active_admin-state_machine 0.1.1 → 1.0.0.pre1

data/spec/dummy/config/environments/production.rb

@@ -1,67 +1,120 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb
+require "active_support/core_ext/integer/time"
 
-  # Code is not reloaded between requests
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
   config.cache_classes = true
 
-  # Full error reports are disabled and caching is turned on
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
   config.consider_all_requests_local       = false
   config.action_controller.perform_caching = true
 
-  # Disable Rails's static asset server (Apache or nginx will already do this)
-  config.serve_static_assets = false
+  # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"]
+  # or in config/master.key. This key is used to decrypt credentials (and other encrypted files).
+  # config.require_master_key = true
+
+  # Disable serving static files from the `/public` folder by default since
+  # Apache or NGINX already handles this.
+  config.public_file_server.enabled = ENV['RAILS_SERVE_STATIC_FILES'].present?
 
-  # Compress JavaScripts and CSS
-  config.assets.compress = true
+  # Compress CSS using a preprocessor.
+  # config.assets.css_compressor = :sass
 
-  # Don't fallback to assets pipeline if a precompiled asset is missed
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
   config.assets.compile = false
 
-  # Generate digests for assets URLs
-  config.assets.digest = true
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.asset_host = 'http://assets.example.com'
 
-  # Defaults to nil and saved in location specified by config.assets.prefix
-  # config.assets.manifest = YOUR_PATH
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = 'X-Sendfile' # for Apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for NGINX
 
-  # Specifies the header that your server uses for sending files
-  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
-  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+  # Store uploaded files on the local file system (see config/storage.yml for options).
+  config.active_storage.service = :local
+
+  # Mount Action Cable outside main process or domain.
+  # config.action_cable.mount_path = nil
+  # config.action_cable.url = 'wss://example.com/cable'
+  # config.action_cable.allowed_request_origins = [ 'http://example.com', /http:\/\/example.*/ ]
 
   # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
   # config.force_ssl = true
 
-  # See everything in the log (default is :info)
-  # config.log_level = :debug
-
-  # Prepend all log lines with the following tags
-  # config.log_tags = [ :subdomain, :uuid ]
+  # Include generic and useful information about system operation, but avoid logging too much
+  # information to avoid inadvertent exposure of personally identifiable information (PII).
+  config.log_level = :info
 
-  # Use a different logger for distributed setups
-  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+  # Prepend all log lines with the following tags.
+  config.log_tags = [ :request_id ]
 
-  # Use a different cache store in production
+  # Use a different cache store in production.
   # config.cache_store = :mem_cache_store
 
-  # Enable serving of images, stylesheets, and JavaScripts from an asset server
-  # config.action_controller.asset_host = "http://assets.example.com"
+  # Use a real queuing backend for Active Job (and separate queues per environment).
+  # config.active_job.queue_adapter     = :resque
+  # config.active_job.queue_name_prefix = "dummy_production"
 
-  # Precompile additional assets (application.js, application.css, and all non-JS/CSS are already added)
-  # config.assets.precompile += %w( search.js )
+  config.action_mailer.perform_caching = false
 
-  # Disable delivery errors, bad email addresses will be ignored
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
   # config.action_mailer.raise_delivery_errors = false
 
-  # Enable threaded mode
-  # config.threadsafe!
-
   # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
-  # the I18n.default_locale when a translation can not be found)
+  # the I18n.default_locale when a translation cannot be found).
   config.i18n.fallbacks = true
 
-  # Send deprecation notices to registered listeners
+  # Send deprecation notices to registered listeners.
   config.active_support.deprecation = :notify
 
-  # Log the query plan for queries taking more than this (works
-  # with SQLite, MySQL, and PostgreSQL)
-  # config.active_record.auto_explain_threshold_in_seconds = 0.5
+  # Log disallowed deprecations.
+  config.active_support.disallowed_deprecation = :log
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Use a different logger for distributed setups.
+  # require "syslog/logger"
+  # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new 'app-name')
+
+  if ENV["RAILS_LOG_TO_STDOUT"].present?
+    logger           = ActiveSupport::Logger.new(STDOUT)
+    logger.formatter = config.log_formatter
+    config.logger    = ActiveSupport::TaggedLogging.new(logger)
+  end
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+
+  # Inserts middleware to perform automatic connection switching.
+  # The `database_selector` hash is used to pass options to the DatabaseSelector
+  # middleware. The `delay` is used to determine how long to wait after a write
+  # to send a subsequent read to the primary.
+  #
+  # The `database_resolver` class is used by the middleware to determine which
+  # database is appropriate to use based on the time delay.
+  #
+  # The `database_resolver_context` class is used by the middleware to set
+  # timestamps for the last write to the primary. The resolver uses the context
+  # class timestamps to determine how long to wait before reading from the
+  # replica.
+  #
+  # By default Rails will store a last write timestamp in the session. The
+  # DatabaseSelector middleware is designed as such you can define your own
+  # strategy for connection switching and pass that into the middleware through
+  # these configuration options.
+  # config.active_record.database_selector = { delay: 2.seconds }
+  # config.active_record.database_resolver = ActiveRecord::Middleware::DatabaseSelector::Resolver
+  # config.active_record.database_resolver_context = ActiveRecord::Middleware::DatabaseSelector::Resolver::Session
 end

data/spec/dummy/config/environments/test.rb

@@ -1,37 +1,59 @@
-Dummy::Application.configure do
-  # Settings specified here will take precedence over those in config/application.rb
+require "active_support/core_ext/integer/time"
+
+# The test environment is used exclusively to run your application's
+# test suite. You never need to work with it otherwise. Remember that
+# your test database is "scratch space" for the test suite and is wiped
+# and recreated between test runs. Don't rely on the data there!
+
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
 
-  # The test environment is used exclusively to run your application's
-  # test suite. You never need to work with it otherwise. Remember that
-  # your test database is "scratch space" for the test suite and is wiped
-  # and recreated between test runs. Don't rely on the data there!
   config.cache_classes = true
 
-  # Configure static asset server for tests with Cache-Control for performance
-  config.serve_static_assets = true
-  config.static_cache_control = "public, max-age=3600"
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
 
-  # Log error messages when you accidentally call methods on nil
-  config.whiny_nils = true
+  # Configure public file server for tests with Cache-Control for performance.
+  config.public_file_server.enabled = true
+  config.public_file_server.headers = {
+    'Cache-Control' => "public, max-age=#{1.hour.to_i}"
+  }
 
-  # Show full error reports and disable caching
+  # Show full error reports and disable caching.
   config.consider_all_requests_local       = true
   config.action_controller.perform_caching = false
+  config.cache_store = :null_store
 
-  # Raise exceptions instead of rendering exception templates
+  # Raise exceptions instead of rendering exception templates.
   config.action_dispatch.show_exceptions = false
 
-  # Disable request forgery protection in test environment
-  config.action_controller.allow_forgery_protection    = false
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Store uploaded files on the local file system in a temporary directory.
+  config.active_storage.service = :test
+
+  config.action_mailer.perform_caching = false
 
   # Tell Action Mailer not to deliver emails to the real world.
   # The :test delivery method accumulates sent emails in the
   # ActionMailer::Base.deliveries array.
   config.action_mailer.delivery_method = :test
 
-  # Raise exception on mass assignment protection for Active Record models
-  config.active_record.mass_assignment_sanitizer = :strict
-
-  # Print deprecation notices to the stderr
+  # Print deprecation notices to the stderr.
   config.active_support.deprecation = :stderr
+
+  # Raise exceptions for disallowed deprecations.
+  config.active_support.disallowed_deprecation = :raise
+
+  # Tell Active Support which deprecation messages to disallow.
+  config.active_support.disallowed_deprecation_warnings = []
+
+  # Raises error for missing translations.
+  # config.i18n.raise_on_missing_translations = true
+
+  # Annotate rendered view with file names.
+  # config.action_view.annotate_rendered_view_with_filenames = true
 end

data/spec/dummy/config/initializers/active_admin.rb

@@ -100,7 +100,7 @@ ActiveAdmin.setup do |config|
   # Admin comments are enabled by default.
   #
   # Default:
-  config.allow_comments = false
+  config.comments = false
   #
   # You can turn them on and off for any given namespace by using a
   # namespace config block.

data/spec/dummy/config/initializers/application_controller_renderer.rb

@@ -0,0 +1,8 @@
+# Be sure to restart your server when you modify this file.
+
+# ActiveSupport::Reloader.to_prepare do
+#   ApplicationController.renderer.defaults.merge!(
+#     http_host: 'example.org',
+#     https: false
+#   )
+# end

data/spec/dummy/config/initializers/assets.rb

@@ -0,0 +1,12 @@
+# Be sure to restart your server when you modify this file.
+
+# Version of your assets, change this if you want to expire all your assets.
+Rails.application.config.assets.version = '1.0'
+
+# Add additional assets to the asset load path.
+# Rails.application.config.assets.paths << Emoji.images_path
+
+# Precompile additional assets.
+# application.js, application.css, and all non-JS/CSS in the app/assets
+# folder are already added.
+# Rails.application.config.assets.precompile += %w( admin.js admin.css )

data/spec/dummy/config/initializers/backtrace_silencers.rb

@@ -1,7 +1,8 @@
 # Be sure to restart your server when you modify this file.
 
 # You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+# Rails.backtrace_cleaner.add_silencer { |line| /my_noisy_library/.match?(line) }
 
-# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code
+# by setting BACKTRACE=1 before calling your invocation, like "BACKTRACE=1 ./bin/rails runner 'MyClass.perform'".
+Rails.backtrace_cleaner.remove_silencers! if ENV["BACKTRACE"]

data/spec/dummy/config/initializers/content_security_policy.rb

@@ -0,0 +1,28 @@
+# Be sure to restart your server when you modify this file.
+
+# Define an application-wide content security policy
+# For further information see the following documentation
+# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy
+
+# Rails.application.config.content_security_policy do |policy|
+#   policy.default_src :self, :https
+#   policy.font_src    :self, :https, :data
+#   policy.img_src     :self, :https, :data
+#   policy.object_src  :none
+#   policy.script_src  :self, :https
+#   policy.style_src   :self, :https
+
+#   # Specify URI for violation reports
+#   # policy.report_uri "/csp-violation-report-endpoint"
+# end
+
+# If you are using UJS then enable automatic nonce generation
+# Rails.application.config.content_security_policy_nonce_generator = -> request { SecureRandom.base64(16) }
+
+# Set the nonce only to specific directives
+# Rails.application.config.content_security_policy_nonce_directives = %w(script-src)
+
+# Report CSP violations to a specified URI
+# For further information see the following documentation:
+# https://developer.mozilla.org/en-US/docs/Web/HTTP/Headers/Content-Security-Policy-Report-Only
+# Rails.application.config.content_security_policy_report_only = true

data/spec/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,5 @@
+# Be sure to restart your server when you modify this file.
+
+# Specify a serializer for the signed and encrypted cookie jars.
+# Valid options are :json, :marshal, and :hybrid.
+Rails.application.config.action_dispatch.cookies_serializer = :marshal

data/spec/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,6 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [
+  :passw, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn
+]

data/spec/dummy/config/initializers/inflections.rb

@@ -1,15 +1,16 @@
 # Be sure to restart your server when you modify this file.
 
-# Add new inflection rules using the following format
-# (all these examples are active by default):
-# ActiveSupport::Inflector.inflections do |inflect|
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
 #   inflect.plural /^(ox)$/i, '\1en'
 #   inflect.singular /^(ox)en/i, '\1'
 #   inflect.irregular 'person', 'people'
 #   inflect.uncountable %w( fish sheep )
 # end
-#
+
 # These inflection rules are supported but not enabled by default:
-# ActiveSupport::Inflector.inflections do |inflect|
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
 #   inflect.acronym 'RESTful'
 # end

data/spec/dummy/config/initializers/mime_types.rb

@@ -2,4 +2,3 @@
 
 # Add new mime types for use in respond_to blocks:
 # Mime::Type.register "text/richtext", :rtf
-# Mime::Type.register_alias "text/html", :iphone

data/spec/dummy/config/initializers/permissions_policy.rb

@@ -0,0 +1,11 @@
+# Define an application-wide HTTP permissions policy. For further
+# information see https://developers.google.com/web/updates/2018/06/feature-policy
+#
+# Rails.application.config.permissions_policy do |f|
+#   f.camera      :none
+#   f.gyroscope   :none
+#   f.microphone  :none
+#   f.usb         :none
+#   f.fullscreen  :self
+#   f.payment     :self, "https://secure.example.com"
+# end

data/spec/dummy/config/initializers/wrap_parameters.rb

@@ -1,5 +1,5 @@
 # Be sure to restart your server when you modify this file.
-#
+
 # This file contains settings for ActionController::ParamsWrapper which
 # is enabled by default.
 
@@ -8,7 +8,7 @@ ActiveSupport.on_load(:action_controller) do
   wrap_parameters format: [:json]
 end
 
-# Disable root element in JSON by default.
-ActiveSupport.on_load(:active_record) do
-  self.include_root_in_json = false
-end
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#   self.include_root_in_json = true
+# end

data/spec/dummy/config/locales/en.yml

@@ -1,5 +1,33 @@
-# Sample localization file for English. Add more files in this directory for other locales.
-# See https://github.com/svenfuchs/rails-i18n/tree/master/rails%2Flocale for starting points.
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# The following keys must be escaped otherwise they will not be retrieved by
+# the default I18n backend:
+#
+# true, false, on, off, yes, no
+#
+# Instead, surround them with single quotes.
+#
+# en:
+#   'true': 'foo'
+#
+# To learn more, please read the Rails Internationalization guide
+# available at https://guides.rubyonrails.org/i18n.html.
 
 en:
   posts:

data/spec/dummy/config/routes.rb

@@ -1,61 +1,4 @@
-Dummy::Application.routes.draw do
+Rails.application.routes.draw do
   devise_for :admin_users, ActiveAdmin::Devise.config
   ActiveAdmin.routes(self)
-
-  # The priority is based upon order of creation:
-  # first created -> highest priority.
-
-  # Sample of regular route:
-  #   match 'products/:id' => 'catalog#view'
-  # Keep in mind you can assign values other than :controller and :action
-
-  # Sample of named route:
-  #   match 'products/:id/purchase' => 'catalog#purchase', :as => :purchase
-  # This route can be invoked with purchase_url(:id => product.id)
-
-  # Sample resource route (maps HTTP verbs to controller actions automatically):
-  #   resources :products
-
-  # Sample resource route with options:
-  #   resources :products do
-  #     member do
-  #       get 'short'
-  #       post 'toggle'
-  #     end
-  #
-  #     collection do
-  #       get 'sold'
-  #     end
-  #   end
-
-  # Sample resource route with sub-resources:
-  #   resources :products do
-  #     resources :comments, :sales
-  #     resource :seller
-  #   end
-
-  # Sample resource route with more complex sub-resources
-  #   resources :products do
-  #     resources :comments
-  #     resources :sales do
-  #       get 'recent', :on => :collection
-  #     end
-  #   end
-
-  # Sample resource route within a namespace:
-  #   namespace :admin do
-  #     # Directs /admin/products/* to Admin::ProductsController
-  #     # (app/controllers/admin/products_controller.rb)
-  #     resources :products
-  #   end
-
-  # You can have the root of your site routed with "root"
-  # just remember to delete public/index.html.
-  # root :to => 'welcome#index'
-
-  # See how all your routes lay out with "rake routes"
-
-  # This is a legacy wild controller route that's not recommended for RESTful applications.
-  # Note: This route will make all actions in every controller accessible via GET requests.
-  # match ':controller(/:action(/:id))(.:format)'
 end