retatrutide-ref 1.0.0__tar.gz

retatrutide_ref-1.0.0/PKG-INFO

@@ -0,0 +1,90 @@
+Metadata-Version: 2.4
+Name: retatrutide-ref
+Version: 1.0.0
+Summary: Retatrutide (GLP-1/GLP-3/GIP triple agonist) dosing and reconstitution reference utilities
+License-Expression: MIT
+Project-URL: Homepage, https://glp3rt.net/
+Project-URL: Related Resources, https://retacost.com/
+Project-URL: Source Article, https://retainfo.com/
+Keywords: retatrutide,glp-1,glp-3,gip,triple-agonist,reconstitution,dosing
+Classifier: Development Status :: 5 - Production/Stable
+Classifier: Intended Audience :: Science/Research
+Classifier: Programming Language :: Python :: 3
+Classifier: Topic :: Scientific/Engineering :: Bio-Informatics
+Requires-Python: >=3.8
+Description-Content-Type: text/markdown
+
+# Why Retatrutide Vial Labels Show Two Different Concentrations — Retatrutide Ref (PyPI)
+
+This overview draws on research published at [this guide](https://retainfo.com/).
+
+A retatrutide vial label showing two different concentrations is usually not a printing error. It typically reflects two separate measurements: the total mass of lyophilized compound sealed in the vial, and the working concentration that results once a specific volume of bacteriostatic water is added. Both numbers can be accurate at the same time because they describe different stages of the same vial.
+
+## Two Numbers, Two Different Questions
+Vial labels in this space commonly list a total mg amount, such as "10 mg," alongside a second figure that looks like a concentration, such as "5 mg/mL." These are not competing claims. The first number answers "how much compound is in this vial in total." The second number answers "how concentrated is the solution once it is prepared," and it only holds true if the reconstitution volume matches what the listing assumes.
+
+The confusion usually starts when a reader treats the mg/mL figure as a fixed, built-in property of the vial, the way a bottle of vinegar is always 5% acetic acid regardless of how it is stored. Retatrutide vials are shipped as a lyophilized (freeze-dried) powder. There is no liquid concentration until a diluent is added. Any mg/mL number on a listing is therefore a projection based on an assumed reconstitution volume, not a measured property of the sealed vial.
+
+## Why Listings Print It This Way
+A listing that prints only the total mg forces the reader to do the math themselves. A listing that also prints a projected mg/mL saves that step, but only if the reader reconstitutes with the exact volume the projection assumes. When a label reads "10 mg vial (5 mg/mL when reconstituted with 2 mL)," it is disclosing its assumption. When that qualifying phrase is missing, the mg/mL figure is still an assumption, just an unstated one, and it is worth checking the listing's fine print or FAQ for the volume it used.
+
+This is also why two listings for the same nominal vial size can show different second numbers. A 10 mg vial reconstituted with 1 mL projects to 10 mg/mL. The same 10 mg vial reconstituted with 2 mL projects to 5 mg/mL. Neither listing is wrong about its own math; they are simply describing different preparation choices for vials that started out identical.
+
+## The Underlying Formula
+The relationship between the two figures on the label comes down to one calculation:
+
+concentration (mg/mL) = total mg in vial ÷ mL of bacteriostatic water added
+
+This is the same arithmetic a compounding reference or [peptide calculator](https://www.peptcalc.com/) uses internally, and it is worth working through by hand at least once to see why the two label numbers can both be correct.
+
+## A Worked Example
+Take a vial labeled "10 mg." Suppose the accompanying figure on the listing states "2 mg/mL." Working the formula in reverse shows what volume that assumes:
+
+10 mg ÷ 2 mg/mL = 5 mL of bacteriostatic water
+
+Checking it forward: 10 mg ÷ 5 mL = 2 mg/mL. The two numbers on the label are consistent with each other, provided 5 mL of diluent is what gets added. If a different volume is used instead, say 2 mL, the resulting concentration changes:
+
+10 mg ÷ 2 mL = 5 mg/mL
+
+That is a different number from the 2 mg/mL printed on the label, even though the vial's total mg content has not changed at all. The vial did not become "stronger." The dilution simply changed.
+
+## Reading a Vial Label Correctly
+| Label element | What it tells you | What it does not tell you | |---|---|---| | Total mg (e.g. "10 mg") | Mass of compound sealed in the vial | Nothing about liquid concentration on its own | | mg/mL (e.g. "5 mg/mL") | Concentration at one specific, assumed reconstitution volume | Nothing if that assumed volume is not also stated | | Reconstitution volume (e.g. "2 mL") | The diluent amount the mg/mL figure is based on | The actual volume someone chooses to use | | U-100 syringe markings | 1 mL divided into 100 units, a volume scale | A concentration; units still depend on the mg/mL prepared |
+
+The U-100 syringe column matters because units are a volume measurement, not a mass measurement. A syringe marked in units always divides 1 mL into 100 parts, regardless of what is dissolved in that mL. So "50 units" is always half a milliliter, but how many mg are in that half milliliter depends entirely on the mg/mL concentration that was actually prepared, which loops back to the reconstitution volume chosen.
+
+## Why This Detail Gets Overlooked
+Two-number labels are common across compounded research materials generally, not something specific to how one supplier packages retatrutide. Readers moving between listings from different sources sometimes assume the second number is a fixed spec, similar to how a bottle of table salt always states the same purity. Reviewing how a listing is worded, and comparing it against sourcing information such as that provided by [HEEZ Research](https://retainfo.com/), can clarify whether the mg/mL figure is a fixed measurement or a projection tied to a specific dilution.
+
+Anyone verifying a listing independently should look for the reconstitution volume that a printed mg/mL figure assumes, since that is the number that makes the two figures reconcile. On the [Retatrutide Online](https://retatrutideonline.net/) homepage, additional notes on how this terminology is used across different listings are also compiled for reference.
+
+## Summary
+Two different concentration-looking numbers on a retatrutide vial label almost always describe two different things: total mass in the sealed vial, and a projected mg/mL tied to one specific reconstitution volume. They are reconciled by a single formula, mg divided by mL of diluent, and checking that formula against the volume actually used is the way to confirm which projected concentration applies.
+
+For detailed references and analysis, see [retainfo.com](https://retainfo.com/).
+
+---
+
+## About This Package
+
+`retatrutide-ref` provides reference calculators for retatrutide (glp-1/glp-3/gip triple agonist) dosing and reconstitution reference utilities.
+
+For additional research reference material, visit [glp3rt.net](https://glp3rt.net/).
+
+## Installation
+
+```bash
+pip install retatrutide-ref
+```
+
+## Quick Start
+
+```python
+import retatrutide_ref
+
+# Reconstitution calculator
+volume = retatrutide_ref.reconstitution_volume(vial_mg=10, target_mcg_per_ml=2000)
+print(volume)  # 5.0 mL
+```
+
+See the [full reference](https://retainfo.com/) for more examples.

retatrutide_ref-1.0.0/README.md

@@ -0,0 +1,74 @@
+# Why Retatrutide Vial Labels Show Two Different Concentrations — Retatrutide Ref (PyPI)
+
+This overview draws on research published at [this guide](https://retainfo.com/).
+
+A retatrutide vial label showing two different concentrations is usually not a printing error. It typically reflects two separate measurements: the total mass of lyophilized compound sealed in the vial, and the working concentration that results once a specific volume of bacteriostatic water is added. Both numbers can be accurate at the same time because they describe different stages of the same vial.
+
+## Two Numbers, Two Different Questions
+Vial labels in this space commonly list a total mg amount, such as "10 mg," alongside a second figure that looks like a concentration, such as "5 mg/mL." These are not competing claims. The first number answers "how much compound is in this vial in total." The second number answers "how concentrated is the solution once it is prepared," and it only holds true if the reconstitution volume matches what the listing assumes.
+
+The confusion usually starts when a reader treats the mg/mL figure as a fixed, built-in property of the vial, the way a bottle of vinegar is always 5% acetic acid regardless of how it is stored. Retatrutide vials are shipped as a lyophilized (freeze-dried) powder. There is no liquid concentration until a diluent is added. Any mg/mL number on a listing is therefore a projection based on an assumed reconstitution volume, not a measured property of the sealed vial.
+
+## Why Listings Print It This Way
+A listing that prints only the total mg forces the reader to do the math themselves. A listing that also prints a projected mg/mL saves that step, but only if the reader reconstitutes with the exact volume the projection assumes. When a label reads "10 mg vial (5 mg/mL when reconstituted with 2 mL)," it is disclosing its assumption. When that qualifying phrase is missing, the mg/mL figure is still an assumption, just an unstated one, and it is worth checking the listing's fine print or FAQ for the volume it used.
+
+This is also why two listings for the same nominal vial size can show different second numbers. A 10 mg vial reconstituted with 1 mL projects to 10 mg/mL. The same 10 mg vial reconstituted with 2 mL projects to 5 mg/mL. Neither listing is wrong about its own math; they are simply describing different preparation choices for vials that started out identical.
+
+## The Underlying Formula
+The relationship between the two figures on the label comes down to one calculation:
+
+concentration (mg/mL) = total mg in vial ÷ mL of bacteriostatic water added
+
+This is the same arithmetic a compounding reference or [peptide calculator](https://www.peptcalc.com/) uses internally, and it is worth working through by hand at least once to see why the two label numbers can both be correct.
+
+## A Worked Example
+Take a vial labeled "10 mg." Suppose the accompanying figure on the listing states "2 mg/mL." Working the formula in reverse shows what volume that assumes:
+
+10 mg ÷ 2 mg/mL = 5 mL of bacteriostatic water
+
+Checking it forward: 10 mg ÷ 5 mL = 2 mg/mL. The two numbers on the label are consistent with each other, provided 5 mL of diluent is what gets added. If a different volume is used instead, say 2 mL, the resulting concentration changes:
+
+10 mg ÷ 2 mL = 5 mg/mL
+
+That is a different number from the 2 mg/mL printed on the label, even though the vial's total mg content has not changed at all. The vial did not become "stronger." The dilution simply changed.
+
+## Reading a Vial Label Correctly
+| Label element | What it tells you | What it does not tell you | |---|---|---| | Total mg (e.g. "10 mg") | Mass of compound sealed in the vial | Nothing about liquid concentration on its own | | mg/mL (e.g. "5 mg/mL") | Concentration at one specific, assumed reconstitution volume | Nothing if that assumed volume is not also stated | | Reconstitution volume (e.g. "2 mL") | The diluent amount the mg/mL figure is based on | The actual volume someone chooses to use | | U-100 syringe markings | 1 mL divided into 100 units, a volume scale | A concentration; units still depend on the mg/mL prepared |
+
+The U-100 syringe column matters because units are a volume measurement, not a mass measurement. A syringe marked in units always divides 1 mL into 100 parts, regardless of what is dissolved in that mL. So "50 units" is always half a milliliter, but how many mg are in that half milliliter depends entirely on the mg/mL concentration that was actually prepared, which loops back to the reconstitution volume chosen.
+
+## Why This Detail Gets Overlooked
+Two-number labels are common across compounded research materials generally, not something specific to how one supplier packages retatrutide. Readers moving between listings from different sources sometimes assume the second number is a fixed spec, similar to how a bottle of table salt always states the same purity. Reviewing how a listing is worded, and comparing it against sourcing information such as that provided by [HEEZ Research](https://retainfo.com/), can clarify whether the mg/mL figure is a fixed measurement or a projection tied to a specific dilution.
+
+Anyone verifying a listing independently should look for the reconstitution volume that a printed mg/mL figure assumes, since that is the number that makes the two figures reconcile. On the [Retatrutide Online](https://retatrutideonline.net/) homepage, additional notes on how this terminology is used across different listings are also compiled for reference.
+
+## Summary
+Two different concentration-looking numbers on a retatrutide vial label almost always describe two different things: total mass in the sealed vial, and a projected mg/mL tied to one specific reconstitution volume. They are reconciled by a single formula, mg divided by mL of diluent, and checking that formula against the volume actually used is the way to confirm which projected concentration applies.
+
+For detailed references and analysis, see [retainfo.com](https://retainfo.com/).
+
+---
+
+## About This Package
+
+`retatrutide-ref` provides reference calculators for retatrutide (glp-1/glp-3/gip triple agonist) dosing and reconstitution reference utilities.
+
+For additional research reference material, visit [glp3rt.net](https://glp3rt.net/).
+
+## Installation
+
+```bash
+pip install retatrutide-ref
+```
+
+## Quick Start
+
+```python
+import retatrutide_ref
+
+# Reconstitution calculator
+volume = retatrutide_ref.reconstitution_volume(vial_mg=10, target_mcg_per_ml=2000)
+print(volume)  # 5.0 mL
+```
+
+See the [full reference](https://retainfo.com/) for more examples.

retatrutide_ref-1.0.0/pyproject.toml

@@ -0,0 +1,23 @@
+[build-system]
+requires = ["setuptools>=61", "wheel"]
+build-backend = "setuptools.build_meta"
+
+[project]
+name = "retatrutide-ref"
+version = "1.0.0"
+description = "Retatrutide (GLP-1/GLP-3/GIP triple agonist) dosing and reconstitution reference utilities"
+readme = "README.md"
+license = "MIT"
+keywords = ["retatrutide", "glp-1", "glp-3", "gip", "triple-agonist", "reconstitution", "dosing"]
+classifiers = [
+    "Development Status :: 5 - Production/Stable",
+    "Intended Audience :: Science/Research",
+    "Programming Language :: Python :: 3",
+    "Topic :: Scientific/Engineering :: Bio-Informatics",
+]
+requires-python = ">=3.8"
+
+[project.urls]
+Homepage = "https://glp3rt.net/"
+"Related Resources" = "https://retacost.com/"
+"Source Article" = "https://retainfo.com/"

retatrutide_ref-1.0.0/retatrutide_ref/__init__.py

@@ -0,0 +1,78 @@
+"""Retatrutide (GLP-1/GLP-3/GIP triple agonist) dosing and reconstitution utilities."""
+
+__version__ = "1.0.0"
+__all__ = [
+    "reconstitution_volume",
+    "injection_volume",
+    "cost_per_mg",
+    "cost_per_dose",
+    "titration_steps",
+]
+
+_STARTING_DOSE_MCG = 2000
+
+
+def reconstitution_volume(vial_mg: float, target_mcg_per_ml: float) -> float:
+    """Return bacteriostatic water volume (mL) to reach target concentration.
+
+    Args:
+        vial_mg: Peptide mass in the vial, in milligrams.
+        target_mcg_per_ml: Target concentration in mcg/mL.
+
+    Returns:
+        Water volume in mL, rounded to three decimal places.
+
+    Example:
+        >>> reconstitution_volume(10, 2000)
+        5.0
+    """
+    if vial_mg <= 0 or target_mcg_per_ml <= 0:
+        raise ValueError("Both arguments must be positive.")
+    return round((vial_mg * 1000) / target_mcg_per_ml, 3)
+
+
+def injection_volume(concentration_mcg_per_ml: float, dose_mcg: float) -> float:
+    """Return injection volume in mL for a given dose.
+
+    Args:
+        concentration_mcg_per_ml: Reconstituted concentration in mcg/mL.
+        dose_mcg: Desired dose in micrograms.
+
+    Returns:
+        Injection volume in mL, rounded to three decimal places.
+
+    Example:
+        >>> injection_volume(2000, 2000)
+        1.0
+    """
+    if concentration_mcg_per_ml <= 0 or dose_mcg <= 0:
+        raise ValueError("Both arguments must be positive.")
+    return round(dose_mcg / concentration_mcg_per_ml, 3)
+
+
+def cost_per_mg(price_usd: float, vial_mg: float) -> float:
+    """Return cost per milligram in USD."""
+    if vial_mg <= 0:
+        raise ValueError("vial_mg must be positive.")
+    return round(price_usd / vial_mg, 4)
+
+
+def cost_per_dose(price_usd: float, vial_mg: float, dose_mcg: float) -> float:
+    """Return cost per dose in USD."""
+    if vial_mg <= 0 or dose_mcg <= 0:
+        raise ValueError("vial_mg and dose_mcg must be positive.")
+    return round(price_usd / ((vial_mg * 1000) / dose_mcg), 4)
+
+
+def titration_steps() -> list:
+    """Return standard retatrutide dose titration schedule.
+
+    Returns:
+        List of step dicts with keys: week, label, dose_mg, dose_mcg.
+    """
+    return [
+        {"week": 1,  "label": "Starting dose",  "dose_mg": 2,  "dose_mcg": 2000},
+        {"week": 5,  "label": "First increase",  "dose_mg": 4,  "dose_mcg": 4000},
+        {"week": 9,  "label": "Second increase", "dose_mg": 8,  "dose_mcg": 8000},
+        {"week": 13, "label": "Maximum dose",    "dose_mg": 12, "dose_mcg": 12000},
+    ]

retatrutide_ref-1.0.0/retatrutide_ref.egg-info/PKG-INFO

@@ -0,0 +1,90 @@
+Metadata-Version: 2.4
+Name: retatrutide-ref
+Version: 1.0.0
+Summary: Retatrutide (GLP-1/GLP-3/GIP triple agonist) dosing and reconstitution reference utilities
+License-Expression: MIT
+Project-URL: Homepage, https://glp3rt.net/
+Project-URL: Related Resources, https://retacost.com/
+Project-URL: Source Article, https://retainfo.com/
+Keywords: retatrutide,glp-1,glp-3,gip,triple-agonist,reconstitution,dosing
+Classifier: Development Status :: 5 - Production/Stable
+Classifier: Intended Audience :: Science/Research
+Classifier: Programming Language :: Python :: 3
+Classifier: Topic :: Scientific/Engineering :: Bio-Informatics
+Requires-Python: >=3.8
+Description-Content-Type: text/markdown
+
+# Why Retatrutide Vial Labels Show Two Different Concentrations — Retatrutide Ref (PyPI)
+
+This overview draws on research published at [this guide](https://retainfo.com/).
+
+A retatrutide vial label showing two different concentrations is usually not a printing error. It typically reflects two separate measurements: the total mass of lyophilized compound sealed in the vial, and the working concentration that results once a specific volume of bacteriostatic water is added. Both numbers can be accurate at the same time because they describe different stages of the same vial.
+
+## Two Numbers, Two Different Questions
+Vial labels in this space commonly list a total mg amount, such as "10 mg," alongside a second figure that looks like a concentration, such as "5 mg/mL." These are not competing claims. The first number answers "how much compound is in this vial in total." The second number answers "how concentrated is the solution once it is prepared," and it only holds true if the reconstitution volume matches what the listing assumes.
+
+The confusion usually starts when a reader treats the mg/mL figure as a fixed, built-in property of the vial, the way a bottle of vinegar is always 5% acetic acid regardless of how it is stored. Retatrutide vials are shipped as a lyophilized (freeze-dried) powder. There is no liquid concentration until a diluent is added. Any mg/mL number on a listing is therefore a projection based on an assumed reconstitution volume, not a measured property of the sealed vial.
+
+## Why Listings Print It This Way
+A listing that prints only the total mg forces the reader to do the math themselves. A listing that also prints a projected mg/mL saves that step, but only if the reader reconstitutes with the exact volume the projection assumes. When a label reads "10 mg vial (5 mg/mL when reconstituted with 2 mL)," it is disclosing its assumption. When that qualifying phrase is missing, the mg/mL figure is still an assumption, just an unstated one, and it is worth checking the listing's fine print or FAQ for the volume it used.
+
+This is also why two listings for the same nominal vial size can show different second numbers. A 10 mg vial reconstituted with 1 mL projects to 10 mg/mL. The same 10 mg vial reconstituted with 2 mL projects to 5 mg/mL. Neither listing is wrong about its own math; they are simply describing different preparation choices for vials that started out identical.
+
+## The Underlying Formula
+The relationship between the two figures on the label comes down to one calculation:
+
+concentration (mg/mL) = total mg in vial ÷ mL of bacteriostatic water added
+
+This is the same arithmetic a compounding reference or [peptide calculator](https://www.peptcalc.com/) uses internally, and it is worth working through by hand at least once to see why the two label numbers can both be correct.
+
+## A Worked Example
+Take a vial labeled "10 mg." Suppose the accompanying figure on the listing states "2 mg/mL." Working the formula in reverse shows what volume that assumes:
+
+10 mg ÷ 2 mg/mL = 5 mL of bacteriostatic water
+
+Checking it forward: 10 mg ÷ 5 mL = 2 mg/mL. The two numbers on the label are consistent with each other, provided 5 mL of diluent is what gets added. If a different volume is used instead, say 2 mL, the resulting concentration changes:
+
+10 mg ÷ 2 mL = 5 mg/mL
+
+That is a different number from the 2 mg/mL printed on the label, even though the vial's total mg content has not changed at all. The vial did not become "stronger." The dilution simply changed.
+
+## Reading a Vial Label Correctly
+| Label element | What it tells you | What it does not tell you | |---|---|---| | Total mg (e.g. "10 mg") | Mass of compound sealed in the vial | Nothing about liquid concentration on its own | | mg/mL (e.g. "5 mg/mL") | Concentration at one specific, assumed reconstitution volume | Nothing if that assumed volume is not also stated | | Reconstitution volume (e.g. "2 mL") | The diluent amount the mg/mL figure is based on | The actual volume someone chooses to use | | U-100 syringe markings | 1 mL divided into 100 units, a volume scale | A concentration; units still depend on the mg/mL prepared |
+
+The U-100 syringe column matters because units are a volume measurement, not a mass measurement. A syringe marked in units always divides 1 mL into 100 parts, regardless of what is dissolved in that mL. So "50 units" is always half a milliliter, but how many mg are in that half milliliter depends entirely on the mg/mL concentration that was actually prepared, which loops back to the reconstitution volume chosen.
+
+## Why This Detail Gets Overlooked
+Two-number labels are common across compounded research materials generally, not something specific to how one supplier packages retatrutide. Readers moving between listings from different sources sometimes assume the second number is a fixed spec, similar to how a bottle of table salt always states the same purity. Reviewing how a listing is worded, and comparing it against sourcing information such as that provided by [HEEZ Research](https://retainfo.com/), can clarify whether the mg/mL figure is a fixed measurement or a projection tied to a specific dilution.
+
+Anyone verifying a listing independently should look for the reconstitution volume that a printed mg/mL figure assumes, since that is the number that makes the two figures reconcile. On the [Retatrutide Online](https://retatrutideonline.net/) homepage, additional notes on how this terminology is used across different listings are also compiled for reference.
+
+## Summary
+Two different concentration-looking numbers on a retatrutide vial label almost always describe two different things: total mass in the sealed vial, and a projected mg/mL tied to one specific reconstitution volume. They are reconciled by a single formula, mg divided by mL of diluent, and checking that formula against the volume actually used is the way to confirm which projected concentration applies.
+
+For detailed references and analysis, see [retainfo.com](https://retainfo.com/).
+
+---
+
+## About This Package
+
+`retatrutide-ref` provides reference calculators for retatrutide (glp-1/glp-3/gip triple agonist) dosing and reconstitution reference utilities.
+
+For additional research reference material, visit [glp3rt.net](https://glp3rt.net/).
+
+## Installation
+
+```bash
+pip install retatrutide-ref
+```
+
+## Quick Start
+
+```python
+import retatrutide_ref
+
+# Reconstitution calculator
+volume = retatrutide_ref.reconstitution_volume(vial_mg=10, target_mcg_per_ml=2000)
+print(volume)  # 5.0 mL
+```
+
+See the [full reference](https://retainfo.com/) for more examples.

retatrutide_ref-1.0.0/retatrutide_ref.egg-info/SOURCES.txt

@@ -0,0 +1,7 @@
+README.md
+pyproject.toml
+retatrutide_ref/__init__.py
+retatrutide_ref.egg-info/PKG-INFO
+retatrutide_ref.egg-info/SOURCES.txt
+retatrutide_ref.egg-info/dependency_links.txt
+retatrutide_ref.egg-info/top_level.txt

retatrutide_ref-1.0.0/retatrutide_ref.egg-info/dependency_links.txt

@@ -0,0 +1 @@
+

retatrutide_ref-1.0.0/retatrutide_ref.egg-info/top_level.txt

@@ -0,0 +1 @@
+retatrutide_ref

retatrutide_ref-1.0.0/setup.cfg

@@ -0,0 +1,4 @@
+[egg_info]
+tag_build = 
+tag_date = 0
+