actionpack 7.1.5.1 → 7.2.0.beta1

data/lib/action_dispatch/routing/url_for.rb

@@ -1,90 +1,93 @@
 # frozen_string_literal: true
 
+# :markup: markdown
+
 module ActionDispatch
   module Routing
-    # = Action Dispatch Routing \UrlFor
+    # # Action Dispatch Routing UrlFor
     #
-    # In <tt>config/routes.rb</tt> you define URL-to-controller mappings, but the reverse
+    # In `config/routes.rb` you define URL-to-controller mappings, but the reverse
     # is also possible: a URL can be generated from one of your routing definitions.
     # URL generation functionality is centralized in this module.
     #
-    # See ActionDispatch::Routing for general information about routing and <tt>config/routes.rb</tt>.
+    # See ActionDispatch::Routing for general information about routing and
+    # `config/routes.rb`.
     #
-    # <b>Tip:</b> If you need to generate URLs from your models or some other place,
+    # **Tip:** If you need to generate URLs from your models or some other place,
     # then ActionDispatch::Routing::UrlFor is what you're looking for. Read on for
-    # an introduction. In general, this module should not be included on its own,
-    # as it is usually included by +url_helpers+ (as in <tt>Rails.application.routes.url_helpers</tt>).
-    #
-    # == URL generation from parameters
-    #
-    # As you may know, some functions, such as <tt>ActionController::Base#url_for</tt>
-    # and ActionView::Helpers::UrlHelper#link_to, can generate URLs given a set
-    # of parameters. For example, you've probably had the chance to write code
-    # like this in one of your views:
-    #
-    #   <%= link_to('Click here', controller: 'users',
-    #           action: 'new', message: 'Welcome!') %>
-    #   # => <a href="/users/new?message=Welcome%21">Click here</a>
-    #
-    # +link_to+, and all other functions that require URL generation functionality,
-    # actually use ActionDispatch::Routing::UrlFor under the hood. And in particular,
-    # they use the ActionDispatch::Routing::UrlFor#url_for method. One can generate
-    # the same path as the above example by using the following code:
-    #
-    #   include ActionDispatch::Routing::UrlFor
-    #   url_for(controller: 'users',
-    #           action: 'new',
-    #           message: 'Welcome!',
-    #           only_path: true)
-    #   # => "/users/new?message=Welcome%21"
-    #
-    # Notice the <tt>only_path: true</tt> part. This is because UrlFor has no
-    # information about the website hostname that your \Rails app is serving. So if you
-    # want to include the hostname as well, then you must also pass the <tt>:host</tt>
-    # argument:
-    #
-    #   include UrlFor
-    #   url_for(controller: 'users',
-    #           action: 'new',
-    #           message: 'Welcome!',
-    #           host: 'www.example.com')
-    #   # => "http://www.example.com/users/new?message=Welcome%21"
-    #
-    # By default, all controllers and views have access to a special version of +url_for+,
-    # that already knows what the current hostname is. So if you use +url_for+ in your
-    # controllers or your views, then you don't need to explicitly pass the <tt>:host</tt>
-    # argument.
+    # an introduction. In general, this module should not be included on its own, as
+    # it is usually included by `url_helpers` (as in
+    # `Rails.application.routes.url_helpers`).
+    #
+    # ## URL generation from parameters
+    #
+    # As you may know, some functions, such as `ActionController::Base#url_for` and
+    # ActionView::Helpers::UrlHelper#link_to, can generate URLs given a set of
+    # parameters. For example, you've probably had the chance to write code like
+    # this in one of your views:
+    #
+    #     <%= link_to('Click here', controller: 'users',
+    #             action: 'new', message: 'Welcome!') %>
+    #     # => <a href="/users/new?message=Welcome%21">Click here</a>
+    #
+    # `link_to`, and all other functions that require URL generation functionality,
+    # actually use ActionDispatch::Routing::UrlFor under the hood. And in
+    # particular, they use the ActionDispatch::Routing::UrlFor#url_for method. One
+    # can generate the same path as the above example by using the following code:
+    #
+    #     include ActionDispatch::Routing::UrlFor
+    #     url_for(controller: 'users',
+    #             action: 'new',
+    #             message: 'Welcome!',
+    #             only_path: true)
+    #     # => "/users/new?message=Welcome%21"
+    #
+    # Notice the `only_path: true` part. This is because UrlFor has no information
+    # about the website hostname that your Rails app is serving. So if you want to
+    # include the hostname as well, then you must also pass the `:host` argument:
+    #
+    #     include UrlFor
+    #     url_for(controller: 'users',
+    #             action: 'new',
+    #             message: 'Welcome!',
+    #             host: 'www.example.com')
+    #     # => "http://www.example.com/users/new?message=Welcome%21"
+    #
+    # By default, all controllers and views have access to a special version of
+    # `url_for`, that already knows what the current hostname is. So if you use
+    # `url_for` in your controllers or your views, then you don't need to explicitly
+    # pass the `:host` argument.
     #
     # For convenience, mailers also include ActionDispatch::Routing::UrlFor. So
-    # within mailers, you can use url_for. However, mailers cannot access
-    # incoming web requests in order to derive hostname information, so you have
-    # to provide the +:host+ option or set the default host using
-    # +default_url_options+. For more information on url_for in mailers see the
-    # ActionMailer::Base documentation.
-    #
+    # within mailers, you can use url_for. However, mailers cannot access incoming
+    # web requests in order to derive hostname information, so you have to provide
+    # the `:host` option or set the default host using `default_url_options`. For
+    # more information on url_for in mailers see the ActionMailer::Base
+    # documentation.
     #
-    # == URL generation for named routes
+    # ## URL generation for named routes
     #
     # UrlFor also allows one to access methods that have been auto-generated from
     # named routes. For example, suppose that you have a 'users' resource in your
-    # <tt>config/routes.rb</tt>:
+    # `config/routes.rb`:
     #
-    #   resources :users
+    #     resources :users
     #
-    # This generates, among other things, the method <tt>users_path</tt>. By default,
-    # this method is accessible from your controllers, views, and mailers. If you need
-    # to access this auto-generated method from other places (such as a model), then
-    # you can do that by including <tt>Rails.application.routes.url_helpers</tt> in your class:
+    # This generates, among other things, the method `users_path`. By default, this
+    # method is accessible from your controllers, views, and mailers. If you need to
+    # access this auto-generated method from other places (such as a model), then
+    # you can do that by including `Rails.application.routes.url_helpers` in your
+    # class:
     #
-    #   class User < ActiveRecord::Base
-    #     include Rails.application.routes.url_helpers
+    #     class User < ActiveRecord::Base
+    #       include Rails.application.routes.url_helpers
     #
-    #     def base_uri
-    #       user_path(self)
+    #       def base_uri
+    #         user_path(self)
+    #       end
     #     end
-    #   end
     #
-    #   User.find(1).base_uri # => "/users/1"
+    #     User.find(1).base_uri # => "/users/1"
     #
     module UrlFor
       extend ActiveSupport::Concern
@@ -110,66 +113,68 @@ module ActionDispatch
         super
       end
 
-      # Hook overridden in controller to add request information
-      # with +default_url_options+. Application logic should not
-      # go into url_options.
+      # Hook overridden in controller to add request information with
+      # `default_url_options`. Application logic should not go into url_options.
       def url_options
         default_url_options
       end
 
-      # Generate a URL based on the options provided, +default_url_options+, and the
-      # routes defined in <tt>config/routes.rb</tt>. The following options are supported:
+      # Generate a URL based on the options provided, `default_url_options`, and the
+      # routes defined in `config/routes.rb`. The following options are supported:
+      #
+      # *   `:only_path` - If true, the relative URL is returned. Defaults to `false`.
+      # *   `:protocol` - The protocol to connect to. Defaults to `"http"`.
+      # *   `:host` - Specifies the host the link should be targeted at. If
+      #     `:only_path` is false, this option must be provided either explicitly, or
+      #     via `default_url_options`.
+      # *   `:subdomain` - Specifies the subdomain of the link, using the `tld_length`
+      #     to split the subdomain from the host. If false, removes all subdomains
+      #     from the host part of the link.
+      # *   `:domain` - Specifies the domain of the link, using the `tld_length` to
+      #     split the domain from the host.
+      # *   `:tld_length` - Number of labels the TLD id composed of, only used if
+      #     `:subdomain` or `:domain` are supplied. Defaults to
+      #     `ActionDispatch::Http::URL.tld_length`, which in turn defaults to 1.
+      # *   `:port` - Optionally specify the port to connect to.
+      # *   `:anchor` - An anchor name to be appended to the path.
+      # *   `:params` - The query parameters to be appended to the path.
+      # *   `:path_params` - The query parameters that will only be used for the named
+      #     dynamic segments of path. If unused, they will be discarded.
+      # *   `:trailing_slash` - If true, adds a trailing slash, as in
+      #     `"/archive/2009/"`.
+      # *   `:script_name` - Specifies application path relative to domain root. If
+      #     provided, prepends application path.
       #
-      # * <tt>:only_path</tt> - If true, the relative URL is returned. Defaults to +false+.
-      # * <tt>:protocol</tt> - The protocol to connect to. Defaults to <tt>"http"</tt>.
-      # * <tt>:host</tt> - Specifies the host the link should be targeted at.
-      #   If <tt>:only_path</tt> is false, this option must be
-      #   provided either explicitly, or via +default_url_options+.
-      # * <tt>:subdomain</tt> - Specifies the subdomain of the link, using the +tld_length+
-      #   to split the subdomain from the host.
-      #   If false, removes all subdomains from the host part of the link.
-      # * <tt>:domain</tt> - Specifies the domain of the link, using the +tld_length+
-      #   to split the domain from the host.
-      # * <tt>:tld_length</tt> - Number of labels the TLD id composed of, only used if
-      #   <tt>:subdomain</tt> or <tt>:domain</tt> are supplied. Defaults to
-      #   <tt>ActionDispatch::Http::URL.tld_length</tt>, which in turn defaults to 1.
-      # * <tt>:port</tt> - Optionally specify the port to connect to.
-      # * <tt>:anchor</tt> - An anchor name to be appended to the path.
-      # * <tt>:params</tt> - The query parameters to be appended to the path.
-      # * <tt>:path_params</tt> - The query parameters that will only be used
-      #   for the named dynamic segments of path. If unused, they will be discarded.
-      # * <tt>:trailing_slash</tt> - If true, adds a trailing slash, as in <tt>"/archive/2009/"</tt>.
-      # * <tt>:script_name</tt> - Specifies application path relative to domain root. If provided, prepends application path.
       #
-      # Any other key (<tt>:controller</tt>, <tt>:action</tt>, etc.) given to
-      # +url_for+ is forwarded to the Routes module.
+      # Any other key (`:controller`, `:action`, etc.) given to `url_for` is forwarded
+      # to the Routes module.
       #
-      #    url_for controller: 'tasks', action: 'testing', host: 'somehost.org', port: '8080'
-      #    # => 'http://somehost.org:8080/tasks/testing'
-      #    url_for controller: 'tasks', action: 'testing', host: 'somehost.org', anchor: 'ok', only_path: true
-      #    # => '/tasks/testing#ok'
-      #    url_for controller: 'tasks', action: 'testing', trailing_slash: true
-      #    # => 'http://somehost.org/tasks/testing/'
-      #    url_for controller: 'tasks', action: 'testing', host: 'somehost.org', number: '33'
-      #    # => 'http://somehost.org/tasks/testing?number=33'
-      #    url_for controller: 'tasks', action: 'testing', host: 'somehost.org', script_name: "/myapp"
-      #    # => 'http://somehost.org/myapp/tasks/testing'
-      #    url_for controller: 'tasks', action: 'testing', host: 'somehost.org', script_name: "/myapp", only_path: true
-      #    # => '/myapp/tasks/testing'
+      #     url_for controller: 'tasks', action: 'testing', host: 'somehost.org', port: '8080'
+      #     # => 'http://somehost.org:8080/tasks/testing'
+      #     url_for controller: 'tasks', action: 'testing', host: 'somehost.org', anchor: 'ok', only_path: true
+      #     # => '/tasks/testing#ok'
+      #     url_for controller: 'tasks', action: 'testing', trailing_slash: true
+      #     # => 'http://somehost.org/tasks/testing/'
+      #     url_for controller: 'tasks', action: 'testing', host: 'somehost.org', number: '33'
+      #     # => 'http://somehost.org/tasks/testing?number=33'
+      #     url_for controller: 'tasks', action: 'testing', host: 'somehost.org', script_name: "/myapp"
+      #     # => 'http://somehost.org/myapp/tasks/testing'
+      #     url_for controller: 'tasks', action: 'testing', host: 'somehost.org', script_name: "/myapp", only_path: true
+      #     # => '/myapp/tasks/testing'
       #
       # Missing routes keys may be filled in from the current request's parameters
-      # (e.g. +:controller+, +:action+, +:id+, and any other parameters that are
-      # placed in the path). Given that the current action has been reached
-      # through <tt>GET /users/1</tt>:
+      # (e.g. `:controller`, `:action`, `:id`, and any other parameters that are
+      # placed in the path). Given that the current action has been reached through
+      # `GET /users/1`:
       #
-      #   url_for(only_path: true)                        # => '/users/1'
-      #   url_for(only_path: true, action: 'edit')        # => '/users/1/edit'
-      #   url_for(only_path: true, action: 'edit', id: 2) # => '/users/2/edit'
+      #     url_for(only_path: true)                        # => '/users/1'
+      #     url_for(only_path: true, action: 'edit')        # => '/users/1/edit'
+      #     url_for(only_path: true, action: 'edit', id: 2) # => '/users/2/edit'
       #
-      # Notice that no +:id+ parameter was provided to the first +url_for+ call
-      # and the helper used the one from the route's path. Any path parameter
-      # implicitly used by +url_for+ can always be overwritten like shown on the
-      # last +url_for+ calls.
+      # Notice that no `:id` parameter was provided to the first `url_for` call and
+      # the helper used the one from the route's path. Any path parameter implicitly
+      # used by `url_for` can always be overwritten like shown on the last `url_for`
+      # calls.
       def url_for(options = nil)
         full_url_for(options)
       end
@@ -198,21 +203,21 @@ module ActionDispatch
 
       # Allows calling direct or regular named route.
       #
-      #   resources :buckets
+      #     resources :buckets
       #
-      #   direct :recordable do |recording|
-      #     route_for(:bucket, recording.bucket)
-      #   end
+      #     direct :recordable do |recording|
+      #       route_for(:bucket, recording.bucket)
+      #     end
       #
-      #   direct :threadable do |threadable|
-      #     route_for(:recordable, threadable.parent)
-      #   end
+      #     direct :threadable do |threadable|
+      #       route_for(:recordable, threadable.parent)
+      #     end
       #
-      # This maintains the context of the original caller on
-      # whether to return a path or full URL, e.g:
+      # This maintains the context of the original caller on whether to return a path
+      # or full URL, e.g:
       #
-      #   threadable_path(threadable)  # => "/buckets/1"
-      #   threadable_url(threadable)   # => "http://example.com/buckets/1"
+      #     threadable_path(threadable)  # => "/buckets/1"
+      #     threadable_url(threadable)   # => "http://example.com/buckets/1"
       #
       def route_for(name, *args)
         public_send(:"#{name}_url", *args)