actionmailer 7.0.8.1 → 7.2.2.1

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: 24fd09fdac7de11d4db144a9b874c2ddd7d04ada6454155844eee6f55fc372bd
-  data.tar.gz: de3399f252e321b1599da621095c30d86c3a10a2d14694b65406a545eb04fb2c
+  metadata.gz: c11aff9a531baec43ef53e43297b9fad9b5b1320e15089a50882dea492089b3e
+  data.tar.gz: 36035769d7005800933e17050cc20451041da2704871f44fc3d1087eae452f44
 SHA512:
-  metadata.gz: 557c41b3383353f7fb05230df95184fda0a87913ffe8276c36cf90006957726ec251fd51a0898e97ab6994b857080fadbf7feca9708eb3aca84350099d9e47c8
-  data.tar.gz: 2bf6d7004b08f778380441e36eb7cfa6c378514edd7c5b04cc4e6afa71fc78853cf64d52e625a0f9ccc46a35dcd53ee910d7ed6dc5696344703f43b0b81399d0
+  metadata.gz: 2b929b02d7ca792849fc3a6af4efe1331b3fd5db624ba5931adca0271d6b5faa201dd395b221b60fc7c8869b251b8ff8cb1f19131531bb88356684684c962c5a
+  data.tar.gz: a62791462cce39d377c74b5ce8df83dbb789d17cffc05036c3d149f04c3bc5212261ac144ec0d6148502f969094ecb896daf9e4af392a01d90fc6a2312dbc7a0

data/CHANGELOG.md

@@ -1,141 +1,42 @@
-## Rails 7.0.8.1 (February 21, 2024) ##
+## Rails 7.2.2.1 (December 10, 2024) ##
 
 *   No changes.
 
 
-## Rails 7.0.8 (September 09, 2023) ##
+## Rails 7.2.2 (October 30, 2024) ##
 
 *   No changes.
 
 
-## Rails 7.0.7.2 (August 22, 2023) ##
+## Rails 7.2.1.2 (October 23, 2024) ##
 
-*   No changes.
-
-
-## Rails 7.0.7.1 (August 22, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.7 (August 09, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.6 (June 29, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.5.1 (June 26, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.5 (May 24, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.4.3 (March 13, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.4.2 (January 24, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.4.1 (January 17, 2023) ##
-
-*   No changes.
-
-
-## Rails 7.0.4 (September 09, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.3.1 (July 12, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.3 (May 09, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.2.4 (April 26, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.2.3 (March 08, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.2.2 (February 11, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.2.1 (February 11, 2022) ##
-
-*   No changes.
-
-
-## Rails 7.0.2 (February 08, 2022) ##
-
-*   No changes.
+*   Fix NoMethodError in `block_format` helper
 
+    *Michael Leimstaedtner*
 
-## Rails 7.0.1 (January 06, 2022) ##
 
-*   Keep configuration of `smtp_settings` consistent between 6.1 and 7.0.
+## Rails 7.2.1.1 (October 15, 2024) ##
 
-    *André Luis Leal Cardoso Junior*
+*   Avoid regex backtracking in `block_format` helper
 
+    [CVE-2024-47889]
 
-## Rails 7.0.0 (December 15, 2021) ##
-
-*   No changes.
+    *John Hawthorn*
 
 
-## Rails 7.0.0.rc3 (December 14, 2021) ##
+## Rails 7.2.1 (August 22, 2024) ##
 
 *   No changes.
 
 
-## Rails 7.0.0.rc2 (December 14, 2021) ##
-
-*   No changes.
-
-## Rails 7.0.0.rc1 (December 06, 2021) ##
+## Rails 7.2.0 (August 09, 2024) ##
 
-*   Remove deprecated `ActionMailer::DeliveryJob` and `ActionMailer::Parameterized::DeliveryJob`
-    in favor of `ActionMailer::MailDeliveryJob`.
+*   Remove deprecated params via `:args` for `assert_enqueued_email_with`.
 
     *Rafael Mendonça França*
 
-*   `email_address_with_name` returns just the address if name is blank.
-
-    *Thomas Hutterer*
-
-
-## Rails 7.0.0.alpha2 (September 15, 2021) ##
-
-*   No changes.
-
-
-## Rails 7.0.0.alpha1 (September 15, 2021) ##
-
-*   Configures a default of 5 for both `open_timeout` and `read_timeout` for SMTP Settings.
-
-    *André Luis Leal Cardoso Junior*
+*   Remove deprecated `config.action_mailer.preview_path`.
 
+    *Rafael Mendonça França*
 
-Please check [6-1-stable](https://github.com/rails/rails/blob/6-1-stable/actionmailer/CHANGELOG.md) for previous changes.
+Please check [7-1-stable](https://github.com/rails/rails/blob/7-1-stable/actionmailer/CHANGELOG.md) for previous changes.

data/MIT-LICENSE

@@ -1,4 +1,4 @@
-Copyright (c) 2004-2022 David Heinemeier Hansson
+Copyright (c) David Heinemeier Hansson
 
 Permission is hereby granted, free of charge, to any person obtaining
 a copy of this software and associated documentation files (the

data/README.rdoc

@@ -13,7 +13,7 @@ Additionally, an Action Mailer class can be used to process incoming email,
 such as allowing a blog to accept new posts from an email (which could even
 have been sent from a phone).
 
-You can read more about Action Mailer in the {Action Mailer Basics}[https://edgeguides.rubyonrails.org/action_mailer_basics.html] guide.
+You can read more about Action Mailer in the {Action Mailer Basics}[https://guides.rubyonrails.org/action_mailer_basics.html] guide.
 
 == Sending emails
 
@@ -78,7 +78,7 @@ Or you can just chain the methods together like:
 
 It is possible to set default values that will be used in every method in your
 Action Mailer class. To implement this functionality, you just call the public
-class method +default+ which you get for free from <tt>ActionMailer::Base</tt>.
+class method +default+ which you get for free from ActionMailer::Base.
 This method accepts a Hash as the parameter. You can use any of the headers,
 email messages have, like +:from+ as the key. You can also pass in a string as
 the key, like "Content-Type", but Action Mailer does this out of the box for you,

data/lib/action_mailer/base.rb

@@ -10,16 +10,18 @@ require "action_mailer/log_subscriber"
 require "action_mailer/rescuable"
 
 module ActionMailer
+  # = Action Mailer \Base
+  #
   # Action Mailer allows you to send email from your application using a mailer model and views.
   #
-  # = Mailer Models
+  # == Mailer Models
   #
   # To use Action Mailer, you need to create a mailer model.
   #
   #   $ bin/rails generate mailer Notifier
   #
   # The generated model inherits from <tt>ApplicationMailer</tt> which in turn
-  # inherits from <tt>ActionMailer::Base</tt>. A mailer model defines methods
+  # inherits from +ActionMailer::Base+. A mailer model defines methods
   # used to generate an email message. In these methods, you can set up variables to be used in
   # the mailer views, options on the mail itself such as the <tt>:from</tt> address, and attachments.
   #
@@ -56,7 +58,7 @@ module ActionMailer
   #
   # * <tt>mail</tt> - Allows you to specify email to be sent.
   #
-  # The hash passed to the mail method allows you to specify any header that a <tt>Mail::Message</tt>
+  # The hash passed to the mail method allows you to specify any header that a +Mail::Message+
   # will accept (any valid email header including optional fields).
   #
   # The +mail+ method, if not passed a block, will inspect your views and send all the views with
@@ -84,7 +86,7 @@ module ActionMailer
   #     format.html { render "some_other_template" }
   #   end
   #
-  # = Mailer views
+  # == Mailer views
   #
   # Like Action Controller, each mailer class has a corresponding view directory in which each
   # method of the class looks for a template with its name.
@@ -112,7 +114,7 @@ module ActionMailer
   #   <%= truncate(@note.body, length: 25) %>
   #
   #
-  # = Generating URLs
+  # == Generating URLs
   #
   # URLs can be generated in mailer views using <tt>url_for</tt> or named routes. Unlike controllers from
   # Action Pack, the mailer instance doesn't have any context about the incoming request, so you'll need
@@ -140,7 +142,7 @@ module ActionMailer
   #
   # By default when <tt>config.force_ssl</tt> is +true+, URLs generated for hosts will use the HTTPS protocol.
   #
-  # = Sending mail
+  # == Sending mail
   #
   # Once a mailer action and template are defined, you can deliver your message or defer its creation and
   # delivery for later:
@@ -150,7 +152,7 @@ module ActionMailer
   #   mail.deliver_now                               # generates and sends the email now
   #
   # The ActionMailer::MessageDelivery class is a wrapper around a delegate that will call
-  # your method to generate the mail. If you want direct access to the delegator, or <tt>Mail::Message</tt>,
+  # your method to generate the mail. If you want direct access to the delegator, or +Mail::Message+,
   # you can call the <tt>message</tt> method on the ActionMailer::MessageDelivery object.
   #
   #   NotifierMailer.welcome(User.first).message     # => a Mail::Message object
@@ -165,7 +167,7 @@ module ActionMailer
   # You never instantiate your mailer class. Rather, you just call the method you defined on the class itself.
   # All instance methods are expected to return a message object to be sent.
   #
-  # = Multipart Emails
+  # == Multipart Emails
   #
   # Multipart messages can also be used implicitly because Action Mailer will automatically detect and use
   # multipart templates, where each template is named after the name of the action, followed by the content
@@ -186,7 +188,7 @@ module ActionMailer
   # This means that you'll have to manually add each part to the email and set the content type of the email
   # to <tt>multipart/alternative</tt>.
   #
-  # = Attachments
+  # == Attachments
   #
   # Sending attachment in emails is easy:
   #
@@ -213,7 +215,7 @@ module ActionMailer
   #       end
   #     end
   #
-  # You can also send attachments with html template, in this case you need to add body, attachments,
+  # You can also send attachments with HTML template, in this case you need to add body, attachments,
   # and custom content type like this:
   #
   #     class NotifierMailer < ApplicationMailer
@@ -226,7 +228,7 @@ module ActionMailer
   #       end
   #     end
   #
-  # = Inline Attachments
+  # == Inline Attachments
   #
   # You can also specify that a file should be displayed inline with other HTML. This is useful
   # if you want to display a corporate logo or a photo.
@@ -252,7 +254,7 @@ module ActionMailer
   #
   #   <%= image_tag attachments['photo.png'].url, alt: 'Our Photo', class: 'photo' -%>
   #
-  # = Observing and Intercepting Mails
+  # == Observing and Intercepting Mails
   #
   # Action Mailer provides hooks into the Mail observer and interceptor methods. These allow you to
   # register classes that are called during the mail delivery life cycle.
@@ -263,9 +265,9 @@ module ActionMailer
   # An interceptor class must implement the <tt>:delivering_email(message)</tt> method which will be
   # called before the email is sent, allowing you to make modifications to the email before it hits
   # the delivery agents. Your class should make any needed modifications directly to the passed
-  # in <tt>Mail::Message</tt> instance.
+  # in +Mail::Message+ instance.
   #
-  # = Default Hash
+  # == Default \Hash
   #
   # Action Mailer provides some intelligent defaults for your emails, these are usually specified in a
   # default method inside the class definition:
@@ -274,15 +276,15 @@ module ActionMailer
   #     default sender: 'system@example.com'
   #   end
   #
-  # You can pass in any header value that a <tt>Mail::Message</tt> accepts. Out of the box,
-  # <tt>ActionMailer::Base</tt> sets the following:
+  # You can pass in any header value that a +Mail::Message+ accepts. Out of the box,
+  # +ActionMailer::Base+ sets the following:
   #
   # * <tt>mime_version: "1.0"</tt>
   # * <tt>charset:      "UTF-8"</tt>
   # * <tt>content_type: "text/plain"</tt>
   # * <tt>parts_order:  [ "text/plain", "text/enriched", "text/html" ]</tt>
   #
-  # <tt>parts_order</tt> and <tt>charset</tt> are not actually valid <tt>Mail::Message</tt> header fields,
+  # <tt>parts_order</tt> and <tt>charset</tt> are not actually valid +Mail::Message+ header fields,
   # but Action Mailer translates them appropriately and sets the correct values.
   #
   # As you can pass in any header, you need to either quote the header as a string, or pass it in as
@@ -314,14 +316,16 @@ module ActionMailer
   #
   #    config.action_mailer.default_options = { from: "no-reply@example.org" }
   #
-  # = Callbacks
+  # == \Callbacks
   #
-  # You can specify callbacks using <tt>before_action</tt> and <tt>after_action</tt> for configuring your messages.
-  # This may be useful, for example, when you want to add default inline attachments for all
-  # messages sent out by a certain mailer class:
+  # You can specify callbacks using <tt>before_action</tt> and <tt>after_action</tt> for configuring your messages,
+  # and using <tt>before_deliver</tt> and <tt>after_deliver</tt> for wrapping the delivery process.
+  # For example, when you want to add default inline attachments and log delivery for all messages
+  # sent out by a certain mailer class:
   #
   #   class NotifierMailer < ApplicationMailer
   #     before_action :add_inline_attachment!
+  #     after_deliver :log_delivery
   #
   #     def welcome
   #       mail
@@ -331,9 +335,13 @@ module ActionMailer
   #       def add_inline_attachment!
   #         attachments.inline["footer.jpg"] = File.read('/path/to/filename.jpg')
   #       end
+  #
+  #       def log_delivery
+  #         Rails.logger.info "Sent email with message id '#{message.message_id}' at #{Time.current}."
+  #       end
   #   end
   #
-  # Callbacks in Action Mailer are implemented using
+  # Action callbacks in Action Mailer are implemented using
   # AbstractController::Callbacks, so you can define and configure
   # callbacks in the same manner that you would use callbacks in classes that
   # inherit from ActionController::Base.
@@ -342,7 +350,7 @@ module ActionMailer
   # using <tt>before_action</tt> rather than <tt>after_action</tt> in your
   # Action Mailer classes so that headers are parsed properly.
   #
-  # = Rescuing Errors
+  # == Rescuing Errors
   #
   # +rescue+ blocks inside of a mailer method cannot rescue errors that occur
   # outside of rendering -- for example, record deserialization errors in a
@@ -365,10 +373,10 @@ module ActionMailer
   #     end
   #   end
   #
-  # = Previewing emails
+  # == Previewing emails
   #
   # You can preview your email templates visually by adding a mailer preview file to the
-  # <tt>ActionMailer::Base.preview_path</tt>. Since most emails do something interesting
+  # <tt>ActionMailer::Base.preview_paths</tt>. Since most emails do something interesting
   # with database data, you'll need to write some scenarios to load messages with fake data:
   #
   #   class NotifierMailerPreview < ActionMailer::Preview
@@ -377,12 +385,12 @@ module ActionMailer
   #     end
   #   end
   #
-  # Methods must return a <tt>Mail::Message</tt> object which can be generated by calling the mailer
+  # Methods must return a +Mail::Message+ object which can be generated by calling the mailer
   # method without the additional <tt>deliver_now</tt> / <tt>deliver_later</tt>. The location of the
-  # mailer previews directory can be configured using the <tt>preview_path</tt> option which has a default
+  # mailer preview directories can be configured using the <tt>preview_paths</tt> option which has a default
   # of <tt>test/mailers/previews</tt>:
   #
-  #   config.action_mailer.preview_path = "#{Rails.root}/lib/mailer_previews"
+  #   config.action_mailer.preview_paths << "#{Rails.root}/lib/mailer_previews"
   #
   # An overview of all previews is accessible at <tt>http://localhost:3000/rails/mailers</tt>
   # on a running development server instance.
@@ -402,7 +410,7 @@ module ActionMailer
   # and <tt>register_preview_interceptor</tt> if they should operate on both sending and
   # previewing emails.
   #
-  # = Configuration options
+  # == Configuration options
   #
   # These options are specified on the class level, like
   # <tt>ActionMailer::Base.raise_delivery_errors = true</tt>
@@ -425,20 +433,21 @@ module ActionMailer
   #     This is a symbol and one of <tt>:plain</tt> (will send the password Base64 encoded), <tt>:login</tt> (will
   #     send the password Base64 encoded) or <tt>:cram_md5</tt> (combines a Challenge/Response mechanism to exchange
   #     information and a cryptographic Message Digest 5 algorithm to hash important information)
-  #   * <tt>:enable_starttls</tt> - Use STARTTLS when connecting to your SMTP server and fail if unsupported. Defaults to <tt>false</tt>.
+  #   * <tt>:enable_starttls</tt> - Use STARTTLS when connecting to your SMTP server and fail if unsupported. Defaults
+  #     to <tt>false</tt>. Requires at least version 2.7 of the Mail gem.
   #   * <tt>:enable_starttls_auto</tt> - Detects if STARTTLS is enabled in your SMTP server and starts
   #     to use it. Defaults to <tt>true</tt>.
   #   * <tt>:openssl_verify_mode</tt> - When using TLS, you can set how OpenSSL checks the certificate. This is
   #     really useful if you need to validate a self-signed and/or a wildcard certificate. You can use the name
   #     of an OpenSSL verify constant (<tt>'none'</tt> or <tt>'peer'</tt>) or directly the constant
-  #     (<tt>OpenSSL::SSL::VERIFY_NONE</tt> or <tt>OpenSSL::SSL::VERIFY_PEER</tt>).
+  #     (+OpenSSL::SSL::VERIFY_NONE+ or +OpenSSL::SSL::VERIFY_PEER+).
   #   * <tt>:ssl/:tls</tt> Enables the SMTP connection to use SMTP/TLS (SMTPS: SMTP over direct TLS connection)
   #   * <tt>:open_timeout</tt> Number of seconds to wait while attempting to open a connection.
   #   * <tt>:read_timeout</tt> Number of seconds to wait until timing-out a read(2) call.
   #
   # * <tt>sendmail_settings</tt> - Allows you to override options for the <tt>:sendmail</tt> delivery method.
   #   * <tt>:location</tt> - The location of the sendmail executable. Defaults to <tt>/usr/sbin/sendmail</tt>.
-  #   * <tt>:arguments</tt> - The command line arguments. Defaults to <tt>-i</tt> with <tt>-f sender@address</tt>
+  #   * <tt>:arguments</tt> - The command line arguments. Defaults to <tt>%w[ -i ]</tt> with <tt>-f sender@address</tt>
   #     added automatically before the message is sent.
   #
   # * <tt>file_settings</tt> - Allows you to override options for the <tt>:file</tt> delivery method.
@@ -459,15 +468,19 @@ module ActionMailer
   # * <tt>deliveries</tt> - Keeps an array of all the emails sent out through the Action Mailer with
   #   <tt>delivery_method :test</tt>. Most useful for unit and functional testing.
   #
-  # * <tt>delivery_job</tt> - The job class used with <tt>deliver_later</tt>. Defaults to
-  #   +ActionMailer::MailDeliveryJob+.
+  # * <tt>delivery_job</tt> - The job class used with <tt>deliver_later</tt>. Mailers can set this to use a
+  #   custom delivery job. Defaults to +ActionMailer::MailDeliveryJob+.
   #
-  # * <tt>deliver_later_queue_name</tt> - The name of the queue used with <tt>deliver_later</tt>.
+  # * <tt>deliver_later_queue_name</tt> - The queue name used by <tt>deliver_later</tt> with the default
+  #   <tt>delivery_job</tt>. Mailers can set this to use a custom queue name.
   class Base < AbstractController::Base
+    include Callbacks
     include DeliveryMethods
+    include QueuedDelivery
     include Rescuable
     include Parameterized
     include Previews
+    include FormBuilder
 
     abstract!
 
@@ -486,7 +499,6 @@ module ActionMailer
 
     helper ActionMailer::MailHelper
 
-    class_attribute :delivery_job, default: ::ActionMailer::MailDeliveryJob
     class_attribute :default_params, default: {
       mime_version: "1.0",
       charset:      "UTF-8",
@@ -576,11 +588,11 @@ module ActionMailer
       #    config.action_mailer.default_options = { from: "no-reply@example.org" }
       alias :default_options= :default
 
-      # Wraps an email delivery inside of <tt>ActiveSupport::Notifications</tt> instrumentation.
+      # Wraps an email delivery inside of ActiveSupport::Notifications instrumentation.
       #
-      # This method is actually called by the <tt>Mail::Message</tt> object itself
-      # through a callback when you call <tt>:deliver</tt> on the <tt>Mail::Message</tt>,
-      # calling +deliver_mail+ directly and passing a <tt>Mail::Message</tt> will do
+      # This method is actually called by the +Mail::Message+ object itself
+      # through a callback when you call <tt>:deliver</tt> on the +Mail::Message+,
+      # calling +deliver_mail+ directly and passing a +Mail::Message+ will do
       # nothing except tell the logger you sent the email.
       def deliver_mail(mail) # :nodoc:
         ActiveSupport::Notifications.instrument("deliver.action_mailer") do |payload|
@@ -613,17 +625,16 @@ module ActionMailer
         payload[:perform_deliveries] = mail.perform_deliveries
       end
 
-      def method_missing(method_name, *args)
-        if action_methods.include?(method_name.to_s)
-          MessageDelivery.new(self, method_name, *args)
+      def method_missing(method_name, ...)
+        if action_methods.include?(method_name.name)
+          MessageDelivery.new(self, method_name, ...)
         else
           super
         end
       end
-      ruby2_keywords(:method_missing)
 
       def respond_to_missing?(method, include_all = false)
-        action_methods.include?(method.to_s) || super
+        action_methods.include?(method.name) || super
       end
     end
 
@@ -657,7 +668,7 @@ module ActionMailer
         true
       end
 
-      def method_missing(*args)
+      def method_missing(...)
         nil
       end
     end
@@ -674,18 +685,18 @@ module ActionMailer
       self.class.email_address_with_name(address, name)
     end
 
-    # Allows you to pass random and unusual headers to the new <tt>Mail::Message</tt>
+    # Allows you to pass random and unusual headers to the new +Mail::Message+
     # object which will add them to itself.
     #
     #   headers['X-Special-Domain-Specific-Header'] = "SecretValue"
     #
     # You can also pass a hash into headers of header field names and values,
-    # which will then be set on the <tt>Mail::Message</tt> object:
+    # which will then be set on the +Mail::Message+ object:
     #
     #   headers 'X-Special-Domain-Specific-Header' => "SecretValue",
     #           'In-Reply-To' => incoming.message_id
     #
-    # The resulting <tt>Mail::Message</tt> will have the following in its header:
+    # The resulting +Mail::Message+ will have the following in its header:
     #
     #   X-Special-Domain-Specific-Header: SecretValue
     #
@@ -772,7 +783,7 @@ module ActionMailer
     # the most used headers in an email message, these are:
     #
     # * +:subject+ - The subject of the message, if this is omitted, Action Mailer will
-    #   ask the Rails I18n class for a translated +:subject+ in the scope of
+    #   ask the \Rails I18n class for a translated +:subject+ in the scope of
     #   <tt>[mailer_scope, action_name]</tt> or if this is missing, will translate the
     #   humanized version of the +action_name+
     # * +:to+ - Who the message is destined for, can be a string of addresses, or an array
@@ -809,7 +820,7 @@ module ActionMailer
     # templates in the view paths using by default the mailer name and the
     # method name that it is being called from, it will then create parts for
     # each of these templates intelligently, making educated guesses on correct
-    # content type and sequence, and return a fully prepared <tt>Mail::Message</tt>
+    # content type and sequence, and return a fully prepared +Mail::Message+
     # ready to call <tt>:deliver</tt> on to send.
     #
     # For example:
@@ -918,7 +929,7 @@ module ActionMailer
         end
       end
 
-      # Translates the +subject+ using Rails I18n class under <tt>[mailer_scope, action_name]</tt> scope.
+      # Translates the +subject+ using \Rails I18n class under <tt>[mailer_scope, action_name]</tt> scope.
       # If it does not find a translation for the +subject+ under the specified scope it will default to a
       # humanized version of the <tt>action_name</tt>.
       # If the subject has interpolations, you can pass them through the +interpolations+ parameter.

data/lib/action_mailer/callbacks.rb

@@ -0,0 +1,31 @@
+# frozen_string_literal: true
+
+module ActionMailer
+  module Callbacks
+    extend ActiveSupport::Concern
+
+    included do
+      include ActiveSupport::Callbacks
+      define_callbacks :deliver, skip_after_callbacks_if_terminated: true
+    end
+
+    module ClassMethods
+      # Defines a callback that will get called right before the
+      # message is sent to the delivery method.
+      def before_deliver(*filters, &blk)
+        set_callback(:deliver, :before, *filters, &blk)
+      end
+
+      # Defines a callback that will get called right after the
+      # message's delivery method is finished.
+      def after_deliver(*filters, &blk)
+        set_callback(:deliver, :after, *filters, &blk)
+      end
+
+      # Defines a callback that will get called around the message's deliver method.
+      def around_deliver(*filters, &blk)
+        set_callback(:deliver, :around, *filters, &blk)
+      end
+    end
+  end
+end

data/lib/action_mailer/delivery_methods.rb

@@ -3,6 +3,8 @@
 require "tmpdir"
 
 module ActionMailer
+  # = Action Mailer \DeliveryMethods
+  #
   # This module handles everything related to mail delivery, from registering
   # new delivery methods to configuring the mail object to be sent.
   module DeliveryMethods
@@ -12,7 +14,6 @@ module ActionMailer
       # Do not make this inheritable, because we always want it to propagate
       cattr_accessor :raise_delivery_errors, default: true
       cattr_accessor :perform_deliveries, default: true
-      cattr_accessor :deliver_later_queue_name, default: :mailers
 
       class_attribute :delivery_methods, default: {}.freeze
       class_attribute :delivery_method, default: :smtp
@@ -31,7 +32,7 @@ module ActionMailer
 
       add_delivery_method :sendmail, Mail::Sendmail,
         location:  "/usr/sbin/sendmail",
-        arguments: "-i"
+        arguments: %w[-i]
 
       add_delivery_method :test, Mail::TestMailer
     end
@@ -46,7 +47,7 @@ module ActionMailer
       #
       #   add_delivery_method :sendmail, Mail::Sendmail,
       #     location:  '/usr/sbin/sendmail',
-      #     arguments: '-i'
+      #     arguments: %w[ -i ]
       def add_delivery_method(symbol, klass, default_options = {})
         class_attribute(:"#{symbol}_settings") unless respond_to?(:"#{symbol}_settings")
         public_send(:"#{symbol}_settings=", default_options)

data/lib/action_mailer/deprecator.rb

@@ -0,0 +1,7 @@
+# frozen_string_literal: true
+
+module ActionMailer
+  def self.deprecator # :nodoc:
+    @deprecator ||= ActiveSupport::Deprecation.new
+  end
+end