gliquid 0.3.3__tar.gz → 0.3.5__tar.gz
This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
- {gliquid-0.3.3 → gliquid-0.3.5}/CHANGELOG.md +250 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/CITATION.cff +2 -2
- {gliquid-0.3.3 → gliquid-0.3.5}/PKG-INFO +1 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/notebooks/GaRu_adjustment.ipynb +1 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/notebooks/PbTb_adjustment.ipynb +1 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/notebooks/colab_demo.ipynb +1 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/notebooks/fitting_demo.ipynb +1 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/notebooks/interpolation_demo.ipynb +1 -1
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/_version.py +2 -2
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/binary.py +12 -3
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/hsx.py +12 -5
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/imputation/__init__.py +4 -0
- gliquid-0.3.5/src/gliquid/imputation/entry_list.py +245 -0
- gliquid-0.3.5/src/gliquid/imputation/ternary_imputation.py +1198 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/liquidus_sheets.py +142 -78
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/mpds.py +13 -2
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/binary_tx.py +117 -39
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/liquidus_fields.py +490 -126
- gliquid-0.3.5/src/gliquid/plotting/solidus_view.py +232 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/style.py +32 -4
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/ternary_labels.py +116 -14
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/ternary_surface.py +112 -38
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/reference/phase_transitions.json +15 -11
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/solution.py +5 -4
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/ternary.py +681 -49
- gliquid-0.3.3/src/gliquid/imputation/ternary_imputation.py +0 -549
- {gliquid-0.3.3 → gliquid-0.3.5}/.gitattributes +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/.githooks/pre-commit +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/.github/CODEOWNERS +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/.github/dependabot.yml +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/.github/workflows/release.yml +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/.github/workflows/tests.yml +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/.gitignore +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/CONTRIBUTING.md +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/LICENSE +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/README.md +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/assets/digitized_pd_anatomy.png +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/assets/gliq_logo_tall.png +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/assets/invariant_points_and_reactions.png +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/assets/ru_si_assessed_pd.png +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/conftest.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/pyproject.toml +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/requirements/min-constraints.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/scripts/run_colab_notebook.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/scripts/run_notebooks.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/__init__.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/api.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/cache.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/config.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/hull_editor.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/imputation/ablation.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/imputation/binary_imputation.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/imputation/core.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/imputation/lifecycle.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/.gitkeep +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/feature_names.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/features_antisymmetric.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/features_symmetric.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/manifest.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_0/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_10/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_20/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_30/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_42/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_50/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_60/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/L0_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/L0_b.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/L1_a.ubj +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/best_params.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/metadata.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/model_summary.txt +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/models/20261028_105725/seed_70/preprocess.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/phase.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/__init__.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/binary_figs.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/export.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/phase_highlight.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/plotting/ternary_projection.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/production_model_runner.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/reference/omegas_hcp.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/reference/spurious_structures.json +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/shap_compat.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/src/gliquid/solid_coverage.py +0 -0
- {gliquid-0.3.3 → gliquid-0.3.5}/tox.ini +0 -0
|
@@ -9,6 +9,253 @@ source tree carries a version literal that could disagree with this file.
|
|
|
9
9
|
|
|
10
10
|
## [Unreleased]
|
|
11
11
|
|
|
12
|
+
## [0.3.5] - 2026-11-20
|
|
13
|
+
|
|
14
|
+
### Added
|
|
15
|
+
|
|
16
|
+
- **A ternary imputation record reports the enthalpies that bound it on the 0 K hull.**
|
|
17
|
+
`hull_enthalpy` is the hull's formation enthalpy at the phase's composition without the phase:
|
|
18
|
+
below it the phase is on the 0 K hull. `hull_limit_enthalpy`, on a phase that names
|
|
19
|
+
`displaces` and was placed with `force` or `hold_hull`, is the deepest enthalpy that keeps
|
|
20
|
+
those phases.
|
|
21
|
+
- **`force=True` with `hold_hull=True`** holds a phase at the hull limit where an entropy still
|
|
22
|
+
reaches its temperature and places it at its inverted enthalpy where none does; a phase given
|
|
23
|
+
an `enthalpy` or an `entropy` is placed as given. Before, `force` switched `hold_hull` off.
|
|
24
|
+
- **`build_binary_edge_figures(tie_lines={})`** fills the dict with the tie lines each edge
|
|
25
|
+
figure draws.
|
|
26
|
+
- **`plot_tx(canvas=TxCanvas(...))` draws a binary figure at a given size** (figure, margins,
|
|
27
|
+
phase-label and `L` fonts) and places its labels to fit that size; a figure resized after
|
|
28
|
+
`plot_tx` keeps labels placed for the default 750 × 600 px and can overlap at a smaller size.
|
|
29
|
+
`build_binary_edge_figures(canvas=...)` and `TLIPlotter(edge_canvas=...)` pass it to the
|
|
30
|
+
edge figures.
|
|
31
|
+
- **`build_phase_color_map(keep={...})` keeps phase colors across redraws.** A phase listed
|
|
32
|
+
in `keep` keeps its color; a listed phase that is absent holds its color until the palette
|
|
33
|
+
has no other free, and new phases take the free colors. Before, editing a phase moved it to
|
|
34
|
+
the imputed group and shifted the colors after it. `TLIPlotter(keep_colors=...)` passes it to
|
|
35
|
+
the ternary and edge figures.
|
|
36
|
+
- **`TernaryLiquidInterpolation.modified_phase_names()`** names the imputed phases on the solid
|
|
37
|
+
hull that stand in for a DFT entry.
|
|
38
|
+
- **`gliquid.imputation.phase_tops(ti)` gives each line phase's highest stable temperature**
|
|
39
|
+
and what it becomes above it (`PhaseTop`): it melts congruently or incongruently, turns
|
|
40
|
+
into another solid of its composition, or decomposes into other solids. `phase_top` does
|
|
41
|
+
the same for a solid with a given composition, enthalpy and entropy.
|
|
42
|
+
- **A ternary imputation refused for a temperature below the liquid reports
|
|
43
|
+
`lowest_top_k`**, the lowest temperature the phase can be given to leave the hull at, to
|
|
44
|
+
0.01 K.
|
|
45
|
+
- **`refine_liquid=True` places a ternary phase against the liquid itself.**
|
|
46
|
+
`impute_ternary_phases`, `edit_phases`, `phase_top` and `phase_tops` then read the liquid at
|
|
47
|
+
the phase's own composition and on a fine lattice around the liquid its envelope rests on,
|
|
48
|
+
not on the composition grid alone, and the guard margin raises the phase's temperature by at
|
|
49
|
+
most 0.05 K. The phase leaves the hull where the liquidus sheets of the ternary figure put it;
|
|
50
|
+
the processed diagram reads the liquid on the grid and can show it higher, so use it with
|
|
51
|
+
`screen=False`.
|
|
52
|
+
|
|
53
|
+
### Changed
|
|
54
|
+
|
|
55
|
+
- **`get_plot('tx', solidus=True)` draws the binary solidus lines in place of the solidus
|
|
56
|
+
triangles**: the tie lines of the three binary edge figures, each on its side of the figure at
|
|
57
|
+
its temperature. In a browser the parts of a line behind the liquidus are still not drawn.
|
|
58
|
+
The triangles' outlines and hover fill are gone, and the temperature window no longer reaches
|
|
59
|
+
down to the coldest triangle. `TLIPlotter.solidus_triangles()` and the bottoms of
|
|
60
|
+
`liquidus_ranges()` are unchanged.
|
|
61
|
+
- **The temperature-axis title of the ternary liquidus figure stands beside the axis.** It is a
|
|
62
|
+
scene annotation at the vertical edge of the box plotly draws the z axis on, upright as before;
|
|
63
|
+
in a browser it follows the axis as the camera turns, and
|
|
64
|
+
`gliquid.plotting.ternary_labels.orient_labels` places it for a camera set in Python. It was
|
|
65
|
+
an annotation fixed to the left margin of the figure.
|
|
66
|
+
- **An imputed phase that stands in for a DFT entry is named `(modified)`** in the legend and
|
|
67
|
+
hover text of the ternary liquidus figure; any other imputed phase is still `(imputed)`.
|
|
68
|
+
- **The line of an imputed or user-defined phase in the ternary liquidus figure is dashed more
|
|
69
|
+
densely**: each dash is 1.4% of the temperature window long, each gap 0.6%
|
|
70
|
+
(`gliquid.plotting.style.SOLID_LINE_DASH_3D`). The dashes are drawn as separate segments, so
|
|
71
|
+
the trace's `line.dash` is no longer set.
|
|
72
|
+
- **The ternary liquidus legend lists the elemental polymorphs by component, in the order of
|
|
73
|
+
the system name, and then by transition temperature**, ahead of the other phases; the other
|
|
74
|
+
line phases follow by composition, richest in the first component first, and the solid
|
|
75
|
+
solutions come last.
|
|
76
|
+
`TernaryLiquidInterpolation.color_map` keeps that order; the colours are unchanged. They were
|
|
77
|
+
listed in the order of the hull's phase names.
|
|
78
|
+
|
|
79
|
+
- **`edit_phases` keeps the interpolated liquid when it removes no phase.** It was interpolated
|
|
80
|
+
again for every edit.
|
|
81
|
+
- **A ternary phase given an `enthalpy` or an `entropy` beside its `temperature` leaves the
|
|
82
|
+
hull at that temperature in the diagram drawn with it.** Its energy is solved without the
|
|
83
|
+
phases without an entropy that it pushes off the 0 K hull, which the hull drawn with it leaves
|
|
84
|
+
out. It was solved with them, and the phase could top out at another temperature.
|
|
85
|
+
- **A ternary phase given an `enthalpy` or an `entropy` beside its `temperature` can leave the
|
|
86
|
+
hull into solids alone.** Where no liquid lies around it at that temperature it takes the
|
|
87
|
+
entropy, below theirs, that puts it on their tie line there: it decomposes into them on
|
|
88
|
+
heating. It was refused as `below_solidus`.
|
|
89
|
+
- **The Colab notebooks install `gliquid` without capping pymatgen.** emmet-core reaches
|
|
90
|
+
`pymatgen-core` through `pymatgen-io-validation` whatever pymatgen is capped at, and every
|
|
91
|
+
`pymatgen-core` release needs `requests>=2.32.5`, so `pymatgen<2026` kept neither Colab's
|
|
92
|
+
`requests` 2.32.4 nor a single pymatgen version. pip still notes that google-colab pins
|
|
93
|
+
`requests==2.32.4`; the install and the notebooks work.
|
|
94
|
+
- **The Hf-Zr diagram in `cache/` is `cache/Hf-Zr.json`**, named like the others, and loads
|
|
95
|
+
with `pd_ind=0` or `pd_ind=None`. The Pb-Rb and Bi-La diagrams and DFT entries and the Al-Mg
|
|
96
|
+
DFT entries are no longer in `cache/`.
|
|
97
|
+
|
|
98
|
+
### Fixed
|
|
99
|
+
|
|
100
|
+
- **An imputed phase whose name reads as a formula other than its composition keeps that name**
|
|
101
|
+
in the legend and hover text of the ternary liquidus figure. A phase named `Ce12Fe34Si56` at
|
|
102
|
+
Ce2FeSi was shown as Ce6Fe17Si28, the name's formula reduced.
|
|
103
|
+
- **Where two solid phases meet on one vertical line of the ternary liquidus figure, the
|
|
104
|
+
change is drawn at the temperature at which their Gibbs energies cross**, so an elemental
|
|
105
|
+
polymorph transition lies at its transition temperature, level with the binary solidus line
|
|
106
|
+
of that transition. It was drawn at the last temperature of the grid below it.
|
|
107
|
+
- **A solid phase's line in the ternary liquidus figure ends on the liquidus surface** where
|
|
108
|
+
the surface lies below its last stable temperature or within one grid step above it, so no
|
|
109
|
+
line rises through the surface; a line that ends
|
|
110
|
+
further below the surface (a phase that decomposes in the solid state or melts
|
|
111
|
+
incongruently) ends on the binary edge tie line through it where one lies within that grid
|
|
112
|
+
step, and otherwise still ends at its last stable grid temperature.
|
|
113
|
+
- **The ternary liquidus figure and its binary edge figures name compounds in the order of the
|
|
114
|
+
system's components** (`gliquid.plotting.style.standard_formula`), in the legend, the hover
|
|
115
|
+
text and the field labels: `Ga3Y` in Ga-Y, where they showed pymatgen's `YGa3`. The phase
|
|
116
|
+
names the model stores and returns are unchanged.
|
|
117
|
+
- **An edge figure's MAPE chip names the ranges a gapped digitized liquidus covers**:
|
|
118
|
+
`MAPE 13.2% (0–7, 89–100 at.% Ba)` where its points leave a gap wider than
|
|
119
|
+
`gliquid.ternary.LIQUIDUS_GAP`. The MAPE is taken over whatever the liquidus covers, so an
|
|
120
|
+
edge whose liquidus covers less than 70% of the composition range now gets a chip; it had
|
|
121
|
+
none.
|
|
122
|
+
|
|
123
|
+
## [0.3.4] - 2026-11-16
|
|
124
|
+
|
|
125
|
+
### Added
|
|
126
|
+
|
|
127
|
+
- **The ternary liquidus figure draws the solidus with `get_plot('tx', solidus=True)`** (off by
|
|
128
|
+
default). Each triangle of three solid phases is drawn flat at the temperature the liquid leaves
|
|
129
|
+
it, outlined in the colour of a binary tie line. In a browser, the parts of an outline that lie
|
|
130
|
+
behind the liquidus from the camera are not drawn, and the triangle under the pointer is lightly
|
|
131
|
+
filled with the three phases' colours, each strongest at its own corner; a static export draws
|
|
132
|
+
every outline whole and no fill.
|
|
133
|
+
`TLIPlotter.solidus_triangles()` returns the triangles: the three phases, their
|
|
134
|
+
compositions, the liquid's composition and the temperature. They are read from the
|
|
135
|
+
three-field joints of the drawn liquidus; a triangle whose last liquid is too dilute in a
|
|
136
|
+
component for the surface to hold its joint (next to a low-melting element that does not mix
|
|
137
|
+
with the others) is solved from the solids' lower hull instead. The bottom of a phase's
|
|
138
|
+
`liquidus_ranges()` is lowered to its coldest solidus triangle whether or not the triangles
|
|
139
|
+
are drawn; with `solidus=True` the drawn temperature window reaches down to the coldest
|
|
140
|
+
triangle unless `temp_range` pins its floor.
|
|
141
|
+
- **`TLIPlotter.liquidus_ranges()`** returns each solid phase's lowest and highest temperature
|
|
142
|
+
in contact with the liquid, read from the phase fields of the last `'tx'` plot. The hull
|
|
143
|
+
table reports a phase's top on its `T_incr` ladder (25 K with `hull_mode='gtx'`); the field
|
|
144
|
+
gives it to the mesh, and exactly for a phase that melts congruently.
|
|
145
|
+
- **`TernaryLiquidInterpolation.edit_phases(edits)`** (`gliquid.imputation.edit_ternary_phases`)
|
|
146
|
+
applies a list of phase removals, temperature changes and additions in one call. A removal
|
|
147
|
+
leaves every DFT entry at the phase's composition off the hull.
|
|
148
|
+
- **`hold_hull=True`** on the ternary imputation calls places a phase that would push a stable
|
|
149
|
+
phase off the 0 K hull instead of refusing it: its enthalpy is held at the deepest value that
|
|
150
|
+
keeps those phases, and it carries the entropy at which it still leaves the hull at the
|
|
151
|
+
requested temperature. The record reports that entropy (`entropy`) and the phases the
|
|
152
|
+
unheld enthalpy would have displaced (`displaces`).
|
|
153
|
+
- **A ternary system's entries as a list, and a list read back.**
|
|
154
|
+
`TernaryLiquidInterpolation.export_entries()` lists the entries of the 0 K solid hull as
|
|
155
|
+
`ComputedEntry` dicts of plain JSON types, imputed and user-defined phases included, each
|
|
156
|
+
with its corrections folded into its energy and its entropy under
|
|
157
|
+
`data["entropy_j_per_mol_k"]`;
|
|
158
|
+
`PhaseDiagram([ComputedEntry.from_dict(d) for d in entries])` builds the same hull.
|
|
159
|
+
`entry_list_edits(entries)` compares such a list with the system and returns the `edit_phases`
|
|
160
|
+
edits that give it the list's phases: a phase whose formation enthalpy or entropy differs is
|
|
161
|
+
changed, a phase at a new composition is added, and a phase the list has no entry for is
|
|
162
|
+
removed. Formation enthalpies are taken against the list's own elemental references, and the
|
|
163
|
+
elements whose reference differs from the system's are reported (`reference_shifts`).
|
|
164
|
+
- **`edit_phases` removes a phase the store imputed**, with the entries it stands in for, and
|
|
165
|
+
takes `"force": True` on a single edit.
|
|
166
|
+
- **`enthalpy=` and `entropy=`** on the ternary imputation calls and in `edit_phases` place a
|
|
167
|
+
phase by its formation enthalpy (J/mol-atom) or its entropy (J/mol-atom/K). Given both, the
|
|
168
|
+
phase carries them as they are. Given one with a temperature, the other is solved so the
|
|
169
|
+
phase leaves the hull at that temperature; given one with a `solidus` and no temperature, so
|
|
170
|
+
it joins the hull there on heating. A phase above the 0 K hull needs a positive entropy, and
|
|
171
|
+
a given enthalpy that would push a stable phase off the 0 K hull is refused (`hold_hull` does
|
|
172
|
+
not move it) unless `force` is set. `impute_phase` takes its temperature as optional.
|
|
173
|
+
- **`solidus=`** on the ternary imputation calls and in `edit_phases` places a phase on the
|
|
174
|
+
hull between two temperatures: it joins the hull at the solidus on heating and leaves it at
|
|
175
|
+
its temperature. Its enthalpy and entropy are solved from the envelope at both, so it lies
|
|
176
|
+
above the 0 K hull and displaces nothing there. The solidus must be a temperature at which
|
|
177
|
+
the liquid reaches the phase's composition, and the solved entropy may take up to 0.9 of the
|
|
178
|
+
envelope's at the top (`SOLIDUS_ENTROPY_SHARE`); a refusal reports the nearest solidus that
|
|
179
|
+
works (`solidus_limit_k`).
|
|
180
|
+
- **An imputed entry carrying an entropy is placed above the 0 K hull**, as a user-defined
|
|
181
|
+
one already was, and a binary edge figure draws a hull entry with the entropy it carries
|
|
182
|
+
(it used zero).
|
|
183
|
+
|
|
184
|
+
### Changed
|
|
185
|
+
|
|
186
|
+
- **Ternary phase fields with a two-liquid region are drawn faster in both hull modes: about
|
|
187
|
+
1.5 times over a 2,300-system set, more than 4 times where they were slowest** (Bi-Sn-Th 458 s
|
|
188
|
+
to 96 s with `hull_mode='gtx'`, 642 s to 92 s with `'hsx'`). The binodal solver calls the
|
|
189
|
+
liquid model fewer times, on more points per call, and a triple point's Jacobian and its step
|
|
190
|
+
halvings each take one evaluation of the sheets; these steps leave the drawn surface as it
|
|
191
|
+
was. The lower hulls of one build share the hull of their composition points, which shortens
|
|
192
|
+
the hull stage by about a tenth. The search for a re-entrant two-liquid window drops a point
|
|
193
|
+
once its best value lies far from a window (`SEARCH.hump_reach`), which takes a further sixth
|
|
194
|
+
off the 14 slowest systems and leaves their surfaces bit-identical.
|
|
195
|
+
- **The edge of a two-liquid field is located to 2e-4 in mole fraction** (`WALL.width`), or
|
|
196
|
+
to 0.8% of the distance to the nearest side of the triangle where that is narrower,
|
|
197
|
+
instead of a millionth of each mesh edge, and a crossing with the two-liquid sheet is placed
|
|
198
|
+
once the two sheets agree to the 0.01 K that sheet is solved to. A wall's two vertices sit at
|
|
199
|
+
the two ends of that bracket. The liquidus at the grid nodes is unchanged; vertices next to a
|
|
200
|
+
two-liquid wall move by less than the bracket.
|
|
201
|
+
- **The binary edge figures of a ternary build are made about three times faster** (a median
|
|
202
|
+
of 1.6 s to 0.5 s per system over 30 systems), which shortens `process_data()` by a fifth
|
|
203
|
+
with `hull_mode='gtx'` and by over a quarter with `'hsx'`. `plot_tx` makes each phase line
|
|
204
|
+
and tie line as one trace instead of building a `plotly.express` figure for it; the figures
|
|
205
|
+
are unchanged.
|
|
206
|
+
- **A cliff at the edge of a two-liquid field is drawn without dark slivers or fins.** Every
|
|
207
|
+
face of the partition lists its vertices counter-clockwise, so neighbouring faces are shaded
|
|
208
|
+
alike; a wall's vertex on the two-liquid side sits `WALL.setback` (5e-4 in plot units) inside
|
|
209
|
+
the wall and takes the two-liquid sheet there; and an edge that leaves the field up a rise of
|
|
210
|
+
more than `WALL.jump` is split until the surface follows the sheet, its miss measured across
|
|
211
|
+
the surface as for the edges leaving a side. Vertices next to walls and steep edges move; the
|
|
212
|
+
fields and the liquidus at the grid nodes are unchanged.
|
|
213
|
+
- **The dotted outline of the two-liquid field is not drawn along the sides of the composition
|
|
214
|
+
triangle.** Stretches within `GAP_OUTLINE_CLEARANCE` (0.01 in mole fraction) of a side are
|
|
215
|
+
left out, and so is a run of the rest that never gets twice that far from the sides.
|
|
216
|
+
`field_boundaries(partition, phase, clear=...)` takes the clearance and returns the whole
|
|
217
|
+
outline without it.
|
|
218
|
+
- **A piece of the two-liquid field that leads the solids by at most 10 K (`SHALLOW_GAP`)
|
|
219
|
+
belongs to the solids' fields**: it has no outline, and each of its faces goes to the solid
|
|
220
|
+
hottest there. The surface keeps its temperatures.
|
|
221
|
+
|
|
222
|
+
### Fixed
|
|
223
|
+
|
|
224
|
+
- **`adjust_phase_temperature` no longer refuses a move because of a phase that is only
|
|
225
|
+
stable while the adjusted phase is lifted out.** The 0 K hull guard protected every compound
|
|
226
|
+
stable once the phase's DFT entries were left off, including ones the phase normally hides
|
|
227
|
+
(Ag-Na: moving NaAg2 was refused for displacing NaAg3, which is not on the hull). It now
|
|
228
|
+
protects the compounds that are stable with those entries in place.
|
|
229
|
+
- **Three solid phase fields on the ternary liquidus now meet at their triple point.** Where
|
|
230
|
+
the triple point lay outside the mesh triangle whose three nodes carry the three phases, the
|
|
231
|
+
fields were joined at the nearest point of that triangle, and one triple point could be drawn
|
|
232
|
+
as several such joints. This happened next to a side or a corner of the diagram, where a
|
|
233
|
+
liquidus sheet is steep: on a 31-system sample, 23 systems had a joint whose three sheets
|
|
234
|
+
differed by more than 1 K and 7 by more than 25 K (251 K in Rb-Si-V). Such a triangle now has
|
|
235
|
+
an edge split, where the third phase is the hottest at the crossing of the edge's two phases,
|
|
236
|
+
until it holds the triple point; every joint of the sample is then within 0.005 K. Over a
|
|
237
|
+
2,300-system set the surface gains 0.9% more vertices (17% at most) and the figure is drawn
|
|
238
|
+
4% faster, because the refinement no longer samples new triangles that are too small to
|
|
239
|
+
split. The lowest and highest temperatures `TLIPlotter.liquidus_ranges` reports for a field
|
|
240
|
+
move with its joints.
|
|
241
|
+
- **Two solid phase fields now meet the two-liquid field where their own boundary enters
|
|
242
|
+
it.** Such a joint was left at the nearest point of the mesh triangle whose nodes carry the
|
|
243
|
+
three fields: on 100 systems with a two-liquid field, 203 of 447 joints away from the sides
|
|
244
|
+
had the two solids' sheets more than 0.05 K apart (44 K at most). The edges of these
|
|
245
|
+
triangles are now split as those of three solid phases are, and the joint is placed by
|
|
246
|
+
bisecting the solids' boundary on whether the two-liquid sheet is the hottest
|
|
247
|
+
(`GAP_JOINT`), which also places a joint on a two-liquid wall, where the three sheets are
|
|
248
|
+
never equal. One of the 450 joints is then more than 0.05 K apart (0.18 K). A joint the
|
|
249
|
+
bisection leaves with the two solids' sheets more than 1 K apart, as against a side of the
|
|
250
|
+
triangle, takes the point where the three sheets meet when the solids are closer there. A
|
|
251
|
+
joint at a corner of the triangle can still be open.
|
|
252
|
+
- `extract_digitized_liquidus` reads a narrow few-vertex `L` wedge (at most 0.05 wide in
|
|
253
|
+
composition) from its whole outline instead of keeping its hottest tip as the only point.
|
|
254
|
+
- `phase_transitions.json` cites the CRC Handbook instead of Wolfram ElementData for the
|
|
255
|
+
melting points of Ce, Nd, Tb, Ho and Yb (92nd ed.) and the enthalpies of fusion of Tb, Dy, Ho,
|
|
256
|
+
Lu and Pm (97th ed., "Physical Properties of the Rare Earth Metals"; Ho, Lu and Pm are
|
|
257
|
+
estimates). No value changes.
|
|
258
|
+
|
|
12
259
|
## [0.3.3] - 2026-11-09
|
|
13
260
|
|
|
14
261
|
### Added
|
|
@@ -962,7 +1209,9 @@ earlier published versions to diff against; this entry describes what the packag
|
|
|
962
1209
|
- **An empty Materials Project fetch now raises rather than being cached.** A zero-entry result
|
|
963
1210
|
used to be written out as a 2-byte `[]`, which every later read then accepted as a warm cache.
|
|
964
1211
|
|
|
965
|
-
[Unreleased]: https://github.com/willwerj/gliquid_python/compare/v0.3.
|
|
1212
|
+
[Unreleased]: https://github.com/willwerj/gliquid_python/compare/v0.3.5...HEAD
|
|
1213
|
+
[0.3.5]: https://github.com/willwerj/gliquid_python/compare/v0.3.4...v0.3.5
|
|
1214
|
+
[0.3.4]: https://github.com/willwerj/gliquid_python/compare/v0.3.3...v0.3.4
|
|
966
1215
|
[0.3.3]: https://github.com/willwerj/gliquid_python/compare/v0.3.2...v0.3.3
|
|
967
1216
|
[0.3.2]: https://github.com/willwerj/gliquid_python/compare/v0.3.1...v0.3.2
|
|
968
1217
|
[0.3.1]: https://github.com/willwerj/gliquid_python/compare/v0.3.0...v0.3.1
|
|
@@ -7,8 +7,8 @@ abstract: >-
|
|
|
7
7
|
liquid descriptions.
|
|
8
8
|
type: software
|
|
9
9
|
# A literal: bump `version` and `date-released` by hand at each release (CONTRIBUTING.md).
|
|
10
|
-
version: "0.3.
|
|
11
|
-
date-released: "2026-11-
|
|
10
|
+
version: "0.3.5"
|
|
11
|
+
date-released: "2026-11-20"
|
|
12
12
|
license: MIT
|
|
13
13
|
repository-code: "https://github.com/willwerj/gliquid_python"
|
|
14
14
|
url: "https://viz.whsunresearch.group/gliquid/interactive-matrix.html"
|
|
@@ -1,6 +1,6 @@
|
|
|
1
1
|
Metadata-Version: 2.5
|
|
2
2
|
Name: gliquid
|
|
3
|
-
Version: 0.3.
|
|
3
|
+
Version: 0.3.5
|
|
4
4
|
Summary: A package for fitting DFT-referenced liquid free energies from digitized equilibrium phase boundaries
|
|
5
5
|
Project-URL: Homepage, https://viz.whsunresearch.group/gliquid/interactive-matrix.html
|
|
6
6
|
Project-URL: TernaryInterpolation, https://viz.whsunresearch.group/gliquid/ternary-interpolation/
|
|
@@ -21,7 +21,7 @@
|
|
|
21
21
|
"source": [
|
|
22
22
|
"## UNCOMMENT THIS BLOCK FOR GOOGLE COLAB\n",
|
|
23
23
|
"# !git clone --depth 1 https://github.com/willwerj/gliquid_python.git # per-system data in cache/\n",
|
|
24
|
-
"# !pip install -q \"gliquid==0.3.
|
|
24
|
+
"# !pip install -q \"gliquid==0.3.5\"\n",
|
|
25
25
|
"# import gliquid.config as cfg\n",
|
|
26
26
|
"# cfg.set_cache_dir(\"/content/gliquid_python/cache\")\n",
|
|
27
27
|
"# from google.colab import output\n",
|
|
@@ -21,7 +21,7 @@
|
|
|
21
21
|
"source": [
|
|
22
22
|
"## UNCOMMENT THIS BLOCK FOR GOOGLE COLAB\n",
|
|
23
23
|
"# !git clone --depth 1 https://github.com/willwerj/gliquid_python.git # per-system data in cache/\n",
|
|
24
|
-
"# !pip install -q \"gliquid==0.3.
|
|
24
|
+
"# !pip install -q \"gliquid==0.3.5\"\n",
|
|
25
25
|
"# import gliquid.config as cfg\n",
|
|
26
26
|
"# cfg.set_cache_dir(\"/content/gliquid_python/cache\")\n",
|
|
27
27
|
"# from google.colab import output\n",
|
|
@@ -71,7 +71,7 @@
|
|
|
71
71
|
"outputs": [],
|
|
72
72
|
"source": [
|
|
73
73
|
"!git clone --depth 1 https://github.com/willwerj/gliquid_python.git\n",
|
|
74
|
-
"!pip install -q \"gliquid==0.3.
|
|
74
|
+
"!pip install -q \"gliquid==0.3.5\"\n",
|
|
75
75
|
"from google.colab import output\n",
|
|
76
76
|
"output.enable_custom_widget_manager()"
|
|
77
77
|
]
|
|
@@ -30,7 +30,7 @@
|
|
|
30
30
|
"source": [
|
|
31
31
|
"## UNCOMMENT THIS BLOCK FOR GOOGLE COLAB\n",
|
|
32
32
|
"# !git clone --depth 1 https://github.com/willwerj/gliquid_python.git # per-system data in cache/\n",
|
|
33
|
-
"# !pip install -q \"gliquid==0.3.
|
|
33
|
+
"# !pip install -q \"gliquid==0.3.5\"\n",
|
|
34
34
|
"# import gliquid.config as cfg\n",
|
|
35
35
|
"# cfg.set_cache_dir(\"/content/gliquid_python/cache\")\n",
|
|
36
36
|
"# from google.colab import output\n",
|
|
@@ -22,7 +22,7 @@
|
|
|
22
22
|
"source": [
|
|
23
23
|
"## UNCOMMENT THIS BLOCK FOR GOOGLE COLAB\n",
|
|
24
24
|
"# !git clone --depth 1 https://github.com/willwerj/gliquid_python.git # per-system data in cache/\n",
|
|
25
|
-
"# !pip install -q \"gliquid==0.3.
|
|
25
|
+
"# !pip install -q \"gliquid==0.3.5\"\n",
|
|
26
26
|
"# import gliquid.config as cfg\n",
|
|
27
27
|
"# cfg.set_cache_dir(\"/content/gliquid_python/cache\")\n",
|
|
28
28
|
"# from google.colab import output\n",
|
|
@@ -18,7 +18,7 @@ version_tuple: tuple[int | str, ...]
|
|
|
18
18
|
commit_id: str | None
|
|
19
19
|
__commit_id__: str | None
|
|
20
20
|
|
|
21
|
-
__version__ = version = '0.3.
|
|
22
|
-
__version_tuple__ = version_tuple = (0, 3,
|
|
21
|
+
__version__ = version = '0.3.5'
|
|
22
|
+
__version_tuple__ = version_tuple = (0, 3, 5)
|
|
23
23
|
|
|
24
24
|
__commit_id__ = commit_id = None
|
|
@@ -32,6 +32,7 @@ import gliquid.plotting.export as plot_export
|
|
|
32
32
|
import gliquid.solid_coverage as solid_coverage
|
|
33
33
|
import gliquid.solution as solution
|
|
34
34
|
from gliquid.cache import (
|
|
35
|
+
ENTROPY_KEY,
|
|
35
36
|
imputed_entry_label,
|
|
36
37
|
non_dft_entry_kind,
|
|
37
38
|
non_dft_entry_label,
|
|
@@ -489,10 +490,18 @@ def build_phases_from_chull(
|
|
|
489
490
|
|
|
490
491
|
Returns:
|
|
491
492
|
list[Phase]: Elemental polymorphs and line compounds sorted by composition,
|
|
492
|
-
with the 'L' liquid sentinel appended last.
|
|
493
|
+
with the 'L' liquid sentinel appended last. A line compound is a stable entry of
|
|
494
|
+
``ch``, or an entry carrying an entropy (``data[ENTROPY_KEY]``, J/mol-atom/K), which is
|
|
495
|
+
placed even above the hull.
|
|
493
496
|
"""
|
|
494
497
|
phases = _endpoint_polymorphs(components, component_data, exclude_spacegroups)
|
|
495
|
-
|
|
498
|
+
stable = list(ch.stable_entries)
|
|
499
|
+
lifted = [
|
|
500
|
+
e
|
|
501
|
+
for e in ch.all_entries
|
|
502
|
+
if e not in stable and (getattr(e, "data", None) or {}).get(ENTROPY_KEY)
|
|
503
|
+
]
|
|
504
|
+
for entry in stable + lifted:
|
|
496
505
|
composition = api.entry_frac_along(ch, entry, components)[0]
|
|
497
506
|
if composition in [
|
|
498
507
|
p.fraction_in(components)[0] for p in phases
|
|
@@ -504,7 +513,7 @@ def build_phases_from_chull(
|
|
|
504
513
|
phase_type="solid",
|
|
505
514
|
composition=api.entry_original(entry).composition,
|
|
506
515
|
enthalpy=EV_ATOM_TO_J_MOL * ch.get_form_energy_per_atom(entry),
|
|
507
|
-
entropy=0,
|
|
516
|
+
entropy=float((getattr(entry, "data", None) or {}).get(ENTROPY_KEY, 0.0)),
|
|
508
517
|
**hull_phase_fields(entry),
|
|
509
518
|
),
|
|
510
519
|
)
|
|
@@ -9,6 +9,7 @@ ORCID: https://orcid.org/0000-0001-5205-0075
|
|
|
9
9
|
from __future__ import annotations
|
|
10
10
|
|
|
11
11
|
from collections import defaultdict
|
|
12
|
+
from functools import lru_cache
|
|
12
13
|
|
|
13
14
|
import numpy as np
|
|
14
15
|
import pandas as pd
|
|
@@ -38,15 +39,21 @@ def _hull_from_fictitious(real_points, fict_points, second_filter=None):
|
|
|
38
39
|
return real_simplices
|
|
39
40
|
|
|
40
41
|
|
|
42
|
+
@lru_cache(maxsize=8)
|
|
43
|
+
def _base_hull(coordinates: bytes, columns: int) -> np.ndarray:
|
|
44
|
+
"""The convex-hull vertices of the points whose float64 bytes are ``coordinates``
|
|
45
|
+
(``columns`` per point), followed by their mean. Shared between calls: do not modify."""
|
|
46
|
+
points = np.frombuffer(coordinates).reshape(-1, columns)
|
|
47
|
+
vertices = points[ConvexHull(points).vertices]
|
|
48
|
+
return np.vstack((vertices, np.mean(vertices, axis=0)))
|
|
49
|
+
|
|
50
|
+
|
|
41
51
|
def lower_convex_hull(points, vertical_simplices=False):
|
|
42
52
|
# Lower convex hull of an N-dimensional Xi-E space (energy-like axis last) by the
|
|
43
53
|
# sub-hull-centroid fictitious-point strategy; returns the lower-hull simplices.
|
|
44
54
|
|
|
45
|
-
sub_points = points[:, :-1]
|
|
46
|
-
|
|
47
|
-
sub_hull_points = sub_points[sub_hull.vertices]
|
|
48
|
-
center = np.mean(sub_hull_points, axis=0)
|
|
49
|
-
sub_hull_points = np.vstack((sub_hull_points, center))
|
|
55
|
+
sub_points = np.ascontiguousarray(points[:, :-1], dtype=float)
|
|
56
|
+
sub_hull_points = _base_hull(sub_points.tobytes(), sub_points.shape[1])
|
|
50
57
|
|
|
51
58
|
# Compute upper bound for fictitious points using single-pass ptp
|
|
52
59
|
h_data = points[:, -1]
|
|
@@ -20,6 +20,10 @@ _EXPORTS: dict[str, str] = {
|
|
|
20
20
|
"list_binary_imputation_targets": "gliquid.imputation.binary_imputation",
|
|
21
21
|
"impute_ternary_phase": "gliquid.imputation.ternary_imputation",
|
|
22
22
|
"adjust_ternary_phase_temperature": "gliquid.imputation.ternary_imputation",
|
|
23
|
+
"edit_ternary_phases": "gliquid.imputation.ternary_imputation",
|
|
24
|
+
"PhaseTop": "gliquid.imputation.ternary_imputation",
|
|
25
|
+
"phase_top": "gliquid.imputation.ternary_imputation",
|
|
26
|
+
"phase_tops": "gliquid.imputation.ternary_imputation",
|
|
23
27
|
"IMPUTED_ID_PREFIX": "gliquid.cache",
|
|
24
28
|
"PROVENANCE_KEY": "gliquid.imputation.core",
|
|
25
29
|
"REPLACES_KEY": "gliquid.imputation.core",
|