passagemath-doc-pdf 10.5.7__tar.gz → 10.5.9__tar.gz

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: passagemath-doc-pdf
-Version: 10.5.7
+Version: 10.5.9
 Summary: passagemath: Documentation in PDF format
 Author-Email: The Sage Developers <sage-support@googlegroups.com>
 License: GNU General Public License (GPL) v2 or later; Creative Commons Attribution-ShareAlike 3.0 Unported

passagemath_doc_pdf-10.5.9/VERSION.txt

@@ -0,0 +1 @@
+10.5.9

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/developer/coding_in_cython.rst

@@ -32,13 +32,13 @@ up-to-date information or check out the
 to get started immediately.
 
 
-Writing cython code in Sage
+Writing Cython code in Sage
 ===========================
 
 There are several ways to create and build Cython code in Sage.
 
-#. In the Sage Notebook, begin any cell with ``%cython``. When you
-   evaluate that cell,
+#. In the Sage notebook or the Sage command line, begin any cell with
+   a line containing ``%%cython``. When you evaluate that cell,
 
    #. It is saved to a file.
 
@@ -53,22 +53,21 @@ There are several ways to create and build Cython code in Sage.
       program that was compiled to create the ``.so`` file.
 
    #. A ``cpdef`` or ``def`` function, say ``testfunction``, defined in
-      a ``%cython`` cell in a worksheet can be imported and made available
-      in a different ``%cython`` cell within the same worksheet by
+      a ``%%cython`` cell in a worksheet can be imported and made available
+      in a different ``%%cython`` cell within the same worksheet by
       importing it as shown below::
 
-          %cython
+          %%cython
           from __main__ import testfunction
 
-#. Create an ``.spyx`` file and attach or load it from the command
-   line. This is similar to creating a ``%cython`` cell in the
-   notebook but works completely from the command line (and not from
-   the notebook).
+   Refer to :meth:`sage.repl.ipython_extension.SageMagics.cython`.
+
+#. Create an ``.spyx`` file and attach or load it
+   from the command line.
 
 #. Create a ``.pyx`` file and add it to the Sage library.
    Then run ``sage -b`` to rebuild Sage.
 
-
 Attaching or loading .spyx files
 ================================
 

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/installation/conda.rst

@@ -86,14 +86,14 @@ Here we assume that you are using a git checkout.
 
     .. code-block:: shell
 
-        $ mamba env create --file environment-dev-3.11-linux.yml --name sage-dev
+        $ mamba env create --file environment-3.11-linux.yml --name sage-dev
         $ conda activate sage-dev
 
   .. tab:: conda
 
     .. code-block:: shell
 
-        $ conda env create --file environment-dev-3.11-linux.yml --name sage-dev
+        $ conda env create --file environment-3.11-linux.yml --name sage-dev
         $ conda activate sage-dev
 
   Alternatively, you can use ``environment-3.11-linux.yml`` or
@@ -137,7 +137,7 @@ After editing any Cython files, rebuild the Sage library using::
 
 In order to update the conda environment later, you can run::
 
-  $ mamba env update --file environment-dev-3.11-linux.yml --name sage-dev
+  $ mamba env update --file environment-3.11-linux.yml --name sage-dev
 
 To build the documentation, use::
 
@@ -156,5 +156,5 @@ To build the documentation, use::
 
   You can update the conda lock files by running
   ``.github/workflows/conda-lock-update.py`` or by running
-  ``conda-lock --platform linux-64 --filename environment-dev-3.11-linux.yml --lockfile environment-dev-3.11-linux.lock``
+  ``conda-lock --platform linux-64 --filename environment-3.11-linux.yml --lockfile environment-3.11-linux.lock``
   manually.

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/installation/meson.rst

@@ -13,8 +13,7 @@ Assume we're starting from a clean repo and a fully set up conda environment:
         
 .. CODE-BLOCK:: shell-session
 
-    $ ./bootstrap-conda
-    $ mamba env create --file src/environment-dev-3.11.yml --name sage-dev
+    $ mamba env create --file src/environment-3.11.yml --name sage-dev
     $ conda activate sage-dev
 
 Alternatively, install all build requirements as described in section

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/references/index.rst

@@ -277,6 +277,10 @@ REFERENCES:
 .. [Ap1997] \T. Apostol, Modular functions and Dirichlet series in
             number theory, Springer, 1997 (2nd ed), section 3.7--3.9.
 
+.. [AP2024] William Atherton, Dmitrii V. Pasechnik, *Decline and Fall of the
+            ICALP 2008 Modular Decomposition algorithm*, 2024.
+            :arxiv:`2404.14049`.
+
 .. [APR2001] George E. Andrews, Peter Paule, Axel Riese,
              *MacMahon's partition analysis: the Omega package*,
              European J. Combin. 22 (2001), no. 7, 887--904.
@@ -496,6 +500,9 @@ REFERENCES:
 .. [BeBo2009] Olivier Bernardi and Nicolas Bonichon, *Intervals in Catalan
               lattices and realizers of triangulations*, JCTA 116 (2009)
 
+.. [Best2021] Alex J. Best: Tools and Techniques for Rational Points on Curves.
+              PhD Thesis, Boston University, 2021.
+
 .. [BBGL2008] \A. Blondin Massé, S. Brlek, A. Garon, and S. Labbé,
               Combinatorial properties of f -palindromes in the
               Thue-Morse sequence. Pure Math. Appl.,
@@ -970,6 +977,10 @@ REFERENCES:
             Anal. Appl. 15 (1994) 804-823.
             :doi:`10.1137/S0895479892230031`
 
+.. [BL1995] W. Bosma, H.W. Lenstra: Complete Systems of Two Addition Laws for
+            Elliptic Curves. Journal of Number Theory, volume 53, issue 2,
+            pages 229-240. 1995.
+
 .. [BHMPW20a] Tom Braden, June Huh, Jacob P. Matherne, Nicholas Proudfoot,
              and Botong Wang, *A semi-small decomposition of the Chow
              ring of a matroid*, :arxiv:`2002.03341` (2020).

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/repl/index.rst

@@ -1,3 +1,5 @@
+.. _section-command-line:
+
 The Sage Command Line
 =====================
 
@@ -5,8 +7,8 @@ The Sage Read-Eval-Print-Loop (REPL) is based on IPython. In this
 document, you'll find how the IPython integration works. You should
 also be familiar with the documentation for IPython.
 
-For more details about using the Sage command line, see the Sage
-tutorial.
+For more details about using the Sage command line, see `the Sage
+tutorial <../../tutorial/index.html>`_.
 
 Running Sage
 ------------

passagemath_doc_pdf-10.5.9/doc/en/reference/spkg/execnet.rst

@@ -0,0 +1,86 @@
+.. _spkg_execnet:
+
+execnet: Rapid multi-Python deployment
+================================================
+
+Description
+-----------
+
+Rapid multi-Python deployment
+
+License
+-------
+
+Upstream Contact
+----------------
+
+https://pypi.org/project/execnet/
+
+
+Type
+----
+
+standard
+
+
+Dependencies
+------------
+
+- $(PYTHON)
+- :ref:`spkg_pip`
+
+Version Information
+-------------------
+
+package-version.txt::
+
+    2.1.1
+
+version_requirements.txt::
+
+    execnet
+
+
+Equivalent System Packages
+--------------------------
+
+.. tab:: Arch Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo pacman -S python-execnet 
+
+
+.. tab:: Debian/Ubuntu
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo apt-get install python3-execnet 
+
+
+.. tab:: Fedora/Redhat/CentOS
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo yum install python3-execnet 
+
+
+.. tab:: Gentoo Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo emerge dev-python/execnet 
+
+
+.. tab:: Void Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo xbps-install python3-execnet 
+
+
+
+If the system package is installed and if the (experimental) option
+``--enable-system-site-packages`` is passed to ``./configure``, then ``./configure``
+will check if the system package can be used.
+

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/index_alph.rst

@@ -69,7 +69,6 @@ Packages are in alphabetical order.
    cvxpy
    cycler
    cylp
-   cypari
    cysignals
    cython
    d3js

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/index_standard.rst

@@ -7,7 +7,6 @@ Mathematics
 * :ref:`spkg_combinatorial_designs`
 * :ref:`spkg_conway_polynomials`
 * :ref:`spkg_cvxopt`
-* :ref:`spkg_cypari`
 * :ref:`spkg_eclib`
 * :ref:`spkg_ecm`
 * :ref:`spkg_elliptic_curves`

passagemath_doc_pdf-10.5.9/doc/en/reference/spkg/iniconfig.rst

@@ -0,0 +1,86 @@
+.. _spkg_iniconfig:
+
+iniconfig: Brain-dead simple config-ini parsing
+=========================================================
+
+Description
+-----------
+
+Brain-dead simple config-ini parsing
+
+License
+-------
+
+Upstream Contact
+----------------
+
+https://pypi.org/project/iniconfig/
+
+
+Type
+----
+
+standard
+
+
+Dependencies
+------------
+
+- $(PYTHON)
+- :ref:`spkg_pip`
+
+Version Information
+-------------------
+
+package-version.txt::
+
+    2.0.0
+
+version_requirements.txt::
+
+    iniconfig
+
+
+Equivalent System Packages
+--------------------------
+
+.. tab:: Arch Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo pacman -S python-iniconfig 
+
+
+.. tab:: Debian/Ubuntu
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo apt-get install python3-iniconfig 
+
+
+.. tab:: Fedora/Redhat/CentOS
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo yum install python3-iniconfig 
+
+
+.. tab:: Gentoo Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo emerge dev-python/iniconfig 
+
+
+.. tab:: Void Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo xbps-install python3-iniconfig 
+
+
+
+If the system package is installed and if the (experimental) option
+``--enable-system-site-packages`` is passed to ``./configure``, then ``./configure``
+will check if the system package can be used.
+

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/macaulay2.rst

@@ -39,6 +39,7 @@ Dependencies
 - :ref:`spkg_fflas_ffpack`
 - :ref:`spkg_flint`
 - :ref:`spkg_frobby`
+- :ref:`spkg_gc`
 - :ref:`spkg_gdbm`
 - :ref:`spkg_gfan`
 - :ref:`spkg_gfortran`

passagemath_doc_pdf-10.5.9/doc/en/reference/spkg/pyproject_api.rst

@@ -0,0 +1,86 @@
+.. _spkg_pyproject_api:
+
+pyproject_api: API to interact with the python pyproject.toml based projects
+======================================================================================
+
+Description
+-----------
+
+API to interact with the python pyproject.toml based projects
+
+License
+-------
+
+Upstream Contact
+----------------
+
+https://pypi.org/project/pyproject-api/
+
+
+Type
+----
+
+standard
+
+
+Dependencies
+------------
+
+- $(PYTHON)
+- $(PYTHON_TOOLCHAIN)
+
+Version Information
+-------------------
+
+package-version.txt::
+
+    1.7.1
+
+version_requirements.txt::
+
+    pyproject-api
+
+
+Equivalent System Packages
+--------------------------
+
+.. tab:: Arch Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo pacman -S python-pyproject-api 
+
+
+.. tab:: Debian/Ubuntu
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo apt-get install python3-pyproject-api 
+
+
+.. tab:: Fedora/Redhat/CentOS
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo yum install python3-pyproject-api 
+
+
+.. tab:: Gentoo Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo emerge dev-python/pyproject-api 
+
+
+.. tab:: Void Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo xbps-install python3-pyproject-api 
+
+
+
+If the system package is installed and if the (experimental) option
+``--enable-system-site-packages`` is passed to ``./configure``, then ``./configure``
+will check if the system package can be used.
+

passagemath_doc_pdf-10.5.9/doc/en/reference/spkg/pyproject_hooks.rst

@@ -0,0 +1,86 @@
+.. _spkg_pyproject_hooks:
+
+pyproject_hooks: Wrappers to call pyproject.toml-based build backend hooks.
+=====================================================================================
+
+Description
+-----------
+
+Wrappers to call pyproject.toml-based build backend hooks.
+
+License
+-------
+
+Upstream Contact
+----------------
+
+https://pypi.org/project/pyproject_hooks/
+
+
+Type
+----
+
+standard
+
+
+Dependencies
+------------
+
+- $(PYTHON)
+- :ref:`spkg_pip`
+
+Version Information
+-------------------
+
+package-version.txt::
+
+    1.1.0
+
+version_requirements.txt::
+
+    pyproject_hooks
+
+
+Equivalent System Packages
+--------------------------
+
+.. tab:: Arch Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo pacman -S python-pyproject-hooks 
+
+
+.. tab:: Debian/Ubuntu
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo apt-get install python3-pyproject-hooks 
+
+
+.. tab:: Fedora/Redhat/CentOS
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo yum install python3-pyproject-hooks 
+
+
+.. tab:: Gentoo Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo emerge dev-python/pyproject-hooks 
+
+
+.. tab:: Void Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo xbps-install python3-pyproject-hooks 
+
+
+
+If the system package is installed and if the (experimental) option
+``--enable-system-site-packages`` is passed to ``./configure``, then ``./configure``
+will check if the system package can be used.
+

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/pyproject_metadata.rst

@@ -47,6 +47,20 @@ version_requirements.txt::
 Equivalent System Packages
 --------------------------
 
+.. tab:: Arch Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo pacman -S python-pyproject-metadata 
+
+
+.. tab:: Debian/Ubuntu
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo apt-get install python3-pyproject-metadata 
+
+
 .. tab:: Fedora/Redhat/CentOS
 
    .. CODE-BLOCK:: bash
@@ -61,6 +75,13 @@ Equivalent System Packages
        $ sudo emerge dev-python/pyproject-metadata 
 
 
+.. tab:: Void Linux
+
+   .. CODE-BLOCK:: bash
+
+       $ sudo xbps-install python3-pyproject-metadata 
+
+
 
 If the system package is installed and if the (experimental) option
 ``--enable-system-site-packages`` is passed to ``./configure``, then ``./configure``

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sage_conf.rst

@@ -163,11 +163,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-conf ~= 10.5.7.0
+    passagemath-conf ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sage_docbuild.rst

@@ -43,11 +43,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-docbuild ~= 10.5.7.0
+    passagemath-docbuild ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sage_setup.rst

@@ -25,11 +25,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-setup ~= 10.5.7.0
+    passagemath-setup ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sage_sws2rst.rst

@@ -30,11 +30,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-sws2rst ~= 10.5.7.0
+    passagemath-sws2rst ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sagemath_benzene.rst

@@ -84,11 +84,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-benzene ~= 10.5.7.0
+    passagemath-benzene ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sagemath_bliss.rst

@@ -54,11 +54,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-bliss ~= 10.5.7.0
+    passagemath-bliss ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sagemath_brial.rst

@@ -43,7 +43,6 @@ Dependencies
 - $(PYTHON)
 - $(PYTHON_TOOLCHAIN)
 - :ref:`spkg_brial`
-- :ref:`spkg_cypari`
 - :ref:`spkg_cython`
 - :ref:`spkg_iml`
 - :ref:`spkg_linbox`
@@ -56,17 +55,18 @@ Dependencies
 - :ref:`spkg_sagemath_environment`
 - :ref:`spkg_sagemath_flint`
 - :ref:`spkg_sagemath_modules`
+- :ref:`spkg_sagemath_pari`
 
 Version Information
 -------------------
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-brial ~= 10.5.7.0
+    passagemath-brial ~= 10.5.9.0
 
 
 Equivalent System Packages

{passagemath_doc_pdf-10.5.7 → passagemath_doc_pdf-10.5.9}/doc/en/reference/spkg/sagemath_buckygen.rst

@@ -87,11 +87,11 @@ Version Information
 
 package-version.txt::
 
-    10.5.7
+    10.5.9
 
 version_requirements.txt::
 
-    passagemath-buckygen ~= 10.5.7.0
+    passagemath-buckygen ~= 10.5.9.0
 
 
 Equivalent System Packages