abiquo-installer-tests 20120104 → 20121023.3

data/vendor/net-ssh-2.5.2/lib/net/ssh/transport/server_version.rb

@@ -0,0 +1,71 @@
+require 'net/ssh/errors'
+require 'net/ssh/loggable'
+require 'net/ssh/version'
+
+module Net; module SSH; module Transport
+
+  # Negotiates the SSH protocol version and trades information about server
+  # and client. This is never used directly--it is always called by the
+  # transport layer as part of the initialization process of the transport
+  # layer.
+  #
+  # Note that this class also encapsulates the negotiated version, and acts as
+  # the authoritative reference for any queries regarding the version in effect.
+  class ServerVersion
+    include Loggable
+
+    # The SSH version string as reported by Net::SSH
+    PROTO_VERSION = "SSH-2.0-Ruby/Net::SSH_#{Net::SSH::Version::CURRENT} #{RUBY_PLATFORM}"
+
+    # Any header text sent by the server prior to sending the version.
+    attr_reader :header
+
+    # The version string reported by the server.
+    attr_reader :version
+
+    # Instantiates a new ServerVersion and immediately (and synchronously)
+    # negotiates the SSH protocol in effect, using the given socket.
+    def initialize(socket, logger)
+      @header = ""
+      @version = nil
+      @logger = logger
+      negotiate!(socket)
+    end
+
+    private
+
+      # Negotiates the SSH protocol to use, via the given socket. If the server
+      # reports an incompatible SSH version (e.g., SSH1), this will raise an
+      # exception.
+      def negotiate!(socket)
+        info { "negotiating protocol version" }
+
+        loop do
+          @version = ""
+          loop do
+            begin
+              b = socket.readpartial(1)
+              raise Net::SSH::Disconnect, "connection closed by remote host" if b.nil?
+            rescue EOFError => e
+              raise Net::SSH::Disconnect, "connection closed by remote host"
+            end
+            @version << b
+            break if b == "\n"
+          end
+          break if @version.match(/^SSH-/)
+          @header << @version
+        end
+
+        @version.chomp!
+        debug { "remote is `#{@version}'" }
+
+        unless @version.match(/^SSH-(1\.99|2\.0)-/)
+          raise Net::SSH::Exception, "incompatible SSH version `#{@version}'"
+        end
+
+        debug { "local is `#{PROTO_VERSION}'" }
+        socket.write "#{PROTO_VERSION}\r\n"
+        socket.flush
+      end
+  end
+end; end; end

data/vendor/net-ssh-2.5.2/lib/net/ssh/transport/session.rb

@@ -0,0 +1,278 @@
+require 'socket'
+require 'timeout'
+
+require 'net/ssh/errors'
+require 'net/ssh/loggable'
+require 'net/ssh/version'
+require 'net/ssh/transport/algorithms'
+require 'net/ssh/transport/constants'
+require 'net/ssh/transport/packet_stream'
+require 'net/ssh/transport/server_version'
+require 'net/ssh/verifiers/null'
+require 'net/ssh/verifiers/strict'
+require 'net/ssh/verifiers/lenient'
+
+module Net; module SSH; module Transport
+
+  # The transport layer represents the lowest level of the SSH protocol, and
+  # implements basic message exchanging and protocol initialization. It will
+  # never be instantiated directly (unless you really know what you're about),
+  # but will instead be created for you automatically when you create a new
+  # SSH session via Net::SSH.start.
+  class Session
+    include Constants, Loggable
+
+    # The standard port for the SSH protocol.
+    DEFAULT_PORT = 22
+
+    # The host to connect to, as given to the constructor.
+    attr_reader :host
+
+    # The port number to connect to, as given in the options to the constructor.
+    # If no port number was given, this will default to DEFAULT_PORT.
+    attr_reader :port
+
+    # The underlying socket object being used to communicate with the remote
+    # host.
+    attr_reader :socket
+
+    # The ServerVersion instance that encapsulates the negotiated protocol
+    # version.
+    attr_reader :server_version
+
+    # The Algorithms instance used to perform key exchanges.
+    attr_reader :algorithms
+
+    # The host-key verifier object used to verify host keys, to ensure that
+    # the connection is not being spoofed.
+    attr_reader :host_key_verifier
+
+    # The hash of options that were given to the object at initialization.
+    attr_reader :options
+
+    # Instantiates a new transport layer abstraction. This will block until
+    # the initial key exchange completes, leaving you with a ready-to-use
+    # transport session.
+    def initialize(host, options={})
+      self.logger = options[:logger]
+
+      @host = host
+      @port = options[:port] || DEFAULT_PORT
+      @bind_address = options[:bind_address] || nil
+      @options = options
+
+      debug { "establishing connection to #{@host}:#{@port}" }
+      factory = options[:proxy] || TCPSocket
+      @socket = timeout(options[:timeout] || 0) { @bind_address.nil? || options[:proxy] ? factory.open(@host, @port) : factory.open(@host,@port,@bind_address) }
+      @socket.extend(PacketStream)
+      @socket.logger = @logger
+
+      debug { "connection established" }
+
+      @queue = []
+
+      @host_key_verifier = select_host_key_verifier(options[:paranoid])
+
+
+      @server_version = timeout(options[:timeout] || 0) { ServerVersion.new(socket, logger) }
+
+      @algorithms = Algorithms.new(self, options)
+      wait { algorithms.initialized? }
+    end
+
+    # Returns the host (and possibly IP address) in a format compatible with
+    # SSH known-host files.
+    def host_as_string
+      @host_as_string ||= begin
+        string = "#{host}"
+        string = "[#{string}]:#{port}" if port != DEFAULT_PORT
+        if socket.peer_ip != host
+          string2 = socket.peer_ip
+          string2 = "[#{string2}]:#{port}" if port != DEFAULT_PORT
+          string << "," << string2
+        end
+        string
+      end
+    end
+
+    # Returns true if the underlying socket has been closed.
+    def closed?
+      socket.closed?
+    end
+
+    # Cleans up (see PacketStream#cleanup) and closes the underlying socket.
+    def close
+      socket.cleanup
+      socket.close
+    end
+
+    # Performs a "hard" shutdown of the connection. In general, this should
+    # never be done, but it might be necessary (in a rescue clause, for instance,
+    # when the connection needs to close but you don't know the status of the
+    # underlying protocol's state).
+    def shutdown!
+      error { "forcing connection closed" }
+      socket.close
+    end
+
+    # Returns a new service_request packet for the given service name, ready
+    # for sending to the server.
+    def service_request(service)
+      Net::SSH::Buffer.from(:byte, SERVICE_REQUEST, :string, service)
+    end
+
+    # Requests a rekey operation, and blocks until the operation completes.
+    # If a rekey is already pending, this returns immediately, having no
+    # effect.
+    def rekey!
+      if !algorithms.pending?
+        algorithms.rekey!
+        wait { algorithms.initialized? }
+      end
+    end
+
+    # Returns immediately if a rekey is already in process. Otherwise, if a
+    # rekey is needed (as indicated by the socket, see PacketStream#if_needs_rekey?)
+    # one is performed, causing this method to block until it completes.
+    def rekey_as_needed
+      return if algorithms.pending?
+      socket.if_needs_rekey? { rekey! }
+    end
+
+    # Returns a hash of information about the peer (remote) side of the socket,
+    # including :ip, :port, :host, and :canonized (see #host_as_string).
+    def peer
+      @peer ||= { :ip => socket.peer_ip, :port => @port.to_i, :host => @host, :canonized => host_as_string }
+    end
+
+    # Blocks until a new packet is available to be read, and returns that
+    # packet. See #poll_message.
+    def next_message
+      poll_message(:block)
+    end
+
+    # Tries to read the next packet from the socket. If mode is :nonblock (the
+    # default), this will not block and will return nil if there are no packets
+    # waiting to be read. Otherwise, this will block until a packet is
+    # available. Note that some packet types (DISCONNECT, IGNORE, UNIMPLEMENTED,
+    # DEBUG, and KEXINIT) are handled silently by this method, and will never
+    # be returned.
+    #
+    # If a key-exchange is in process and a disallowed packet type is
+    # received, it will be enqueued and otherwise ignored. When a key-exchange
+    # is not in process, and consume_queue is true, packets will be first
+    # read from the queue before the socket is queried.
+    def poll_message(mode=:nonblock, consume_queue=true)
+      loop do
+        if consume_queue && @queue.any? && algorithms.allow?(@queue.first)
+          return @queue.shift
+        end
+
+        packet = socket.next_packet(mode)
+        return nil if packet.nil?
+
+        case packet.type
+        when DISCONNECT
+          raise Net::SSH::Disconnect, "disconnected: #{packet[:description]} (#{packet[:reason_code]})"
+
+        when IGNORE
+          debug { "IGNORE packet recieved: #{packet[:data].inspect}" }
+
+        when UNIMPLEMENTED
+          lwarn { "UNIMPLEMENTED: #{packet[:number]}" }
+
+        when DEBUG
+          send(packet[:always_display] ? :fatal : :debug) { packet[:message] }
+
+        when KEXINIT
+          algorithms.accept_kexinit(packet)
+
+        else
+          return packet if algorithms.allow?(packet)
+          push(packet)
+        end
+      end
+    end
+
+    # Waits (blocks) until the given block returns true. If no block is given,
+    # this just waits long enough to see if there are any pending packets. Any
+    # packets read are enqueued (see #push).
+    def wait
+      loop do
+        break if block_given? && yield
+        message = poll_message(:nonblock, false)
+        push(message) if message
+        break if !block_given?
+      end
+    end
+
+    # Adds the given packet to the packet queue. If the queue is non-empty,
+    # #poll_message will return packets from the queue in the order they
+    # were received.
+    def push(packet)
+      @queue.push(packet)
+    end
+
+    # Sends the given message via the packet stream, blocking until the
+    # entire message has been sent.
+    def send_message(message)
+      socket.send_packet(message)
+    end
+
+    # Enqueues the given message, such that it will be sent at the earliest
+    # opportunity. This does not block, but returns immediately.
+    def enqueue_message(message)
+      socket.enqueue_packet(message)
+    end
+
+    # Configure's the packet stream's client state with the given set of
+    # options. This is typically used to define the cipher, compression, and
+    # hmac algorithms to use when sending packets to the server.
+    def configure_client(options={})
+      socket.client.set(options)
+    end
+
+    # Configure's the packet stream's server state with the given set of
+    # options. This is typically used to define the cipher, compression, and
+    # hmac algorithms to use when reading packets from the server.
+    def configure_server(options={})
+      socket.server.set(options)
+    end
+
+    # Sets a new hint for the packet stream, which the packet stream may use
+    # to change its behavior. (See PacketStream#hints).
+    def hint(which, value=true)
+      socket.hints[which] = value
+    end
+
+    public
+
+      # this method is primarily for use in tests
+      attr_reader :queue #:nodoc:
+
+    private
+
+      # Instantiates a new host-key verification class, based on the value of
+      # the parameter. When true or nil, the default Lenient verifier is
+      # returned. If it is false, the Null verifier is returned, and if it is
+      # :very, the Strict verifier is returned. If the argument happens to
+      # respond to :verify, it is returned directly. Otherwise, an exception
+      # is raised.
+      def select_host_key_verifier(paranoid)
+        case paranoid
+        when true, nil then
+          Net::SSH::Verifiers::Lenient.new
+        when false then
+          Net::SSH::Verifiers::Null.new
+        when :very then
+          Net::SSH::Verifiers::Strict.new
+        else
+          if paranoid.respond_to?(:verify)
+            paranoid
+          else
+            raise ArgumentError, "argument to :paranoid is not valid: #{paranoid.inspect}"
+          end
+        end
+      end
+  end
+end; end; end

data/vendor/net-ssh-2.5.2/lib/net/ssh/transport/state.rb

@@ -0,0 +1,206 @@
+require 'zlib'
+require 'net/ssh/transport/cipher_factory'
+require 'net/ssh/transport/hmac'
+
+module Net; module SSH; module Transport
+
+  # Encapsulates state information about one end of an SSH connection. Such
+  # state includes the packet sequence number, the algorithms in use, how
+  # many packets and blocks have been processed since the last reset, and so
+  # forth. This class will never be instantiated directly, but is used as
+  # part of the internal state of the PacketStream module.
+  class State
+    # The socket object that owns this state object.
+    attr_reader :socket
+
+    # The next packet sequence number for this socket endpoint.
+    attr_reader :sequence_number
+
+    # The hmac algorithm in use for this endpoint.
+    attr_reader :hmac
+
+    # The compression algorithm in use for this endpoint.
+    attr_reader :compression
+
+    # The compression level to use when compressing data (or nil, for the default).
+    attr_reader :compression_level
+
+    # The number of packets processed since the last call to #reset!
+    attr_reader :packets
+
+    # The number of data blocks processed since the last call to #reset!
+    attr_reader :blocks
+
+    # The cipher algorithm in use for this socket endpoint.
+    attr_reader :cipher
+
+    # The block size for the cipher
+    attr_reader :block_size
+
+    # The role that this state plays (either :client or :server)
+    attr_reader :role
+
+    # The maximum number of packets that this endpoint wants to process before
+    # needing a rekey.
+    attr_accessor :max_packets
+
+    # The maximum number of blocks that this endpoint wants to process before
+    # needing a rekey.
+    attr_accessor :max_blocks
+
+    # The user-specified maximum number of bytes that this endpoint ought to
+    # process before needing a rekey.
+    attr_accessor :rekey_limit
+
+    # Creates a new state object, belonging to the given socket. Initializes
+    # the algorithms to "none".
+    def initialize(socket, role)
+      @socket = socket
+      @role = role
+      @sequence_number = @packets = @blocks = 0
+      @cipher = CipherFactory.get("none")
+      @block_size = 8
+      @hmac = HMAC.get("none")
+      @compression = nil
+      @compressor = @decompressor = nil
+      @next_iv = ""
+    end
+
+    # A convenience method for quickly setting multiple values in a single
+    # command.
+    def set(values)
+      values.each do |key, value|
+        instance_variable_set("@#{key}", value)
+      end
+      reset!
+    end
+
+    def update_cipher(data)
+      result = cipher.update(data)
+      update_next_iv(role == :client ? result : data)
+      return result
+    end
+
+    def final_cipher
+      result = cipher.final
+      update_next_iv(role == :client ? result : "", true)
+      return result
+    end
+
+    # Increments the counters. The sequence number is incremented (and remapped
+    # so it always fits in a 32-bit integer). The number of packets and blocks
+    # are also incremented.
+    def increment(packet_length)
+      @sequence_number = (@sequence_number + 1) & 0xFFFFFFFF
+      @packets += 1
+      @blocks += (packet_length + 4) / @block_size
+    end
+
+    # The compressor object to use when compressing data. This takes into account
+    # the desired compression level.
+    def compressor
+      @compressor ||= Zlib::Deflate.new(compression_level || Zlib::DEFAULT_COMPRESSION)
+    end
+
+    # The decompressor object to use when decompressing data.
+    def decompressor
+      @decompressor ||= Zlib::Inflate.new(nil)
+    end
+
+    # Returns true if data compression/decompression is enabled. This will
+    # return true if :standard compression is selected, or if :delayed
+    # compression is selected and the :authenticated hint has been received
+    # by the socket.
+    def compression?
+      compression == :standard || (compression == :delayed && socket.hints[:authenticated])
+    end
+
+    # Compresses the data. If no compression is in effect, this will just return
+    # the data unmodified, otherwise it uses #compressor to compress the data.
+    def compress(data)
+      data = data.to_s
+      return data unless compression?
+      compressor.deflate(data, Zlib::SYNC_FLUSH)
+    end
+
+    # Deompresses the data. If no compression is in effect, this will just return
+    # the data unmodified, otherwise it uses #decompressor to decompress the data.
+    def decompress(data)
+      data = data.to_s
+      return data unless compression?
+      decompressor.inflate(data)
+    end
+
+    # Resets the counters on the state object, but leaves the sequence_number
+    # unchanged. It also sets defaults for and recomputes the max_packets and
+    # max_blocks values.
+    def reset!
+      @packets = @blocks = 0
+
+      @max_packets ||= 1 << 31
+
+      @block_size = cipher.name == "RC4" ? 8 : cipher.block_size
+
+      if max_blocks.nil?
+        # cargo-culted from openssh. the idea is that "the 2^(blocksize*2)
+        # limit is too expensive for 3DES, blowfish, etc., so enforce a 1GB
+        # limit for small blocksizes."
+        if @block_size >= 16
+          @max_blocks = 1 << (@block_size * 2)
+        else
+          @max_blocks = (1 << 30) / @block_size
+        end
+
+        # if a limit on the # of bytes has been given, convert that into a
+        # minimum number of blocks processed.
+
+        if rekey_limit
+          @max_blocks = [@max_blocks, rekey_limit / @block_size].min
+        end
+      end
+
+      cleanup
+    end
+
+    # Closes any the compressor and/or decompressor objects that have been
+    # instantiated.
+    def cleanup
+      if @compressor
+        @compressor.finish if !@compressor.finished?
+        @compressor.close
+      end
+
+      if @decompressor
+        # we call reset here so that we don't get warnings when we try to
+        # close the decompressor
+        @decompressor.reset
+        @decompressor.close
+      end
+
+      @compressor = @decompressor = nil
+    end
+
+    # Returns true if the number of packets processed exceeds the maximum
+    # number of packets, or if the number of blocks processed exceeds the
+    # maximum number of blocks.
+    def needs_rekey?
+      max_packets && packets > max_packets ||
+      max_blocks && blocks > max_blocks
+    end
+
+    private
+
+      def update_next_iv(data, reset=false)
+        @next_iv << data
+        @next_iv = @next_iv[-cipher.iv_len..-1]
+
+        if reset
+          cipher.reset
+          cipher.iv = @next_iv
+        end
+
+        return data
+      end
+  end
+
+end; end; end