tencentcloud-sdk-python-intl-en 3.1.172__tar.gz → 3.1.174__tar.gz

{tencentcloud_sdk_python_intl_en-3.1.172/tencentcloud_sdk_python_intl_en.egg-info → tencentcloud_sdk_python_intl_en-3.1.174}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: tencentcloud-sdk-python-intl-en
-Version: 3.1.172
+Version: 3.1.174
 Summary: Tencent Cloud SDK for Python
 Home-page: https://github.com/TencentCloud/tencentcloud-sdk-python-intl-en
 Author: Tencent Cloud

{tencentcloud_sdk_python_intl_en-3.1.172 → tencentcloud_sdk_python_intl_en-3.1.174}/tencentcloud/__init__.py

@@ -13,4 +13,4 @@
 # See the License for the specific language governing permissions and
 # limitations under the License.
 
-__version__ = '3.1.172'
+__version__ = '3.1.174'

tencentcloud_sdk_python_intl_en-3.1.174/tencentcloud/ga2/v20250115/errorcodes.py

@@ -0,0 +1,333 @@
+# -*- coding: utf8 -*-
+# Copyright (c) 2017-2025 Tencent. All Rights Reserved.
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#    http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+
+# Failed to create a global acceleration instance. Retry your request. If the problem persists, contact Tencent Cloud customer service.
+FAILEDOPERATION_CREATEGLOBALACCELERATORFAILED = 'FailedOperation.CreateGlobalAcceleratorFailed'
+
+# Insufficient resources to create the port range.
+FAILEDOPERATION_INSUFFICIENTRESOURCES = 'FailedOperation.InsufficientResources'
+
+# Layer-7 listeners do not support carrying the parameter `%(value)s`.
+INVALIDPARAMETER_APPLICATIONLAYERLISTENERCANNOTCARRYPARAMETERS = 'InvalidParameter.ApplicationLayerListenerCannotCarryParameters'
+
+# Health check is disabled for the terminal node group configuration. Carrying the parameter `%(parameter)s` is forbidden.
+INVALIDPARAMETER_DISABLEHEALTHCHECKNOTCARRYPARAMETERS = 'InvalidParameter.DisableHealthCheckNotCarryParameters'
+
+# Health check is disabled for the terminal node group, so the parameter `%(parameter)s` cannot be carried.
+INVALIDPARAMETER_ENABLEHEALTHCHECKNOTCARRYPARAMETERS = 'InvalidParameter.EnableHealthCheckNotCarryParameters'
+
+# When configuring HTTP check, you need to carry the parameter `%(value)s`.
+INVALIDPARAMETER_ENDPOINTGROUPCHECKTYPEHTTPCARRYPARAMETERS = 'InvalidParameter.EndpointGroupCheckTypeHttpCarryParameters'
+
+# Http listeners do not support carrying the parameter `%(value)s`.
+INVALIDPARAMETER_HTTPLISTENERCANNOTCARRYPARAMETERS = 'InvalidParameter.HttpListenerCannotCarryParameters'
+
+# 
+INVALIDPARAMETER_HTTPSLISTENERCANCARRYPARAMETERS = 'InvalidParameter.HttpsListenerCanCarryParameters'
+
+# The `%(value)s` parameter is supported only for the HTTPS back-to-source protocol.
+INVALIDPARAMETER_HTTPSORIGINSERVERPROTOCOLSUPPORTSPARAMETERS = 'InvalidParameter.HttpsOriginServerProtocolSupportsParameters'
+
+# The input parameter `%(key)s` in the request duplicates existing data.
+INVALIDPARAMETER_INPUTDUPLICATEWITHEXISTINGDATA = 'InvalidParameter.InputDuplicateWithExistingData'
+
+# The in-progress request must have one of the `%(value)s` input parameters.
+INVALIDPARAMETER_INPUTMUSTEXISTONE = 'InvalidParameter.InputMustExistOne'
+
+# The in-progress request input parameter `%(key)s` is required and within the `%(value)s` range.
+INVALIDPARAMETER_INPUTOUTOFRANGE = 'InvalidParameter.InputOutOfRange'
+
+# The input parameter `%(key)s` in the request has duplicate values.
+INVALIDPARAMETER_INPUTREPEAT = 'InvalidParameter.InputRepeat'
+
+# The `%(value)s` parameter is required only when HTTP check is configured.
+INVALIDPARAMETER_ONLYENDPOINTGROUPCHECKTYPEHTTPCARRYPARAMETERS = 'InvalidParameter.OnlyEndpointGroupCheckTypeHttpCarryParameters'
+
+# Only a single port is supported.
+INVALIDPARAMETER_SINGLEPORT = 'InvalidParameter.SinglePort'
+
+# Tcp terminal node groups do not support carrying the parameter `%(value)s`.
+INVALIDPARAMETER_TCPENDPOINTGROUPCANNOTCARRYPARAMETERS = 'InvalidParameter.TcpEndpointGroupCannotCarryParameters'
+
+# 
+INVALIDPARAMETER_TCPLISTENERCARRYPARAMETERS = 'InvalidParameter.TcpListenerCarryParameters'
+
+# L4 terminal node groups do not support carrying the parameter `%(value)s`.
+INVALIDPARAMETER_TRANSPORTLAYERENDPOINTGROUPCANNOTCARRYPARAMETERS = 'InvalidParameter.TransportLayerEndpointGroupCannotCarryParameters'
+
+# Layer-4 listeners do not support carrying the parameter `%(value)s`.
+INVALIDPARAMETER_TRANSPORTLAYERLISTENERCANNOTCARRYPARAMETERS = 'InvalidParameter.TransportLayerListenerCannotCarryParameters'
+
+# Udp terminal node group does not support carrying the parameter `%(value)s`.
+INVALIDPARAMETER_UDPENDPOINTGROUPCANNOTCARRYPARAMETERS = 'InvalidParameter.UdpEndpointGroupCannotCarryParameters'
+
+# Parameter value error.
+INVALIDPARAMETERVALUE = 'InvalidParameterValue'
+
+# Can only be printable ASCII characters.
+INVALIDPARAMETERVALUE_ASCIICHARACTERS = 'InvalidParameterValue.AsciiCharacters'
+
+# Certificate `%(value)s` duplicates an existing cert.
+INVALIDPARAMETERVALUE_CERTIFICATESCONFLICT = 'InvalidParameterValue.CertificatesConflict'
+
+# Parameter `%(parameter)s` cannot be empty.
+INVALIDPARAMETERVALUE_EMPTY = 'InvalidParameterValue.Empty'
+
+# Layer-7 forwarding policy domain name duplicates an existing one.
+INVALIDPARAMETERVALUE_FORWARDINGPOLICYHOSTCONFLICT = 'InvalidParameterValue.ForwardingPolicyHostConflict'
+
+# The Path of the Layer 7 forwarding rule duplicates an existing one.
+INVALIDPARAMETERVALUE_FORWARDINGRULEPATHCONFLICT = 'InvalidParameterValue.ForwardingRulePathConflict'
+
+# The instance object `%(value)s` has a mismatched relationship.
+INVALIDPARAMETERVALUE_INSTANCEMISMATCH = 'InvalidParameterValue.InstanceMismatch'
+
+# Instance name must start with an uppercase/lowercase character or Chinese character, and support digits, periods, hyphens, and underscores.
+INVALIDPARAMETERVALUE_INSTANCENAME = 'InvalidParameterValue.InstanceName'
+
+# 
+INVALIDPARAMETERVALUE_INTERNALRESERVEDFIELDS = 'InvalidParameterValue.InternalReservedFields'
+
+# 
+INVALIDPARAMETERVALUE_INVALIDPARAMETERVALUEOFFSET = 'InvalidParameterValue.InvalidParameterValueOffset'
+
+# 
+INVALIDPARAMETERVALUE_LENGTHRANGE = 'InvalidParameterValue.LengthRange'
+
+# The number of `%(parameter)s` values `%(value)s` exceeds the limit. It cannot be greater than `%(limit)s`.
+INVALIDPARAMETERVALUE_LIMITEXCEEDED = 'InvalidParameterValue.LimitExceeded'
+
+# The terminal node group listening port should be consistent with the listener port that the terminal node group belongs to.
+INVALIDPARAMETERVALUE_LISTENERPORTNOTEQUAL = 'InvalidParameterValue.ListenerPortNotEqual'
+
+# Logset topic `%(value)s` does not exist.
+INVALIDPARAMETERVALUE_LOGSETNOTEXIST = 'InvalidParameterValue.LogsetNotExist'
+
+# Parameter value `%(value)s` of `%(parameter)s` is invalid. A correct and complete value is in the form of `%(template)s`.
+INVALIDPARAMETERVALUE_MALFORMED = 'InvalidParameterValue.Malformed'
+
+# A listener port cannot be mapped to multiple origin ports currently.
+INVALIDPARAMETERVALUE_NOTMAPPINGMANYPORT = 'InvalidParameterValue.NotMappingManyPort'
+
+# 
+INVALIDPARAMETERVALUE_NOTTENCENTREGION = 'InvalidParameterValue.NotTencentRegion'
+
+# Parameter `%(value)s` is not in the allowed public IP ranges.
+INVALIDPARAMETERVALUE_NOTWITHINPUBLICNETWORK = 'InvalidParameterValue.NotWithinPublicNetwork'
+
+# The value `%(value)s` of the parameter `%(parameter)s` must be within the range `%(value_range)s`.
+INVALIDPARAMETERVALUE_RANGE = 'InvalidParameterValue.Range'
+
+# FromPort `%(fromPort)s` should be less than or equal to ToPort `%(toPort)s`.
+INVALIDPARAMETERVALUE_SEGMENTPORTRANGE = 'InvalidParameterValue.SegmentPortRange'
+
+# Parameter value `%(value)s` cannot contain special characters `%(key)s`.
+INVALIDPARAMETERVALUE_SPECIALCHARACTERS = 'InvalidParameterValue.SpecialCharacters'
+
+# Parameter value `%(value)s` can only contain characters `%(key)s`.
+INVALIDPARAMETERVALUE_SPECIFICCHARACTERS = 'InvalidParameterValue.SpecificCharacters'
+
+# Asynchronous task ID does not exist.
+INVALIDPARAMETERVALUE_TASKNOTFOUND = 'InvalidParameterValue.TaskNotFound'
+
+# The current TCP protocol series listener port duplicates an existing listener port.
+INVALIDPARAMETERVALUE_TCPSERIESLISTENERPORTEQUAL = 'InvalidParameterValue.TcpSeriesListenerPortEqual'
+
+# Currently, the global acceleration instance has third-party node acceleration regions configured. The listener port cannot be the same.
+INVALIDPARAMETERVALUE_THIRDAREALISTENERPORTEQUAL = 'InvalidParameterValue.ThirdAreaListenerPortEqual'
+
+# Currently, the global acceleration instance does not support configuring listener port ranges for third-party nodes.
+INVALIDPARAMETERVALUE_THIRDAREALISTENERPORTSEGMENT = 'InvalidParameterValue.ThirdAreaListenerPortSegment'
+
+# Parameter value `%(value)s` length cannot be greater than `%(max_size)s`.
+INVALIDPARAMETERVALUE_TOOLONG = 'InvalidParameterValue.TooLong'
+
+# The current UDP listener port is duplicated with an existing listener port.
+INVALIDPARAMETERVALUE_UDPSERIESLISTENERPORTEQUAL = 'InvalidParameterValue.UdpSeriesListenerPortEqual'
+
+# 
+INVALIDPARAMETERVALUE_VPGHAGROUPNOTFOUND = 'InvalidParameterValue.VpgHaGroupNotFound'
+
+# 
+INVALIDPARAMETERVALUE_WRONGATTRIBUTIONRELATIONSHIP = 'InvalidParameterValue.WrongAttributionRelationship'
+
+# The quota limit is exceeded.
+LIMITEXCEEDED = 'LimitExceeded'
+
+# Parameters are missing.
+MISSINGPARAMETER = 'MissingParameter'
+
+# Currently a layer-7 terminal node group. The request is missing the required parameter `%(parameter)s`.
+MISSINGPARAMETER_APPLICATIONLAYERENDPOINTGROUPPARAMETER = 'MissingParameter.ApplicationLayerEndpointGroupParameter'
+
+# When the terminal node group configuration is set to custom check, the request is missing required parameter `%(parameter)s`.
+MISSINGPARAMETER_CUSTOMCHECKTYPEPARAMETER = 'MissingParameter.CustomCheckTypeParameter'
+
+# Health check is enabled for the terminal node group configuration. The request is missing the required parameter `%(parameter)s`.
+MISSINGPARAMETER_ENABLEHEALTHCHECKPARAMETER = 'MissingParameter.EnableHealthCheckParameter'
+
+# 
+MISSINGPARAMETER_INTERNALNETWORKSOURCE = 'MissingParameter.InternalNetworkSource'
+
+# 
+MISSINGPARAMETER_ISPTYPE = 'MissingParameter.IspType'
+
+# 
+RESOURCEINUSE_EDGEACCELERATEAREA = 'ResourceInUse.EdgeAccelerateArea'
+
+# The resource does not exist.
+RESOURCENOTFOUND = 'ResourceNotFound'
+
+# Acceleration region `%(value)s` already exists.
+UNSUPPORTEDOPERATION_ACCELERATEREGIONREPEAT = 'UnsupportedOperation.AccelerateRegionRepeat'
+
+# Account frozen. The current operation is not supported.
+UNSUPPORTEDOPERATION_ACCOUNTFROZEN = 'UnsupportedOperation.AccountFrozen'
+
+# Cross-border is enabled. Repeated operation is not supported.
+UNSUPPORTEDOPERATION_ALREADYENABLECROSSBORDER = 'UnsupportedOperation.AlreadyEnableCrossBorder'
+
+# The default layer-7 forwarding rule cannot be deleted.
+UNSUPPORTEDOPERATION_APPLICATIONLAYERENDPOINTGROUPNOTDELETE = 'UnsupportedOperation.ApplicationLayerEndpointGroupNotDelete'
+
+# Sorry, your operation cannot be completed temporarily. Please retry later or contact customer service.
+UNSUPPORTEDOPERATION_BILLINGFAILED = 'UnsupportedOperation.BillingFailed'
+
+# No operations allowed on the CA certificate.
+UNSUPPORTEDOPERATION_CACERTIFICATESOPERATE = 'UnsupportedOperation.CaCertificatesOperate'
+
+# 
+UNSUPPORTEDOPERATION_CERTIFICATENOTCA = 'UnsupportedOperation.CertificateNotCa'
+
+# The cross-border commitment letter is not signed. The current operation is not supported.
+UNSUPPORTEDOPERATION_CROSSBORDERPROMISENOTSIGNED = 'UnsupportedOperation.CrossBorderPromiseNotSigned'
+
+# The current account does not support this operation.
+UNSUPPORTEDOPERATION_CURRENTACCOUNTNOTALLOWED = 'UnsupportedOperation.CurrentAccountNotAllowed'
+
+# No operations allowed on the default certificate.
+UNSUPPORTEDOPERATION_DEFAULTCERTIFICATESOPERATE = 'UnsupportedOperation.DefaultCertificatesOperate'
+
+# No operations are allowed for the default layer-7 forwarding policy rules.
+UNSUPPORTEDOPERATION_DEFAULTFORWARDINGPOLICYOPERATE = 'UnsupportedOperation.DefaultForwardingPolicyOperate'
+
+# The default Layer 7 forwarding rule is not allowed to be modified: `%(value)s`.
+UNSUPPORTEDOPERATION_DEFAULTFORWARDINGRULEOPERATE = 'UnsupportedOperation.DefaultForwardingRuleOperate'
+
+# The replacement certificate domain name does not match the old certificate domain name.
+UNSUPPORTEDOPERATION_DOMAINMISMATCHED = 'UnsupportedOperation.DomainMismatched'
+
+# Please do not repeat the operation on the current instance status.
+UNSUPPORTEDOPERATION_DUPLICATEINSTANCESTATUS = 'UnsupportedOperation.DuplicateInstanceStatus'
+
+# Cross-border type settings are not supported for the current user.
+UNSUPPORTEDOPERATION_ENABLECROSSBORDER = 'UnsupportedOperation.EnableCrossBorder'
+
+# An acceleration region exists. The current operation is not supported.
+UNSUPPORTEDOPERATION_EXISTACCELERATORAREA = 'UnsupportedOperation.ExistAcceleratorArea'
+
+# A default access control policy that permits all traffic through the access channel exists. The current operation is not supported.
+UNSUPPORTEDOPERATION_EXISTACCEPTACLPOLICY = 'UnsupportedOperation.ExistAcceptAclPolicy'
+
+# An access log exists. The current operation is not supported.
+UNSUPPORTEDOPERATION_EXISTACCESSLOG = 'UnsupportedOperation.ExistAccessLog'
+
+# An access rule with a deny policy is configured. The current operation is not supported.
+UNSUPPORTEDOPERATION_EXISTDROPACCEPTACLRULE = 'UnsupportedOperation.ExistDropAcceptAclRule'
+
+# A Layer 7 forwarding rule is configured with the terminal node group `%(value)s`. The current operation is not supported.
+UNSUPPORTEDOPERATION_EXISTFORWARDINGRULE = 'UnsupportedOperation.ExistForwardingRule'
+
+# A listener exists. The current operation is not supported.
+UNSUPPORTEDOPERATION_EXISTLISTENER = 'UnsupportedOperation.ExistListener'
+
+# A third-party node exists. Configuring a default connection policy to permit ALL traffic is not allowed.
+UNSUPPORTEDOPERATION_EXISTTHIRDPARTYNODES = 'UnsupportedOperation.ExistThirdPartyNodes'
+
+# Forwarding rules cannot be configured with a default terminal node group.
+UNSUPPORTEDOPERATION_FORWARDGROUPFORWARDINGRULEUNSUPPORTEDDEFAULTENDPOINTGROUP = 'UnsupportedOperation.ForwardGroupForwardingRuleUnsupportedDefaultEndpointGroup'
+
+# The maximum HTTP protocol version of the listener and terminal node group should be consistent.
+UNSUPPORTEDOPERATION_HTTPVERSIONINCONSISTENT = 'UnsupportedOperation.HttpVersionInconsistent'
+
+# The instance is not in the running state. The current operation is not supported.
+UNSUPPORTEDOPERATION_INSTANCENOTRUNNING = 'UnsupportedOperation.InstanceNotRunning'
+
+# Current instance status does not allow this operation.
+UNSUPPORTEDOPERATION_INSTANCESTATENOTALLOWEDOPERATE = 'UnsupportedOperation.InstanceStateNotAllowedOperate'
+
+# The account balance is insufficient.
+UNSUPPORTEDOPERATION_INSUFFICIENTFUNDS = 'UnsupportedOperation.InsufficientFunds'
+
+# The current global acceleration instance does not have the private network origin-pull feature enabled.
+UNSUPPORTEDOPERATION_INTERNALENDPOINTFEATURENOTENABLED = 'UnsupportedOperation.InternalEndpointFeatureNotEnabled'
+
+# IPv6 is not supported.
+UNSUPPORTEDOPERATION_IPV6NOTSUPPORT = 'UnsupportedOperation.Ipv6NotSupport'
+
+# The current account does not support port range configuration.
+UNSUPPORTEDOPERATION_LISTENERPORTSEGMENT = 'UnsupportedOperation.ListenerPortSegment'
+
+# Not supported. Please grant the permission first to enable the log task.
+UNSUPPORTEDOPERATION_NOTAUTHORIZATION = 'UnsupportedOperation.NotAuthorization'
+
+# The global acceleration instance has no cross-border type set. Cross-border acceleration regions or terminal node groups cannot be created.
+UNSUPPORTEDOPERATION_NOTSETCROSSBORDERTYPE = 'UnsupportedOperation.NotSetCrossBorderType'
+
+# 
+UNSUPPORTEDOPERATION_ONLYINTERNALCLB = 'UnsupportedOperation.OnlyInternalClb'
+
+# For TCP listeners only, client IP can be obtained through TOA.
+UNSUPPORTEDOPERATION_ONLYTCPLISTENERSUPPORTTOA = 'UnsupportedOperation.OnlyTcpListenerSupportToa'
+
+# Request parameter error. The current operation is not supported. Error message: `%(info)s`.
+UNSUPPORTEDOPERATION_REQUESTPARAMETERSERROR = 'UnsupportedOperation.RequestParametersError'
+
+# The current operation makes the terminal node group domain name the same as the global acceleration instance domain. The current operation is not supported.
+UNSUPPORTEDOPERATION_SAMEDOMAIN = 'UnsupportedOperation.SameDomain'
+
+# The current operation makes the terminal node group domain name match the public IP address of the global acceleration instance's acceleration region. The current operation is not supported.
+UNSUPPORTEDOPERATION_SAMEPUBLICIP = 'UnsupportedOperation.SamePublicIp'
+
+# The TOA feature is not enabled for the current global acceleration instance. Contact Tencent Cloud customer service to submit a request.
+UNSUPPORTEDOPERATION_TOAFEATURENOTENABLED = 'UnsupportedOperation.TOAFeatureNotEnabled'
+
+# 
+UNSUPPORTEDOPERATION_THIRDAREAHAVEPORTEQUALLISTENER = 'UnsupportedOperation.ThirdAreaHavePortEqualListener'
+
+# Creation of a triple-network acceleration region is not supported.
+UNSUPPORTEDOPERATION_THREENETWORKSACCELERATEAREAS = 'UnsupportedOperation.ThreeNetworksAccelerateAreas'
+
+# Creation of a triple-network terminal node group is not supported.
+UNSUPPORTEDOPERATION_THREENETWORKSENDPOINTGROUP = 'UnsupportedOperation.ThreeNetworksEndpointGroup'
+
+# Layer-4 listeners do not support creation of forwarding policies.
+UNSUPPORTEDOPERATION_TRANSPORTLAYERUNSUPPORTEDOPERATEFORWARDINGPOLICY = 'UnsupportedOperation.TransportLayerUnsupportedOperateForwardingPolicy'
+
+# 
+UNSUPPORTEDOPERATION_UDPLISTENERNOTSUPPORTPROXYPROTOCOL = 'UnsupportedOperation.UdpListenerNotSupportProxyProtocol'
+
+# Creation of third-party nodes is not supported.
+UNSUPPORTEDOPERATION_UNABLECREATETHIRDPARTYNODES = 'UnsupportedOperation.UnableCreateThirdPartyNodes'
+
+# Currently, cross-border acceleration regions or terminal node groups cannot be created for global acceleration instances.
+UNSUPPORTEDOPERATION_UNABLECROSSBORDER = 'UnsupportedOperation.UnableCrossBorder'
+
+# 
+UNSUPPORTEDOPERATION_UNLAWFULCERTIFICATE = 'UnsupportedOperation.UnlawfulCertificate'
+
+# Virtual terminal node groups do not support Tcp and Udp terminal node groups.
+UNSUPPORTEDOPERATION_VIRTUALENDPOINTGROUPUNSUPPORTEDTCPANDUDP = 'UnsupportedOperation.VirtualEndpointGroupUnsupportedTcpAndUdp'