machinome-node-build123d 0.9.0__tar.gz

machinome_node_build123d-0.9.0/LICENSE

@@ -0,0 +1,21 @@
+Machinome - Source code for machines
+Copyright (C) 2023-2026 Luis Henrique Cassis Fagundes
+
+Machinome is free software, offered under two licences at your option:
+
+  * the GNU General Public License as published by the Free Software
+    Foundation, either version 2 of the License or any later version; or
+
+  * the CERN Open Hardware Licence Version 2 - Strongly Reciprocal
+    (CERN-OHL-S), version 2.0 or any later version published by CERN.
+
+SPDX-License-Identifier: GPL-2.0-or-later OR CERN-OHL-S-2.0+
+
+The full text of each licence is in the LICENSES directory:
+  LICENSES/GPL-2.0-or-later.txt
+  LICENSES/CERN-OHL-S-2.0.txt
+
+Source Location: https://github.com/machinome/machinome
+
+Machinome is distributed WITHOUT ANY WARRANTY; the licence you choose
+states the disclaimer that applies.

machinome_node_build123d-0.9.0/LICENSES/CERN-OHL-S-2.0.txt

@@ -0,0 +1,289 @@
+CERN Open Hardware Licence Version 2 - Strongly Reciprocal
+
+
+Preamble
+
+CERN has developed this licence to promote collaboration among
+hardware designers and to provide a legal tool which supports the
+freedom to use, study, modify, share and distribute hardware designs
+and products based on those designs. Version 2 of the CERN Open
+Hardware Licence comes in three variants: CERN-OHL-P (permissive); and
+two reciprocal licences: CERN-OHL-W (weakly reciprocal) and this
+licence, CERN-OHL-S (strongly reciprocal).
+
+The CERN-OHL-S is copyright CERN 2020. Anyone is welcome to use it, in
+unmodified form only.
+
+Use of this Licence does not imply any endorsement by CERN of any
+Licensor or their designs nor does it imply any involvement by CERN in
+their development.
+
+
+1 Definitions
+
+  1.1 'Licence' means this CERN-OHL-S.
+
+  1.2 'Compatible Licence' means
+
+       a) any earlier version of the CERN Open Hardware licence, or
+
+       b) any version of the CERN-OHL-S, or
+
+       c) any licence which permits You to treat the Source to which
+          it applies as licensed under CERN-OHL-S provided that on
+          Conveyance of any such Source, or any associated Product You
+          treat the Source in question as being licensed under
+          CERN-OHL-S.
+
+  1.3 'Source' means information such as design materials or digital
+      code which can be applied to Make or test a Product or to
+      prepare a Product for use, Conveyance or sale, regardless of its
+      medium or how it is expressed. It may include Notices.
+
+  1.4 'Covered Source' means Source that is explicitly made available
+      under this Licence.
+
+  1.5 'Product' means any device, component, work or physical object,
+      whether in finished or intermediate form, arising from the use,
+      application or processing of Covered Source.
+
+  1.6 'Make' means to create or configure something, whether by
+      manufacture, assembly, compiling, loading or applying Covered
+      Source or another Product or otherwise.
+
+  1.7 'Available Component' means any part, sub-assembly, library or
+      code which:
+
+       a) is licensed to You as Complete Source under a Compatible
+          Licence; or
+
+       b) is available, at the time a Product or the Source containing
+          it is first Conveyed, to You and any other prospective
+          licensees
+
+            i) as a physical part with sufficient rights and
+               information (including any configuration and
+               programming files and information about its
+               characteristics and interfaces) to enable it either to
+               be Made itself, or to be sourced and used to Make the
+               Product; or
+           ii) as part of the normal distribution of a tool used to
+               design or Make the Product.
+
+  1.8 'Complete Source' means the set of all Source necessary to Make
+      a Product, in the preferred form for making modifications,
+      including necessary installation and interfacing information
+      both for the Product, and for any included Available Components.
+      If the format is proprietary, it must also be made available in
+      a format (if the proprietary tool can create it) which is
+      viewable with a tool available to potential licensees and
+      licensed under a licence approved by the Free Software
+      Foundation or the Open Source Initiative. Complete Source need
+      not include the Source of any Available Component, provided that
+      You include in the Complete Source sufficient information to
+      enable a recipient to Make or source and use the Available
+      Component to Make the Product.
+
+  1.9 'Source Location' means a location where a Licensor has placed
+      Covered Source, and which that Licensor reasonably believes will
+      remain easily accessible for at least three years for anyone to
+      obtain a digital copy.
+
+ 1.10 'Notice' means copyright, acknowledgement and trademark notices,
+      Source Location references, modification notices (subsection
+      3.3(b)) and all notices that refer to this Licence and to the
+      disclaimer of warranties that are included in the Covered
+      Source.
+
+ 1.11 'Licensee' or 'You' means any person exercising rights under
+      this Licence.
+
+ 1.12 'Licensor' means a natural or legal person who creates or
+      modifies Covered Source. A person may be a Licensee and a
+      Licensor at the same time.
+
+ 1.13 'Convey' means to communicate to the public or distribute.
+
+
+2 Applicability
+
+  2.1 This Licence governs the use, copying, modification, Conveying
+      of Covered Source and Products, and the Making of Products. By
+      exercising any right granted under this Licence, You irrevocably
+      accept these terms and conditions.
+
+  2.2 This Licence is granted by the Licensor directly to You, and
+      shall apply worldwide and without limitation in time.
+
+  2.3 You shall not attempt to restrict by contract or otherwise the
+      rights granted under this Licence to other Licensees.
+
+  2.4 This Licence is not intended to restrict fair use, fair dealing,
+      or any other similar right.
+
+
+3 Copying, modifying and Conveying Covered Source
+
+  3.1 You may copy and Convey verbatim copies of Covered Source, in
+      any medium, provided You retain all Notices.
+
+  3.2 You may modify Covered Source, other than Notices, provided that
+      You irrevocably undertake to make that modified Covered Source
+      available from a Source Location should You Convey a Product in
+      circumstances where the recipient does not otherwise receive a
+      copy of the modified Covered Source. In each case subsection 3.3
+      shall apply.
+
+      You may only delete Notices if they are no longer applicable to
+      the corresponding Covered Source as modified by You and You may
+      add additional Notices applicable to Your modifications.
+      Including Covered Source in a larger work is modifying the
+      Covered Source, and the larger work becomes modified Covered
+      Source.
+
+  3.3 You may Convey modified Covered Source (with the effect that You
+      shall also become a Licensor) provided that You:
+
+       a) retain Notices as required in subsection 3.2;
+
+       b) add a Notice to the modified Covered Source stating that You
+          have modified it, with the date and brief description of how
+          You have modified it;
+
+       c) add a Source Location Notice for the modified Covered Source
+          if You Convey in circumstances where the recipient does not
+          otherwise receive a copy of the modified Covered Source; and
+
+       d) license the modified Covered Source under the terms and
+          conditions of this Licence (or, as set out in subsection
+          8.3, a later version, if permitted by the licence of the
+          original Covered Source). Such modified Covered Source must
+          be licensed as a whole, but excluding Available Components
+          contained in it, which remain licensed under their own
+          applicable licences.
+
+
+4 Making and Conveying Products
+
+You may Make Products, and/or Convey them, provided that You either
+provide each recipient with a copy of the Complete Source or ensure
+that each recipient is notified of the Source Location of the Complete
+Source. That Complete Source is Covered Source, and You must
+accordingly satisfy Your obligations set out in subsection 3.3. If
+specified in a Notice, the Product must visibly and securely display
+the Source Location on it or its packaging or documentation in the
+manner specified in that Notice.
+
+
+5 Research and Development
+
+You may Convey Covered Source, modified Covered Source or Products to
+a legal entity carrying out development, testing or quality assurance
+work on Your behalf provided that the work is performed on terms which
+prevent the entity from both using the Source or Products for its own
+internal purposes and Conveying the Source or Products or any
+modifications to them to any person other than You. Any modifications
+made by the entity shall be deemed to be made by You pursuant to
+subsection 3.2.
+
+
+6 DISCLAIMER AND LIABILITY
+
+  6.1 DISCLAIMER OF WARRANTY -- The Covered Source and any Products
+      are provided 'as is' and any express or implied warranties,
+      including, but not limited to, implied warranties of
+      merchantability, of satisfactory quality, non-infringement of
+      third party rights, and fitness for a particular purpose or use
+      are disclaimed in respect of any Source or Product to the
+      maximum extent permitted by law. The Licensor makes no
+      representation that any Source or Product does not or will not
+      infringe any patent, copyright, trade secret or other
+      proprietary right. The entire risk as to the use, quality, and
+      performance of any Source or Product shall be with You and not
+      the Licensor. This disclaimer of warranty is an essential part
+      of this Licence and a condition for the grant of any rights
+      granted under this Licence.
+
+  6.2 EXCLUSION AND LIMITATION OF LIABILITY -- The Licensor shall, to
+      the maximum extent permitted by law, have no liability for
+      direct, indirect, special, incidental, consequential, exemplary,
+      punitive or other damages of any character including, without
+      limitation, procurement of substitute goods or services, loss of
+      use, data or profits, or business interruption, however caused
+      and on any theory of contract, warranty, tort (including
+      negligence), product liability or otherwise, arising in any way
+      in relation to the Covered Source, modified Covered Source
+      and/or the Making or Conveyance of a Product, even if advised of
+      the possibility of such damages, and You shall hold the
+      Licensor(s) free and harmless from any liability, costs,
+      damages, fees and expenses, including claims by third parties,
+      in relation to such use.
+
+
+7 Patents
+
+  7.1 Subject to the terms and conditions of this Licence, each
+      Licensor hereby grants to You a perpetual, worldwide,
+      non-exclusive, no-charge, royalty-free, irrevocable (except as
+      stated in subsections 7.2 and 8.4) patent license to Make, have
+      Made, use, offer to sell, sell, import, and otherwise transfer
+      the Covered Source and Products, where such licence applies only
+      to those patent claims licensable by such Licensor that are
+      necessarily infringed by exercising rights under the Covered
+      Source as Conveyed by that Licensor.
+
+  7.2 If You institute patent litigation against any entity (including
+      a cross-claim or counterclaim in a lawsuit) alleging that the
+      Covered Source or a Product constitutes direct or contributory
+      patent infringement, or You seek any declaration that a patent
+      licensed to You under this Licence is invalid or unenforceable
+      then any rights granted to You under this Licence shall
+      terminate as of the date such process is initiated.
+
+
+8 General
+
+  8.1 If any provisions of this Licence are or subsequently become
+      invalid or unenforceable for any reason, the remaining
+      provisions shall remain effective.
+
+  8.2 You shall not use any of the name (including acronyms and
+      abbreviations), image, or logo by which the Licensor or CERN is
+      known, except where needed to comply with section 3, or where
+      the use is otherwise allowed by law. Any such permitted use
+      shall be factual and shall not be made so as to suggest any kind
+      of endorsement or implication of involvement by the Licensor or
+      its personnel.
+
+  8.3 CERN may publish updated versions and variants of this Licence
+      which it considers to be in the spirit of this version, but may
+      differ in detail to address new problems or concerns. New
+      versions will be published with a unique version number and a
+      variant identifier specifying the variant. If the Licensor has
+      specified that a given variant applies to the Covered Source
+      without specifying a version, You may treat that Covered Source
+      as being released under any version of the CERN-OHL with that
+      variant. If no variant is specified, the Covered Source shall be
+      treated as being released under CERN-OHL-S. The Licensor may
+      also specify that the Covered Source is subject to a specific
+      version of the CERN-OHL or any later version in which case You
+      may apply this or any later version of CERN-OHL with the same
+      variant identifier published by CERN.
+
+  8.4 This Licence shall terminate with immediate effect if You fail
+      to comply with any of its terms and conditions.
+
+  8.5 However, if You cease all breaches of this Licence, then Your
+      Licence from any Licensor is reinstated unless such Licensor has
+      terminated this Licence by giving You, while You remain in
+      breach, a notice specifying the breach and requiring You to cure
+      it within 30 days, and You have failed to come into compliance
+      in all material respects by the end of the 30 day period. Should
+      You repeat the breach after receipt of a cure notice and
+      subsequent reinstatement, this Licence will terminate
+      immediately and permanently. Section 6 shall continue to apply
+      after any termination.
+
+  8.6 This Licence shall not be enforceable except by a Licensor
+      acting as such, and third party beneficiary rights are
+      specifically excluded.

machinome_node_build123d-0.9.0/LICENSES/GPL-2.0-or-later.txt

@@ -0,0 +1,338 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+                            NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Moe Ghoul>, 1 April 1989
+  Moe Ghoul, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

machinome_node_build123d-0.9.0/PKG-INFO

@@ -0,0 +1,47 @@
+Metadata-Version: 2.4
+Name: machinome-node-build123d
+Version: 0.9.0
+Summary: The build123d node types of Machinome, and the reducer of its SVG artwork
+Author-email: Luis Fagundes <lhfagundes@gmail.com>
+License-Expression: GPL-2.0-or-later OR CERN-OHL-S-2.0+
+Project-URL: Homepage, https://github.com/machinome/machinome
+Keywords: machinome
+Classifier: Development Status :: 4 - Beta
+Classifier: Intended Audience :: Developers
+Classifier: Natural Language :: English
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Requires-Python: >=3.11
+Description-Content-Type: text/markdown
+License-File: LICENSE
+License-File: LICENSES/CERN-OHL-S-2.0.txt
+License-File: LICENSES/GPL-2.0-or-later.txt
+Requires-Dist: machinome~=0.9.0
+Requires-Dist: build123d==0.10.*
+Requires-Dist: ocp-gordon<0.3,>=0.2.2
+Requires-Dist: machinome-engine-brep~=0.9.0
+Requires-Dist: numpy
+Dynamic: license-file
+
+# machinome-node-build123d
+
+The build123d node types of [Machinome](https://github.com/machinome/machinome):
+the module `machinome.node.build123d`, whose `Build123dNode` is a part
+modelled with [build123d](https://build123d.readthedocs.io) and whose
+`Build123dSheetNode` is a sheet part cut from an authored profile, both
+B-rep geometry on the framework's B-rep engine. It also reduces the SVG
+artwork of a part's markings.
+
+## Install
+
+    pip install "machinome[build123d]"
+
+## Manual
+
+<https://machinome.readthedocs.io>
+
+## Licence
+
+GPL-2.0-or-later or CERN-OHL-S-2.0-or-later, at the recipient's choice; the
+texts are in `LICENSE` and `LICENSES/`.

machinome_node_build123d-0.9.0/README.md

@@ -0,0 +1,21 @@
+# machinome-node-build123d
+
+The build123d node types of [Machinome](https://github.com/machinome/machinome):
+the module `machinome.node.build123d`, whose `Build123dNode` is a part
+modelled with [build123d](https://build123d.readthedocs.io) and whose
+`Build123dSheetNode` is a sheet part cut from an authored profile, both
+B-rep geometry on the framework's B-rep engine. It also reduces the SVG
+artwork of a part's markings.
+
+## Install
+
+    pip install "machinome[build123d]"
+
+## Manual
+
+<https://machinome.readthedocs.io>
+
+## Licence
+
+GPL-2.0-or-later or CERN-OHL-S-2.0-or-later, at the recipient's choice; the
+texts are in `LICENSE` and `LICENSES/`.

machinome_node_build123d-0.9.0/machinome/node/build123d.py

@@ -0,0 +1,306 @@
+# Machinome - A framework for mechanical CAD projects
+# Copyright (C) 2023-2026 Luis Henrique Cassis Fagundes
+# SPDX-License-Identifier: GPL-2.0-or-later OR CERN-OHL-S-2.0+
+
+"""The build123d leaves: `Build123dNode`, `Build123dSheetNode`, and the
+reducer of `Svg` artwork.
+
+One module per technology (the `node-model` capability): both node types
+and the artwork reducer drive the one kernel, build123d, so they share one
+address, `machinome.node.build123d`, and one extra, `machinome[build123d]`.
+They stay distinct types -- a `Build123dNode` renders a solid it authored,
+a sheet part's solid is derived from its authored profile.
+
+build123d itself is imported inside the functions that use it, never at
+import: importing build123d costs about 2.4 seconds, which a project that
+names this module only to declare a node, or never builds an artwork,
+should not pay.
+"""
+
+import logging
+
+from machinome.engine import require_brep_engine
+from machinome.extras import require_extra
+from machinome.node.brep_leaf import BrepLeafNode
+from machinome.node.sheet_leaf import SheetLeafNode
+
+# Refused here, without the `build123d` extra, by the line that installs
+# it; the check imports nothing.
+require_extra('build123d',
+              'machinome.node.build123d (Build123dNode, Build123dSheetNode, '
+              'the Svg artwork reducer)',
+              'build123d')
+
+
+def build123d_shape(rendered):
+    """The kernel shape of a build123d render result, or None if
+    ``rendered`` did not come from build123d.
+
+    build123d is a front end over OCCT: every object of it wraps a single
+    TopoDS_Shape, exposed as ``.wrapped``, which is the B-rep engine's
+    currency itself (ADR-160). Taking that shape is therefore the whole
+    conversion, and every consumer after it -- placement, fuse, common,
+    BREP persistence, volume -- needs no backend special case, so a fusion
+    may freely mix build123d with any other B-rep backend.
+
+    build123d is recognised by module name rather than imported.
+    ``machinome.node`` imports no node type's module, each is imported
+    only when a project imports it, and importing build123d costs about 1.6
+    seconds, which a project modelling in another backend should not pay.
+
+    A builder is not itself geometry: ``with BuildPart() as part:`` is
+    build123d's headline idiom, and returning the builder rather than its
+    ``.part`` is the first mistake a user makes, so the finished part is
+    taken. Returning None rather than raising leaves the diagnosis to
+    Build123dNode.validate(), which can name the node.
+    """
+    if not type(rendered).__module__.startswith('build123d'):
+        return None
+    if not hasattr(rendered, 'wrapped'):
+        rendered = getattr(rendered, 'part', None)
+    return getattr(rendered, 'wrapped', None)
+
+
+class Build123dNode(BrepLeafNode):
+    """
+    Represents a 3D object created using the build123d tool.
+
+    build123d is a boundary-representation backend over the same OCCT that
+    CadQueryNode uses, so the B-rep leaf contract -- brep, shape(),
+    present() -- is BrepLeafNode's. What is build123d's own is the namespace
+    and the solid-shaped-result rule below.
+
+    Note that this module never imports build123d. See build123d_shape().
+    """
+
+    namespace = 'build123d'
+
+    def shape_from_rendered(self, rendered):
+        return build123d_shape(rendered)
+
+    def validate(self, rendered):
+        """Reject anything but a solid, on top of the inherited list and
+        namespace checks.
+
+        The namespace cannot carry this adapter alone. build123d's solids,
+        sketches and curves are all under the `build123d` namespace -- Part
+        and Compound in build123d.topology.composite, Solid in
+        build123d.topology.three_d, but also Rectangle in
+        build123d.objects_sketch and Line in build123d.objects_curve -- so
+        `namespace` admits a sketch as readily as a part. Left to itself, a
+        returned sketch would fail later and far less legibly, inside the STL
+        export.
+
+        The check stays here rather than on BrepLeafNode because it is not
+        the B-rep leaf contract's: a CadQuery render is legitimately a
+        Workplane, which is not a solid until shape_from_rendered unwraps
+        it. The solids are counted by the B-rep engine.
+        """
+        super().validate(rendered)
+
+        shape = build123d_shape(rendered)
+        if shape is None or not require_brep_engine(
+                f'B-rep leaf {self.name}',
+                'its render result is checked for a solid'
+                ).solid_count(shape):
+            raise Exception(
+                f"{self.name} is a Build123dNode and should render a "
+                f"build123d solid -- a Part, Solid or Compound, or a builder "
+                f"whose .part is one -- not {type(rendered).__name__}"
+            )
+
+
+# How far off the XY plane a profile may sit and still count as on it.
+# Loose enough for the rounding a placement composes, tight enough that a
+# profile authored on another plane is caught.
+_PLANE_TOLERANCE = 1e-6
+
+
+def _export_dxf(face, path):
+    """Write one validated planar face as a nominal cut file at `path`.
+
+    Nominal: the authored profile at model scale, in millimeters, with no
+    kerf or other machine compensation. Compensation is a property of a
+    machine and a material, not of the part, and the persisted BREP keeps
+    the exact profile available to a future offsetting exporter.
+
+    build123d's own DXF exporter is used rather than a tessellation, so a
+    circular hole reaches the cutter as a circle at its modelled radius
+    instead of a polygon that would cut tight.
+
+    Deliberately a private, single-purpose function rather than a method:
+    it converts a validated face to a file and knows nothing about nodes,
+    so a second sheet backend can be given its own without either growing
+    a backend switch (ADR-047's pattern). It writes bytes and nothing else:
+    the sheet base publishes the file, stamped and recorded, through
+    `publish_artifact` -- what is written is build123d's business, how it
+    is published the core's.
+    """
+    import build123d as b3d
+
+    exporter = b3d.ExportDXF(unit=b3d.Unit.MM)
+    exporter.add_shape(face)
+    exporter.write(path)
+
+
+class Build123dSheetNode(SheetLeafNode):
+    """A sheet part authored as a build123d profile.
+
+    The whole adapter is the backend-specific hooks SheetLeafNode declares
+    -- reduce a profile result to its planar faces, say whether a face lies
+    on the XY plane, extrude it, write it as a cut file. The contract around
+    them is the sheet base's, and the B-rep leaf contract under that is
+    BrepLeafNode's: the
+    extrusion is an ordinary build123d Part, so namespace validation,
+    the rewrap to the engine's currency, and the STL/BREP writes are the
+    ones every other B-rep adapter already goes through.
+
+    This is not a Build123dNode, though both are defined in this module.
+    Both drive build123d, but a Build123dNode renders a solid it authored,
+    while a sheet part's solid is derived and only its profile is
+    authored -- and the two must stay distinct types, since `isinstance`
+    distinguishes them that way.
+
+    Like Build123dNode, it imports build123d only inside the hooks that use
+    it, never at import time.
+    """
+
+    namespace = 'build123d'
+
+    def profile(self):
+        """The part's cut profile: a build123d `Sketch`, a `Face`, or a
+        `BuildSketch` builder holding one."""
+        raise NotImplementedError(
+            f"{self.__class__} is a Build123dSheetNode and must implement "
+            "profile(), returning a build123d sketch, face or BuildSketch")
+
+    def profile_faces(self, profile):
+        """The planar faces of a build123d profile result.
+
+        Empty for anything that is not a planar 2D object, so the sheet
+        base can name the type the node produced: a solid has solids, a
+        curve has no faces at all, and a foreign object is not build123d's.
+        A solid is the interesting rejection -- Build123dNode would accept
+        it, and its six planar faces would otherwise read as six parts.
+
+        A builder is not itself geometry. `with BuildSketch() as sketch:`
+        is build123d's headline sketch idiom, so the finished `.sketch` is
+        taken, exactly as Build123dNode takes a builder's `.part`.
+        """
+        if not type(profile).__module__.startswith('build123d'):
+            return []
+        if not hasattr(profile, 'wrapped'):
+            profile = getattr(profile, 'sketch', None)
+        if getattr(profile, 'wrapped', None) is None:
+            return []
+        if profile.solids() or profile.shells():
+            return []
+        return [face for face in profile.faces() if face.is_planar]
+
+    def lies_on_xy_plane(self, face):
+        normal = face.normal_at()
+        if abs(abs(normal.Z) - 1) > _PLANE_TOLERANCE:
+            return False
+        box = face.bounding_box()
+        return (abs(box.min.Z) <= _PLANE_TOLERANCE
+                and abs(box.max.Z) <= _PLANE_TOLERANCE)
+
+    def extrude(self, face):
+        """The profile swept along +Z by the thickness.
+
+        The direction is given explicitly rather than left to the face's
+        own normal, so a profile authored with a reversed normal still
+        yields the part the contract promises: from the XY plane up to
+        Z = thickness.
+        """
+        import build123d as b3d
+
+        return b3d.extrude(face, amount=self.thickness, dir=(0, 0, 1))
+
+    def write_dxf(self, face, path):
+        _export_dxf(face, path)
+
+
+##############################################
+# The reducer of `Svg` artwork
+
+#: The artwork reducer contract version this module implements. The markings
+#: module (`machinome.node.markings`) declares the version it speaks and
+#: refuses this module when the two differ (ADR-162's pattern).
+SVG_REDUCER_CONTRACT = 1
+
+#: The reduction's one log line keeps the logger it was written under, so a
+#: build's log reads as it did before the reducer moved here.
+logger = logging.getLogger('node.markings')
+
+
+def svg_regions(path) -> list:
+    """The drawing's CLOSED regions, each one build123d face carrying its
+    enclosed regions as holes.
+
+    The file's own origin is kept (`align=None`) rather than moved to the
+    drawing's minimum corner, which is what makes a marking's `origin=`
+    meaningful and what makes two artworks authored on one sheet register
+    with each other. Its Y axis is flipped into model orientation
+    (`flip_y=True`, build123d's default), because SVG's Y grows downward and
+    the model's does not -- so a drawing authored in a drawing program reads
+    the right way up and its faces sit at negative Y.
+
+    Open paths are ignored and COUNTED, in one line at INFO naming the file:
+    a drawing's sheet border is an open path that registers the artwork and
+    is not part of it -- the Curta's own `results_dial.svg` carries a border
+    that measures its roll's unwrapped circumference exactly -- and dropping
+    it silently would leave a modeller wondering why the digits do not sit
+    where the drawing says. Artwork with no closed region at all is refused:
+    a decal with nothing in it is a mistake, not an empty decal.
+    """
+    import build123d as b3d
+
+    shapes = b3d.import_svg(path, align=None)
+    faces = [shape for shape in shapes if isinstance(shape, b3d.Face)]
+    ignored = len(shapes) - len(faces)
+    logger.info('%s: %d open path(s) ignored, %d closed region(s) read',
+                path, ignored, len(faces))
+    if not faces:
+        raise ValueError(
+            f'{path} holds no closed region: a marking is the drawing\'s '
+            f'closed regions, and this file has none -- every path in it '
+            f'is open. Close the outlines the marking is meant to carry.')
+    return faces
+
+
+def svg_triangles(path, tolerance):
+    """The artwork at `path` as flat triangles, unscaled: `(vertices,
+    triangles)`, the vertices an `(N, 2)` array of artwork coordinates and
+    the triangles an `(M, 3)` array of indices into them.
+
+    Each region is oriented to `+Z` before it is meshed, so the triangles'
+    winding is a property of THIS PRODUCER and not of the drawing tool or of
+    a transitive dependency's fix-up pass: the markings' placement maths
+    maps artwork `+Z` outward by construction -- `Flat` builds its frame so
+    `x_axis x y_axis` is the declared normal, and `Wrapped` maps artwork
+    `(u, v)` so its tangents' cross product is the outward radial direction
+    -- so orienting the artwork here is what makes the built decal face away
+    from the part, whichever way the artwork's own regions came out of the
+    drawing.
+
+    Each region is then meshed in its own plane through OCCT's incremental
+    mesher, which respects the holes the face carries, so a digit's counter
+    is a hole in the decal and not a second patch of colour over it. The
+    artwork's `scale` is the file's property and is the caller's to apply.
+    """
+    import build123d as b3d
+    import numpy as np
+
+    vertices = []
+    triangles = []
+    for face in svg_regions(path):
+        if face.normal_at().Z < 0:
+            face = b3d.Face(face.wrapped.Complemented())
+        points, facets = face.tessellate(tolerance)
+        offset = len(vertices)
+        vertices.extend((point.X, point.Y) for point in points)
+        triangles.extend((a + offset, b + offset, c + offset)
+                         for a, b, c in facets)
+    return (np.array(vertices, dtype=float),
+            np.array(triangles, dtype=np.int64))

machinome_node_build123d-0.9.0/machinome_node_build123d.egg-info/PKG-INFO

@@ -0,0 +1,47 @@
+Metadata-Version: 2.4
+Name: machinome-node-build123d
+Version: 0.9.0
+Summary: The build123d node types of Machinome, and the reducer of its SVG artwork
+Author-email: Luis Fagundes <lhfagundes@gmail.com>
+License-Expression: GPL-2.0-or-later OR CERN-OHL-S-2.0+
+Project-URL: Homepage, https://github.com/machinome/machinome
+Keywords: machinome
+Classifier: Development Status :: 4 - Beta
+Classifier: Intended Audience :: Developers
+Classifier: Natural Language :: English
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Requires-Python: >=3.11
+Description-Content-Type: text/markdown
+License-File: LICENSE
+License-File: LICENSES/CERN-OHL-S-2.0.txt
+License-File: LICENSES/GPL-2.0-or-later.txt
+Requires-Dist: machinome~=0.9.0
+Requires-Dist: build123d==0.10.*
+Requires-Dist: ocp-gordon<0.3,>=0.2.2
+Requires-Dist: machinome-engine-brep~=0.9.0
+Requires-Dist: numpy
+Dynamic: license-file
+
+# machinome-node-build123d
+
+The build123d node types of [Machinome](https://github.com/machinome/machinome):
+the module `machinome.node.build123d`, whose `Build123dNode` is a part
+modelled with [build123d](https://build123d.readthedocs.io) and whose
+`Build123dSheetNode` is a sheet part cut from an authored profile, both
+B-rep geometry on the framework's B-rep engine. It also reduces the SVG
+artwork of a part's markings.
+
+## Install
+
+    pip install "machinome[build123d]"
+
+## Manual
+
+<https://machinome.readthedocs.io>
+
+## Licence
+
+GPL-2.0-or-later or CERN-OHL-S-2.0-or-later, at the recipient's choice; the
+texts are in `LICENSE` and `LICENSES/`.

machinome_node_build123d-0.9.0/machinome_node_build123d.egg-info/SOURCES.txt

@@ -0,0 +1,11 @@
+LICENSE
+README.md
+pyproject.toml
+LICENSES/CERN-OHL-S-2.0.txt
+LICENSES/GPL-2.0-or-later.txt
+machinome/node/build123d.py
+machinome_node_build123d.egg-info/PKG-INFO
+machinome_node_build123d.egg-info/SOURCES.txt
+machinome_node_build123d.egg-info/dependency_links.txt
+machinome_node_build123d.egg-info/requires.txt
+machinome_node_build123d.egg-info/top_level.txt

machinome_node_build123d-0.9.0/machinome_node_build123d.egg-info/dependency_links.txt

@@ -0,0 +1 @@
+

machinome_node_build123d-0.9.0/machinome_node_build123d.egg-info/requires.txt

@@ -0,0 +1,5 @@
+machinome~=0.9.0
+build123d==0.10.*
+ocp-gordon<0.3,>=0.2.2
+machinome-engine-brep~=0.9.0
+numpy

machinome_node_build123d-0.9.0/machinome_node_build123d.egg-info/top_level.txt

@@ -0,0 +1 @@
+machinome

machinome_node_build123d-0.9.0/pyproject.toml

@@ -0,0 +1,50 @@
+[build-system]
+requires = ["setuptools>=77"]
+build-backend = "setuptools.build_meta"
+
+[project]
+name = "machinome-node-build123d"
+version = "0.9.0"
+description = "The build123d node types of Machinome, and the reducer of its SVG artwork"
+readme = { file = "README.md", content-type = "text/markdown" }
+requires-python = ">=3.11"
+license = "GPL-2.0-or-later OR CERN-OHL-S-2.0+"
+license-files = ["LICENSE", "LICENSES/*.txt"]
+authors = [
+    { name = "Luis Fagundes", email = "lhfagundes@gmail.com" },
+]
+classifiers = [
+    "Development Status :: 4 - Beta",
+    "Intended Audience :: Developers",
+    "Natural Language :: English",
+    "Programming Language :: Python :: 3",
+    "Programming Language :: Python :: 3.11",
+    "Programming Language :: Python :: 3.12",
+]
+keywords = ["machinome"]
+dependencies = [
+    # The core this node type is a portion of, released with it: the set
+    # carries one version, and the pins between its packages are ~= both
+    # ways.
+    "machinome~=0.9.0",
+    # The newest build123d whose OCP is the one cadquery 2.7 binds
+    # (machinome-node-cadquery's manifest says why the pair).
+    "build123d==0.10.*",
+    # build123d 0.10 leaves this transitive dependency unbounded; 0.3
+    # imports OCP 8 collections absent from our shared OCP 7.8 runtime.
+    "ocp-gordon>=0.2.2,<0.3",
+    # The B-rep engine, which turns a render result into B-rep geometry and
+    # states the OCCT range, once.
+    "machinome-engine-brep~=0.9.0",
+    # Arrays, imported by the artwork reducer; the core pins the range.
+    "numpy",
+]
+
+[project.urls]
+Homepage = "https://github.com/machinome/machinome"
+
+[tool.setuptools.packages.find]
+# The portion, machinome/node/build123d.py, with no __init__.py at either
+# level, so the core's package path admits it.
+include = ["machinome.node"]
+namespaces = true

machinome_node_build123d-0.9.0/setup.cfg

@@ -0,0 +1,4 @@
+[egg_info]
+tag_build = 
+tag_date = 0
+