wxcli 1.4.0__tar.gz → 1.4.2__tar.gz

{wxcli-1.4.0 → wxcli-1.4.2}/.claude/agents/wxc-calling-builder.md

@@ -692,12 +692,6 @@ These are non-negotiable. Violating any of these causes failures, data loss, or
 ### Verify Auth Before Executing
 ALWAYS validate the access token before running any commands. A stale token causes cryptic 401 errors mid-execution. Run `wxcli whoami` as a smoke test before starting.
 
-### Present Plan Before Executing
-ALWAYS show the complete deployment plan and get explicit user approval before making any API calls. Never execute without sign-off. The user must see every API call that will be made, with actual parameter values.
-
-### Never Execute Without Approval
-If the user says "just do it" without seeing the plan, show the plan first anyway. This is not optional. The one exception is single read-only operations (GET requests) used for discovery during the interview phase.
-
 ### Handle Rate Limiting
 Webex APIs enforce rate limits. wxcli does NOT auto-retry 429s in normal CLI mode — it raises an error. For shell loops, add `sleep 1` between commands to avoid hitting limits. For bulk async operations, use the semaphore + 429 retry pattern (see Bulk Operations section).
 

{wxcli-1.4.0/src/wxcli/_playbook/.codex → wxcli-1.4.2/.claude}/skills/configure-features/SKILL.md

@@ -217,7 +217,7 @@ wxcli auto-attendant create LOCATION_ID \
   --business-schedule "Business Hours"
 ```
 
-Optional flags: `--phone-number`, `--holiday-schedule`, `--disabled`.
+Optional flags: `--phone-number`, `--holiday-schedule`, `--extension-dialing`, `--name-dialing`, `--first-name`, `--last-name`, `--language-code`, `--time-zone`.
 
 ---
 
@@ -376,7 +376,7 @@ wxcli paging-group create LOCATION_ID \
   --extension 8100
 ```
 
-Optional flags: `--disabled`.
+Optional flags: `--phone-number`, `--first-name`, `--last-name`, `--language-code`, `--originator-caller-id-enabled`.
 
 To list existing paging groups:
 

{wxcli-1.4.0/src/wxcli/_playbook → wxcli-1.4.2}/.claude/skills/cucm-migrate/SKILL.md

@@ -463,7 +463,7 @@ This table is the PRIMARY execution mechanism. The pipeline says WHAT. The domai
 |--------------|---------|-------------|------------------------------|
 | location | create | provision-calling | Two-step: `locations create` + `location-settings create` to enable calling |
 | location | enable_calling | provision-calling | Separate API call to enable Webex Calling on the location |
-| user | create | provision-calling | Extension required at creation. License via `--license`. Combines create + assign_number + assign_license |
+| user | create | provision-calling | Extension required at creation. `people create` has no license flag — licenses are assigned separately via the `licenses` group. Combines create + assign_number + assign_license |
 | user | configure_settings | manage-call-settings | Read-before-write. `--json-body` format. Per-setting endpoint paths |
 | user | configure_voicemail | manage-call-settings | Same as configure_settings |
 | workspace | create | provision-calling | License tier matters. Basic vs Professional determines which settings work |

{wxcli-1.4.0/src/wxcli/_playbook → wxcli-1.4.2}/.claude/skills/manage-licensing/SKILL.md

@@ -504,7 +504,7 @@ Next steps:
 
 10. **206 Partial Content is not an error** -- The PATCH endpoint can return HTTP 206 when some licenses succeeded but others failed. Always compare the returned `licenses` array against what was requested.
 
-11. **`licenses` (admin spec) vs `licenses` (calling spec)** -- Use `licenses` for assignment/removal and full inventory. Use `licenses` with `--calling-only` for quick calling-license audits.
+11. **`licenses-api` is a deprecated alias for `licenses`** -- Both names resolve to the same module with the same commands (`list`, `show`, `update`). Prefer `licenses`; `licenses-api` will be removed.
 
 12. **Log all operations** -- Print what you are about to do before each CLI command, and print the result after. This creates an audit trail for troubleshooting.
 
@@ -555,17 +555,6 @@ Licensing-specific errors:
 
 ---
 
-## Two CLI Groups for Licensing
-
-| | `licenses` (admin spec) | `licenses` (calling spec) |
-|---|---|---|
-| **Commands** | list, show, update | list, show |
-| **Best for** | Full lifecycle: inventory, details with assigned users, assign, remove | Quick calling-license audit |
-| **Assignment** | Yes -- via `update` with `--json-body` | No -- read-only |
-| **Filter** | No built-in filter (use JSON output + script) | `--calling-only` flag |
-
----
-
 ## License Type Quick Reference
 
 | License Name Pattern | Type | Properties Required |

{wxcli-1.4.0 → wxcli-1.4.2}/.github/workflows/ci.yml

@@ -33,8 +33,32 @@ jobs:
           # to stub aiohttp. It is declared nowhere else, so a dev with it
           # installed sees green locally while CI cannot even collect them.
           pip install pytest pytest-asyncio aioresponses
+          # aiohttp is pinned HERE and not in pyproject on purpose: nothing is
+          # wrong with the CLI on aiohttp 3.14 — the break is in the test double.
+          # aioresponses 0.7.9 builds a ClientResponse by hand and does not pass
+          # `stream_writer`, which aiohttp 3.14 made a required kwarg, so every
+          # test that stubs aiohttp dies with TypeError at request time. Its own
+          # metadata claims `aiohttp<4.0,>=3.8`, so pip will not resolve away
+          # from it and the pin has to be ours. Pinning the runtime dep in
+          # pyproject instead would constrain USERS for a test-only defect.
+          # Drop this the moment aioresponses supports 3.14 (28 tests, all in
+          # tests/migration/execute/, will tell you immediately).
+          pip install 'aiohttp<3.14'
 
       - name: Run tests (excluding live API tests)
+        # TERM=dumb, not NO_COLOR=1. rich special-cases GitHub Actions as a
+        # colour-capable terminal, so `--help` output comes back wrapped in ANSI
+        # and `assert "--host" in result.output` fails on text that renders
+        # correctly. NO_COLOR is the wrong knob and was measured failing: it
+        # suppresses colour but NOT bold/dim, so rich still emits `\x1b[1m`
+        # between the dashes and still splits the flag. TERM=dumb makes
+        # rich's is_terminal false, which is what actually yields plain text.
+        # COLUMNS is set for the same reason the repo drives every real
+        # `--help` as `COLUMNS=400 TERM=dumb`: at 80 cols rich wraps a long flag
+        # declaration onto a second line and a substring assertion misses it.
+        env:
+          TERM: dumb
+          COLUMNS: "400"
         run: |
           pytest tests/ -m "not live" -v --tb=short
 

{wxcli-1.4.0 → wxcli-1.4.2}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: wxcli
-Version: 1.4.0
+Version: 1.4.2
 Summary: Webex Calling CLI — terminal-based provisioning for Webex APIs
 Author: Adam Hobgood
 License: Apache-2.0

{wxcli-1.4.0/src/wxcli/_playbook → wxcli-1.4.2}/docs/reference/contact-center-routing.md

@@ -373,9 +373,13 @@ channel. Useful for IVR flows that announce hold times to callers. 1 command.
 
 ### Key Parameters
 
-- `--queue-id` -- Queue ID to check
-- `--media-type` -- Media type (e.g., `telephony`, `chat`, `email`)
-- `--lookup-type` -- Type of EWT lookup
+- `--queue-id` -- Queue ID to check (required)
+- `--lookback-minutes` -- Sampling window, 5-240 (required)
+- `--max-cv` -- Maximum coefficient of variance within a subset of samples (wait times for tasks
+  connected to an agent in a one-minute interval), used to determine whether the average of those
+  values is treated as a valid sample for EWT computation. 1-100, defaults to 40%
+- `--min-valid-samples` -- Minimum percentage of valid samples, with respect to the total number of
+  samples, within the specified lookback window. 1-100, defaults to 40%
 
 ### CLI Examples
 

{wxcli-1.4.0/src/wxcli/_playbook → wxcli-1.4.2}/docs/reference/meetings-core.md

@@ -459,7 +459,9 @@ Registration forms and registrant management for webinar-type meetings. These en
 | `--require-company-name` | Require company name |
 | `--require-job-title` | Require job title |
 | `--require-work-phone` | Require work phone number |
-| `--require-address-1` | Require address line 1 |
+| `--require-fax` | Require fax number |
+| `--require-address1` | Require address line 1 |
+| `--require-address2` | Require address line 2 |
 | `--require-city` | Require city |
 | `--require-state` | Require state/province |
 | `--require-zip-code` | Require postal code |

{wxcli-1.4.0/src/wxcli/_playbook → wxcli-1.4.2}/docs/reference/messaging-spaces.md

@@ -258,7 +258,7 @@ messages = result.get("items", [])
 ### Gotchas
 
 - **`--room-id` is required for `list`** — there is no global messages endpoint. You must specify a room.
-- **`--files` accepts a URL, not a local file path.** The URL must be publicly accessible or a Webex content URL. For local file uploads, use `--json-body` with a multipart approach or upload first via another mechanism.
+- **There is no `--files` flag** — the API's `files` field is an array, so it is not rendered as a flag (known issue #2). Attach via `--json-body '{"roomId":"...","text":"...","files":["https://example.com/a.png"]}'`. The entry must be a **publicly accessible URL, not a local file path**, and the API accepts only one file per message. For a local file, upload it somewhere reachable first.
 - **Bots can only read messages where they are @mentioned**, except in 1:1 direct spaces where they see all messages.
 - **Edit only works on messages sent by the authenticated user or bot.** Editing someone else's message will return 403.
 - **`--before` and `--before-message` are pagination tools** — use `--before-message` with the ID of the oldest message in the last page to walk backward through history.

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/_playbook/.claude/agents/wxc-calling-builder.md

@@ -692,12 +692,6 @@ These are non-negotiable. Violating any of these causes failures, data loss, or
 ### Verify Auth Before Executing
 ALWAYS validate the access token before running any commands. A stale token causes cryptic 401 errors mid-execution. Run `wxcli whoami` as a smoke test before starting.
 
-### Present Plan Before Executing
-ALWAYS show the complete deployment plan and get explicit user approval before making any API calls. Never execute without sign-off. The user must see every API call that will be made, with actual parameter values.
-
-### Never Execute Without Approval
-If the user says "just do it" without seeing the plan, show the plan first anyway. This is not optional. The one exception is single read-only operations (GET requests) used for discovery during the interview phase.
-
 ### Handle Rate Limiting
 Webex APIs enforce rate limits. wxcli does NOT auto-retry 429s in normal CLI mode — it raises an error. For shell loops, add `sleep 1` between commands to avoid hitting limits. For bulk async operations, use the semaphore + 429 retry pattern (see Bulk Operations section).
 

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/_playbook/.claude/skills/configure-features/SKILL.md

@@ -217,7 +217,7 @@ wxcli auto-attendant create LOCATION_ID \
   --business-schedule "Business Hours"
 ```
 
-Optional flags: `--phone-number`, `--holiday-schedule`, `--disabled`.
+Optional flags: `--phone-number`, `--holiday-schedule`, `--extension-dialing`, `--name-dialing`, `--first-name`, `--last-name`, `--language-code`, `--time-zone`.
 
 ---
 
@@ -376,7 +376,7 @@ wxcli paging-group create LOCATION_ID \
   --extension 8100
 ```
 
-Optional flags: `--disabled`.
+Optional flags: `--phone-number`, `--first-name`, `--last-name`, `--language-code`, `--originator-caller-id-enabled`.
 
 To list existing paging groups:
 

{wxcli-1.4.0/src/wxcli/_playbook/.codex → wxcli-1.4.2/src/wxcli/_playbook/.claude}/skills/cucm-migrate/SKILL.md

@@ -463,7 +463,7 @@ This table is the PRIMARY execution mechanism. The pipeline says WHAT. The domai
 |--------------|---------|-------------|------------------------------|
 | location | create | provision-calling | Two-step: `locations create` + `location-settings create` to enable calling |
 | location | enable_calling | provision-calling | Separate API call to enable Webex Calling on the location |
-| user | create | provision-calling | Extension required at creation. License via `--license`. Combines create + assign_number + assign_license |
+| user | create | provision-calling | Extension required at creation. `people create` has no license flag — licenses are assigned separately via the `licenses` group. Combines create + assign_number + assign_license |
 | user | configure_settings | manage-call-settings | Read-before-write. `--json-body` format. Per-setting endpoint paths |
 | user | configure_voicemail | manage-call-settings | Same as configure_settings |
 | workspace | create | provision-calling | License tier matters. Basic vs Professional determines which settings work |

{wxcli-1.4.0 → wxcli-1.4.2/src/wxcli/_playbook}/.claude/skills/manage-licensing/SKILL.md

@@ -504,7 +504,7 @@ Next steps:
 
 10. **206 Partial Content is not an error** -- The PATCH endpoint can return HTTP 206 when some licenses succeeded but others failed. Always compare the returned `licenses` array against what was requested.
 
-11. **`licenses` (admin spec) vs `licenses` (calling spec)** -- Use `licenses` for assignment/removal and full inventory. Use `licenses` with `--calling-only` for quick calling-license audits.
+11. **`licenses-api` is a deprecated alias for `licenses`** -- Both names resolve to the same module with the same commands (`list`, `show`, `update`). Prefer `licenses`; `licenses-api` will be removed.
 
 12. **Log all operations** -- Print what you are about to do before each CLI command, and print the result after. This creates an audit trail for troubleshooting.
 
@@ -555,17 +555,6 @@ Licensing-specific errors:
 
 ---
 
-## Two CLI Groups for Licensing
-
-| | `licenses` (admin spec) | `licenses` (calling spec) |
-|---|---|---|
-| **Commands** | list, show, update | list, show |
-| **Best for** | Full lifecycle: inventory, details with assigned users, assign, remove | Quick calling-license audit |
-| **Assignment** | Yes -- via `update` with `--json-body` | No -- read-only |
-| **Filter** | No built-in filter (use JSON output + script) | `--calling-only` flag |
-
----
-
 ## License Type Quick Reference
 
 | License Name Pattern | Type | Properties Required |

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/_playbook/.codex/agents/wxc-calling-builder.toml

@@ -687,12 +687,6 @@ These are non-negotiable. Violating any of these causes failures, data loss, or
 ### Verify Auth Before Executing
 ALWAYS validate the access token before running any commands. A stale token causes cryptic 401 errors mid-execution. Run `wxcli whoami` as a smoke test before starting.
 
-### Present Plan Before Executing
-ALWAYS show the complete deployment plan and get explicit user approval before making any API calls. Never execute without sign-off. The user must see every API call that will be made, with actual parameter values.
-
-### Never Execute Without Approval
-If the user says "just do it" without seeing the plan, show the plan first anyway. This is not optional. The one exception is single read-only operations (GET requests) used for discovery during the interview phase.
-
 ### Handle Rate Limiting
 Webex APIs enforce rate limits. wxcli does NOT auto-retry 429s in normal CLI mode — it raises an error. For shell loops, add `sleep 1` between commands to avoid hitting limits. For bulk async operations, use the semaphore + 429 retry pattern (see Bulk Operations section).
 

{wxcli-1.4.0/.claude → wxcli-1.4.2/src/wxcli/_playbook/.codex}/skills/configure-features/SKILL.md

@@ -217,7 +217,7 @@ wxcli auto-attendant create LOCATION_ID \
   --business-schedule "Business Hours"
 ```
 
-Optional flags: `--phone-number`, `--holiday-schedule`, `--disabled`.
+Optional flags: `--phone-number`, `--holiday-schedule`, `--extension-dialing`, `--name-dialing`, `--first-name`, `--last-name`, `--language-code`, `--time-zone`.
 
 ---
 
@@ -376,7 +376,7 @@ wxcli paging-group create LOCATION_ID \
   --extension 8100
 ```
 
-Optional flags: `--disabled`.
+Optional flags: `--phone-number`, `--first-name`, `--last-name`, `--language-code`, `--originator-caller-id-enabled`.
 
 To list existing paging groups:
 

{wxcli-1.4.0/.claude → wxcli-1.4.2/src/wxcli/_playbook/.codex}/skills/cucm-migrate/SKILL.md

@@ -463,7 +463,7 @@ This table is the PRIMARY execution mechanism. The pipeline says WHAT. The domai
 |--------------|---------|-------------|------------------------------|
 | location | create | provision-calling | Two-step: `locations create` + `location-settings create` to enable calling |
 | location | enable_calling | provision-calling | Separate API call to enable Webex Calling on the location |
-| user | create | provision-calling | Extension required at creation. License via `--license`. Combines create + assign_number + assign_license |
+| user | create | provision-calling | Extension required at creation. `people create` has no license flag — licenses are assigned separately via the `licenses` group. Combines create + assign_number + assign_license |
 | user | configure_settings | manage-call-settings | Read-before-write. `--json-body` format. Per-setting endpoint paths |
 | user | configure_voicemail | manage-call-settings | Same as configure_settings |
 | workspace | create | provision-calling | License tier matters. Basic vs Professional determines which settings work |

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/_playbook/.codex/skills/manage-licensing/SKILL.md

@@ -504,7 +504,7 @@ Next steps:
 
 10. **206 Partial Content is not an error** -- The PATCH endpoint can return HTTP 206 when some licenses succeeded but others failed. Always compare the returned `licenses` array against what was requested.
 
-11. **`licenses` (admin spec) vs `licenses` (calling spec)** -- Use `licenses` for assignment/removal and full inventory. Use `licenses` with `--calling-only` for quick calling-license audits.
+11. **`licenses-api` is a deprecated alias for `licenses`** -- Both names resolve to the same module with the same commands (`list`, `show`, `update`). Prefer `licenses`; `licenses-api` will be removed.
 
 12. **Log all operations** -- Print what you are about to do before each CLI command, and print the result after. This creates an audit trail for troubleshooting.
 
@@ -555,17 +555,6 @@ Licensing-specific errors:
 
 ---
 
-## Two CLI Groups for Licensing
-
-| | `licenses` (admin spec) | `licenses` (calling spec) |
-|---|---|---|
-| **Commands** | list, show, update | list, show |
-| **Best for** | Full lifecycle: inventory, details with assigned users, assign, remove | Quick calling-license audit |
-| **Assignment** | Yes -- via `update` with `--json-body` | No -- read-only |
-| **Filter** | No built-in filter (use JSON output + script) | `--calling-only` flag |
-
----
-
 ## License Type Quick Reference
 
 | License Name Pattern | Type | Properties Required |

{wxcli-1.4.0 → wxcli-1.4.2/src/wxcli/_playbook}/docs/reference/contact-center-routing.md

@@ -373,9 +373,13 @@ channel. Useful for IVR flows that announce hold times to callers. 1 command.
 
 ### Key Parameters
 
-- `--queue-id` -- Queue ID to check
-- `--media-type` -- Media type (e.g., `telephony`, `chat`, `email`)
-- `--lookup-type` -- Type of EWT lookup
+- `--queue-id` -- Queue ID to check (required)
+- `--lookback-minutes` -- Sampling window, 5-240 (required)
+- `--max-cv` -- Maximum coefficient of variance within a subset of samples (wait times for tasks
+  connected to an agent in a one-minute interval), used to determine whether the average of those
+  values is treated as a valid sample for EWT computation. 1-100, defaults to 40%
+- `--min-valid-samples` -- Minimum percentage of valid samples, with respect to the total number of
+  samples, within the specified lookback window. 1-100, defaults to 40%
 
 ### CLI Examples
 

{wxcli-1.4.0 → wxcli-1.4.2/src/wxcli/_playbook}/docs/reference/meetings-core.md

@@ -459,7 +459,9 @@ Registration forms and registrant management for webinar-type meetings. These en
 | `--require-company-name` | Require company name |
 | `--require-job-title` | Require job title |
 | `--require-work-phone` | Require work phone number |
-| `--require-address-1` | Require address line 1 |
+| `--require-fax` | Require fax number |
+| `--require-address1` | Require address line 1 |
+| `--require-address2` | Require address line 2 |
 | `--require-city` | Require city |
 | `--require-state` | Require state/province |
 | `--require-zip-code` | Require postal code |

{wxcli-1.4.0 → wxcli-1.4.2/src/wxcli/_playbook}/docs/reference/messaging-spaces.md

@@ -258,7 +258,7 @@ messages = result.get("items", [])
 ### Gotchas
 
 - **`--room-id` is required for `list`** — there is no global messages endpoint. You must specify a room.
-- **`--files` accepts a URL, not a local file path.** The URL must be publicly accessible or a Webex content URL. For local file uploads, use `--json-body` with a multipart approach or upload first via another mechanism.
+- **There is no `--files` flag** — the API's `files` field is an array, so it is not rendered as a flag (known issue #2). Attach via `--json-body '{"roomId":"...","text":"...","files":["https://example.com/a.png"]}'`. The entry must be a **publicly accessible URL, not a local file path**, and the API accepts only one file per message. For a local file, upload it somewhere reachable first.
 - **Bots can only read messages where they are @mentioned**, except in 1:1 direct spaces where they see all messages.
 - **Edit only works on messages sent by the authenticated user or bot.** Editing someone else's message will return 403.
 - **`--before` and `--before-message` are pagination tools** — use `--before-message` with the ID of the oldest message in the last page to walk backward through history.

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/_version.py

@@ -18,7 +18,7 @@ version_tuple: tuple[int | str, ...]
 commit_id: str | None
 __commit_id__: str | None
 
-__version__ = version = '1.4.0'
-__version_tuple__ = version_tuple = (1, 4, 0)
+__version__ = version = '1.4.2'
+__version_tuple__ = version_tuple = (1, 4, 2)
 
-__commit_id__ = commit_id = 'g668a7a249'
+__commit_id__ = commit_id = 'g9318ddb89'

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/auth.py

@@ -79,8 +79,14 @@ class WebexSession:
         return self._json_or_raise(self._request("PATCH", url, json=json, params=params,
                                                  content_type=content_type))
 
-    def rest_delete(self, url: str, params=None) -> dict:
-        return self._json_or_raise(self._request("DELETE", url, params=params))
+    def rest_delete(self, url: str, json=None, params=None) -> dict:
+        # DELETE carries a body on 10 Webex operations: the body is what SCOPES
+        # the delete (`supervisorIds`, `phoneNumbers`, `backgroundImages`...).
+        # Without it the API rejects the call outright — verified live against
+        # /telephony/config/supervisors: 400, errorCode 25024, "Required request
+        # body is missing". It does NOT delete everything; those endpoints gate
+        # delete-all behind an explicit `deleteAll: true`.
+        return self._json_or_raise(self._request("DELETE", url, json=json, params=params))
 
     def follow_pagination(self, url: str, params=None, item_key: str = "items"):
         while url:

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/admin_recordings.py

@@ -301,6 +301,9 @@ def show(
 def delete_recordings(
     recording_id: str = typer.Argument(help="recordingId"),
     host_email: str = typer.Option(None, "--host-email", help="Email address for the meeting host. Only used if the user or"),
+    reason: str = typer.Option(None, "--reason", help="Reason for deleting a recording. Only required when a Compli"),
+    comment: str = typer.Option(None, "--comment", help="Compliance Officer's explanation for deleting a recording. T"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -312,8 +315,16 @@ def delete_recordings(
     params = {}
     if host_email is not None:
         params["hostEmail"] = host_email
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+        if reason is not None:
+            body["reason"] = reason
+        if comment is not None:
+            body["comment"] = comment
     try:
-        api.session.rest_delete(url, params=params)
+        api.session.rest_delete(url, json=body or None, params=params)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo(f"Deleted: {recording_id}")

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/call_queue.py

@@ -1159,6 +1159,9 @@ def create_supervisors(
 
 @app.command("delete-supervisors-config")
 def delete_supervisors_config(
+    has_cx_essentials: bool = typer.Option(None, "--has-cx-essentials/--no-has-cx-essentials", help="Delete the Customer Assist supervisors, when `true`. Otherwi"),
+    delete_all: bool = typer.Option(None, "--delete-all/--no-delete-all", help="If present the `supervisorIds` array is ignored, and all sup"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -1171,8 +1174,20 @@ def delete_supervisors_config(
     org_id = get_org_id()
     if org_id is not None:
         params["orgId"] = org_id
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+        if has_cx_essentials is not None:
+            body["hasCxEssentials"] = has_cx_essentials
+        if delete_all is not None:
+            body["deleteAll"] = delete_all
+    missing = [f for f in ['supervisorIds'] if f not in body]
+    if missing:
+        typer.echo(f"Error: required body field(s) missing: {', '.join(missing)}. Pass them via --json-body — this delete needs to know what to delete.", err=True)
+        raise typer.Exit(1)
     try:
-        api.session.rest_delete(url, params=params)
+        api.session.rest_delete(url, json=body or None, params=params)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo("Deleted.")
@@ -1600,6 +1615,7 @@ def create_dnis(
 def delete_dnis_queues(
     location_id: str = typer.Argument(help="locationId"),
     queue_id: str = typer.Argument(help="queueId"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -1612,8 +1628,16 @@ def delete_dnis_queues(
     org_id = get_org_id()
     if org_id is not None:
         params["orgId"] = org_id
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+    missing = [f for f in ['items'] if f not in body]
+    if missing:
+        typer.echo(f"Error: required body field(s) missing: {', '.join(missing)}. Pass them via --json-body — this delete needs to know what to delete.", err=True)
+        raise typer.Exit(1)
     try:
-        api.session.rest_delete(url, params=params)
+        api.session.rest_delete(url, json=body or None, params=params)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo(f"Deleted: {queue_id}")

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/cc_flow.py

@@ -18,7 +18,7 @@ def cmd_list(
     partial_name_search: str = typer.Option(None, "--partial-name-search", help="Performs a partial string match on the name of the flow. If"),
     search_by: str = typer.Option(None, "--search-by", help="Filter expression in the format `<field>|<value>`. Supports"),
     size: str = typer.Option(None, "--size", help="Defines the number of items to be displayed on a page. If th"),
-    include_pagination: str = typer.Option(None, "--include-pagination", help="If set to to true then a different paginated response object"),
+    include_pagination: str = typer.Option(None, "--include-pagination", help="If set to true then a different paginated response object co"),
     is_validation: str = typer.Option(None, "--is-validation", help="If true, validates the existence of flows by ID regardless o"),
     output: str = typer.Option("table", "--output", "-o", help="Output format: table|json"),
     limit: int = typer.Option(0, "--limit", help="Max results (0=all for paginated endpoints, API default for non-paginated)"),
@@ -429,7 +429,7 @@ def list_validate(
     except WebexError as e:
         handle_rest_error(e)
     result = result or []
-    items = result.get("errors", result.get("data", result if isinstance(result, list) else [])) if isinstance(result, dict) else (result if isinstance(result, list) else [])
+    items = result.get("results", result.get("data", result if isinstance(result, list) else [])) if isinstance(result, dict) else (result if isinstance(result, list) else [])
     if output == "json":
         print_json(items)
     else:

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/converged_recordings.py

@@ -158,6 +158,9 @@ def show(
 @app.command("delete")
 def delete(
     recording_id: str = typer.Argument(help="recordingId"),
+    reason: str = typer.Option(None, "--reason", help="Reason for deleting a recording. Only required when a Compli"),
+    comment: str = typer.Option(None, "--comment", help="Compliance Officer's explanation for deleting a recording. T"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -166,8 +169,16 @@ def delete(
         typer.confirm(f"Delete {recording_id}?", abort=True)
     api = get_api(debug=debug)
     url = f"https://webexapis.com/v1/convergedRecordings/{recording_id}"
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+        if reason is not None:
+            body["reason"] = reason
+        if comment is not None:
+            body["comment"] = comment
     try:
-        api.session.rest_delete(url)
+        api.session.rest_delete(url, json=body or None)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo(f"Deleted: {recording_id}")

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/dect_devices.py

@@ -526,6 +526,8 @@ def delete_handsets_dect_networks(
 def delete_handsets_dect_networks_1(
     location_id: str = typer.Argument(help="locationId"),
     dect_network_id: str = typer.Argument(help="dectNetworkId"),
+    delete_all: bool = typer.Option(None, "--delete-all/--no-delete-all", help="If present the items array is ignored and all items in the c"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -538,8 +540,18 @@ def delete_handsets_dect_networks_1(
     org_id = get_org_id()
     if org_id is not None:
         params["orgId"] = org_id
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+        if delete_all is not None:
+            body["deleteAll"] = delete_all
+    missing = [f for f in ['handsetIds'] if f not in body]
+    if missing:
+        typer.echo(f"Error: required body field(s) missing: {', '.join(missing)}. Pass them via --json-body — this delete needs to know what to delete.", err=True)
+        raise typer.Exit(1)
     try:
-        api.session.rest_delete(url, params=params)
+        api.session.rest_delete(url, json=body or None, params=params)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo(f"Deleted: {dect_network_id}")

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/device_settings.py

@@ -1439,6 +1439,7 @@ def list_background_images(
 
 @app.command("delete-background-images")
 def delete_background_images(
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -1451,8 +1452,16 @@ def delete_background_images(
     org_id = get_org_id()
     if org_id is not None:
         params["orgId"] = org_id
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+    missing = [f for f in ['backgroundImages'] if f not in body]
+    if missing:
+        typer.echo(f"Error: required body field(s) missing: {', '.join(missing)}. Pass them via --json-body — this delete needs to know what to delete.", err=True)
+        raise typer.Exit(1)
     try:
-        api.session.rest_delete(url, params=params)
+        api.session.rest_delete(url, json=body or None, params=params)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo("Deleted.")

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/meeting_transcripts.py

@@ -213,6 +213,9 @@ def update(
 @app.command("delete")
 def delete(
     transcript_id: str = typer.Argument(help="transcriptId"),
+    reason: str = typer.Option(None, "--reason", help="Reason for deleting a transcript. Only required when a Compl"),
+    comment: str = typer.Option(None, "--comment", help="Explanation for deleting a transcript. The comment can be a"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -221,8 +224,16 @@ def delete(
         typer.confirm(f"Delete {transcript_id}?", abort=True)
     api = get_api(debug=debug)
     url = f"https://webexapis.com/v1/meetingTranscripts/{transcript_id}"
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+        if reason is not None:
+            body["reason"] = reason
+        if comment is not None:
+            body["comment"] = comment
     try:
-        api.session.rest_delete(url)
+        api.session.rest_delete(url, json=body or None)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo(f"Deleted: {transcript_id}")

{wxcli-1.4.0 → wxcli-1.4.2}/src/wxcli/commands/numbers.py

@@ -88,6 +88,7 @@ def update(
 @app.command("delete")
 def delete(
     location_id: str = typer.Argument(help="locationId"),
+    json_body: str = typer.Option(None, "--json-body", help="Full JSON body (overrides other options)"),
     force: bool = typer.Option(False, "--force", help="Skip confirmation"),
     debug: bool = typer.Option(False, "--debug"),
 ):
@@ -100,8 +101,16 @@ def delete(
     org_id = get_org_id()
     if org_id is not None:
         params["orgId"] = org_id
+    if json_body:
+        body = json.loads(json_body)
+    else:
+        body = {}
+    missing = [f for f in ['phoneNumbers'] if f not in body]
+    if missing:
+        typer.echo(f"Error: required body field(s) missing: {', '.join(missing)}. Pass them via --json-body — this delete needs to know what to delete.", err=True)
+        raise typer.Exit(1)
     try:
-        api.session.rest_delete(url, params=params)
+        api.session.rest_delete(url, json=body or None, params=params)
     except WebexError as e:
         handle_rest_error(e)
     typer.echo(f"Deleted: {location_id}")