Pr0d1r2-geokit 1.3.2

data/lib/geokit/mappable.rb

@@ -0,0 +1,493 @@
+#require 'forwardable'
+
+module Geokit     
+  # Contains class and instance methods providing distance calcuation services.  This
+  # module is meant to be mixed into classes containing lat and lng attributes where
+  # distance calculation is desired.  
+  # 
+  # At present, two forms of distance calculations are provided:
+  # 
+  # * Pythagorean Theory (flat Earth) - which assumes the world is flat and loses accuracy over long distances.
+  # * Haversine (sphere) - which is fairly accurate, but at a performance cost.
+  # 
+  # Distance units supported are :miles, :kms, and :nms.
+  module Mappable
+    PI_DIV_RAD = 0.0174
+    KMS_PER_MILE = 1.609
+    NMS_PER_MILE = 0.868976242
+    EARTH_RADIUS_IN_MILES = 3963.19
+    EARTH_RADIUS_IN_KMS = EARTH_RADIUS_IN_MILES * KMS_PER_MILE
+    EARTH_RADIUS_IN_NMS = EARTH_RADIUS_IN_MILES * NMS_PER_MILE
+    MILES_PER_LATITUDE_DEGREE = 69.1
+    KMS_PER_LATITUDE_DEGREE = MILES_PER_LATITUDE_DEGREE * KMS_PER_MILE
+    NMS_PER_LATITUDE_DEGREE = MILES_PER_LATITUDE_DEGREE * NMS_PER_MILE
+    LATITUDE_DEGREES = EARTH_RADIUS_IN_MILES / MILES_PER_LATITUDE_DEGREE  
+    
+    # Mix below class methods into the includer.
+    def self.included(receiver) # :nodoc:
+      receiver.extend ClassMethods
+    end   
+    
+    module ClassMethods #:nodoc:
+      # Returns the distance between two points.  The from and to parameters are
+      # required to have lat and lng attributes.  Valid options are:
+      # :units - valid values are :miles, :kms, :nms (Geokit::default_units is the default)
+      # :formula - valid values are :flat or :sphere (Geokit::default_formula is the default)
+      def distance_between(from, to, options={})
+        from=Geokit::LatLng.normalize(from)
+        to=Geokit::LatLng.normalize(to)
+        return 0.0 if from == to # fixes a "zero-distance" bug
+        units = options[:units] || Geokit::default_units
+        formula = options[:formula] || Geokit::default_formula
+        case formula
+        when :sphere
+          begin
+            units_sphere_multiplier(units) * 
+                Math.acos( Math.sin(deg2rad(from.lat)) * Math.sin(deg2rad(to.lat)) + 
+                Math.cos(deg2rad(from.lat)) * Math.cos(deg2rad(to.lat)) * 
+                Math.cos(deg2rad(to.lng) - deg2rad(from.lng)))
+          rescue Errno::EDOM
+            0.0
+          end
+        when :flat
+          Math.sqrt((units_per_latitude_degree(units)*(from.lat-to.lat))**2 + 
+              (units_per_longitude_degree(from.lat, units)*(from.lng-to.lng))**2)
+        end
+      end
+
+      # Returns heading in degrees (0 is north, 90 is east, 180 is south, etc)
+      # from the first point to the second point. Typicaly, the instance methods will be used 
+      # instead of this method.
+      def heading_between(from,to)
+        from=Geokit::LatLng.normalize(from)
+        to=Geokit::LatLng.normalize(to)
+
+        d_lng=deg2rad(to.lng-from.lng)
+        from_lat=deg2rad(from.lat)
+        to_lat=deg2rad(to.lat) 
+        y=Math.sin(d_lng) * Math.cos(to_lat)
+        x=Math.cos(from_lat)*Math.sin(to_lat)-Math.sin(from_lat)*Math.cos(to_lat)*Math.cos(d_lng)
+        heading=to_heading(Math.atan2(y,x))
+      end
+  
+      # Given a start point, distance, and heading (in degrees), provides
+      # an endpoint. Returns a LatLng instance. Typically, the instance method
+      # will be used instead of this method.
+      def endpoint(start,heading, distance, options={})
+        units = options[:units] || Geokit::default_units
+        radius = case units
+          when :kms; EARTH_RADIUS_IN_KMS
+          when :nms; EARTH_RADIUS_IN_NMS
+          else EARTH_RADIUS_IN_MILES
+        end
+        start=Geokit::LatLng.normalize(start)        
+        lat=deg2rad(start.lat)
+        lng=deg2rad(start.lng)
+        heading=deg2rad(heading)
+        distance=distance.to_f
+        
+        end_lat=Math.asin(Math.sin(lat)*Math.cos(distance/radius) +
+                          Math.cos(lat)*Math.sin(distance/radius)*Math.cos(heading))
+
+        end_lng=lng+Math.atan2(Math.sin(heading)*Math.sin(distance/radius)*Math.cos(lat),
+                               Math.cos(distance/radius)-Math.sin(lat)*Math.sin(end_lat))
+
+        LatLng.new(rad2deg(end_lat),rad2deg(end_lng))
+      end
+
+      # Returns the midpoint, given two points. Returns a LatLng. 
+      # Typically, the instance method will be used instead of this method.
+      # Valid option:
+      #   :units - valid values are :miles, :kms, or :nms (:miles is the default)
+      def midpoint_between(from,to,options={})
+        from=Geokit::LatLng.normalize(from)
+
+        units = options[:units] || Geokit::default_units
+        
+        heading=from.heading_to(to)
+        distance=from.distance_to(to,options)
+        midpoint=from.endpoint(heading,distance/2,options)
+      end
+  
+      # Geocodes a location using the multi geocoder.
+      def geocode(location)
+        res = Geocoders::MultiGeocoder.geocode(location)
+        return res if res.success?
+        raise Geokit::Geocoders::GeocodeError      
+      end
+    
+      protected
+    
+      def deg2rad(degrees)
+        degrees.to_f / 180.0 * Math::PI
+      end
+      
+      def rad2deg(rad)
+        rad.to_f * 180.0 / Math::PI 
+      end
+      
+      def to_heading(rad)
+        (rad2deg(rad)+360)%360
+      end
+
+      # Returns the multiplier used to obtain the correct distance units.
+      def units_sphere_multiplier(units)
+        case units
+          when :kms; EARTH_RADIUS_IN_KMS
+          when :nms; EARTH_RADIUS_IN_NMS
+          else EARTH_RADIUS_IN_MILES
+        end
+      end
+
+      # Returns the number of units per latitude degree.
+      def units_per_latitude_degree(units)
+        case units
+          when :kms; KMS_PER_LATITUDE_DEGREE
+          when :nms; NMS_PER_LATITUDE_DEGREE
+          else MILES_PER_LATITUDE_DEGREE
+        end
+      end
+    
+      # Returns the number units per longitude degree.
+      def units_per_longitude_degree(lat, units)
+        miles_per_longitude_degree = (LATITUDE_DEGREES * Math.cos(lat * PI_DIV_RAD)).abs
+        case units
+          when :kms; miles_per_longitude_degree * KMS_PER_MILE
+          when :nms; miles_per_longitude_degree * NMS_PER_MILE
+          else miles_per_longitude_degree
+        end
+      end  
+    end
+  
+    # -----------------------------------------------------------------------------------------------
+    # Instance methods below here
+    # -----------------------------------------------------------------------------------------------
+  
+    # Extracts a LatLng instance. Use with models that are acts_as_mappable
+    def to_lat_lng
+      return self if instance_of?(Geokit::LatLng) || instance_of?(Geokit::GeoLoc)
+      return LatLng.new(send(self.class.lat_column_name),send(self.class.lng_column_name)) if self.class.respond_to?(:acts_as_mappable)
+      nil
+    end
+
+    # Returns the distance from another point.  The other point parameter is
+    # required to have lat and lng attributes.  Valid options are:
+    # :units - valid values are :miles, :kms, :or :nms (:miles is the default)
+    # :formula - valid values are :flat or :sphere (:sphere is the default)
+    def distance_to(other, options={})
+      self.class.distance_between(self, other, options)
+    end  
+    alias distance_from distance_to
+
+    # Returns heading in degrees (0 is north, 90 is east, 180 is south, etc)
+    # to the given point. The given point can be a LatLng or a string to be Geocoded 
+    def heading_to(other)
+      self.class.heading_between(self,other)
+    end
+
+    # Returns heading in degrees (0 is north, 90 is east, 180 is south, etc)
+    # FROM the given point. The given point can be a LatLng or a string to be Geocoded 
+    def heading_from(other)
+      self.class.heading_between(other,self)
+    end
+ 
+    # Returns the endpoint, given a heading (in degrees) and distance.  
+    # Valid option:
+    # :units - valid values are :miles, :kms, or :nms (:miles is the default)
+    def endpoint(heading,distance,options={})
+      self.class.endpoint(self,heading,distance,options)  
+    end
+
+    # Returns the midpoint, given another point on the map.  
+    # Valid option:
+    # :units - valid values are :miles, :kms, or :nms (:miles is the default)    
+    def midpoint_to(other, options={})
+      self.class.midpoint_between(self,other,options)
+    end
+    
+  end
+
+  class LatLng 
+    include Mappable
+
+    attr_accessor :lat, :lng
+
+    # Accepts latitude and longitude or instantiates an empty instance
+    # if lat and lng are not provided. Converted to floats if provided
+    def initialize(lat=nil, lng=nil)
+      lat = lat.to_f if lat && !lat.is_a?(Numeric)
+      lng = lng.to_f if lng && !lng.is_a?(Numeric)
+      @lat = lat
+      @lng = lng
+    end 
+
+    # Latitude attribute setter; stored as a float.
+    def lat=(lat)
+      @lat = lat.to_f if lat
+    end
+
+    # Longitude attribute setter; stored as a float;
+    def lng=(lng)
+      @lng=lng.to_f if lng
+    end  
+
+    # Returns the lat and lng attributes as a comma-separated string.
+    def ll
+      "#{lat},#{lng}"
+    end
+    
+    #returns a string with comma-separated lat,lng values
+    def to_s
+      ll
+    end
+  
+    #returns a two-element array
+    def to_a
+      [lat,lng]
+    end
+    # Returns true if the candidate object is logically equal.  Logical equivalence
+    # is true if the lat and lng attributes are the same for both objects.
+    def ==(other)
+      other.is_a?(LatLng) ? self.lat == other.lat && self.lng == other.lng : false
+    end
+    
+    def hash
+      lat.hash + lng.hash
+    end
+    
+    def eql?(other)
+      self == other
+    end
+    
+    # A *class* method to take anything which can be inferred as a point and generate
+    # a LatLng from it. You should use this anything you're not sure what the input is,
+    # and want to deal with it as a LatLng if at all possible. Can take:
+    #  1) two arguments (lat,lng)
+    #  2) a string in the format "37.1234,-129.1234" or "37.1234 -129.1234"
+    #  3) a string which can be geocoded on the fly
+    #  4) an array in the format [37.1234,-129.1234]
+    #  5) a LatLng or GeoLoc (which is just passed through as-is)
+    #  6) anything which acts_as_mappable -- a LatLng will be extracted from it
+    def self.normalize(thing,other=nil)
+      # if an 'other' thing is supplied, normalize the input by creating an array of two elements
+      thing=[thing,other] if other
+      
+      if thing.is_a?(String)
+        thing.strip!
+        if match=thing.match(/(\-?\d+\.?\d*)[, ] ?(\-?\d+\.?\d*)$/)
+          return Geokit::LatLng.new(match[1],match[2])
+        else
+          res = Geokit::Geocoders::MultiGeocoder.geocode(thing)
+          return res if res.success?
+          raise Geokit::Geocoders::GeocodeError  
+        end
+      elsif thing.is_a?(Array) && thing.size==2
+        return Geokit::LatLng.new(thing[0],thing[1])
+      elsif thing.is_a?(LatLng) # will also be true for GeoLocs
+        return thing
+      elsif thing.class.respond_to?(:acts_as_mappable) && thing.class.respond_to?(:distance_column_name)
+        return thing.to_lat_lng
+      end
+      
+      raise ArgumentError.new("#{thing} (#{thing.class}) cannot be normalized to a LatLng. We tried interpreting it as an array, string, Mappable, etc., but no dice.")
+    end
+    
+  end
+
+  # This class encapsulates the result of a geocoding call.
+  # It's primary purpose is to homogenize the results of multiple
+  # geocoding providers. It also provides some additional functionality, such as 
+  # the "full address" method for geocoders that do not provide a 
+  # full address in their results (for example, Yahoo), and the "is_us" method.
+  #
+  # Some geocoders can return multple results. Geoloc can capture multiple results through
+  # its "all" method. 
+  #
+  # For the geocoder setting the results, it would look something like this:
+  #     geo=GeoLoc.new(first_result)
+  #     geo.all.push(second_result)
+  #     geo.all.push(third_result)
+  #
+  # Then, for the user of the result:
+  #
+  #     puts geo.full_address     # just like usual
+  #     puts geo.all.size  => 3   # there's three results total
+  #     puts geo.all.first        # all is just an array or additional geolocs, 
+  #                                 so do what you want with it
+  class GeoLoc < LatLng
+
+    # Location attributes.  Full address is a concatenation of all values.  For example:
+    # 100 Spear St, San Francisco, CA, 94101, US
+    attr_accessor :street_address, :city, :state, :zip, :country_code, :full_address, :all
+    # Attributes set upon return from geocoding.  Success will be true for successful
+    # geocode lookups.  The provider will be set to the name of the providing geocoder.
+    # Finally, precision is an indicator of the accuracy of the geocoding.
+    attr_accessor :success, :provider, :precision
+    # Street number and street name are extracted from the street address attribute.
+    attr_reader :street_number, :street_name
+    # accuracy is set for Yahoo and Google geocoders, it is a numeric value of the 
+    # precision. see http://code.google.com/apis/maps/documentation/geocoding/#GeocodingAccuracy
+    attr_accessor :accuracy
+
+    # Constructor expects a hash of symbols to correspond with attributes.
+    def initialize(h={})
+      @all = [self]
+      
+      @street_address=h[:street_address] 
+      @city=h[:city] 
+      @state=h[:state] 
+      @zip=h[:zip] 
+      @country_code=h[:country_code] 
+      @success=false
+      @precision='unknown'
+      @full_address=nil
+      super(h[:lat],h[:lng])
+    end
+
+    # Returns true if geocoded to the United States.
+    def is_us?
+      country_code == 'US'
+    end
+    
+    def success?
+      success == true
+    end
+
+    # full_address is provided by google but not by yahoo. It is intended that the google
+    # geocoding method will provide the full address, whereas for yahoo it will be derived
+    # from the parts of the address we do have.
+    def full_address
+      @full_address ? @full_address : to_geocodeable_s
+    end
+
+    # Extracts the street number from the street address if the street address
+    # has a value.
+    def street_number
+      street_address[/(\d*)/] if street_address
+    end
+
+    # Returns the street name portion of the street address.
+    def street_name
+       street_address[street_number.length, street_address.length].strip if street_address
+    end
+
+    # gives you all the important fields as key-value pairs
+    def hash
+      res={}
+      [:success,:lat,:lng,:country_code,:city,:state,:zip,:street_address,:provider,:full_address,:is_us?,:ll,:precision].each { |s| res[s] = self.send(s.to_s) }
+      res
+    end
+    alias to_hash hash
+
+    # Sets the city after capitalizing each word within the city name.
+    def city=(city)
+      @city = Geokit::Inflector::titleize(city) if city
+    end
+
+    # Sets the street address after capitalizing each word within the street address.
+    def street_address=(address)
+      @street_address = Geokit::Inflector::titleize(address) if address
+    end  
+
+    # Returns a comma-delimited string consisting of the street address, city, state,
+    # zip, and country code.  Only includes those attributes that are non-blank.
+    def to_geocodeable_s
+      a=[street_address, city, state, zip, country_code].compact
+      a.delete_if { |e| !e || e == '' }
+      a.join(', ')      
+    end
+    
+    def to_yaml_properties
+      (instance_variables - ['@all']).sort
+    end
+
+    # Returns a string representation of the instance.
+    def to_s
+      "Provider: #{provider}\nStreet: #{street_address}\nCity: #{city}\nState: #{state}\nZip: #{zip}\nLatitude: #{lat}\nLongitude: #{lng}\nCountry: #{country_code}\nSuccess: #{success}"
+    end
+  end
+  
+  # Bounds represents a rectangular bounds, defined by the SW and NE corners
+  class Bounds
+    # sw and ne are LatLng objects
+    attr_accessor :sw, :ne
+    
+    # provide sw and ne to instantiate a new Bounds instance
+    def initialize(sw,ne)
+      raise ArgumentError if !(sw.is_a?(Geokit::LatLng) && ne.is_a?(Geokit::LatLng))
+      @sw,@ne=sw,ne
+    end
+    
+    #returns the a single point which is the center of the rectangular bounds
+    def center
+      @sw.midpoint_to(@ne)
+    end
+  
+    # a simple string representation:sw,ne
+    def to_s
+      "#{@sw.to_s},#{@ne.to_s}"   
+    end
+    
+    # a two-element array of two-element arrays: sw,ne
+    def to_a
+      [@sw.to_a, @ne.to_a]
+    end
+    
+    # Returns true if the bounds contain the passed point.
+    # allows for bounds which cross the meridian
+    def contains?(point)
+      point=Geokit::LatLng.normalize(point)
+      res = point.lat > @sw.lat && point.lat < @ne.lat
+      if crosses_meridian?
+        res &= point.lng < @ne.lng || point.lng > @sw.lng
+      else
+        res &= point.lng < @ne.lng && point.lng > @sw.lng
+      end
+      res
+    end
+    
+    # returns true if the bounds crosses the international dateline
+    def crosses_meridian?
+      @sw.lng > @ne.lng 
+    end
+
+    # Returns true if the candidate object is logically equal.  Logical equivalence
+    # is true if the lat and lng attributes are the same for both objects.
+    def ==(other)
+      other.is_a?(Bounds) ? self.sw == other.sw && self.ne == other.ne : false
+    end
+    
+    class <<self
+      
+      # returns an instance of bounds which completely encompases the given circle
+      def from_point_and_radius(point,radius,options={})
+        point=LatLng.normalize(point)
+        p0=point.endpoint(0,radius,options)
+        p90=point.endpoint(90,radius,options)
+        p180=point.endpoint(180,radius,options)
+        p270=point.endpoint(270,radius,options)
+        sw=Geokit::LatLng.new(p180.lat,p270.lng)
+        ne=Geokit::LatLng.new(p0.lat,p90.lng)
+        Geokit::Bounds.new(sw,ne)
+      end
+      
+      # Takes two main combinations of arguments to create a bounds:
+      # point,point   (this is the only one which takes two arguments
+      # [point,point]
+      # . . . where a point is anything LatLng#normalize can handle (which is quite a lot)
+      #
+      # NOTE: everything combination is assumed to pass points in the order sw, ne
+      def normalize (thing,other=nil)   
+        # maybe this will be simple -- an actual bounds object is passed, and we can all go home
+        return thing if thing.is_a? Bounds
+        
+        # no? OK, if there's no "other," the thing better be a two-element array        
+        thing,other=thing if !other && thing.is_a?(Array) && thing.size==2
+
+        # Now that we're set with a thing and another thing, let LatLng do the heavy lifting.
+        # Exceptions may be thrown
+        Bounds.new(Geokit::LatLng.normalize(thing),Geokit::LatLng.normalize(other))
+      end
+    end
+  end
+end