stm32loader 0.7.0__tar.gz → 1.0.0.dev2__tar.gz

{stm32loader-0.7.0 → stm32loader-1.0.0.dev2}/PKG-INFO

@@ -1,44 +1,48 @@
-Metadata-Version: 2.1
+Metadata-Version: 2.4
 Name: stm32loader
-Version: 0.7.0
+Version: 1.0.0.dev2
 Summary: Flash firmware to STM32 microcontrollers using Python.
-Author: jsnyder
+Author: jsnyder, Floris Lambrechts
 Author-email: Floris Lambrechts <florisla@gmail.com>
-Requires-Python: >=3.9
-Description-Content-Type: text/markdown
-Classifier: License :: OSI Approved :: GNU General Public License v3 or later (GPLv3+)
+License-Expression: GPL-3.0-or-later
+License-File: LICENSE
 Classifier: Programming Language :: Python
 Classifier: Programming Language :: Python :: 3
 Classifier: Programming Language :: Python :: 3.9
 Classifier: Programming Language :: Python :: 3.10
 Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Classifier: Programming Language :: Python :: 3.13
+Classifier: Programming Language :: Python :: 3.14
+Classifier: Programming Language :: Python :: 3.15
 Classifier: Programming Language :: Python :: Implementation :: CPython
 Classifier: Programming Language :: Python :: Implementation :: PyPy
 Classifier: Natural Language :: English
 Classifier: Operating System :: OS Independent
 Requires-Dist: pyserial
 Requires-Dist: progress
-Requires-Dist: wheel ; extra == "dev"
-Requires-Dist: twine ; extra == "dev"
-Requires-Dist: pylint ; extra == "dev"
-Requires-Dist: flake8 ; extra == "dev"
-Requires-Dist: flake8-isort ; extra == "dev"
-Requires-Dist: black ; extra == "dev"
-Requires-Dist: bump-my-version ; extra == "dev"
-Requires-Dist: nox ; extra == "dev"
-Requires-Dist: cogapp ; extra == "dev"
-Requires-Dist: intelhex ; extra == "hex"
-Project-URL: BugTracker, https://github.com/florisla/stm32loader/issues
+Requires-Dist: intelhex ; extra == 'dev'
+Requires-Dist: pytest ; extra == 'dev'
+Requires-Dist: nox>=2026.2.9 ; extra == 'dev'
+Requires-Dist: nox-uv>=0.7.1 ; extra == 'dev'
+Requires-Dist: ruff ; extra == 'dev'
+Requires-Dist: pylint ; extra == 'dev'
+Requires-Dist: bump-my-version ; extra == 'dev'
+Requires-Dist: cogapp ; extra == 'dev'
+Requires-Dist: intelhex ; extra == 'hex'
+Requires-Python: >=3.9
 Project-URL: Home, https://github.com/florisla/stm32loader
+Project-URL: BugTracker, https://github.com/florisla/stm32loader/issues
 Project-URL: SourceCode, https://github.com/florisla/stm32loader
 Provides-Extra: dev
 Provides-Extra: hex
+Description-Content-Type: text/markdown
 
 # STM32Loader
 
 [![PyPI package](https://badge.fury.io/py/stm32loader.svg)](https://badge.fury.io/py/stm32loader)
-[![GitHub Actions](https://img.shields.io/github/workflow/status/florisla/stm32loader/Test?label=tests)](https://github.com/florisla/stm32loader/actions/workflows/test.yaml)
-[![GitHub Actions](https://img.shields.io/github/workflow/status/florisla/stm32loader/Lint?label=lint)](https://github.com/florisla/stm32loader/actions/workflows/lint.yaml)
+[![Test](https://github.com/florisla/stm32loader/actions/workflows/test.yaml/badge.svg)](https://github.com/florisla/stm32loader/actions/workflows/test.yaml)
+[![Lint](https://github.com/florisla/stm32loader/actions/workflows/lint.yaml/badge.svg)](https://github.com/florisla/stm32loader/actions/workflows/lint.yaml)
 [![License](https://img.shields.io/pypi/l/stm32loader.svg)](https://pypi.org/project/stm32loader/)
 [![Downloads](https://pepy.tech/badge/stm32loader)](https://pepy.tech/project/stm32loader)
 
@@ -48,13 +52,22 @@ ST Microelectronics STM32 microcontrollers over UART.
 Also supports ST BlueNRG devices, and the SweetPeas bootloader
 for Wiznet W7500.
 
-Compatible with Python version 3.9 to 3.11 and PyPy 3.9.
+Compatible with Python version 3.9-3.15 and PyPy 3.10-3.11.
+
+
+## Run using `uvx`
 
+    uvx stm32loader
 
-## Installation
+
+## Installation with pip
 
     pip install stm32loader
 
+To also support loading `.hex` files:
+
+    pip install stm32loader[hex]
+
 To install the latest development version:
 
     pip install git+https://github.com/florisla/stm32loader.git
@@ -78,7 +91,9 @@ sys.stdout.close()
 sys.stdout = sys.__stdout__
 ]]] -->
 ```
-usage: stm32loader [-h] [-e] [-u] [-x] [-w] [-v] [-r] [-l LENGTH] -p PORT [-b BAUD] [-a ADDRESS] [-g ADDRESS] [-f FAMILY]
+usage: stm32loader [-h] [-e] [-E] [-u] [-x] [--write-unprotect]
+                   [--write-protect] [-w] [-v] [-r] [-l LENGTH] -p PORT
+                   [-b BAUD] [-a ADDRESS | -o OFFSET] [-g ADDRESS] [-f FAMILY]
                    [-V] [-q] [-s] [-R] [-B] [-n] [-P {even,none}] [--version]
                    [FILE.BIN]
 
@@ -89,23 +104,35 @@ positional arguments:
 
 options:
   -h, --help            show this help message and exit
-  -e, --erase           Erase (note: this is required on previously written memory).
+  -e, --erase           Erase the full flash memory or a specific region
+                        (support --address and --length). Note: this is
+                        required on previously written memory.
+  -E, --auto-erase      Before writing, erase only the flash pages that the
+                        written data covers.
   -u, --unprotect       Unprotect flash from readout.
   -x, --protect         Protect flash against readout.
+  --write-unprotect     Disable write protection before flashing
+  --write-protect       Enable write protection after flashing
   -w, --write           Write file content to flash.
   -v, --verify          Verify flash content versus local file (recommended).
   -r, --read            Read from flash and store in local file.
-  -l LENGTH, --length LENGTH
-                        Length of read or erase.
-  -p PORT, --port PORT  Serial port (default: $STM32LOADER_SERIAL_PORT).
-  -b BAUD, --baud BAUD  Baudrate. (default: 115200)
-  -a ADDRESS, --address ADDRESS
-                        Target address for read, write or erase. (default: 134217728)
-  -g ADDRESS, --go-address ADDRESS
+  -l, --length LENGTH   Length of read or erase. For write and verify, use
+                        only this many bytes of the file.
+  -p, --port PORT       Serial port (default: $STM32LOADER_SERIAL_PORT).
+  -b, --baud BAUD       Baudrate. (default: 115200)
+  -a, --address ADDRESS
+                        Target address for read or write. For erase, this is
+                        used when you supply --length. Default: the start of
+                        flash memory.
+  -o, --offset OFFSET   Alternative to --address: an offset from the start of
+                        flash memory.
+  -g, --go-address ADDRESS
                         Start executing from address (0x08000000, usually).
-  -f FAMILY, --family FAMILY
-                        Device family to read out device UID and flash size; e.g F1 for STM32F1xx. Possible values: F0,
-                        F1, F3, F4, F7, H7, L4, L0, G0, NRG. (default: $STM32LOADER_FAMILY).
+  -f, --family FAMILY   Device family to read out device UID and flash size;
+                        e.g F1 for STM32F1xx. Possible values: C0, F0, F1, F2,
+                        F3, F4, F7, G0, G4, H5, H7, L0, L1, L4, L5, WBA, WB0,
+                        WB, WL, U5, W, NRG, WIZ, GD32VW55X (default:
+                        $STM32LOADER_FAMILY).
   -V, --verbose         Verbose mode.
   -q, --quiet           Quiet mode.
   -s, --swap-rts-dtr    Swap RTS and DTR: use RTS for reset and DTR for boot0.
@@ -114,8 +141,9 @@ options:
   -B, --boot0-active-low
                         Make BOOT0 active low.
   -n, --no-progress     Don't show progress bar.
-  -P {even,none}, --parity {even,none}
-                        Parity: "even" for STM32, "none" for BlueNRG. (default: even)
+  -P, --parity {even,none}
+                        Parity: "even" for STM32, "none" for BlueNRG.
+                        (default: even)
   --version             show program's version number and exit
 
 examples:
@@ -133,6 +161,16 @@ stm32loader --port /dev/tty.usbserial-ftCYPMYJ --erase --write --verify somefile
 This will pre-erase flash, write `somefile.bin` to the flash on the device, and then
 perform a verification after writing is finished.
 
+To erase only the flash pages that the new data will occupy, use `--auto-erase`
+instead of `--erase`:
+
+```
+stm32loader --port /dev/tty.usbserial-ftCYPMYJ --auto-erase --write --verify somefile.bin
+```
+
+The erased range is rounded out to whole pages (sectors), following the device's
+flash layout. This also works on devices with mixed sector sizes.
+
 You can skip the `--port` option by configuring environment variable
 `STM32LOADER_SERIAL_PORT`.
 Similarly, `--family` may be supplied through `STM32LOADER_FAMILY`.
@@ -223,13 +261,6 @@ adapter (it needs to toggle, whereas `BOOT0` does not).
 
 ## Not currently supported
 
-* Command-line argument for write protection/unprotection.
+* Command-line argument for write protection for some devices (e.g. those with dual-bank flash).
 * STM8 devices (ST `UM0560`).
 * Other bootloader protocols (e.g. I2C, HEX -> implemented in `stm32flash`).
-
-
-## Future work
-
-* Use f-strings.
-* Use proper logging instead of print statements.
-

{stm32loader-0.7.0 → stm32loader-1.0.0.dev2}/README.md

@@ -1,8 +1,8 @@
 # STM32Loader
 
 [![PyPI package](https://badge.fury.io/py/stm32loader.svg)](https://badge.fury.io/py/stm32loader)
-[![GitHub Actions](https://img.shields.io/github/workflow/status/florisla/stm32loader/Test?label=tests)](https://github.com/florisla/stm32loader/actions/workflows/test.yaml)
-[![GitHub Actions](https://img.shields.io/github/workflow/status/florisla/stm32loader/Lint?label=lint)](https://github.com/florisla/stm32loader/actions/workflows/lint.yaml)
+[![Test](https://github.com/florisla/stm32loader/actions/workflows/test.yaml/badge.svg)](https://github.com/florisla/stm32loader/actions/workflows/test.yaml)
+[![Lint](https://github.com/florisla/stm32loader/actions/workflows/lint.yaml/badge.svg)](https://github.com/florisla/stm32loader/actions/workflows/lint.yaml)
 [![License](https://img.shields.io/pypi/l/stm32loader.svg)](https://pypi.org/project/stm32loader/)
 [![Downloads](https://pepy.tech/badge/stm32loader)](https://pepy.tech/project/stm32loader)
 
@@ -12,13 +12,22 @@ ST Microelectronics STM32 microcontrollers over UART.
 Also supports ST BlueNRG devices, and the SweetPeas bootloader
 for Wiznet W7500.
 
-Compatible with Python version 3.9 to 3.11 and PyPy 3.9.
+Compatible with Python version 3.9-3.15 and PyPy 3.10-3.11.
 
 
-## Installation
+## Run using `uvx`
+
+    uvx stm32loader
+
+
+## Installation with pip
 
     pip install stm32loader
 
+To also support loading `.hex` files:
+
+    pip install stm32loader[hex]
+
 To install the latest development version:
 
     pip install git+https://github.com/florisla/stm32loader.git
@@ -42,7 +51,9 @@ sys.stdout.close()
 sys.stdout = sys.__stdout__
 ]]] -->
 ```
-usage: stm32loader [-h] [-e] [-u] [-x] [-w] [-v] [-r] [-l LENGTH] -p PORT [-b BAUD] [-a ADDRESS] [-g ADDRESS] [-f FAMILY]
+usage: stm32loader [-h] [-e] [-E] [-u] [-x] [--write-unprotect]
+                   [--write-protect] [-w] [-v] [-r] [-l LENGTH] -p PORT
+                   [-b BAUD] [-a ADDRESS | -o OFFSET] [-g ADDRESS] [-f FAMILY]
                    [-V] [-q] [-s] [-R] [-B] [-n] [-P {even,none}] [--version]
                    [FILE.BIN]
 
@@ -53,23 +64,35 @@ positional arguments:
 
 options:
   -h, --help            show this help message and exit
-  -e, --erase           Erase (note: this is required on previously written memory).
+  -e, --erase           Erase the full flash memory or a specific region
+                        (support --address and --length). Note: this is
+                        required on previously written memory.
+  -E, --auto-erase      Before writing, erase only the flash pages that the
+                        written data covers.
   -u, --unprotect       Unprotect flash from readout.
   -x, --protect         Protect flash against readout.
+  --write-unprotect     Disable write protection before flashing
+  --write-protect       Enable write protection after flashing
   -w, --write           Write file content to flash.
   -v, --verify          Verify flash content versus local file (recommended).
   -r, --read            Read from flash and store in local file.
-  -l LENGTH, --length LENGTH
-                        Length of read or erase.
-  -p PORT, --port PORT  Serial port (default: $STM32LOADER_SERIAL_PORT).
-  -b BAUD, --baud BAUD  Baudrate. (default: 115200)
-  -a ADDRESS, --address ADDRESS
-                        Target address for read, write or erase. (default: 134217728)
-  -g ADDRESS, --go-address ADDRESS
+  -l, --length LENGTH   Length of read or erase. For write and verify, use
+                        only this many bytes of the file.
+  -p, --port PORT       Serial port (default: $STM32LOADER_SERIAL_PORT).
+  -b, --baud BAUD       Baudrate. (default: 115200)
+  -a, --address ADDRESS
+                        Target address for read or write. For erase, this is
+                        used when you supply --length. Default: the start of
+                        flash memory.
+  -o, --offset OFFSET   Alternative to --address: an offset from the start of
+                        flash memory.
+  -g, --go-address ADDRESS
                         Start executing from address (0x08000000, usually).
-  -f FAMILY, --family FAMILY
-                        Device family to read out device UID and flash size; e.g F1 for STM32F1xx. Possible values: F0,
-                        F1, F3, F4, F7, H7, L4, L0, G0, NRG. (default: $STM32LOADER_FAMILY).
+  -f, --family FAMILY   Device family to read out device UID and flash size;
+                        e.g F1 for STM32F1xx. Possible values: C0, F0, F1, F2,
+                        F3, F4, F7, G0, G4, H5, H7, L0, L1, L4, L5, WBA, WB0,
+                        WB, WL, U5, W, NRG, WIZ, GD32VW55X (default:
+                        $STM32LOADER_FAMILY).
   -V, --verbose         Verbose mode.
   -q, --quiet           Quiet mode.
   -s, --swap-rts-dtr    Swap RTS and DTR: use RTS for reset and DTR for boot0.
@@ -78,8 +101,9 @@ options:
   -B, --boot0-active-low
                         Make BOOT0 active low.
   -n, --no-progress     Don't show progress bar.
-  -P {even,none}, --parity {even,none}
-                        Parity: "even" for STM32, "none" for BlueNRG. (default: even)
+  -P, --parity {even,none}
+                        Parity: "even" for STM32, "none" for BlueNRG.
+                        (default: even)
   --version             show program's version number and exit
 
 examples:
@@ -97,6 +121,16 @@ stm32loader --port /dev/tty.usbserial-ftCYPMYJ --erase --write --verify somefile
 This will pre-erase flash, write `somefile.bin` to the flash on the device, and then
 perform a verification after writing is finished.
 
+To erase only the flash pages that the new data will occupy, use `--auto-erase`
+instead of `--erase`:
+
+```
+stm32loader --port /dev/tty.usbserial-ftCYPMYJ --auto-erase --write --verify somefile.bin
+```
+
+The erased range is rounded out to whole pages (sectors), following the device's
+flash layout. This also works on devices with mixed sector sizes.
+
 You can skip the `--port` option by configuring environment variable
 `STM32LOADER_SERIAL_PORT`.
 Similarly, `--family` may be supplied through `STM32LOADER_FAMILY`.
@@ -187,12 +221,6 @@ adapter (it needs to toggle, whereas `BOOT0` does not).
 
 ## Not currently supported
 
-* Command-line argument for write protection/unprotection.
+* Command-line argument for write protection for some devices (e.g. those with dual-bank flash).
 * STM8 devices (ST `UM0560`).
 * Other bootloader protocols (e.g. I2C, HEX -> implemented in `stm32flash`).
-
-
-## Future work
-
-* Use f-strings.
-* Use proper logging instead of print statements.

stm32loader-1.0.0.dev2/pyproject.toml

@@ -0,0 +1,149 @@
+[project]
+name = "stm32loader"
+description = "Flash firmware to STM32 microcontrollers using Python."
+version = "1.0.0-dev2"
+readme = "README.md"
+requires-python = ">=3.9"
+license = "GPL-3.0-or-later"
+license-files = ["LICENSE"]
+classifiers = [
+    "Programming Language :: Python",
+    "Programming Language :: Python :: 3",
+    "Programming Language :: Python :: 3.9",
+    "Programming Language :: Python :: 3.10",
+    "Programming Language :: Python :: 3.11",
+    "Programming Language :: Python :: 3.12",
+    "Programming Language :: Python :: 3.13",
+    "Programming Language :: Python :: 3.14",
+    "Programming Language :: Python :: 3.15",
+    "Programming Language :: Python :: Implementation :: CPython",
+    "Programming Language :: Python :: Implementation :: PyPy",
+    "Natural Language :: English",
+    "Operating System :: OS Independent",
+]
+dependencies = [
+    "pyserial",
+    "progress",
+]
+
+[[project.authors]]
+name = "jsnyder"
+
+[[project.authors]]
+name = "Floris Lambrechts"
+email = "florisla@gmail.com"
+
+[project.optional-dependencies]
+hex = ["intelhex"]
+dev = [
+    "intelhex",
+    "pytest",
+    "nox>=2026.2.9",
+    "nox-uv>=0.7.1",
+    "ruff",
+    "pylint",
+    "bump-my-version",
+    "cogapp",
+]
+
+[project.scripts]
+stm32loader = "stm32loader.__main__:main"
+
+[project.urls]
+Home = "https://github.com/florisla/stm32loader"
+BugTracker = "https://github.com/florisla/stm32loader/issues"
+SourceCode = "https://github.com/florisla/stm32loader"
+
+[build-system]
+requires = ["uv_build>=0.13.5,<0.14.0"]
+build-backend = "uv_build"
+
+[dependency-groups]
+hex = ["intelhex"]
+lint = [
+    "ruff",
+    "pylint",
+]
+test = [
+    "pytest",
+    "intelhex",
+    "nox>=2026.2.9",
+    "nox-uv>=0.7.1",
+]
+release = [
+    "bump-my-version",
+    "cogapp",
+]
+
+[tool.uv]
+default-groups = [
+    "test",
+    "hex",
+    "lint",
+    "release",
+]
+
+[tool.bumpversion]
+commit = true
+tag = true
+message = "release: Bump version number from v{current_version} to v{new_version}"
+parse = '(?P<major>\d+)\.(?P<minor>\d+)\.(?P<patch>\d+)(-(?P<release>[^\d]+)(?P<devrelease>\d+))?'
+serialize = [
+    "{major}.{minor}.{patch}-{release}{devrelease}",
+    "{major}.{minor}.{patch}",
+]
+
+[tool.bumpversion.parts.release]
+optional_value = "release"
+values = [
+    "dev",
+    "release",
+]
+
+[[tool.bumpversion.files]]
+filename = "src/stm32loader/__init__.py"
+parse = '\((?P<major>\d+),\s(?P<minor>\d+),\s(?P<patch>\d+)(\s*,\s*"(?P<release>[^"]+)"\s*,\s*(?P<devrelease>\d+))?\)'
+serialize = [
+    '({major}, {minor}, {patch}, "{release}", {devrelease})',
+    "({major}, {minor}, {patch})",
+]
+search = "__version_info__ = {current_version}"
+replace = "__version_info__ = {new_version}"
+
+[[tool.bumpversion.files]]
+filename = "src/stm32loader/__init__.py"
+search = '__version__ = "{current_version}"'
+replace = '__version__ = "{new_version}"'
+
+[tool.ruff]
+line-length = 98
+target-version = "py39"
+exclude = [
+    ".git",
+    ".idea",
+    "__pycache__",
+    "build",
+    "dist",
+    "*.egg-info",
+]
+
+[tool.ruff.lint]
+select = [
+    "E",
+    "F",
+    "W",
+    "I",
+]
+
+[tool.ruff.lint.pycodestyle]
+max-doc-length = 78
+
+[tool.ruff.format]
+docstring-code-format = true
+
+[tool.pytest.ini_options]
+addopts = "--strict-markers -m 'not (hardware or missing_hardware)'"
+markers = [
+    "hardware",
+    "missing_hardware",
+]

stm32loader-0.7.0/pyproject.toml → stm32loader-1.0.0.dev2/pyproject.toml.orig

@@ -1,48 +1,70 @@
-[build-system]
-requires = ["flit_core >=3.2,<4"]
-build-backend = "flit_core.buildapi"
-
 [project]
 name = "stm32loader"
+description = "Flash firmware to STM32 microcontrollers using Python."
+version = "1.0.0-dev2"
+readme = "README.md"
 authors = [
     {name = "jsnyder"},
     {name = "Floris Lambrechts", email = "florisla@gmail.com"},
 ]
-readme = "README.md"
-description = "Flash firmware to STM32 microcontrollers using Python."
-license = {file = "LICENSE"}
 requires-python = ">=3.9"
-dependencies = [
-    "pyserial",
-    "progress",
-]
+license = "GPL-3.0-or-later"
+license-files = ["LICENSE"]
 classifiers = [
-    "License :: OSI Approved :: GNU General Public License v3 or later (GPLv3+)",
     "Programming Language :: Python",
     "Programming Language :: Python :: 3",
     "Programming Language :: Python :: 3.9",
     "Programming Language :: Python :: 3.10",
     "Programming Language :: Python :: 3.11",
+    "Programming Language :: Python :: 3.12",
+    "Programming Language :: Python :: 3.13",
+    "Programming Language :: Python :: 3.14",
+    "Programming Language :: Python :: 3.15",
     "Programming Language :: Python :: Implementation :: CPython",
     "Programming Language :: Python :: Implementation :: PyPy",
     "Natural Language :: English",
     "Operating System :: OS Independent",
 ]
-dynamic = ["version"]
+dependencies = [
+    "pyserial",
+    "progress",
+]
 
 [project.optional-dependencies]
 hex = [
     "intelhex",
 ]
 dev = [
-    "wheel",
-    "twine",
+    "intelhex",
+    "pytest",
+    "nox>=2026.2.9",
+    "nox-uv>=0.7.1",
+    "ruff",
     "pylint",
-    "flake8",
-    "flake8-isort",
-    "black",
     "bump-my-version",
-    "nox",
+    "cogapp",
+]
+
+[build-system]
+requires = ["uv_build>=0.13.5,<0.14.0"]
+build-backend = "uv_build"
+
+[dependency-groups]
+hex = [
+    "intelhex",
+]
+lint = [
+    "ruff",
+    "pylint",
+]
+test = [
+    "pytest",
+    "intelhex",
+    "nox>=2026.2.9",
+    "nox-uv>=0.7.1",
+]
+release = [
+    "bump-my-version",
     "cogapp",
 ]
 
@@ -55,8 +77,11 @@ BugTracker = "https://github.com/florisla/stm32loader/issues"
 SourceCode = "https://github.com/florisla/stm32loader"
 
 
+[tool.uv]
+default-groups = ["test", "hex", "lint", "release"]
+
+
 [tool.bumpversion]
-current_version = "0.7.0"
 commit = true
 tag = true
 message = "release: Bump version number from v{current_version} to v{new_version}"
@@ -74,7 +99,7 @@ values = [
 ]
 
 [[tool.bumpversion.files]]
-filename = "stm32loader/__init__.py"
+filename = "src/stm32loader/__init__.py"
 parse = "\\((?P<major>\\d+),\\s(?P<minor>\\d+),\\s(?P<patch>\\d+)(\\s*,\\s*\"(?P<release>[^\"]+)\"\\s*,\\s*(?P<devrelease>\\d+))?\\)"
 serialize = [
     "({major}, {minor}, {patch}, \"{release}\", {devrelease})",
@@ -83,34 +108,39 @@ serialize = [
 search = "__version_info__ = {current_version}"
 replace = "__version_info__ = {new_version}"
 
+[[tool.bumpversion.files]]
+filename = "src/stm32loader/__init__.py"
+search = "__version__ = \"{current_version}\""
+replace = "__version__ = \"{new_version}\""
 
-[tool.black]
+
+[tool.ruff]
 line-length = 98
-target-version = [
-    "py39",
-    "py310",
-    "py311",
+target-version = "py39"
+exclude = [
+    ".git",
+    ".idea",
+    "__pycache__",
+    "build",
+    "dist",
+    "*.egg-info",
 ]
-exclude = '''
-/(
-    \.git
-  | \.idea
-  | __pycache__
-  | build
-  | dist
-  | .*\.egg-info
-)/
-'''
+
+[tool.ruff.lint]
+# E/W: pycodestyle, F: pyflakes, I: isort
+# Replaces flake8 + flake8-isort; ruff format replaces black
+select = ["E", "F", "W", "I"]
+
+[tool.ruff.lint.pycodestyle]
+max-doc-length = 78
+
+[tool.ruff.format]
+docstring-code-format = true
 
 
 [tool.pytest.ini_options]
-addopts = "--strict-markers -m 'not (hardware or hardware_missing)'"
+addopts = "--strict-markers -m 'not (hardware or missing_hardware)'"
 markers = [
     "hardware",
     "missing_hardware",
 ]
-
-
-[tool.isort]
-line_length = 98
-multi_line_output = 2

stm32loader-1.0.0.dev2/src/stm32loader/__init__.py

@@ -0,0 +1,8 @@
+"""Flash firmware to STM32 microcontrollers over a serial connection."""
+
+import logging
+
+logging.getLogger(__name__).addHandler(logging.NullHandler())
+
+__version_info__ = (1, 0, 0, "dev", 1)
+__version__ = "1.0.0-dev1"