actionpack 1.4.0 → 1.5.0

data/lib/action_controller/support/binding_of_caller.rb

@@ -1,83 +0,0 @@
-begin
-  require 'simplecc'
-rescue LoadError
-  class Continuation; end # :nodoc: # for RDoc
-  def Continuation.create(*args, &block) # :nodoc:
-    cc = nil; result = callcc {|c| cc = c; block.call(cc) if block and args.empty?}
-    result ||= args
-    return *[cc, *result]
-  end
-end
-
-class Binding; end # for RDoc
-# This method returns the binding of the method that called your
-# method. It will raise an Exception when you're not inside a method.
-#
-# It's used like this:
-#   def inc_counter(amount = 1)
-#     Binding.of_caller do |binding|
-#       # Create a lambda that will increase the variable 'counter'
-#       # in the caller of this method when called.
-#       inc = eval("lambda { |arg| counter += arg }", binding)
-#       # We can refer to amount from inside this block safely.
-#       inc.call(amount)
-#     end
-#     # No other statements can go here. Put them inside the block.
-#   end
-#   counter = 0
-#   2.times { inc_counter }
-#   counter # => 2
-#
-# Binding.of_caller must be the last statement in the method.
-# This means that you will have to put everything you want to
-# do after the call to Binding.of_caller into the block of it.
-# This should be no problem however, because Ruby has closures.
-# If you don't do this an Exception will be raised. Because of
-# the way that Binding.of_caller is implemented it has to be
-# done this way.
-def Binding.of_caller(&block)
-  old_critical = Thread.critical
-  Thread.critical = true
-  count = 0
-  cc, result, error, extra_data = Continuation.create(nil, nil)
-  error.call if error
-
-  tracer = lambda do |*args|
-    type, context, extra_data = args[0], args[4], args
-    if type == "return"
-      count += 1
-      # First this method and then calling one will return --
-      # the trace event of the second event gets the context
-      # of the method which called the method that called this
-      # method.
-      if count == 2
-        # It would be nice if we could restore the trace_func
-        # that was set before we swapped in our own one, but
-        # this is impossible without overloading set_trace_func
-        # in current Ruby.
-        set_trace_func(nil)
-        cc.call(eval("binding", context), nil, extra_data)
-      end
-    elsif type == "line" then
-      nil
-    elsif type == "c-return" and extra_data[3] == :set_trace_func then
-      nil
-    else
-      set_trace_func(nil)
-      error_msg = "Binding.of_caller used in non-method context or " +
-        "trailing statements of method using it aren't in the block."
-      cc.call(nil, lambda { raise(ArgumentError, error_msg) }, nil)
-    end
-  end
-
-  unless result
-    set_trace_func(tracer)
-    return nil
-  else
-    Thread.critical = old_critical
-    case block.arity
-      when 1 then yield(result)
-      else yield(result, extra_data)        
-    end
-  end
-end

data/lib/action_controller/support/breakpoint.rb

@@ -1,518 +0,0 @@
-# The Breakpoint library provides the convenience of
-# being able to inspect and modify state, diagnose
-# bugs all via IRB by simply setting breakpoints in
-# your applications by the call of a method.
-#
-# This library was written and is supported by me,
-# Florian Gross. I can be reached at flgr@ccan.de
-# and enjoy getting feedback about my libraries.
-#
-# The whole library (including breakpoint_client.rb
-# and binding_of_caller.rb) is licensed under the
-# same license that Ruby uses. (Which is currently
-# either the GNU General Public License or a custom
-# one that allows for commercial usage.) If you for
-# some good reason need to use this under another
-# license please contact me.
-
-require 'irb'
-require File.dirname(__FILE__) + '/binding_of_caller'
-require 'drb'
-require 'drb/acl'
-
-module Breakpoint
-  id = %q$Id: breakpoint.rb 41 2005-01-22 20:22:10Z flgr $
-  Version = id.split(" ")[2].to_i
-
-  extend self
-
-  # This will pop up an interactive ruby session at a
-  # pre-defined break point in a Ruby application. In
-  # this session you can examine the environment of
-  # the break point.
-  #
-  # You can get a list of variables in the context using
-  # local_variables via +local_variables+. You can then
-  # examine their values by typing their names.
-  #
-  # You can have a look at the call stack via +caller+.
-  #
-  # The source code around the location where the breakpoint
-  # was executed can be examined via +source_lines+. Its
-  # argument specifies how much lines of context to display.
-  # The default amount of context is 5 lines. Note that
-  # the call to +source_lines+ can raise an exception when
-  # it isn't able to read in the source code.
-  #
-  # breakpoints can also return a value. They will execute
-  # a supplied block for getting a default return value.
-  # A custom value can be returned from the session by doing
-  # +throw(:debug_return, value)+.
-  #
-  # You can also give names to break points which will be
-  # used in the message that is displayed upon execution 
-  # of them.
-  #
-  # Here's a sample of how breakpoints should be placed:
-  #
-  #   class Person
-  #     def initialize(name, age)
-  #       @name, @age = name, age
-  #       breakpoint("Person#initialize")
-  #     end
-  #
-  #     attr_reader :age
-  #     def name
-  #       breakpoint("Person#name") { @name }
-  #     end
-  #   end
-  #
-  #   person = Person.new("Random Person", 23)
-  #   puts "Name: #{person.name}"
-  #
-  # And here is a sample debug session:
-  #
-  #   Executing break point "Person#initialize" at file.rb:4 in `initialize'
-  #   irb(#<Person:0x292fbe8>):001:0> local_variables
-  #   => ["name", "age", "_", "__"]
-  #   irb(#<Person:0x292fbe8>):002:0> [name, age]
-  #   => ["Random Person", 23]
-  #   irb(#<Person:0x292fbe8>):003:0> [@name, @age]
-  #   => ["Random Person", 23]
-  #   irb(#<Person:0x292fbe8>):004:0> self
-  #   => #<Person:0x292fbe8 @age=23, @name="Random Person">
-  #   irb(#<Person:0x292fbe8>):005:0> @age += 1; self
-  #   => #<Person:0x292fbe8 @age=24, @name="Random Person">
-  #   irb(#<Person:0x292fbe8>):006:0> exit
-  #   Executing break point "Person#name" at file.rb:9 in `name'
-  #   irb(#<Person:0x292fbe8>):001:0> throw(:debug_return, "Overriden name")
-  #   Name: Overriden name
-  #
-  # Breakpoint sessions will automatically have a few
-  # convenience methods available. See Breakpoint::CommandBundle
-  # for a list of them.
-  #
-  # Breakpoints can also be used remotely over sockets.
-  # This is implemented by running part of the IRB session
-  # in the application and part of it in a special client.
-  # You have to call Breakpoint.activate_drb to enable
-  # support for remote breakpoints and then run
-  # breakpoint_client.rb which is distributed with this
-  # library. See the documentation of Breakpoint.activate_drb
-  # for details.
-  def breakpoint(id = nil, context = nil, &block)
-    callstack = caller
-    callstack.slice!(0, 3) if callstack.first["breakpoint"]
-    file, line, method = *callstack.first.match(/^(.+?):(\d+)(?::in `(.*?)')?/).captures
-
-    message = "Executing break point " + (id ? "#{id.inspect} " : "") +
-              "at #{file}:#{line}" + (method ? " in `#{method}'" : "")
-
-    if context then
-      return handle_breakpoint(context, message, file, line, &block)
-    end
-
-    Binding.of_caller do |binding_context|
-      handle_breakpoint(binding_context, message, file, line, &block)
-    end
-  end
-
-  module CommandBundle
-    # Proxy to a Breakpoint client. Lets you directly execute code
-    # in the context of the client.
-    class Client
-      def initialize(eval_handler) # :nodoc:
-        @eval_handler = eval_handler
-      end
-
-      instance_methods.each do |method|
-        next if method[/^__.+__$/]
-        undef_method method
-      end
-
-      # Executes the specified code at the client.
-      def eval(code)
-        @eval_handler.call(code)
-      end
-
-      # Will execute the specified statement at the client.
-      def method_missing(method, *args, &block)
-        if args.empty? and not block
-          result = eval "#{method}"
-        else
-          # This is a bit ugly. The alternative would be using an
-          # eval context instead of an eval handler for executing
-          # the code at the client. The problem with that approach
-          # is that we would have to handle special expressions
-          # like "self", "nil" or constants ourself which is hard.
-          remote = eval %{
-            result = lambda { |block, *args| #{method}(*args, &block) }
-            def result.call_with_block(*args, &block)
-              call(block, *args)
-            end
-            result
-          }
-          remote.call_with_block(*args, &block)
-        end
-
-        return result
-      end
-    end
-
-    # Returns the source code surrounding the location where the
-    # breakpoint was issued.
-    def source_lines(context = 5, return_line_numbers = false)
-      lines = File.readlines(@__bp_file).map { |line| line.chomp }
-
-      break_line = @__bp_line
-      start_line = [break_line - context, 1].max
-      end_line = break_line + context
-
-      result = lines[(start_line - 1) .. (end_line - 1)]
-
-      if return_line_numbers then
-        return [start_line, break_line, result]
-      else
-        return result
-      end
-    end
-
-    # Lets an object that will forward method calls to the breakpoint
-    # client. This is useful for outputting longer things at the client
-    # and so on. You can for example do these things:
-    #
-    #   client.puts "Hello" # outputs "Hello" at client console
-    #   # outputs "Hello" into the file temp.txt at the client
-    #   client.File.open("temp.txt", "w") { |f| f.puts "Hello" } 
-    def client()
-      if Breakpoint.use_drb? then
-        sleep(0.5) until Breakpoint.drb_service.eval_handler
-        Client.new(Breakpoint.drb_service.eval_handler)
-      else
-        Client.new(lambda { |code| eval(code, TOPLEVEL_BINDING) })
-      end
-    end
-  end
-
-  def handle_breakpoint(context, message, file = "", line = "", &block) # :nodoc:
-    catch(:debug_return) do |value|
-      eval(%{
-        @__bp_file = #{file.inspect}
-        @__bp_line = #{line}
-        extend Breakpoint::CommandBundle
-        extend DRbUndumped if self
-      }, context) rescue nil
-
-      if not use_drb? then
-        puts message
-        IRB.start(nil, IRB::WorkSpace.new(context))
-      else
-        @drb_service.add_breakpoint(context, message)
-      end
-
-      block.call if block
-    end
-  end
-
-  # These exceptions will be raised on failed asserts
-  # if Breakpoint.asserts_cause_exceptions is set to
-  # true.
-  class FailedAssertError < RuntimeError
-  end
-
-  # This asserts that the block evaluates to true.
-  # If it doesn't evaluate to true a breakpoint will
-  # automatically be created at that execution point.
-  #
-  # You can disable assert checking in production
-  # code by setting Breakpoint.optimize_asserts to
-  # true. (It will still be enabled when Ruby is run
-  # via the -d argument.)
-  #
-  # Example:
-  #   person_name = "Foobar"
-  #   assert { not person_name.nil? }
-  #
-  # Note: If you want to use this method from an
-  # unit test, you will have to call it by its full
-  # name, Breakpoint.assert.
-  def assert(context = nil, &condition)
-    return if Breakpoint.optimize_asserts and not $DEBUG
-    return if yield
-
-    callstack = caller
-    callstack.slice!(0, 3) if callstack.first["assert"]
-    file, line, method = *callstack.first.match(/^(.+?):(\d+)(?::in `(.*?)')?/).captures
-
-    message = "Assert failed at #{file}:#{line}#{" in `#{method}'" if method}."
-
-    if Breakpoint.asserts_cause_exceptions and not $DEBUG then
-      raise(Breakpoint::FailedAssertError, message)
-    end
-
-    message += " Executing implicit breakpoint."
-
-    if context then
-      return handle_breakpoint(context, message, file, line)
-    end
-
-    Binding.of_caller do |context|
-      handle_breakpoint(context, message, file, line)
-    end
-  end
-
-  # Whether asserts should be ignored if not in debug mode.
-  # Debug mode can be enabled by running ruby with the -d
-  # switch or by setting $DEBUG to true.
-  attr_accessor :optimize_asserts
-  self.optimize_asserts = false
-
-  # Whether an Exception should be raised on failed asserts
-  # in non-$DEBUG code or not. By default this is disabled.
-  attr_accessor :asserts_cause_exceptions
-  self.asserts_cause_exceptions = false
-  @use_drb = false
-
-  attr_reader :drb_service # :nodoc:
-
-  class DRbService # :nodoc:
-    include DRbUndumped
-
-    def initialize
-      @handler = @eval_handler = @collision_handler = nil
-
-      IRB.instance_eval { @CONF[:RC] = true }
-      IRB.run_config
-    end
-
-    def collision
-      sleep(0.5) until @collision_handler
-
-      @collision_handler.call
-    end
-
-    def ping() end
-
-    def add_breakpoint(context, message)
-      workspace = IRB::WorkSpace.new(context)
-      workspace.extend(DRbUndumped)
-
-      sleep(0.5) until @handler
-
-      @handler.call(workspace, message)
-    end
-
-    attr_accessor :handler, :eval_handler, :collision_handler
-  end
-
-  # Will run Breakpoint in DRb mode. This will spawn a server
-  # that can be attached to via the breakpoint-client command
-  # whenever a breakpoint is executed. This is useful when you
-  # are debugging CGI applications or other applications where
-  # you can't access debug sessions via the standard input and
-  # output of your application.
-  #
-  # You can specify an URI where the DRb server will run at.
-  # This way you can specify the port the server runs on. The
-  # default URI is druby://localhost:42531.
-  #
-  # Please note that breakpoints will be skipped silently in
-  # case the DRb server can not spawned. (This can happen if
-  # the port is already used by another instance of your
-  # application on CGI or another application.)
-  #
-  # Also note that by default this will only allow access
-  # from localhost. You can however specify a list of
-  # allowed hosts or nil (to allow access from everywhere).
-  # But that will still not protect you from somebody
-  # reading the data as it goes through the net.
-  #
-  # A good approach for getting security and remote access
-  # is setting up an SSH tunnel between the DRb service
-  # and the client. This is usually done like this:
-  #
-  # $ ssh -L20000:127.0.0.1:20000 -R10000:127.0.0.1:10000 example.com
-  # (This will connect port 20000 at the client side to port
-  # 20000 at the server side, and port 10000 at the server
-  # side to port 10000 at the client side.)
-  #
-  # After that do this on the server side: (the code being debugged)
-  # Breakpoint.activate_drb("druby://127.0.0.1:20000", "localhost")
-  #
-  # And at the client side:
-  # ruby breakpoint_client.rb -c druby://127.0.0.1:10000 -s druby://127.0.0.1:20000
-  #
-  # Running through such a SSH proxy will also let you use 
-  # breakpoint.rb in case you are behind a firewall.
-  #
-  # Detailed information about running DRb through firewalls is
-  # available at http://www.rubygarden.org/ruby?DrbTutorial
-  def activate_drb(uri = nil, allowed_hosts = ['localhost', '127.0.0.1', '::1'],
-    ignore_collisions = false)
-
-    return false if @use_drb
-
-    uri ||= 'druby://localhost:42531'
-
-    if allowed_hosts then
-      acl = ["deny", "all"]
-
-      Array(allowed_hosts).each do |host|
-        acl += ["allow", host]
-      end
-
-      DRb.install_acl(ACL.new(acl))
-    end
-
-    @use_drb = true
-    @drb_service = DRbService.new
-    did_collision = false
-    begin
-      @service = DRb.start_service(uri, @drb_service)
-    rescue Errno::EADDRINUSE
-      if ignore_collisions then
-        nil
-      else
-        # The port is already occupied by another
-        # Breakpoint service. We will try to tell
-        # the old service that we want its port.
-        # It will then forward that request to the
-        # user and retry.
-        unless did_collision then
-          DRbObject.new(nil, uri).collision
-          did_collision = true
-        end
-        sleep(10)
-        retry
-      end
-    end
-
-    return true
-  end
-
-  # Deactivates a running Breakpoint service.
-  def deactivate_drb
-    @service.stop_service unless @service.nil?
-    @service = nil
-    @use_drb = false
-    @drb_service = nil
-  end
-
-  # Returns true when Breakpoints are used over DRb.
-  # Breakpoint.activate_drb causes this to be true.
-  def use_drb?
-    @use_drb == true
-  end
-end
-
-module IRB # :nodoc:
-  class << self; remove_method :start; end
-  def self.start(ap_path = nil, main_context = nil, workspace = nil)
-    $0 = File::basename(ap_path, ".rb") if ap_path
-
-    # suppress some warnings about redefined constants
-    old_verbose, $VERBOSE = $VERBOSE, nil
-    IRB.setup(ap_path)
-    $VERBOSE = old_verbose
-
-    if @CONF[:SCRIPT] then
-      irb = Irb.new(main_context, @CONF[:SCRIPT])
-    else
-      irb = Irb.new(main_context)
-    end
-
-    if workspace then
-      irb.context.workspace = workspace
-    end
-
-    @CONF[:IRB_RC].call(irb.context) if @CONF[:IRB_RC]
-    @CONF[:MAIN_CONTEXT] = irb.context
-
-    old_sigint = trap("SIGINT") do
-      begin
-        irb.signal_handle
-      rescue RubyLex::TerminateLineInput
-        # ignored
-      end
-    end
-    
-    catch(:IRB_EXIT) do
-      irb.eval_input
-    end
-  ensure
-    trap("SIGINT", old_sigint)
-  end
-
-  class << self
-    alias :old_CurrentContext :CurrentContext
-    remove_method :CurrentContext
-  end
-  def IRB.CurrentContext
-    if old_CurrentContext.nil? and Breakpoint.use_drb? then
-      result = Object.new
-      def result.last_value; end
-      return result
-    else
-      old_CurrentContext
-    end
-  end
-
-  class Context
-    alias :old_evaluate :evaluate
-    def evaluate(line, line_no)
-      if line.chomp == "exit" then
-        exit
-      else
-        old_evaluate(line, line_no)
-      end
-    end
-  end
-
-  class WorkSpace
-    alias :old_evaluate :evaluate
-
-    def evaluate(*args)
-      if Breakpoint.use_drb? then
-        result = old_evaluate(*args)
-        if args[0] != :no_proxy and
-          not [true, false, nil].include?(result)
-        then
-          result.extend(DRbUndumped) rescue nil
-        end
-        return result
-      else
-        old_evaluate(*args)
-      end
-    end
-  end
-
-  module InputCompletor
-    def self.eval(code, context, *more)
-      # Big hack, this assumes that InputCompletor
-      # will only call eval() when it wants code
-      # to be executed in the IRB context.
-      IRB.conf[:MAIN_CONTEXT].workspace.evaluate(:no_proxy, code, *more)
-    end
-  end
-end
-
-module DRb # :nodoc:
-  class DRbObject
-    undef :inspect if method_defined?(:inspect)
-    undef :clone if method_defined?(:clone)
-  end
-end
-
-# See Breakpoint.breakpoint
-def breakpoint(id = nil, &block)
-  Binding.of_caller do |context|
-    Breakpoint.breakpoint(id, context, &block)
-  end
-end
-
-# See Breakpoint.assert
-def assert(&block)
-  Binding.of_caller do |context|
-    Breakpoint.assert(context, &block)
-  end
-end