snaptrade-python-sdk 13.0.23__tar.gz → 13.0.25__tar.gz

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: snaptrade-python-sdk
-Version: 13.0.23
+Version: 13.0.25
 Summary: Client for SnapTrade
 License: MIT
 Author: SnapTrade
@@ -87,7 +87,7 @@ See https://docs.snaptrade.com/docs/ratelimiting.
 
 
 
-[![PyPI](https://img.shields.io/badge/PyPI-v13.0.23-blue)](https://pypi.org/project/snaptrade-python-sdk/13.0.23)
+[![PyPI](https://img.shields.io/badge/PyPI-v13.0.25-blue)](https://pypi.org/project/snaptrade-python-sdk/13.0.25)
 [![README.md](https://img.shields.io/badge/README-Click%20Here-green)](https://github.com/passiv/snaptrade-sdks/tree/master/sdks/python#readme)
 [![More Info](https://img.shields.io/badge/More%20Info-Click%20Here-orange)](https://snaptrade.com/)
 
@@ -170,7 +170,7 @@ Python >=3.8
 ## Installation<a id="installation"></a>
 
 ```sh
-pip install snaptrade-python-sdk==13.0.23
+pip install snaptrade-python-sdk==13.0.25
 ```
 
 ## Authentication<a id="authentication"></a>
@@ -419,7 +419,7 @@ Optional comma separated list of transaction types to filter by. SnapTrade does
 
 ### `snaptrade.account_information.get_account_balance_history`<a id="snaptradeaccount_informationget_account_balance_history"></a>
 
-An experimental endpoint that returns estimated historical total account value for the specified account. Total account value is the sum of the market value of all positions and cash in the account at a given time. This endpoint is experimental, disabled by default, and has a maximum lookback of 1 year. Enable this feature for free in the Add-on section of the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing)
+An experimental endpoint that returns estimated historical total account value for the specified account. Total account value is the sum of the market value of all positions and cash in the account at a given time. This endpoint is experimental, disabled by default, and has a maximum lookback of 1 year. Because the data is dynamically generated, we recommend replacing your dataset with each request as opposed to combining data from multiple requests. Enable this feature for free in the Add-on section of the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing)
 
 
 #### 🛠️ Usage<a id="🛠️-usage"></a>
@@ -475,7 +475,7 @@ The client identifies the user in this mode. Do not pass `user_id` `user_secret`
 
 Returns a list of all positions in the specified account.
 
-The `results` list can contain multiple instrument types in the same response, including stocks, ADRs, ETFs, mutual funds, closed-end funds, bonds, crypto, futures, option positions, future option positions, and CFD positions. Use the `instrument.kind` discriminator to determine the schema for each position's `instrument`.
+The `results` list can contain multiple instrument types in the same response, including stocks, ADRs, ETFs, mutual funds, closed-end funds, bonds, crypto, futures, option positions, future option positions, CFD positions, and tokenized asset positions. Use the `instrument.kind` discriminator to determine the schema for each position's `instrument`.
 
 **Beta:** future option positions (`instrument.kind: future_option`) are in beta. They are currently returned only for tastytrade and Interactive Brokers connections, and only for partners they have been enabled for — please contact the SnapTrade team to enable them. The `FutureOptionInstrument` schema may change.
 

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/README.md

@@ -64,7 +64,7 @@ See https://docs.snaptrade.com/docs/ratelimiting.
 
 
 
-[![PyPI](https://img.shields.io/badge/PyPI-v13.0.23-blue)](https://pypi.org/project/snaptrade-python-sdk/13.0.23)
+[![PyPI](https://img.shields.io/badge/PyPI-v13.0.25-blue)](https://pypi.org/project/snaptrade-python-sdk/13.0.25)
 [![README.md](https://img.shields.io/badge/README-Click%20Here-green)](https://github.com/passiv/snaptrade-sdks/tree/master/sdks/python#readme)
 [![More Info](https://img.shields.io/badge/More%20Info-Click%20Here-orange)](https://snaptrade.com/)
 
@@ -147,7 +147,7 @@ Python >=3.8
 ## Installation<a id="installation"></a>
 
 ```sh
-pip install snaptrade-python-sdk==13.0.23
+pip install snaptrade-python-sdk==13.0.25
 ```
 
 ## Authentication<a id="authentication"></a>
@@ -396,7 +396,7 @@ Optional comma separated list of transaction types to filter by. SnapTrade does
 
 ### `snaptrade.account_information.get_account_balance_history`<a id="snaptradeaccount_informationget_account_balance_history"></a>
 
-An experimental endpoint that returns estimated historical total account value for the specified account. Total account value is the sum of the market value of all positions and cash in the account at a given time. This endpoint is experimental, disabled by default, and has a maximum lookback of 1 year. Enable this feature for free in the Add-on section of the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing)
+An experimental endpoint that returns estimated historical total account value for the specified account. Total account value is the sum of the market value of all positions and cash in the account at a given time. This endpoint is experimental, disabled by default, and has a maximum lookback of 1 year. Because the data is dynamically generated, we recommend replacing your dataset with each request as opposed to combining data from multiple requests. Enable this feature for free in the Add-on section of the [Customer Dashboard billing page](https://dashboard.snaptrade.com/settings/billing)
 
 
 #### 🛠️ Usage<a id="🛠️-usage"></a>
@@ -452,7 +452,7 @@ The client identifies the user in this mode. Do not pass `user_id` `user_secret`
 
 Returns a list of all positions in the specified account.
 
-The `results` list can contain multiple instrument types in the same response, including stocks, ADRs, ETFs, mutual funds, closed-end funds, bonds, crypto, futures, option positions, future option positions, and CFD positions. Use the `instrument.kind` discriminator to determine the schema for each position's `instrument`.
+The `results` list can contain multiple instrument types in the same response, including stocks, ADRs, ETFs, mutual funds, closed-end funds, bonds, crypto, futures, option positions, future option positions, CFD positions, and tokenized asset positions. Use the `instrument.kind` discriminator to determine the schema for each position's `instrument`.
 
 **Beta:** future option positions (`instrument.kind: future_option`) are in beta. They are currently returned only for tastytrade and Interactive Brokers connections, and only for partners they have been enabled for — please contact the SnapTrade team to enable them. The `FutureOptionInstrument` schema may change.
 

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/pyproject.toml

@@ -1,6 +1,6 @@
 [tool.poetry]
 name = "snaptrade-python-sdk"
-version = "13.0.23"
+version = "13.0.25"
 description = "Client for SnapTrade"
 authors = ["SnapTrade <api@snaptrade.com>"]
 license = "MIT"

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/snaptrade_client/__init__.py

@@ -12,7 +12,7 @@
     Created by: https://snaptrade.com/
 """
 
-__version__ = "13.0.23"
+__version__ = "13.0.25"
 
 # import ApiClient
 from snaptrade_client.api_client import ApiClient

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/snaptrade_client/api_client.py

@@ -1175,7 +1175,7 @@ class ApiClient(typing.Generic[TAuth]):
             self.default_headers[header_name] = header_value
         self.cookie = cookie
         # Set default User-Agent.
-        self.user_agent = 'Konfig/13.0.23/python'
+        self.user_agent = 'Konfig/13.0.25/python'
 
     def __enter__(self):
         return self

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/snaptrade_client/configuration.py

@@ -519,7 +519,7 @@ conf = snaptrade_client.Configuration(
                "OS: {env}\n"\
                "Python Version: {pyversion}\n"\
                "Version of the API: 1.0.0\n"\
-               "SDK Package Version: 13.0.23".\
+               "SDK Package Version: 13.0.25".\
                format(env=sys.platform, pyversion=sys.version)
 
     def get_host_settings(self):

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/snaptrade_client/model/instrument.py

@@ -51,6 +51,7 @@ class Instrument(
                     'OptionInstrument': OptionInstrument,
                     'OtherInstrument': OtherInstrument,
                     'StockInstrument': StockInstrument,
+                    'TokenizedAssetInstrument': TokenizedAssetInstrument,
                     'adr': AdrInstrument,
                     'bond': OtherInstrument,
                     'cef': CefInstrument,
@@ -63,6 +64,7 @@ class Instrument(
                     'option': OptionInstrument,
                     'other': OtherInstrument,
                     'stock': StockInstrument,
+                    'tokenized_asset': TokenizedAssetInstrument,
                 }
             }
         
@@ -88,6 +90,7 @@ class Instrument(
                 AdrInstrument,
                 CfdInstrument,
                 OtherInstrument,
+                TokenizedAssetInstrument,
             ]
 
 
@@ -115,3 +118,4 @@ from snaptrade_client.model.mutual_fund_instrument import MutualFundInstrument
 from snaptrade_client.model.option_instrument import OptionInstrument
 from snaptrade_client.model.other_instrument import OtherInstrument
 from snaptrade_client.model.stock_instrument import StockInstrument
+from snaptrade_client.model.tokenized_asset_instrument import TokenizedAssetInstrument

{snaptrade_python_sdk-13.0.23 → snaptrade_python_sdk-13.0.25}/snaptrade_client/model/instrument.pyi

@@ -51,6 +51,7 @@ class Instrument(
                     'OptionInstrument': OptionInstrument,
                     'OtherInstrument': OtherInstrument,
                     'StockInstrument': StockInstrument,
+                    'TokenizedAssetInstrument': TokenizedAssetInstrument,
                     'adr': AdrInstrument,
                     'bond': OtherInstrument,
                     'cef': CefInstrument,
@@ -63,6 +64,7 @@ class Instrument(
                     'option': OptionInstrument,
                     'other': OtherInstrument,
                     'stock': StockInstrument,
+                    'tokenized_asset': TokenizedAssetInstrument,
                 }
             }
         
@@ -88,6 +90,7 @@ class Instrument(
                 AdrInstrument,
                 CfdInstrument,
                 OtherInstrument,
+                TokenizedAssetInstrument,
             ]
 
 
@@ -115,3 +118,4 @@ from snaptrade_client.model.mutual_fund_instrument import MutualFundInstrument
 from snaptrade_client.model.option_instrument import OptionInstrument
 from snaptrade_client.model.other_instrument import OtherInstrument
 from snaptrade_client.model.stock_instrument import StockInstrument
+from snaptrade_client.model.tokenized_asset_instrument import TokenizedAssetInstrument

snaptrade_python_sdk-13.0.25/snaptrade_client/model/tokenized_asset_instrument.py

@@ -0,0 +1,153 @@
+# coding: utf-8
+
+"""
+    SnapTrade
+
+    Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+    The version of the OpenAPI document: 1.0.0
+    Contact: api@snaptrade.com
+    Created by: https://snaptrade.com/
+"""
+
+from datetime import date, datetime  # noqa: F401
+import decimal  # noqa: F401
+import functools  # noqa: F401
+import io  # noqa: F401
+import re  # noqa: F401
+import typing  # noqa: F401
+import typing_extensions  # noqa: F401
+import uuid  # noqa: F401
+
+import frozendict  # noqa: F401
+
+from snaptrade_client import schemas  # noqa: F401
+
+
+class TokenizedAssetInstrument(
+    schemas.DictSchema
+):
+    """
+    This class is auto generated by Konfig (https://konfigthis.com)
+
+    Canonical tokenized asset wrapper for a V2 position. Symbol and description
+duplicate the listed underlying's display metadata for convenience; they
+are not token-specific identifiers or labels. Currency and exchange metadata
+are provided only in underlying_instrument.
+
+    """
+
+
+    class MetaOapg:
+        required = {
+            "symbol",
+            "underlying_instrument",
+            "kind",
+            "id",
+        }
+        
+        class properties:
+            
+            
+            class kind(
+                schemas.EnumBase,
+                schemas.StrSchema
+            ):
+            
+            
+                class MetaOapg:
+                    enum_value_to_name = {
+                        "tokenized_asset": "TOKENIZED_ASSET",
+                    }
+                
+                @schemas.classproperty
+                def TOKENIZED_ASSET(cls):
+                    return cls("tokenized_asset")
+            id = schemas.UUIDSchema
+            symbol = schemas.StrSchema
+        
+            @staticmethod
+            def underlying_instrument() -> typing.Type['UnderlyingTokenizedAssetInstrument']:
+                return UnderlyingTokenizedAssetInstrument
+            description = schemas.StrSchema
+            __annotations__ = {
+                "kind": kind,
+                "id": id,
+                "symbol": symbol,
+                "underlying_instrument": underlying_instrument,
+                "description": description,
+            }
+        additional_properties = schemas.AnyTypeSchema
+    
+    symbol: MetaOapg.properties.symbol
+    underlying_instrument: 'UnderlyingTokenizedAssetInstrument'
+    kind: MetaOapg.properties.kind
+    id: MetaOapg.properties.id
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["symbol"]) -> MetaOapg.properties.symbol: ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["underlying_instrument"]) -> 'UnderlyingTokenizedAssetInstrument': ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["kind"]) -> MetaOapg.properties.kind: ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["id"]) -> MetaOapg.properties.id: ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["description"]) -> MetaOapg.properties.description: ...
+    
+    @typing.overload
+    def __getitem__(self, name: str) -> MetaOapg.additional_properties: ...
+    
+    def __getitem__(self, name: typing.Union[typing_extensions.Literal["symbol"], typing_extensions.Literal["underlying_instrument"], typing_extensions.Literal["kind"], typing_extensions.Literal["id"], typing_extensions.Literal["description"], str, ]):
+        # dict_instance[name] accessor
+        return super().__getitem__(name)
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["symbol"]) -> MetaOapg.properties.symbol: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["underlying_instrument"]) -> 'UnderlyingTokenizedAssetInstrument': ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["kind"]) -> MetaOapg.properties.kind: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["id"]) -> MetaOapg.properties.id: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["description"]) -> typing.Union[MetaOapg.properties.description, schemas.Unset]: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: str) -> typing.Union[MetaOapg.additional_properties, schemas.Unset]: ...
+    
+    def get_item_oapg(self, name: typing.Union[typing_extensions.Literal["symbol"], typing_extensions.Literal["underlying_instrument"], typing_extensions.Literal["kind"], typing_extensions.Literal["id"], typing_extensions.Literal["description"], str, ]):
+        return super().get_item_oapg(name)
+
+    def __new__(
+        cls,
+        *args: typing.Union[dict, frozendict.frozendict, ],
+        symbol: typing.Union[MetaOapg.properties.symbol, str, ],
+        underlying_instrument: 'UnderlyingTokenizedAssetInstrument',
+        kind: typing.Union[MetaOapg.properties.kind, str, ],
+        id: typing.Union[MetaOapg.properties.id, str, uuid.UUID, ],
+        description: typing.Union[MetaOapg.properties.description, str, schemas.Unset] = schemas.unset,
+        _configuration: typing.Optional[schemas.Configuration] = None,
+        **kwargs: typing.Union[MetaOapg.additional_properties, dict, frozendict.frozendict, str, date, datetime, uuid.UUID, int, float, decimal.Decimal, bool, None, list, tuple, bytes, io.FileIO, io.BufferedReader, ],
+    ) -> 'TokenizedAssetInstrument':
+        return super().__new__(
+            cls,
+            *args,
+            symbol=symbol,
+            underlying_instrument=underlying_instrument,
+            kind=kind,
+            id=id,
+            description=description,
+            _configuration=_configuration,
+            **kwargs,
+        )
+
+from snaptrade_client.model.underlying_tokenized_asset_instrument import UnderlyingTokenizedAssetInstrument

snaptrade_python_sdk-13.0.25/snaptrade_client/model/tokenized_asset_instrument.pyi

@@ -0,0 +1,147 @@
+# coding: utf-8
+
+"""
+    SnapTrade
+
+    Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+    The version of the OpenAPI document: 1.0.0
+    Contact: api@snaptrade.com
+    Created by: https://snaptrade.com/
+"""
+
+from datetime import date, datetime  # noqa: F401
+import decimal  # noqa: F401
+import functools  # noqa: F401
+import io  # noqa: F401
+import re  # noqa: F401
+import typing  # noqa: F401
+import typing_extensions  # noqa: F401
+import uuid  # noqa: F401
+
+import frozendict  # noqa: F401
+
+from snaptrade_client import schemas  # noqa: F401
+
+
+class TokenizedAssetInstrument(
+    schemas.DictSchema
+):
+    """
+    This class is auto generated by Konfig (https://konfigthis.com)
+
+    Canonical tokenized asset wrapper for a V2 position. Symbol and description
+duplicate the listed underlying's display metadata for convenience; they
+are not token-specific identifiers or labels. Currency and exchange metadata
+are provided only in underlying_instrument.
+
+    """
+
+
+    class MetaOapg:
+        required = {
+            "symbol",
+            "underlying_instrument",
+            "kind",
+            "id",
+        }
+        
+        class properties:
+            
+            
+            class kind(
+                schemas.EnumBase,
+                schemas.StrSchema
+            ):
+                
+                @schemas.classproperty
+                def TOKENIZED_ASSET(cls):
+                    return cls("tokenized_asset")
+            id = schemas.UUIDSchema
+            symbol = schemas.StrSchema
+        
+            @staticmethod
+            def underlying_instrument() -> typing.Type['UnderlyingTokenizedAssetInstrument']:
+                return UnderlyingTokenizedAssetInstrument
+            description = schemas.StrSchema
+            __annotations__ = {
+                "kind": kind,
+                "id": id,
+                "symbol": symbol,
+                "underlying_instrument": underlying_instrument,
+                "description": description,
+            }
+        additional_properties = schemas.AnyTypeSchema
+    
+    symbol: MetaOapg.properties.symbol
+    underlying_instrument: 'UnderlyingTokenizedAssetInstrument'
+    kind: MetaOapg.properties.kind
+    id: MetaOapg.properties.id
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["symbol"]) -> MetaOapg.properties.symbol: ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["underlying_instrument"]) -> 'UnderlyingTokenizedAssetInstrument': ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["kind"]) -> MetaOapg.properties.kind: ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["id"]) -> MetaOapg.properties.id: ...
+    
+    @typing.overload
+    def __getitem__(self, name: typing_extensions.Literal["description"]) -> MetaOapg.properties.description: ...
+    
+    @typing.overload
+    def __getitem__(self, name: str) -> MetaOapg.additional_properties: ...
+    
+    def __getitem__(self, name: typing.Union[typing_extensions.Literal["symbol"], typing_extensions.Literal["underlying_instrument"], typing_extensions.Literal["kind"], typing_extensions.Literal["id"], typing_extensions.Literal["description"], str, ]):
+        # dict_instance[name] accessor
+        return super().__getitem__(name)
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["symbol"]) -> MetaOapg.properties.symbol: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["underlying_instrument"]) -> 'UnderlyingTokenizedAssetInstrument': ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["kind"]) -> MetaOapg.properties.kind: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["id"]) -> MetaOapg.properties.id: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: typing_extensions.Literal["description"]) -> typing.Union[MetaOapg.properties.description, schemas.Unset]: ...
+    
+    @typing.overload
+    def get_item_oapg(self, name: str) -> typing.Union[MetaOapg.additional_properties, schemas.Unset]: ...
+    
+    def get_item_oapg(self, name: typing.Union[typing_extensions.Literal["symbol"], typing_extensions.Literal["underlying_instrument"], typing_extensions.Literal["kind"], typing_extensions.Literal["id"], typing_extensions.Literal["description"], str, ]):
+        return super().get_item_oapg(name)
+
+    def __new__(
+        cls,
+        *args: typing.Union[dict, frozendict.frozendict, ],
+        symbol: typing.Union[MetaOapg.properties.symbol, str, ],
+        underlying_instrument: 'UnderlyingTokenizedAssetInstrument',
+        kind: typing.Union[MetaOapg.properties.kind, str, ],
+        id: typing.Union[MetaOapg.properties.id, str, uuid.UUID, ],
+        description: typing.Union[MetaOapg.properties.description, str, schemas.Unset] = schemas.unset,
+        _configuration: typing.Optional[schemas.Configuration] = None,
+        **kwargs: typing.Union[MetaOapg.additional_properties, dict, frozendict.frozendict, str, date, datetime, uuid.UUID, int, float, decimal.Decimal, bool, None, list, tuple, bytes, io.FileIO, io.BufferedReader, ],
+    ) -> 'TokenizedAssetInstrument':
+        return super().__new__(
+            cls,
+            *args,
+            symbol=symbol,
+            underlying_instrument=underlying_instrument,
+            kind=kind,
+            id=id,
+            description=description,
+            _configuration=_configuration,
+            **kwargs,
+        )
+
+from snaptrade_client.model.underlying_tokenized_asset_instrument import UnderlyingTokenizedAssetInstrument

snaptrade_python_sdk-13.0.25/snaptrade_client/model/underlying_tokenized_asset_instrument.py

@@ -0,0 +1,80 @@
+# coding: utf-8
+
+"""
+    SnapTrade
+
+    Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+    The version of the OpenAPI document: 1.0.0
+    Contact: api@snaptrade.com
+    Created by: https://snaptrade.com/
+"""
+
+from datetime import date, datetime  # noqa: F401
+import decimal  # noqa: F401
+import functools  # noqa: F401
+import io  # noqa: F401
+import re  # noqa: F401
+import typing  # noqa: F401
+import typing_extensions  # noqa: F401
+import uuid  # noqa: F401
+
+import frozendict  # noqa: F401
+
+from snaptrade_client import schemas  # noqa: F401
+
+
+class UnderlyingTokenizedAssetInstrument(
+    schemas.ComposedSchema,
+):
+    """
+    This class is auto generated by Konfig (https://konfigthis.com)
+
+    The listed stock or ETF underlying a tokenized asset.
+    """
+
+
+    class MetaOapg:
+        
+        @staticmethod
+        def discriminator():
+            return {
+                'kind': {
+                    'EtfInstrument': EtfInstrument,
+                    'StockInstrument': StockInstrument,
+                    'etf': EtfInstrument,
+                    'stock': StockInstrument,
+                }
+            }
+        
+        @classmethod
+        @functools.lru_cache()
+        def one_of(cls):
+            # we need this here to make our import statements work
+            # we must store _composed_schemas in here so the code is only run
+            # when we invoke this method. If we kept this at the class
+            # level we would get an error because the class level
+            # code would be run when this module is imported, and these composed
+            # classes don't exist yet because their module has not finished
+            # loading
+            return [
+                StockInstrument,
+                EtfInstrument,
+            ]
+
+
+    def __new__(
+        cls,
+        *args: typing.Union[dict, frozendict.frozendict, str, date, datetime, uuid.UUID, int, float, decimal.Decimal, bool, None, list, tuple, bytes, io.FileIO, io.BufferedReader, ],
+        _configuration: typing.Optional[schemas.Configuration] = None,
+        **kwargs: typing.Union[schemas.AnyTypeSchema, dict, frozendict.frozendict, str, date, datetime, uuid.UUID, int, float, decimal.Decimal, None, list, tuple, bytes],
+    ) -> 'UnderlyingTokenizedAssetInstrument':
+        return super().__new__(
+            cls,
+            *args,
+            _configuration=_configuration,
+            **kwargs,
+        )
+
+from snaptrade_client.model.etf_instrument import EtfInstrument
+from snaptrade_client.model.stock_instrument import StockInstrument

snaptrade_python_sdk-13.0.25/snaptrade_client/model/underlying_tokenized_asset_instrument.pyi

@@ -0,0 +1,80 @@
+# coding: utf-8
+
+"""
+    SnapTrade
+
+    Connect brokerage accounts to your app for live positions and trading.  ## Rate limiting  Two limits apply to requests signed with your `clientId`. The stricter one wins, and exceeding either returns `429 Too Many Requests`.  - **Customer-level** — 250 requests/minute by default, scoped to your   `clientId` and applied across all endpoints. Reported in   `X-RateLimit-Limit`, `X-RateLimit-Remaining` and `X-RateLimit-Reset`. - **Account-level** — 10 requests/minute per account, scoped to   (`clientId`, `accountId`). All covered operations for one account draw on   the same bucket — reading balances and reading positions share it — and   enforcement does not depend on the HTTP method, so updating an account   consumes the same bucket as reading it. Only enforced for Personal users,   and only for integrations it has been rolled out to — it is not yet in   force for every Personal integration. It also does not apply on every   operation that documents a 429 below. Where it applies it is reported in   `X-RateLimit-Account-Limit`, `X-RateLimit-Account-Remaining` and   `X-RateLimit-Account-Reset`. Do not read the absence of those headers as   proof the limit is off — some configurations omit the rate limit headers   while still enforcing the limit, so header absence tells you nothing   about your allowance.  On a 429, `X-RateLimit-Remaining: 0` means you hit the customer-level limit and `X-RateLimit-Account-Remaining: 0` means the account-level one. Wait for the corresponding `*-Reset` value (seconds) before retrying, or fall back to exponential backoff with jitter.  Not every 429 is explained by those headers. A separate per-authenticated-user limit, reported in no `X-RateLimit-*` header, covers OAuth-authenticated requests and signed requests in configurations where the customer-level limit is not in effect — on the operations that use the default throttles. A few operations override those and are governed by the customer-level limit alone. The two do not stack: a signed request governed by the customer-level limit above is not additionally subject to the per-user one. If a 429 arrives with no header at zero — or with no `X-RateLimit-*` headers at all — honour `Retry-After` and back off. Treat the remaining counts as a hint, not a guarantee that the next request will succeed.  Because the customer-level limit applies everywhere, any signed request can return 429.  **OAuth-authenticated requests are an exception.** They are not subject to the customer-level limit and do not receive `X-RateLimit-Limit`, `X-RateLimit-Remaining` or `X-RateLimit-Reset` — do not wait on those headers or design around a customer-level allowance on this path. The account-level limit still applies to them on the account-data endpoints above, reported in the `X-RateLimit-Account-*` headers. On operations using the default throttles the per-user limit above applies to them as well, so an OAuth request can be rejected while the account headers still show capacity; on the few operations that override those throttles, OAuth callers have no per-user ceiling at all. Drive retries from `Retry-After` and exponential backoff with jitter rather than from the headers.  See https://docs.snaptrade.com/docs/ratelimiting. 
+
+    The version of the OpenAPI document: 1.0.0
+    Contact: api@snaptrade.com
+    Created by: https://snaptrade.com/
+"""
+
+from datetime import date, datetime  # noqa: F401
+import decimal  # noqa: F401
+import functools  # noqa: F401
+import io  # noqa: F401
+import re  # noqa: F401
+import typing  # noqa: F401
+import typing_extensions  # noqa: F401
+import uuid  # noqa: F401
+
+import frozendict  # noqa: F401
+
+from snaptrade_client import schemas  # noqa: F401
+
+
+class UnderlyingTokenizedAssetInstrument(
+    schemas.ComposedSchema,
+):
+    """
+    This class is auto generated by Konfig (https://konfigthis.com)
+
+    The listed stock or ETF underlying a tokenized asset.
+    """
+
+
+    class MetaOapg:
+        
+        @staticmethod
+        def discriminator():
+            return {
+                'kind': {
+                    'EtfInstrument': EtfInstrument,
+                    'StockInstrument': StockInstrument,
+                    'etf': EtfInstrument,
+                    'stock': StockInstrument,
+                }
+            }
+        
+        @classmethod
+        @functools.lru_cache()
+        def one_of(cls):
+            # we need this here to make our import statements work
+            # we must store _composed_schemas in here so the code is only run
+            # when we invoke this method. If we kept this at the class
+            # level we would get an error because the class level
+            # code would be run when this module is imported, and these composed
+            # classes don't exist yet because their module has not finished
+            # loading
+            return [
+                StockInstrument,
+                EtfInstrument,
+            ]
+
+
+    def __new__(
+        cls,
+        *args: typing.Union[dict, frozendict.frozendict, str, date, datetime, uuid.UUID, int, float, decimal.Decimal, bool, None, list, tuple, bytes, io.FileIO, io.BufferedReader, ],
+        _configuration: typing.Optional[schemas.Configuration] = None,
+        **kwargs: typing.Union[schemas.AnyTypeSchema, dict, frozendict.frozendict, str, date, datetime, uuid.UUID, int, float, decimal.Decimal, None, list, tuple, bytes],
+    ) -> 'UnderlyingTokenizedAssetInstrument':
+        return super().__new__(
+            cls,
+            *args,
+            _configuration=_configuration,
+            **kwargs,
+        )
+
+from snaptrade_client.model.etf_instrument import EtfInstrument
+from snaptrade_client.model.stock_instrument import StockInstrument