pyflightstream 0.50.2__tar.gz → 0.51.0__tar.gz
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- {pyflightstream-0.50.2/src/pyflightstream.egg-info → pyflightstream-0.51.0}/PKG-INFO +2 -1
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/README.md +1 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/pyproject.toml +1 -1
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/_meta.yaml +26 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/acoustics.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/actuators.yaml +11 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/advanced_settings.yaml +18 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/aeroelastic_coupling.yaml +12 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/base_regions.yaml +10 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/boundary_conditions.yaml +11 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/cad.yaml +8 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/cad_create.yaml +38 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/ccs_fuselage_mesh.yaml +11 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/ccs_revolve_mesh.yaml +11 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/ccs_wing_mesh.yaml +13 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/coordinate_systems.yaml +11 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/file_io.yaml +8 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/free_surfaces.yaml +3 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/inlets_outlets.yaml +7 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/mesh_import_export.yaml +4 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/mesh_operations.yaml +19 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/mesh_unite.yaml +2 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/mesh_wrapper.yaml +11 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/motion_definitions.yaml +23 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/plots.yaml +2 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/probe_points.yaml +6 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/runtime_settings.yaml +12 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/scene_settings.yaml +6 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/scenes.yaml +13 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/script_controls.yaml +3 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/simulation_controls.yaml +5 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/solver_analysis.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/solver_contours.yaml +1 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/solver_export.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/solver_initialization.yaml +5 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/solver_settings.yaml +16 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/stability_toolbox.yaml +6 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/streamlines.yaml +12 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/surface_sections.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/sweeper.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/transition_trips.yaml +1 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/unsteady_solver.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/volume_sections.yaml +9 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/physics.py +8 -3
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/__init__.py +3 -5
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_build_forms.py +2 -2
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_marking.py +17 -2
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_audit.py +70 -5
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_geometry.py +84 -2
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_level.py +33 -11
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_lines.py +179 -29
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_obj.py +3 -2
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_remesh.py +95 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_remesh_group.py +74 -31
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/wake_edges.py +61 -4
- {pyflightstream-0.50.2 → pyflightstream-0.51.0/src/pyflightstream.egg-info}/PKG-INFO +2 -1
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/LICENSE +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/MANIFEST.in +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/setup.cfg +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_atmosphere.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_cli.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_console.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_decimal.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_deprecations.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_digest.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_errors.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_expressions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_fsi_calibration.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_fsm.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_fsm_fresh.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_lengths.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_maturity.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_mesh.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_progress.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_retired_names.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_signature.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_textio.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_tokens.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/_yamlflow.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_ccs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_farfield_spec.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_fsi_external.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_geometry_emit.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_geometry_instruction.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_matrix_layouts.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_matrix_upgrade.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_setup_keys.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_setup_link.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_skipped_families.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_sweep_names.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/_unsteady_actions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/acoustics.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/ccs_fuselage.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/ccs_revolution.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/ccs_wing.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/corrections.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/farfield_inputs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/field_coverage.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/freestream.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/fsi_workspace.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/matrix.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/mesh.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/naming.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/pproc.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/qsteady.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/reference_blocks.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/selection.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/settings.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/setup_surfaces.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/sixdof.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/windows.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_actuator.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_additional.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_batch_actions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_batch_script.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_clock.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_conventions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_export_first_step.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_exports.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_farfield.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_frames.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_freestream.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_gap_evidence.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_geometry.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_motion.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_names.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_pproc.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_probe_imports.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_probes.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_qsteady_rotor.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_reductions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_registry.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_rotor.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_row_cells.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_rows.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_sixdof.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_skeleton.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_solver_settings.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_steady.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_streamlines.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_timing.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_unsteady.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_vocabulary.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/cases/workflows/_wake_length.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/_schema.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/exceptions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/extras.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/farfield/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/farfield/balances.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/farfield/fields.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/farfield/quadrature.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/farfield/trefftz.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/_direct_morphing.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/beam.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/calibration.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/centrifugal.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/cli.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/config.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/driver.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/errors.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/external.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/kinematics.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/loads.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/materials.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/nodes.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/sections.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/state.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/fsi/wing.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/options.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/overview.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_additional.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_admit.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_condition.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_field_inputs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_installed_copies.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_matrix_template.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_noise_products.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_products_campaign.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_reduction_stage.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_rotor_plan.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_rotor_products.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_settings_product.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_sim.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_stage.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_structure.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_tables.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/_transfer_functions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/acoustics.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/axes.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/boundary_layer.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/corrections.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/custom_polar.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/diagnostics.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/disc_maps.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/equations.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/farfield_fields.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/farfield_products.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/field_frames.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/glossary.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/guides.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/harmonics.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/inflow_tools.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/input_template.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/point_tables.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/polar.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/probe_fields.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/products.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/provenance.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/qsteady.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/qsteady_noise.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/reductions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/rotor_table.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/section_distributions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/series.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/settings_table.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/streamlines.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/superfile.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/surfaces.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/unsteady.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/unsteady_polar.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/post/writers.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/_model.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/errors.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/geometry.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/lattice.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/layouts.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/probes/planar.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_reanalysis.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_0400_gap.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_0400_gapbase.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_0400_gapedges.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_0400_gapkit.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_0460_marking.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_26125.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_catalog_b.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_ccs_mesh.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_ccs_noise.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_kit.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/_spec_t1.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/cli.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/compat.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/cost.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/drift.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/errors.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/geometry.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/matrix.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/probes.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/PHY-01.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/PHY-02.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/PHY-05.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/PHY-06.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/SMI-01.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/SMI-02.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/pressure-drag/PHY-01.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/pressure-drag/PHY-02.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/pressure-drag/PHY-05.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/references/pressure-drag/PHY-06.yaml +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/reports.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/qa/specs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/reference.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/conditions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/core.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/exports.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/loads.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/log.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/native_surface.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/sectional_loads.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/surface.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/tables.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/results/wake.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_actions_counter.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_additional.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_alias.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_assemble.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_assessment.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_batch_collect.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_batch_exec.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_batch_plan.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_batch_run.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_batch_split.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_campaign.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_geometry.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_mesh.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_parsers.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_parsers_storage.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_print.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_query.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_query_history.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_cli_query_point.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_collect_logs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_collect_notes.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_continuation.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_continuation_frame.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_executors.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_field_motion.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_grouped.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_identity.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_ids.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_mark_converged.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_matrix_warnings.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_pending.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_plan.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_plan_report.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_points.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_rebuild.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_rebuild_evidence.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_rebuild_grouped.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_rebuild_summary.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_record_files.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_solver_windows.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_step_exports.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_sweep.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/_wake_edge_verdict.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/cli.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/collect.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/matrix.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/run/records.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_arg_checks.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_ledger_tables.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_phase_order.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_relaxed_te.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_settings.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_surface_averaging.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/_wake_edge_file.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/entities.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/helpers.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/motion.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/rotor_vocabulary.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/solver_setup.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/script/toggles.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/support.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/testing.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/utils/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/utils/cli.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/utils/database.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/utils/errors.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/utils/manual.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/versions.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_batch_life.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_batch_relocate.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_batches.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_degenerate.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_effective.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_free_space.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_build.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_clean.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_convert.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_instruction.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_record.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_sidecar.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_geometry_vtk.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_inspect_pages.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_layout.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_ledger_api.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_ledger_history.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_links.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_mark_boundaries.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_matrix_binding.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_matrix_homes.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_matrix_phases.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_missing_log.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_query_files.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_query_logs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_query_point.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/__init__.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_blocks.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_config.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_grid.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_layout.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_nastran.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_prepare.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_remesh_pairs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_refine/_staging.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_row_setup.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_script_comparison.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_settings_file.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_step_prune.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_verdicts.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/_visual_inspect.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/actuator_profiles.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/builds.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/cli.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/costs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/excel.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/excel_bridge.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/excel_file.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/excel_sync.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/fields.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/flight_condition.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/fsi_external_setup.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/fsi_setup.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/hpc.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/inputs.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/ledger.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/manifest.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/matrix.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/migrate.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/naming.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/record_document.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/selections.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/setup_inspection.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/setup_standards.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/sidecars.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/sixdof_setup.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/storage.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/workspace/trailing_edges.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream.egg-info/SOURCES.txt +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream.egg-info/dependency_links.txt +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream.egg-info/entry_points.txt +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream.egg-info/requires.txt +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream.egg-info/top_level.txt +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/tools/check_shipped_surface.py +0 -0
- {pyflightstream-0.50.2 → pyflightstream-0.51.0}/tools/shipped_surface.conf +0 -0
|
@@ -1,6 +1,6 @@
|
|
|
1
1
|
Metadata-Version: 2.4
|
|
2
2
|
Name: pyflightstream
|
|
3
|
-
Version: 0.
|
|
3
|
+
Version: 0.51.0
|
|
4
4
|
Summary: Version-aware, didactic Python driver for the FlightStream panel-method solver
|
|
5
5
|
Author: Geovana Neves
|
|
6
6
|
License: MIT
|
|
@@ -156,6 +156,7 @@ and the evidence behind it is narrower than for the supported rows.
|
|
|
156
156
|
| 26.123 | 26.12 | `operational` | `8112026` |
|
|
157
157
|
| 26.124 | 26.12 | `operational` | `8172026` |
|
|
158
158
|
| 26.125 | 26.12 | `operational` | `10052026` |
|
|
159
|
+
| 26.126 | 26.12 | `operational` | `10282026` |
|
|
159
160
|
|
|
160
161
|
`operational` means the minimal geometry-to-loads workflow builds for that
|
|
161
162
|
version, checked by a test. `documented` describes the database support level;
|
|
@@ -105,6 +105,7 @@ and the evidence behind it is narrower than for the supported rows.
|
|
|
105
105
|
| 26.123 | 26.12 | `operational` | `8112026` |
|
|
106
106
|
| 26.124 | 26.12 | `operational` | `8172026` |
|
|
107
107
|
| 26.125 | 26.12 | `operational` | `10052026` |
|
|
108
|
+
| 26.126 | 26.12 | `operational` | `10282026` |
|
|
108
109
|
|
|
109
110
|
`operational` means the minimal geometry-to-loads workflow builds for that
|
|
110
111
|
version, checked by a test. `documented` describes the database support level;
|
|
@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
|
|
|
4
4
|
|
|
5
5
|
[project]
|
|
6
6
|
name = "pyflightstream"
|
|
7
|
-
version = "0.
|
|
7
|
+
version = "0.51.0"
|
|
8
8
|
description = "Version-aware, didactic Python driver for the FlightStream panel-method solver"
|
|
9
9
|
readme = "README.md"
|
|
10
10
|
license = {text = "MIT"}
|
|
@@ -232,6 +232,24 @@ versions:
|
|
|
232
232
|
# its total drag 10.8 to 15.0 percent higher. A property of the solver
|
|
233
233
|
# build, not of the package; the package does not compensate for it.
|
|
234
234
|
inherits_base: false
|
|
235
|
+
- canonical: "26.126"
|
|
236
|
+
alias: "26.12"
|
|
237
|
+
# The vendor's end-of-October 26.12 build (frozen 2026-10-30), the corrected
|
|
238
|
+
# package that starts without the licence dialog of the first one. build and
|
|
239
|
+
# prints come from its log, which names Simcenter Flightstream version 2612,
|
|
240
|
+
# build #10282026 (GEO-109 arrival-26126.md).
|
|
241
|
+
#
|
|
242
|
+
# Its package ships an OLDER manual edition (created 2026-04-24, 409 pages,
|
|
243
|
+
# 363 commands, the pre-26.125 names) than FSM-26.125 (2026-09-25), so its
|
|
244
|
+
# rows are carried from 26.125 and cite FSM-26.125 (its manual_editions
|
|
245
|
+
# entry below names that edition). No row cites a 26.125 run as its own:
|
|
246
|
+
# verified, broken and measured-removed rows become documented, the 26.125
|
|
247
|
+
# outcome and its report named in the note, until a run on this build
|
|
248
|
+
# promotes them; documented and edition-removed rows are carried as they
|
|
249
|
+
# are. Every row says so in its note.
|
|
250
|
+
build: "10282026"
|
|
251
|
+
prints: "2612"
|
|
252
|
+
inherits_base: false
|
|
235
253
|
|
|
236
254
|
# Each edition states two inclusive ranges: pages carrying scripting
|
|
237
255
|
# signature headings, and the contiguous Script Index pages parsed for
|
|
@@ -466,3 +484,11 @@ manual_editions:
|
|
|
466
484
|
says it of the pressure drag. The force-plot and stability-coefficient
|
|
467
485
|
commands rename their tokens to match (CDP, CDV), and the 26.125 loads
|
|
468
486
|
exports print the new column names (RPT-160).
|
|
487
|
+
"26.126": >
|
|
488
|
+
FSM-26.125: Simcenter Flightstream User Guide, 26.12 hotfix build 5
|
|
489
|
+
edition, 425 pages, scripting reference pp.288-390 with its Script
|
|
490
|
+
Index at pp.391-397; cited in version notes as "FSM-26.125 p.N".
|
|
491
|
+
Build 26.126 is read from FSM-26.125 and registers no edition of its
|
|
492
|
+
own: the manual in its package is an older edition (created 2026-04-24,
|
|
493
|
+
409 pages, 363 commands under the pre-26.125 names) than FSM-26.125
|
|
494
|
+
(created 2026-09-25), so the newest 26.12 edition remains the reading.
|
|
@@ -48,6 +48,7 @@ ACOUSTIC_SOURCES:
|
|
|
48
48
|
"26.123": {status: documented, note: "FSM-26.123 p.380, unchanged from FSM-26.122 p.380"}
|
|
49
49
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.380, the FSM-26.123 file, carried from 26.123; run on 26.124 in licensed rounds 1 and 3 through the release harness (RPT-096, RPT-098): accepted, its effect read in the exported signals. Promoted by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
50
50
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
51
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
51
52
|
notes: >
|
|
52
53
|
Turns on the computation of acoustic sources during unsteady solver
|
|
53
54
|
runs.
|
|
@@ -90,6 +91,7 @@ CREATE_NEW_ACOUSTIC_OBSERVER:
|
|
|
90
91
|
"26.123": {status: documented, note: "FSM-26.123 p.380, unchanged from FSM-26.122 p.380"}
|
|
91
92
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.380, the FSM-26.123 file, carried from 26.123; run on 26.124 in licensed round 1 through the release harness (RPT-096): accepted, its effect read in the exported signals. Promoted by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
92
93
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
94
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
93
95
|
notes: >
|
|
94
96
|
Appends one observer point at which the signal will be computed.
|
|
95
97
|
THE COORDINATES ARE IN THE REFERENCE COORDINATE SYSTEM and the
|
|
@@ -116,6 +118,7 @@ ACOUSTIC_OBSERVERS_IMPORT:
|
|
|
116
118
|
"26.123": {status: documented, note: "FSM-26.123 p.380, unchanged from FSM-26.122 p.380"}
|
|
117
119
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.380, the FSM-26.123 file, carried from 26.123; run on 26.124 in licensed round 1 through the release harness (RPT-096): accepted, its effect read in the exported signals. Promoted by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
118
120
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
121
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
119
122
|
notes: >
|
|
120
123
|
Reads observer locations from a CSV text file whose path follows on
|
|
121
124
|
the next line. The manual describes the file's own format, a count
|
|
@@ -145,6 +148,7 @@ DELETE_ACOUSTIC_OBSERVER:
|
|
|
145
148
|
"26.123": {status: documented, note: "FSM-26.123 p.380, unchanged from FSM-26.122 p.380"}
|
|
146
149
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.380, the FSM-26.123 file, carried from 26.123; probed on 26.124 by pyfs-qa (CMP-26124_2026-10-02_qa-promote)"}
|
|
147
150
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
151
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
148
152
|
notes: >
|
|
149
153
|
Deletes one observer by index; the deletion of index 1 is the one run
|
|
150
154
|
(26.124, the second computation and export held only the second observer;
|
|
@@ -172,6 +176,7 @@ DELETE_ALL_ACOUSTIC_OBSERVERS:
|
|
|
172
176
|
"26.123": {status: documented, note: "FSM-26.123 p.380, unchanged from FSM-26.122 p.380"}
|
|
173
177
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.380, the FSM-26.123 file, carried from 26.123; probed on 26.124 by pyfs-qa (CMP-26124_2026-10-02_qa-promote)"}
|
|
174
178
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
179
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
175
180
|
notes: >
|
|
176
181
|
Deletes every observer. A separate command rather than a sentinel
|
|
177
182
|
value of the one above, which is why that one offers no all-form.
|
|
@@ -201,6 +206,7 @@ SET_ACOUSTIC_OBSERVER_TIME:
|
|
|
201
206
|
"26.123": {status: documented, note: "FSM-26.123 p.380, unchanged from FSM-26.122 p.380"}
|
|
202
207
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.380, the FSM-26.123 file, carried from 26.123; run on 26.124 in licensed round 1 through the release harness (RPT-096): accepted, its effect read in the exported signals. Promoted by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
203
208
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
209
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.386, unchanged from FSM-26.124 p.380"}
|
|
204
210
|
notes: >
|
|
205
211
|
Time window of the observer signal and how many steps it is sampled
|
|
206
212
|
at. This is the OBSERVER's time axis and not the solver's: an
|
|
@@ -224,6 +230,7 @@ COMPUTE_ACOUSTIC_SIGNALS:
|
|
|
224
230
|
"26.123": {status: documented, note: "FSM-26.123 p.381, unchanged from FSM-26.122 p.381"}
|
|
225
231
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.381, the FSM-26.123 file, carried from 26.123; accepted on 26.124, its effect not isolated (reports/compat/CMP-26124_2026-09-30_acoustics.yaml); its effect observed by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
226
232
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.387, unchanged from FSM-26.124 p.381"}
|
|
233
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.387, unchanged from FSM-26.124 p.381"}
|
|
227
234
|
notes: >
|
|
228
235
|
Computes the signal at every observer, from the acoustic sources
|
|
229
236
|
recorded during the unsteady run. The one command in the chapter
|
|
@@ -248,6 +255,7 @@ EXPORT_ACOUSTIC_SIGNALS:
|
|
|
248
255
|
"26.123": {status: documented, note: "FSM-26.123 p.381, unchanged from FSM-26.122 p.381"}
|
|
249
256
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.381, the FSM-26.123 file, carried from 26.123; run on 26.124 in licensed rounds 1 and 3 through the release harness (RPT-096, RPT-098): accepted, its effect read in the exported signals. Promoted by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
250
257
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.387, unchanged from FSM-26.124 p.381"}
|
|
258
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.387, unchanged from FSM-26.124 p.381"}
|
|
251
259
|
notes: >
|
|
252
260
|
Writes the computed signals at every observer to one file, the path
|
|
253
261
|
on the next line. There is no per-observer export.
|
|
@@ -291,6 +299,7 @@ CREATE_ACOUSTIC_SECTION:
|
|
|
291
299
|
"26.123": {status: documented, note: "FSM-26.123 p.381, unchanged from FSM-26.122 p.381"}
|
|
292
300
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_qa-promote.yaml", note: "FSM-26.124 p.381, the FSM-26.123 file, carried from 26.123; run on 26.124 in licensed round 1 through the release harness (RPT-096): accepted, its effect read in the exported signals. Promoted by the pyfs-qa probe run CMP-26124_2026-10-02_qa-promote"}
|
|
293
301
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.387, unchanged from FSM-26.124 p.381"}
|
|
302
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.387, unchanged from FSM-26.124 p.381"}
|
|
294
303
|
notes: >
|
|
295
304
|
Builds an annular grid of observers in a plane and exports the
|
|
296
305
|
signal at each of them, which is how a directivity pattern is
|
|
@@ -39,6 +39,7 @@ CREATE_NEW_ACTUATOR:
|
|
|
39
39
|
- name: subtype
|
|
40
40
|
values: [CUSTOM, ELLIPTICAL, GENERIC]
|
|
41
41
|
- name: name
|
|
42
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.333 adds GENERIC to the thrust-profile models a propeller takes, beside CUSTOM and ELLIPTICAL of FSM-26.124 p.327; the rest of the grammar is unchanged", args: [{"name": "type"}, {"name": "subtype", "values": ["CUSTOM", "ELLIPTICAL", "GENERIC"]}, {"name": "name"}]}
|
|
42
43
|
notes: >
|
|
43
44
|
SUBTYPE selects the thrust profile model and applies only to the
|
|
44
45
|
PROPELLER type. CUSTOM imports a radial force distribution;
|
|
@@ -66,6 +67,7 @@ SET_ACTUATOR_NAME:
|
|
|
66
67
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.327, unchanged from FSM-26.122 p.327"}
|
|
67
68
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.327, the FSM-26.123 file, carried from 26.123"}
|
|
68
69
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
70
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
69
71
|
|
|
70
72
|
SET_ACTUATOR_AXIS:
|
|
71
73
|
layout: inline
|
|
@@ -96,6 +98,7 @@ SET_ACTUATOR_AXIS:
|
|
|
96
98
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.327, unchanged from FSM-26.122 p.327"}
|
|
97
99
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.327, the FSM-26.123 file, carried from 26.123"}
|
|
98
100
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
101
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
99
102
|
notes: >
|
|
100
103
|
Places the actuator disc on an axis of a local coordinate system
|
|
101
104
|
(frame index greater than 1); the frame must exist before this
|
|
@@ -128,6 +131,7 @@ SET_ACTUATOR_RADIUS:
|
|
|
128
131
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.327, unchanged from FSM-26.122 p.327"}
|
|
129
132
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.327, the FSM-26.123 file, carried from 26.123"}
|
|
130
133
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
134
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
131
135
|
|
|
132
136
|
SET_PROP_ACTUATOR_RPM:
|
|
133
137
|
layout: inline
|
|
@@ -152,6 +156,7 @@ SET_PROP_ACTUATOR_RPM:
|
|
|
152
156
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.327, unchanged from FSM-26.122 p.327"}
|
|
153
157
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.327, the FSM-26.123 file, carried from 26.123"}
|
|
154
158
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
159
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
155
160
|
notes: >
|
|
156
161
|
Sign selects the rotation direction about the actuator axis.
|
|
157
162
|
|
|
@@ -207,6 +212,7 @@ SET_PROP_ACTUATOR_PROFILE:
|
|
|
207
212
|
"26.123": {status: documented, note: "FSM-26.123 p.327, unchanged from FSM-26.122 p.327"}
|
|
208
213
|
"26.124": {status: documented, note: "FSM-26.124 p.327, the FSM-26.123 file, carried from 26.123; ran on 26.124 under a licensed probe (GEO-106-PYFLIGHTSTREAM-INTERNAL-REPORTS/reports/RPT-070_the-gui-rows-volume-section-and-actuator-disc_2026-09-24.md): eleven rows r,F ending in a final newline were read as twelve points, the log said the solver failed to read the custom radial thrust profile file, and a modal dialog refused the file and held the run until a person closed it; a count or a header line first was read as one point more and every value read as zero; CR LF line ends, a space or tab separator and a dimensional radius changed nothing; the same eleven rows with NO final newline were read as eleven points, with no dialog and no refusal logged, and the saved simulation carries the radii and forces"}
|
|
209
214
|
"26.125": {status: documented, note: "FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
215
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.333, unchanged from FSM-26.124 p.327"}
|
|
210
216
|
notes: >
|
|
211
217
|
Imports a custom radial thrust profile; the TXT file path follows
|
|
212
218
|
on the line after the inline arguments. UNITS_TYPE gives the force
|
|
@@ -241,6 +247,7 @@ SET_PROP_ACTUATOR_THRUST:
|
|
|
241
247
|
"26.123": {status: documented, note: "FSM-26.123 p.328, unchanged from FSM-26.122 p.328"}
|
|
242
248
|
"26.124": {status: documented, note: "FSM-26.124 p.328, the FSM-26.123 file, carried from 26.123; it ran on 26.124 without abort or logged error in reports/compat/CMP-26124_2026-09-14_full-sim.yaml, its effect not observable there (unprobed), so it stays documented"}
|
|
243
249
|
"26.125": {status: documented, note: "FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
250
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
244
251
|
notes: >
|
|
245
252
|
Net thrust of the disc. The manual warns to verify that the
|
|
246
253
|
coefficient convention matches the solver formulation and
|
|
@@ -268,6 +275,7 @@ SET_PROP_ACTUATOR_SWIRL:
|
|
|
268
275
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.328, unchanged from FSM-26.122 p.328"}
|
|
269
276
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.328, the FSM-26.123 file, carried from 26.123"}
|
|
270
277
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
278
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
271
279
|
notes: >
|
|
272
280
|
Fraction between 0 and 1 of the swirl velocity kept downstream;
|
|
273
281
|
values below 1 mimic a stator de-swirling the slipstream
|
|
@@ -299,6 +307,7 @@ ENABLE_ACTUATOR:
|
|
|
299
307
|
"26.123": {status: documented, note: "FSM-26.123 p.328, unchanged from FSM-26.122 p.328"}
|
|
300
308
|
"26.124": {status: documented, note: "FSM-26.124 p.328, the FSM-26.123 file, carried from 26.123; it ran on 26.124 without abort or logged error in reports/compat/CMP-26124_2026-09-14_full-sim.yaml, its effect not observable there (unprobed), so it stays documented"}
|
|
301
309
|
"26.125": {status: documented, note: "FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
310
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
302
311
|
notes: >
|
|
303
312
|
FEBRUARY 2026 IS THE ONE EDITION WHOSE HEADING AND SAMPLE DISAGREE
|
|
304
313
|
ABOUT WHETHER THIS COMMAND TAKES AN ARGUMENT. FSM-26.100 p.319 prints
|
|
@@ -342,6 +351,7 @@ DELETE_ACTUATOR:
|
|
|
342
351
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.328, unchanged from FSM-26.122 p.328"}
|
|
343
352
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.328, the FSM-26.123 file, carried from 26.123"}
|
|
344
353
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
354
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
345
355
|
|
|
346
356
|
DISABLE_ACTUATOR:
|
|
347
357
|
layout: inline
|
|
@@ -402,3 +412,4 @@ SET_ACTUATOR_WAKE_TYPE:
|
|
|
402
412
|
"26.123": {status: documented, note: "FSM-26.123 p.328, unchanged from FSM-26.122 p.328"}
|
|
403
413
|
"26.124": {status: documented, note: "FSM-26.124 p.328, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
404
414
|
"26.125": {status: documented, note: "FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
|
415
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.334, unchanged from FSM-26.124 p.328"}
|
{pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/advanced_settings.yaml
RENAMED
|
@@ -42,6 +42,7 @@ SET_SOLVER_CONVERGENCE_ITERATIONS:
|
|
|
42
42
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.349, unchanged from FSM-26.122 p.349"}
|
|
43
43
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123"}
|
|
44
44
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
45
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
45
46
|
notes: >
|
|
46
47
|
Number of iterations the solver must remain below the convergence
|
|
47
48
|
threshold before convergence is declared.
|
|
@@ -65,6 +66,7 @@ SOLVER_MINIMUM_CP:
|
|
|
65
66
|
"26.123": {status: verified, report: "reports/compat/CMP-26123_2026-08-17_full-sim.yaml", note: "FSM-26.123 p.350, unchanged from FSM-26.122 p.350"}
|
|
66
67
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-09-14_full-sim.yaml", note: "FSM-26.124 p.350, the FSM-26.123 file, carried from 26.123"}
|
|
67
68
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
69
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
68
70
|
default: -20
|
|
69
71
|
default_ref: "FSM-26.120 p.221"
|
|
70
72
|
notes: >
|
|
@@ -107,6 +109,7 @@ REYNOLDS_AVERAGED_DRAG_FORCES:
|
|
|
107
109
|
"26.123": {status: documented, report: "reports/compat/CMP-26123_2026-10-16_rotor-effect-reanalysis.yaml", note: "FSM-26.123 p.349; direct inconclusive evidence: convergence and a loads export do not isolate this setting's effect. The cited reanalysis report retains the run and the limits of that evidence."}
|
|
108
110
|
"26.124": {status: documented, note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
109
111
|
"26.125": {status: documented, note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
112
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
110
113
|
notes: >
|
|
111
114
|
Toggles the Reynolds-averaged (flat plate) boundary layer
|
|
112
115
|
calculations.
|
|
@@ -130,6 +133,7 @@ SOLVER_SET_MESH_INDUCED_WAKE_VELOCITY:
|
|
|
130
133
|
"26.123": {status: documented, report: "reports/compat/CMP-26123_2026-10-16_rotor-effect-reanalysis.yaml", note: "FSM-26.123 p.349; direct inconclusive evidence: convergence and a loads export do not isolate this setting's effect. The cited reanalysis report retains the run and the limits of that evidence."}
|
|
131
134
|
"26.124": {status: documented, note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
132
135
|
"26.125": {status: documented, note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
136
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
133
137
|
|
|
134
138
|
SOLVER_SET_FARFIELD_LAYERS:
|
|
135
139
|
layout: inline
|
|
@@ -150,6 +154,7 @@ SOLVER_SET_FARFIELD_LAYERS:
|
|
|
150
154
|
"26.123": {status: documented, report: "reports/compat/CMP-26123_2026-10-16_rotor-effect-reanalysis.yaml", note: "FSM-26.123 p.349; direct inconclusive evidence: convergence and a loads export do not isolate this setting's effect. The cited reanalysis report retains the run and the limits of that evidence."}
|
|
151
155
|
"26.124": {status: documented, note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
152
156
|
"26.125": {status: documented, note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
157
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
153
158
|
default: 3
|
|
154
159
|
default_ref: "FSM-26.120 p.344"
|
|
155
160
|
notes: >
|
|
@@ -175,6 +180,7 @@ SOLVER_UNSTEADY_PRESSURE_AND_KUTTA:
|
|
|
175
180
|
"26.123": {status: documented, report: "reports/compat/CMP-26123_2026-10-16_rotor-effect-reanalysis.yaml", note: "FSM-26.123 p.349; direct inconclusive evidence: convergence and a loads export do not isolate this setting's effect. The cited reanalysis report retains the run and the limits of that evidence."}
|
|
176
181
|
"26.124": {status: documented, note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
177
182
|
"26.125": {status: documented, note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
183
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
178
184
|
notes: >
|
|
179
185
|
Toggles the unsteady Bernoulli and Kutta terms of the unsteady
|
|
180
186
|
solver.
|
|
@@ -198,6 +204,7 @@ SET_WAKE_TERMINATION_TIME_STEPS:
|
|
|
198
204
|
"26.123": {status: documented, note: "FSM-26.123 p.349, unchanged from FSM-26.122 p.349"}
|
|
199
205
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-02_t1-probe.yaml", note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123"}
|
|
200
206
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
207
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
201
208
|
notes: >
|
|
202
209
|
Number of time steps after which a wake vortex filament edge that
|
|
203
210
|
lost all of its strength is removed from the simulation.
|
|
@@ -218,6 +225,7 @@ SET_WAKE_ON_WAKE_INDUCTION:
|
|
|
218
225
|
"26.123": {status: documented, report: "reports/compat/CMP-26123_2026-10-16_rotor-effect-reanalysis.yaml", note: "FSM-26.123 p.349; direct inconclusive evidence: convergence and a loads export do not isolate this setting's effect. The cited reanalysis report retains the run and the limits of that evidence."}
|
|
219
226
|
"26.124": {status: documented, note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
220
227
|
"26.125": {status: documented, note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.349"}
|
|
228
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.357, unchanged from FSM-26.124 p.349"}
|
|
221
229
|
notes: >
|
|
222
230
|
Toggles the wake-on-wake induced velocity computation.
|
|
223
231
|
|
|
@@ -237,6 +245,7 @@ ADDITIONAL_WAKE_RELAXATION_ITERATION:
|
|
|
237
245
|
"26.123": {status: documented, report: "reports/compat/CMP-26123_2026-10-16_rotor-effect-reanalysis.yaml", note: "FSM-26.123 p.350; direct inconclusive evidence: convergence and a loads export do not isolate this setting's effect. The cited reanalysis report retains the run and the limits of that evidence."}
|
|
238
246
|
"26.124": {status: documented, note: "FSM-26.124 p.350, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
239
247
|
"26.125": {status: documented, note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
248
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
240
249
|
notes: >
|
|
241
250
|
Performs one additional wake relaxation iteration.
|
|
242
251
|
|
|
@@ -255,6 +264,7 @@ AEROELASTIC_RBF_TYPE:
|
|
|
255
264
|
"26.123": {status: documented, note: "FSM-26.123 p.383, unchanged from FSM-26.122 p.383"}
|
|
256
265
|
"26.124": {status: documented, note: "FSM-26.124 p.383, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
257
266
|
"26.125": {status: documented, note: "FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
267
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
258
268
|
notes: >
|
|
259
269
|
RBF mesh morphing algorithm of the aeroelastic coupling. The manual
|
|
260
270
|
gives the options as a NUMBERED list of five and says the input may
|
|
@@ -288,6 +298,7 @@ LAMINAR_SEPARATION:
|
|
|
288
298
|
"26.123": {status: documented, note: "FSM-26.123 p.350, unchanged from FSM-26.122 p.350"}
|
|
289
299
|
"26.124": {status: documented, note: "FSM-26.124 p.350, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
290
300
|
"26.125": {status: documented, note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
301
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
291
302
|
notes: >
|
|
292
303
|
Laminar boundary layer separation. This is the one member of the
|
|
293
304
|
flow-separation family that survived the 26.101 redesign unchanged
|
|
@@ -310,6 +321,7 @@ KUTTA_JOUKOWSKI_LIFT_FORCES:
|
|
|
310
321
|
"26.123": {status: documented, note: "FSM-26.123 p.349, unchanged from FSM-26.122 p.349"}
|
|
311
322
|
"26.124": {status: documented, note: "FSM-26.124 p.349, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
312
323
|
"26.125": {status: documented, note: "FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
324
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.356, unchanged from FSM-26.124 p.349"}
|
|
313
325
|
notes: >
|
|
314
326
|
Computes the inviscid lift by the Kutta-Joukowski theorem, from the
|
|
315
327
|
bound circulation, instead of by integrating the surface pressure,
|
|
@@ -338,6 +350,7 @@ PRINT_ROTOR_INDUCED_VELOCITIES:
|
|
|
338
350
|
"26.123": {status: documented, note: "FSM-26.123 p.350, unchanged from FSM-26.122 p.350"}
|
|
339
351
|
"26.124": {status: documented, note: "FSM-26.124 p.350, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
340
352
|
"26.125": {status: documented, note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
353
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
341
354
|
notes: >
|
|
342
355
|
Prints the rotor-induced velocities to the log at every time step of
|
|
343
356
|
an unsteady run, which is what the manual's sample comment states.
|
|
@@ -360,6 +373,7 @@ SET_ADAPTIVE_FIELD_GRID_REFINEMENT:
|
|
|
360
373
|
"26.123": {status: documented, note: "FSM-26.123 p.350, unchanged from FSM-26.122 p.350"}
|
|
361
374
|
"26.124": {status: documented, note: "FSM-26.124 p.350, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
362
375
|
"26.125": {status: documented, note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
376
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
363
377
|
notes: >
|
|
364
378
|
Refines the field-source grid where the solution needs it. The
|
|
365
379
|
manual's sample comment marks this transonic only; what it does on a
|
|
@@ -380,6 +394,7 @@ ROTOR_INDUCED_VELOCITY_BLENDING:
|
|
|
380
394
|
"26.123": {status: documented, note: "FSM-26.123 p.350, unchanged from FSM-26.122 p.350"}
|
|
381
395
|
"26.124": {status: documented, note: "FSM-26.124 p.350, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
382
396
|
"26.125": {status: documented, note: "FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
397
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.357, unchanged from FSM-26.124 p.350"}
|
|
383
398
|
default: 0.25
|
|
384
399
|
default_ref: "FSM-26.120 p.345"
|
|
385
400
|
notes: >
|
|
@@ -407,6 +422,7 @@ SET_WAKE_NUMERICAL_RELAXATION:
|
|
|
407
422
|
"26.123": {status: documented, note: "FSM-26.123 p.351, unchanged from FSM-26.122 p.351"}
|
|
408
423
|
"26.124": {status: documented, note: "FSM-26.124 p.351, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
409
424
|
"26.125": {status: documented, note: "FSM-26.125 p.358, unchanged from FSM-26.124 p.351"}
|
|
425
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.358, unchanged from FSM-26.124 p.351"}
|
|
410
426
|
default: 0.15
|
|
411
427
|
default_ref: "FSM-26.120 p.346"
|
|
412
428
|
notes: >
|
|
@@ -431,6 +447,7 @@ SET_JET_WAKE_DECAY_NORMALIZED_LENGTH:
|
|
|
431
447
|
"26.123": {status: documented, note: "FSM-26.123 p.351, unchanged from FSM-26.122 p.351"}
|
|
432
448
|
"26.124": {status: documented, note: "FSM-26.124 p.351, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
433
449
|
"26.125": {status: documented, default: 10.0, default_ref: "FSM-26.125 p.358", note: "FSM-26.125 p.358, read against FSM-26.124 p.351: the grammar is unchanged and the documented default decay length moves from 100 to 10 jet diameters (minimum still 1); the entry-level default records the earlier editions' value"}
|
|
450
|
+
"26.126": {"status": "documented", "default": 10.0, "default_ref": "FSM-26.125 p.358", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.358, read against FSM-26.124 p.351: the grammar is unchanged and the documented default decay length moves from 100 to 10 jet diameters (minimum still 1); the entry-level default records the earlier editions' value"}
|
|
434
451
|
default: 100.0
|
|
435
452
|
default_ref: "FSM-26.120 p.346"
|
|
436
453
|
notes: >
|
|
@@ -534,6 +551,7 @@ SET_WAKE_DECAY_CONSTANT:
|
|
|
534
551
|
"26.123": {status: documented, note: "FSM-26.123 p.348, unchanged from FSM-26.122 p.348"}
|
|
535
552
|
"26.124": {status: documented, note: "FSM-26.124 p.348, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
536
553
|
"26.125": {status: documented, note: "FSM-26.125 p.355, unchanged from FSM-26.124 p.348"}
|
|
554
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.355, unchanged from FSM-26.124 p.348"}
|
|
537
555
|
notes: >
|
|
538
556
|
Rate at which wake vorticity decays with distance.
|
|
539
557
|
|
|
@@ -57,6 +57,7 @@ EXECUTE_AEROELASTIC_ANALYSIS:
|
|
|
57
57
|
"26.123": {status: documented, note: "FSM-26.123 p.382, unchanged from FSM-26.122 p.382"}
|
|
58
58
|
"26.124": {status: documented, note: "FSM-26.124 p.382, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092, RPT-093)"}
|
|
59
59
|
"26.125": {status: documented, note: "FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
60
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
60
61
|
notes: >
|
|
61
62
|
Runs the steady-state aeroelastic analysis. For unsteady coupling
|
|
62
63
|
the manual instructs the regular solver execution with
|
|
@@ -83,6 +84,7 @@ ASSIGN_AEROELASTIC_SURFACES:
|
|
|
83
84
|
"26.123": {status: documented, note: "FSM-26.123 p.382, unchanged from FSM-26.122 p.382"}
|
|
84
85
|
"26.124": {status: documented, note: "FSM-26.124 p.382, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-090, RPT-092, RPT-093)"}
|
|
85
86
|
"26.125": {status: documented, note: "FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
87
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
86
88
|
notes: >
|
|
87
89
|
Mesh boundaries whose deflections the toolbox interpolates; one
|
|
88
90
|
index per line after the count, -1 selects all boundaries with no
|
|
@@ -121,6 +123,7 @@ ASSIGN_AEROELASTIC_COORDINATE_SYSTEMS:
|
|
|
121
123
|
"26.123": {status: documented, note: "FSM-26.123 p.382, unchanged from FSM-26.122 p.382"}
|
|
122
124
|
"26.124": {status: documented, note: "FSM-26.124 p.382, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092)"}
|
|
123
125
|
"26.125": {status: documented, note: "FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
126
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
124
127
|
notes: >
|
|
125
128
|
Links user-defined coordinate systems for the aeroelastic
|
|
126
129
|
interpolation, one index per line after the count.
|
|
@@ -156,6 +159,7 @@ IMPORT_AEROELASTIC_STRUCTURAL_NODES:
|
|
|
156
159
|
"26.123": {status: documented, note: "FSM-26.123 p.382, unchanged from FSM-26.122 p.382"}
|
|
157
160
|
"26.124": {status: documented, note: "FSM-26.124 p.382, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092, RPT-093)"}
|
|
158
161
|
"26.125": {status: documented, note: "FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
162
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
159
163
|
notes: >
|
|
160
164
|
Imports the structural node list; the file is three comma
|
|
161
165
|
separated columns X,Y,Z per node (FSM-26.120 p.274), interpreted in
|
|
@@ -174,6 +178,7 @@ DELETE_AEROELASTIC_STRUCTURAL_NODES:
|
|
|
174
178
|
"26.123": {status: documented, note: "FSM-26.123 p.382, unchanged from FSM-26.122 p.382"}
|
|
175
179
|
"26.124": {status: documented, note: "FSM-26.124 p.382, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092)"}
|
|
176
180
|
"26.125": {status: documented, note: "FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
181
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.388, unchanged from FSM-26.124 p.382"}
|
|
177
182
|
notes: Deletes all imported structural nodes.
|
|
178
183
|
|
|
179
184
|
SET_AEROELASTIC_WORKING_DIRECTORY:
|
|
@@ -191,6 +196,7 @@ SET_AEROELASTIC_WORKING_DIRECTORY:
|
|
|
191
196
|
"26.123": {status: documented, note: "FSM-26.123 p.382, unchanged from FSM-26.122 p.382"}
|
|
192
197
|
"26.124": {status: documented, note: "FSM-26.124 p.382, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092)"}
|
|
193
198
|
"26.125": {status: documented, note: "FSM-26.125 p.389, unchanged from FSM-26.124 p.382"}
|
|
199
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.389, unchanged from FSM-26.124 p.382"}
|
|
194
200
|
notes: >
|
|
195
201
|
Runtime folder of the coupling: FlightStream writes FSIDisp.txt
|
|
196
202
|
and the loads exports there and executes the runtime command
|
|
@@ -212,6 +218,7 @@ SET_AEROELASTIC_POST_PROCESSING_SCRIPT:
|
|
|
212
218
|
"26.123": {status: documented, note: "FSM-26.123 p.383, unchanged from FSM-26.122 p.383"}
|
|
213
219
|
"26.124": {status: documented, note: "FSM-26.124 p.383, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092)"}
|
|
214
220
|
"26.125": {status: documented, note: "FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
221
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
215
222
|
notes: >
|
|
216
223
|
FlightStream script executed between FSI iterations, before the
|
|
217
224
|
external executable; the documented mechanism for exporting the
|
|
@@ -233,6 +240,7 @@ SET_AEROELASTIC_STRUCTURAL_EXECUTION_COMMAND:
|
|
|
233
240
|
"26.123": {status: documented, note: "FSM-26.123 p.383, unchanged from FSM-26.122 p.383"}
|
|
234
241
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-12_gap-probes.yaml", note: "FSM-26.124 p.383, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092)"}
|
|
235
242
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-12_gap-probes.yaml", note: "FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
243
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
236
244
|
notes: >
|
|
237
245
|
Full command executed per coupling iteration in the working
|
|
238
246
|
directory. The dry run observed a bare invocation: no arguments
|
|
@@ -253,6 +261,7 @@ SET_AEROELASTIC_ITERATIONS:
|
|
|
253
261
|
"26.123": {status: documented, note: "FSM-26.123 p.383, unchanged from FSM-26.122 p.383"}
|
|
254
262
|
"26.124": {status: documented, note: "FSM-26.124 p.383, the FSM-26.123 file, carried from 26.123; run on 26.124 in the package's coupled scripts (RPT-092)"}
|
|
255
263
|
"26.125": {status: documented, note: "FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
264
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
256
265
|
notes: >
|
|
257
266
|
Two-way coupling iterations: the total count in steady mode, the
|
|
258
267
|
count per time step in unsteady mode (FSM-26.120 p.275).
|
|
@@ -272,6 +281,7 @@ SET_AEROELASTIC_COUPLING_IN_UNSTEADY:
|
|
|
272
281
|
"26.123": {status: documented, note: "FSM-26.123 p.383, unchanged from FSM-26.122 p.383"}
|
|
273
282
|
"26.124": {status: documented, note: "FSM-26.124 p.383, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
274
283
|
"26.125": {status: documented, note: "FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
284
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.389, unchanged from FSM-26.124 p.383"}
|
|
275
285
|
notes: >
|
|
276
286
|
Toggles the FSI execution inside the unsteady solver; with ENABLE
|
|
277
287
|
the coupling runs on the regular solver start.
|
|
@@ -287,6 +297,7 @@ SET_AEROELASTIC_CONVERGENCE_THRESHOLD:
|
|
|
287
297
|
default_ref: "FSM-26.125 p.390"
|
|
288
298
|
versions:
|
|
289
299
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-05_probe-campaign.yaml", note: "FSM-26.125 p.390, the first edition to document it"}
|
|
300
|
+
"26.126": {status: verified, report: "reports/compat/CMP-26126_2026-10-30_probe-campaign-fsm.yaml", note: "Judged on 26.126 by CMP-26126_2026-10-30_probe-campaign-fsm; FSM-26.125 is the reading (the 26.126 package ships an older edition dated 2026-04-24). The 26.125 note: FSM-26.125 p.390, the first edition to document it"}
|
|
290
301
|
notes: >
|
|
291
302
|
Sets the convergence threshold of an aeroelastic coupling run. The
|
|
292
303
|
page gives 1E-3 as the default and prints 1E-05 in its sample. First
|
|
@@ -312,6 +323,7 @@ SET_DIRECT_AEROELASTIC_MESH_MORPHING:
|
|
|
312
323
|
SET_DIRECT_AEROELASTIC_MESH_MORPHING line of four probe arms as an
|
|
313
324
|
unrecognised command, and no direct-mode call followed.
|
|
314
325
|
"26.125": {status: documented, note: "FSM-26.125 p.388, the Aeroelastic Coupling Toolbox page; the licensed run of FR-341 (RPT-155) is the evidence a promotion through pyfs-qa apply-compat would cite, and none is recorded yet"}
|
|
326
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.388, the Aeroelastic Coupling Toolbox page; the licensed run of FR-341 (RPT-155) is the evidence a promotion through pyfs-qa apply-compat would cite, and none is recorded yet"}
|
|
315
327
|
notes: >
|
|
316
328
|
Direct mesh morphing of the aeroelastic coupling, in place of the
|
|
317
329
|
structural-node import: the solver lists the surface vertices of the
|
{pyflightstream-0.50.2 → pyflightstream-0.51.0}/src/pyflightstream/commands/base_regions.yaml
RENAMED
|
@@ -49,6 +49,7 @@ CREATE_NEW_BASE_REGION:
|
|
|
49
49
|
"26.123": {status: documented, note: "FSM-26.123 p.321, unchanged from FSM-26.122 p.321"}
|
|
50
50
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-26_marking.yaml", note: "FSM-26.124 p.321, the FSM-26.123 file, carried from 26.123"}
|
|
51
51
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-26_marking.yaml", note: "FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
52
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
52
53
|
notes: >
|
|
53
54
|
Marks one mesh boundary as a base region and gives it a pressure
|
|
54
55
|
model. No all-form is stated, so -1 is not accepted here;
|
|
@@ -100,6 +101,7 @@ SET_BASE_REGION_CP:
|
|
|
100
101
|
"26.123": {status: documented, note: "FSM-26.123 p.321, unchanged from FSM-26.122 p.321"}
|
|
101
102
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-26_marking.yaml", note: "FSM-26.124 p.321, the FSM-26.123 file, carried from 26.123"}
|
|
102
103
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-26_marking.yaml", note: "FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
104
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
103
105
|
notes: >
|
|
104
106
|
Changes the pressure model of a base region that already exists.
|
|
105
107
|
|
|
@@ -143,6 +145,7 @@ SET_BASE_REGION_BENDING_ANGLE:
|
|
|
143
145
|
"26.123": {status: documented, note: "FSM-26.123 p.288, unchanged from FSM-26.122 p.288"}
|
|
144
146
|
"26.124": {status: documented, note: "FSM-26.124 p.288, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
145
147
|
"26.125": {status: documented, note: "FSM-26.125 p.293, read against FSM-26.124 p.288: the sample no longer carries the chapter heading the reader took from the next page; the grammar is unchanged"}
|
|
148
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.293, read against FSM-26.124 p.288: the sample no longer carries the chapter heading the reader took from the next page; the grammar is unchanged"}
|
|
146
149
|
notes: >
|
|
147
150
|
Threshold on how far a surface may bend away from the aft-facing
|
|
148
151
|
direction and still be detected as part of a base region, which is
|
|
@@ -210,6 +213,7 @@ DETECT_BASE_REGIONS_BY_SURFACE:
|
|
|
210
213
|
- name: boundary_index
|
|
211
214
|
cites: boundaries
|
|
212
215
|
all_sentinel: -1
|
|
216
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.327 adds -1, every boundary, to the boundary index FSM-26.124 p.321 took as positive only, and its second sample passes it", "args": [{"name": "boundary_index", "cites": "boundaries", "all_sentinel": -1}]}
|
|
213
217
|
notes: >
|
|
214
218
|
The same detection restricted to one mesh boundary, for a geometry
|
|
215
219
|
where the whole-model form marks more than intended. Through 26.124
|
|
@@ -235,6 +239,7 @@ SET_BASE_REGION_TRAILING_EDGES:
|
|
|
235
239
|
"26.123": {status: documented, note: "FSM-26.123 p.321, unchanged from FSM-26.122 p.321"}
|
|
236
240
|
"26.124": {status: verified, report: "reports/compat/CMP-26124_2026-10-26_marking.yaml", note: "FSM-26.124 p.321, the FSM-26.123 file, carried from 26.123"}
|
|
237
241
|
"26.125": {status: verified, report: "reports/compat/CMP-26125_2026-10-26_marking.yaml", note: "FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
242
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
238
243
|
notes: >
|
|
239
244
|
Marks the rim of a base region as a trailing edge, which is what
|
|
240
245
|
lets the wake leave the body there. The manual documents -1 for
|
|
@@ -263,6 +268,7 @@ DELETE_BASE_REGION:
|
|
|
263
268
|
"26.123": {status: documented, note: "FSM-26.123 p.321, unchanged from FSM-26.122 p.321"}
|
|
264
269
|
"26.124": {status: documented, note: "FSM-26.124 p.321, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
265
270
|
"26.125": {status: documented, note: "FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
271
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.327, unchanged from FSM-26.124 p.321"}
|
|
266
272
|
notes: >
|
|
267
273
|
Unmarks one base region. NO ALL-FORM IS STATED HERE, unlike the two
|
|
268
274
|
neighbouring commands that take the same kind of index and document
|
|
@@ -288,6 +294,7 @@ SELECT_BASE_REGION_FACES:
|
|
|
288
294
|
"26.123": {status: documented, note: "FSM-26.123 p.322, unchanged from FSM-26.122 p.322"}
|
|
289
295
|
"26.124": {status: documented, note: "FSM-26.124 p.322, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
290
296
|
"26.125": {status: documented, note: "FSM-26.125 p.328, unchanged from FSM-26.124 p.322"}
|
|
297
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.328, unchanged from FSM-26.124 p.322"}
|
|
291
298
|
notes: >
|
|
292
299
|
Selects the mesh faces of a base region, or of all of them with -1,
|
|
293
300
|
which the sample passes. Selection is application state rather than
|
|
@@ -321,6 +328,7 @@ REMESH_BASE_REGION:
|
|
|
321
328
|
"26.123": {status: documented, note: "FSM-26.123 p.322, unchanged from FSM-26.122 p.322"}
|
|
322
329
|
"26.124": {status: documented, note: "FSM-26.124 p.322, the FSM-26.123 file, carried from 26.123; not run on 26.124"}
|
|
323
330
|
"26.125": {status: documented, note: "FSM-26.125 p.328, unchanged from FSM-26.124 p.322"}
|
|
331
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.328, unchanged from FSM-26.124 p.322"}
|
|
324
332
|
notes: >
|
|
325
333
|
Rebuilds a base region's faces as a radial distribution, which a
|
|
326
334
|
detected base region does not have: it inherits whatever the import
|
|
@@ -388,6 +396,7 @@ SET_OUTFLOW_TRAILING_EDGES:
|
|
|
388
396
|
status: removed
|
|
389
397
|
successor: SET_OUTLET_TRAILING_EDGES
|
|
390
398
|
note: "FSM-26.125 p.337 prints SET_OUTLET_TRAILING_EDGES in this place, as FSM-26.123 and FSM-26.124 did; not run on 26.125"
|
|
399
|
+
"26.126": {"status": "removed", "successor": "SET_OUTLET_TRAILING_EDGES", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.337 prints SET_OUTLET_TRAILING_EDGES in this place, as FSM-26.123 and FSM-26.124 did; not run on 26.125"}
|
|
391
400
|
|
|
392
401
|
SET_OUTLET_TRAILING_EDGES:
|
|
393
402
|
layout: inline
|
|
@@ -420,3 +429,4 @@ SET_OUTLET_TRAILING_EDGES:
|
|
|
420
429
|
status: documented
|
|
421
430
|
note: "FSM-26.124 p.331, the FSM-26.123 file, carried from 26.123; not run on 26.124"
|
|
422
431
|
"26.125": {status: documented, note: "FSM-26.125 p.337, read against FSM-26.124 p.331: the placeholder is renamed INDEX and the table describes it as the positive index of the outlet boundary whose edges are marked, while the sample still passes -1; the grammar is unchanged"}
|
|
432
|
+
"26.126": {"status": "documented", "note": "Carried from 26.125: FSM-26.125 is the newest 26.12 edition (the 26.126 package ships an older edition dated 2026-04-24); no run on 26.126 yet. FSM-26.125 p.337, read against FSM-26.124 p.331: the placeholder is renamed INDEX and the table describes it as the positive index of the outlet boundary whose edges are marked, while the sample still passes -1; the grammar is unchanged"}
|