tidy3d 2.12.0.dev0__tar.gz → 2.12.0.dev1__tar.gz

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/CHANGELOG.md

@@ -9,6 +9,31 @@ and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0
 
 <!-- towncrier release notes start -->
 
+## [2.12.0.dev1] - 2026-06-04
+
+### Added
+
+- `TFSF` source now exposes an `angular_spec` field (`FixedInPlaneKSpec` or `FixedAngleSpec`) mirroring `PlaneWave`, enabling fixed-angle (frequency-independent propagation direction) TFSF setups for isolated scatterers. Fixed-angle TFSF rejects `Periodic` and `BlochBoundary` transverse boundaries and is intended to be used with absorbing (`PML`/`Absorber`/`StablePML`) transverse boundaries; 2D simulations may keep the conventional `Periodic` on the zero-width out-of-plane axis as long as the wave's k-vector has no component along it.
+- Added ``PointCloudFieldMonitor`` and ``PointCloudFieldData`` for frequency-domain E/H field sampling at custom point-cloud coordinates. ``PointCloudFieldData`` is indexed by point, so structured-grid field plotting helpers such as ``SimulationData.plot_field()`` do not support it.
+- Added `SteadyChargeResidualMonitor`, a debug-grade Charge-simulation monitor that records the per-node signed residual of each governing equation (`residual_potential` for the Poisson equation, `residual_electrons` for the electron continuity equation, `residual_holes` for the hole continuity equation, plus `residual_temperature` for the heat equation when the thermal solver is active). The values are dimensionless and on the same scale as the simulation's convergence tolerance, so the nodes with the largest magnitude are where the solution least satisfies the equations, helping locate the least-converged regions. Available only through the accelerated solver.
+- Added the dipole emission study plugin, including `DipoleEmissionMonitor`, core `DipoleEmissionData` monitor outputs, plugin `DipoleEmissionStudyData` results, `SphericalAngleDataArray`, compact stored `radiation_intensity` outputs, study-level derived `radiation_intensity_transfer` properties, optional position- and axis-dependent integration weights, and optional selected-position radiation-intensity samples.
+
+### Changed
+
+- `TFSF` now rejects `Periodic` and `BlochBoundary` along its injection axis at simulation construction time. The wave reaching such a boundary would be re-injected into the scattered-field region, breaking the TFSF formulation; previously this misconfiguration was accepted and produced silently incorrect results.
+- EME overlap and flux calculations now use the Yee-staggered integration convention used by mode normalization. This improves modal orthogonality and interface S-matrix reciprocity. EME scattering matrices may differ slightly from earlier versions, with the difference decreasing at higher grid resolution. `EMESimulationData.smatrix_in_basis`, the local-solver `EMESimulation.smatrix_in_basis`, and `EMESimulationData.field_in_basis` re-express the scattering matrix (or field) in this same Yee convention by default (matching how it was computed), switching to colocated integration when a target basis stores its fields colocated (`colocate=True`) or sits on a different grid than the port modes, where native-Yee integration is impossible; if such a target cannot provide colocated integration (e.g. a `colocate=False` `EMEModeSolverMonitor`), the call raises rather than silently mixing conventions. Note that `EMEModeSolverMonitor` — the usual way to provide a target basis — and field monitors default to `colocate=True`, so monitor-based rebasing uses the colocated path unless `colocate=False` is set on the target monitor. A target basis's own `use_colocated_integration` is not honored — the rebasing convention is otherwise fixed by the (Yee) port modes.
+- Improved runtime and memory usage for local single-precision mode solver runs with lossless materials and `num_pml=(0, 0)`.
+
+### Fixed
+
+- `TFSF` injection in a lossy source-side medium now normalises the user-specified unit amplitude at the injection plane (the TFSF box face) for both the legacy constant-in-plane-k path and the new fixed-angle path; previously the legacy aux PlaneWave's unit reference sat two cells outside the box, so the wave reaching the box face was decayed by `exp(-Im(kz)·2·dz)` in lossy media.
+- `EMESimulationData.smatrix_in_basis`, `EMESimulation.smatrix_in_basis`, and `EMESimulationData.field_in_basis` now correctly handle modal bases that are not orthonormal in their overlap inner product — non-orthogonal combinations of port modes, modes on a different grid, or a custom field such as a Gaussian beam — and are exact for the same-modes round-trip. As a result, existing calls generally return a (corrected) different result; pass `skip_gram_normalization=True` to skip the normalization and recover the previous behavior, which is exact only when the bases are already orthonormal in this overlap convention. Incomplete mode or field data now raises `SetupError` rather than returning an incorrect S-matrix or field. `EMESimulationData.field_in_basis` rebases through the same trial-basis port modes as `smatrix_in_basis` (those kept on the S-matrix diagonal), so increasing-/`ModeSortSpec`-filtered and sweep-truncated modes are dropped consistently instead of leaking into the rebased field or being mis-rejected as incomplete data.
+- Endpoint extrapolation in `AxisAlignedPathIntegral` and `AxisAlignedVoltageIntegral` (`extrapolate_to_endpoints=True`) no longer silently returns the un-extrapolated value with xarray >= 2025.11.
+- Fixed EME coefficient normalization to use absolute real mode flux, leave zero-flux modes unscaled, and renormalize all four interface S-matrix blocks using flux data for both cells adjacent to each interface.
+- Fixed a divergence issue in WavePort simulations where port edges are exactly aligned to the simulation grid.
+- Fixed the dipole emission plugin's `radiation_intensity_transfer` normalization and angle-coordinate handling after HDF5 round trips.
+- Updated CHARGE documentation to reflect the accelerated solver, including convergence and tolerance guidance.
+
 ## [2.12.0.dev0] - 2026-05-29
 
 ### Added
@@ -2178,6 +2203,7 @@ which fields are to be projected is now determined automatically based on the me
 - Job and Batch classes for better simulation handling (eventually to fully replace webapi functions).
 - A large number of small improvements and bug fixes.
 
+[2.12.0.dev1]: https://github.com/flexcompute/tidy3d/compare/v2.12.0.dev0...v2.12.0.dev1
 [2.12.0.dev0]: https://github.com/flexcompute/tidy3d/compare/v2.11.2...v2.12.0.dev0
 [2.11.2]: https://github.com/flexcompute/tidy3d/compare/v2.11.1...v2.11.2
 [2.11.1]: https://github.com/flexcompute/tidy3d/compare/v2.11.0...v2.11.1

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: tidy3d
-Version: 2.12.0.dev0
+Version: 2.12.0.dev1
 Summary: A fast FDTD solver
 Project-URL: Homepage, https://github.com/flexcompute/tidy3d
 Project-URL: Repository, https://github.com/flexcompute/tidy3d
@@ -142,7 +142,7 @@ Requires-Dist: sphinx<9.0.0,>=6; extra == 'docs'
 Requires-Dist: sphinxemoji<0.4.0,>=0.3.2; extra == 'docs'
 Requires-Dist: tmm<0.3.0,>=0.2.0; extra == 'docs'
 Provides-Extra: extras
-Requires-Dist: tidy3d-extras==2.12.0.dev0; extra == 'extras'
+Requires-Dist: tidy3d-extras==2.12.0.dev1; extra == 'extras'
 Provides-Extra: gdstk
 Requires-Dist: gdstk<1.1,>=0.9.49; extra == 'gdstk'
 Provides-Extra: heatcharge

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/charge/convergence.rst

@@ -138,3 +138,4 @@ names the offending feature:
 
 - ``MasettiMobility``
 - SSAC ``at_voltages`` bias-point selection
+- ``SteadyChargeResidualMonitor`` (per-node residual debug monitor)

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/charge/monitor.rst

@@ -26,3 +26,4 @@ outputs and do not satisfy this requirement on their own.
    SteadyCurrentDensityMonitor
    SteadyElectricFieldMonitor
    SteadyEnergyBandMonitor
+   SteadyChargeResidualMonitor

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/charge/output_data.rst

@@ -46,6 +46,7 @@ Monitor Data
    SteadyCapacitanceData
    SteadyElectricFieldData
    SteadyCurrentDensityData
+   SteadyChargeResidualData
 
 Device Data
 ^^^^^^^^^^^^

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/constants.rst

@@ -63,6 +63,7 @@ Units
    constants.MICROMETER
    constants.NANOMETER
    constants.RADIAN
+   constants.STERADIAN
    constants.CONDUCTIVITY
    constants.PERMITTIVITY
    constants.PML_SIGMA
@@ -73,6 +74,7 @@ Units
    constants.CMCUBE
    constants.PERCMCUBE
    constants.WATT
+   constants.COULOMB
    constants.VOLT
    constants.THERMAL_CONDUCTIVITY
    constants.SPECIFIC_HEAT_CAPACITY

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/monitors.rst

@@ -37,9 +37,20 @@ Field
    :template: module.rst
 
    FieldMonitor
+   PointCloudFieldMonitor
+   DipoleEmissionMonitor
    FieldTimeMonitor
 
-The ``FieldMonitor`` records the EM field components within a spatial region at specified frequency point(s). The ``FieldTimeMonitor`` does the same, except at specified time intervals instead of frequency.
+The ``FieldMonitor`` records the EM field components within a spatial region at
+specified frequency point(s). The ``PointCloudFieldMonitor`` records
+frequency-domain EM field components at arbitrary point coordinates. The
+``DipoleEmissionMonitor`` records reduced dipole-emission radiation intensity at
+point-cloud positions and is typically created by the
+:doc:`dipole emission plugin <plugins/dipole_emission>`. The
+``FieldTimeMonitor`` does the same as ``FieldMonitor``, except at specified time
+intervals instead of frequency.
+
+Point-cloud field data is indexed by point rather than by structured ``x`` / ``y`` / ``z`` grid coordinates, so structured-grid plotting helpers such as ``SimulationData.plot_field()`` do not support ``PointCloudFieldData``.
 
 .. code-block:: python
 
@@ -51,6 +62,17 @@ The ``FieldMonitor`` records the EM field components within a spatial region at
        freqs=[f0],
    )
 
+   # define a point-cloud field monitor at arbitrary coordinates
+   my_point_cloud_monitor = PointCloudFieldMonitor(
+       points=PointDataArray(
+           [[0.0, 0.0, 0.0], [0.1, 0.2, 0.3]],
+           coords={"index": [0, 1], "axis": [0, 1, 2]},
+       ),
+       fields=["Ex", "Hy"],
+       name='My point-cloud monitor',
+       freqs=[f0],
+   )
+
    # define a 1D field-time monitor starting at 1ps
    my_fieldtime_monitor = FieldTimeMonitor(
        center=(0,0,0),

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/output_data.rst

@@ -49,6 +49,8 @@ List of Monitor Data Types
    :template: module.rst
 
    FieldData
+   PointCloudFieldData
+   DipoleEmissionData
    FieldTimeData
    ModeSolverData
    PermittivityData
@@ -77,6 +79,10 @@ List of Dataset Types
    SpatialDataArray
    PermittivityDataset
    ScalarFieldDataArray
+   SphericalAngleDataArray
+   DipoleEmissionDataArray
+   DipoleEmissionPositionDataArray
+   PointCloudFieldDataset
    ScalarModeFieldDataArray
    ScalarFieldTimeDataArray
    components.data.data_array.FreqDataArray

tidy3d-2.12.0.dev1/docs/api/plugins/dipole_emission.rst

@@ -0,0 +1,124 @@
+.. currentmodule:: tidy3d
+
+Dipole Emission Study Plugin
+============================
+
+The dipole emission plugin evaluates radiative emission from classical electric
+dipoles embedded in a passive optical structure. It reports angular radiation
+intensity per squared dipole moment for x-, y-, and z-oriented dipoles into a
+selected collection half-space. By default, the result is summed over all
+sampled dipole positions using ``position_weights``. ``position_weights`` may
+represent emitter-density quadrature weights, and may provide one weight per
+position or one weight per position and dipole axis.
+
+The main result is ``radiation_intensity`` with dimensions
+``("dipole_axis", "polarization", "angle", "f")``:
+
+* ``radiation_intensity`` is stored and includes the study ``source_time`` spectrum.
+* ``radiation_intensity_transfer(bulk_refractive_index)`` is a derived method that
+  normalizes by the total power the same dipoles would emit in a uniform medium at
+  the given refractive index, yielding the cavity transfer in ``1/sr``. Integrating
+  it over the study's collection solid angle gives the half-space radiative
+  contribution; for a bulk emitter a single study integrates to ``1/2`` (the full
+  radiative Purcell factor requires both collection half-spaces).
+
+Use ``store_position_indexes`` to additionally retain radiation intensity at
+selected individual positions. The stored optional array has dimensions
+``("index", "dipole_axis", "polarization", "angle", "f")``, with a matching
+derived transfer method.
+
+Both outputs are normalized per squared electric dipole moment, with dipole
+moment expressed in ``C*um``. The emitted field is linear in the dipole moment
+``d``, so the radiated power scales as ``|d|**2``. Multiplying
+``radiation_intensity`` by the physical ``|d|**2`` gives the corresponding
+angular power density in ``W/sr``. The transfer methods are normalized ratios:
+the ``source_time`` spectrum and the dipole-moment scaling cancel between the
+radiated and bulk emitted powers.
+If the dipole strength varies with position or orientation, include those
+relative ``|d|**2`` factors in ``position_weights``.
+
+Defining a Study
+----------------
+
+Use ``base_sim`` for the source-free optical environment and
+``analysis_region`` for the region containing the emitters and the part of the
+structure whose scattering response contributes to the collected radiation. The
+``normal_axis`` and ``direction`` of the analysis region select the collection
+side. For example, ``normal_axis=2`` and ``direction="+"`` describes emission
+collected toward ``+z``. ``base_sim`` must be three-dimensional; the radiation
+intensity is a per-solid-angle quantity, so 2D simulations (a zero-size
+dimension) are rejected.
+
+Far-field directions are supplied as a :class:`SphericalAngleDataArray`, with
+``theta`` and ``phi`` in radians. ``theta`` is measured away from the selected
+collection normal and must satisfy ``abs(theta) < pi/2``. The ``p``
+polarization lies in the plane formed by the observation direction and
+collection normal; ``s`` is orthogonal to that plane. On the result, the
+per-direction angles are read from the ``DipoleEmissionStudyData.theta`` and
+``.phi`` properties; the data arrays carry only an integer ``angle`` index.
+
+.. code-block:: python
+
+   import tidy3d as td
+   from tidy3d.plugins import dipole_emission
+
+   # Define base_sim as a source-free td.Simulation containing the optical structure.
+
+   positions = td.PointDataArray(
+       [[0.0, 0.0, 0.0], [0.1, 0.0, 0.0]]
+   )
+
+   angles = td.SphericalAngleDataArray(
+       [[0.0, 0.0], [0.3, 0.5]]
+   )
+
+   region = dipole_emission.EmissionAnalysisRegion(
+       center=(0, 0, 0),
+       size=(2, 2, 2),
+       normal_axis=2,
+       direction="+",
+       dl=0.02,
+   )
+
+   study = dipole_emission.DipoleEmissionStudy(
+       base_sim=base_sim,
+       analysis_region=region,
+       positions=positions,
+       position_weights=[1.0, 1.0],
+       store_position_indexes=(0,),
+       source_time=td.GaussianPulse(freq0=freq0, fwidth=fwidth),
+       freqs=[freq0],
+       angles=angles,
+       polarizations=("p", "s"),
+   )
+
+   data = study.run(folder_name="dipole_emission")
+
+Notes
+-----
+
+Ordinary monitors in ``base_sim`` are copied into every angle and polarization
+task as diagnostics. Their data is available only from the returned batch data,
+for example with ``study.run(..., return_batch_data=True)``.
+
+The study targets radiative emission into a continuum of far-field directions.
+Non-radiative channels, ohmic absorption, surface-plasmon coupling, and trapped
+guided-mode power are not included in the returned radiation intensity.
+
+The v1 workflow is intended for open finite-domain collection geometries. Base
+simulations whose boundary conditions are incompatible with the generated
+reciprocal probes are rejected during ordinary Tidy3D validation.
+
+API Reference
+-------------
+
+.. autosummary::
+   :toctree: ../_autosummary/
+   :template: module.rst
+
+   plugins.dipole_emission.EmissionAnalysisRegion
+   plugins.dipole_emission.DipoleEmissionStudy
+   plugins.dipole_emission.DipoleEmissionStudyData
+   plugins.dipole_emission.DipoleEmissionStudyDataArray
+   plugins.dipole_emission.DipoleEmissionStudyPositionDataArray
+   SphericalAngleDataArray

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/api/plugins/index.rst

@@ -8,6 +8,7 @@ Plugins
    dispersion
    polyslab
    smatrix
+   dipole_emission
    resonance
    autograd
    pytorch

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/conf.py

@@ -180,6 +180,11 @@ html_theme_options = {
     "use_download_button": True,
     "pygment_light_style": "colorful",
     "pygment_dark_style": "material",
+    # Keep search in the primary sidebar only; inherited navbar search is a duplicate.
+    "navbar_start": [],
+    "navbar_center": [],
+    "navbar_end": [],
+    "navbar_persistent": [],
 }
 latex_engine = "xelatex"
 language = "en"

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/docs/extras/index.rst

@@ -53,6 +53,7 @@ Currently, ``tidy3d-extras`` provides the following features:
 - ``BroadbandPulse`` source time for injecting significant energy across a wide custom frequency range.
 - Computation of voltage and current transformation matrices for transmission line terminals. Requires an **RF license**.
 - Vector fitting of array-valued frequency-domain data via ``_vector_fit``.
+- Local reduction of dipole-emission study data into angular radiation intensity.
 
 By default, these features are automatically enabled if the ``tidy3d-extras``
 package is installed. The following functions benefit from local subpixel

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/pyproject.toml

@@ -1,6 +1,6 @@
 [project]
 name = "tidy3d"
-version = "2.12.0.dev0"
+version = "2.12.0.dev1"
 description = "A fast FDTD solver"
 readme = "README.md"
 requires-python = ">=3.10,<3.15"
@@ -194,7 +194,7 @@ design = [
   "pygad==3.6.0",
   "pyswarms>=1.3.0,<2.0.0",
 ]
-extras = ["tidy3d-extras==2.12.0.dev0"]
+extras = ["tidy3d-extras==2.12.0.dev1"]
 
 [project.scripts]
 tidy3d = "tidy3d.web.cli:tidy3d_cli"

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/schemas/EMESimulation.json

@@ -14614,7 +14614,7 @@
       "type": "string"
     },
     "version": {
-      "default": "2.12.0.dev0",
+      "default": "2.12.0.dev1",
       "type": "string"
     }
   },

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/schemas/HeatChargeSimulation.json

@@ -9048,6 +9048,79 @@
       },
       "type": "object"
     },
+    "SteadyChargeResidualMonitor": {
+      "additionalProperties": false,
+      "properties": {
+        "attrs": {
+          "additionalProperties": true,
+          "default": {},
+          "type": "object"
+        },
+        "center": {
+          "default": [
+            0.0,
+            0.0,
+            0.0
+          ],
+          "maxItems": 3,
+          "minItems": 3,
+          "prefixItems": [
+            {
+              "type": "number"
+            },
+            {
+              "type": "number"
+            },
+            {
+              "type": "number"
+            }
+          ],
+          "type": "array"
+        },
+        "conformal": {
+          "default": false,
+          "type": "boolean"
+        },
+        "name": {
+          "minLength": 1,
+          "type": "string"
+        },
+        "size": {
+          "maxItems": 3,
+          "minItems": 3,
+          "prefixItems": [
+            {
+              "minimum": 0,
+              "type": "number"
+            },
+            {
+              "minimum": 0,
+              "type": "number"
+            },
+            {
+              "minimum": 0,
+              "type": "number"
+            }
+          ],
+          "type": "array"
+        },
+        "type": {
+          "const": "SteadyChargeResidualMonitor",
+          "default": "SteadyChargeResidualMonitor",
+          "type": "string"
+        },
+        "unstructured": {
+          "const": true,
+          "default": true,
+          "type": "boolean"
+        }
+      },
+      "required": [
+        "name",
+        "size"
+      ],
+      "type": "object"
+    },
     "SteadyCurrentDensityMonitor": {
       "additionalProperties": false,
       "properties": {
@@ -10884,6 +10957,7 @@
         "discriminator": {
           "mapping": {
             "SteadyCapacitanceMonitor": "#/$defs/SteadyCapacitanceMonitor",
+            "SteadyChargeResidualMonitor": "#/$defs/SteadyChargeResidualMonitor",
             "SteadyCurrentDensityMonitor": "#/$defs/SteadyCurrentDensityMonitor",
             "SteadyElectricFieldMonitor": "#/$defs/SteadyElectricFieldMonitor",
             "SteadyEnergyBandMonitor": "#/$defs/SteadyEnergyBandMonitor",
@@ -10897,6 +10971,9 @@
           {
             "$ref": "#/$defs/SteadyCapacitanceMonitor"
           },
+          {
+            "$ref": "#/$defs/SteadyChargeResidualMonitor"
+          },
           {
             "$ref": "#/$defs/SteadyCurrentDensityMonitor"
           },
@@ -11042,7 +11119,7 @@
       "type": "boolean"
     },
     "version": {
-      "default": "2.12.0.dev0",
+      "default": "2.12.0.dev1",
       "type": "string"
     }
   },

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/schemas/HeatSimulation.json

@@ -9048,6 +9048,79 @@
       },
       "type": "object"
     },
+    "SteadyChargeResidualMonitor": {
+      "additionalProperties": false,
+      "properties": {
+        "attrs": {
+          "additionalProperties": true,
+          "default": {},
+          "type": "object"
+        },
+        "center": {
+          "default": [
+            0.0,
+            0.0,
+            0.0
+          ],
+          "maxItems": 3,
+          "minItems": 3,
+          "prefixItems": [
+            {
+              "type": "number"
+            },
+            {
+              "type": "number"
+            },
+            {
+              "type": "number"
+            }
+          ],
+          "type": "array"
+        },
+        "conformal": {
+          "default": false,
+          "type": "boolean"
+        },
+        "name": {
+          "minLength": 1,
+          "type": "string"
+        },
+        "size": {
+          "maxItems": 3,
+          "minItems": 3,
+          "prefixItems": [
+            {
+              "minimum": 0,
+              "type": "number"
+            },
+            {
+              "minimum": 0,
+              "type": "number"
+            },
+            {
+              "minimum": 0,
+              "type": "number"
+            }
+          ],
+          "type": "array"
+        },
+        "type": {
+          "const": "SteadyChargeResidualMonitor",
+          "default": "SteadyChargeResidualMonitor",
+          "type": "string"
+        },
+        "unstructured": {
+          "const": true,
+          "default": true,
+          "type": "boolean"
+        }
+      },
+      "required": [
+        "name",
+        "size"
+      ],
+      "type": "object"
+    },
     "SteadyCurrentDensityMonitor": {
       "additionalProperties": false,
       "properties": {
@@ -10884,6 +10957,7 @@
         "discriminator": {
           "mapping": {
             "SteadyCapacitanceMonitor": "#/$defs/SteadyCapacitanceMonitor",
+            "SteadyChargeResidualMonitor": "#/$defs/SteadyChargeResidualMonitor",
             "SteadyCurrentDensityMonitor": "#/$defs/SteadyCurrentDensityMonitor",
             "SteadyElectricFieldMonitor": "#/$defs/SteadyElectricFieldMonitor",
             "SteadyEnergyBandMonitor": "#/$defs/SteadyEnergyBandMonitor",
@@ -10897,6 +10971,9 @@
           {
             "$ref": "#/$defs/SteadyCapacitanceMonitor"
           },
+          {
+            "$ref": "#/$defs/SteadyChargeResidualMonitor"
+          },
           {
             "$ref": "#/$defs/SteadyCurrentDensityMonitor"
           },
@@ -11042,7 +11119,7 @@
       "type": "boolean"
     },
     "version": {
-      "default": "2.12.0.dev0",
+      "default": "2.12.0.dev1",
       "type": "string"
     }
   },

{tidy3d-2.12.0.dev0 → tidy3d-2.12.0.dev1}/schemas/ModeSimulation.json

@@ -14525,7 +14525,7 @@
       "type": "boolean"
     },
     "version": {
-      "default": "2.12.0.dev0",
+      "default": "2.12.0.dev1",
       "type": "string"
     }
   },