pulumi-vsphere 4.10.0a1709368772__tar.gz → 4.10.0a1710160860__tar.gz

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: pulumi_vsphere
-Version: 4.10.0a1709368772
+Version: 4.10.0a1710160860
 Summary: A Pulumi package for creating vsphere resources
 License: Apache-2.0
 Project-URL: Homepage, https://pulumi.io

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/_inputs.py

@@ -160,6 +160,7 @@ class ComputeClusterVsanStretchedClusterArgs:
                > **NOTE:** You must disable vSphere HA before you enable vSAN on the cluster.
                You can enable or re-enable vSphere HA after vSAN is configured.
                
+               <!--Start PulumiCodeChooser -->
                ```python
                import pulumi
                import pulumi_vsphere as vsphere
@@ -202,6 +203,7 @@ class ComputeClusterVsanStretchedClusterArgs:
                        witness_node=data["vsphere_host"]["witness_host"]["id"],
                    ))
                ```
+               <!--End PulumiCodeChooser -->
         """
         pulumi.set(__self__, "preferred_fault_domain_host_ids", preferred_fault_domain_host_ids)
         pulumi.set(__self__, "secondary_fault_domain_host_ids", secondary_fault_domain_host_ids)
@@ -268,6 +270,7 @@ class ComputeClusterVsanStretchedClusterArgs:
         > **NOTE:** You must disable vSphere HA before you enable vSAN on the cluster.
         You can enable or re-enable vSphere HA after vSAN is configured.
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -310,6 +313,7 @@ class ComputeClusterVsanStretchedClusterArgs:
                 witness_node=data["vsphere_host"]["witness_host"]["id"],
             ))
         ```
+        <!--End PulumiCodeChooser -->
         """
         return pulumi.get(self, "secondary_fault_domain_name")
 

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/compute_cluster_vm_affinity_rule.py

@@ -260,6 +260,7 @@ class ComputeClusterVmAffinityRule(pulumi.CustomResource):
         then creates an affinity rule for these two virtual machines, ensuring they
         will run on the same host whenever possible.
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -290,11 +291,13 @@ class ComputeClusterVmAffinityRule(pulumi.CustomResource):
             compute_cluster_id=cluster.id,
             virtual_machine_ids=[v.id for k, v in vm])
         ```
+        <!--End PulumiCodeChooser -->
 
         The following example creates an affinity rule for a set of virtual machines
         in the cluster by looking up the virtual machine UUIDs from the
         `VirtualMachine` data source.
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -313,6 +316,7 @@ class ComputeClusterVmAffinityRule(pulumi.CustomResource):
             compute_cluster_id=cluster.id,
             virtual_machine_ids=[__item.id for __item in vms_virtual_machine])
         ```
+        <!--End PulumiCodeChooser -->
 
         :param str resource_name: The name of the resource.
         :param pulumi.ResourceOptions opts: Options for the resource.
@@ -368,6 +372,7 @@ class ComputeClusterVmAffinityRule(pulumi.CustomResource):
         then creates an affinity rule for these two virtual machines, ensuring they
         will run on the same host whenever possible.
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -398,11 +403,13 @@ class ComputeClusterVmAffinityRule(pulumi.CustomResource):
             compute_cluster_id=cluster.id,
             virtual_machine_ids=[v.id for k, v in vm])
         ```
+        <!--End PulumiCodeChooser -->
 
         The following example creates an affinity rule for a set of virtual machines
         in the cluster by looking up the virtual machine UUIDs from the
         `VirtualMachine` data source.
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -421,6 +428,7 @@ class ComputeClusterVmAffinityRule(pulumi.CustomResource):
             compute_cluster_id=cluster.id,
             virtual_machine_ids=[__item.id for __item in vms_virtual_machine])
         ```
+        <!--End PulumiCodeChooser -->
 
         :param str resource_name: The name of the resource.
         :param ComputeClusterVmAffinityRuleArgs args: The arguments to use to populate this resource's properties.

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/datacenter.py

@@ -238,22 +238,28 @@ class Datacenter(pulumi.CustomResource):
         container of inventory objects such as hosts and virtual machines.
 
         ## Example Usage
+
         ### Create datacenter on the root folder
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
 
         prod_datacenter = vsphere.Datacenter("prodDatacenter")
         ```
+        <!--End PulumiCodeChooser -->
+
         ### Create datacenter on a subfolder
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
 
         research_datacenter = vsphere.Datacenter("researchDatacenter", folder="/research/")
         ```
+        <!--End PulumiCodeChooser -->
 
         :param str resource_name: The name of the resource.
         :param pulumi.ResourceOptions opts: Options for the resource.
@@ -286,22 +292,28 @@ class Datacenter(pulumi.CustomResource):
         container of inventory objects such as hosts and virtual machines.
 
         ## Example Usage
+
         ### Create datacenter on the root folder
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
 
         prod_datacenter = vsphere.Datacenter("prodDatacenter")
         ```
+        <!--End PulumiCodeChooser -->
+
         ### Create datacenter on a subfolder
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
 
         research_datacenter = vsphere.Datacenter("researchDatacenter", folder="/research/")
         ```
+        <!--End PulumiCodeChooser -->
 
         :param str resource_name: The name of the resource.
         :param DatacenterArgs args: The arguments to use to populate this resource's properties.

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/datastore_cluster.py

@@ -93,7 +93,7 @@ class DatastoreClusterArgs:
                recommendations to move VMs off of a datastore. Note that this setting should
                only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
                estimate of the capacity of the datastores in your cluster, and should be set
-               to roughly 50-60% of the worst case peak performance of the backing LUNs.
+               to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         :param pulumi.Input[int] sdrs_io_reservable_percent_threshold: The threshold, in
                percent, of actual estimated performance of the datastore (in IOPS) that
                storage DRS uses to make recommendations to move VMs off of a datastore when
@@ -390,7 +390,7 @@ class DatastoreClusterArgs:
         recommendations to move VMs off of a datastore. Note that this setting should
         only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
         estimate of the capacity of the datastores in your cluster, and should be set
-        to roughly 50-60% of the worst case peak performance of the backing LUNs.
+        to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         """
         return pulumi.get(self, "sdrs_io_reservable_iops_threshold")
 
@@ -604,7 +604,7 @@ class _DatastoreClusterState:
                recommendations to move VMs off of a datastore. Note that this setting should
                only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
                estimate of the capacity of the datastores in your cluster, and should be set
-               to roughly 50-60% of the worst case peak performance of the backing LUNs.
+               to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         :param pulumi.Input[int] sdrs_io_reservable_percent_threshold: The threshold, in
                percent, of actual estimated performance of the datastore (in IOPS) that
                storage DRS uses to make recommendations to move VMs off of a datastore when
@@ -902,7 +902,7 @@ class _DatastoreClusterState:
         recommendations to move VMs off of a datastore. Note that this setting should
         only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
         estimate of the capacity of the datastores in your cluster, and should be set
-        to roughly 50-60% of the worst case peak performance of the backing LUNs.
+        to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         """
         return pulumi.get(self, "sdrs_io_reservable_iops_threshold")
 
@@ -1121,7 +1121,7 @@ class DatastoreCluster(pulumi.CustomResource):
                recommendations to move VMs off of a datastore. Note that this setting should
                only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
                estimate of the capacity of the datastores in your cluster, and should be set
-               to roughly 50-60% of the worst case peak performance of the backing LUNs.
+               to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         :param pulumi.Input[int] sdrs_io_reservable_percent_threshold: The threshold, in
                percent, of actual estimated performance of the datastore (in IOPS) that
                storage DRS uses to make recommendations to move VMs off of a datastore when
@@ -1325,7 +1325,7 @@ class DatastoreCluster(pulumi.CustomResource):
                recommendations to move VMs off of a datastore. Note that this setting should
                only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
                estimate of the capacity of the datastores in your cluster, and should be set
-               to roughly 50-60% of the worst case peak performance of the backing LUNs.
+               to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         :param pulumi.Input[int] sdrs_io_reservable_percent_threshold: The threshold, in
                percent, of actual estimated performance of the datastore (in IOPS) that
                storage DRS uses to make recommendations to move VMs off of a datastore when
@@ -1543,7 +1543,7 @@ class DatastoreCluster(pulumi.CustomResource):
         recommendations to move VMs off of a datastore. Note that this setting should
         only be set if `sdrs_io_reservable_percent_threshold` cannot make an accurate
         estimate of the capacity of the datastores in your cluster, and should be set
-        to roughly 50-60% of the worst case peak performance of the backing LUNs.
+        to roughly 50-60%!o(MISSING)f the worst case peak performance of the backing LUNs.
         """
         return pulumi.get(self, "sdrs_io_reservable_iops_threshold")
 

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/distributed_virtual_switch.py

@@ -226,7 +226,8 @@ class DistributedVirtualSwitchArgs:
         :param pulumi.Input[int] netflow_sampling_rate: The ratio of total number of packets to
                the number of packets analyzed. The default is `0`, which indicates that the
                VDS should analyze all packets. The maximum value is `1000`, which
-               indicates an analysis rate of 0.001%.
+               indicates an analysis rate of 0.001%!
+               (MISSING)
         :param pulumi.Input[bool] network_resource_control_enabled: Set to `true` to enable
                network I/O control. Default: `false`.
         :param pulumi.Input[str] network_resource_control_version: The version of network I/O
@@ -275,6 +276,7 @@ class DistributedVirtualSwitchArgs:
                `vlan_range` definitions are allowed, but they must not overlap. Example
                below:
                
+               <!--Start PulumiCodeChooser -->
                ```python
                import pulumi
                import pulumi_vsphere as vsphere
@@ -290,6 +292,7 @@ class DistributedVirtualSwitchArgs:
                    ),
                ])
                ```
+               <!--End PulumiCodeChooser -->
         :param pulumi.Input[int] vmotion_maximum_mbit: The maximum allowed usage for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_reservation_mbit: The amount of guaranteed bandwidth for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_share_count: The amount of shares to allocate to the vmotion traffic class for a custom share level.
@@ -1265,7 +1268,8 @@ class DistributedVirtualSwitchArgs:
         The ratio of total number of packets to
         the number of packets analyzed. The default is `0`, which indicates that the
         VDS should analyze all packets. The maximum value is `1000`, which
-        indicates an analysis rate of 0.001%.
+        indicates an analysis rate of 0.001%!
+        (MISSING)
         """
         return pulumi.get(self, "netflow_sampling_rate")
 
@@ -1589,6 +1593,7 @@ class DistributedVirtualSwitchArgs:
         `vlan_range` definitions are allowed, but they must not overlap. Example
         below:
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -1604,6 +1609,7 @@ class DistributedVirtualSwitchArgs:
             ),
         ])
         ```
+        <!--End PulumiCodeChooser -->
         """
         return pulumi.get(self, "vlan_ranges")
 
@@ -1924,7 +1930,8 @@ class _DistributedVirtualSwitchState:
         :param pulumi.Input[int] netflow_sampling_rate: The ratio of total number of packets to
                the number of packets analyzed. The default is `0`, which indicates that the
                VDS should analyze all packets. The maximum value is `1000`, which
-               indicates an analysis rate of 0.001%.
+               indicates an analysis rate of 0.001%!
+               (MISSING)
         :param pulumi.Input[bool] network_resource_control_enabled: Set to `true` to enable
                network I/O control. Default: `false`.
         :param pulumi.Input[str] network_resource_control_version: The version of network I/O
@@ -1973,6 +1980,7 @@ class _DistributedVirtualSwitchState:
                `vlan_range` definitions are allowed, but they must not overlap. Example
                below:
                
+               <!--Start PulumiCodeChooser -->
                ```python
                import pulumi
                import pulumi_vsphere as vsphere
@@ -1988,6 +1996,7 @@ class _DistributedVirtualSwitchState:
                    ),
                ])
                ```
+               <!--End PulumiCodeChooser -->
         :param pulumi.Input[int] vmotion_maximum_mbit: The maximum allowed usage for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_reservation_mbit: The amount of guaranteed bandwidth for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_share_count: The amount of shares to allocate to the vmotion traffic class for a custom share level.
@@ -2979,7 +2988,8 @@ class _DistributedVirtualSwitchState:
         The ratio of total number of packets to
         the number of packets analyzed. The default is `0`, which indicates that the
         VDS should analyze all packets. The maximum value is `1000`, which
-        indicates an analysis rate of 0.001%.
+        indicates an analysis rate of 0.001%!
+        (MISSING)
         """
         return pulumi.get(self, "netflow_sampling_rate")
 
@@ -3303,6 +3313,7 @@ class _DistributedVirtualSwitchState:
         `vlan_range` definitions are allowed, but they must not overlap. Example
         below:
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -3318,6 +3329,7 @@ class _DistributedVirtualSwitchState:
             ),
         ])
         ```
+        <!--End PulumiCodeChooser -->
         """
         return pulumi.get(self, "vlan_ranges")
 
@@ -3640,7 +3652,8 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
         :param pulumi.Input[int] netflow_sampling_rate: The ratio of total number of packets to
                the number of packets analyzed. The default is `0`, which indicates that the
                VDS should analyze all packets. The maximum value is `1000`, which
-               indicates an analysis rate of 0.001%.
+               indicates an analysis rate of 0.001%!
+               (MISSING)
         :param pulumi.Input[bool] network_resource_control_enabled: Set to `true` to enable
                network I/O control. Default: `false`.
         :param pulumi.Input[str] network_resource_control_version: The version of network I/O
@@ -3689,6 +3702,7 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
                `vlan_range` definitions are allowed, but they must not overlap. Example
                below:
                
+               <!--Start PulumiCodeChooser -->
                ```python
                import pulumi
                import pulumi_vsphere as vsphere
@@ -3704,6 +3718,7 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
                    ),
                ])
                ```
+               <!--End PulumiCodeChooser -->
         :param pulumi.Input[int] vmotion_maximum_mbit: The maximum allowed usage for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_reservation_mbit: The amount of guaranteed bandwidth for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_share_count: The amount of shares to allocate to the vmotion traffic class for a custom share level.
@@ -4164,7 +4179,8 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
         :param pulumi.Input[int] netflow_sampling_rate: The ratio of total number of packets to
                the number of packets analyzed. The default is `0`, which indicates that the
                VDS should analyze all packets. The maximum value is `1000`, which
-               indicates an analysis rate of 0.001%.
+               indicates an analysis rate of 0.001%!
+               (MISSING)
         :param pulumi.Input[bool] network_resource_control_enabled: Set to `true` to enable
                network I/O control. Default: `false`.
         :param pulumi.Input[str] network_resource_control_version: The version of network I/O
@@ -4213,6 +4229,7 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
                `vlan_range` definitions are allowed, but they must not overlap. Example
                below:
                
+               <!--Start PulumiCodeChooser -->
                ```python
                import pulumi
                import pulumi_vsphere as vsphere
@@ -4228,6 +4245,7 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
                    ),
                ])
                ```
+               <!--End PulumiCodeChooser -->
         :param pulumi.Input[int] vmotion_maximum_mbit: The maximum allowed usage for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_reservation_mbit: The amount of guaranteed bandwidth for the vmotion traffic class, in Mbits/sec.
         :param pulumi.Input[int] vmotion_share_count: The amount of shares to allocate to the vmotion traffic class for a custom share level.
@@ -4885,7 +4903,8 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
         The ratio of total number of packets to
         the number of packets analyzed. The default is `0`, which indicates that the
         VDS should analyze all packets. The maximum value is `1000`, which
-        indicates an analysis rate of 0.001%.
+        indicates an analysis rate of 0.001%!
+        (MISSING)
         """
         return pulumi.get(self, "netflow_sampling_rate")
 
@@ -5109,6 +5128,7 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
         `vlan_range` definitions are allowed, but they must not overlap. Example
         below:
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -5124,6 +5144,7 @@ class DistributedVirtualSwitch(pulumi.CustomResource):
             ),
         ])
         ```
+        <!--End PulumiCodeChooser -->
         """
         return pulumi.get(self, "vlan_ranges")
 

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/file.py

@@ -295,8 +295,10 @@ class File(pulumi.CustomResource):
                  __props__=None):
         """
         ## Example Usage
+
         ### Uploading a File
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -308,8 +310,11 @@ class File(pulumi.CustomResource):
             destination_file="/my/dst/path/custom_ubuntu.vmdk",
             source_file="/my/src/path/custom_ubuntu.vmdk")
         ```
+        <!--End PulumiCodeChooser -->
+
         ### Copying a File
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -323,6 +328,7 @@ class File(pulumi.CustomResource):
             source_datastore="datastore-01",
             source_file="/my/src/path/custom_ubuntu.vmdk")
         ```
+        <!--End PulumiCodeChooser -->
 
         :param str resource_name: The name of the resource.
         :param pulumi.ResourceOptions opts: Options for the resource.
@@ -351,8 +357,10 @@ class File(pulumi.CustomResource):
                  opts: Optional[pulumi.ResourceOptions] = None):
         """
         ## Example Usage
+
         ### Uploading a File
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -364,8 +372,11 @@ class File(pulumi.CustomResource):
             destination_file="/my/dst/path/custom_ubuntu.vmdk",
             source_file="/my/src/path/custom_ubuntu.vmdk")
         ```
+        <!--End PulumiCodeChooser -->
+
         ### Copying a File
 
+        <!--Start PulumiCodeChooser -->
         ```python
         import pulumi
         import pulumi_vsphere as vsphere
@@ -379,6 +390,7 @@ class File(pulumi.CustomResource):
             source_datastore="datastore-01",
             source_file="/my/src/path/custom_ubuntu.vmdk")
         ```
+        <!--End PulumiCodeChooser -->
 
         :param str resource_name: The name of the resource.
         :param FileArgs args: The arguments to use to populate this resource's properties.

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_compute_cluster.py

@@ -91,6 +91,7 @@ def get_compute_cluster(datacenter_id: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -99,6 +100,7 @@ def get_compute_cluster(datacenter_id: Optional[str] = None,
     compute_cluster = vsphere.get_compute_cluster(name="cluster-01",
         datacenter_id=datacenter.id)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str datacenter_id: The managed object reference ID
@@ -137,6 +139,7 @@ def get_compute_cluster_output(datacenter_id: Optional[pulumi.Input[Optional[str
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -145,6 +148,7 @@ def get_compute_cluster_output(datacenter_id: Optional[pulumi.Input[Optional[str
     compute_cluster = vsphere.get_compute_cluster(name="cluster-01",
         datacenter_id=datacenter.id)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str datacenter_id: The managed object reference ID

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_compute_cluster_host_group.py

@@ -85,6 +85,7 @@ def get_compute_cluster_host_group(compute_cluster_id: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -99,6 +100,7 @@ def get_compute_cluster_host_group(compute_cluster_id: Optional[str] = None,
         vm_group_name="vm_group1",
         affinity_host_group_name=host_group1.name)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str compute_cluster_id: The [managed object reference ID][docs-about-morefs]
@@ -131,6 +133,7 @@ def get_compute_cluster_host_group_output(compute_cluster_id: Optional[pulumi.In
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -145,6 +148,7 @@ def get_compute_cluster_host_group_output(compute_cluster_id: Optional[pulumi.In
         vm_group_name="vm_group1",
         affinity_host_group_name=host_group1.name)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str compute_cluster_id: The [managed object reference ID][docs-about-morefs]

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_content_library.py

@@ -62,12 +62,14 @@ def get_content_library(name: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
 
     library = vsphere.get_content_library(name="Content Library")
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str name: The name of the content library.
@@ -92,12 +94,14 @@ def get_content_library_output(name: Optional[pulumi.Input[str]] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
 
     library = vsphere.get_content_library(name="Content Library")
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str name: The name of the content library.

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_custom_attribute.py

@@ -76,12 +76,14 @@ def get_custom_attribute(name: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
 
     attribute = vsphere.get_custom_attribute(name="test-attribute")
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str name: The name of the custom attribute.
@@ -112,12 +114,14 @@ def get_custom_attribute_output(name: Optional[pulumi.Input[str]] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
 
     attribute = vsphere.get_custom_attribute(name="test-attribute")
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str name: The name of the custom attribute.

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_datacenter.py

@@ -63,12 +63,14 @@ def get_datacenter(name: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
 
     datacenter = vsphere.get_datacenter(name="dc-01")
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str name: The name of the datacenter. This can be a name or path.
@@ -100,12 +102,14 @@ def get_datacenter_output(name: Optional[pulumi.Input[Optional[str]]] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
 
     datacenter = vsphere.get_datacenter(name="dc-01")
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str name: The name of the datacenter. This can be a name or path.

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_datastore.py

@@ -73,6 +73,7 @@ def get_datastore(datacenter_id: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -81,6 +82,7 @@ def get_datastore(datacenter_id: Optional[str] = None,
     datastore = vsphere.get_datastore(name="datastore-01",
         datacenter_id=datacenter.id)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str datacenter_id: The managed object reference ID
@@ -113,6 +115,7 @@ def get_datastore_output(datacenter_id: Optional[pulumi.Input[Optional[str]]] =
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -121,6 +124,7 @@ def get_datastore_output(datacenter_id: Optional[pulumi.Input[Optional[str]]] =
     datastore = vsphere.get_datastore(name="datastore-01",
         datacenter_id=datacenter.id)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str datacenter_id: The managed object reference ID

{pulumi_vsphere-4.10.0a1709368772 → pulumi_vsphere-4.10.0a1710160860}/pulumi_vsphere/get_datastore_cluster.py

@@ -73,6 +73,7 @@ def get_datastore_cluster(datacenter_id: Optional[str] = None,
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -81,6 +82,7 @@ def get_datastore_cluster(datacenter_id: Optional[str] = None,
     datastore_cluster = vsphere.get_datastore_cluster(name="datastore-cluster-01",
         datacenter_id=datacenter.id)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str datacenter_id: The managed object reference
@@ -114,6 +116,7 @@ def get_datastore_cluster_output(datacenter_id: Optional[pulumi.Input[Optional[s
 
     ## Example Usage
 
+    <!--Start PulumiCodeChooser -->
     ```python
     import pulumi
     import pulumi_vsphere as vsphere
@@ -122,6 +125,7 @@ def get_datastore_cluster_output(datacenter_id: Optional[pulumi.Input[Optional[s
     datastore_cluster = vsphere.get_datastore_cluster(name="datastore-cluster-01",
         datacenter_id=datacenter.id)
     ```
+    <!--End PulumiCodeChooser -->
 
 
     :param str datacenter_id: The managed object reference