openscvx 0.5.3.dev41__tar.gz → 0.5.3.dev42__tar.gz

{openscvx-0.5.3.dev41/openscvx.egg-info → openscvx-0.5.3.dev42}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: openscvx
-Version: 0.5.3.dev41
+Version: 0.5.3.dev42
 Summary: A general Python-based successive convexification implementation which uses a JAX backend.
 Author-email: Chris Hayner and Griffin Norris <haynec@uw.edu>
 License: Apache Software License

openscvx-0.5.3.dev42/examples/frax/ur5e_assets/ur5e.urdf

@@ -0,0 +1,359 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- =================================================================================== -->
+<!-- |    This document was autogenerated by xacro from ur5e.xacro                     | -->
+<!-- |    EDITING THIS FILE BY HAND IS NOT RECOMMENDED                                 | -->
+<!-- =================================================================================== -->
+<robot name="ur5e_robot">
+  <!--
+    Base UR robot series xacro macro.
+
+    NOTE: this is NOT a URDF. It cannot directly be loaded by consumers
+    expecting a flattened '.urdf' file. See the top-level '.xacro' for that
+    (but note: that .xacro must still be processed by the xacro command).
+
+    For use in '.launch' files: use one of the 'load_urX.launch' convenience
+    launch files.
+
+    This file models the base kinematic chain of a UR robot, which then gets
+    parameterised by various configuration files to convert it into a UR3(e),
+    UR5(e), UR10(e) or UR16e.
+
+    NOTE: the default kinematic parameters (ie: link lengths, frame locations,
+    offets, etc) do not correspond to any particular robot. They are defaults
+    only. There WILL be non-zero offsets between the Forward Kinematics results
+    in TF (ie: robot_state_publisher) and the values reported by the Teach
+    Pendant.
+
+    For accurate (and robot-specific) transforms, the 'kinematics_parameters_file'
+    parameter MUST point to a .yaml file containing the appropriate values for
+    the targetted robot.
+
+    If using the UniversalRobots/Universal_Robots_ROS_Driver, follow the steps
+    described in the readme of that repository to extract the kinematic
+    calibration from the controller and generate the required .yaml file.
+
+    Main author of the migration to yaml configs: Ludovic Delval.
+
+    Contributors to previous versions (in no particular order):
+
+     - Felix Messmer
+     - Kelsey Hawkins
+     - Wim Meeussen
+     - Shaun Edwards
+     - Nadia Hammoudeh Garcia
+     - Dave Hershberger
+     - G. vd. Hoorn
+     - Philip Long
+     - Dave Coleman
+     - Miguel Prada
+     - Mathias Luedtke
+     - Marcel Schnirring
+     - Felix von Drigalski
+     - Felix Exner
+     - Jimmy Da Silva
+     - Ajit Krisshna N L
+     - Muhammad Asif Rana
+  -->
+  <!--
+    NOTE: the macro defined in this file is NOT part of the public API of this
+          package. Users CANNOT rely on this file being available, or stored in
+          this location. Nor can they rely on the existence of the macro.
+  -->
+  <transmission name="shoulder_pan_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="shoulder_pan_joint">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="shoulder_pan_motor">
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+  <transmission name="shoulder_lift_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="shoulder_lift_joint">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="shoulder_lift_motor">
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+  <transmission name="elbow_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="elbow_joint">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="elbow_motor">
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+  <transmission name="wrist_1_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_1_joint">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="wrist_1_motor">
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+  <transmission name="wrist_2_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_2_joint">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="wrist_2_motor">
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+  <transmission name="wrist_3_trans">
+    <type>transmission_interface/SimpleTransmission</type>
+    <joint name="wrist_3_joint">
+      <hardwareInterface>hardware_interface/PositionJointInterface</hardwareInterface>
+    </joint>
+    <actuator name="wrist_3_motor">
+      <mechanicalReduction>1</mechanicalReduction>
+    </actuator>
+  </transmission>
+  <!-- links: main serial chain -->
+  <link name="base_link"/>
+  <link name="base_link_inertia">
+    <visual>
+      <origin rpy="0 0 3.14159265359" xyz="0 0 0"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/base.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="0 0 3.14159265359" xyz="0 0 0"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/base.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="4.0"/>
+      <origin rpy="0 0 0" xyz="0 0 0"/>
+      <inertia ixx="0.00443333156" ixy="0.0" ixz="0.0" iyy="0.00443333156" iyz="0.0" izz="0.0072"/>
+    </inertial>
+  </link>
+  <link name="shoulder_link">
+    <visual>
+      <origin rpy="0 0 3.14159265359" xyz="0 0 0"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/shoulder.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="0 0 3.14159265359" xyz="0 0 0"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/shoulder.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="3.7"/>
+      <origin rpy="0 0 0" xyz="0 0 0"/>
+      <inertia ixx="0.010267495893" ixy="0.0" ixz="0.0" iyy="0.010267495893" iyz="0.0" izz="0.00666"/>
+    </inertial>
+  </link>
+  <link name="upper_arm_link">
+    <visual>
+      <origin rpy="1.57079632679 0 -1.57079632679" xyz="0 0 0.138"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/upperarm.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="1.57079632679 0 -1.57079632679" xyz="0 0 0.138"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/upperarm.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="8.393"/>
+      <origin rpy="0 1.57079632679 0" xyz="-0.2125 0.0 0.138"/>
+      <inertia ixx="0.133885781862" ixy="0.0" ixz="0.0" iyy="0.133885781862" iyz="0.0" izz="0.0151074"/>
+    </inertial>
+  </link>
+  <link name="forearm_link">
+    <visual>
+      <origin rpy="1.57079632679 0 -1.57079632679" xyz="0 0 0.007"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/forearm.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="1.57079632679 0 -1.57079632679" xyz="0 0 0.007"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/forearm.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="2.275"/>
+      <origin rpy="0 1.57079632679 0" xyz="-0.1961 0.0 0.007"/>
+      <inertia ixx="0.0312093550996" ixy="0.0" ixz="0.0" iyy="0.0312093550996" iyz="0.0" izz="0.004095"/>
+    </inertial>
+  </link>
+  <link name="wrist_1_link">
+    <visual>
+      <!-- TODO: Move this to a parameter -->
+      <origin rpy="1.57079632679 0 0" xyz="0 0 -0.127"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/wrist1.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="1.57079632679 0 0" xyz="0 0 -0.127"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/wrist1.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="1.219"/>
+      <origin rpy="0 0 0" xyz="0 0 0"/>
+      <inertia ixx="0.00255989897604" ixy="0.0" ixz="0.0" iyy="0.00255989897604" iyz="0.0" izz="0.0021942"/>
+    </inertial>
+  </link>
+  <link name="wrist_2_link">
+    <visual>
+      <origin rpy="0 0 0" xyz="0 0 -0.0997"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/wrist2.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="0 0 0" xyz="0 0 -0.0997"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/wrist2.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="1.219"/>
+      <origin rpy="0 0 0" xyz="0 0 0"/>
+      <inertia ixx="0.00255989897604" ixy="0.0" ixz="0.0" iyy="0.00255989897604" iyz="0.0" izz="0.0021942"/>
+    </inertial>
+  </link>
+  <link name="wrist_3_link">
+    <visual>
+      <origin rpy="1.57079632679 0 0" xyz="0 0 -0.0989"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/visual/wrist3.dae"/>
+      </geometry>
+      <material name="LightGrey">
+        <color rgba="0.7 0.7 0.7 1.0"/>
+      </material>
+    </visual>
+    <collision>
+      <origin rpy="1.57079632679 0 0" xyz="0 0 -0.0989"/>
+      <geometry>
+        <mesh filename="package://ur_description/meshes/ur5e/collision/wrist3.stl"/>
+      </geometry>
+    </collision>
+    <inertial>
+      <mass value="0.1879"/>
+      <origin rpy="0 0 0" xyz="0.0 0.0 -0.0229"/>
+      <inertia ixx="9.89041005217e-05" ixy="0.0" ixz="0.0" iyy="9.89041005217e-05" iyz="0.0" izz="0.0001321171875"/>
+    </inertial>
+  </link>
+  <!-- joints: main serial chain -->
+  <joint name="base_link-base_link_inertia" type="fixed">
+    <parent link="base_link"/>
+    <child link="base_link_inertia"/>
+    <!-- 'base_link' is REP-103 aligned (so X+ forward), while the internal
+           frames of the robot/controller have X+ pointing backwards.
+           Use the joint between 'base_link' and 'base_link_inertia' (a dummy
+           link/frame) to introduce the necessary rotation over Z (of pi rad).
+      -->
+    <origin rpy="0 0 3.14159265359" xyz="0 0 0"/>
+  </joint>
+  <joint name="shoulder_pan_joint" type="revolute">
+    <parent link="base_link_inertia"/>
+    <child link="shoulder_link"/>
+    <origin rpy="0 0 0" xyz="0 0 0.1625"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="150.0" lower="-6.28318530718" upper="6.28318530718" velocity="3.14159265359"/>
+    <dynamics damping="0" friction="0"/>
+  </joint>
+  <joint name="shoulder_lift_joint" type="revolute">
+    <parent link="shoulder_link"/>
+    <child link="upper_arm_link"/>
+    <origin rpy="1.570796327 0 0" xyz="0 0 0"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="150.0" lower="-6.28318530718" upper="6.28318530718" velocity="3.14159265359"/>
+    <dynamics damping="0" friction="0"/>
+  </joint>
+  <joint name="elbow_joint" type="revolute">
+    <parent link="upper_arm_link"/>
+    <child link="forearm_link"/>
+    <origin rpy="0 0 0" xyz="-0.425 0 0"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="150.0" lower="-3.14159265359" upper="3.14159265359" velocity="3.14159265359"/>
+    <dynamics damping="0" friction="0"/>
+  </joint>
+  <joint name="wrist_1_joint" type="revolute">
+    <parent link="forearm_link"/>
+    <child link="wrist_1_link"/>
+    <origin rpy="0 0 0" xyz="-0.3922 0 0.1333"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="28.0" lower="-6.28318530718" upper="6.28318530718" velocity="3.14159265359"/>
+    <dynamics damping="0" friction="0"/>
+  </joint>
+  <joint name="wrist_2_joint" type="revolute">
+    <parent link="wrist_1_link"/>
+    <child link="wrist_2_link"/>
+    <origin rpy="1.570796327 0 0" xyz="0 -0.0997 -2.0448811823e-11"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="28.0" lower="-6.28318530718" upper="6.28318530718" velocity="3.14159265359"/>
+    <dynamics damping="0" friction="0"/>
+  </joint>
+  <joint name="wrist_3_joint" type="revolute">
+    <parent link="wrist_2_link"/>
+    <child link="wrist_3_link"/>
+    <origin rpy="1.57079632659 3.14159265359 3.14159265359" xyz="0 0.0996 -2.04283014801e-11"/>
+    <axis xyz="0 0 1"/>
+    <limit effort="28.0" lower="-6.28318530718" upper="6.28318530718" velocity="3.14159265359"/>
+    <dynamics damping="0" friction="0"/>
+  </joint>
+  <!-- ROS-Industrial 'base' frame: base_link to UR 'Base' Coordinates transform -->
+  <link name="base"/>
+  <joint name="base_link-base_fixed_joint" type="fixed">
+    <!-- Note the rotation over Z of pi radians: as base_link is REP-103
+           aligned (ie: has X+ forward, Y+ left and Z+ up), this is needed
+           to correctly align 'base' with the 'Base' coordinate system of
+           the UR controller.
+      -->
+    <origin rpy="0 0 3.14159265359" xyz="0 0 0"/>
+    <parent link="base_link"/>
+    <child link="base"/>
+  </joint>
+  <!-- ROS-Industrial 'flange' frame: attachment point for EEF models -->
+  <link name="flange"/>
+  <joint name="wrist_3-flange" type="fixed">
+    <parent link="wrist_3_link"/>
+    <child link="flange"/>
+    <origin rpy="0 -1.57079632679 -1.57079632679" xyz="0 0 0"/>
+  </joint>
+  <!-- ROS-Industrial 'tool0' frame: all-zeros tool frame -->
+  <link name="tool0"/>
+  <joint name="flange-tool0" type="fixed">
+    <!-- default toolframe: X+ left, Y+ up, Z+ front -->
+    <origin rpy="1.57079632679 0 1.57079632679" xyz="0 0 0"/>
+    <parent link="flange"/>
+    <child link="tool0"/>
+  </joint>
+</robot>