slick-queue-py 1.2.0__tar.gz → 2.0.0__tar.gz

{slick_queue_py-1.2.0 → slick_queue_py-2.0.0}/API_DIFFERENCES.md

@@ -1,6 +1,8 @@
 # C++ / Python API Differences
 
-This document explains the intentional API differences between the C++ `slick::SlickQueue<T>` and Python `SlickQueue` implementations.
+This document explains the intentional API differences between the C++ `slick::queue<T>` and Python `SlickQueue` implementations.
+
+Both track the same version line; this document describes slick-queue v2.0.0.
 
 ## Core Compatibility
 
@@ -17,13 +19,13 @@ Both implementations:
 **C++:**
 ```cpp
 // Create new queue in shared memory
-slick::SlickQueue<uint8_t> q(queue_size, queue_name);
+slick::queue<uint8_t> q(queue_size, queue_name);
 
 // Open existing queue
-slick::SlickQueue<uint8_t> q(queue_name);
+slick::queue<uint8_t> q(queue_name);
 
 // Local memory mode
-slick::SlickQueue<uint8_t> q(queue_size); // No shared memory
+slick::queue<uint8_t> q(queue_size); // No shared memory
 ```
 
 **Python:**
@@ -81,7 +83,89 @@ if data is not None:
 
 ---
 
-### 3. Element Access
+### 3. Feature Configuration (Traits)
+
+**C++:**
+```cpp
+// A template parameter - differently configured queues are different types
+struct my_traits : slick::queue_traits {
+    static constexpr bool enable_reset_check = true;
+    static constexpr bool enable_read_last   = false;
+};
+
+slick::queue<int, my_traits> lean(1024);
+slick::queue<int>            standard(1024);  // default_queue_traits
+```
+
+**Python:**
+```python
+# A constructor argument - the configuration is per-instance
+class MyTraits(QueueTraits):
+    enable_reset_check = True
+    enable_read_last = False
+
+lean = SlickQueue(size=1024, element_size=4, traits=MyTraits)
+standard = SlickQueue(size=1024, element_size=4)  # default_queue_traits
+```
+
+**Rationale:** Python has no templates, so the traits type is passed as a value
+rather than a template argument. The consequences differ slightly:
+
+| | C++ | Python |
+|---|---|---|
+| Malformed traits type | `queue_traits_type` concept, compile error | `validate_traits()`, `TypeError` at construction |
+| Mutating the traits after use | Impossible - `static constexpr` members | Snapshotted at construction; `q.traits` is read-only |
+| `read_last()` without `enable_read_last` | `static_assert`, compile error | `RuntimeError` at the call |
+| Traits types | Two (`queue_traits`, `debug_queue_traits`) so a debug/release mismatch fails to link | One - no translation units, so nothing for a second type to protect |
+| Default loss detection | Keyed off `NDEBUG` (Debug on, Release off) | Always on (+0.2%); not keyed off `__debug__`, which would zero `loss_count()` under `python -O` |
+| Layout when a feature is off | Its counter is dropped from the object | No object-layout effect |
+
+**Important:** `enable_read_last` is part of the *shared-memory* contract in both
+languages, and they agree byte for byte. The creator records it in the segment's
+layout marker - `'SLQ1'` when the last-published index is maintained, `'SLQ0'`
+when it is not - and every attacher matches it against its own configuration,
+raising `RuntimeError` (C++ `std::runtime_error`) on a mismatch in either
+direction. A Python `'SLQ0'` segment is therefore rejected by a C++ peer built
+with the feature on, and vice versa. The remaining traits are process-local and
+mix freely on one segment, so a Python reader with `enable_reset_check` on can
+share a segment with a C++ writer that has it off.
+
+---
+
+### 4. Lossy Reads: Pointer vs. Copy
+
+**C++:**
+```cpp
+auto [data, size] = queue.read(read_index);   // data is a T* into the ring
+process(data, size);                          // producer may overwrite as you read
+```
+
+**Python:**
+```python
+data, size, read_index = q.read(read_index)   # data is a bytes copy
+```
+
+**Rationale:** Python cannot hand out a raw pointer into the ring safely, so
+`read()` copies. This changes what "lossy" feels like, without changing the
+guarantee.
+
+Both implementations guarantee that the cursor and the returned size describe one
+and the same record - that is what the v2.0.0 seqlock validation fixed. Neither
+guarantees the *contents*: a producer writes an element's data before it publishes
+the slot's new index, so a consumer that has been lapped can read bytes the
+producer is midway through overwriting, and no check on the slot can detect it
+because the index has not changed yet.
+
+The difference is only in how visible this is. A C++ caller holds a pointer into a
+ring buffer and can see that its target is volatile. A Python caller holds what
+looks like a snapshot, but under overrun those bytes may belong to a newer record
+than the cursor names. Use `loss_count()` to detect it: a non-zero count means this
+consumer was overrun and bytes may have been overwritten in flight. If your data
+must be self-identifying, put a sequence number in the payload.
+
+---
+
+### 5. Element Access
 
 **C++:**
 ```cpp
@@ -103,12 +187,12 @@ q.publish(idx)
 
 ---
 
-### 4. Type Safety
+### 6. Type Safety
 
 **C++:**
 ```cpp
 // Template-based, compile-time type safety
-slick::SlickQueue<int32_t> q(1024, "queue");
+slick::queue<int32_t> q(1024, "queue");
 auto idx = q.reserve();
 *q[idx] = 42;  // Type-safe int32_t access
 ```
@@ -126,12 +210,12 @@ q[idx][:4] = struct.pack("<i", 42)  # Manual packing
 
 ---
 
-### 5. Resource Management
+### 7. Resource Management
 
 **C++:**
 ```cpp
 {
-    slick::SlickQueue<T> q(size, "name");
+    slick::queue<T> q(size, "name");
     // ... use queue ...
 }  // Destructor automatically cleans up
 ```
@@ -162,11 +246,11 @@ with SlickQueue(name='name', size=size, element_size=elem_size, create=True) as
 
 **C++ (producer.cpp):**
 ```cpp
-#include <slick/queue.h>
+#include <slick/queue.hpp>
 #include <cstring>
 
 int main() {
-    slick::SlickQueue<uint8_t> queue("my_queue");  // Open existing queue
+    slick::queue<uint8_t> queue("my_queue");  // Open existing queue
 
     for (int i = 0; i < 100; i++) {
         auto idx = queue.reserve();
@@ -216,12 +300,12 @@ q.close()
 
 **C++ (consumer.cpp):**
 ```cpp
-#include <slick/queue.h>
+#include <slick/queue.hpp>
 #include <iostream>
 #include <cstring>
 
 int main() {
-    slick::SlickQueue<uint8_t> queue("my_queue");  // Open existing queue
+    slick::queue<uint8_t> queue("my_queue");  // Open existing queue
 
     uint64_t read_index = 0;
     for (int i = 0; i < 100; i++) {
@@ -245,5 +329,11 @@ int main() {
 | Element access | Pointer | `memoryview` | Python memory safety |
 | Type safety | Templates | `struct` module | Language difference |
 | Cleanup | RAII (destructor) | Explicit or context manager | Python GC is non-deterministic |
+| `read()` data | `T*` into the ring | `bytes` copy | No safe raw pointers in Python |
+| Overwritten-in-flight data | Caller sees a volatile pointer | Copy may hold a newer record's bytes | Detect with `loss_count()` |
+| Feature configuration | `Traits` template parameter | `traits=` argument | Python has no templates |
+| Misconfigured traits | Compile error (concept / `static_assert`) | `TypeError` / `RuntimeError` at runtime | No compile step |
+| Default loss detection | Off in Release | Always on | +0.2% here, and the only overrun signal a caller has |
+| Layout marker | `'SLQ1'` / `'SLQ0'` | Identical, and validated against C++ peers | Shared contract |
 
 **Bottom Line:** The Python API is designed to be Pythonic while maintaining **100% binary compatibility** with C++. All atomic operations and memory layouts are identical, enabling seamless C++/Python interoperability.

slick_queue_py-2.0.0/CHANGELOG.md

@@ -0,0 +1,212 @@
+# Changelogs
+
+## [v2.0.0] - 2026-09-07
+
+Tracks C++ slick-queue v2.0.0. Feature configuration moves to a `traits`
+argument, `enable_read_last` becomes part of the shared-memory contract so a
+mismatched peer is rejected at attach time instead of degrading silently, and
+several read-path correctness bugs are fixed.
+
+### Breaking Changes
+
+- **BREAKING:** `read_last()` requires `traits.enable_read_last` and raises
+  `RuntimeError` otherwise. The legacy reserved-cursor fallback is gone with it;
+  it reported reservations that were never published and truncated sizes above
+  65,535.
+- **BREAKING:** `enable_read_last` is part of the shared-memory contract. The
+  header magic carries a feature nibble - `'SLQ1'` when the last-published index
+  is maintained, `'SLQ0'` when it is not - and every attacher matches it against
+  its own configuration, raising `RuntimeError` on a mismatch in either
+  direction. The other traits stay process-local and mix freely on one segment.
+- **BREAKING:** Segments created before slick-queue v1.4.0 carry no layout marker
+  and are rejected at attach time, rather than served by the reserved-cursor
+  fallback.
+- **BREAKING:** Reset detection is opt-in via `enable_reset_check` (default off),
+  matching C++. `read()` no longer loads the producer's reservation counter on
+  every call.
+- **BREAKING:** `q.traits` is a read-only snapshot, not the class passed in, so
+  `q.traits is MyTraits` is now False and its attributes cannot be assigned.
+- **BREAKING:** The private `_last_published_valid` attribute is gone; use
+  `q.traits.enable_read_last`.
+- `reserve(0)` raises `ValueError` instead of reserving nothing.
+
+### Added
+
+- `QueueTraits`, `default_queue_traits`, `validate_traits()`, and a `traits=`
+  argument on `SlickQueue`. Subclass `QueueTraits` to override
+  `enable_read_last`, `enable_reset_check`, `enable_loss_detection` or
+  `enable_cpu_relax`; differently configured queues coexist in one process.
+  `validate_traits()` rejects a malformed traits type at construction, as the C++
+  `queue_traits_type` concept does, and like it cannot catch a misspelled
+  override.
+- Constants `HEADER_MAGIC_FEATURE_MASK`, `HEADER_MAGIC_READ_LAST` and
+  `SLOT_SIZE_OFFSET`.
+- 40 tests. `tests/test_traits.py` (24) covers traits validation, the marker each
+  configuration writes, both mismatch directions, unmarked and unknown-feature
+  segments, and mutation of a traits class after construction.
+  `tests/test_reset_detection.py` (9) asserts a stale reader actually rewinds
+  onto the new generation, across both read paths and both memory modes.
+  `tests/test_wrap_invariants.py` (7) pins the cursor/size invariant under a
+  wrapping producer; three drive the recycle deterministically, because CPython
+  switches threads far too rarely to hit the window by racing.
+
+### Fixed
+
+- Both `read()` overloads loaded `slot.size` twice, unvalidated, so a producer
+  recycling the slot between the loads left the cursor describing a different
+  record than the caller was handed - in the shared-cursor overload the two loads
+  straddled the claiming CAS. Both now load it once and re-validate the slot
+  before committing, as `read_last()` does.
+- `read_last()` could return a `(data, size)` pair describing two different
+  records; the slot is now validated before and after the size load.
+- Reset detection never fired for the case it exists to handle. It compared the
+  *slot's* index against the reservation counter, but `reset()` clears the
+  control array before rewinding the counter, so a stale reader always landed on
+  a slot holding an invalid or fresh-low index - neither ahead of the counter.
+  The test is now on the reader's cursor, shared by both read paths through
+  `_was_reset()`.
+- The reset branch in the shared-cursor `read()` overwrote the cursor with a
+  blind store, discarding other consumers' progress; it now rewinds via
+  compare-exchange.
+- The single-consumer `read()` charged the loss counter when the overrun was
+  spotted rather than on commit, so a retry could count the same overrun twice.
+- `reset()` did not rewind the reservation counter in local memory mode.
+- Traits were re-read from the caller's class on every `publish()` and `read()`,
+  while the layout marker and the optional atomics were created once. Mutating
+  the class afterwards froze `read_last()` on an `'SLQ1'` segment, or raised
+  `AttributeError` from `publish()` and `reset()` because the last-published
+  atomic had never been created. They are snapshotted at construction now.
+
+### Changed
+
+- Loss detection is gated on `enable_loss_detection`, on by default. C++ keys its
+  equivalent off `NDEBUG` and needs two traits types so a debug/release mismatch
+  fails to link instead of violating the ODR; Python has no translation units to
+  protect, and `__debug__` was rejected because it would zero `loss_count()`
+  under `python -O`. It costs +0.2% on a reader that keeps up.
+- `publish()` updates the last-published index unconditionally when the feature
+  is on - validating the nibble once at attach time makes the old per-call
+  `_last_published_valid` check redundant.
+- Contended CAS loops in `reserve()` and the shared-cursor `read()` back off
+  through `_cpu_relax()`, gated on `enable_cpu_relax`.
+- C++ interop programs include the renamed `<slick/queue.hpp>` and use the
+  `slick::queue` alias; the old `<slick/queue.h>` path is a deprecation shim.
+- `tests/CMakeLists.txt` registers `test_loss_count.py` (missed in v1.2.0) and
+  the three new files. `tests/test_interop.py` bounds each child-result `get()`,
+  which previously hung a run forever when a child was killed on a join timeout.
+
+### Notes
+
+`slot.size` became a `std::atomic<uint32_t>` in C++ but stays a plain struct
+field here: that change fixed C++ undefined behaviour and compiler re-loading,
+neither of which exists in CPython, and the field is already an aligned 4-byte
+access with an identical wire format.
+
+The seqlock validation guarantees the cursor and the returned size describe one
+and the same record. It does **not** make the returned bytes a snapshot: a
+producer writes an element's data before it publishes the slot's new index, so a
+lapped consumer can copy bytes mid-overwrite and no check on the slot can detect
+it. C++ has the identical hazard behind the pointer it returns; `loss_count()` is
+how a consumer detects it. See README.md and API_DIFFERENCES.md.
+
+### Compatibility
+
+Verified against C++ slick-queue v2.0.0 binaries: all 10 interop tests pass, and
+a Python-created `'SLQ0'` segment is rejected by a C++ peer built with
+`enable_read_last` on, with the message the C++ side raises.
+
+## [v1.2.0] - 2026-07-09
+
+### Added
+- `loss_count()`: per-instance count of items skipped due to overwrite, matching
+  C++ slick-queue v1.5.0 (queue.h:230-236). Counted in both the single-consumer
+  read (slot overwritten by a newer generation at the same position) and the
+  AtomicCursor work-stealing read (overrun attributed to the claiming consumer).
+  Cleared by `reset()`. Note: Python always counts; C++ counts only when
+  `SLICK_QUEUE_ENABLE_LOSS_DETECTION` is enabled (debug builds by default).
+- `initial_reading_index()`: cursor for a late-joining consumer - 0 for a newly
+  created queue, or the current writing index of an opened queue, matching C++
+  slick-queue v1.5.0 (queue.h:242-244).
+- `tests/test_loss_count.py`: 7 tests covering both new methods.
+
+These are per-instance API additions only - the shared memory layout is unchanged
+and remains fully compatible with C++ slick-queue v1.x ('SLQ1' format).
+
+## [v1.1.0] - 2026-02-04
+
+### Breaking Changes
+- **BREAKING:** `read_last()` return signature changed from `Optional[bytes]` to `Tuple[Optional[bytes], int]`
+  - Now returns `(data, size)` tuple where `size` indicates the number of slots the item occupies
+  - Migration: Change `data = q.read_last()` to `data, size = q.read_last()`
+  - Provides actual slot size information instead of always returning full `element_size`
+
+### Added
+- Modern format support with efficient `last_published_` atomic tracking
+  - New `last_published_` atomic field at offset 16 for O(1) `read_last()` performance
+  - Header magic number `0x534C5131` ('SLQ1') at offset 24 for format detection
+  - Init state atomic at offset 48 for CAS-based ownership detection
+  - Automatic format detection distinguishes modern vs legacy queues
+- CAS-based queue ownership detection matching C++ implementation (queue.h:618-648)
+- Helper methods `_wait_for_shared_memory_ready()` and `_detect_format_version()`
+- Comprehensive test suites:
+  - `test_read_last.py`: 10 tests covering empty queue, single/multiple items, multi-slot publishes, concurrent publishes, reset, shared memory, wraparound, variable sizes
+  - `test_read_last_interop.py`: 5 tests for Python ↔ C++ interoperability
+  - `test_modern_format.py`: 6 tests for format compatibility and memory layout verification
+- C++ test program `cpp_read_last_tester.cpp` for read_last() interoperability testing
+- New constants: `SIZE_OFFSET`, `ELEMENT_SIZE_OFFSET`, `LAST_PUBLISHED_OFFSET`, `HEADER_MAGIC_OFFSET`, `HEADER_MAGIC`, `INIT_STATE_OFFSET`, `INIT_STATE_*`, `K_INVALID_INDEX`
+- Documentation: `READ_LAST_INTEROP.md` comprehensive interoperability guide
+
+### Changed
+- Updated shared memory header layout to match C++ slick-queue v1.x:
+  - Reserved info: 8 bytes at offset 0-7 (compact from previous 32-byte padded format)
+  - Size: 4 bytes at offset 8-11 (moved from offset 32)
+  - Element size: 4 bytes at offset 12-15 (moved from offset 36)
+  - Last published: 8 bytes at offset 16-23 (NEW)
+  - Header magic: 4 bytes at offset 24-27 (NEW)
+  - Init state: 4 bytes at offset 48-51 (NEW)
+- `publish()` now updates `last_published_` atomic using CAS loop in modern format (queue.h:331-337)
+- `reset()` now resets `last_published_` to `K_INVALID_INDEX` when in modern format
+- `close()` properly releases `_atomic_last_published` wrapper
+- `AtomicReservedInfo.RESERVED_INFO_FMT` simplified from 32-byte to 8-byte format
+- Repository name changed from slick_queue_py to slick-queue-py
+- Updated README.md with new `read_last()` API documentation
+- Enhanced CMakeLists.txt with new test targets
+
+### Fixed
+- `read_last()` now returns actual slot size instead of always returning full `element_size`
+- Test queue names shortened to comply with macOS 31-character shared memory name limit
+
+### Performance
+- O(1) `read_last()` via direct atomic load (improved from reserved_info calculation)
+- Reduced header size: 8-byte reserved_info vs 32-byte padded (24 bytes saved)
+- Lock-free `last_published_` tracking enables efficient concurrent access
+
+### Compatibility
+- **Backward Compatible:** Automatically detects and supports legacy queue format
+- **C++ Interop:** Full compatibility with C++ slick-queue modern format
+- Python and C++ can share queues created by either language
+- All existing tests continue to pass (atomic ops, cursors, local mode, multi-producer, interop)
+
+## [v1.0.1] - 2025-12-27
+
+### Fixed
+- Fixed extra `/` prefix being added to shared memory names on POSIX systems (Linux/macOS)
+- Fixed test failures on Linux and macOS platforms
+
+### Added
+- macOS shared memory name length validation (31 character limit including `/` prefix)
+- C++ extension support for Linux/macOS platforms with automatic fallback to native methods if unavailable
+- `atomic_store_64` and `atomic_cas_64` functions to C++ extension for improved cross-platform consistency
+
+### Changed
+- Linux/macOS now prioritize C++ extension for atomic operations, falling back to native methods (`__sync_val_compare_and_swap` or `libatomic`) if extension is not available
+- Improved atomic operation reliability across all platforms
+- Enhanced test suite for better cross-platform compatibility
+- Publishing: Updated PyPI builds to use `cibuildwheel` for proper manylinux wheel generation
+- Ignore conda publish failing for now
+
+## [v1.0.0] - 2025-12-26
+
+- Initial release
+- Python implementation of SlickQueue - a lock-free multi-producer multi-consumer (MPMC) queue with C++ interoperability through shared memory.
+- Windows, Linux, and macOS support