meshcore 2.3.6__tar.gz → 2.3.7__tar.gz

{meshcore-2.3.6 → meshcore-2.3.7}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: meshcore
-Version: 2.3.6
+Version: 2.3.7
 Summary: Base classes for communicating with meshcore companion radios
 Project-URL: Homepage, https://github.com/fdlamotte/meshcore_py
 Project-URL: Issues, https://github.com/fdlamotte/meshcore_py/issues

{meshcore-2.3.6 → meshcore-2.3.7}/pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "hatchling.build"
 
 [project]
 name = "meshcore"
-version = "2.3.6"
+version = "2.3.7"
 authors = [
   { name="Florent de Lamotte", email="florent@frizoncorrea.fr" },
   { name="Alex Wolden", email="awolden@gmail.com" },

{meshcore-2.3.6 → meshcore-2.3.7}/src/meshcore/ble_cx.py

@@ -51,6 +51,14 @@ class BLEConnection:
         self.pin = pin
         self.rx_char = None
         self._disconnect_callback = None
+        self._background_tasks: set[asyncio.Task] = set()
+
+    def _spawn_background(self, coro) -> asyncio.Task:
+        """Create a tracked background task (prevents GC of fire-and-forget tasks)."""
+        task = asyncio.create_task(coro)
+        self._background_tasks.add(task)
+        task.add_done_callback(self._background_tasks.discard)
+        return task
 
     async def connect(self):
         """
@@ -116,9 +124,12 @@ class BLEConnection:
                     await self.client.pair()
                     logger.info("BLE pairing successful")
                 except Exception as e:
-                    logger.warning(f"BLE pairing failed: {e}")
-                    # Don't fail the connection if pairing fails, as the device
-                    # might already be paired or not require pairing
+                    logger.error(f"BLE pairing failed: {e}")
+                    # A failed pairing leaves the transport in a half-usable
+                    # state — re-raise so the caller gets a clean failure
+                    # instead of a silently degraded connection.
+                    await self.client.disconnect()
+                    raise
                     
         except BleakDeviceNotFoundError:
             return None
@@ -154,8 +165,19 @@ class BLEConnection:
         self.client = self._user_provided_client
         self.device = self._user_provided_device
 
+        # Re-register disconnect callback on the reset client so subsequent
+        # disconnects after a reconnect cycle are still detected.
+        if self.client is not None and hasattr(self.client, 'set_disconnected_callback'):
+            try:
+                self.client.set_disconnected_callback(self.handle_disconnect)
+            except Exception:
+                # set_disconnected_callback may not be available on all bleak
+                # versions; the next connect() call will re-create the client
+                # with the callback anyway.
+                pass
+
         if self._disconnect_callback:
-            asyncio.create_task(self._disconnect_callback("ble_disconnect"))
+            self._spawn_background(self._disconnect_callback("ble_disconnect"))
 
     def set_disconnect_callback(self, callback):
         """Set callback to handle disconnections."""
@@ -166,16 +188,24 @@ class BLEConnection:
 
     def handle_rx(self, _: BleakGATTCharacteristic, data: bytearray):
         if self.reader is not None:
-            asyncio.create_task(self.reader.handle_rx(data))
+            self._spawn_background(self.reader.handle_rx(data))
 
     async def send(self, data):
         if not self.client:
             logger.error("Client is not connected")
+            if self._disconnect_callback:
+                await self._disconnect_callback("ble_transport_lost")
             return False
         if not self.rx_char:
             logger.error("RX characteristic not found")
             return False
-        await self.client.write_gatt_char(self.rx_char, bytes(data), response=True)
+        try:
+            await self.client.write_gatt_char(self.rx_char, bytes(data), response=True)
+        except Exception as exc:
+            logger.warning(f"BLE write failed: {exc}")
+            if self._disconnect_callback:
+                await self._disconnect_callback(f"ble_write_failed: {exc}")
+            return False
 
     async def disconnect(self):
         """Disconnect from the BLE device."""

{meshcore-2.3.6 → meshcore-2.3.7}/src/meshcore/commands/base.py

@@ -58,17 +58,32 @@ def _validate_destination(dst: DestinationType, prefix_length: int = 6) -> bytes
 
 
 class CommandHandlerBase:
-    DEFAULT_TIMEOUT = 5.0
+    """Base class for command handlers.
+
+    .. note::
+        The internal ``asyncio.Lock`` is created lazily on first access
+        so that it binds to the correct running event loop (required for
+        Python 3.9/3.10 compatibility).
+    """
+
+    DEFAULT_TIMEOUT = 15.0
 
     def __init__(self, default_timeout: Optional[float] = None):
         self._sender_func: Optional[Callable[[bytes], Coroutine[Any, Any, None]]] = None
         self._reader: Optional[MessageReader] = None
         self.dispatcher: Optional[EventDispatcher] = None
-        self._mesh_request_lock = asyncio.Lock()
+        self.__mesh_request_lock: Optional[asyncio.Lock] = None
         self.default_timeout = (
             default_timeout if default_timeout is not None else self.DEFAULT_TIMEOUT
         )
 
+    @property
+    def _mesh_request_lock(self) -> asyncio.Lock:
+        """Lazy-init lock so it binds to the running loop, not import-time."""
+        if self.__mesh_request_lock is None:
+            self.__mesh_request_lock = asyncio.Lock()
+        return self.__mesh_request_lock
+
     def set_connection(self, connection: Any) -> None:
         async def sender(data: bytes) -> None:
             await connection.send(data)
@@ -90,6 +105,14 @@ class CommandHandlerBase:
         expected_events: Optional[Union[EventType, List[EventType]]] = None,
         timeout: Optional[float] = None,
     ) -> Event:
+        """Wait for the first of *expected_events* to arrive.
+
+        Returns the first matched ``Event``.  When ``EventType.ERROR`` is
+        among the expected types, the caller **must** check
+        ``result.is_error()`` before accessing command-specific payload
+        keys — an ERROR payload is ``{"reason": "..."}`` and will
+        ``KeyError`` on any other key.
+        """
         try:
             # Convert single event to list if needed
             if not isinstance(expected_events, list):
@@ -129,9 +152,6 @@ class CommandHandlerBase:
             logger.debug(f"Command error: {e}")
             return Event(EventType.ERROR, {"error": str(e)})
 
-        return Event(EventType.ERROR, {})
-
-
     async def send(
         self,
         data: bytes,
@@ -151,7 +171,14 @@ class CommandHandlerBase:
             timeout: Timeout in seconds, or None to use default_timeout
 
         Returns:
-            Event: The full event object that was received in response to the command
+            Event: The full event object that was received in response to
+            the command.
+
+        Important:
+            When ``EventType.ERROR`` is included in *expected_events*, the
+            returned event may be an error response.  Callers **must**
+            check ``result.is_error()`` before accessing command-specific
+            payload keys to avoid ``KeyError``.
         """
         if not self.dispatcher:
             raise RuntimeError("Dispatcher not set, cannot send commands")
@@ -170,7 +197,7 @@ class CommandHandlerBase:
             futures: List[asyncio.Future] = []
             subscriptions = []
 
-            loop = asyncio.get_event_loop()
+            loop = asyncio.get_running_loop()
             for event_type in expected_events:
                 future = loop.create_future()
 
@@ -243,18 +270,31 @@ class CommandHandlerBase:
         logger.debug(f"Binary request to {dst_bytes.hex()}")
         data = b"\x32" + dst_bytes + request_type.value.to_bytes(1, "little", signed=False) + (data if data else b"")
 
-        result = await self.send(data, [EventType.MSG_SENT, EventType.ERROR])
-        
-        # Register the request with the reader if we have both reader and request_type
-        if (result.type == EventType.MSG_SENT and 
-            self._reader is not None and 
-            request_type is not None):
-            
-            exp_tag = result.payload["expected_ack"].hex()
-            # Use provided timeout or fallback to suggested timeout (with 5s default)
-            actual_timeout = timeout if timeout is not None and timeout > 0 else result.payload.get("suggested_timeout", 4000) / 800.0
+        # Pre-register a placeholder binary request before send() to close the race
+        # window where a BINARY_RESPONSE could arrive between send() returning and
+        # registration. The placeholder tag is patched to the real tag once MSG_SENT
+        # returns. If send() fails, the placeholder is cleaned up.
+        placeholder_tag = None
+        if self._reader is not None and request_type is not None:
+            placeholder_tag = f"_pending_{id(data)}"
+            actual_timeout = timeout if timeout is not None and timeout > 0 else self.default_timeout
             actual_timeout = min_timeout if actual_timeout < min_timeout else actual_timeout
-            self._reader.register_binary_request(pubkey_prefix.hex(), exp_tag, request_type, actual_timeout, context=context)
+            self._reader.register_binary_request(pubkey_prefix.hex(), placeholder_tag, request_type, actual_timeout, context=context)
+
+        result = await self.send(data, [EventType.MSG_SENT, EventType.ERROR])
+
+        # Patch the placeholder tag with the real tag from MSG_SENT, or clean up on failure
+        if placeholder_tag is not None and self._reader is not None:
+            # Remove the placeholder entry
+            self._reader.pending_binary_requests.pop(placeholder_tag, None)
+            if (result.type == EventType.MSG_SENT and
+                    request_type is not None):
+                exp_tag = result.payload["expected_ack"].hex()
+                # Use suggested_timeout from the result if available
+                actual_timeout = timeout if timeout is not None and timeout > 0 else result.payload.get("suggested_timeout", 4000) / 800.0
+                actual_timeout = min_timeout if actual_timeout < min_timeout else actual_timeout
+                # Register with the real tag
+                self._reader.register_binary_request(pubkey_prefix.hex(), exp_tag, request_type, actual_timeout, context=context)
 
         return result
 
@@ -266,6 +306,7 @@ class CommandHandlerBase:
         contact = self._get_contact_by_prefix(dst_bytes.hex()) # need a contact for return path
         if contact is None:
             logger.error("No contact found")
+            return Event(EventType.ERROR, {"reason": "contact_not_found"})
 
         zero_hop = False
         if contact["out_path_len"] == -1: 

{meshcore-2.3.6 → meshcore-2.3.7}/src/meshcore/commands/binary.py

@@ -73,10 +73,6 @@ class BinaryCommandHandler(CommandHandlerBase):
 
             return telem_event.payload["lpp"] if telem_event else None
 
-    async def req_mma(self, contact, timeout=0, min_timeout=0):
-        logger.error("*** please consider using req_mma_sync instead of req_mma") 
-        return await self.req_mma_sync(contact, start, end, timeout,min_timeout)
-
     async def req_mma_sync(self, contact, start, end, timeout=0,min_timeout=0):
         async with self._mesh_request_lock:
             req = (

{meshcore-2.3.6 → meshcore-2.3.7}/src/meshcore/commands/contact.py

@@ -43,13 +43,17 @@ class ContactCommands(CommandHandlerBase):
                     logger.debug("Timeout while getting contacts")
                     for future in pending: # cancel all futures
                         future.cancel()
-                    return None
+                    return Event(EventType.ERROR, {"reason": "timeout waiting for contacts"})
 
                 for future in done:
                     event = await future
-                    if event is None or event.type != EventType.NEXT_CONTACT:
-                        for future in pending:
-                            future.cancel()
+                    if event is None:
+                        for f in pending:
+                            f.cancel()
+                        return Event(EventType.ERROR, {"reason": "no event received during contacts retrieval"})
+                    if event.type != EventType.NEXT_CONTACT:
+                        for f in pending:
+                            f.cancel()
                         return event
 
                 futures = []
@@ -64,7 +68,7 @@ class ContactCommands(CommandHandlerBase):
     
         except asyncio.TimeoutError:
             logger.debug(f"Timeout receiving contacts")
-            return None
+            return Event(EventType.ERROR, {"reason": "asyncio timeout receiving contacts"})
         except Exception as e:
             logger.debug(f"Command error: {e}")
             return Event(EventType.ERROR, {"error": str(e)})
@@ -116,7 +120,9 @@ class ContactCommands(CommandHandlerBase):
                     path_hash_mode = int(path.split(":")[1])
                     path = path.split(":")[0].replace(":","")
                 else: # use device one by default
-                    path_hash_mode = contact["out_path_len"] >> 6 # would fallback to previous val
+                    # out_path_len is pre-masked (& 0x3F) in reader.py, so high bits are always 0;
+                    # the actual path_hash_mode is fetched from the device query below.
+                    path_hash_mode = 0
                     res = await self.send_device_query()
                     if not res is None and res.type != EventType.ERROR:
                         if "path_hash_mode" in res.payload:
@@ -185,6 +191,24 @@ class ContactCommands(CommandHandlerBase):
         data = b"\x3B"
         return await self.send(data, [EventType.AUTOADD_CONFIG, EventType.ERROR])
 
+    async def get_contact_by_key(self, pubkey: bytes) -> Event:
+        """N09: Retrieve a single contact by its public key (CMD 30).
+
+        Args:
+            pubkey: 32-byte public key of the contact.
+
+        Returns:
+            Event with the contact data (same format as CONTACT/NEXT_CONTACT),
+            or ERROR if not found.
+        """
+        if not isinstance(pubkey, (bytes, bytearray)):
+            raise TypeError("pubkey must be bytes-like")
+        # Truncate or pad to 32 bytes
+        key_bytes = bytes(pubkey[:32])
+        logger.debug(f"Getting contact by key: {key_bytes.hex()}")
+        data = b"\x1e" + key_bytes
+        return await self.send(data, [EventType.NEXT_CONTACT, EventType.ERROR])
+
     async def get_advert_path(self, key: DestinationType) -> Event:
         key_bytes = _validate_destination(key, prefix_length=32)
         logger.debug(f"getting advert path for: {key} {key_bytes.hex()}")

{meshcore-2.3.6 → meshcore-2.3.7}/src/meshcore/commands/device.py

@@ -4,6 +4,7 @@ from hashlib import sha256
 from typing import Optional
 
 from ..events import Event, EventType
+from ..packets import CommandType
 from .base import CommandHandlerBase, DestinationType, _validate_destination
 
 logger = logging.getLogger("meshcore")
@@ -13,7 +14,7 @@ class DeviceCommands(CommandHandlerBase):
     async def send_appstart(self) -> Event:
         logger.debug("Sending appstart command")
         b1 = bytearray(b"\x01\x03      mccli")
-        return await self.send(b1, [EventType.SELF_INFO])
+        return await self.send(b1, [EventType.SELF_INFO, EventType.ERROR])
 
     async def send_device_query(self) -> Event:
         logger.debug("Sending device query command")
@@ -129,32 +130,50 @@ class DeviceCommands(CommandHandlerBase):
         return await self.send(data, [EventType.OK, EventType.ERROR])
 
     async def set_telemetry_mode_base(self, telemetry_mode_base: int) -> Event:
-        infos = (await self.send_appstart()).payload
+        result = await self.send_appstart()
+        if result.is_error():
+            return result
+        infos = result.payload
         infos["telemetry_mode_base"] = telemetry_mode_base
         return await self.set_other_params_from_infos(infos)
 
     async def set_telemetry_mode_loc(self, telemetry_mode_loc: int) -> Event:
-        infos = (await self.send_appstart()).payload
+        result = await self.send_appstart()
+        if result.is_error():
+            return result
+        infos = result.payload
         infos["telemetry_mode_loc"] = telemetry_mode_loc
         return await self.set_other_params_from_infos(infos)
 
     async def set_telemetry_mode_env(self, telemetry_mode_env: int) -> Event:
-        infos = (await self.send_appstart()).payload
+        result = await self.send_appstart()
+        if result.is_error():
+            return result
+        infos = result.payload
         infos["telemetry_mode_env"] = telemetry_mode_env
         return await self.set_other_params_from_infos(infos)
 
     async def set_manual_add_contacts(self, manual_add_contacts: bool) -> Event:
-        infos = (await self.send_appstart()).payload
+        result = await self.send_appstart()
+        if result.is_error():
+            return result
+        infos = result.payload
         infos["manual_add_contacts"] = manual_add_contacts
         return await self.set_other_params_from_infos(infos)
 
     async def set_advert_loc_policy(self, advert_loc_policy: int) -> Event:
-        infos = (await self.send_appstart()).payload
+        result = await self.send_appstart()
+        if result.is_error():
+            return result
+        infos = result.payload
         infos["adv_loc_policy"] = advert_loc_policy
         return await self.set_other_params_from_infos(infos)
 
     async def set_multi_acks(self, multi_acks: int) -> Event:
-        infos = (await self.send_appstart()).payload
+        result = await self.send_appstart()
+        if result.is_error():
+            return result
+        infos = result.payload
         infos["multi_acks"] = multi_acks
         return await self.set_other_params_from_infos(infos)
 
@@ -273,20 +292,89 @@ class DeviceCommands(CommandHandlerBase):
 
         return await self.sign_finish(timeout=timeout, data_size=len(data))
 
+    async def has_connection(self) -> Event:
+        """N09: Check if the device has an active connection (CMD 28).
+
+        Returns:
+            Event with a 1-byte response indicating connection status,
+            or ERROR.
+        """
+        logger.debug("Checking device connection status")
+        return await self.send(b"\x1c", [EventType.OK, EventType.ERROR])
+
+    async def get_tuning(self) -> Event:
+        """N03/N09: Request current tuning parameters (CMD_GET_TUNING_PARAMS = 43).
+
+        Firmware responds with RESP_CODE_TUNING_PARAMS (23): 9 bytes containing
+        rx_delay (4 bytes LE) and airtime_factor (4 bytes LE).
+
+        Returns:
+            Event of type TUNING_PARAMS with rx_delay and airtime_factor,
+            or ERROR.
+        """
+        logger.debug("Getting tuning parameters")
+        return await self.send(b"\x2b", [EventType.TUNING_PARAMS, EventType.ERROR])
+
+    async def request_factory_reset(self) -> str:
+        """N09: Request a factory reset token (step 1 of 2).
+
+        This method returns a confirmation token string. Pass it to
+        ``confirm_factory_reset(token)`` to actually execute the reset.
+        The two-step pattern is a Python-side safety measure; the firmware
+        itself has no token verification.
+
+        Returns:
+            A confirmation token string to pass to confirm_factory_reset().
+        """
+        import secrets
+        token = secrets.token_hex(8)
+        logger.warning(
+            "Factory reset requested. Call confirm_factory_reset('%s') to proceed. "
+            "This will ERASE ALL DATA on the device.", token
+        )
+        # Store the token on the instance for validation
+        self._factory_reset_token = token
+        return token
+
+    async def confirm_factory_reset(self, token: str) -> Event:
+        """N09: Execute factory reset after token confirmation (step 2 of 2).
+
+        Args:
+            token: The token returned by request_factory_reset().
+
+        Returns:
+            Event with OK or ERROR.
+
+        Raises:
+            ValueError: If the token does not match.
+        """
+        expected = getattr(self, "_factory_reset_token", None)
+        if expected is None or token != expected:
+            raise ValueError(
+                "Invalid or expired factory reset token. "
+                "Call request_factory_reset() first."
+            )
+        self._factory_reset_token = None  # Consume the token
+        logger.warning("Executing factory reset — all device data will be erased")
+        return await self.send(b"\x33", [EventType.OK, EventType.ERROR])
+
     async def get_stats_core(self) -> Event:
         logger.debug("Getting core statistics")
-        # CMD_GET_STATS (56) + STATS_TYPE_CORE (0)
-        return await self.send(b"\x38\x00", [EventType.STATS_CORE, EventType.ERROR])
+        # R04: Use CommandType enum instead of literal bytes
+        cmd = bytes([CommandType.GET_STATS.value, 0x00])  # GET_STATS + STATS_TYPE_CORE
+        return await self.send(cmd, [EventType.STATS_CORE, EventType.ERROR])
 
     async def get_stats_radio(self) -> Event:
         logger.debug("Getting radio statistics")
-        # CMD_GET_STATS (56) + STATS_TYPE_RADIO (1)
-        return await self.send(b"\x38\x01", [EventType.STATS_RADIO, EventType.ERROR])
+        # R04: Use CommandType enum instead of literal bytes
+        cmd = bytes([CommandType.GET_STATS.value, 0x01])  # GET_STATS + STATS_TYPE_RADIO
+        return await self.send(cmd, [EventType.STATS_RADIO, EventType.ERROR])
 
     async def get_stats_packets(self) -> Event:
         logger.debug("Getting packet statistics")
-        # CMD_GET_STATS (56) + STATS_TYPE_PACKETS (2)
-        return await self.send(b"\x38\x02", [EventType.STATS_PACKETS, EventType.ERROR])
+        # R04: Use CommandType enum instead of literal bytes
+        cmd = bytes([CommandType.GET_STATS.value, 0x02])  # GET_STATS + STATS_TYPE_PACKETS
+        return await self.send(cmd, [EventType.STATS_PACKETS, EventType.ERROR])
 
     async def get_allowed_repeat_freq(self) -> Event:
         logger.debug("Getting allowed repeat freqs")

{meshcore-2.3.6 → meshcore-2.3.7}/src/meshcore/commands/messaging.py

@@ -144,8 +144,12 @@ class MessagingCommands(CommandHandlerBase):
                 logger.info(f"Retry sending msg: {attempts + 1}")
 
             result = await self.send_msg(dst, msg, timestamp, attempt=attempts)
-            if result.type == EventType.ERROR:
-                logger.error(f"⚠️ Failed to send message: {result.payload}")
+            if result.is_error():
+                logger.error(f"Failed to send message: {result.payload}")
+                attempts += 1
+                if flood:
+                    flood_attempts += 1
+                continue
 
             exp_ack = result.payload["expected_ack"].hex()
             timeout = result.payload["suggested_timeout"] / 1000 * 1.2 if timeout==0 else timeout
@@ -255,7 +259,7 @@ class MessagingCommands(CommandHandlerBase):
                 elif path_hash_len == 8 :
                     flags = 3
                 else :
-                    logger.error(f"Invalid path format: {e}")
+                    logger.error(f"Invalid path format: unknown path_hash_len {path_hash_len}")
                     return Event(EventType.ERROR, {"reason": "invalid_path_format"})
             else:
                 flags = 0
@@ -291,12 +295,34 @@ class MessagingCommands(CommandHandlerBase):
         cmd_data.append(flags)
         cmd_data.extend(path_bytes)
 
+        # N05: Firmware requires strict len > 10 (MyMesh.cpp:1620).
+        # When path is empty, cmd(1)+tag(4)+auth(4)+flags(1) = 10 bytes exactly,
+        # which is silently rejected. Pad with one zero byte to reach 11.
+        if len(cmd_data) <= 10:
+            cmd_data.append(0x00)
+
         logger.debug(
             f"Sending trace: tag={tag}, auth={auth_code}, flags={flags}, path={path_bytes.hex()}"
         )
 
         return await self.send(cmd_data, [EventType.MSG_SENT, EventType.ERROR])
 
+    async def send_raw_data(self, payload: bytes) -> Event:
+        """N09: Send raw data via CMD_SEND_RAW_DATA (25).
+
+        Sends an arbitrary payload through the mesh network.
+
+        Args:
+            payload: Raw bytes to send.
+
+        Returns:
+            Event with MSG_SENT or ERROR.
+        """
+        if not isinstance(payload, (bytes, bytearray)):
+            raise TypeError("payload must be bytes-like")
+        data = b"\x19" + bytes(payload)
+        return await self.send(data, [EventType.MSG_SENT, EventType.ERROR])
+
     async def set_flood_scope(self, scope):
         if scope is None:
             logger.debug(f"Resetting scope")
@@ -313,6 +339,8 @@ class MessagingCommands(CommandHandlerBase):
         elif isinstance (scope, bytes): # scope has been sent directly as byte
                 logger.debug(f"Directly setting scope to {scope}")
                 scope_key = scope
+        else:
+            raise TypeError(f"set_flood_scope: unsupported scope type {type(scope).__name__}")
 
         logger.debug(f"Setting scope to {scope_key.hex()}")
 
@@ -321,3 +349,36 @@ class MessagingCommands(CommandHandlerBase):
         cmd_data.extend(scope_key)
 
         return await self.send(cmd_data, [EventType.OK, EventType.ERROR])
+
+    async def set_default_flood_scope(self, scope):
+        if scope is None:
+            logger.debug(f"Resetting default scope")
+            scope_key = b"\0"*16
+            scope_name = ""
+        elif isinstance (scope, str):
+            if scope == "0" or scope == "None" or scope == "*" or scope == "": # disable
+                logger.debug ("Resetting default scope")
+                scope_key = b"\0"*16
+                scope_name = ""
+            else:
+                logger.debug (f"Setting scope to {scope}")
+                if scope[0] != "#":
+                    scope = "#" + scope
+                scope_name = scope
+                scope_key = sha256(scope.encode("utf-8")).digest()[0:16]
+        else:
+            raise TypeError(f"set_flood_scope: unsupported scope type {type(scope).__name__}")
+
+        logger.debug(f"Setting scope key to {scope_key.hex()}")
+
+        cmd_data = bytearray([CommandType.SET_DEFAULT_FLOOD_SCOPE.value])
+        cmd_data.extend(scope_name.encode("utf-8"))
+        cmd_data.extend((31-len(scope))*b'\0')
+        cmd_data.extend(scope_key)
+
+        return await self.send(cmd_data, [EventType.OK, EventType.ERROR])
+
+    async def get_default_flood_scope(self):
+        logger.debug(f"Getting default flood scope")
+        cmd_data = bytearray([CommandType.GET_DEFAULT_FLOOD_SCOPE.value])
+        return await self.send(cmd_data, [EventType.DEFAULT_FLOOD_SCOPE, EventType.ERROR])