not1mm 25.6.10__tar.gz → 25.6.11.1__tar.gz

{not1mm-25.6.10 → not1mm-25.6.11.1}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: not1mm
-Version: 25.6.10
+Version: 25.6.11.1
 Summary: NOT1MM Logger
 Author-email: Michael Bridak <michael.bridak@gmail.com>
 License: GPL-3.0-or-later
@@ -108,6 +108,7 @@ Dynamic: license-file
     - [The Check Partial Window](#the-check-partial-window)
     - [The Rate Window](#the-rate-window)
     - [The DXCC window](#the-dxcc-window)
+    - [The Rotator Window (Work In Progress)](#the-rotator-window-work-in-progress)
     - [The Remote VFO Window](#the-remote-vfo-window)
   - [Cabrillo](#cabrillo)
   - [ADIF](#adif)
@@ -245,6 +246,7 @@ generated, 'cause I'm lazy, list of those who've submitted PR's.
 
 ## Recent Changes
 
+- [25-6-11] Added a rotator control widget.
 - [25-6-10] Merged PR from @dj1yfk correcting WPX prefix calculation.
 - [25-6-8] Revmoved SQLite WAL mode.
   - Rewrote DXCC tracker.
@@ -385,8 +387,8 @@ Under the `CW` tab, there are three options: i) `cwdaemon` that normally uses IP
 iii) `CAT` that sends Morse characters via rigctld if your radio supports it.
 
 For contests that require a serial number as part of the exchange, there is an option to pad it with leading zeroes,
-typically represented by the cut number "T". For example, serial number "001" can be sent as "TT1". The user can 
-configure the `CW Sent Nr Padding` character (default: T) and `CW Sent Nr Padding 
+typically represented by the cut number "T". For example, serial number "001" can be sent as "TT1". The user can
+configure the `CW Sent Nr Padding` character (default: T) and `CW Sent Nr Padding
 Length` (default: 3) or specify no padding by entering length "0".
 
 ### Cluster
@@ -696,6 +698,18 @@ This window shows you a grid of DXCC entities you've aquired and on what bands.
 
 ![DXCC Window](https://github.com/mbridak/not1mm/raw/master/pic/dxcc_window.png)
 
+### The Rotator Window (Work In Progress)
+
+`Window`>`Rotator`
+
+The Rotator window is a work in progress. Currently it blindly connects to a rigctld
+instance on it's default port of 4533.
+
+![Rotator Window](https://github.com/mbridak/not1mm/raw/master/pic/rotator_window.png)
+
+I myself don't have a rotator to test with. I'm a QRP wires in the trees, if only I
+had a tree, kind of guy. So we're kind of hoping this works. If not, don't use it.
+
 ### The Remote VFO Window
 
 You can control the VFO on a remote rig by following the directions listed in

{not1mm-25.6.10 → not1mm-25.6.11.1}/README.md

@@ -76,6 +76,7 @@
     - [The Check Partial Window](#the-check-partial-window)
     - [The Rate Window](#the-rate-window)
     - [The DXCC window](#the-dxcc-window)
+    - [The Rotator Window (Work In Progress)](#the-rotator-window-work-in-progress)
     - [The Remote VFO Window](#the-remote-vfo-window)
   - [Cabrillo](#cabrillo)
   - [ADIF](#adif)
@@ -213,6 +214,7 @@ generated, 'cause I'm lazy, list of those who've submitted PR's.
 
 ## Recent Changes
 
+- [25-6-11] Added a rotator control widget.
 - [25-6-10] Merged PR from @dj1yfk correcting WPX prefix calculation.
 - [25-6-8] Revmoved SQLite WAL mode.
   - Rewrote DXCC tracker.
@@ -353,8 +355,8 @@ Under the `CW` tab, there are three options: i) `cwdaemon` that normally uses IP
 iii) `CAT` that sends Morse characters via rigctld if your radio supports it.
 
 For contests that require a serial number as part of the exchange, there is an option to pad it with leading zeroes,
-typically represented by the cut number "T". For example, serial number "001" can be sent as "TT1". The user can 
-configure the `CW Sent Nr Padding` character (default: T) and `CW Sent Nr Padding 
+typically represented by the cut number "T". For example, serial number "001" can be sent as "TT1". The user can
+configure the `CW Sent Nr Padding` character (default: T) and `CW Sent Nr Padding
 Length` (default: 3) or specify no padding by entering length "0".
 
 ### Cluster
@@ -664,6 +666,18 @@ This window shows you a grid of DXCC entities you've aquired and on what bands.
 
 ![DXCC Window](https://github.com/mbridak/not1mm/raw/master/pic/dxcc_window.png)
 
+### The Rotator Window (Work In Progress)
+
+`Window`>`Rotator`
+
+The Rotator window is a work in progress. Currently it blindly connects to a rigctld
+instance on it's default port of 4533.
+
+![Rotator Window](https://github.com/mbridak/not1mm/raw/master/pic/rotator_window.png)
+
+I myself don't have a rotator to test with. I'm a QRP wires in the trees, if only I
+had a tree, kind of guy. So we're kind of hoping this works. If not, don't use it.
+
 ### The Remote VFO Window
 
 You can control the VFO on a remote rig by following the directions listed in

{not1mm-25.6.10 → not1mm-25.6.11.1}/not1mm/__main__.py

@@ -69,6 +69,7 @@ import not1mm.fsutils as fsutils
 from not1mm.logwindow import LogWindow
 from not1mm.checkwindow import CheckWindow
 from not1mm.dxcc_tracker import DXCCWindow
+from not1mm.rotator import RotatorWindow
 from not1mm.bandmap import BandMapWindow
 from not1mm.vfo import VfoWindow
 from not1mm.ratewindow import RateWindow
@@ -187,6 +188,8 @@ class MainWindow(QtWidgets.QMainWindow):
     rate_window = None
     statistics_window = None
     dxcc_window = None
+    rotator_window = None
+    voice_window = None
     settings = None
     lookup_service = None
     fldigi_util = None
@@ -311,6 +314,7 @@ class MainWindow(QtWidgets.QMainWindow):
         self.actionStatistics.triggered.connect(self.launch_stats_window)
         self.actionVFO.triggered.connect(self.launch_vfo)
         self.actionDXCC.triggered.connect(self.launch_dxcc_window)
+        self.actionRotator.triggered.connect(self.launch_rotator_window)
         self.actionRecalculate_Mults.triggered.connect(self.recalculate_mults)
         self.actionLoad_Call_History_File.triggered.connect(self.load_call_history)
 
@@ -679,6 +683,8 @@ class MainWindow(QtWidgets.QMainWindow):
             self.station = self.database.fetch_station()
             if self.station is None:
                 self.station = {}
+        if self.rotator_window is not None:
+            self.rotator_window.set_mygrid(self.station.get("GridSquare", ""))
         self.contact = self.database.empty_contact.copy()
         self.current_op = self.station.get("Call", "")
         self.voice_process.current_op = self.current_op
@@ -750,6 +756,16 @@ class MainWindow(QtWidgets.QMainWindow):
         self.dxcc_window.hide()
         self.dxcc_window.message.connect(self.dockwidget_message)
 
+        self.show_splash_msg("Setting up RotatorWindow.")
+        self.rotator_window = RotatorWindow()
+        self.rotator_window.setObjectName("rotator-window")
+        if os.environ.get("WAYLAND_DISPLAY") and old_Qt is True:
+            self.rotator_window.setFeatures(dockfeatures)
+        self.addDockWidget(Qt.DockWidgetArea.RightDockWidgetArea, self.rotator_window)
+        self.rotator_window.hide()
+        self.rotator_window.message.connect(self.dockwidget_message)
+        self.rotator_window.set_mygrid(self.station.get("GridSquare", ""))
+
         self.show_splash_msg("Setting up VFOWindow.")
         self.vfo_window = VfoWindow()
         self.vfo_window.setObjectName("vfo-window")
@@ -823,11 +839,18 @@ class MainWindow(QtWidgets.QMainWindow):
         if self.actionDXCC.isChecked():
             self.dxcc_window.show()
             self.dxcc_window.setActive(True)
-            # self.dxcc_window.get_run_and_total_qs()
         else:
             self.dxcc_window.hide()
             self.dxcc_window.setActive(False)
 
+        self.actionRotator.setChecked(self.pref.get("rotatorwindow", False))
+        if self.actionRotator.isChecked():
+            self.rotator_window.show()
+            self.rotator_window.setActive(True)
+        else:
+            self.rotator_window.hide()
+            self.rotator_window.setActive(False)
+
         self.actionVFO.setChecked(self.pref.get("vfowindow", False))
         if self.actionVFO.isChecked():
             self.vfo_window.show()
@@ -1236,7 +1259,9 @@ class MainWindow(QtWidgets.QMainWindow):
                         self.heading_distance.setText(
                             f"{grid} Hdg {heading}° LP {reciprocol(heading)}° / "
                             f"distance {int(kilometers*0.621371)}mi {kilometers}km"
+                            f" {msg.get('result', {}).get('name_fmt', '')}"
                         )
+                        self.rotator_window.set_requested_azimuth(float(heading))
 
     def cluster_expire_updated(self, number):
         """signal from bandmap"""
@@ -1631,6 +1656,8 @@ class MainWindow(QtWidgets.QMainWindow):
             self.station = self.database.fetch_station()
             if self.station is None:
                 self.station = {}
+            if self.rotator_window is not None:
+                self.rotator_window.set_mygrid(self.station.get("GridSquare", ""))
             self.current_op = self.station.get("Call", "")
             self.voice_process.current_op = self.current_op
             self.make_op_dir()
@@ -1673,6 +1700,8 @@ class MainWindow(QtWidgets.QMainWindow):
             self.station = self.database.fetch_station()
             if self.station is None:
                 self.station = {}
+            if self.rotator_window is not None:
+                self.rotator_window.set_mygrid(self.station.get("GridSquare", ""))
             if self.station.get("Call", "") == "":
                 self.edit_station_settings()
             self.current_op = self.station.get("Call", "")
@@ -2245,11 +2274,21 @@ class MainWindow(QtWidgets.QMainWindow):
         if self.actionDXCC.isChecked():
             self.dxcc_window.show()
             self.dxcc_window.setActive(True)
-            # self.dxcc_window.get_run_and_total_qs()
         else:
             self.dxcc_window.hide()
             self.dxcc_window.setActive(False)
 
+    def launch_rotator_window(self) -> None:
+        """Launch the rotator window"""
+        self.pref["rotatorwindow"] = self.actionRotator.isChecked()
+        self.write_preference()
+        if self.actionRotator.isChecked():
+            self.rotator_window.show()
+            self.rotator_window.setActive(True)
+        else:
+            self.rotator_window.hide()
+            self.rotator_window.setActive(False)
+
     def launch_vfo(self) -> None:
         """Launch the VFO window"""
         self.pref["vfowindow"] = self.actionVFO.isChecked()
@@ -3099,6 +3138,8 @@ class MainWindow(QtWidgets.QMainWindow):
         self.station["Club"] = self.settings_dialog.Club.text()
         self.station["Email"] = self.settings_dialog.Email.text()
         self.database.add_station(self.station)
+        if self.rotator_window is not None:
+            self.rotator_window.set_mygrid(self.settings_dialog.GridSquare.text())
         self.settings_dialog.close()
         if self.current_op == "":
             self.current_op = self.station.get("Call", "")
@@ -4060,6 +4101,8 @@ class MainWindow(QtWidgets.QMainWindow):
                 f"Regional Hdg {heading}° LP {reciprocol(heading)}° / "
                 f"distance {int(kilometers*0.621371)}mi {kilometers}km"
             )
+            if self.rotator_window is not None:
+                self.rotator_window.set_requested_azimuth(float(heading))
             self.contact["CountryPrefix"] = primary_pfx
             self.contact["ZN"] = int(cq)
             if self.contest:

{not1mm-25.6.10 → not1mm-25.6.11.1}/not1mm/data/main.ui

@@ -1573,6 +1573,7 @@
     <addaction name="actionStatistics"/>
     <addaction name="actionVFO"/>
     <addaction name="actionDXCC"/>
+    <addaction name="actionRotator"/>
    </widget>
    <widget class="QMenu" name="menuOther">
     <property name="title">
@@ -2144,6 +2145,17 @@
     <string>Alt+D</string>
    </property>
   </action>
+  <action name="actionRotator">
+   <property name="checkable">
+    <bool>true</bool>
+   </property>
+   <property name="text">
+    <string>Rotator</string>
+   </property>
+   <property name="shortcut">
+    <string>Alt+P</string>
+   </property>
+  </action>
  </widget>
  <resources/>
  <connections/>

not1mm-25.6.11.1/not1mm/data/rotator.ui

@@ -0,0 +1,144 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>RotatorWidget</class>
+ <widget class="QDockWidget" name="RotatorWidget">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>352</width>
+    <height>248</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>Rotator</string>
+  </property>
+  <widget class="QWidget" name="centralwidget">
+   <layout class="QVBoxLayout" name="verticalLayout">
+    <property name="leftMargin">
+     <number>0</number>
+    </property>
+    <property name="topMargin">
+     <number>0</number>
+    </property>
+    <property name="rightMargin">
+     <number>0</number>
+    </property>
+    <property name="bottomMargin">
+     <number>0</number>
+    </property>
+    <item>
+     <layout class="QHBoxLayout" name="horizontalLayout">
+      <item>
+       <widget class="QPushButton" name="move_button">
+        <property name="focusPolicy">
+         <enum>Qt::FocusPolicy::NoFocus</enum>
+        </property>
+        <property name="text">
+         <string>Move</string>
+        </property>
+       </widget>
+      </item>
+     </layout>
+    </item>
+    <item>
+     <widget class="QGraphicsView" name="compassView">
+      <property name="focusPolicy">
+       <enum>Qt::FocusPolicy::ClickFocus</enum>
+      </property>
+      <property name="frameShape">
+       <enum>QFrame::Shape::NoFrame</enum>
+      </property>
+      <property name="frameShadow">
+       <enum>QFrame::Shadow::Plain</enum>
+      </property>
+      <property name="renderHints">
+       <set>QPainter::RenderHint::Antialiasing|QPainter::RenderHint::SmoothPixmapTransform|QPainter::RenderHint::TextAntialiasing</set>
+      </property>
+     </widget>
+    </item>
+    <item>
+     <layout class="QHBoxLayout" name="horizontalLayout_2">
+      <item>
+       <spacer name="horizontalSpacer">
+        <property name="orientation">
+         <enum>Qt::Orientation::Horizontal</enum>
+        </property>
+        <property name="sizeHint" stdset="0">
+         <size>
+          <width>40</width>
+          <height>20</height>
+         </size>
+        </property>
+       </spacer>
+      </item>
+      <item>
+       <widget class="QPushButton" name="north_button">
+        <property name="focusPolicy">
+         <enum>Qt::FocusPolicy::NoFocus</enum>
+        </property>
+        <property name="text">
+         <string>N</string>
+        </property>
+        <property name="iconSize">
+         <size>
+          <width>16</width>
+          <height>16</height>
+         </size>
+        </property>
+        <property name="flat">
+         <bool>false</bool>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QPushButton" name="south_button">
+        <property name="focusPolicy">
+         <enum>Qt::FocusPolicy::NoFocus</enum>
+        </property>
+        <property name="text">
+         <string>S</string>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QPushButton" name="west_button">
+        <property name="focusPolicy">
+         <enum>Qt::FocusPolicy::NoFocus</enum>
+        </property>
+        <property name="text">
+         <string>W</string>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <widget class="QPushButton" name="east_button">
+        <property name="focusPolicy">
+         <enum>Qt::FocusPolicy::NoFocus</enum>
+        </property>
+        <property name="text">
+         <string>E</string>
+        </property>
+       </widget>
+      </item>
+      <item>
+       <spacer name="horizontalSpacer_2">
+        <property name="orientation">
+         <enum>Qt::Orientation::Horizontal</enum>
+        </property>
+        <property name="sizeHint" stdset="0">
+         <size>
+          <width>40</width>
+          <height>20</height>
+         </size>
+        </property>
+       </spacer>
+      </item>
+     </layout>
+    </item>
+   </layout>
+  </widget>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>

not1mm-25.6.11.1/not1mm/lib/rot_interface.py

@@ -0,0 +1,101 @@
+import socket
+import logging
+
+if __name__ == "__main__":
+    print("I'm not the program you are looking for.")
+
+logger = logging.getLogger("rot_interface")
+
+
+class RotatorInterface:
+    """
+    A class to interface with a rotator control program (like rotctld).
+    """
+
+    def __init__(self, host="127.0.0.1", port=4533):
+        self.host = host
+        self.port = port
+        self.socket = None
+        self.connected = False
+        self.connect()
+
+    def connect(self):
+        """Connect to the rotator control program."""
+        try:
+            self.socket = socket.create_connection((self.host, self.port), timeout=1)
+            self.connected = True
+            logger.info(f"Connected to rotator at {self.host}:{self.port}")
+        except (socket.timeout, ConnectionRefusedError, OSError) as e:
+            self.connected = False
+            logger.warning(
+                f"Failed to connect to rotator at {self.host}:{self.port}: {e}"
+            )
+            self.socket = None
+
+    def disconnect(self):
+        """Disconnect from the rotator control program."""
+        if self.socket:
+            try:
+                self.socket.close()
+                logger.info("Disconnected from rotator")
+            except OSError as e:
+                logger.warning(f"Error closing rotator socket: {e}")
+            self.socket = None
+            self.connected = False
+
+    def send_command(self, command):
+        """Send a command to the rotator control program and return the response."""
+        if not self.connected or not self.socket:
+            self.connect()
+            if not self.connected or not self.socket:
+                logger.warning("Not connected to rotator. Command not sent.")
+                return None
+
+        try:
+            self.socket.sendall((command + "\n").encode())
+            response = self.socket.recv(1024).decode().strip()
+            logger.debug(f"Sent: {command}, Received: {response}")
+            return response
+        except OSError as e:
+            logger.warning(f"Error sending command to rotator: {e}")
+            self.disconnect()
+            return None
+
+    def get_position(self):
+        """Get the current azimuth and elevation from the rotator."""
+        response = self.send_command("p")
+        logger.debug(f"get_position response: {response}")
+        if response:
+            if response == "RPRT -1":
+                return None, None
+            try:
+                azimuth, elevation = map(float, response.split("\n"))
+                return azimuth, elevation
+            except ValueError:
+                logger.warning(f"Invalid response from rotator: {response}")
+        return None, None
+
+    def set_position(self, azimuth, elevation=0.0) -> bool:
+        """Set the azimuth and elevation on the rotator."""
+        response = self.send_command(f"P {azimuth} {elevation}")
+        return response is not None
+
+    def park_rotator(self) -> bool:
+        """Park the rotator."""
+        response = self.send_command("K")
+        return response is not None
+
+    def reset_rotator(self) -> bool:
+        """Reset the rotator."""
+        response = self.send_command("R")
+        return response is not None
+
+    def move_rotator(self, direction, speed) -> bool:
+        """Move the rotator in the specified direction at the specified speed."""
+        response = self.send_command(f"M {direction} {speed}")
+        return response is not None
+
+    def stop_rotator(self) -> bool:
+        """Stop the rotator."""
+        response = self.send_command("S")
+        return response is not None

not1mm-25.6.11.1/not1mm/lib/version.py

@@ -0,0 +1,3 @@
+"""It's the version"""
+
+__version__ = "25.6.11.1"