not1mm 25.1.6__tar.gz → 25.1.23__tar.gz

{not1mm-25.1.6 → not1mm-25.1.23}/PKG-INFO

@@ -1,6 +1,6 @@
-Metadata-Version: 2.1
+Metadata-Version: 2.2
 Name: not1mm
-Version: 25.1.6
+Version: 25.1.23
 Summary: NOT1MM Logger
 Author-email: Michael Bridak <michael.bridak@gmail.com>
 Project-URL: Homepage, https://github.com/mbridak/not1mm
@@ -51,7 +51,6 @@ Requires-Dist: Levenshtein
     - [The What](#the-what)
     - [Target Environment](#target-environment)
     - [The Why](#the-why)
-    - [General logging](#general-logging)
   - [Current state](#current-state)
     - [Code maturity](#code-maturity)
     - [Data and RTTY](#data-and-rtty)
@@ -115,6 +114,7 @@ Requires-Dist: Levenshtein
       - [Editing a contact](#editing-a-contact)
     - [The Bandmap Window](#the-bandmap-window)
     - [The Check Window](#the-check-window)
+    - [The Rate Window](#the-rate-window)
     - [The Remote VFO Window](#the-remote-vfo-window)
   - [Cabrillo](#cabrillo)
   - [ADIF](#adif)
@@ -164,11 +164,6 @@ I'm a casual contester and could not find any contesting software for Linux that
 I wanted to use. There is [Tucnak](http://tucnak.nagano.cz/) which is very robust
 and mature. It just wasn't for me.
 
-### General logging
-
-In short... Don't. There are much better general purpose QSO logging programs.
-Try QLog or CQRLog.
-
 ## Current state
 
 ### Code maturity
@@ -240,6 +235,8 @@ generated, 'cause I'm lazy, list of those who've submitted PR's.
 
 ## Recent Changes (Polishing the Turd)
 
+- [25-1-23] Added a basic rate window. Changed DB to WAL mode.
+- [25-1-15] Fix bug in ADIF output where mode showed as CW-R and not CW.
 - [25-1-6] Altered RTTY RU UDP ADIF parse.
 - [25-1-1] Added ARRL RTTY RU.
 
@@ -247,7 +244,7 @@ See [CHANGELOG.md](CHANGELOG.md) for prior changes.
 
 ## Flatpak
 
-I've tried for a couple days to get not1mm to build as a flatpak. I've failed.
+I've tried for a couple days to get Not1MM to build as a flatpak. I've failed.
 It keeps failing at building numpy. If you happen to be a flatpak savant, please
 feel free to look at com.github.mbridak.not1mm.yaml and python3-modules.yaml and
 clue me into the black magic needed to get it to work.
@@ -256,7 +253,7 @@ clue me into the black magic needed to get it to work.
 
 ### Prerequisites
 
-not1mm requires:
+Not1MM requires:
 
 - Python 3.9+
 - PyQt6
@@ -268,7 +265,7 @@ You should install these through your distribution's package manager before cont
 ### Common installation recipes for Ubuntu and Fedora
 
 I've taken the time to install some common Linux distributions into a VM and
-noted the minimum steps needed to install not1mm.
+noted the minimum steps needed to install Not1MM.
 
 <details>
 
@@ -392,14 +389,14 @@ python3 -m pipx ensurepath
 
 #### Installing with pipx
 
-Then installing not1mm is as simple as:
+Then installing Not1MM is as simple as:
 
 ```bash
 # Install not1mm
 pipx install not1mm
 ```
 
-If you need to later update not1mm, you can do so with:
+If you need to later update Not1MM, you can do so with:
 
 ```bash
 # Update not1mm
@@ -422,7 +419,7 @@ source rebuild.sh
 ```
 
 from the root directory. This installs a build chain and a local editable copy
-of not1mm.
+of Not1MM.
 
 There's two ways to launch the program from the local editable copy.
 
@@ -625,14 +622,10 @@ On the Options TAB you can:
 
 ## Logging WSJT-X FT8/FT4/ETC and FLDIGI RTTY contacts
 
-not1mm listens for WSJT-X UDP traffic on the Multicast address 224.0.0.1:2237.
-No setup is needed to be done on not1mm's side. That's good because I'm lazy.
+Not1MM listens for WSJT-X UDP traffic on the Multicast address 224.0.0.1:2237.
+No setup is needed to be done on Not1MM's side. That's good because I'm lazy.
 
-~~not1mm polls for fldigi QSOs via it's XMLRPC interface. It does this in a rather stupid
-way. It just keeps asking what was the last QSO and compares it to the previous response.
-If it's different, it's new.~~
-
-not1mm watches for fldigi qso's by watching for UDP traffic from fldigi on 127.0.0.1:9876.
+Not1MM watches for fldigi qso's by watching for UDP traffic from fldigi on 127.0.0.1:9876.
 
 ![fldigi configuration dialog](https://github.com/mbridak/not1mm/blob/master/pic/fldigi_adif_udp.png?raw=true)
 
@@ -810,6 +803,14 @@ Clicking on any of these items will change the callsign field.
 
 ![Check Window](https://github.com/mbridak/not1mm/raw/master/pic/checkwindow.png)
 
+### The Rate Window
+
+`Window`>`Rate Window`
+
+This window contains QSO rates and counts.
+
+![Rate Window](https://github.com/mbridak/not1mm/raw/master/pic/rate_window.png)
+
 ### The Remote VFO Window
 
 You can control the VFO on a remote rig by following the directions listed in

{not1mm-25.1.6 → not1mm-25.1.23}/README.md

@@ -20,7 +20,6 @@
     - [The What](#the-what)
     - [Target Environment](#target-environment)
     - [The Why](#the-why)
-    - [General logging](#general-logging)
   - [Current state](#current-state)
     - [Code maturity](#code-maturity)
     - [Data and RTTY](#data-and-rtty)
@@ -84,6 +83,7 @@
       - [Editing a contact](#editing-a-contact)
     - [The Bandmap Window](#the-bandmap-window)
     - [The Check Window](#the-check-window)
+    - [The Rate Window](#the-rate-window)
     - [The Remote VFO Window](#the-remote-vfo-window)
   - [Cabrillo](#cabrillo)
   - [ADIF](#adif)
@@ -133,11 +133,6 @@ I'm a casual contester and could not find any contesting software for Linux that
 I wanted to use. There is [Tucnak](http://tucnak.nagano.cz/) which is very robust
 and mature. It just wasn't for me.
 
-### General logging
-
-In short... Don't. There are much better general purpose QSO logging programs.
-Try QLog or CQRLog.
-
 ## Current state
 
 ### Code maturity
@@ -209,6 +204,8 @@ generated, 'cause I'm lazy, list of those who've submitted PR's.
 
 ## Recent Changes (Polishing the Turd)
 
+- [25-1-23] Added a basic rate window. Changed DB to WAL mode.
+- [25-1-15] Fix bug in ADIF output where mode showed as CW-R and not CW.
 - [25-1-6] Altered RTTY RU UDP ADIF parse.
 - [25-1-1] Added ARRL RTTY RU.
 
@@ -216,7 +213,7 @@ See [CHANGELOG.md](CHANGELOG.md) for prior changes.
 
 ## Flatpak
 
-I've tried for a couple days to get not1mm to build as a flatpak. I've failed.
+I've tried for a couple days to get Not1MM to build as a flatpak. I've failed.
 It keeps failing at building numpy. If you happen to be a flatpak savant, please
 feel free to look at com.github.mbridak.not1mm.yaml and python3-modules.yaml and
 clue me into the black magic needed to get it to work.
@@ -225,7 +222,7 @@ clue me into the black magic needed to get it to work.
 
 ### Prerequisites
 
-not1mm requires:
+Not1MM requires:
 
 - Python 3.9+
 - PyQt6
@@ -237,7 +234,7 @@ You should install these through your distribution's package manager before cont
 ### Common installation recipes for Ubuntu and Fedora
 
 I've taken the time to install some common Linux distributions into a VM and
-noted the minimum steps needed to install not1mm.
+noted the minimum steps needed to install Not1MM.
 
 <details>
 
@@ -361,14 +358,14 @@ python3 -m pipx ensurepath
 
 #### Installing with pipx
 
-Then installing not1mm is as simple as:
+Then installing Not1MM is as simple as:
 
 ```bash
 # Install not1mm
 pipx install not1mm
 ```
 
-If you need to later update not1mm, you can do so with:
+If you need to later update Not1MM, you can do so with:
 
 ```bash
 # Update not1mm
@@ -391,7 +388,7 @@ source rebuild.sh
 ```
 
 from the root directory. This installs a build chain and a local editable copy
-of not1mm.
+of Not1MM.
 
 There's two ways to launch the program from the local editable copy.
 
@@ -594,14 +591,10 @@ On the Options TAB you can:
 
 ## Logging WSJT-X FT8/FT4/ETC and FLDIGI RTTY contacts
 
-not1mm listens for WSJT-X UDP traffic on the Multicast address 224.0.0.1:2237.
-No setup is needed to be done on not1mm's side. That's good because I'm lazy.
+Not1MM listens for WSJT-X UDP traffic on the Multicast address 224.0.0.1:2237.
+No setup is needed to be done on Not1MM's side. That's good because I'm lazy.
 
-~~not1mm polls for fldigi QSOs via it's XMLRPC interface. It does this in a rather stupid
-way. It just keeps asking what was the last QSO and compares it to the previous response.
-If it's different, it's new.~~
-
-not1mm watches for fldigi qso's by watching for UDP traffic from fldigi on 127.0.0.1:9876.
+Not1MM watches for fldigi qso's by watching for UDP traffic from fldigi on 127.0.0.1:9876.
 
 ![fldigi configuration dialog](https://github.com/mbridak/not1mm/blob/master/pic/fldigi_adif_udp.png?raw=true)
 
@@ -779,6 +772,14 @@ Clicking on any of these items will change the callsign field.
 
 ![Check Window](https://github.com/mbridak/not1mm/raw/master/pic/checkwindow.png)
 
+### The Rate Window
+
+`Window`>`Rate Window`
+
+This window contains QSO rates and counts.
+
+![Rate Window](https://github.com/mbridak/not1mm/raw/master/pic/rate_window.png)
+
 ### The Remote VFO Window
 
 You can control the VFO on a remote rig by following the directions listed in

{not1mm-25.1.6 → not1mm-25.1.23}/not1mm/__main__.py

@@ -73,6 +73,7 @@ from not1mm.logwindow import LogWindow
 from not1mm.checkwindow import CheckWindow
 from not1mm.bandmap import BandMapWindow
 from not1mm.vfo import VfoWindow
+from not1mm.ratewindow import RateWindow
 from not1mm.radio import Radio
 from not1mm.voice_keying import Voice
 from not1mm.lookupservice import LookupService
@@ -136,6 +137,7 @@ class MainWindow(QtWidgets.QMainWindow):
         "bandmapwindow": False,
         "checkwindow": False,
         "vfowindow": False,
+        "ratewindow": False,
         "darkmode": True,
     }
     appstarted = False
@@ -236,6 +238,7 @@ class MainWindow(QtWidgets.QMainWindow):
         self.actionLog_Window.triggered.connect(self.launch_log_window)
         self.actionBandmap.triggered.connect(self.launch_bandmap_window)
         self.actionCheck_Window.triggered.connect(self.launch_check_window)
+        self.actionRate_Window.triggered.connect(self.launch_rate_window)
         self.actionVFO.triggered.connect(self.launch_vfo)
         self.actionRecalculate_Mults.triggered.connect(self.recalculate_mults)
         self.actionLoad_Call_History_File.triggered.connect(self.load_call_history)
@@ -642,6 +645,15 @@ class MainWindow(QtWidgets.QMainWindow):
         self.check_window.hide()
         self.check_window.message.connect(self.dockwidget_message)
 
+        self.show_splash_msg("Setting up RateWindow.")
+        self.rate_window = RateWindow()
+        self.rate_window.setObjectName("rate-window")
+        if os.environ.get("WAYLAND_DISPLAY") and old_Qt is True:
+            self.rate_window.setFeatures(dockfeatures)
+        self.addDockWidget(Qt.DockWidgetArea.RightDockWidgetArea, self.rate_window)
+        self.rate_window.hide()
+        self.rate_window.message.connect(self.dockwidget_message)
+
         self.show_splash_msg("Setting up VFOWindow.")
         self.vfo_window = VfoWindow()
         self.vfo_window.setObjectName("vfo-window")
@@ -692,6 +704,15 @@ class MainWindow(QtWidgets.QMainWindow):
             self.check_window.hide()
             self.check_window.setActive(False)
 
+        self.actionRate_Window.setChecked(self.pref.get("ratewindow", False))
+        if self.actionRate_Window.isChecked():
+            print(f"===============ratewindow=============")
+            self.rate_window.show()
+            self.rate_window.setActive(True)
+        else:
+            self.rate_window.hide()
+            self.rate_window.setActive(False)
+
         self.actionVFO.setChecked(self.pref.get("vfowindow", False))
         if self.actionVFO.isChecked():
             self.vfo_window.show()
@@ -1841,6 +1862,17 @@ class MainWindow(QtWidgets.QMainWindow):
             self.check_window.hide()
             self.check_window.setActive(False)
 
+    def launch_rate_window(self) -> None:
+        """Launch the check window"""
+        self.pref["ratewindow"] = self.actionRate_Window.isChecked()
+        self.write_preference()
+        if self.actionRate_Window.isChecked():
+            self.rate_window.show()
+            self.rate_window.setActive(True)
+        else:
+            self.rate_window.hide()
+            self.rate_window.setActive(False)
+
     def launch_vfo(self) -> None:
         """Launch the VFO window"""
         self.pref["vfowindow"] = self.actionVFO.isChecked()

{not1mm-25.1.6 → not1mm-25.1.23}/not1mm/data/main.ui

@@ -1513,6 +1513,7 @@
     <addaction name="actionLog_Window"/>
     <addaction name="actionBandmap"/>
     <addaction name="actionCheck_Window"/>
+    <addaction name="actionRate_Window"/>
     <addaction name="actionVFO"/>
    </widget>
    <widget class="QMenu" name="menuOther">
@@ -1961,6 +1962,19 @@
     </font>
    </property>
   </action>
+  <action name="actionRate_Window">
+   <property name="checkable">
+    <bool>true</bool>
+   </property>
+   <property name="text">
+    <string>Rate Window</string>
+   </property>
+   <property name="font">
+    <font>
+     <family>JetBrains Mono ExtraLight</family>
+    </font>
+   </property>
+  </action>
   <action name="actionVFO">
    <property name="checkable">
     <bool>true</bool>