parasolid-kit 0.1.0.dev4__tar.gz → 0.3.3__tar.gz

parasolid_kit-0.3.3/.gitattributes

@@ -0,0 +1,18 @@
+# Viewer assets are hash-pinned at build time and runtime on every platform.
+/src/parasolid_kit/interop/preview/static/*.html text eol=lf
+# Generated bundles preserve upstream license/template/shader whitespace verbatim.
+/src/parasolid_kit/interop/preview/static/*.css text eol=lf -whitespace
+/src/parasolid_kit/interop/preview/static/*.js text eol=lf -whitespace
+/viewer/** text eol=lf
+/viewer/**/*.glb -text
+/viewer/third-party/*.txt -text -whitespace
+
+# Release baselines and synthetic wire bytes are hash-pinned on every platform.
+/corpus/expected/**/*.json text eol=lf
+/corpus/generated/synthetic/**/*.x_t -text
+/corpus/generated/synthetic/**/*.x_b -text
+
+# Compare distributed licenses byte-for-byte across all wheel platforms.
+/LICENSE text eol=lf
+/LICENSES/*.txt text eol=lf
+/crates/parasolid-core/LICENSE* text eol=lf

parasolid_kit-0.3.3/CHANGELOG.md

@@ -0,0 +1,51 @@
+# Changelog
+
+## Unreleased
+
+- Add five exact legacy iCAD embedded 13006 profiles with pinned B-Rep roles
+  for Issues #6 and #7. Qualify BLEND_BOUND (59), its BLENDED_EDGE (56)
+  dependency, SPUN_SURF (68), and SP_CURVE (137) dependencies only for the
+  observed keys. The sampled 539 resources now parse without a catalog;
+  535 map completely and four retain explicit unsupported SPUN_SURF geometry.
+  See the [support matrix](docs/format-support.md#supported-profiles) for
+  per-key revisions, hashes and conversion limits.
+
+- Extend the exact iCAD V34 profile to revision 2 with the reviewed 13006
+  TORUS (54) definition and matching B-Rep roles. The profile ID is
+  `icad-sch34101-13006-r2`; other schema keys and unknown base types retain
+  their existing boundaries. This core patch supports catalog-free parsing
+  of qualified toroidal saved solids in downstream iCAD readers.
+
+- Add the exact iCAD `SCH_3401212_34101_13006` built-in profile for extracted
+  Parasolid streams, including pinned source B-Rep roles. Unknown base types and
+  nearby keys still require their own reviewed support. Native ICD extraction,
+  part ownership, placement and unit interpretation remain caller responsibilities.
+
+## 0.2.0 — unreleased
+
+- Add the exact Onshape `SCH_3701212_37102_13006` profile, including analytic
+  geometry, direct NURBS curves/surfaces, intersection and trimmed curves,
+  surface-parametric curves, and fully declared multi-part transmit blocks.
+  Other modeller keys still require their own reviewed profile or an explicit
+  schema provider.
+- Preserve intersection chart and limit positions in the source B-Rep.
+- Add the bundled local viewer and bounded UV/intersection conversion.
+  Parser, OCCT conversion, STEP export and preview retain separate support limits.
+- Extend release validation with native NURBS coefficients, sampled parametric
+  geometry, producer tolerance reporting and hashed native evidence.
+
+### Migration from 0.1.0
+
+- The V30 profile is `onshape-sch30000-r3`; the new current Onshape profile is
+  `onshape-sch37102-13006-r3`. Consumers that pin profile IDs or hashes must
+  update their expectations for these exact keys.
+- Intersection definitions include `chart_points`, `start_points` and
+  `end_points`. Strict JSON consumers must accept these additional fields.
+- Core area and volume require complete planar polygonal boundaries. Curved
+  boundaries return `None`, including cases previously assigned incorrect
+  endpoint-polygon metrics. Bounding boxes still use source topological vertices.
+- Reading a NURBS definition does not establish OCCT/STEP/preview conversion for
+  every rational, closed or periodic variant. Assemblies, native CAD containers
+  and SolidWorks delta application remain outside the complete parser contract.
+
+See [format support](docs/format-support.md) for exact keys and stage boundaries.

{parasolid_kit-0.1.0.dev4 → parasolid_kit-0.3.3}/Cargo.lock

@@ -88,7 +88,7 @@ checksum = "9f7c3e4beb33f85d45ae3e3a1792185706c8e16d043238c593331cc7cd313b50"
 
 [[package]]
 name = "parasolid-core"
-version = "0.1.0-dev4"
+version = "0.3.3"
 dependencies = [
  "serde_json",
  "sha2",
@@ -96,7 +96,7 @@ dependencies = [
 
 [[package]]
 name = "parasolid-python"
-version = "0.1.0-dev4"
+version = "0.3.3"
 dependencies = [
  "parasolid-core",
  "pyo3",

{parasolid_kit-0.1.0.dev4 → parasolid_kit-0.3.3}/Cargo.toml

@@ -4,11 +4,11 @@ exclude = ["fuzz"]
 resolver = "3"
 
 [workspace.package]
-version = "0.1.0-dev4"
+version = "0.3.3"
 edition = "2024"
 rust-version = "1.88"
 description = "Schema-aware parser core for Parasolid X_T and X_B data"
-license = "MIT"
+license = "MIT AND Apache-2.0"
 repository = "https://github.com/monozukuri-ai/parasolid-kit"
 
 [workspace.dependencies]

parasolid_kit-0.3.3/LICENSES/Apache-2.0.txt

@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

parasolid_kit-0.3.3/PKG-INFO

@@ -0,0 +1,141 @@
+Metadata-Version: 2.4
+Name: parasolid-kit
+Version: 0.3.3
+Classifier: Development Status :: 5 - Production/Stable
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3 :: Only
+Classifier: Programming Language :: Python :: 3.10
+Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Classifier: Programming Language :: Python :: 3.13
+Classifier: Programming Language :: Rust
+Classifier: Typing :: Typed
+Requires-Dist: cadquery>=2.8,<2.9 ; extra == 'cadquery'
+Requires-Dist: numba>=0.62.1,<0.63 ; platform_machine == 'x86_64' and sys_platform == 'darwin' and extra == 'cadquery'
+Requires-Dist: cadquery-ocp-novtk>=7.9.3.1,<7.10 ; extra == 'occt'
+Provides-Extra: cadquery
+Provides-Extra: occt
+License-File: LICENSE
+License-File: LICENSES/Apache-2.0.txt
+Summary: Schema-aware Python parser for Parasolid X_T and X_B data
+License-Expression: MIT AND Apache-2.0
+Requires-Python: >=3.10
+Description-Content-Type: text/markdown; charset=UTF-8; variant=GFM
+Project-URL: Repository, https://github.com/monozukuri-ai/parasolid-kit
+
+# parasolid-kit
+
+A schema-aware parser for Parasolid X_T and X_B transmit files. A safe Rust
+core handles parsing and geometry mapping; Python exposes immutable typed
+models and a command-line interface. The project focuses on reading and
+preserving the transmitted structure for inspection and conversion pipelines.
+
+Rust applications can use [parasolid-core](crates/parasolid-core/README.md)
+directly, without Python.
+
+## Features
+
+- Inspect headers and map supported topology, analytic geometry and NURBS to
+  a typed source B-Rep.
+- Compare X_T/X_B documents after pointer remapping and reconstruct an
+  unmodified parsed X_B document byte-for-byte.
+- Report structured diagnostics and enforce configurable resource limits.
+- Use optional OCCT conversion, validated STEP export, CadQuery shapes and a
+  local viewer with face/edge source picking, body visibility and section views.
+
+## Installation
+
+Python 3.10+ is required. The base package has no runtime dependencies:
+
+```bash
+python -m pip install parasolid-kit
+```
+
+For STEP export and the viewer, install the OCCT profile:
+
+```bash
+python -m pip install "parasolid-kit[occt]"
+```
+
+See [installation](docs/installation.md) for platform requirements, the separate
+CadQuery profile, downloaded wheels and source builds.
+
+## Quick start
+
+For an input covered by a built-in profile:
+
+```bash
+parasolid-kit inspect model.x_b          # Header only; no schema catalog needed.
+parasolid-kit check model.x_b            # Parse and check the source B-Rep.
+parasolid-kit check model.x_t --json     # Structured report.
+parasolid-kit compare model.x_t model.x_b
+```
+
+The same workflow is available in Python:
+
+```python
+from parasolid_kit import read_brep
+
+parsed = read_brep("model.x_b")
+print(parsed.summary.to_dict())
+print(parsed.complete)
+print(parsed.brep.diagnostics)
+```
+
+`complete` describes source B-Rep mapping. Geometry conversion and a native CAD
+file's saved configuration have separate requirements. Use `check` when
+completeness must affect the CLI exit code. See the [Python API](docs/api.md)
+and [CLI reference](docs/api.md#cli) for lower-level operations and diagnostics.
+
+## Local viewer
+
+To try the viewer from a source checkout with Rust 1.88+ installed:
+
+```bash
+python -m pip install ".[occt]"
+parasolid-kit viewer model.x_t --source-unit mm
+```
+
+Choose the input's actual unit; it is never inferred. `view` is an alias.
+The command opens a local URL; Ctrl-C stops serving and keeps the generated
+files. Node.js and a CDN are unnecessary at runtime.
+
+![Viewer showing two boxes and the selected face's source ID, node and byte range](docs/images/viewer.png)
+
+Project-authored synthetic two-body fixture, rendered with Linux/SwiftShader.
+See [preview controls and saving](docs/api.md#bounded-local-preview),
+[display limits](docs/format-support.md#viewer-display-boundary) and
+[viewer development](viewer/README.md).
+
+## Supported inputs
+
+Built-in profiles cover exact Onshape V30/V13/current, extracted iCAD and
+SolidWorks partition keys. Each has `verified_subset` coverage and requires
+zero user fields. Consult the [support matrix](docs/format-support.md#supported-profiles)
+for exact keys and geometry limits; matching a key does not guarantee that
+all records are supported. Other keys or uncovered types need an explicit
+[schema catalog](docs/schema-catalogs.md).
+
+Native CAD containers, assemblies and SolidWorks delta application are outside
+the complete parser contract. Parsing, OCCT conversion, STEP export and preview
+have separate coverage. See [format support and limitations](docs/format-support.md).
+
+## Documentation
+
+| Topic | Guide |
+|---|---|
+| Setup and optional runtimes | [Installation](docs/installation.md) |
+| Python models, conversion and CLI | [API reference](docs/api.md) |
+| External schema providers | [Schema catalogs](docs/schema-catalogs.md) |
+| Supported inputs and geometry | [Support matrix](docs/format-support.md) |
+| Profile sources and validation | [Built-in profiles](docs/builtin-profiles.md) |
+| Release changes | [Changelog](CHANGELOG.md) |
+| Maintainer verification | [Release gates](docs/releasing.md), [corpus policy](corpus/README.md) |
+
+## License
+
+The distribution is licensed under `MIT AND Apache-2.0`: the original
+implementation uses [MIT](LICENSE), and adopted partial readers use
+[Apache-2.0](LICENSES/Apache-2.0.txt). See [reader provenance](crates/parasolid-core/PARTIAL_READERS.md)
+and [viewer notices](viewer/README.md#dependencies-and-licenses).
+

parasolid_kit-0.3.3/README.md

@@ -0,0 +1,115 @@
+# parasolid-kit
+
+A schema-aware parser for Parasolid X_T and X_B transmit files. A safe Rust
+core handles parsing and geometry mapping; Python exposes immutable typed
+models and a command-line interface. The project focuses on reading and
+preserving the transmitted structure for inspection and conversion pipelines.
+
+Rust applications can use [parasolid-core](crates/parasolid-core/README.md)
+directly, without Python.
+
+## Features
+
+- Inspect headers and map supported topology, analytic geometry and NURBS to
+  a typed source B-Rep.
+- Compare X_T/X_B documents after pointer remapping and reconstruct an
+  unmodified parsed X_B document byte-for-byte.
+- Report structured diagnostics and enforce configurable resource limits.
+- Use optional OCCT conversion, validated STEP export, CadQuery shapes and a
+  local viewer with face/edge source picking, body visibility and section views.
+
+## Installation
+
+Python 3.10+ is required. The base package has no runtime dependencies:
+
+```bash
+python -m pip install parasolid-kit
+```
+
+For STEP export and the viewer, install the OCCT profile:
+
+```bash
+python -m pip install "parasolid-kit[occt]"
+```
+
+See [installation](docs/installation.md) for platform requirements, the separate
+CadQuery profile, downloaded wheels and source builds.
+
+## Quick start
+
+For an input covered by a built-in profile:
+
+```bash
+parasolid-kit inspect model.x_b          # Header only; no schema catalog needed.
+parasolid-kit check model.x_b            # Parse and check the source B-Rep.
+parasolid-kit check model.x_t --json     # Structured report.
+parasolid-kit compare model.x_t model.x_b
+```
+
+The same workflow is available in Python:
+
+```python
+from parasolid_kit import read_brep
+
+parsed = read_brep("model.x_b")
+print(parsed.summary.to_dict())
+print(parsed.complete)
+print(parsed.brep.diagnostics)
+```
+
+`complete` describes source B-Rep mapping. Geometry conversion and a native CAD
+file's saved configuration have separate requirements. Use `check` when
+completeness must affect the CLI exit code. See the [Python API](docs/api.md)
+and [CLI reference](docs/api.md#cli) for lower-level operations and diagnostics.
+
+## Local viewer
+
+To try the viewer from a source checkout with Rust 1.88+ installed:
+
+```bash
+python -m pip install ".[occt]"
+parasolid-kit viewer model.x_t --source-unit mm
+```
+
+Choose the input's actual unit; it is never inferred. `view` is an alias.
+The command opens a local URL; Ctrl-C stops serving and keeps the generated
+files. Node.js and a CDN are unnecessary at runtime.
+
+![Viewer showing two boxes and the selected face's source ID, node and byte range](docs/images/viewer.png)
+
+Project-authored synthetic two-body fixture, rendered with Linux/SwiftShader.
+See [preview controls and saving](docs/api.md#bounded-local-preview),
+[display limits](docs/format-support.md#viewer-display-boundary) and
+[viewer development](viewer/README.md).
+
+## Supported inputs
+
+Built-in profiles cover exact Onshape V30/V13/current, extracted iCAD and
+SolidWorks partition keys. Each has `verified_subset` coverage and requires
+zero user fields. Consult the [support matrix](docs/format-support.md#supported-profiles)
+for exact keys and geometry limits; matching a key does not guarantee that
+all records are supported. Other keys or uncovered types need an explicit
+[schema catalog](docs/schema-catalogs.md).
+
+Native CAD containers, assemblies and SolidWorks delta application are outside
+the complete parser contract. Parsing, OCCT conversion, STEP export and preview
+have separate coverage. See [format support and limitations](docs/format-support.md).
+
+## Documentation
+
+| Topic | Guide |
+|---|---|
+| Setup and optional runtimes | [Installation](docs/installation.md) |
+| Python models, conversion and CLI | [API reference](docs/api.md) |
+| External schema providers | [Schema catalogs](docs/schema-catalogs.md) |
+| Supported inputs and geometry | [Support matrix](docs/format-support.md) |
+| Profile sources and validation | [Built-in profiles](docs/builtin-profiles.md) |
+| Release changes | [Changelog](CHANGELOG.md) |
+| Maintainer verification | [Release gates](docs/releasing.md), [corpus policy](corpus/README.md) |
+
+## License
+
+The distribution is licensed under `MIT AND Apache-2.0`: the original
+implementation uses [MIT](LICENSE), and adopted partial readers use
+[Apache-2.0](LICENSES/Apache-2.0.txt). See [reader provenance](crates/parasolid-core/PARTIAL_READERS.md)
+and [viewer notices](viewer/README.md#dependencies-and-licenses).