osis-python 0.7.0__tar.gz → 0.7.3__tar.gz

{osis_python-0.7.0/src/osis_python.egg-info → osis_python-0.7.3}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: osis-python
-Version: 0.7.0
+Version: 0.7.3
 Summary: A Python client library for Osis APDL
 Author-email: "CCCC Highway Consultant Co. Ltd." <support@osisbim.com>
 License-Expression: MIT
@@ -53,10 +53,12 @@ pip install osis-python -i https://pypi.org/simple
 
 ## Requirements
 
-- OSIS >= 5.0 (includes the required Python runtime environment)
+- OSIS >= 5.1 (short-form command names like `N`/`Ele`/`Sec` are accepted by both the converter and runtime)
 - Python >= 3.8
 - **Solver-only mode** additionally requires the solver distribution that ships `PySolver.dll` (e.g. `D:\OSIS_Solver\Rbin64`).
 
+> OSIS 5.1 HTTP server bug workaround: the `/OSIS_Run` command-stream splitter does not strip `//` line comments, so a comment line and the command that follows it are merged into one bad command. The pyosis `.out` converter already strips comments before sending; if you ever build a raw `.out` payload yourself, pre-process the file or use `osis_run()` through the generated `main.py`.
+
 ## Quick Start
 
 ### 1. Using OSISEngine (Recommended)
@@ -398,7 +400,7 @@ lc.create_nforce(4, fx=200000, fy=0, fz=0)
 engine.solve()
 ```
 
-## End-to-End Demo
+## End-to-End Demo (Solver-Only Mode)
 
 See [`tests/pyosis_demo.py`](tests/pyosis_demo.py) for a runnable end-to-end example that:
 
@@ -408,3 +410,109 @@ See [`tests/pyosis_demo.py`](tests/pyosis_demo.py) for a runnable end-to-end exa
 - Exports LCND / LCEF / EnvND / EnvEF results to CSV
 
 The demo reuses the prep modules from `tests/output/output_py/25m简支小箱梁中梁-solveronly/`, so it serves both as a smoke test and a copy-paste template.
+
+## Batch Execution
+
+For non-interactive workflows (large models, customer scripts that took tens of minutes per command), wrap your script in `with batch():` to merge **all** OSIS commands into a **single** `OSIS_Run` HTTP request when the block exits:
+
+```python
+from pyosis import batch
+
+with batch():
+    engine.clear()
+    engine.clc()
+    engine.control.set_gravity_acceleration(9.8066)
+    engine.material.create_conc(no=1, name="C50", ...)
+    for i in range(1000):
+        engine.node.create(no=i + 1, x=i * 0.1, y=0.0, z=0.0)
+    for i in range(999):
+        engine.element.create_beam3d(no=i + 1, node1=i + 1, node2=i + 2, ...)
+```
+
+Server-side `OSIS_Run` calls `SplitOsisCommands` once and then a single `Execution(&v)`, so the network round-trip cost is paid exactly once instead of once per command. Intermediate reads (`get`, `all`) auto-flush the buffer first, so cached objects stay correct.
+
+Notes:
+
+- Nested `with batch():` is supported — the inner exit does not flush; only the outermost exit does.
+- If the block raises, the buffered commands added since `__enter__` are discarded.
+- `flush()` can be called inside the block to force an early flush.
+- `next_no()` (auto-numbering) raises inside `batch()` because it would need to query the server mid-batch; pass `no=...` explicitly, or run auto-numbering outside the batch.
+
+Benchmark on the `25m简支小箱梁中梁` project (`.out` of ~3000 commands): before `batch()` ~3000 round-trips; with `batch()` 3 round-trips (clear + clc + one final flush), **~1000x compression**.
+
+## .out → pyosis Converter
+
+pyosis ships a converter that turns an OSIS command stream (`.out`) into a clean, runnable pyosis project. This is the easiest way to migrate a legacy APDL/SML script.
+
+```bash
+python src/pyosis/transfer/out_to_python.py path/to/model.out path/to/output_project
+```
+
+Generated layout:
+
+```
+output_project/
+└── prep/
+    ├── main.py          # Entry point (batch mode, runs all 10 modules)
+    ├── _1_control.py    # Global control parameters
+    ├── _2_property.py   # Geometry / coordinate / damping / creep properties
+    ├── _3_material.py   # Materials
+    ├── _4_section.py    # Sections (incl. mesh)
+    ├── _5_node.py       # Nodes
+    ├── _6_element.py    # Elements
+    ├── _7_boundary.py   # Boundaries
+    ├── _8_loadcase.py   # Load cases
+    ├── _9_analysis.py   # Analysis settings (settlement / live / dynamic / stability)
+    └── _10_stage.py     # Construction stages
+```
+
+The generated `main.py` wraps the entire modelling flow in `with batch():`, so the whole project is sent to OSIS in one HTTP request — matching the OSIS server's native batching path.
+
+Run it:
+
+```bash
+cd output_project
+python prep/main.py            # build the model
+python prep/main.py --solve    # build + solve
+```
+
+Notes on the converter:
+
+- Both long-form command names (`Node`, `Element`, `Section`, `Material`, `LoadCase`, `Boundary`, `Stage`) and OSIS 5.1 short-form aliases (`N`, `Ele`, `Sec`/`SecOff`/`SecMesh`, `Mat`, `LC`, `Bd`, `Stg`) are recognized and normalized.
+- `SectionMesh` is emitted with the new `Index, PartID, MeshMethod, MeshSize` layout (Section 7.3.6.2) — `PartID = 1` for concrete sections, `2` for templated composite sections.
+- `Spline3D` is dispatched to `engine.geometry.create_general` / `create_natural` / `create_arc2d` / `create_arc3d` based on the type field.
+- Commands that are not yet modeled are passed through verbatim via `engine.run(...)` so the model still runs; rewrite them into pyosis calls manually if needed.
+
+## Chained Method Calls
+
+The dataclass returned by `get()` supports method chaining without server round-trips:
+
+```python
+with batch():
+    lc = engine.load.create("Self-weight", load_case_type="D")
+    lc.create_gravity()
+    lc.create_nforce(node=1, fx=0, fy=-1000, fz=0)
+    # ↑ all three commands are queued; the OSIS_Run request only fires at exit
+```
+
+Accessing identity attributes (`lc.no`, `lc.name`) does not touch the server. Accessing data fields (`lc.type`, `lc.elements`) materializes the object (one-time flush + query), then caches it.
+
+> OSIS 5.1 HTTP server bug workaround: the `/OSIS_Run` command-stream splitter does not strip `//` line comments, so a comment line and the command that follows it are merged into one bad command. The pyosis `.out` converter already strips comments before sending; if you ever build a raw `.out` payload yourself, pre-process the file or use `osis_run()` through the generated `main.py`.
+
+## End-to-End Demo (GUI Mode)
+
+The single-file demo [`tests/demo_gui.py`](tests/demo_gui.py) is a merged version of the project generated from `tests/output/xiaoxiangliang.out`. Run it against an open OSIS 5.1+ GUI:
+
+```bash
+python tests/demo_gui.py            # build the model
+python tests/demo_gui.py --solve    # build + solve
+```
+
+The file contains the engine setup, all 10 `build_*` functions (control / property / material / section / node / element / boundary / loadcase / analysis / stage), and a `build_model()` driver that wraps everything in `with batch():` — so ~250 commands hit OSIS in a single `OSIS_Run` request.
+
+To regenerate both the single-file demo and the multi-module project:
+
+```bash
+python tests/_merge_demo_gui.py                                    # -> tests/demo_gui.py
+python src/pyosis/transfer/out_to_python.py tests/output/xiaoxiangliang.out tests/output/output_py/xiaoxiangliang
+```

{osis_python-0.7.0 → osis_python-0.7.3}/README.md

@@ -22,10 +22,12 @@ pip install osis-python -i https://pypi.org/simple
 
 ## Requirements
 
-- OSIS >= 5.0 (includes the required Python runtime environment)
+- OSIS >= 5.1 (short-form command names like `N`/`Ele`/`Sec` are accepted by both the converter and runtime)
 - Python >= 3.8
 - **Solver-only mode** additionally requires the solver distribution that ships `PySolver.dll` (e.g. `D:\OSIS_Solver\Rbin64`).
 
+> OSIS 5.1 HTTP server bug workaround: the `/OSIS_Run` command-stream splitter does not strip `//` line comments, so a comment line and the command that follows it are merged into one bad command. The pyosis `.out` converter already strips comments before sending; if you ever build a raw `.out` payload yourself, pre-process the file or use `osis_run()` through the generated `main.py`.
+
 ## Quick Start
 
 ### 1. Using OSISEngine (Recommended)
@@ -367,7 +369,7 @@ lc.create_nforce(4, fx=200000, fy=0, fz=0)
 engine.solve()
 ```
 
-## End-to-End Demo
+## End-to-End Demo (Solver-Only Mode)
 
 See [`tests/pyosis_demo.py`](tests/pyosis_demo.py) for a runnable end-to-end example that:
 
@@ -377,3 +379,109 @@ See [`tests/pyosis_demo.py`](tests/pyosis_demo.py) for a runnable end-to-end exa
 - Exports LCND / LCEF / EnvND / EnvEF results to CSV
 
 The demo reuses the prep modules from `tests/output/output_py/25m简支小箱梁中梁-solveronly/`, so it serves both as a smoke test and a copy-paste template.
+
+## Batch Execution
+
+For non-interactive workflows (large models, customer scripts that took tens of minutes per command), wrap your script in `with batch():` to merge **all** OSIS commands into a **single** `OSIS_Run` HTTP request when the block exits:
+
+```python
+from pyosis import batch
+
+with batch():
+    engine.clear()
+    engine.clc()
+    engine.control.set_gravity_acceleration(9.8066)
+    engine.material.create_conc(no=1, name="C50", ...)
+    for i in range(1000):
+        engine.node.create(no=i + 1, x=i * 0.1, y=0.0, z=0.0)
+    for i in range(999):
+        engine.element.create_beam3d(no=i + 1, node1=i + 1, node2=i + 2, ...)
+```
+
+Server-side `OSIS_Run` calls `SplitOsisCommands` once and then a single `Execution(&v)`, so the network round-trip cost is paid exactly once instead of once per command. Intermediate reads (`get`, `all`) auto-flush the buffer first, so cached objects stay correct.
+
+Notes:
+
+- Nested `with batch():` is supported — the inner exit does not flush; only the outermost exit does.
+- If the block raises, the buffered commands added since `__enter__` are discarded.
+- `flush()` can be called inside the block to force an early flush.
+- `next_no()` (auto-numbering) raises inside `batch()` because it would need to query the server mid-batch; pass `no=...` explicitly, or run auto-numbering outside the batch.
+
+Benchmark on the `25m简支小箱梁中梁` project (`.out` of ~3000 commands): before `batch()` ~3000 round-trips; with `batch()` 3 round-trips (clear + clc + one final flush), **~1000x compression**.
+
+## .out → pyosis Converter
+
+pyosis ships a converter that turns an OSIS command stream (`.out`) into a clean, runnable pyosis project. This is the easiest way to migrate a legacy APDL/SML script.
+
+```bash
+python src/pyosis/transfer/out_to_python.py path/to/model.out path/to/output_project
+```
+
+Generated layout:
+
+```
+output_project/
+└── prep/
+    ├── main.py          # Entry point (batch mode, runs all 10 modules)
+    ├── _1_control.py    # Global control parameters
+    ├── _2_property.py   # Geometry / coordinate / damping / creep properties
+    ├── _3_material.py   # Materials
+    ├── _4_section.py    # Sections (incl. mesh)
+    ├── _5_node.py       # Nodes
+    ├── _6_element.py    # Elements
+    ├── _7_boundary.py   # Boundaries
+    ├── _8_loadcase.py   # Load cases
+    ├── _9_analysis.py   # Analysis settings (settlement / live / dynamic / stability)
+    └── _10_stage.py     # Construction stages
+```
+
+The generated `main.py` wraps the entire modelling flow in `with batch():`, so the whole project is sent to OSIS in one HTTP request — matching the OSIS server's native batching path.
+
+Run it:
+
+```bash
+cd output_project
+python prep/main.py            # build the model
+python prep/main.py --solve    # build + solve
+```
+
+Notes on the converter:
+
+- Both long-form command names (`Node`, `Element`, `Section`, `Material`, `LoadCase`, `Boundary`, `Stage`) and OSIS 5.1 short-form aliases (`N`, `Ele`, `Sec`/`SecOff`/`SecMesh`, `Mat`, `LC`, `Bd`, `Stg`) are recognized and normalized.
+- `SectionMesh` is emitted with the new `Index, PartID, MeshMethod, MeshSize` layout (Section 7.3.6.2) — `PartID = 1` for concrete sections, `2` for templated composite sections.
+- `Spline3D` is dispatched to `engine.geometry.create_general` / `create_natural` / `create_arc2d` / `create_arc3d` based on the type field.
+- Commands that are not yet modeled are passed through verbatim via `engine.run(...)` so the model still runs; rewrite them into pyosis calls manually if needed.
+
+## Chained Method Calls
+
+The dataclass returned by `get()` supports method chaining without server round-trips:
+
+```python
+with batch():
+    lc = engine.load.create("Self-weight", load_case_type="D")
+    lc.create_gravity()
+    lc.create_nforce(node=1, fx=0, fy=-1000, fz=0)
+    # ↑ all three commands are queued; the OSIS_Run request only fires at exit
+```
+
+Accessing identity attributes (`lc.no`, `lc.name`) does not touch the server. Accessing data fields (`lc.type`, `lc.elements`) materializes the object (one-time flush + query), then caches it.
+
+> OSIS 5.1 HTTP server bug workaround: the `/OSIS_Run` command-stream splitter does not strip `//` line comments, so a comment line and the command that follows it are merged into one bad command. The pyosis `.out` converter already strips comments before sending; if you ever build a raw `.out` payload yourself, pre-process the file or use `osis_run()` through the generated `main.py`.
+
+## End-to-End Demo (GUI Mode)
+
+The single-file demo [`tests/demo_gui.py`](tests/demo_gui.py) is a merged version of the project generated from `tests/output/xiaoxiangliang.out`. Run it against an open OSIS 5.1+ GUI:
+
+```bash
+python tests/demo_gui.py            # build the model
+python tests/demo_gui.py --solve    # build + solve
+```
+
+The file contains the engine setup, all 10 `build_*` functions (control / property / material / section / node / element / boundary / loadcase / analysis / stage), and a `build_model()` driver that wraps everything in `with batch():` — so ~250 commands hit OSIS in a single `OSIS_Run` request.
+
+To regenerate both the single-file demo and the multi-module project:
+
+```bash
+python tests/_merge_demo_gui.py                                    # -> tests/demo_gui.py
+python src/pyosis/transfer/out_to_python.py tests/output/xiaoxiangliang.out tests/output/output_py/xiaoxiangliang
+```

{osis_python-0.7.0 → osis_python-0.7.3/src/osis_python.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: osis-python
-Version: 0.7.0
+Version: 0.7.3
 Summary: A Python client library for Osis APDL
 Author-email: "CCCC Highway Consultant Co. Ltd." <support@osisbim.com>
 License-Expression: MIT
@@ -53,10 +53,12 @@ pip install osis-python -i https://pypi.org/simple
 
 ## Requirements
 
-- OSIS >= 5.0 (includes the required Python runtime environment)
+- OSIS >= 5.1 (short-form command names like `N`/`Ele`/`Sec` are accepted by both the converter and runtime)
 - Python >= 3.8
 - **Solver-only mode** additionally requires the solver distribution that ships `PySolver.dll` (e.g. `D:\OSIS_Solver\Rbin64`).
 
+> OSIS 5.1 HTTP server bug workaround: the `/OSIS_Run` command-stream splitter does not strip `//` line comments, so a comment line and the command that follows it are merged into one bad command. The pyosis `.out` converter already strips comments before sending; if you ever build a raw `.out` payload yourself, pre-process the file or use `osis_run()` through the generated `main.py`.
+
 ## Quick Start
 
 ### 1. Using OSISEngine (Recommended)
@@ -398,7 +400,7 @@ lc.create_nforce(4, fx=200000, fy=0, fz=0)
 engine.solve()
 ```
 
-## End-to-End Demo
+## End-to-End Demo (Solver-Only Mode)
 
 See [`tests/pyosis_demo.py`](tests/pyosis_demo.py) for a runnable end-to-end example that:
 
@@ -408,3 +410,109 @@ See [`tests/pyosis_demo.py`](tests/pyosis_demo.py) for a runnable end-to-end exa
 - Exports LCND / LCEF / EnvND / EnvEF results to CSV
 
 The demo reuses the prep modules from `tests/output/output_py/25m简支小箱梁中梁-solveronly/`, so it serves both as a smoke test and a copy-paste template.
+
+## Batch Execution
+
+For non-interactive workflows (large models, customer scripts that took tens of minutes per command), wrap your script in `with batch():` to merge **all** OSIS commands into a **single** `OSIS_Run` HTTP request when the block exits:
+
+```python
+from pyosis import batch
+
+with batch():
+    engine.clear()
+    engine.clc()
+    engine.control.set_gravity_acceleration(9.8066)
+    engine.material.create_conc(no=1, name="C50", ...)
+    for i in range(1000):
+        engine.node.create(no=i + 1, x=i * 0.1, y=0.0, z=0.0)
+    for i in range(999):
+        engine.element.create_beam3d(no=i + 1, node1=i + 1, node2=i + 2, ...)
+```
+
+Server-side `OSIS_Run` calls `SplitOsisCommands` once and then a single `Execution(&v)`, so the network round-trip cost is paid exactly once instead of once per command. Intermediate reads (`get`, `all`) auto-flush the buffer first, so cached objects stay correct.
+
+Notes:
+
+- Nested `with batch():` is supported — the inner exit does not flush; only the outermost exit does.
+- If the block raises, the buffered commands added since `__enter__` are discarded.
+- `flush()` can be called inside the block to force an early flush.
+- `next_no()` (auto-numbering) raises inside `batch()` because it would need to query the server mid-batch; pass `no=...` explicitly, or run auto-numbering outside the batch.
+
+Benchmark on the `25m简支小箱梁中梁` project (`.out` of ~3000 commands): before `batch()` ~3000 round-trips; with `batch()` 3 round-trips (clear + clc + one final flush), **~1000x compression**.
+
+## .out → pyosis Converter
+
+pyosis ships a converter that turns an OSIS command stream (`.out`) into a clean, runnable pyosis project. This is the easiest way to migrate a legacy APDL/SML script.
+
+```bash
+python src/pyosis/transfer/out_to_python.py path/to/model.out path/to/output_project
+```
+
+Generated layout:
+
+```
+output_project/
+└── prep/
+    ├── main.py          # Entry point (batch mode, runs all 10 modules)
+    ├── _1_control.py    # Global control parameters
+    ├── _2_property.py   # Geometry / coordinate / damping / creep properties
+    ├── _3_material.py   # Materials
+    ├── _4_section.py    # Sections (incl. mesh)
+    ├── _5_node.py       # Nodes
+    ├── _6_element.py    # Elements
+    ├── _7_boundary.py   # Boundaries
+    ├── _8_loadcase.py   # Load cases
+    ├── _9_analysis.py   # Analysis settings (settlement / live / dynamic / stability)
+    └── _10_stage.py     # Construction stages
+```
+
+The generated `main.py` wraps the entire modelling flow in `with batch():`, so the whole project is sent to OSIS in one HTTP request — matching the OSIS server's native batching path.
+
+Run it:
+
+```bash
+cd output_project
+python prep/main.py            # build the model
+python prep/main.py --solve    # build + solve
+```
+
+Notes on the converter:
+
+- Both long-form command names (`Node`, `Element`, `Section`, `Material`, `LoadCase`, `Boundary`, `Stage`) and OSIS 5.1 short-form aliases (`N`, `Ele`, `Sec`/`SecOff`/`SecMesh`, `Mat`, `LC`, `Bd`, `Stg`) are recognized and normalized.
+- `SectionMesh` is emitted with the new `Index, PartID, MeshMethod, MeshSize` layout (Section 7.3.6.2) — `PartID = 1` for concrete sections, `2` for templated composite sections.
+- `Spline3D` is dispatched to `engine.geometry.create_general` / `create_natural` / `create_arc2d` / `create_arc3d` based on the type field.
+- Commands that are not yet modeled are passed through verbatim via `engine.run(...)` so the model still runs; rewrite them into pyosis calls manually if needed.
+
+## Chained Method Calls
+
+The dataclass returned by `get()` supports method chaining without server round-trips:
+
+```python
+with batch():
+    lc = engine.load.create("Self-weight", load_case_type="D")
+    lc.create_gravity()
+    lc.create_nforce(node=1, fx=0, fy=-1000, fz=0)
+    # ↑ all three commands are queued; the OSIS_Run request only fires at exit
+```
+
+Accessing identity attributes (`lc.no`, `lc.name`) does not touch the server. Accessing data fields (`lc.type`, `lc.elements`) materializes the object (one-time flush + query), then caches it.
+
+> OSIS 5.1 HTTP server bug workaround: the `/OSIS_Run` command-stream splitter does not strip `//` line comments, so a comment line and the command that follows it are merged into one bad command. The pyosis `.out` converter already strips comments before sending; if you ever build a raw `.out` payload yourself, pre-process the file or use `osis_run()` through the generated `main.py`.
+
+## End-to-End Demo (GUI Mode)
+
+The single-file demo [`tests/demo_gui.py`](tests/demo_gui.py) is a merged version of the project generated from `tests/output/xiaoxiangliang.out`. Run it against an open OSIS 5.1+ GUI:
+
+```bash
+python tests/demo_gui.py            # build the model
+python tests/demo_gui.py --solve    # build + solve
+```
+
+The file contains the engine setup, all 10 `build_*` functions (control / property / material / section / node / element / boundary / loadcase / analysis / stage), and a `build_model()` driver that wraps everything in `with batch():` — so ~250 commands hit OSIS in a single `OSIS_Run` request.
+
+To regenerate both the single-file demo and the multi-module project:
+
+```bash
+python tests/_merge_demo_gui.py                                    # -> tests/demo_gui.py
+python src/pyosis/transfer/out_to_python.py tests/output/xiaoxiangliang.out tests/output/output_py/xiaoxiangliang
+```

{osis_python-0.7.0 → osis_python-0.7.3}/src/osis_python.egg-info/SOURCES.txt

@@ -20,7 +20,6 @@ src/pyosis/core/all_func.py
 src/pyosis/core/apdl_sync.py
 src/pyosis/core/basic_manager.py
 src/pyosis/core/batch.py
-src/pyosis/core/build.py
 src/pyosis/core/client.py
 src/pyosis/core/command.py
 src/pyosis/core/engine.py

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/__init__.py

@@ -7,8 +7,7 @@ A library for extending OSIS functionality.
 A library that allows users to use CAE with great flexibility.
 """
 
-__version__ = "0.7.0"
-__author__ = "CCCC Highway Consultant Co. Ltd." # 中交公路规划设计院 - 工程技术研究中心 - lzh - wjh - myf
+__version__ = "0.7.3"
 
 from .core.engine import OSISEngine
 from .core.batch import batch, flush, batch_state, BatchError

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/boundary/manager.py

@@ -536,7 +536,7 @@ class BoundaryGroupManager(BasicManager):
         Returns:
             BoundaryGroup: 创建（或刷新后的）边界组对象
         '''
-        ok, err = osis_boundary_group(name, op, *param)
+        ok, err = osis_boundary_group(name, str(op).lower(), *param)
         if not ok:
             raise RuntimeError(f"创建边界组 {name} 失败: {err}")
         return self.get(name)

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/control/control.py

@@ -103,6 +103,32 @@ def osis_mod_loc_coor(bFlag: int=1):
     '''
     pass
 
+@REGISTRY.register("CalcRebarGravity")
+def osis_calc_rebar_gravity(bFlag: int=1):
+    '''
+    是否考虑钢筋钢束自重
+
+    Args:
+        bFlag (bool): 1=考虑，0=不考虑
+
+    Returns:
+        tuple (bool, str): 是否成功，失败原因
+    '''
+    pass
+
+@REGISTRY.register("IncRebar")
+def osis_inc_rebar(bFlag: int=1):
+    '''
+    是否考虑钢筋对截面几何特性的影响
+
+    Args:
+        bFlag (bool): 1=考虑，0=不考虑
+
+    Returns:
+        tuple (bool, str): 是否成功，失败原因
+    '''
+    pass
+
 @REGISTRY.register("IncTendon")
 def osis_inc_tendon(bFlag: int=1):
     '''

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/control/manager.py

@@ -27,6 +27,8 @@ from .control import (
     osis_calc_shear,
     osis_calc_rlx,
     osis_mod_loc_coor,
+    osis_calc_rebar_gravity,
+    osis_inc_rebar,
     osis_inc_tendon,
 )
 from .io import osis_apdl
@@ -230,6 +232,38 @@ class ControlManager:
         if not ok:
             raise RuntimeError(f"设置局部坐标轴修正失败: {err}")
 
+    def set_calc_rebar_gravity(self, enabled: Literal[0,1] = 1) -> None:
+        '''设置是否考虑钢筋钢束自重
+
+        Args:
+            enabled (int): 1=考虑，0=不考虑
+
+        Returns:
+            None
+
+        Raises:
+            RuntimeError: 设置失败时抛出异常
+        '''
+        ok, err = osis_calc_rebar_gravity(enabled)
+        if not ok:
+            raise RuntimeError(f"设置钢筋钢束自重考虑失败: {err}")
+
+    def set_inc_rebar(self, enabled: Literal[0,1] = 1) -> None:
+        '''设置是否考虑钢筋对截面几何特性的影响
+
+        Args:
+            enabled (int): 1=考虑，0=不考虑
+
+        Returns:
+            None
+
+        Raises:
+            RuntimeError: 设置失败时抛出异常
+        '''
+        ok, err = osis_inc_rebar(enabled)
+        if not ok:
+            raise RuntimeError(f"设置钢筋截面特性影响失败: {err}")
+
     def set_inc_tendon(self, enabled: Literal[0,1] = 1) -> None:
         '''设置是否考虑钢束自重及钢束对截面几何特性的影响
 

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/element/manager.py

@@ -316,7 +316,7 @@ class ElementGroupManager(BasicManager):
         Returns:
             ElementGroup: 创建的单元组对象
         """
-        ok, err = osis_element_group(name, op, *param)
+        ok, err = osis_element_group(name, str(op).lower(), *param)
         if not ok:
             raise RuntimeError(f"创建单元组 {name} 失败: {err}")
         return self.get(name)

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/geometry/manager.py

@@ -221,7 +221,7 @@ class GeometryManager(BasicManager):
         self,
         name: str,
         owner: Literal["LIVE", "TENDON"],
-        *coordinates: float,
+        coordinates: list[float],
     ) -> Spline:
         """创建或修改三维样条曲线（自然边界/NATURAL）。
 
@@ -240,9 +240,7 @@ class GeometryManager(BasicManager):
 
         Examples:
             >>> geometry_manager.create_natural("Lane1", "LIVE",
-            ...     0.0, 0.0, 0.0,
-            ...     10.0, 0.0, 0.0,
-            ...     20.0, 0.0, 0.0,
+            ...     [0.0, 0.0, 0.0, 10.0, 0.0, 0.0, 20.0, 0.0, 0.0],
             ... )
         """
         ok, err = osis_spline3d_natural(name, "NATURAL", owner, *coordinates)
@@ -254,7 +252,7 @@ class GeometryManager(BasicManager):
         self,
         name: str,
         owner: str,
-        *coordinates: float,
+        coordinates: list[float],
     ) -> Spline:
         """创建或修改三维样条曲线（2D圆弧/ARC2D）。
 
@@ -273,8 +271,7 @@ class GeometryManager(BasicManager):
 
         Examples:
             >>> geometry_manager.create_arc2d("Arc1", "TENDON",
-            ...     0.0, 0.0, 10.0,
-            ...     10.0, 0.0, 10.0,
+            ...     [0.0, 0.0, 10.0, 10.0, 0.0, 10.0],
             ... )
         """
         ok, err = osis_spline3d_arc2d(name, "ARC2D", owner, *coordinates)
@@ -286,7 +283,7 @@ class GeometryManager(BasicManager):
         self,
         name: str,
         owner: str,
-        *coordinates: float,
+        coordinates: list[float],
     ) -> Spline:
         """创建或修改三维样条曲线（3D圆弧/ARC3D）。
 
@@ -305,8 +302,7 @@ class GeometryManager(BasicManager):
 
         Examples:
             >>> geometry_manager.create_arc3d("Arc3d1", "TENDON",
-            ...     0.0, 0.0, 0.0, 20.0,
-            ...     10.0, 0.0, 5.0, 20.0,
+            ...     [0.0, 0.0, 0.0, 20.0, 10.0, 0.0, 5.0, 20.0],
             ... )
         """
         ok, err = osis_spline3d_arc3d(name, "ARC3D", owner, *coordinates)

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/live/manager.py

@@ -265,6 +265,7 @@ class LiveCase:
         Returns:
             更新后的 LiveCase 对象
         """
+        op = str(op).lower()
         if op in ("a", "m"):
             _MU_PARAM_COUNT = {
                 "SIMPLE": 4,
@@ -278,7 +279,7 @@ class LiveCase:
             grade_name, scalar, mu_flag = args[0], float(args[1]), int(args[2])
             rest = args[4:]
             if mu_flag == 1:
-                bridge_type = args[3] or "SIMPLE"
+                bridge_type = (args[3] or "SIMPLE").strip().upper()
                 mu_count = _MU_PARAM_COUNT.get(bridge_type, 1)
                 mu_params: list[float] = [float(x) for x in rest[:mu_count]]
                 lane_names: list[str] = list(rest[mu_count:])

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/load/manager.py

@@ -295,6 +295,8 @@ class LoadCase:
             elem, e_coord, n_range, *rest = args
             forces = [list(rest[i: i + 6]) for i in range(0, len(rest), 6)]
             return self.create_concentrated_force(elem,e_coord,is_moment=(type_key == "PTM"),forces=forces)
+        if type_key not in _creator:
+            raise ValueError(f"未知荷载类型: {type!r}，支持: {', '.join(_creator)}")
         return _creator[type_key](*args, **kwargs)
 
     def create_gravity(

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/material/manager.py

@@ -158,9 +158,10 @@ class MaterialManager(BasicManager):
             "REBAR": self.create_rebar,
             "CUSTOM": self.create_custom,
         }
-        if type not in _creator:
-            raise ValueError(f"未知材料类型: {type}")
-        return _creator[type](no, name, *args, **kwargs)
+        type_key = str(type).strip().upper()
+        if type_key not in _creator:
+            raise ValueError(f"未知材料类型: {type!r}，支持: {', '.join(_creator)}")
+        return _creator[type_key](no, name, *args, **kwargs)
 
     def create_conc(
         self,

{osis_python-0.7.0 → osis_python-0.7.3}/src/pyosis/property/manager.py

@@ -518,9 +518,9 @@ class DampingManager(BasicManager):
             raise ValueError(
                 f"未知阻尼类型: {type!r}，支持: {', '.join(sorted(_supported_types))}"
             )
-        if type_key == "modal":
+        if type_key == "MODAL":
             return self.create_modal(name, *args, **kwargs)
-        # type_key == "ryl"
+        # type_key == "RYL"
         method = args[0] if args else kwargs.get("method")
         _supported_methods = {0: "根据公式计算因子", 1: "自定义因子"}
         if method not in _supported_methods: