actionpack 8.0.3 → 8.1.1

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: b131da258151267320d978699cdc9ed60f96060bbeeb5bfa85f8da0ab648497f
-  data.tar.gz: 2300ba0391c2e63f5e0ab71060bec7ef3e149d32064e5eccfd1a1f46ecad2820
+  metadata.gz: c53f4cddcbfff66aa4ff4a9ffaafc317d3b08c72b31cff8197a4091275fa67ea
+  data.tar.gz: e76e733e0add77c1edc5f7cbcb919b6b5afa55da290de9f90e0fb42e7c55fe00
 SHA512:
-  metadata.gz: 13ee7198d843341f8b97aa564b70385fd26ee5e3bdd2560e56cc20a16591d8502daa4befec55a81bc4783e5451648acf35dd67de6ca62cf0b41f5ae37cec9557
-  data.tar.gz: 17972b2a557984ad9a96f3947135fe29dd6aae6dfd0a019204be60e0d82056ed390333bad574ae9ec8d762b24574f4aac8103e04d647fca3a75736763ecae9f6
+  metadata.gz: a7b50973de12321c35604c52232fe9452257d7f613b3c59068d3a900042f3cfd22e0aa36507f7f31e86a7031060390136a6a36b2c76e10a602c8c4309a893e41
+  data.tar.gz: 4b67fa19b19074660c1ceae3ec08470408cf19a59f851da9bf8471ca3bb5bf50add910c7e904e7190e0cfc78bdffebaec04493c55fb4c2f0e3009d46ab83c8b4

data/CHANGELOG.md

@@ -1,285 +1,477 @@
-## Rails 8.0.3 (September 22, 2025) ##
+## Rails 8.1.1 (October 28, 2025) ##
 
-*   URL helpers for engines mounted at the application root handle `SCRIPT_NAME` correctly.
-
-    Fixed an issue where `SCRIPT_NAME` is not applied to paths generated for routes in an engine
-    mounted at "/".
+*   Allow methods starting with underscore to be action methods.
 
-    *Mike Dalessio*
+    Disallowing methods starting with an underscore from being action methods
+    was an unintended side effect of the performance optimization in
+    207a254.
 
-*   Fix `Rails.application.reload_routes!` from clearing almost all routes.
-
-    When calling `Rails.application.reload_routes!` inside a middleware of
-    a Rake task, it was possible under certain conditions that all routes would be cleared.
-    If ran inside a middleware, this would result in getting a 404 on most page you visit.
-    This issue was only happening in development.
+    Fixes #55985.
 
-    *Edouard Chin*
-
-*   Address `rack 3.2` deprecations warnings.
-
-    ```
-    warning: Status code :unprocessable_entity is deprecated and will be removed in a future version of Rack.
-    Please use :unprocessable_content instead.
-    ```
+    *Rafael Mendonça França*
 
-    Rails API will transparently convert one into the other for the foreseeable future.
 
-    *Earlopain*, *Jean Boussier*
+## Rails 8.1.0 (October 22, 2025) ##
 
-*   Support hash-source in Content Security Policy.
+*   Submit test requests using `as: :html` with `Content-Type: x-www-form-urlencoded`
 
-    *madogiwa*
+    *Sean Doyle*
 
-*   Always return empty body for HEAD requests in `PublicExceptions` and
-    `DebugExceptions`.
+*   Add link-local IP ranges to `ActionDispatch::RemoteIp` default proxies.
 
-    This is required by `Rack::Lint` (per RFC9110).
+    Link-local addresses (`169.254.0.0/16` for IPv4 and `fe80::/10` for IPv6)
+    are now included in the default trusted proxy list, similar to private IP ranges.
 
-    *Hartley McGuire*
+    *Adam Daniels*
 
+*   `remote_ip` will no longer ignore IPs in X-Forwarded-For headers if they
+    are accompanied by port information.
 
-## Rails 8.0.2.1 (August 13, 2025) ##
+    *Duncan Brown*, *Prevenios Marinos*, *Masafumi Koba*, *Adam Daniels*
 
-*   No changes.
+*   Add `action_dispatch.verbose_redirect_logs` setting that logs where redirects were called from.
 
-## Rails 8.0.2 (March 12, 2025) ##
+    Similar to `active_record.verbose_query_logs` and `active_job.verbose_enqueue_logs`, this adds a line in your logs that shows where a redirect was called from.
 
-*   Improve `with_routing` test helper to not rebuild the middleware stack.
+    Example:
 
-    Otherwise some middleware configuration could be lost.
+    ```
+    Redirected to http://localhost:3000/posts/1
+    ↳ app/controllers/posts_controller.rb:32:in `block (2 levels) in create'
+    ```
 
-    *Édouard Chin*
+    *Dennis Paagman*
 
-*   Add resource name to the `ArgumentError` that's raised when invalid `:only` or `:except` options are given to `#resource` or `#resources`
+*   Add engine route filtering and better formatting in `bin/rails routes`.
 
-    This makes it easier to locate the source of the problem, especially for routes drawn by gems.
+    Allow engine routes to be filterable in the routing inspector, and
+    improve formatting of engine routing output.
 
     Before:
     ```
-    :only and :except must include only [:index, :create, :new, :show, :update, :destroy, :edit], but also included [:foo, :bar]
+    > bin/rails routes -e engine_only
+    No routes were found for this grep pattern.
+    For more information about routes, see the Rails guide: https://guides.rubyonrails.org/routing.html.
     ```
 
     After:
     ```
-    Route `resources :products` - :only and :except must include only [:index, :create, :new, :show, :update, :destroy, :edit], but also included [:foo, :bar]
+    > bin/rails routes -e engine_only
+    Routes for application:
+    No routes were found for this grep pattern.
+    For more information about routes, see the Rails guide: https://guides.rubyonrails.org/routing.html.
+
+    Routes for Test::Engine:
+    Prefix Verb URI Pattern       Controller#Action
+    engine GET  /engine_only(.:format) a#b
     ```
 
-    *Jeremy Green*
+    *Dennis Paagman*, *Gannon McGibbon*
 
-*   Fix `url_for` to handle `:path_params` gracefully when it's not a `Hash`.
+*   Add structured events for Action Pack and Action Dispatch:
+    - `action_dispatch.redirect`
+    - `action_controller.request_started`
+    - `action_controller.request_completed`
+    - `action_controller.callback_halted`
+    - `action_controller.rescue_from_handled`
+    - `action_controller.file_sent`
+    - `action_controller.redirected`
+    - `action_controller.data_sent`
+    - `action_controller.unpermitted_parameters`
+    - `action_controller.fragment_cache`
 
-    Prevents various security scanners from causing exceptions.
+    *Adrianna Chang*
 
-    *Martin Emde*
+*   URL helpers for engines mounted at the application root handle `SCRIPT_NAME` correctly.
 
-*   Fix `ActionDispatch::Executor` to unwrap exceptions like other error reporting middlewares.
+    Fixed an issue where `SCRIPT_NAME` is not applied to paths generated for routes in an engine
+    mounted at "/".
 
-    *Jean Boussier*
+    *Mike Dalessio*
 
+*   Update `ActionController::Metal::RateLimiting` to support passing method names to `:by` and `:with`
 
-## Rails 8.0.1 (December 13, 2024) ##
+    ```ruby
+    class SignupsController < ApplicationController
+      rate_limit to: 10, within: 1.minute, with: :redirect_with_flash
 
-*   Add `ActionDispatch::Request::Session#store` method to conform Rack spec.
+      private
+        def redirect_with_flash
+          redirect_to root_url, alert: "Too many requests!"
+        end
+    end
+    ```
 
-    *Yaroslav*
+    *Sean Doyle*
 
+*   Optimize `ActionDispatch::Http::URL.build_host_url` when protocol is included in host.
 
-## Rails 8.0.0.1 (December 10, 2024) ##
+    When using URL helpers with a host that includes the protocol (e.g., `{ host: "https://example.com" }`),
+    skip unnecessary protocol normalization and string duplication since the extracted protocol is already
+    in the correct format. This eliminates 2 string allocations per URL generation and provides a ~10%
+    performance improvement for this case.
 
-*   Add validation to content security policies to disallow spaces and semicolons.
-    Developers should use multiple arguments, and different directive methods instead.
+    *Joshua Young*, *Hartley McGuire*
 
-    [CVE-2024-54133]
+*   Allow `action_controller.logger` to be disabled by setting it to `nil` or `false` instead of always defaulting to `Rails.logger`.
 
-    *Gannon McGibbon*
+    *Roberto Miranda*
 
+*   Remove deprecated support to a route to multiple paths.
 
-## Rails 8.0.0 (November 07, 2024) ##
+    *Rafael Mendonça França*
 
-*   No changes.
+*   Remove deprecated support for using semicolons as a query string separator.
 
+    Before:
 
-## Rails 8.0.0.rc2 (October 30, 2024) ##
+    ```ruby
+    ActionDispatch::QueryParser.each_pair("foo=bar;baz=quux").to_a
+    # => [["foo", "bar"], ["baz", "quux"]]
+    ```
 
-*   Fix routes with `::` in the path.
+    After:
+
+    ```ruby
+    ActionDispatch::QueryParser.each_pair("foo=bar;baz=quux").to_a
+    # => [["foo", "bar;baz=quux"]]
+    ```
 
     *Rafael Mendonça França*
 
-*   Maintain Rack 2 parameter parsing behaviour.
+*   Remove deprecated support to skipping over leading brackets in parameter names in the parameter parser.
 
-    *Matthew Draper*
+    Before:
 
+    ```ruby
+    ActionDispatch::ParamBuilder.from_query_string("[foo]=bar") # => { "foo" => "bar" }
+    ActionDispatch::ParamBuilder.from_query_string("[foo][bar]=baz") # => { "foo" => { "bar" => "baz" } }
+    ```
 
-## Rails 8.0.0.rc1 (October 19, 2024) ##
+    After:
 
-*   Remove `Rails.application.config.action_controller.allow_deprecated_parameters_hash_equality`.
+    ```ruby
+    ActionDispatch::ParamBuilder.from_query_string("[foo]=bar") # => { "[foo]" => "bar" }
+    ActionDispatch::ParamBuilder.from_query_string("[foo][bar]=baz") # => { "[foo]" => { "bar" => "baz" } }
+    ```
 
     *Rafael Mendonça França*
 
-*   Improve `ActionController::TestCase` to expose a binary encoded `request.body`.
+*   Deprecate `Rails.application.config.action_dispatch.ignore_leading_brackets`.
 
-    The rack spec clearly states:
+    *Rafael Mendonça França*
 
-    > The input stream is an IO-like object which contains the raw HTTP POST data.
-    > When applicable, its external encoding must be “ASCII-8BIT” and it must be opened in binary mode.
+*   Raise `ActionController::TooManyRequests` error from `ActionController::RateLimiting`
 
-    Until now its encoding was generally UTF-8, which doesn't accurately reflect production
-    behavior.
+    Requests that exceed the rate limit raise an `ActionController::TooManyRequests` error.
+    By default, Action Dispatch rescues the error and responds with a `429 Too Many Requests` status.
 
-    *Jean Boussier*
+    *Sean Doyle*
 
-*   Update `ActionController::AllowBrowser` to support passing method names to `:block`
+*   Add .md/.markdown as Markdown extensions and add a default `markdown:` renderer:
 
     ```ruby
-    class ApplicationController < ActionController::Base
-      allow_browser versions: :modern, block: :handle_outdated_browser
+    class Page
+      def to_markdown
+        body
+      end
+    end
 
-      private
-        def handle_outdated_browser
-          render file: Rails.root.join("public/custom-error.html"), status: :not_acceptable
+    class PagesController < ActionController::Base
+      def show
+        @page = Page.find(params[:id])
+
+        respond_to do |format|
+          format.html
+          format.md { render markdown: @page }
         end
+      end
     end
     ```
 
-    *Sean Doyle*
+    *DHH*
 
-*   Raise an `ArgumentError` when invalid `:only` or `:except` options are passed into `#resource` and `#resources`.
+*   Add headers to engine routes inspection command
 
-    *Joshua Young*
+    *Petrik de Heus*
 
-## Rails 8.0.0.beta1 (September 26, 2024) ##
+*   Add "Copy as text" button to error pages
 
-*   Fix non-GET requests not updating cookies in `ActionController::TestCase`.
+    *Mikkel Malmberg*
 
-    *Jon Moss*, *Hartley McGuire*
+*   Add `scope:` option to `rate_limit` method.
 
-*   Update `ActionController::Live` to use a thread-pool to reuse threads across requests.
+    Previously, it was not possible to share a rate limit count between several controllers, since the count was by
+    default separate for each controller.
 
-    *Adam Renberg Tamm*
+    Now, the `scope:` option solves this problem.
 
-*   Introduce safer, more explicit params handling method with `params#expect` such that
-    `params.expect(table: [ :attr ])` replaces `params.require(:table).permit(:attr)`
+    ```ruby
+    class APIController < ActionController::API
+      rate_limit to: 2, within: 2.seconds, scope: "api"
+    end
+
+    class API::PostsController < APIController
+      # ...
+    end
+
+    class API::UsersController < APIController
+      # ...
+    end
+    ```
+
+    *ArthurPV*, *Kamil Hanus*
+
+*   Add support for `rack.response_finished` callbacks in ActionDispatch::Executor.
+
+    The executor middleware now supports deferring completion callbacks to later
+    in the request lifecycle by utilizing Rack's `rack.response_finished` mechanism,
+    when available. This enables applications to define `rack.response_finished` callbacks
+    that may rely on state that would be cleaned up by the executor's completion callbacks.
 
-    Ensures params are filtered with consideration for the expected
-    types of values, improving handling of params and avoiding ignorable
-    errors caused by params tampering.
+    *Adrianna Chang*, *Hartley McGuire*
+
+*   Produce a log when `rescue_from` is invoked.
+
+    *Steven Webb*, *Jean Boussier*
+
+*   Allow hosts redirects from `hosts` Rails configuration
 
     ```ruby
-    # If the url is altered to ?person=hacked
-    # Before
-    params.require(:person).permit(:name, :age, pets: [:name])
-    # raises NoMethodError, causing a 500 and potential error reporting
+    config.action_controller.allowed_redirect_hosts << "example.com"
+    ```
 
-    # After
-    params.expect(person: [ :name, :age, pets: [[:name]] ])
-    # raises ActionController::ParameterMissing, correctly returning a 400 error
+    *Kevin Robatel*
+
+*   `rate_limit.action_controller` notification has additional payload
+
+    additional values: count, to, within, by, name, cache_key
+
+    *Jonathan Rochkind*
+
+*   Add JSON support to the built-in health controller.
+
+    The health controller now responds to JSON requests with a structured response
+    containing status and timestamp information. This makes it easier for monitoring
+    tools and load balancers to consume health check data programmatically.
+
+    ```ruby
+    # /up.json
+    {
+      "status": "up",
+      "timestamp": "2025-09-19T12:00:00Z"
+    }
     ```
 
-    You may also notice the new double array `[[:name]]`. In order to
-    declare when a param is expected to be an array of parameter hashes,
-    this new double array syntax is used to explicitly declare an array.
-    `expect` requires you to declare expected arrays in this way, and will
-    ignore arrays that are passed when, for example, `pet: [:name]` is used.
+    *Francesco Loreti*, *Juan Vásquez*
 
-    In order to preserve compatibility, `permit` does not adopt the new
-    double array syntax and is therefore more permissive about unexpected
-    types. Using `expect` everywhere is recommended.
+*   Allow to open source file with a crash from the browser.
 
-    We suggest replacing `params.require(:person).permit(:name, :age)`
-    with the direct replacement `params.expect(person: [:name, :age])`
-    to prevent external users from manipulating params to trigger 500
-    errors. A 400 error will be returned instead, using public/400.html
+    *Igor Kasyanchuk*
 
-    Usage of `params.require(:id)` should likewise be replaced with
-    `params.expect(:id)` which is designed to ensure that `params[:id]`
-    is a scalar and not an array or hash, also requiring the param.
+*   Always check query string keys for valid encoding just like values are checked.
+
+    *Casper Smits*
+
+*   Always return empty body for HEAD requests in `PublicExceptions` and
+    `DebugExceptions`.
+
+    This is required by `Rack::Lint` (per RFC9110).
+
+    *Hartley McGuire*
+
+*   Add comprehensive support for HTTP Cache-Control request directives according to RFC 9111.
+
+    Provides a `request.cache_control_directives` object that gives access to request cache directives:
 
     ```ruby
-    # Before
-    User.find(params.require(:id)) # allows an array, altering behavior
+    # Boolean directives
+    request.cache_control_directives.only_if_cached?  # => true/false
+    request.cache_control_directives.no_cache?        # => true/false
+    request.cache_control_directives.no_store?        # => true/false
+    request.cache_control_directives.no_transform?    # => true/false
+
+    # Value directives
+    request.cache_control_directives.max_age          # => integer or nil
+    request.cache_control_directives.max_stale        # => integer or nil (or true for valueless max-stale)
+    request.cache_control_directives.min_fresh        # => integer or nil
+    request.cache_control_directives.stale_if_error   # => integer or nil
+
+    # Special helpers for max-stale
+    request.cache_control_directives.max_stale?         # => true if max-stale present (with or without value)
+    request.cache_control_directives.max_stale_unlimited? # => true only for valueless max-stale
+    ```
 
-    # After
-    User.find(params.expect(:id)) # expect only returns non-blank permitted scalars (excludes Hash, Array, nil, "", etc)
+    Example usage:
+
+    ```ruby
+    def show
+      if request.cache_control_directives.only_if_cached?
+        @article = Article.find_cached(params[:id])
+        return head(:gateway_timeout) if @article.nil?
+      else
+        @article = Article.find(params[:id])
+      end
+
+      render :show
+    end
     ```
 
-    *Martin Emde*
+    *egg528*
 
-*   System Testing: Disable Chrome's search engine choice by default in system tests.
+*   Add assert_in_body/assert_not_in_body as the simplest way to check if a piece of text is in the response body.
 
-    *glaszig*
+    *DHH*
 
-*   Fix `Request#raw_post` raising `NoMethodError` when `rack.input` is `nil`.
+*   Include cookie name when calculating maximum allowed size.
 
     *Hartley McGuire*
 
-*   Remove `racc` dependency by manually writing `ActionDispatch::Journey::Scanner`.
+*   Implement `must-understand` directive according to RFC 9111.
 
-    *Gannon McGibbon*
+    The `must-understand` directive indicates that a cache must understand the semantics of the response status code, or discard the response. This directive is enforced to be used only with `no-store` to ensure proper cache behavior.
 
-*   Speed up `ActionDispatch::Routing::Mapper::Scope#[]` by merging frame hashes.
+    ```ruby
+    class ArticlesController < ApplicationController
+      def show
+        @article = Article.find(params[:id])
+
+        if @article.special_format?
+          must_understand
+          render status: 203 # Non-Authoritative Information
+        else
+          fresh_when @article
+        end
+      end
+    end
+    ```
 
-    *Gannon McGibbon*
+    *heka1024*
 
-*   Allow bots to ignore `allow_browser`.
+*   The JSON renderer doesn't escape HTML entities or Unicode line separators anymore.
 
-    *Matthew Nguyen*
+    Using `render json:` will no longer escape `<`, `>`, `&`, `U+2028` and `U+2029` characters that can cause errors
+    when the resulting JSON is embedded in JavaScript, or vulnerabilities when the resulting JSON is embedded in HTML.
 
-*   Deprecate drawing routes with multiple paths to make routing faster.
-    You may use `with_options` or a loop to make drawing multiple paths easier.
+    Since the renderer is used to return a JSON document as `application/json`, it's typically not necessary to escape
+    those characters, and it improves performance.
 
-    ```ruby
-    # Before
-    get "/users", "/other_path", to: "users#index"
+    Escaping will still occur when the `:callback` option is set, since the JSON is used as JavaScript code in this
+    situation (JSONP).
 
-    # After
-    get "/users", to: "users#index"
-    get "/other_path", to: "users#index"
+    You can use the `:escape` option or set `config.action_controller.escape_json_responses` to `true` to restore the
+    escaping behavior.
+
+    ```ruby
+    class PostsController < ApplicationController
+      def index
+        render json: Post.last(30), escape: true
+      end
+    end
     ```
 
-    *Gannon McGibbon*
+    *Étienne Barrié*, *Jean Boussier*
 
-*   Make `http_cache_forever` use `immutable: true`
+*   Load lazy route sets before inserting test routes
 
-    *Nate Matykiewicz*
+    Without loading lazy route sets early, we miss `after_routes_loaded` callbacks, or risk
+    invoking them with the test routes instead of the real ones if another load is triggered by an engine.
 
-*   Add `config.action_dispatch.strict_freshness`.
+    *Gannon McGibbon*
 
-    When set to `true`, the `ETag` header takes precedence over the `Last-Modified` header when both are present,
-    as specified by RFC 7232, Section 6.
+*   Raise `AbstractController::DoubleRenderError` if `head` is called after rendering.
 
-    Defaults to `false` to maintain compatibility with previous versions of Rails, but is enabled as part of
-    Rails 8.0 defaults.
+    After this change, invoking `head` will lead to an error if response body is already set:
 
-    *heka1024*
+    ```ruby
+    class PostController < ApplicationController
+      def index
+        render locals: {}
+        head :ok
+      end
+    end
+    ```
+
+    *Iaroslav Kurbatov*
+
+*   The Cookie Serializer can now serialize an Active Support SafeBuffer when using message pack.
 
-*   Support `immutable` directive in Cache-Control
+    Such code would previously produce an error if an application was using messagepack as its cookie serializer.
 
     ```ruby
-    expires_in 1.minute, public: true, immutable: true
-    # Cache-Control: public, max-age=60, immutable
+    class PostController < ApplicationController
+      def index
+        flash.notice = t(:hello_html) # This would try to serialize a SafeBuffer, which was not possible.
+      end
+    end
     ```
 
-    *heka1024*
+    *Edouard Chin*
 
-*   Add `:wasm_unsafe_eval` mapping for `content_security_policy`
+*   Fix `Rails.application.reload_routes!` from clearing almost all routes.
 
-    ```ruby
-    # Before
-    policy.script_src "'wasm-unsafe-eval'"
+    When calling `Rails.application.reload_routes!` inside a middleware of
+    a Rake task, it was possible under certain conditions that all routes would be cleared.
+    If ran inside a middleware, this would result in getting a 404 on most page you visit.
+    This issue was only happening in development.
 
-    # After
-    policy.script_src :wasm_unsafe_eval
+    *Edouard Chin*
+
+*   Add resource name to the `ArgumentError` that's raised when invalid `:only` or `:except` options are given to `#resource` or `#resources`
+
+    This makes it easier to locate the source of the problem, especially for routes drawn by gems.
+
+    Before:
+    ```
+    :only and :except must include only [:index, :create, :new, :show, :update, :destroy, :edit], but also included [:foo, :bar]
     ```
 
-    *Joe Haig*
+    After:
+    ```
+    Route `resources :products` - :only and :except must include only [:index, :create, :new, :show, :update, :destroy, :edit], but also included [:foo, :bar]
+    ```
+
+    *Jeremy Green*
+
+*   A route pointing to a non-existing controller now returns a 500 instead of a 404.
+
+    A controller not existing isn't a routing error that should result
+    in a 404, but a programming error that should result in a 500 and
+    be reported.
+
+    Until recently, this was hard to untangle because of the support
+    for dynamic `:controller` segment in routes, but since this is
+    deprecated and will be removed in Rails 8.1, we can now easily
+    not consider missing controllers as routing errors.
+
+    *Jean Boussier*
 
-*   Add `display_capture` and `keyboard_map` in `permissions_policy`
+*   Add `check_collisions` option to `ActionDispatch::Session::CacheStore`.
 
-    *Cyril Blaecke*
+    Newly generated session ids use 128 bits of randomness, which is more than
+    enough to ensure collisions can't happen, but if you need to harden sessions
+    even more, you can enable this option to check in the session store that the id
+    is indeed free you can enable that option. This however incurs an extra write
+    on session creation.
 
-*   Add `connect` route helper.
+    *Shia*
+
+*   In ExceptionWrapper, match backtrace lines with built templates more often,
+    allowing improved highlighting of errors within do-end blocks in templates.
+    Fix for Ruby 3.4 to match new method labels in backtrace.
+
+    *Martin Emde*
+
+*   Allow setting content type with a symbol of the Mime type.
+
+    ```ruby
+    # Before
+    response.content_type = "text/html"
+
+    # After
+    response.content_type = :html
+    ```
 
-    *Samuel Williams*
+    *Petrik de Heus*
 
-Please check [7-2-stable](https://github.com/rails/rails/blob/7-2-stable/actionpack/CHANGELOG.md) for previous changes.
+Please check [8-0-stable](https://github.com/rails/rails/blob/8-0-stable/actionpack/CHANGELOG.md) for previous changes.

data/lib/abstract_controller/asset_paths.rb

@@ -7,8 +7,10 @@ module AbstractController
     extend ActiveSupport::Concern
 
     included do
-      config_accessor :asset_host, :assets_dir, :javascripts_dir,
-        :stylesheets_dir, :default_asset_host_protocol, :relative_url_root
+      singleton_class.delegate :asset_host, :asset_host=, :assets_dir, :assets_dir=, :javascripts_dir, :javascripts_dir=,
+        :stylesheets_dir, :stylesheets_dir=, :default_asset_host_protocol, :default_asset_host_protocol=, :relative_url_root, :relative_url_root=, to: :config
+      delegate :asset_host, :asset_host=, :assets_dir, :assets_dir=, :javascripts_dir, :javascripts_dir=,
+        :stylesheets_dir, :stylesheets_dir=, :default_asset_host_protocol, :default_asset_host_protocol=, :relative_url_root, :relative_url_root=, to: :config
     end
   end
 end