openscad-cpp-evaluator 1.37.1__tar.gz → 1.37.2__tar.gz

{openscad_cpp_evaluator-1.37.1 → openscad_cpp_evaluator-1.37.2}/CLAUDE.md

@@ -507,6 +507,30 @@ Requires the same toolchain as `openscad_cpp_parser`: CMake ≥3.24, a C++20 com
 (macOS: `brew install bison`, the submodule's own CMakeLists auto-detects Homebrew's), Flex.
 GoogleTest is fetched automatically via `FetchContent`.
 
+### Building offline (Flathub)
+
+Every dependency is a `FetchContent` download pinned to a tag, commit or checksummed tarball --
+**keep it that way**: an unpinned `master` makes two builds of one tag differ and rules out a
+build that lists its sources by checksum. A build with no network (Flathub's) hands each one in as
+a source directory and forbids downloading:
+
+```bash
+cmake -S . -B build -DFETCHCONTENT_FULLY_DISCONNECTED=ON -DBUILD_TESTING=OFF \
+  -DFETCHCONTENT_SOURCE_DIR_MANIFOLD=...      -DFETCHCONTENT_SOURCE_DIR_CLIPPER2=... \
+  -DFETCHCONTENT_SOURCE_DIR_BOOST_CONFIG=...  -DFETCHCONTENT_SOURCE_DIR_BOOST_POLYGON=... \
+  -DFETCHCONTENT_SOURCE_DIR_FREETYPE=...      -DFETCHCONTENT_SOURCE_DIR_HARFBUZZ=... \
+  -DFETCHCONTENT_SOURCE_DIR_STB=...           -DFETCHCONTENT_SOURCE_DIR_CPP_LINENOISE=... \
+  -DFETCHCONTENT_SOURCE_DIR_NLOHMANN_JSON=...
+```
+
+That is the whole list for a wheel build (tests off; GoogleTest is the only other download, and
+TBB only with `MANIFOLD_PAR`). Clipper2 is Manifold's own download, pinned in Manifold's
+`cmake/manifoldDeps.cmake`; nlohmann_json is the parser's. FetchContent skips `PATCH_COMMAND` for a
+supplied source, so the root `CMakeLists.txt` runs `cmake/patch_manifold.cmake` itself when
+`FETCHCONTENT_SOURCE_DIR_MANIFOLD` is set -- otherwise an offline build would quietly ship the heap
+overflow that patch fixes. Verified 2026-10-06: a fully disconnected configure + build produced the
+Python module and CLI, and rendered text (freetype + harfbuzz).
+
 Run a single test binary or filter:
 
 ```bash

{openscad_cpp_evaluator-1.37.1 → openscad_cpp_evaluator-1.37.2}/CMakeLists.txt

@@ -141,6 +141,16 @@ FetchContent_Declare(
   # CsgLeafNode::Compose -- see cmake/patch_manifold.cmake.
   PATCH_COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/patch_manifold.cmake
 )
+# FetchContent runs PATCH_COMMAND only for a source it downloads itself, so
+# a build handed Manifold's source (FETCHCONTENT_SOURCE_DIR_MANIFOLD, as an
+# offline Flatpak build does) would otherwise compile it unpatched. The
+# script is idempotent, so running it here too is safe.
+if(FETCHCONTENT_SOURCE_DIR_MANIFOLD)
+  execute_process(
+    COMMAND ${CMAKE_COMMAND} -P ${CMAKE_CURRENT_SOURCE_DIR}/cmake/patch_manifold.cmake
+    WORKING_DIRECTORY ${FETCHCONTENT_SOURCE_DIR_MANIFOLD}
+    COMMAND_ERROR_IS_FATAL ANY)
+endif()
 FetchContent_MakeAvailable(manifold)
 
 # Boost.Polygon's Voronoi diagram builder, for roof()'s general (multi-
@@ -158,7 +168,13 @@ FetchContent_MakeAvailable(boost_config boost_polygon)
 # path, not add_subdirectory/MakeAvailable's target machinery. (It used to
 # supply stb_truetype.h for the font backend too; FreeType/HarfBuzz below
 # replaced that.)
-FetchContent_Declare(stb GIT_REPOSITORY https://github.com/nothings/stb.git GIT_TAG master GIT_SHALLOW TRUE)
+#
+# Pinned to a commit, as everything here is: stb has no releases, and
+# following master made two builds of the same tag differ, which also rules
+# out an offline (Flathub) build listing its sources by checksum.
+FetchContent_Declare(stb
+  URL https://github.com/nothings/stb/archive/2c980bb59875b0d32144a71867fbdebb2f77cd20.tar.gz
+  URL_HASH SHA256=9a955b1b49a4410088a2e0ee2a9c057c3c907d0c1d75454144cb980aca0ba515)
 FetchContent_MakeAvailable(stb)
 
 # FreeType (glyph outlines + face metrics) and HarfBuzz (shaping), the two
@@ -221,7 +237,10 @@ FetchContent_MakeAvailable(harfbuzz)
 # `CMAKE_SOURCE_DIR STREQUAL CMAKE_CURRENT_SOURCE_DIR`, so FetchContent_
 # MakeAvailable here only exposes its `linenoise` INTERFACE target, matching
 # the existing MANIFOLD_TEST-override pattern's intent for free.
-FetchContent_Declare(cpp_linenoise GIT_REPOSITORY https://github.com/yhirose/cpp-linenoise.git GIT_TAG master GIT_SHALLOW TRUE)
+# Pinned to a commit for the same reason as stb: no releases.
+FetchContent_Declare(cpp_linenoise
+  URL https://github.com/yhirose/cpp-linenoise/archive/b0e8b88f53be0de26252180b1b959c6dd67ec4a9.tar.gz
+  URL_HASH SHA256=e3e67ea401a9e6e19c300f025c51faab197b83254c83e6bef8ef452ee184548b)
 FetchContent_MakeAvailable(cpp_linenoise)
 
 # Embeds the bundled default font's (resources/fonts/) raw bytes into a

{openscad_cpp_evaluator-1.37.1 → openscad_cpp_evaluator-1.37.2}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: openscad_cpp_evaluator
-Version: 1.37.1
+Version: 1.37.2
 Summary: C++ OpenSCAD evaluator with Python bindings
 Author: NeuSCAD Contributors
 License-Expression: MIT

{openscad_cpp_evaluator-1.37.1 → openscad_cpp_evaluator-1.37.2}/pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "scikit_build_core.build"
 
 [project]
 name = "openscad_cpp_evaluator"
-version = "1.37.1"
+version = "1.37.2"
 description = "C++ OpenSCAD evaluator with Python bindings"
 readme = "README.md"
 requires-python = ">=3.12"

{openscad_cpp_evaluator-1.37.1 → openscad_cpp_evaluator-1.37.2}/uv.lock

@@ -55,7 +55,7 @@ wheels = [
 
 [[package]]
 name = "openscad-cpp-evaluator"
-version = "1.37.1"
+version = "1.37.2"
 source = { editable = "." }
 dependencies = [
     { name = "numpy" },