shapely 1.0__tar.gz → 1.0a7__tar.gz

Shapely-1.0a7/CREDITS.txt

@@ -0,0 +1,5 @@
+Sean Gillies (PCL)
+Howard Butler (PCL)
+Kai Lautaportti (PCL)
+Frédéric Junod (Camptocamp SA)
+Justin Bronn (GeoDjango) for ctypes inspiration

{Shapely-1.0 → Shapely-1.0a7}/PKG-INFO

@@ -1,16 +1,16 @@
 Metadata-Version: 1.0
 Name: Shapely
-Version: 1.0
+Version: 1.0a7
 Summary: Geospatial geometries, predicates, and operations
-Home-page: http://trac.gispython.org/projects/PCL/wiki/Shapely
+Home-page: http://trac.gispython.org/projects/PCL/wiki/ShapeLy
 Author: Sean Gillies
 Author-email: sgillies@frii.com
-License: BSD
+License: LGPL
 Description: Shapely
         =======
         
-        Shapely is a Python package for programming with 2D geospatial geometries. It
-        is based on GEOS (http://geos.refractions.net). Shapely 1.0 is ignorant about
+        Shapely is a Python package for programming with geospatial geometries. It is
+        based on GEOS (http://geos.refractions.net). Shapely 1.0 is ignorant about
         coordinate and reference systems. Projection responsibility is left to specific
         applications. For more information, see:
         
@@ -20,22 +20,21 @@ Description: Shapely
         Shapely requires Python 2.4+. (I've also begun to port it to Python 3.0:
         http://zcologia.com/news/564/shapely-for-python-3-0/.)
         
+        .. _wiki: http://trac.gispython.org/projects/PCL/wiki/Shapely
+        .. _manual: http://trac.gispython.org/projects/PCL/wiki/ShapelyManual
         
         Dependencies
         ------------
         
-        * libgeos_c (2.2.3 or 3.0.0+)
+        * libgeos_c (2.2.3, also reported to work with 3.0 after small modifications.)
         * Python ctypes_ (standard in Python 2.5+)
         
         .. _ctypes: http://pypi.python.org/pypi/ctypes/
         
-        
         Installation
         ------------
         
-        Windows users should use the executable installer, which contains the required
-        GEOS DLL. Other users should acquire libgeos_c by any means, make sure that it
-        is on the system library path, and install from the Python package index::
+        Shapely can be installed from the Python package index::
         
         $ sudo easy_install Shapely
         
@@ -43,29 +42,26 @@ Description: Shapely
         
         $ sudo python setup.py install
         
-        or by using the development buildout on Linux, which also provides libgeos_c::
+        or by using the development buildout, which also provides libgeos_c::
         
         $ svn co http://svn.gispython.org/svn/gispy/buildout/shapely.buildout/trunk shapely.buildout
         $ cd shapely.buildout
         $ python bootstrap.py
         $ ./bin/buildout
         
-        
         Usage
         -----
         
-        To buffer a point::
+        Buffer a point::
         
         >>> from shapely.geometry import Point
         >>> point = Point(-106.0, 40.0) # longitude, latitude
         >>> point.buffer(10.0)
         <shapely.geometry.polygon.Polygon object at ...>
         
-        See the manual_ for comprehensive examples of usage. See also Operations.txt
-        and Predicates.txt under tests/ for more examples of the spatial operations and
-        predicates provided by Shapely. See also Point.txt, LineString.txt, etc for
-        examples of the geometry APIs.
-        
+        See Operations.txt and Predicates.txt under tests/ for more examples of the
+        spatial operations and predicates provided by Shapely. Also see Point.txt,
+        LineString.txt, etc for examples of the geometry APIs.
         
         Numpy integration
         -----------------
@@ -87,7 +83,6 @@ Description: Shapely
         >>> line.wkt
         'LINESTRING (1.0000000000000000 2.0000000000000000, 3.0000000000000000 4.0000000000000000)'
         
-        
         Python Geo Interface
         --------------------
         
@@ -115,7 +110,6 @@ Description: Shapely
         See http://trac.gispython.org/projects/PCL/wiki/PythonGeoInterface for more
         details on the interface.
         
-        
         Testing
         -------
         
@@ -125,49 +119,15 @@ Description: Shapely
         $ python point.py
         
         There are also two test runners under tests/. test_doctests.py requires
-        zope.testing. runalldoctests.py does not. Perhaps the easiest way to run the
-        tests is::
-        
-        $ python setup.py test
-        
-        
-        Support
-        -------
-        
-        For current information about this project, see the wiki_.
-        
-        .. _wiki: http://trac.gispython.org/projects/PCL/wiki/Shapely
-        .. _manual: http://gispython.org/shapely/manual.html
-        
-        If you have questions, please consider joining our community list:
-        
-        http://trac.gispython.org/projects/PCL/wiki/CommunityList
-        
-        
-        Credits
-        -------
-        
-        * Sean Gillies (Pleiades)
-        * Howard Butler (Hobu, Inc.)
-        * Kai Lautaportti (Hexagon IT)
-        * Fr |eaigue| d |eaigue| ric Junod (Camptocamp SA)
-        * Eric Lemoine (Camptocamp SA)
-        * Justin Bronn (GeoDjango) for ctypes inspiration
-        * Artem Pavlenko (Mapnik) for help with GEOS DLLs
-        
-        .. |eaigue| unicode:: U+00E9
-        :trim:
-        
-        Major portions of this work were supported by a grant (to Pleiades) from the
-        U.S.  National Endowment for the Humanities (http://www.neh.gov).
+        zope.testing. runalldoctests.py does not.
         
         
 Keywords: geometry topology
 Platform: UNKNOWN
-Classifier: Development Status :: 5 - Production/Stable
+Classifier: Development Status :: 3 - Alpha
 Classifier: Intended Audience :: Developers
 Classifier: Intended Audience :: Science/Research
-Classifier: License :: OSI Approved :: BSD License
+Classifier: License :: OSI Approved :: GNU Library or Lesser General Public License (LGPL)
 Classifier: Operating System :: OS Independent
 Classifier: Programming Language :: Python
 Classifier: Topic :: Scientific/Engineering :: GIS

{Shapely-1.0 → Shapely-1.0a7}/README.txt

@@ -1,8 +1,8 @@
 Shapely
 =======
 
-Shapely is a Python package for programming with 2D geospatial geometries. It
-is based on GEOS (http://geos.refractions.net). Shapely 1.0 is ignorant about
+Shapely is a Python package for programming with geospatial geometries. It is
+based on GEOS (http://geos.refractions.net). Shapely 1.0 is ignorant about
 coordinate and reference systems. Projection responsibility is left to specific
 applications. For more information, see:
 
@@ -12,22 +12,21 @@ applications. For more information, see:
 Shapely requires Python 2.4+. (I've also begun to port it to Python 3.0:
 http://zcologia.com/news/564/shapely-for-python-3-0/.)
 
+.. _wiki: http://trac.gispython.org/projects/PCL/wiki/Shapely
+.. _manual: http://trac.gispython.org/projects/PCL/wiki/ShapelyManual
 
 Dependencies
 ------------
 
-* libgeos_c (2.2.3 or 3.0.0+)
+* libgeos_c (2.2.3, also reported to work with 3.0 after small modifications.)
 * Python ctypes_ (standard in Python 2.5+)
 
 .. _ctypes: http://pypi.python.org/pypi/ctypes/
 
-
 Installation
 ------------
 
-Windows users should use the executable installer, which contains the required
-GEOS DLL. Other users should acquire libgeos_c by any means, make sure that it
-is on the system library path, and install from the Python package index::
+Shapely can be installed from the Python package index::
 
   $ sudo easy_install Shapely
 
@@ -35,29 +34,26 @@ with the setup script::
 
   $ sudo python setup.py install
 
-or by using the development buildout on Linux, which also provides libgeos_c::
-
-  $ svn co http://svn.gispython.org/svn/gispy/buildout/shapely.buildout/trunk shapely.buildout
-  $ cd shapely.buildout
-  $ python bootstrap.py
-  $ ./bin/buildout
+or by using the development buildout, which also provides libgeos_c::
 
+ $ svn co http://svn.gispython.org/svn/gispy/buildout/shapely.buildout/trunk shapely.buildout
+ $ cd shapely.buildout
+ $ python bootstrap.py
+ $ ./bin/buildout
 
 Usage
 -----
 
-To buffer a point::
+Buffer a point::
 
   >>> from shapely.geometry import Point
   >>> point = Point(-106.0, 40.0) # longitude, latitude
   >>> point.buffer(10.0)
   <shapely.geometry.polygon.Polygon object at ...>
 
-See the manual_ for comprehensive examples of usage. See also Operations.txt
-and Predicates.txt under tests/ for more examples of the spatial operations and
-predicates provided by Shapely. See also Point.txt, LineString.txt, etc for
-examples of the geometry APIs.
-
+See Operations.txt and Predicates.txt under tests/ for more examples of the
+spatial operations and predicates provided by Shapely. Also see Point.txt,
+LineString.txt, etc for examples of the geometry APIs.
 
 Numpy integration
 -----------------
@@ -79,7 +75,6 @@ Numpy arrays can also be adapted to Shapely points and linestrings::
   >>> line.wkt
   'LINESTRING (1.0000000000000000 2.0000000000000000, 3.0000000000000000 4.0000000000000000)'
 
-
 Python Geo Interface
 --------------------
 
@@ -107,7 +102,6 @@ geometry with the asShape factory::
 See http://trac.gispython.org/projects/PCL/wiki/PythonGeoInterface for more
 details on the interface.
 
-
 Testing
 -------
 
@@ -117,39 +111,5 @@ Several of the modules have docstring doctests::
   $ python point.py
 
 There are also two test runners under tests/. test_doctests.py requires
-zope.testing. runalldoctests.py does not. Perhaps the easiest way to run the 
-tests is::
-
-  $ python setup.py test
-
-
-Support
--------
-
-For current information about this project, see the wiki_.
-
-.. _wiki: http://trac.gispython.org/projects/PCL/wiki/Shapely
-.. _manual: http://gispython.org/shapely/manual.html
-
-If you have questions, please consider joining our community list:
-
-http://trac.gispython.org/projects/PCL/wiki/CommunityList
-
-
-Credits
--------
-
-* Sean Gillies (Pleiades)
-* Howard Butler (Hobu, Inc.)
-* Kai Lautaportti (Hexagon IT)
-* Fr |eaigue| d |eaigue| ric Junod (Camptocamp SA)
-* Eric Lemoine (Camptocamp SA)
-* Justin Bronn (GeoDjango) for ctypes inspiration
-* Artem Pavlenko (Mapnik) for help with GEOS DLLs
-
-.. |eaigue| unicode:: U+00E9
-   :trim:
-
-Major portions of this work were supported by a grant (to Pleiades) from the
-U.S.  National Endowment for the Humanities (http://www.neh.gov).
+zope.testing. runalldoctests.py does not.
 

{Shapely-1.0 → Shapely-1.0a7}/Shapely.egg-info/PKG-INFO

@@ -1,16 +1,16 @@
 Metadata-Version: 1.0
 Name: Shapely
-Version: 1.0
+Version: 1.0a7
 Summary: Geospatial geometries, predicates, and operations
-Home-page: http://trac.gispython.org/projects/PCL/wiki/Shapely
+Home-page: http://trac.gispython.org/projects/PCL/wiki/ShapeLy
 Author: Sean Gillies
 Author-email: sgillies@frii.com
-License: BSD
+License: LGPL
 Description: Shapely
         =======
         
-        Shapely is a Python package for programming with 2D geospatial geometries. It
-        is based on GEOS (http://geos.refractions.net). Shapely 1.0 is ignorant about
+        Shapely is a Python package for programming with geospatial geometries. It is
+        based on GEOS (http://geos.refractions.net). Shapely 1.0 is ignorant about
         coordinate and reference systems. Projection responsibility is left to specific
         applications. For more information, see:
         
@@ -20,22 +20,21 @@ Description: Shapely
         Shapely requires Python 2.4+. (I've also begun to port it to Python 3.0:
         http://zcologia.com/news/564/shapely-for-python-3-0/.)
         
+        .. _wiki: http://trac.gispython.org/projects/PCL/wiki/Shapely
+        .. _manual: http://trac.gispython.org/projects/PCL/wiki/ShapelyManual
         
         Dependencies
         ------------
         
-        * libgeos_c (2.2.3 or 3.0.0+)
+        * libgeos_c (2.2.3, also reported to work with 3.0 after small modifications.)
         * Python ctypes_ (standard in Python 2.5+)
         
         .. _ctypes: http://pypi.python.org/pypi/ctypes/
         
-        
         Installation
         ------------
         
-        Windows users should use the executable installer, which contains the required
-        GEOS DLL. Other users should acquire libgeos_c by any means, make sure that it
-        is on the system library path, and install from the Python package index::
+        Shapely can be installed from the Python package index::
         
         $ sudo easy_install Shapely
         
@@ -43,29 +42,26 @@ Description: Shapely
         
         $ sudo python setup.py install
         
-        or by using the development buildout on Linux, which also provides libgeos_c::
+        or by using the development buildout, which also provides libgeos_c::
         
         $ svn co http://svn.gispython.org/svn/gispy/buildout/shapely.buildout/trunk shapely.buildout
         $ cd shapely.buildout
         $ python bootstrap.py
         $ ./bin/buildout
         
-        
         Usage
         -----
         
-        To buffer a point::
+        Buffer a point::
         
         >>> from shapely.geometry import Point
         >>> point = Point(-106.0, 40.0) # longitude, latitude
         >>> point.buffer(10.0)
         <shapely.geometry.polygon.Polygon object at ...>
         
-        See the manual_ for comprehensive examples of usage. See also Operations.txt
-        and Predicates.txt under tests/ for more examples of the spatial operations and
-        predicates provided by Shapely. See also Point.txt, LineString.txt, etc for
-        examples of the geometry APIs.
-        
+        See Operations.txt and Predicates.txt under tests/ for more examples of the
+        spatial operations and predicates provided by Shapely. Also see Point.txt,
+        LineString.txt, etc for examples of the geometry APIs.
         
         Numpy integration
         -----------------
@@ -87,7 +83,6 @@ Description: Shapely
         >>> line.wkt
         'LINESTRING (1.0000000000000000 2.0000000000000000, 3.0000000000000000 4.0000000000000000)'
         
-        
         Python Geo Interface
         --------------------
         
@@ -115,7 +110,6 @@ Description: Shapely
         See http://trac.gispython.org/projects/PCL/wiki/PythonGeoInterface for more
         details on the interface.
         
-        
         Testing
         -------
         
@@ -125,49 +119,15 @@ Description: Shapely
         $ python point.py
         
         There are also two test runners under tests/. test_doctests.py requires
-        zope.testing. runalldoctests.py does not. Perhaps the easiest way to run the
-        tests is::
-        
-        $ python setup.py test
-        
-        
-        Support
-        -------
-        
-        For current information about this project, see the wiki_.
-        
-        .. _wiki: http://trac.gispython.org/projects/PCL/wiki/Shapely
-        .. _manual: http://gispython.org/shapely/manual.html
-        
-        If you have questions, please consider joining our community list:
-        
-        http://trac.gispython.org/projects/PCL/wiki/CommunityList
-        
-        
-        Credits
-        -------
-        
-        * Sean Gillies (Pleiades)
-        * Howard Butler (Hobu, Inc.)
-        * Kai Lautaportti (Hexagon IT)
-        * Fr |eaigue| d |eaigue| ric Junod (Camptocamp SA)
-        * Eric Lemoine (Camptocamp SA)
-        * Justin Bronn (GeoDjango) for ctypes inspiration
-        * Artem Pavlenko (Mapnik) for help with GEOS DLLs
-        
-        .. |eaigue| unicode:: U+00E9
-        :trim:
-        
-        Major portions of this work were supported by a grant (to Pleiades) from the
-        U.S.  National Endowment for the Humanities (http://www.neh.gov).
+        zope.testing. runalldoctests.py does not.
         
         
 Keywords: geometry topology
 Platform: UNKNOWN
-Classifier: Development Status :: 5 - Production/Stable
+Classifier: Development Status :: 3 - Alpha
 Classifier: Intended Audience :: Developers
 Classifier: Intended Audience :: Science/Research
-Classifier: License :: OSI Approved :: BSD License
+Classifier: License :: OSI Approved :: GNU Library or Lesser General Public License (LGPL)
 Classifier: Operating System :: OS Independent
 Classifier: Programming Language :: Python
 Classifier: Topic :: Scientific/Engineering :: GIS

{Shapely-1.0 → Shapely-1.0a7}/Shapely.egg-info/SOURCES.txt

@@ -1,10 +1,6 @@
-CHANGES.txt
 CREDITS.txt
-HISTORY.txt
-LICENSE.txt
 README.txt
 setup.py
-setup_windows.py
 Shapely.egg-info/PKG-INFO
 Shapely.egg-info/SOURCES.txt
 Shapely.egg-info/dependency_links.txt
@@ -12,8 +8,6 @@ Shapely.egg-info/requires.txt
 Shapely.egg-info/top_level.txt
 examples/geoms.py
 examples/world.py
-manual/manual.txt
-manual/style.css
 shapely/__init__.py
 shapely/geos.py
 shapely/iterops.py
@@ -45,8 +39,7 @@ tests/Point.txt
 tests/Polygon.txt
 tests/Predicates.txt
 tests/__init__.py
-tests/binascii_hex.txt
-tests/invalid_intersection.txt
+tests/runalldoctests.py
 tests/rungrind.dist
+tests/runtests.dist
 tests/test_doctests.py
-tests/valgrind-python.supp

{Shapely-1.0 → Shapely-1.0a7}/setup.py

@@ -1,35 +1,28 @@
 
 from setuptools import setup, Extension
-from sys import version_info
-
-# Require ctypes egg only for Python < 2.5
-install_requires = ['setuptools']
-if version_info[:2] < (2,5):
-    install_requires.append('ctypes')
 
 # Get text from README.txt
 readme_text = file('README.txt', 'rb').read()
 
 setup(name          = 'Shapely',
-      version       = '1.0',
+      version       = '1.0a7',
       description   = 'Geospatial geometries, predicates, and operations',
-      license       = 'BSD',
+      license       = 'LGPL',
       keywords      = 'geometry topology',
       author        = 'Sean Gillies',
       author_email  = 'sgillies@frii.com',
       maintainer    = 'Sean Gillies',
       maintainer_email  = 'sgillies@frii.com',
-      url   = 'http://trac.gispython.org/projects/PCL/wiki/Shapely',
+      url   = 'http://trac.gispython.org/projects/PCL/wiki/ShapeLy',
       long_description = readme_text,
       packages      = ['shapely', 'shapely.geometry'],
-      install_requires = install_requires,
-      #tests_require = ['numpy'], -- not working with "tests" command
-      test_suite = 'tests.test_suite',
+      install_requires = ['setuptools', 'ctypes'],
+      tests_require = ['zope.testing', 'numpy'],
       classifiers   = [
-        'Development Status :: 5 - Production/Stable',
+        'Development Status :: 3 - Alpha',
         'Intended Audience :: Developers',
         'Intended Audience :: Science/Research',
-        'License :: OSI Approved :: BSD License',
+        'License :: OSI Approved :: GNU Library or Lesser General Public License (LGPL)',
         'Operating System :: OS Independent',
         'Programming Language :: Python',
         'Topic :: Scientific/Engineering :: GIS',