libcaes-python 20240114__tar.gz → 20251121__tar.gz

{libcaes-20240114 → libcaes-20251121}/AUTHORS

@@ -1,6 +1,6 @@
 Acknowledgements: libcaes
 
-Copyright (C) 2011-2024, Joachim Metz <joachim.metz@gmail.com>
+Copyright (C) 2011-2025, Joachim Metz <joachim.metz@gmail.com>
 
 Additional credits go to:
 * Omar Choudary <choudary.omar@gmail.com> for providing initial

libcaes-20251121/INSTALL

@@ -0,0 +1,380 @@
+Installation Instructions
+*************************
+
+Basic Installation
+==================
+
+   The following shell commands:
+
+     test -f configure || ./bootstrap
+     ./configure
+     make
+     make install
+
+should configure, build, and install this package.  The first line,
+which bootstraps, is intended for developers; when building from
+distribution tarballs it does nothing and can be skipped.  A package
+might name the bootstrapping script differently; if the name is
+‘autogen.sh’, for example, the first line should say ‘./autogen.sh’
+instead of ‘./bootstrap’.
+
+   The following more-detailed instructions are generic; see the
+‘README’ file for instructions specific to this package.  Some packages
+provide this ‘INSTALL’ file but do not implement all of the features
+documented below.  The lack of an optional feature in a given package is
+not necessarily a bug.  More recommendations for GNU packages can be
+found in the GNU Coding Standards.
+
+   Many packages have scripts meant for developers instead of ordinary
+builders, as they may use developer tools that are less commonly
+installed, or they may access the network, which has privacy
+implications.  These scripts attempt to bootstrap by building the
+‘configure’ script and related files, possibly using developer tools or
+the network.  Because the output of bootstrapping is system-independent,
+it is normally run by a package developer so that its output can be put
+into the distribution tarball and ordinary builders and users need not
+bootstrap.  Some packages have commands like ‘./autopull.sh’ and
+‘./autogen.sh’ that you can run instead of ‘./bootstrap’, for more
+fine-grained control over bootstrapping.
+
+   The ‘configure’ script attempts to guess correct values for various
+system-dependent variables used during compilation.  It uses those
+values to create a ‘Makefile’ in each directory of the package.  It may
+also create one or more ‘.h’ files containing system-dependent
+definitions.  Finally, it creates a script ‘config.status’ that you can
+run in the future to recreate the current configuration, and a file
+‘config.log’ containing output useful for debugging ‘configure’.
+
+   It can also use an optional file (typically called ‘config.cache’ and
+enabled with ‘--cache-file=config.cache’ or simply ‘-C’) that saves the
+results of its tests to speed up reconfiguring.  Caching is disabled by
+default to prevent problems with accidental use of stale cache files.
+
+   If you need to do unusual things to compile the package, please try
+to figure out how ‘configure’ could check whether to do them, and mail
+diffs or instructions to the address given in the ‘README’ so they can
+be considered for the next release.  If you are using the cache, and at
+some point ‘config.cache’ contains results you don’t want to keep, you
+may remove or edit it.
+
+   The ‘autoconf’ program generates ‘configure’ from the file
+‘configure.ac’.  Normally you should edit ‘configure.ac’ instead of
+editing ‘configure’ directly.
+
+   The simplest way to compile this package is:
+
+  1. ‘cd’ to the directory containing the package’s source code.
+
+  2. If this is a developer checkout and file ‘configure’ does not yet
+     exist, run the bootstrapping script (typically ‘./bootstrap’ or
+     ‘./autogen.sh’) to bootstrap and create the file.  You may need
+     special developer tools and network access to bootstrap, and the
+     network access may have privacy implications.
+
+  3. Type ‘./configure’ to configure the package for your system.  This
+     might take a while.  While running, ‘configure’ prints messages
+     telling which features it is checking for.
+
+  4. Type ‘make’ to compile the package.
+
+  5. Optionally, type ‘make check’ to run any self-tests that come with
+     the package, generally using the just-built uninstalled binaries.
+
+  6. Type ‘make install’ to install the programs and any data files and
+     documentation.  When installing into a prefix owned by root, it is
+     recommended that the package be configured and built as a regular
+     user, and only the ‘make install’ phase executed with root
+     privileges.
+
+  7. Optionally, type ‘make installcheck’ to repeat any self-tests, but
+     this time using the binaries in their final installed location.
+     This target does not install anything.  Running this target as a
+     regular user, particularly if the prior ‘make install’ required
+     root privileges, verifies that the installation completed
+     correctly.
+
+  8. You can remove the program binaries and object files from the
+     source code directory by typing ‘make clean’.  To also remove the
+     files that ‘configure’ created (so you can compile the package for
+     a different kind of computer), type ‘make distclean’.  There is
+     also a ‘make maintainer-clean’ target, but that is intended mainly
+     for the package’s developers.  If you use it, you may have to
+     bootstrap again.
+
+  9. If the package follows the GNU Coding Standards, you can type ‘make
+     uninstall’ to remove the installed files.
+
+Installation Prerequisites
+==========================
+
+   Installation requires a POSIX-like environment with a shell and at
+least the following standard utilities:
+
+     awk cat cp diff echo expr false ls mkdir mv printf pwd rm rmdir sed
+     sort test tr
+
+This package’s installation may need other standard utilities such as
+‘grep’, ‘make’, ‘sleep’ and ‘touch’, along with compilers like ‘gcc’.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the ‘configure’ script does not know about.  Run ‘./configure --help’
+for details on some of the pertinent environment variables.
+
+   You can give ‘configure’ initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here is
+an example:
+
+     ./configure CC=gcc CFLAGS=-g LIBS=-lposix
+
+   See “Defining Variables” for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each system in their own
+directory.  To do this, you can use GNU ‘make’.  ‘cd’ to the directory
+where you want the object files and executables to go and run the
+‘configure’ script.  ‘configure’ automatically checks for the source
+code in the directory that ‘configure’ is in and in ‘..’.  This is known
+as a “VPATH” build.
+
+   With a non-GNU ‘make’, it is safer to compile the package for one
+system at a time in the source code directory.  After you have installed
+the package for one system, use ‘make distclean’ before reconfiguring
+for another system.
+
+   Some platforms, notably macOS, support “fat” or “universal” binaries,
+where a single binary can execute on different architectures.  On these
+platforms you can configure and compile just once, with options specific
+to that platform.
+
+Installation Names
+==================
+
+   By default, ‘make install’ installs the package’s commands under
+‘/usr/local/bin’, include files under ‘/usr/local/include’, etc.  You
+can specify an installation prefix other than ‘/usr/local’ by giving
+‘configure’ the option ‘--prefix=PREFIX’, where PREFIX must be an
+absolute file name.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option ‘--exec-prefix=PREFIX’ to ‘configure’, the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like ‘--bindir=DIR’ to specify different values for particular
+kinds of files.  Run ‘configure --help’ for a list of the directories
+you can set and what kinds of files go in them.  In general, the default
+for these options is expressed in terms of ‘${prefix}’, so that
+specifying just ‘--prefix’ will affect all of the other directory
+specifications that were not explicitly provided.
+
+   The most portable way to affect installation locations is to pass the
+correct locations to ‘configure’; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+‘make install’ command line to change installation locations without
+having to reconfigure or recompile.
+
+   The first method involves providing an override variable for each
+affected directory.  For example, ‘make install
+prefix=/alternate/directory’ will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+‘${prefix}’.  Any directories that were specified during ‘configure’,
+but not in terms of ‘${prefix}’, must each be overridden at install time
+for the entire installation to be relocated.  The approach of makefile
+variable overrides for each directory variable is required by the GNU
+Coding Standards, and ideally causes no recompilation.  However, some
+platforms have known limitations with the semantics of shared libraries
+that end up requiring recompilation when using this method, particularly
+noticeable in packages that use GNU Libtool.
+
+   The second method involves providing the ‘DESTDIR’ variable.  For
+example, ‘make install DESTDIR=/alternate/directory’ will prepend
+‘/alternate/directory’ before all installation names.  The approach of
+‘DESTDIR’ overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters.  On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of ‘${prefix}’
+at ‘configure’ time.
+
+Optional Features
+=================
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving ‘configure’ the
+option ‘--program-prefix=PREFIX’ or ‘--program-suffix=SUFFIX’.
+
+   Some packages pay attention to ‘--enable-FEATURE’ and
+‘--disable-FEATURE’ options to ‘configure’, where FEATURE indicates an
+optional part of the package.  They may also pay attention to
+‘--with-PACKAGE’ and ‘--without-PACKAGE’ options, where PACKAGE is
+something like ‘gnu-ld’.  ‘./configure --help’ should mention the
+‘--enable-...’ and ‘--with-...’ options that the package recognizes.
+
+   Some packages offer the ability to configure how verbose the
+execution of ‘make’ will be.  For these packages, running ‘./configure
+--enable-silent-rules’ sets the default to minimal output, which can be
+overridden with ‘make V=1’; while running ‘./configure
+--disable-silent-rules’ sets the default to verbose, which can be
+overridden with ‘make V=0’.
+
+Specifying a System Type
+========================
+
+   By default ‘configure’ builds for the current system.  To create
+binaries that can run on a different system type, specify a
+‘--host=TYPE’ option along with compiler variables that specify how to
+generate object code for TYPE.  For example, to create binaries intended
+to run on a 64-bit ARM processor:
+
+     ./configure --host=aarch64-linux-gnu \
+        CC=aarch64-linux-gnu-gcc \
+        CXX=aarch64-linux-gnu-g++
+
+If done on a machine that can execute these binaries (e.g., via
+‘qemu-aarch64’, ‘$QEMU_LD_PREFIX’, and Linux’s ‘binfmt_misc’
+capability), the build behaves like a native build.  Otherwise it is a
+cross-build: ‘configure’ will make cross-compilation guesses instead of
+running test programs, and ‘make check’ will not work.
+
+   A system type can either be a short name like ‘mingw64’, or a
+canonical name like ‘x86_64-pc-linux-gnu’.  Canonical names have the
+form CPU-COMPANY-SYSTEM where SYSTEM is either OS or KERNEL-OS.  To
+canonicalize and validate a system type, you can run the command
+‘config.sub’, which is often squirreled away in a subdirectory like
+‘build-aux’.  For example:
+
+     $ build-aux/config.sub arm64-linux
+     aarch64-unknown-linux-gnu
+     $ build-aux/config.sub riscv-lnx
+     Invalid configuration 'riscv-lnx': OS 'lnx' not recognized
+
+You can look at the ‘config.sub’ file to see which types are recognized.
+If the file is absent, this package does not need the system type.
+
+   If ‘configure’ fails with the diagnostic “cannot guess build type”.
+‘config.sub’ did not recognize your system’s type.  In this case, first
+fetch the newest versions of these files from the GNU config package
+(https://savannah.gnu.org/projects/config).  If that fixes things,
+please report it to the maintainers of the package containing
+‘configure’.  Otherwise, you can try the configure option ‘--build=TYPE’
+where TYPE comes close to your system type; also, please report the
+problem to <config-patches@gnu.org>.
+
+   For more details about configuring system types, see the Autoconf
+documentation.
+
+Sharing Defaults
+================
+
+   If you want to set default values for ‘configure’ scripts to share,
+you can create a site shell script called ‘config.site’ that gives
+default values for variables like ‘CC’, ‘cache_file’, and ‘prefix’.
+‘configure’ looks for ‘PREFIX/share/config.site’ if it exists, then
+‘PREFIX/etc/config.site’ if it exists.  Or, you can set the
+‘CONFIG_SITE’ environment variable to the location of the site script.
+A warning: not all ‘configure’ scripts look for a site script.
+
+Defining Variables
+==================
+
+   Variables not defined in a site shell script can be set in the
+environment passed to ‘configure’.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the ‘configure’ command line, using ‘VAR=value’.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified ‘gcc’ to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for ‘CONFIG_SHELL’ due to an
+Autoconf limitation.  Until the limitation is lifted, you can use this
+workaround:
+
+     CONFIG_SHELL=/bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+‘configure’ Invocation
+======================
+
+   ‘configure’ recognizes the following options to control how it
+operates.
+
+‘--help’
+‘-h’
+     Print a summary of all of the options to ‘configure’, and exit.
+
+‘--help=short’
+‘--help=recursive’
+     Print a summary of the options unique to this package’s
+     ‘configure’, and exit.  The ‘short’ variant lists options used only
+     in the top level, while the ‘recursive’ variant lists options also
+     present in any nested packages.
+
+‘--version’
+‘-V’
+     Print the version of Autoconf used to generate the ‘configure’
+     script, and exit.
+
+‘--cache-file=FILE’
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally ‘config.cache’.  FILE defaults to ‘/dev/null’ to
+     disable caching.
+
+‘--config-cache’
+‘-C’
+     Alias for ‘--cache-file=config.cache’.
+
+‘--srcdir=DIR’
+     Look for the package’s source code in directory DIR.  Usually
+     ‘configure’ can determine that directory automatically.
+
+‘--prefix=DIR’
+     Use DIR as the installation prefix.  See “Installation Names” for
+     more details, including other options available for fine-tuning the
+     installation locations.
+
+‘--host=TYPE’
+     Build binaries for system TYPE.  See “Specifying a System Type”.
+
+‘--enable-FEATURE’
+‘--disable-FEATURE’
+     Enable or disable the optional FEATURE.  See “Optional Features”.
+
+‘--with-PACKAGE’
+‘--without-PACKAGE’
+     Use or omit PACKAGE when building.  See “Optional Features”.
+
+‘--quiet’
+‘--silent’
+‘-q’
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to ‘/dev/null’ (any error
+     messages will still be shown).
+
+‘--no-create’
+‘-n’
+     Run the configure checks, but stop before creating any output
+     files.
+
+‘configure’ also recognizes several environment variables, and accepts
+some other, less widely useful, options.  Run ‘configure --help’ for
+more details.
+
+Copyright notice
+================
+
+   Copyright © 1994–1996, 1999–2002, 2004–2017, 2020–2025 Free Software
+Foundation, Inc.
+
+   Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved.  This file is offered as-is,
+without warranty of any kind.

{libcaes-20240114 → libcaes-20251121}/Makefile.am

@@ -48,8 +48,15 @@ EXTRA_DIST = \
 	$(SETUP_PY_FILES) \
 	$(SPEC_FILES)
 
-MAINTAINERCLEANFILES = \
-	Makefile.in
+DISTCLEANFILES = \
+	config.status \
+	config.cache \
+	config.log \
+	libcaes.pc \
+	libcaes.spec \
+	Makefile \
+	Makefile.in \
+	po/Makevars
 
 pkgconfigdir = $(libdir)/pkgconfig
 
@@ -67,15 +74,3 @@ library:
 	(cd $(srcdir)/libcaes && $(MAKE) $(AM_MAKEFLAGS))
 	(cd $(srcdir)/po && $(MAKE) $(AM_MAKEFLAGS))
 
-distclean: clean
-	-rm -f Makefile
-	-rm -f config.status
-	-rm -f config.cache
-	-rm -f config.log
-	-rm -f libcaes.pc
-	-rm -f libcaes.spec
-	@for dir in ${subdirs}; do \
-		(cd $$dir && $(MAKE) distclean) \
-		|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-

{libcaes-20240114 → libcaes-20251121}/Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# Makefile.in generated by automake 1.18.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+# Copyright (C) 1994-2025 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -70,6 +70,8 @@ am__make_running_with_option = \
   test $$has_opt = yes
 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+am__rm_f = rm -f $(am__rm_f_notfound)
+am__rm_rf = rm -rf $(am__rm_f_notfound)
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -163,10 +165,9 @@ am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
+  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
   }
 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
 DATA = $(pkgconfig_DATA)
@@ -211,8 +212,8 @@ distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
   if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
+    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
+      ; rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
 am__post_remove_distdir = $(am__remove_distdir)
@@ -242,14 +243,16 @@ am__relativize = \
   done; \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
+GZIP_ENV = -9
 DIST_TARGETS = dist-gzip
 # Exists only to be overridden by the user if desired.
 AM_DISTCHECK_DVI_TARGET = dvi
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
+distcleancheck_listfiles = \
+  find . \( -type f -a \! \
+            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -388,8 +391,10 @@ ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__rm_f_notfound = @am__rm_f_notfound@
 am__tar = @am__tar@
 am__untar = @am__untar@
+am__xargs_n = @am__xargs_n@
 ax_libcerror_pc_libs_private = @ax_libcerror_pc_libs_private@
 ax_libcerror_spec_build_requires = @ax_libcerror_spec_build_requires@
 ax_libcerror_spec_requires = @ax_libcerror_spec_requires@
@@ -493,8 +498,15 @@ EXTRA_DIST = \
 	$(SETUP_PY_FILES) \
 	$(SPEC_FILES)
 
-MAINTAINERCLEANFILES = \
-	Makefile.in
+DISTCLEANFILES = \
+	config.status \
+	config.cache \
+	config.log \
+	libcaes.pc \
+	libcaes.spec \
+	Makefile \
+	Makefile.in \
+	po/Makevars
 
 pkgconfigdir = $(libdir)/pkgconfig
 pkgconfig_DATA = \
@@ -688,12 +700,13 @@ cscopelist-am: $(am__tagged_files)
 distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
 distdir: $(BUILT_SOURCES)
 	$(MAKE) $(AM_MAKEFLAGS) distdir-am
 
 distdir-am: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
+	$(AM_V_at)$(MKDIR_P) "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -763,6 +776,10 @@ dist-bzip2: distdir
 	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
 	$(am__post_remove_distdir)
 
+dist-bzip3: distdir
+	tardir=$(distdir) && $(am__tar) | bzip3 -c >$(distdir).tar.bz3
+	$(am__post_remove_distdir)
+
 dist-lzip: distdir
 	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
 	$(am__post_remove_distdir)
@@ -804,9 +821,11 @@ dist dist-all:
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.bz3*) \
+	  bzip3 -dc $(distdir).tar.bz3 | $(am__untar) ;;\
 	*.tar.lz*) \
 	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
 	*.tar.xz*) \
@@ -814,7 +833,7 @@ distcheck: dist
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	*.tar.zst*) \
@@ -917,17 +936,20 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
+	-$(am__rm_f) $(DISTCLEANFILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
 	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
 clean: clean-recursive
 
 clean-am: clean-generic clean-libtool mostlyclean-am
 
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
 distclean-am: clean-am distclean-generic distclean-libtool \
 	distclean-tags
 
@@ -1004,8 +1026,8 @@ uninstall-am: uninstall-pkgconfigDATA
 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
 	am--refresh check check-am clean clean-cscope clean-generic \
 	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-	dist-xz dist-zip dist-zstd distcheck distclean \
+	dist-all dist-bzip2 dist-bzip3 dist-gzip dist-lzip dist-shar \
+	dist-tarZ dist-xz dist-zip dist-zstd distcheck distclean \
 	distclean-generic distclean-libtool distclean-tags \
 	distcleancheck distdir distuninstallcheck dvi dvi-am html \
 	html-am info info-am install install-am install-data \
@@ -1033,18 +1055,13 @@ library:
 	(cd $(srcdir)/libcaes && $(MAKE) $(AM_MAKEFLAGS))
 	(cd $(srcdir)/po && $(MAKE) $(AM_MAKEFLAGS))
 
-distclean: clean
-	-rm -f Makefile
-	-rm -f config.status
-	-rm -f config.cache
-	-rm -f config.log
-	-rm -f libcaes.pc
-	-rm -f libcaes.spec
-	@for dir in ${subdirs}; do \
-		(cd $$dir && $(MAKE) distclean) \
-		|| case "$(MFLAGS)" in *k*) fail=yes;; *) exit 1;; esac; \
-	done && test -z "$$fail"
-
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
+
+# Tell GNU make to disable its built-in pattern rules.
+%:: %,v
+%:: RCS/%,v
+%:: RCS/%
+%:: s.%
+%:: SCCS/s.%

{libcaes-20240114 → libcaes-20251121}/PKG-INFO

@@ -1,13 +1,16 @@
-Metadata-Version: 2.1
+Metadata-Version: 2.4
 Name: libcaes-python
-Version: 20240114
+Version: 20251121
 Summary: Python bindings module for libcaes
 Author: Joachim Metz
 Author-email: joachim.metz@gmail.com
 License: GNU Lesser General Public License v3 or later (LGPLv3+)
 Classifier: Development Status :: 3 - Alpha
 Classifier: Programming Language :: Python
-Requires-Python: >=3.7
+Requires-Python: >=3.10
 Description-Content-Type: text/plain
+License-File: COPYING
+License-File: COPYING.LESSER
+Dynamic: license-file
 
 Python bindings module for libcaes

{libcaes-20240114 → libcaes-20251121}/acinclude.m4

@@ -1,6 +1,6 @@
 dnl Checks for required headers and functions
 dnl
-dnl Version: 20220529
+dnl Version: 20240520
 
 dnl Function to detect if libcaes dependencies are available
 AC_DEFUN([AX_LIBCAES_CHECK_LOCAL],