shapely 1.6.0__tar.gz → 1.6a2__tar.gz

{Shapely-1.6.0 → Shapely-1.6a2}/CHANGES.txt

@@ -1,62 +1,6 @@
 Changes
 =======
 
-1.6.0 (2017-08-21)
-------------------
-
-- Project documentation is now hosted at 
-  https://shapely.readthedocs.io/en/latest/.
-
-1.6b5 (2017-08-18)
-------------------
-
-Bug fixes:
-
-- Passing a single coordinate to ``LineString()`` with speedups disabled now
-  raises a ValueError as happens with speedups enabled. This resolves #509.
-
-1.6b4 (2017-02-15)
-------------------
-
-Bug fixes:
-
-- Isolate vendorized packaging in a _vendor directory, remove obsolete
-  dist-info, and remove packaging from project requirements (resolves #468).
-
-1.6b3 (2016-12-31)
-------------------
-
-Bug fixes:
-
-- Level for log messages originating from the GEOS notice handler reduced from
-  WARNING to INFO (#447).
-- Permit speedups to be imported again without Numpy (#444).
-
-1.6b2 (2016-12-12)
-------------------
-
-New features:
-
-- Add support for GeometryCollection to shape and asShape functions (#422).
-
-1.6b1 (2016-12-12)
-------------------
-
-Bug fixes:
-
-- Implemented __array_interface__ for empty Points and LineStrings (#403).
-
-1.6a3 (2016-12-01)
-------------------
-
-Bug fixes:
-
-- Remove accidental hard requirement of Numpy (#431).
-
-Packaging:
-
-- Put Numpy in an optional requirement set named "vectorized" (#431).
-
 1.6a2 (2016-11-09)
 ------------------
 

{Shapely-1.6.0 → Shapely-1.6a2}/CREDITS.txt

@@ -8,17 +8,16 @@ Shapely is written by:
 * Joshua Arnott <josh@snorfalorpagus.net>
 * Mike Toews <mwtoews@gmail.com>
 * Jacob Wasserman <jwasserman@gmail.com>
-* Aron Bierbaum <aronbierbaum@gmail.com>
+* aronbierbaum <aronbierbaum@b426a367-1105-0410-b9ff-cdf4ab011145>
 * Allan Adair <allan@rfspot.com>
 * Johannes Schönberger <jschoenberger@demuc.de>
 * georgeouzou <geothrock@gmail.com>
 * Phil Elson <pelson.pub@gmail.com>
 * Howard Butler <hobu.inc@gmail.com>
-* Kelsey Jordahl <kjordahl@enthought.com>
 * dokai <dokai@b426a367-1105-0410-b9ff-cdf4ab011145>
-* Kevin Wurster <kevin@skytruth.org>
 * Gabi Davar <grizzly.nyo@gmail.com>
-* Thibault Deutsch <thibault.deutsch@gmail.com>
+* Kevin Wurster <kevin@skytruth.org>
+* Kelsey Jordahl <kjordahl@enthought.com>
 * Dave Collins <dave@hopest.net>
 * fredj <frederic.junod@camptocamp.com>
 * Brad Hards <bradh@frogmouth.net>
@@ -34,18 +33,16 @@ Shapely is written by:
 * Jeethu Rao <jeethu@jeethurao.com>
 * Peter Sagerson <psagers.github@ignorare.net>
 * Jason Sanford <jason.sanford@mapmyfitness.com>
-* mindw <grizzly.nyo@gmail.com>
 * Jamie Hall <jamie1212@gmail.com>
 * James Spencer <james.s.spencer@gmail.com>
 * Stephan Hügel <urschrei@gmail.com>
-* Bas Couwenberg <sebastic@xs4all.nl>
-* James Douglass <jamesdouglassusa@gmail.com>
+* Benjamin Root <ben.v.root@gmail.com>
 * Tobias Sauerwein <tobias.sauerwein@camptocamp.com>
 * WANG Aiyong <gepcelway@gmail.com>
+* James Douglass <jamesdouglassusa@gmail.com>
 * Brandon Wood <btwood@geometeor.com>
-* BertrandGervais <bertrand.gervais.pro@gmail.com>
 * Andy Freeland <andy@andyfreeland.net>
-* Benjamin Root <ben.v.root@gmail.com>
+* BertrandGervais <bertrand.gervais.pro@gmail.com>
 * giumas <gmasetti@ccom.unh.edu>
 * Leandro Lima <leandro@limaesilva.com.br>
 * Maarten Vermeyen <maarten.vermeyen@rwo.vlaanderen.be>
@@ -59,6 +56,7 @@ Additional help from:
 
 * Justin Bronn (GeoDjango) for ctypes inspiration
 * Martin Davis (JTS)
+* Jaakko Salli for the Windows distributions
 * Sandro Santilli, Mateusz Loskot, Paul Ramsey, et al (GEOS Project)
 
 Major portions of this work were supported by a grant (for Pleiades_) from the

{Shapely-1.6.0/Shapely.egg-info → Shapely-1.6a2}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 1.1
 Name: Shapely
-Version: 1.6.0
+Version: 1.6a2
 Summary: Geometric objects, predicates, and operations
 Home-page: https://github.com/Toblerity/Shapely
 Author: Sean Gillies
@@ -10,17 +10,17 @@ Description: =======
         Shapely
         =======
         
+        Manipulation and analysis of geometric objects in the Cartesian plane.
+        
         .. image:: https://travis-ci.org/Toblerity/Shapely.png?branch=master
            :target: https://travis-ci.org/Toblerity/Shapely
         
         .. image:: https://coveralls.io/repos/github/Toblerity/Shapely/badge.svg?branch=master
            :target: https://coveralls.io/github/Toblerity/Shapely?branch=master
         
-        Manipulation and analysis of geometric objects in the Cartesian plane.
-        
-        .. image:: https://c2.staticflickr.com/6/5560/31301790086_b3472ea4e9_c.jpg
+        .. image:: http://farm3.staticflickr.com/2738/4511827859_b5822043b7_o_d.png
            :width: 800
-           :height: 378
+           :height: 400
         
         Shapely is a BSD-licensed Python package for manipulation and analysis of
         planar geometric objects. It is based on the widely deployed `GEOS
@@ -30,70 +30,54 @@ Description: =======
         libraries. Shapely is not concerned with data formats or coordinate systems,
         but can be readily integrated with packages that are. For more details, see:
         
-        * `Shapely GitHub repository <https://github.com/Toblerity/Shapely>`__
-        * `Shapely documentation and manual <https://shapely.readthedocs.io/en/latest/>`__
+        * Shapely on `GitHub <https://github.com/Toblerity/Shapely>`__
+        * The Shapely `manual <http://toblerity.github.com/shapely/manual.html>`__
         
         Requirements
         ============
         
-        Shapely 1.6 requires
+        Shapely 1.5.x requires
         
         * Python >=2.6 (including Python 3.x)
-        * GEOS >=3.3 
+        * GEOS >=3.3 (Shapely 1.2.x requires only GEOS 3.1 but YMMV)
         
-        Installing Shapely 1.6
-        ======================
+        Installing Shapely
+        ==================
         
-        Shapely may be installed from a source distribution or one of several kinds
-        of built distribution.
+        Windows users should download an executable installer from
+        http://www.lfd.uci.edu/~gohlke/pythonlibs/#shapely or PyPI (if available).
         
-        Built distributions
-        -------------------
-        
-        Windows users have two good installation options: the wheels at
-        http://www.lfd.uci.edu/~gohlke/pythonlibs/#shapely and the 
-        Anaconda platform's [conda-forge](https://conda-forge.github.io/)
-        channel.
-        
-        OS X and Linux users can get Shapely wheels with GEOS included from the 
-        Python Package Index with a recent version of pip (8+):
+        On other systems, acquire the GEOS by any means (`brew install geos` on OS X or
+        `apt-get install libgeos-dev` on Debian/Ubuntu), make sure that it is on the
+        system library path, and install Shapely from the Python package index.
         
         .. code-block:: console
         
             $ pip install shapely
         
-        A few extra speedups that require Numpy can be had by running
+        If you've installed GEOS to a non-standard location, the geos-config program
+        will be used to get compiler and linker options. If it is not on the PATH,
+        it can be specified with a GEOS_CONFIG environment variable, e.g.:
         
         .. code-block:: console
         
-            $ pip install shapely[vectorized]
-        
-        Shapely is available via system package management tools like apt, yum, and
-        Homebrew, and is also provided by popular Python distributions like Canopy and
-        Anaconda.
-        
-        Source distributions
-        --------------------
+            $ GEOS_CONFIG=/path/to/geos-config pip install shapely
         
-        If you want to build Shapely from source for compatibility with
-        other modules that depend on GEOS (such as cartopy or osgeo.ogr) or want to
-        use a different version of GEOS than the one included in the project wheels
-        you should first install the GEOS library, Cython, and Numpy on your system
-        (using apt, yum, brew, or other means) and then direct pip to ignore the binary
-        wheels.
+        If your system's GEOS version is < 3.3.0 you cannot use Shapely 1.3+ and must
+        stick to 1.2.x as shown below.
         
         .. code-block:: console
         
-            $ pip install shapely --no-binary shapely
+            $ pip install shapely<1.3
         
-        If you've installed GEOS to a standard location, the geos-config program
-        will be used to get compiler and linker options. If geos-config is not on
-        your executable, it can be specified with a GEOS_CONFIG environment
-        variable, e.g.:
+        Or, if you're using pip 6+
         
         .. code-block:: console
         
-            $ GEOS_CONFIG=/path/to/geos-config pip install shapely
+            $ pip install shapely~=1.2
+        
+        Shapely is also provided by popular Python distributions like Canopy (Enthought)
+        and Anaconda (Continuum Analytics).
         
         Usage
         =====
@@ -157,14 +141,22 @@ Description: =======
         
         .. code-block:: console
         
-            (env)$ python -m pytest
+            (env)$ py.test tests
+        
+        Roadmap and Maintenance
+        =======================
+        
+        Shapely 1.2.x is a maintenance-only branch which supports Python 2.4-2.6, but
+        not Python 3+. There will be no new features in Shapely 1.2.x and only fixes
+        for major bugs.
+        
+        Shapely 1.4.x is a maintenance-only branch supporting Pythons 2.7 and 3.3+.
         
         Support
         =======
         
-        Questions about using Shapely may be asked on the `GIS StackExchange 
-        <http://gis.stackexchange.com/questions/tagged/shapely>`__ using the "shapely"
-        tag.
+        Please discuss Shapely with us at
+        http://lists.gispython.org/mailman/listinfo/community.
         
         Bugs may be reported at https://github.com/Toblerity/Shapely/issues.
         
@@ -179,17 +171,16 @@ Description: =======
         * Joshua Arnott <josh@snorfalorpagus.net>
         * Mike Toews <mwtoews@gmail.com>
         * Jacob Wasserman <jwasserman@gmail.com>
-        * Aron Bierbaum <aronbierbaum@gmail.com>
+        * aronbierbaum <aronbierbaum@b426a367-1105-0410-b9ff-cdf4ab011145>
         * Allan Adair <allan@rfspot.com>
         * Johannes Schönberger <jschoenberger@demuc.de>
         * georgeouzou <geothrock@gmail.com>
         * Phil Elson <pelson.pub@gmail.com>
         * Howard Butler <hobu.inc@gmail.com>
-        * Kelsey Jordahl <kjordahl@enthought.com>
         * dokai <dokai@b426a367-1105-0410-b9ff-cdf4ab011145>
-        * Kevin Wurster <kevin@skytruth.org>
         * Gabi Davar <grizzly.nyo@gmail.com>
-        * Thibault Deutsch <thibault.deutsch@gmail.com>
+        * Kevin Wurster <kevin@skytruth.org>
+        * Kelsey Jordahl <kjordahl@enthought.com>
         * Dave Collins <dave@hopest.net>
         * fredj <frederic.junod@camptocamp.com>
         * Brad Hards <bradh@frogmouth.net>
@@ -205,18 +196,16 @@ Description: =======
         * Jeethu Rao <jeethu@jeethurao.com>
         * Peter Sagerson <psagers.github@ignorare.net>
         * Jason Sanford <jason.sanford@mapmyfitness.com>
-        * mindw <grizzly.nyo@gmail.com>
         * Jamie Hall <jamie1212@gmail.com>
         * James Spencer <james.s.spencer@gmail.com>
         * Stephan Hügel <urschrei@gmail.com>
-        * Bas Couwenberg <sebastic@xs4all.nl>
-        * James Douglass <jamesdouglassusa@gmail.com>
+        * Benjamin Root <ben.v.root@gmail.com>
         * Tobias Sauerwein <tobias.sauerwein@camptocamp.com>
         * WANG Aiyong <gepcelway@gmail.com>
+        * James Douglass <jamesdouglassusa@gmail.com>
         * Brandon Wood <btwood@geometeor.com>
-        * BertrandGervais <bertrand.gervais.pro@gmail.com>
         * Andy Freeland <andy@andyfreeland.net>
-        * Benjamin Root <ben.v.root@gmail.com>
+        * BertrandGervais <bertrand.gervais.pro@gmail.com>
         * giumas <gmasetti@ccom.unh.edu>
         * Leandro Lima <leandro@limaesilva.com.br>
         * Maarten Vermeyen <maarten.vermeyen@rwo.vlaanderen.be>
@@ -230,6 +219,7 @@ Description: =======
         
         * Justin Bronn (GeoDjango) for ctypes inspiration
         * Martin Davis (JTS)
+        * Jaakko Salli for the Windows distributions
         * Sandro Santilli, Mateusz Loskot, Paul Ramsey, et al (GEOS Project)
         
         Major portions of this work were supported by a grant (for Pleiades_) from the
@@ -241,62 +231,6 @@ Description: =======
         Changes
         =======
         
-        1.6.0 (2017-08-21)
-        ------------------
-        
-        - Project documentation is now hosted at 
-          https://shapely.readthedocs.io/en/latest/.
-        
-        1.6b5 (2017-08-18)
-        ------------------
-        
-        Bug fixes:
-        
-        - Passing a single coordinate to ``LineString()`` with speedups disabled now
-          raises a ValueError as happens with speedups enabled. This resolves #509.
-        
-        1.6b4 (2017-02-15)
-        ------------------
-        
-        Bug fixes:
-        
-        - Isolate vendorized packaging in a _vendor directory, remove obsolete
-          dist-info, and remove packaging from project requirements (resolves #468).
-        
-        1.6b3 (2016-12-31)
-        ------------------
-        
-        Bug fixes:
-        
-        - Level for log messages originating from the GEOS notice handler reduced from
-          WARNING to INFO (#447).
-        - Permit speedups to be imported again without Numpy (#444).
-        
-        1.6b2 (2016-12-12)
-        ------------------
-        
-        New features:
-        
-        - Add support for GeometryCollection to shape and asShape functions (#422).
-        
-        1.6b1 (2016-12-12)
-        ------------------
-        
-        Bug fixes:
-        
-        - Implemented __array_interface__ for empty Points and LineStrings (#403).
-        
-        1.6a3 (2016-12-01)
-        ------------------
-        
-        Bug fixes:
-        
-        - Remove accidental hard requirement of Numpy (#431).
-        
-        Packaging:
-        
-        - Put Numpy in an optional requirement set named "vectorized" (#431).
-        
         1.6a2 (2016-11-09)
         ------------------
         

{Shapely-1.6.0 → Shapely-1.6a2}/README.rst

@@ -2,17 +2,17 @@
 Shapely
 =======
 
+Manipulation and analysis of geometric objects in the Cartesian plane.
+
 .. image:: https://travis-ci.org/Toblerity/Shapely.png?branch=master
    :target: https://travis-ci.org/Toblerity/Shapely
 
 .. image:: https://coveralls.io/repos/github/Toblerity/Shapely/badge.svg?branch=master
    :target: https://coveralls.io/github/Toblerity/Shapely?branch=master
 
-Manipulation and analysis of geometric objects in the Cartesian plane.
-
-.. image:: https://c2.staticflickr.com/6/5560/31301790086_b3472ea4e9_c.jpg
+.. image:: http://farm3.staticflickr.com/2738/4511827859_b5822043b7_o_d.png
    :width: 800
-   :height: 378
+   :height: 400
 
 Shapely is a BSD-licensed Python package for manipulation and analysis of
 planar geometric objects. It is based on the widely deployed `GEOS
@@ -22,70 +22,54 @@ planar geometric objects. It is based on the widely deployed `GEOS
 libraries. Shapely is not concerned with data formats or coordinate systems,
 but can be readily integrated with packages that are. For more details, see:
 
-* `Shapely GitHub repository <https://github.com/Toblerity/Shapely>`__
-* `Shapely documentation and manual <https://shapely.readthedocs.io/en/latest/>`__
+* Shapely on `GitHub <https://github.com/Toblerity/Shapely>`__
+* The Shapely `manual <http://toblerity.github.com/shapely/manual.html>`__
 
 Requirements
 ============
 
-Shapely 1.6 requires
+Shapely 1.5.x requires
 
 * Python >=2.6 (including Python 3.x)
-* GEOS >=3.3 
+* GEOS >=3.3 (Shapely 1.2.x requires only GEOS 3.1 but YMMV)
 
-Installing Shapely 1.6
-======================
+Installing Shapely
+==================
 
-Shapely may be installed from a source distribution or one of several kinds
-of built distribution.
+Windows users should download an executable installer from
+http://www.lfd.uci.edu/~gohlke/pythonlibs/#shapely or PyPI (if available).
 
-Built distributions
--------------------
-
-Windows users have two good installation options: the wheels at
-http://www.lfd.uci.edu/~gohlke/pythonlibs/#shapely and the 
-Anaconda platform's [conda-forge](https://conda-forge.github.io/)
-channel.
-
-OS X and Linux users can get Shapely wheels with GEOS included from the 
-Python Package Index with a recent version of pip (8+):
+On other systems, acquire the GEOS by any means (`brew install geos` on OS X or
+`apt-get install libgeos-dev` on Debian/Ubuntu), make sure that it is on the
+system library path, and install Shapely from the Python package index.
 
 .. code-block:: console
 
     $ pip install shapely
 
-A few extra speedups that require Numpy can be had by running
+If you've installed GEOS to a non-standard location, the geos-config program
+will be used to get compiler and linker options. If it is not on the PATH,
+it can be specified with a GEOS_CONFIG environment variable, e.g.:
 
 .. code-block:: console
 
-    $ pip install shapely[vectorized]
-
-Shapely is available via system package management tools like apt, yum, and
-Homebrew, and is also provided by popular Python distributions like Canopy and
-Anaconda.
-
-Source distributions
---------------------
+    $ GEOS_CONFIG=/path/to/geos-config pip install shapely
 
-If you want to build Shapely from source for compatibility with
-other modules that depend on GEOS (such as cartopy or osgeo.ogr) or want to
-use a different version of GEOS than the one included in the project wheels
-you should first install the GEOS library, Cython, and Numpy on your system
-(using apt, yum, brew, or other means) and then direct pip to ignore the binary
-wheels.
+If your system's GEOS version is < 3.3.0 you cannot use Shapely 1.3+ and must
+stick to 1.2.x as shown below.
 
 .. code-block:: console
 
-    $ pip install shapely --no-binary shapely
+    $ pip install shapely<1.3
 
-If you've installed GEOS to a standard location, the geos-config program
-will be used to get compiler and linker options. If geos-config is not on
-your executable, it can be specified with a GEOS_CONFIG environment
-variable, e.g.:
+Or, if you're using pip 6+
 
 .. code-block:: console
 
-    $ GEOS_CONFIG=/path/to/geos-config pip install shapely
+    $ pip install shapely~=1.2
+
+Shapely is also provided by popular Python distributions like Canopy (Enthought)
+and Anaconda (Continuum Analytics).
 
 Usage
 =====
@@ -149,13 +133,21 @@ We use py.test to run Shapely's suite of unittests and doctests.
 
 .. code-block:: console
 
-    (env)$ python -m pytest
+    (env)$ py.test tests
+
+Roadmap and Maintenance
+=======================
+
+Shapely 1.2.x is a maintenance-only branch which supports Python 2.4-2.6, but
+not Python 3+. There will be no new features in Shapely 1.2.x and only fixes
+for major bugs.
+
+Shapely 1.4.x is a maintenance-only branch supporting Pythons 2.7 and 3.3+.
 
 Support
 =======
 
-Questions about using Shapely may be asked on the `GIS StackExchange 
-<http://gis.stackexchange.com/questions/tagged/shapely>`__ using the "shapely"
-tag.
+Please discuss Shapely with us at
+http://lists.gispython.org/mailman/listinfo/community.
 
 Bugs may be reported at https://github.com/Toblerity/Shapely/issues.