memwal 0.2.2.dev4__tar.gz → 0.2.2.dev5__tar.gz

{memwal-0.2.2.dev4 → memwal-0.2.2.dev5}/CHANGELOG.md

@@ -23,8 +23,8 @@ Unreleased.
 
 ### Fixed
 
-- `with_memwal_*` gains `save_mode` and confirmable saves: `memwal_wait_for_saves` (async and sync) polls every job the middleware enqueued, and restores the job ids if that poll raises so a retry can still confirm them. (WALM-307, #410, #411, #412)
-- `wait_for_remember_jobs` chunks its status reads to the relayer's 20-id `MAX_BULK_ITEMS` cap. Above it the relayer answers a non-transient 400, so a wait over 21+ jobs raised on every attempt and could never confirm — reachable from `save_mode="remember"` after 21 turns, or from two fat `analyze` extracts. (WALM-307)
+- `with_memwal_*` gains `save_mode` and confirmable saves: `memwal_wait_for_saves` (async and sync) polls every job the middleware enqueued, and restores the job ids if that poll raises so a retry can still confirm them. (#410, #411, #412)
+- `wait_for_remember_jobs` chunks its status reads to the relayer's 20-id `MAX_BULK_ITEMS` cap. Above it the relayer answers a non-transient 400, so a wait over 21+ jobs raised on every attempt and could never confirm — reachable from `save_mode="remember"` after 21 turns, or from two fat `analyze` extracts.
 
 - Save confirmation preserves unconfirmed job IDs when an async wait is cancelled or a synchronous wait is interrupted, then propagates the cancellation or interrupt. (#1303)
 - Reject explicitly empty namespaces instead of silently writing to the default namespace. (#1265)
@@ -45,7 +45,7 @@ Unreleased.
 
 ### Added
 
-- `get_remember_status(job_id)` on `MemWal` and `MemWalSync` returns `RememberJobStatus` from `GET /api/remember/{job_id}`, accepting 200 and 404 like the TypeScript SDK. (WALM-832, #1096)
+- `get_remember_status(job_id)` on `MemWal` and `MemWalSync` returns `RememberJobStatus` from `GET /api/remember/{job_id}`, accepting 200 and 404 like the TypeScript SDK. (#1096)
 - `RecallMemory` and `RecallManualHit` include `created_at` and `score`. (#1178)
 - `RecallParams` accepts `scoring_weights` and `sort`. `recall()` forwards them on `POST /api/recall`. (#1062)
 
@@ -53,18 +53,18 @@ Unreleased.
 
 - The default `server_url` is `https://relayer.memory.walrus.xyz`, matching the TypeScript SDK. `env="local"` still selects `http://127.0.0.1:8000`. (#1064)
 - `remember` derives an idempotency key from the namespace and text inside a 30-minute bucket, matching the TypeScript SDK. A retry inside that window reuses the job. An explicit `idempotency_key` still wins. `remember_bulk_async` still sends no key. (#1094)
-- `get_remember_status` and `wait_for_remember_job` reject a job id outside `[A-Za-z0-9_-]+` before the request. `.`, `..`, a backslash, and encoded dot-dot used to pass a denylist and be rewritten after signing. An empty id used to call `GET /api/remember/` and raise `json.JSONDecodeError`. An unparseable 404 is `not_found` / `MemWalRememberJobNotFound`, not a JSON error. `uuid.UUID` is coerced with `str()`. Valid UUID job ids are unchanged. (WALM-833, #1100, #1216)
+- `get_remember_status` and `wait_for_remember_job` reject a job id outside `[A-Za-z0-9_-]+` before the request. `.`, `..`, a backslash, and encoded dot-dot used to pass a denylist and be rewritten after signing. An empty id used to call `GET /api/remember/` and raise `json.JSONDecodeError`. An unparseable 404 is `not_found` / `MemWalRememberJobNotFound`, not a JSON error. `uuid.UUID` is coerced with `str()`. Valid UUID job ids are unchanged. (#1100, #1216)
 - `remember`, `remember_bulk`, `analyze`, and `embed` reject whitespace-only text before the request. A blank body used to be accepted and then sit until the caller timed out. (#1129)
 - A 401 `AUTH_REJECTED` now says a wallet address is not a MemWal account ID. (#1132)
-- `wait_for_remember_jobs` / `remember_bulk_and_wait` no longer return a batch they could not read as if it were still uploading. When every status poll is rate-limited, the wait makes one confirming read and raises `MemWalRateLimited` (`status` 429, `job_ids`, `retry_after`) if that is refused too. An item still unsettled at the deadline names its last known status, or says no read got through. (WALM-671, #967)
-- A job the bulk status response omits stays pending and is asked about again. It used to drop out and settle as `timeout`. (WALM-660)
+- `wait_for_remember_jobs` / `remember_bulk_and_wait` no longer return a batch they could not read as if it were still uploading. When every status poll is rate-limited, the wait makes one confirming read and raises `MemWalRateLimited` (`status` 429, `job_ids`, `retry_after`) if that is refused too. An item still unsettled at the deadline names its last known status, or says no read got through. (#967)
+- A job the bulk status response omits stays pending and is asked about again. It used to drop out and settle as `timeout`.
 - `wait_for_remember_job` retries a transport error and stops at the caller's deadline. `Retry-After` may be a number of seconds or an HTTP date. (#1000, #1151)
-- `MemWalRememberJobTimeout` carries `last_status`, `server_error` and `last_refusal`, and its message names the relayer's last reported state. Under upload congestion a job stays `running` for up to ~25 minutes while the relayer retries, and the timeout used to hide that, so a job that was still retrying looked dead. (WALM-670, #966)
-- A `max_distance` filter keeps the relayer's matching `total` instead of replacing it with the number of rows left. (WALM-840)
+- `MemWalRememberJobTimeout` carries `last_status`, `server_error` and `last_refusal`, and its message names the relayer's last reported state. Under upload congestion a job stays `running` for up to ~25 minutes while the relayer retries, and the timeout used to hide that, so a job that was still retrying looked dead. (#966)
+- A `max_distance` filter keeps the relayer's matching `total` instead of replacing it with the number of rows left.
 - Middleware does not recall or auto-save on a tool-execution step. A later tool step reuses the cached recall. `flush()` raises when a background save failed, and `on_save_error` runs. The memory instruction is anchored at the start of the prompt. (#1107, #1117, #1159)
 - `normalize_private_key` accepts an uppercase `0X` prefix. Error text redacts IPv6, `0.0.0.0`, and `localhost` subdomains. (#1172, #1161)
-- Grow `wait_for_remember_job` / `wait_for_remember_jobs` poll delay 1.5× from the caller interval (floor 100ms) toward a 5s cap, with an immediate first poll. Backoff is disabled above the cap. (WALM-623)
-- A 429 during a remember-job wait is reported on the timeout. Retry-After is still clamped to the caller's remaining budget, and that remainder still buys one status read. (WALM-623)
+- Grow `wait_for_remember_job` / `wait_for_remember_jobs` poll delay 1.5× from the caller interval (floor 100ms) toward a 5s cap, with an immediate first poll. Backoff is disabled above the cap.
+- A 429 during a remember-job wait is reported on the timeout. Retry-After is still clamped to the caller's remaining budget, and that remainder still buys one status read.
 
 ## 0.1.11
 
@@ -84,7 +84,7 @@ Unreleased.
 
 - HTTP 503 with `x-auth-error: AUTH_UPSTREAM_UNAVAILABLE` is reported as a retryable credential-verification outage, not a sign-in failure. Other 503s keep the generic sanitized body.
 - `remember_bulk_async` rejects an empty `items` list before the request and raises when the relayer returns a `job_ids` length that does not match the batch.
-- restore `truncated` docs now match WALM-431 retryable semantics.
+- restore `truncated` docs now match the relayer’s retryable-incomplete semantics.
 - Warn when `server_url` uses plaintext `http://` against a non-localhost host, matching the TypeScript SDK `normalizeServerUrl` guard. Localhost, `127.0.0.1`, `::1`, and `*.localhost` are exempt; invalid URLs are left for the HTTP client to surface. The warning logs only scheme, host, and port so URL userinfo is not written to logs.
 
 ## 0.1.8

{memwal-0.2.2.dev4 → memwal-0.2.2.dev5}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.5
 Name: memwal
-Version: 0.2.2.dev4
+Version: 0.2.2.dev5
 Summary: Python SDK for Walrus Memory — Privacy-first AI memory with Ed25519 signing
 Project-URL: Homepage, https://memory.walrus.xyz
 Project-URL: Documentation, https://memory.walrus.xyz

{memwal-0.2.2.dev4 → memwal-0.2.2.dev5}/memwal/__init__.py

@@ -132,4 +132,4 @@ __all__ = [
     "RecallManualResult",
 ]
 
-__version__ = "0.2.2.dev4"
+__version__ = "0.2.2.dev5"

{memwal-0.2.2.dev4 → memwal-0.2.2.dev5}/pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "hatchling.build"
 
 [project]
 name = "memwal"
-version = "0.2.2.dev4"
+version = "0.2.2.dev5"
 description = "Python SDK for Walrus Memory — Privacy-first AI memory with Ed25519 signing"
 readme = "README.md"
 license = "MIT"