do |conn|
-          synchronize do
-            if conn.active?
-              conn.reset!
-              checkin conn
-            else
-              remove conn
-            end
+          if conn.active?
+            conn.reset!
+            checkin conn
+          else
+            remove conn
           end
         end
       end
 
-      private
+      # Disconnect all connections that have been idle for at least
+      # +minimum_idle+ seconds. Connections currently checked out, or that were
+      # checked in less than +minimum_idle+ seconds ago, are unaffected.
+      def flush(minimum_idle = @idle_timeout)
+        return if minimum_idle.nil?
 
-      # Acquire a connection by one of 1) immediately removing one
-      # from the queue of available connections, 2) creating a new
-      # connection if the pool is not at capacity, 3) waiting on the
-      # queue for a connection to become available.
-      #
-      # Raises:
-      # - ConnectionTimeoutError if a connection could not be acquired
-      def acquire_connection
-        if conn = @available.poll
-          conn
-        elsif @connections.size < @size
-          checkout_new_connection
-        else
-          reap
-          @available.poll(@checkout_timeout)
-        end
-      end
+        idle_connections = synchronize do
+          @connections.select do |conn|
+            !conn.in_use? && conn.seconds_idle >= minimum_idle
+          end.each do |conn|
+            conn.lease
 
-      def release(conn, owner)
-        thread_id = owner.object_id
+            @available.delete conn
+            @connections.delete conn
+          end
+        end
 
-        if @reserved_connections[thread_id] == conn
-          @reserved_connections.delete thread_id
+        idle_connections.each do |conn|
+          conn.disconnect!
         end
       end
 
-      def new_connection
-        Base.send(spec.adapter_method, spec.config)
+      # Disconnect all currently idle connections. Connections currently checked
+      # out are unaffected.
+      def flush!
+        reap
+        flush(-1)
       end
 
-      def current_connection_id #:nodoc:
-        Base.connection_id ||= Thread.current.object_id
+      def num_waiting_in_queue # :nodoc:
+        @available.num_waiting
       end
 
-      def checkout_new_connection
-        raise ConnectionNotEstablished unless @automatic_reconnect
-
-        c = new_connection
-        c.pool = self
-        @connections << c
-        c
+      # Return connection pool's usage statistic
+      # Example:
+      #
+      #    ActiveRecord::Base.connection_pool.stat # => { size: 15, connections: 1, busy: 1, dead: 0, idle: 0, waiting: 0, checkout_timeout: 5 }
+      def stat
+        synchronize do
+          {
+            size: size,
+            connections: @connections.size,
+            busy: @connections.count { |c| c.in_use? && c.owner.alive? },
+            dead: @connections.count { |c| c.in_use? && !c.owner.alive? },
+            idle: @connections.count { |c| !c.in_use? },
+            waiting: num_waiting_in_queue,
+            checkout_timeout: checkout_timeout
+          }
+        end
       end
 
-      def checkout_and_verify(c)
-        c._run_checkout_callbacks do
-          c.verify!
+      private
+        #--
+        # this is unfortunately not concurrent
+        def bulk_make_new_connections(num_new_conns_needed)
+          num_new_conns_needed.times do
+            # try_to_checkout_new_connection will not exceed pool's @size limit
+            if new_conn = try_to_checkout_new_connection
+              # make the new_conn available to the starving threads stuck @available Queue
+              checkin(new_conn)
+            end
+          end
+        end
+
+        #--
+        # From the discussion on GitHub:
+        #  https://github.com/rails/rails/pull/14938#commitcomment-6601951
+        # This hook-in method allows for easier monkey-patching fixes needed by
+        # JRuby users that use Fibers.
+        def connection_cache_key(thread)
+          thread
+        end
+
+        def current_thread
+          @lock_thread || Thread.current
+        end
+
+        # Take control of all existing connections so a "group" action such as
+        # reload/disconnect can be performed safely. It is no longer enough to
+        # wrap it in +synchronize+ because some pool's actions are allowed
+        # to be performed outside of the main +synchronize+ block.
+        def with_exclusively_acquired_all_connections(raise_on_acquisition_timeout = true)
+          with_new_connections_blocked do
+            attempt_to_checkout_all_existing_connections(raise_on_acquisition_timeout)
+            yield
+          end
+        end
+
+        def attempt_to_checkout_all_existing_connections(raise_on_acquisition_timeout = true)
+          collected_conns = synchronize do
+            # account for our own connections
+            @connections.select { |conn| conn.owner == Thread.current }
+          end
+
+          newly_checked_out = []
+          timeout_time      = Time.now + (@checkout_timeout * 2)
+
+          @available.with_a_bias_for(Thread.current) do
+            loop do
+              synchronize do
+                return if collected_conns.size == @connections.size && @now_connecting == 0
+                remaining_timeout = timeout_time - Time.now
+                remaining_timeout = 0 if remaining_timeout < 0
+                conn = checkout_for_exclusive_access(remaining_timeout)
+                collected_conns   << conn
+                newly_checked_out << conn
+              end
+            end
+          end
+        rescue ExclusiveConnectionTimeoutError
+          # <tt>raise_on_acquisition_timeout == false</tt> means we are directed to ignore any
+          # timeouts and are expected to just give up: we've obtained as many connections
+          # as possible, note that in a case like that we don't return any of the
+          # +newly_checked_out+ connections.
+
+          if raise_on_acquisition_timeout
+            release_newly_checked_out = true
+            raise
+          end
+        rescue Exception # if something else went wrong
+          # this can't be a "naked" rescue, because we have should return conns
+          # even for non-StandardErrors
+          release_newly_checked_out = true
+          raise
+        ensure
+          if release_newly_checked_out && newly_checked_out
+            # releasing only those conns that were checked out in this method, conns
+            # checked outside this method (before it was called) are not for us to release
+            newly_checked_out.each { |conn| checkin(conn) }
+          end
+        end
+
+        #--
+        # Must be called in a synchronize block.
+        def checkout_for_exclusive_access(checkout_timeout)
+          checkout(checkout_timeout)
+        rescue ConnectionTimeoutError
+          # this block can't be easily moved into attempt_to_checkout_all_existing_connections's
+          # rescue block, because doing so would put it outside of synchronize section, without
+          # being in a critical section thread_report might become inaccurate
+          msg = "could not obtain ownership of all database connections in #{checkout_timeout} seconds".dup
+
+          thread_report = []
+          @connections.each do |conn|
+            unless conn.owner == Thread.current
+              thread_report << "#{conn} is owned by #{conn.owner}"
+            end
+          end
+
+          msg << " (#{thread_report.join(', ')})" if thread_report.any?
+
+          raise ExclusiveConnectionTimeoutError, msg
+        end
+
+        def with_new_connections_blocked
+          synchronize do
+            @threads_blocking_new_connections += 1
+          end
+
+          yield
+        ensure
+          num_new_conns_required = 0
+
+          synchronize do
+            @threads_blocking_new_connections -= 1
+
+            if @threads_blocking_new_connections.zero?
+              @available.clear
+
+              num_new_conns_required = num_waiting_in_queue
+
+              @connections.each do |conn|
+                next if conn.in_use?
+
+                @available.add conn
+                num_new_conns_required -= 1
+              end
+            end
+          end
+
+          bulk_make_new_connections(num_new_conns_required) if num_new_conns_required > 0
+        end
+
+        # Acquire a connection by one of 1) immediately removing one
+        # from the queue of available connections, 2) creating a new
+        # connection if the pool is not at capacity, 3) waiting on the
+        # queue for a connection to become available.
+        #
+        # Raises:
+        # - ActiveRecord::ConnectionTimeoutError if a connection could not be acquired
+        #
+        #--
+        # Implementation detail: the connection returned by +acquire_connection+
+        # will already be "+connection.lease+ -ed" to the current thread.
+        def acquire_connection(checkout_timeout)
+          # NOTE: we rely on <tt>@available.poll</tt> and +try_to_checkout_new_connection+ to
+          # +conn.lease+ the returned connection (and to do this in a +synchronized+
+          # section). This is not the cleanest implementation, as ideally we would
+          # <tt>synchronize { conn.lease }</tt> in this method, but by leaving it to <tt>@available.poll</tt>
+          # and +try_to_checkout_new_connection+ we can piggyback on +synchronize+ sections
+          # of the said methods and avoid an additional +synchronize+ overhead.
+          if conn = @available.poll || try_to_checkout_new_connection
+            conn
+          else
+            reap
+            @available.poll(checkout_timeout)
+          end
+        end
+
+        #--
+        # if owner_thread param is omitted, this must be called in synchronize block
+        def remove_connection_from_thread_cache(conn, owner_thread = conn.owner)
+          @thread_cached_conns.delete_pair(connection_cache_key(owner_thread), conn)
+        end
+        alias_method :release, :remove_connection_from_thread_cache
+
+        def new_connection
+          Base.send(spec.adapter_method, spec.config).tap do |conn|
+            conn.schema_cache = schema_cache.dup if schema_cache
+          end
+        end
+
+        # If the pool is not at a <tt>@size</tt> limit, establish new connection. Connecting
+        # to the DB is done outside main synchronized section.
+        #--
+        # Implementation constraint: a newly established connection returned by this
+        # method must be in the +.leased+ state.
+        def try_to_checkout_new_connection
+          # first in synchronized section check if establishing new conns is allowed
+          # and increment @now_connecting, to prevent overstepping this pool's @size
+          # constraint
+          do_checkout = synchronize do
+            if @threads_blocking_new_connections.zero? && (@connections.size + @now_connecting) < @size
+              @now_connecting += 1
+            end
+          end
+          if do_checkout
+            begin
+              # if successfully incremented @now_connecting establish new connection
+              # outside of synchronized section
+              conn = checkout_new_connection
+            ensure
+              synchronize do
+                if conn
+                  adopt_connection(conn)
+                  # returned conn needs to be already leased
+                  conn.lease
+                end
+                @now_connecting -= 1
+              end
+            end
+          end
+        end
+
+        def adopt_connection(conn)
+          conn.pool = self
+          @connections << conn
+        end
+
+        def checkout_new_connection
+          raise ConnectionNotEstablished unless @automatic_reconnect
+          new_connection
+        end
+
+        def checkout_and_verify(c)
+          c._run_checkout_callbacks do
+            c.verify!
+          end
+          c
+        rescue
+          remove c
+          c.disconnect!
+          raise
         end
-        c
-      rescue
-        remove c
-        c.disconnect!
-        raise
-      end
     end
 
     # ConnectionHandler is a collection of ConnectionPool objects. It is used
-    # for keeping separate connection pools for Active Record models that connect
-    # to different databases.
+    # for keeping separate connection pools that connect to different databases.
     #
     # For example, suppose that you have 5 models, with the following hierarchy:
     #
@@ -476,7 +898,7 @@ module ActiveRecord
     #   end
     #
     #   class Book < ActiveRecord::Base
-    #     establish_connection "library_db"
+    #     establish_connection :library_db
     #   end
     #
     #   class ScaryBook < Book
@@ -507,36 +929,67 @@ module ActiveRecord
     # ConnectionHandler accessible via ActiveRecord::Base.connection_handler.
     # All Active Record models use this handler to determine the connection pool that they
     # should use.
+    #
+    # The ConnectionHandler class is not coupled with the Active models, as it has no knowledge
+    # about the model. The model needs to pass a specification name to the handler,
+    # in order to look up the correct connection pool.
     class ConnectionHandler
-      def initialize
-        # These caches are keyed by klass.name, NOT klass. Keying them by klass
-        # alone would lead to memory leaks in development mode as all previous
-        # instances of the class would stay in memory.
-        @owner_to_pool = ThreadSafe::Cache.new(:initial_capacity => 2) do |h,k|
-          h[k] = ThreadSafe::Cache.new(:initial_capacity => 2)
+      def self.create_owner_to_pool # :nodoc:
+        Concurrent::Map.new(initial_capacity: 2) do |h, k|
+          # Discard the parent's connection pools immediately; we have no need
+          # of them
+          discard_unowned_pools(h)
+
+          h[k] = Concurrent::Map.new(initial_capacity: 2)
+        end
+      end
+
+      def self.unowned_pool_finalizer(pid_map) # :nodoc:
+        lambda do |_|
+          discard_unowned_pools(pid_map)
         end
-        @class_to_pool = ThreadSafe::Cache.new(:initial_capacity => 2) do |h,k|
-          h[k] = ThreadSafe::Cache.new
+      end
+
+      def self.discard_unowned_pools(pid_map) # :nodoc:
+        pid_map.each do |pid, pools|
+          pools.values.compact.each(&:discard!) unless pid == Process.pid
         end
       end
 
+      def initialize
+        # These caches are keyed by spec.name (ConnectionSpecification#name).
+        @owner_to_pool = ConnectionHandler.create_owner_to_pool
+
+        # Backup finalizer: if the forked child never needed a pool, the above
+        # early discard has not occurred
+        ObjectSpace.define_finalizer self, ConnectionHandler.unowned_pool_finalizer(@owner_to_pool)
+      end
+
       def connection_pool_list
         owner_to_pool.values.compact
       end
+      alias :connection_pools :connection_pool_list
 
-      def connection_pools
-        ActiveSupport::Deprecation.warn(<<-MSG.squish)
-          In the next release, this will return the same as `#connection_pool_list`.
-          (An array of pools, rather than a hash mapping specs to pools.)
-        MSG
+      def establish_connection(config)
+        resolver = ConnectionSpecification::Resolver.new(Base.configurations)
+        spec = resolver.spec(config)
 
-        Hash[connection_pool_list.map { |pool| [pool.spec, pool] }]
-      end
+        remove_connection(spec.name)
+
+        message_bus = ActiveSupport::Notifications.instrumenter
+        payload = {
+          connection_id: object_id
+        }
+        if spec
+          payload[:spec_name] = spec.name
+          payload[:config] = spec.config
+        end
+
+        message_bus.instrument("!connection.active_record", payload) do
+          owner_to_pool[spec.name] = ConnectionAdapters::ConnectionPool.new(spec)
+        end
 
-      def establish_connection(owner, spec)
-        @class_to_pool.clear
-        raise RuntimeError, "Anonymous class is not allowed." unless owner.name
-        owner_to_pool[owner.name] = ConnectionAdapters::ConnectionPool.new(spec)
+        owner_to_pool[spec.name]
       end
 
       # Returns true if there are any active connections among the connection
@@ -553,6 +1006,8 @@ module ActiveRecord
       end
 
       # Clears the cache which maps classes.
+      #
+      # See ConnectionPool#clear_reloadable_connections! for details.
       def clear_reloadable_connections!
         connection_pool_list.each(&:clear_reloadable_connections!)
       end
@@ -561,105 +1016,72 @@ module ActiveRecord
         connection_pool_list.each(&:disconnect!)
       end
 
+      # Disconnects all currently idle connections.
+      #
+      # See ConnectionPool#flush! for details.
+      def flush_idle_connections!
+        connection_pool_list.each(&:flush!)
+      end
+
       # Locate the connection of the nearest super class. This can be an
       # active or defined connection: if it is the latter, it will be
       # opened and set as the active connection for the class it was defined
       # for (not necessarily the current class).
-      def retrieve_connection(klass) #:nodoc:
-        pool = retrieve_connection_pool(klass)
-        raise ConnectionNotEstablished, "No connection pool for #{klass}" unless pool
-        conn = pool.connection
-        raise ConnectionNotEstablished, "No connection for #{klass} in connection pool" unless conn
-        conn
+      def retrieve_connection(spec_name) #:nodoc:
+        pool = retrieve_connection_pool(spec_name)
+        raise ConnectionNotEstablished, "No connection pool with '#{spec_name}' found." unless pool
+        pool.connection
       end
 
       # Returns true if a connection that's accessible to this class has
       # already been opened.
-      def connected?(klass)
-        conn = retrieve_connection_pool(klass)
+      def connected?(spec_name)
+        conn = retrieve_connection_pool(spec_name)
         conn && conn.connected?
       end
 
       # Remove the connection for this class. This will close the active
       # connection and the defined connection (if they exist). The result
-      # can be used as an argument for establish_connection, for easily
+      # can be used as an argument for #establish_connection, for easily
       # re-establishing the connection.
-      def remove_connection(owner)
-        if pool = owner_to_pool.delete(owner.name)
-          @class_to_pool.clear
+      def remove_connection(spec_name)
+        if pool = owner_to_pool.delete(spec_name)
           pool.automatic_reconnect = false
           pool.disconnect!
           pool.spec.config
         end
       end
 
-      # Retrieving the connection pool happens a lot so we cache it in @class_to_pool.
+      # Retrieving the connection pool happens a lot, so we cache it in @owner_to_pool.
       # This makes retrieving the connection pool O(1) once the process is warm.
       # When a connection is established or removed, we invalidate the cache.
-      #
-      # Ideally we would use #fetch here, as class_to_pool[klass] may sometimes be nil.
-      # However, benchmarking (https://gist.github.com/jonleighton/3552829) showed that
-      # #fetch is significantly slower than #[]. So in the nil case, no caching will
-      # take place, but that's ok since the nil case is not the common one that we wish
-      # to optimise for.
-      def retrieve_connection_pool(klass)
-        class_to_pool[klass.name] ||= begin
-          until pool = pool_for(klass)
-            klass = klass.superclass
-            break unless klass <= Base
-          end
-
-          class_to_pool[klass.name] = pool
-        end
-      end
-
-      private
-
-      def owner_to_pool
-        @owner_to_pool[Process.pid]
-      end
-
-      def class_to_pool
-        @class_to_pool[Process.pid]
-      end
-
-      def pool_for(owner)
-        owner_to_pool.fetch(owner.name) {
-          if ancestor_pool = pool_from_any_process_for(owner)
+      def retrieve_connection_pool(spec_name)
+        owner_to_pool.fetch(spec_name) do
+          # Check if a connection was previously established in an ancestor process,
+          # which may have been forked.
+          if ancestor_pool = pool_from_any_process_for(spec_name)
             # A connection was established in an ancestor process that must have
             # subsequently forked. We can't reuse the connection, but we can copy
             # the specification and establish a new connection with it.
-            establish_connection owner, ancestor_pool.spec
+            establish_connection(ancestor_pool.spec.to_hash).tap do |pool|
+              pool.schema_cache = ancestor_pool.schema_cache if ancestor_pool.schema_cache
+            end
           else
-            owner_to_pool[owner.name] = nil
+            owner_to_pool[spec_name] = nil
           end
-        }
-      end
-
-      def pool_from_any_process_for(owner)
-        owner_to_pool = @owner_to_pool.values.reverse.find { |v| v[owner.name] }
-        owner_to_pool && owner_to_pool[owner.name]
-      end
-    end
-
-    class ConnectionManagement
-      def initialize(app)
-        @app = app
+        end
       end
 
-      def call(env)
-        testing = env['rack.test']
+      private
 
-        response = @app.call(env)
-        response[2] = ::Rack::BodyProxy.new(response[2]) do
-          ActiveRecord::Base.clear_active_connections! unless testing
+        def owner_to_pool
+          @owner_to_pool[Process.pid]
         end
 
-        response
-      rescue Exception
-        ActiveRecord::Base.clear_active_connections! unless testing
-        raise
-      end
+        def pool_from_any_process_for(spec_name)
+          owner_to_pool = @owner_to_pool.values.reverse.find { |v| v[spec_name] }
+          owner_to_pool && owner_to_pool[spec_name]
+        end
     end
   end
 end