setupEM 0.14.0__tar.gz → 0.14.1__tar.gz

setupem-0.14.1/PKG-INFO

@@ -0,0 +1,73 @@
+Metadata-Version: 2.4
+Name: setupEM
+Version: 0.14.1
+Summary: Python tool for configuration of gds2palace workflow with GUI.
+Author-email: Volker Muehlhaus <volker@muehlhaus.com>
+License-Expression: GPL-3.0-or-later
+Project-URL: Homepage, https://github.com/VolkerMuehlhaus/setupEM
+Project-URL: Repository, https://github.com/VolkerMuehlhaus/setupEM
+Project-URL: Changelog, https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md
+Requires-Python: >=3.9
+Description-Content-Type: text/markdown
+License-File: LICENSE
+Requires-Dist: gds2palace>=0.9.0
+Requires-Dist: gds_prepare_for_EM>=1.3.0
+Requires-Dist: PySide6
+Requires-Dist: shiboken6
+Requires-Dist: scipy
+Requires-Dist: requests
+Requires-Dist: scikit-rf
+Requires-Dist: matplotlib
+Requires-Dist: numpy
+Requires-Dist: gdspy
+Requires-Dist: meshio
+Requires-Dist: pyvista
+Requires-Dist: pyvistaqt
+Dynamic: license-file
+
+# Python GUI for gds2palace 
+
+![Intro](https://raw.githubusercontent.com/VolkerMuehlhaus/setupEM/main/doc/png/setupEM_banner.png)
+
+## Install
+
+    pip install setupEM
+
+**Full documentation, installation guide, and usage walkthrough:**
+https://github.com/VolkerMuehlhaus/setupEM
+
+## Recent changes
+
+# What's New - October 19, 2026
+
+**Stackup Editor, ADS Momentum (*.ltd) import:** metals with an EXPAND thickness operation now make the dielectric next to them thicker, as in ADS, instead of reaching into the dielectric below. Before, a thick EXPAND DOWN metal (e.g. MET1/MET2 in a GaAs stackup) overlapped the layers underneath it, and a via could end up with zero height. Files where long lines are wrapped or END_... markers follow the last entry on the same line now import too; before, they failed with "No usable dielectric slabs".
+
+# What's New - October 18, 2026
+
+**Touchstone files with different port impedances:** the option line of the combined `.sNp` file now has one Z0 per port, in port order. Before, ports with the same Z0 as port 1 were left out.
+
+# What's New - October 17, 2026
+
+**Conductor model** replaces **Conductor meshing** on the Mesh and Boundaries tab (Palace only), with a third choice: **Surface impedance** (default, as before), **Solve inside (volume mesh)** and the new **Solve inside + skin layers**, which adds thin layers along the conductor faces for accurate Q and loss at high frequency. Generated model scripts now use `settings['conductor_model']` instead of `settings['filled_metals']`. Older projects and model scripts with `filled_metals` still load. setupEM now requires gds2palace 0.9.0 or later; `pip install --upgrade setupEM` updates it.
+
+Full history: [CHANGES.md](https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md)
+
+---
+
+**Note:** the `setupEM` PyPI package itself requires:
+
+- gds2palace>=0.9.0
+- gds_prepare_for_EM>=1.3.0
+- PySide6
+- shiboken6
+- scipy
+- requests
+- scikit-rf
+- matplotlib
+- numpy
+- gdspy
+- meshio
+- pyvista
+- pyvistaqt
+
+(Other Python modules mentioned above are only needed to run standalone helper scripts in this repository, not to use the installed package.)

setupem-0.14.1/README_pypi.md

@@ -0,0 +1,46 @@
+# Python GUI for gds2palace 
+
+![Intro](https://raw.githubusercontent.com/VolkerMuehlhaus/setupEM/main/doc/png/setupEM_banner.png)
+
+## Install
+
+    pip install setupEM
+
+**Full documentation, installation guide, and usage walkthrough:**
+https://github.com/VolkerMuehlhaus/setupEM
+
+## Recent changes
+
+# What's New - October 19, 2026
+
+**Stackup Editor, ADS Momentum (*.ltd) import:** metals with an EXPAND thickness operation now make the dielectric next to them thicker, as in ADS, instead of reaching into the dielectric below. Before, a thick EXPAND DOWN metal (e.g. MET1/MET2 in a GaAs stackup) overlapped the layers underneath it, and a via could end up with zero height. Files where long lines are wrapped or END_... markers follow the last entry on the same line now import too; before, they failed with "No usable dielectric slabs".
+
+# What's New - October 18, 2026
+
+**Touchstone files with different port impedances:** the option line of the combined `.sNp` file now has one Z0 per port, in port order. Before, ports with the same Z0 as port 1 were left out.
+
+# What's New - October 17, 2026
+
+**Conductor model** replaces **Conductor meshing** on the Mesh and Boundaries tab (Palace only), with a third choice: **Surface impedance** (default, as before), **Solve inside (volume mesh)** and the new **Solve inside + skin layers**, which adds thin layers along the conductor faces for accurate Q and loss at high frequency. Generated model scripts now use `settings['conductor_model']` instead of `settings['filled_metals']`. Older projects and model scripts with `filled_metals` still load. setupEM now requires gds2palace 0.9.0 or later; `pip install --upgrade setupEM` updates it.
+
+Full history: [CHANGES.md](https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md)
+
+---
+
+**Note:** the `setupEM` PyPI package itself requires:
+
+- gds2palace>=0.9.0
+- gds_prepare_for_EM>=1.3.0
+- PySide6
+- shiboken6
+- scipy
+- requests
+- scikit-rf
+- matplotlib
+- numpy
+- gdspy
+- meshio
+- pyvista
+- pyvistaqt
+
+(Other Python modules mentioned above are only needed to run standalone helper scripts in this repository, not to use the installed package.)

{setupem-0.14.0 → setupem-0.14.1}/src/setupEM/__init__.py

@@ -24,4 +24,4 @@ A Python tool for EM setup using gds2palace.
 from .setupEM import main
 
 __all__ = ["main"]
-__version__ = "0.14.0"
+__version__ = "0.14.1"

{setupem-0.14.0 → setupem-0.14.1}/src/setupEM/momentum_import.py

@@ -294,12 +294,15 @@ def _build_tree(slabs, layers, materials, warnings, derived_layers=None):
   # (both source formats define it that way) rather than that metal's TOP, where it
   # actually needs to start - shift any via whose zmin coincides with a metal's zmin
   # up by that metal's own thickness.
+  # A metal that only shares its zmin with the via by coincidence (e.g. a thick *.ltd
+  # EXPAND DOWN metal reaching the via's bottom interface) must not shrink the via to
+  # nothing - only nudge while the via keeps a positive height.
   metal_spans = [(l.zmin, l.zmax - l.zmin) for l in layers if l.kind == "metal"]
   for l in layers:
     if l.kind != "via":
       continue
     for metal_zmin, metal_thickness in metal_spans:
-      if abs(l.zmin - metal_zmin) < _EPSILON_UM:
+      if abs(l.zmin - metal_zmin) < _EPSILON_UM and l.zmin + metal_thickness < l.zmax - _EPSILON_UM:
         l.zmin += metal_thickness
         break
 
@@ -584,7 +587,23 @@ def _ltd_kv(line):
   return {key.upper(): value.strip('"') for key, value in _KV_RE.findall(line)}
 
 
+# keywords that start a new statement in each section - any other line in these sections
+# is a continuation of the previous statement (a long MATERIAL/MASK/LAYER line wrapped
+# onto the next line, e.g. "IMAG_PERMEABILITY=0", "OPERATION=...", or a MASK's own
+# "MASK_PROPERTIES = {...}" line) and is joined back onto it
+_LTD_STATEMENT_KEYWORDS = {
+    "MATERIAL": {"MATERIAL"},
+    "OPERATION": {"OPERATION"},
+    "MASK": {"MASK"},
+    "DERIVEDMASK": {"DERIVEDMASK"},
+    "STACK": {"TOP", "INTERFACE", "LAYER", "BOTTOM"},
+}
+
+
 def _split_ltd_sections(text):
+  # END_<section> is not always on a line of its own - seen trailing the last statement
+  # ("OPERATION OperationTSV_Virtual_VIA1 DRILL END_OPERATION")
+  text = re.sub(r'\s+(END_\w+)\b', r'\n\1', text)
   sections = {}
   current = None
   buf = []
@@ -603,7 +622,11 @@ def _split_ltd_sections(text):
       current = None
       continue
     if current:
-      buf.append(line)
+      keywords = _LTD_STATEMENT_KEYWORDS.get(current)
+      if keywords and buf and line.split()[0] not in keywords:
+        buf[-1] = buf[-1] + " " + line
+      else:
+        buf.append(line)
   return sections
 
 
@@ -679,10 +702,13 @@ def _parse_ltd(ltd_path, air_thickness_um, warnings):
     elif "INTRUDE" in kv or "EXPAND" in kv:
       # both give a thickness in meters; DOWN (vs. the default UP) means this metal
       # grows downward from its interface into the slab below - same concept *.subst
-      # expresses via a negative thick value, here via an explicit direction token
+      # expresses via a negative thick value, here via an explicit direction token.
+      # INTRUDE places the metal inside the existing slab; EXPAND makes that slab
+      # thicker by the metal thickness (same as *.subst's expand="1"), handled when
+      # the stack is walked below.
       magnitude_um = float(kv.get("INTRUDE") or kv.get("EXPAND")) * 1e6
       thickness_um = -magnitude_um if "DOWN" in tokens else magnitude_um
-      operations[name] = ("metal", thickness_um)
+      operations[name] = ("metal", thickness_um, "EXPAND" in kv)
     elif "SHEET" in tokens:
       operations[name] = ("sheet", None)
     elif "WALL" in tokens:
@@ -773,7 +799,33 @@ def _parse_ltd(ltd_path, air_thickness_um, warnings):
   groundplane_detected = False
   bottom_state = None
 
-  for line in reversed(stack_lines):
+  # EXPAND metals make the dielectric LAYER next to their INTERFACE thicker (DOWN: the
+  # LAYER below, UP: the one above) - by the thickest such metal on that interface, not
+  # the sum (ADS shows TFR 0.05um + MET1 1um EXPAND DOWN on one interface as +1um). A
+  # LAYER can grow from both sides (metal EXPAND UP below it, another EXPAND DOWN above
+  # it), which adds up. Must be known before the bottom-up walk reaches that LAYER, so
+  # collected up front: (line index in file order, top-to-bottom; +1 DOWN / -1 UP) ->
+  # extra thickness in um
+  expand_um = {}
+  for idx, line in enumerate(stack_lines):
+    if line.split()[0] != "INTERFACE":
+      continue
+    mask_match = _MASK_BRACE_RE.search(line)
+    for token in mask_match.group(1).split() if mask_match else []:
+      mask = _resolve_mask_token(token, masks, masks_by_layer)
+      op = operations.get(mask["operation"]) if mask else None
+      if op is None or op[0] != "metal" or not op[2]:
+        continue
+      side = 1 if op[1] < 0 else -1
+      target = idx + side
+      if 0 <= target < len(stack_lines) and stack_lines[target].split()[0] == "LAYER":
+        expand_um[(target, side)] = max(expand_um.get((target, side), 0.0), abs(op[1]))
+      else:
+        warnings.append(f"Mask '{mask['name']}' uses EXPAND but has no dielectric LAYER on that "
+                         f"side of its INTERFACE - placed without growing any layer")
+
+  for idx in reversed(range(len(stack_lines))):
+    line = stack_lines[idx]
     tokens = line.split()
     if not tokens:
       continue
@@ -809,7 +861,8 @@ def _parse_ltd(ltd_path, air_thickness_um, warnings):
       if material_name not in materials:
         warnings.append(f"Dielectric slab material '{material_name}' not found, skipped")
         continue
-      thickness_um = float(height_m) * 1e6 if height_m else 0.0
+      thickness_um = ((float(height_m) * 1e6 if height_m else 0.0)
+                      + expand_um.get((idx, 1), 0.0) + expand_um.get((idx, -1), 0.0))
       zmin = z
       z += thickness_um
       slabs.append(DielectricSlab(material_name, thickness_um))

setupem-0.14.1/src/setupEM.egg-info/PKG-INFO

@@ -0,0 +1,73 @@
+Metadata-Version: 2.4
+Name: setupEM
+Version: 0.14.1
+Summary: Python tool for configuration of gds2palace workflow with GUI.
+Author-email: Volker Muehlhaus <volker@muehlhaus.com>
+License-Expression: GPL-3.0-or-later
+Project-URL: Homepage, https://github.com/VolkerMuehlhaus/setupEM
+Project-URL: Repository, https://github.com/VolkerMuehlhaus/setupEM
+Project-URL: Changelog, https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md
+Requires-Python: >=3.9
+Description-Content-Type: text/markdown
+License-File: LICENSE
+Requires-Dist: gds2palace>=0.9.0
+Requires-Dist: gds_prepare_for_EM>=1.3.0
+Requires-Dist: PySide6
+Requires-Dist: shiboken6
+Requires-Dist: scipy
+Requires-Dist: requests
+Requires-Dist: scikit-rf
+Requires-Dist: matplotlib
+Requires-Dist: numpy
+Requires-Dist: gdspy
+Requires-Dist: meshio
+Requires-Dist: pyvista
+Requires-Dist: pyvistaqt
+Dynamic: license-file
+
+# Python GUI for gds2palace 
+
+![Intro](https://raw.githubusercontent.com/VolkerMuehlhaus/setupEM/main/doc/png/setupEM_banner.png)
+
+## Install
+
+    pip install setupEM
+
+**Full documentation, installation guide, and usage walkthrough:**
+https://github.com/VolkerMuehlhaus/setupEM
+
+## Recent changes
+
+# What's New - October 19, 2026
+
+**Stackup Editor, ADS Momentum (*.ltd) import:** metals with an EXPAND thickness operation now make the dielectric next to them thicker, as in ADS, instead of reaching into the dielectric below. Before, a thick EXPAND DOWN metal (e.g. MET1/MET2 in a GaAs stackup) overlapped the layers underneath it, and a via could end up with zero height. Files where long lines are wrapped or END_... markers follow the last entry on the same line now import too; before, they failed with "No usable dielectric slabs".
+
+# What's New - October 18, 2026
+
+**Touchstone files with different port impedances:** the option line of the combined `.sNp` file now has one Z0 per port, in port order. Before, ports with the same Z0 as port 1 were left out.
+
+# What's New - October 17, 2026
+
+**Conductor model** replaces **Conductor meshing** on the Mesh and Boundaries tab (Palace only), with a third choice: **Surface impedance** (default, as before), **Solve inside (volume mesh)** and the new **Solve inside + skin layers**, which adds thin layers along the conductor faces for accurate Q and loss at high frequency. Generated model scripts now use `settings['conductor_model']` instead of `settings['filled_metals']`. Older projects and model scripts with `filled_metals` still load. setupEM now requires gds2palace 0.9.0 or later; `pip install --upgrade setupEM` updates it.
+
+Full history: [CHANGES.md](https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md)
+
+---
+
+**Note:** the `setupEM` PyPI package itself requires:
+
+- gds2palace>=0.9.0
+- gds_prepare_for_EM>=1.3.0
+- PySide6
+- shiboken6
+- scipy
+- requests
+- scikit-rf
+- matplotlib
+- numpy
+- gdspy
+- meshio
+- pyvista
+- pyvistaqt
+
+(Other Python modules mentioned above are only needed to run standalone helper scripts in this repository, not to use the installed package.)

setupem-0.14.0/PKG-INFO

@@ -1,85 +0,0 @@
-Metadata-Version: 2.4
-Name: setupEM
-Version: 0.14.0
-Summary: Python tool for configuration of gds2palace workflow with GUI.
-Author-email: Volker Muehlhaus <volker@muehlhaus.com>
-License-Expression: GPL-3.0-or-later
-Project-URL: Homepage, https://github.com/VolkerMuehlhaus/setupEM
-Project-URL: Repository, https://github.com/VolkerMuehlhaus/setupEM
-Project-URL: Changelog, https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md
-Requires-Python: >=3.9
-Description-Content-Type: text/markdown
-License-File: LICENSE
-Requires-Dist: gds2palace>=0.9.0
-Requires-Dist: gds_prepare_for_EM>=1.3.0
-Requires-Dist: PySide6
-Requires-Dist: shiboken6
-Requires-Dist: scipy
-Requires-Dist: requests
-Requires-Dist: scikit-rf
-Requires-Dist: matplotlib
-Requires-Dist: numpy
-Requires-Dist: gdspy
-Requires-Dist: meshio
-Requires-Dist: pyvista
-Requires-Dist: pyvistaqt
-Dynamic: license-file
-
-# Python GUI for gds2palace 
-
-![Intro](https://raw.githubusercontent.com/VolkerMuehlhaus/setupEM/main/doc/png/setupEM_banner.png)
-
-## Install
-
-    pip install setupEM
-
-**Full documentation, installation guide, and usage walkthrough:**
-https://github.com/VolkerMuehlhaus/setupEM
-
-## Recent changes
-
-# What's New - October 17, 2026
-
-**Conductor model** replaces **Conductor meshing** on the Mesh and Boundaries tab (Palace only), with a third choice: **Surface impedance** (default, as before), **Solve inside (volume mesh)** and the new **Solve inside + skin layers**, which adds thin layers along the conductor faces for accurate Q and loss at high frequency. Generated model scripts now use `settings['conductor_model']` instead of `settings['filled_metals']`. Older projects and model scripts with `filled_metals` still load. setupEM now requires gds2palace 0.9.0 or later; `pip install --upgrade setupEM` updates it.
-
-# What's New - October 16, 2026
-
-**Boundary conditions per side:** **Advanced...** next to **Boundary conditions** on the Mesh and Boundaries tab opens a table with the six sides of the simulation box. Each side can have its own boundary condition (**Absorbing**, **PEC** or **PMC**) and air layer thickness; a blank entry uses the value from the tab. For example, **PEC** at zmin with 0 µm air models a backside ground plane at the box boundary. This replaces the "same on all sides / different per side" choice for the air layer, which now lives in the same table.
-
-Loading a model with different boundary conditions per side no longer changes it to one condition for all sides: before, a single **PEC** side turned all six sides into PEC.
-
-**Stackup Editor:** while the stackup has errors, the cross-section preview can't be redrawn and keeps the last valid drawing. It is now marked as not up to date: dimmed, crossed by a thin red line, with a banner above it. **Show errors** in the banner opens the editor's XML Preview tab, which lists the errors. The status line now points there too, instead of to Save.
-
-# What's New - October 12, 2026
-
-**3D Field Viewer: value markers.** Check **Probe** in the View box (or press **P**), then click the model to place a numbered marker with the field value at that exact point. Clicking works from any angle, on the full model, the clipped solid, its cut face or the **2D plane only** section; dragging still rotates. Markers are drawn on top of the model, so a marker on a buried body stays visible. A **Markers** list opens beside the view with the marker number, value and x / y / z in µm, plus **Remove**, **Clear** and **Copy** (tab-separated, for spreadsheets). For Elmer thermal temperatures, a dropdown switches the list and labels between **K**, **°C** and **ΔT** (rise above the lowest temperature in the model, in K). Right-click the model for **Jump to Maximum in Cut Plane** (with the clip plane on), **Jump to Maximum on Surface of Body N** (the outer surface of the body you clicked, e.g. the chip; results without body IDs use the whole shown surface), **Add Marker Here**, **Remove Marker N** and **Clear Markers**. Markers are updated when you change the field, result file or cycle; markers outside the new model are removed. Ported from EMStudio's field viewer.
-
-**3D Field Viewer: keys.** With the 3D view focused: **R / F / Home** reset camera, **I** isometric, **X / Y / Z** axis views (**Shift**: negative side), **+ / −** zoom, arrow keys pan, **O** parallel projection, **M** find max., **A** arrows on/off, **P** probe, **PgUp / PgDn** move the clip plane. VTK's own letter keys (e.g. **w** wireframe, **3** stereo, **q** / **e** which stopped the interactor) no longer do anything. The right-click menu now opens only on a click: a right-drag zooms without the menu popping up afterwards.
-
-**3D Field Viewer:** the **Cycle** picker of a Palace field dump showed Palace's extra AMR error-indicator cycle as a frequency, e.g. "999 GHz (cycle 2)". It is now listed as "error indicator (cycle 2)". This happened when that cycle stores its Indicator/Rank values as point data. Dumps that store them as cell data were already listed as "geometry".
-
-**3D Field Viewer:** running `field_viewer.py` / `fieldViewer` standalone with a window failed in Python environments that also have PyQt5 installed. Fixed.
-
-**Port de-embedding in `scripts/combine_extend_snp.py` fixed** (the `_deembedded.sNp` and `_dc_deembedded.sNp` files): the negative inductance of all ports was put in series at port 1, and the other ports were not de-embedded. For a 3-port, port 1 got the sum of all three values. Now each port gets the value for its own port number; a port without geometry data in `port_information.json` is not de-embedded. The raw `.sNp` and the `_dc.sNp` files were not affected. Please run `combine_snp` again to create the de-embedded files again. The same bug was fixed in gds2palace, where Gianluca Simone and David Lurz (FAU) found it.
-
-Full history: [CHANGES.md](https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md)
-
----
-
-**Note:** the `setupEM` PyPI package itself requires:
-
-- gds2palace>=0.9.0
-- gds_prepare_for_EM>=1.3.0
-- PySide6
-- shiboken6
-- scipy
-- requests
-- scikit-rf
-- matplotlib
-- numpy
-- gdspy
-- meshio
-- pyvista
-- pyvistaqt
-
-(Other Python modules mentioned above are only needed to run standalone helper scripts in this repository, not to use the installed package.)

setupem-0.14.0/README_pypi.md

@@ -1,58 +0,0 @@
-# Python GUI for gds2palace 
-
-![Intro](https://raw.githubusercontent.com/VolkerMuehlhaus/setupEM/main/doc/png/setupEM_banner.png)
-
-## Install
-
-    pip install setupEM
-
-**Full documentation, installation guide, and usage walkthrough:**
-https://github.com/VolkerMuehlhaus/setupEM
-
-## Recent changes
-
-# What's New - October 17, 2026
-
-**Conductor model** replaces **Conductor meshing** on the Mesh and Boundaries tab (Palace only), with a third choice: **Surface impedance** (default, as before), **Solve inside (volume mesh)** and the new **Solve inside + skin layers**, which adds thin layers along the conductor faces for accurate Q and loss at high frequency. Generated model scripts now use `settings['conductor_model']` instead of `settings['filled_metals']`. Older projects and model scripts with `filled_metals` still load. setupEM now requires gds2palace 0.9.0 or later; `pip install --upgrade setupEM` updates it.
-
-# What's New - October 16, 2026
-
-**Boundary conditions per side:** **Advanced...** next to **Boundary conditions** on the Mesh and Boundaries tab opens a table with the six sides of the simulation box. Each side can have its own boundary condition (**Absorbing**, **PEC** or **PMC**) and air layer thickness; a blank entry uses the value from the tab. For example, **PEC** at zmin with 0 µm air models a backside ground plane at the box boundary. This replaces the "same on all sides / different per side" choice for the air layer, which now lives in the same table.
-
-Loading a model with different boundary conditions per side no longer changes it to one condition for all sides: before, a single **PEC** side turned all six sides into PEC.
-
-**Stackup Editor:** while the stackup has errors, the cross-section preview can't be redrawn and keeps the last valid drawing. It is now marked as not up to date: dimmed, crossed by a thin red line, with a banner above it. **Show errors** in the banner opens the editor's XML Preview tab, which lists the errors. The status line now points there too, instead of to Save.
-
-# What's New - October 12, 2026
-
-**3D Field Viewer: value markers.** Check **Probe** in the View box (or press **P**), then click the model to place a numbered marker with the field value at that exact point. Clicking works from any angle, on the full model, the clipped solid, its cut face or the **2D plane only** section; dragging still rotates. Markers are drawn on top of the model, so a marker on a buried body stays visible. A **Markers** list opens beside the view with the marker number, value and x / y / z in µm, plus **Remove**, **Clear** and **Copy** (tab-separated, for spreadsheets). For Elmer thermal temperatures, a dropdown switches the list and labels between **K**, **°C** and **ΔT** (rise above the lowest temperature in the model, in K). Right-click the model for **Jump to Maximum in Cut Plane** (with the clip plane on), **Jump to Maximum on Surface of Body N** (the outer surface of the body you clicked, e.g. the chip; results without body IDs use the whole shown surface), **Add Marker Here**, **Remove Marker N** and **Clear Markers**. Markers are updated when you change the field, result file or cycle; markers outside the new model are removed. Ported from EMStudio's field viewer.
-
-**3D Field Viewer: keys.** With the 3D view focused: **R / F / Home** reset camera, **I** isometric, **X / Y / Z** axis views (**Shift**: negative side), **+ / −** zoom, arrow keys pan, **O** parallel projection, **M** find max., **A** arrows on/off, **P** probe, **PgUp / PgDn** move the clip plane. VTK's own letter keys (e.g. **w** wireframe, **3** stereo, **q** / **e** which stopped the interactor) no longer do anything. The right-click menu now opens only on a click: a right-drag zooms without the menu popping up afterwards.
-
-**3D Field Viewer:** the **Cycle** picker of a Palace field dump showed Palace's extra AMR error-indicator cycle as a frequency, e.g. "999 GHz (cycle 2)". It is now listed as "error indicator (cycle 2)". This happened when that cycle stores its Indicator/Rank values as point data. Dumps that store them as cell data were already listed as "geometry".
-
-**3D Field Viewer:** running `field_viewer.py` / `fieldViewer` standalone with a window failed in Python environments that also have PyQt5 installed. Fixed.
-
-**Port de-embedding in `scripts/combine_extend_snp.py` fixed** (the `_deembedded.sNp` and `_dc_deembedded.sNp` files): the negative inductance of all ports was put in series at port 1, and the other ports were not de-embedded. For a 3-port, port 1 got the sum of all three values. Now each port gets the value for its own port number; a port without geometry data in `port_information.json` is not de-embedded. The raw `.sNp` and the `_dc.sNp` files were not affected. Please run `combine_snp` again to create the de-embedded files again. The same bug was fixed in gds2palace, where Gianluca Simone and David Lurz (FAU) found it.
-
-Full history: [CHANGES.md](https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md)
-
----
-
-**Note:** the `setupEM` PyPI package itself requires:
-
-- gds2palace>=0.9.0
-- gds_prepare_for_EM>=1.3.0
-- PySide6
-- shiboken6
-- scipy
-- requests
-- scikit-rf
-- matplotlib
-- numpy
-- gdspy
-- meshio
-- pyvista
-- pyvistaqt
-
-(Other Python modules mentioned above are only needed to run standalone helper scripts in this repository, not to use the installed package.)

setupem-0.14.0/src/setupEM.egg-info/PKG-INFO

@@ -1,85 +0,0 @@
-Metadata-Version: 2.4
-Name: setupEM
-Version: 0.14.0
-Summary: Python tool for configuration of gds2palace workflow with GUI.
-Author-email: Volker Muehlhaus <volker@muehlhaus.com>
-License-Expression: GPL-3.0-or-later
-Project-URL: Homepage, https://github.com/VolkerMuehlhaus/setupEM
-Project-URL: Repository, https://github.com/VolkerMuehlhaus/setupEM
-Project-URL: Changelog, https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md
-Requires-Python: >=3.9
-Description-Content-Type: text/markdown
-License-File: LICENSE
-Requires-Dist: gds2palace>=0.9.0
-Requires-Dist: gds_prepare_for_EM>=1.3.0
-Requires-Dist: PySide6
-Requires-Dist: shiboken6
-Requires-Dist: scipy
-Requires-Dist: requests
-Requires-Dist: scikit-rf
-Requires-Dist: matplotlib
-Requires-Dist: numpy
-Requires-Dist: gdspy
-Requires-Dist: meshio
-Requires-Dist: pyvista
-Requires-Dist: pyvistaqt
-Dynamic: license-file
-
-# Python GUI for gds2palace 
-
-![Intro](https://raw.githubusercontent.com/VolkerMuehlhaus/setupEM/main/doc/png/setupEM_banner.png)
-
-## Install
-
-    pip install setupEM
-
-**Full documentation, installation guide, and usage walkthrough:**
-https://github.com/VolkerMuehlhaus/setupEM
-
-## Recent changes
-
-# What's New - October 17, 2026
-
-**Conductor model** replaces **Conductor meshing** on the Mesh and Boundaries tab (Palace only), with a third choice: **Surface impedance** (default, as before), **Solve inside (volume mesh)** and the new **Solve inside + skin layers**, which adds thin layers along the conductor faces for accurate Q and loss at high frequency. Generated model scripts now use `settings['conductor_model']` instead of `settings['filled_metals']`. Older projects and model scripts with `filled_metals` still load. setupEM now requires gds2palace 0.9.0 or later; `pip install --upgrade setupEM` updates it.
-
-# What's New - October 16, 2026
-
-**Boundary conditions per side:** **Advanced...** next to **Boundary conditions** on the Mesh and Boundaries tab opens a table with the six sides of the simulation box. Each side can have its own boundary condition (**Absorbing**, **PEC** or **PMC**) and air layer thickness; a blank entry uses the value from the tab. For example, **PEC** at zmin with 0 µm air models a backside ground plane at the box boundary. This replaces the "same on all sides / different per side" choice for the air layer, which now lives in the same table.
-
-Loading a model with different boundary conditions per side no longer changes it to one condition for all sides: before, a single **PEC** side turned all six sides into PEC.
-
-**Stackup Editor:** while the stackup has errors, the cross-section preview can't be redrawn and keeps the last valid drawing. It is now marked as not up to date: dimmed, crossed by a thin red line, with a banner above it. **Show errors** in the banner opens the editor's XML Preview tab, which lists the errors. The status line now points there too, instead of to Save.
-
-# What's New - October 12, 2026
-
-**3D Field Viewer: value markers.** Check **Probe** in the View box (or press **P**), then click the model to place a numbered marker with the field value at that exact point. Clicking works from any angle, on the full model, the clipped solid, its cut face or the **2D plane only** section; dragging still rotates. Markers are drawn on top of the model, so a marker on a buried body stays visible. A **Markers** list opens beside the view with the marker number, value and x / y / z in µm, plus **Remove**, **Clear** and **Copy** (tab-separated, for spreadsheets). For Elmer thermal temperatures, a dropdown switches the list and labels between **K**, **°C** and **ΔT** (rise above the lowest temperature in the model, in K). Right-click the model for **Jump to Maximum in Cut Plane** (with the clip plane on), **Jump to Maximum on Surface of Body N** (the outer surface of the body you clicked, e.g. the chip; results without body IDs use the whole shown surface), **Add Marker Here**, **Remove Marker N** and **Clear Markers**. Markers are updated when you change the field, result file or cycle; markers outside the new model are removed. Ported from EMStudio's field viewer.
-
-**3D Field Viewer: keys.** With the 3D view focused: **R / F / Home** reset camera, **I** isometric, **X / Y / Z** axis views (**Shift**: negative side), **+ / −** zoom, arrow keys pan, **O** parallel projection, **M** find max., **A** arrows on/off, **P** probe, **PgUp / PgDn** move the clip plane. VTK's own letter keys (e.g. **w** wireframe, **3** stereo, **q** / **e** which stopped the interactor) no longer do anything. The right-click menu now opens only on a click: a right-drag zooms without the menu popping up afterwards.
-
-**3D Field Viewer:** the **Cycle** picker of a Palace field dump showed Palace's extra AMR error-indicator cycle as a frequency, e.g. "999 GHz (cycle 2)". It is now listed as "error indicator (cycle 2)". This happened when that cycle stores its Indicator/Rank values as point data. Dumps that store them as cell data were already listed as "geometry".
-
-**3D Field Viewer:** running `field_viewer.py` / `fieldViewer` standalone with a window failed in Python environments that also have PyQt5 installed. Fixed.
-
-**Port de-embedding in `scripts/combine_extend_snp.py` fixed** (the `_deembedded.sNp` and `_dc_deembedded.sNp` files): the negative inductance of all ports was put in series at port 1, and the other ports were not de-embedded. For a 3-port, port 1 got the sum of all three values. Now each port gets the value for its own port number; a port without geometry data in `port_information.json` is not de-embedded. The raw `.sNp` and the `_dc.sNp` files were not affected. Please run `combine_snp` again to create the de-embedded files again. The same bug was fixed in gds2palace, where Gianluca Simone and David Lurz (FAU) found it.
-
-Full history: [CHANGES.md](https://github.com/VolkerMuehlhaus/setupEM/blob/main/doc/CHANGES.md)
-
----
-
-**Note:** the `setupEM` PyPI package itself requires:
-
-- gds2palace>=0.9.0
-- gds_prepare_for_EM>=1.3.0
-- PySide6
-- shiboken6
-- scipy
-- requests
-- scikit-rf
-- matplotlib
-- numpy
-- gdspy
-- meshio
-- pyvista
-- pyvistaqt
-
-(Other Python modules mentioned above are only needed to run standalone helper scripts in this repository, not to use the installed package.)