girder-slicer-cli-web 1.5.4.dev2__tar.gz → 1.5.5.dev2__tar.gz

{girder-slicer-cli-web-1.5.4.dev2 → girder_slicer_cli_web-1.5.5.dev2}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: girder-slicer-cli-web
-Version: 1.5.4.dev2
+Version: 1.5.5.dev2
 Summary: A girder plugin for exposing slicer CLIs over the web
 Home-page: https://github.com/girder/slicer_cli_web
 Author: Kitware, Inc.
@@ -112,7 +112,7 @@ The XML must conform to the `Slicer Execution Schema <https://www.slicer.org/w/i
 
 - The ``region`` type can have a ``coordinateSystem`` property.
 
-- The ``region`` type has an optional ``shapes`` property that is a comma-separated list of values that can include ``default``, ``rectangle``, ``polygon``, ``line``, ``polyline``, and ``point``, plus ``multi`` and one of ``submit`` (or ``sibmitoff``), ``submiton``, or ``autosubmit``.
+- The ``region`` type has an optional ``shapes`` property that is a comma-separated list of values that can include ``default``, ``rectangle``, ``polygon``, ``line``, ``polyline``, and ``point``, plus ``multi`` and one of ``submit`` (or ``submitoff``), ``submiton``, or ``autosubmit``.
   In the official schema, region is a vector of six values of the form x,y,z,rx,ry,rz, defining a rectangle based on its center and radius in each of three dimensions.  This is the ``default`` shape.  The ``rectangle`` shape allows a vector of four values defining a rectangle of the form x,y,width,height, where x,y is the left and top of the rectangle in pixel coordinates.  Many algorithms that accept this value accept -1,-1,-1,-1 as a default to specify the whole conceptual space.  The ``polygon`` shape allows for a list of x,y values.  Polygons must always have at least four points so that the vector of values cannot be confused with the default; repeat the first vertex at the end to specify a triangle.  The ``line`` shape allows a two-vertex line.  To disambiguate this from a rectangle, the values -2,-2 are added after the line.  The ``polyline`` shape allows a multi vertex line, indicated again by a -2,-2 value after the line.  A ``point`` is a single vertex.
   ``multi`` allow multiple shapes, indicated by separating coordinates of each shape by -1,-1.  Note that neither -1,-1 nor -2,-2 are allowed as coordinates within a shape -- to use those, specify them with decimals (e.g., -1.0,-1.0).
   The submit options will add suggestions on how the UI should handle changes.  If present, the option to auto-run a job as soon as a valid shape is set should be present.  ``autosubmit`` means this should always happen.  ``submit`` or ``submitoff`` offers this as a setting but is default to not submit the job.  ``submiton`` offers this as a setting and defaults to submitting the job.

{girder-slicer-cli-web-1.5.4.dev2 → girder_slicer_cli_web-1.5.5.dev2}/README.rst

@@ -76,7 +76,7 @@ The XML must conform to the `Slicer Execution Schema <https://www.slicer.org/w/i
 
 - The ``region`` type can have a ``coordinateSystem`` property.
 
-- The ``region`` type has an optional ``shapes`` property that is a comma-separated list of values that can include ``default``, ``rectangle``, ``polygon``, ``line``, ``polyline``, and ``point``, plus ``multi`` and one of ``submit`` (or ``sibmitoff``), ``submiton``, or ``autosubmit``.
+- The ``region`` type has an optional ``shapes`` property that is a comma-separated list of values that can include ``default``, ``rectangle``, ``polygon``, ``line``, ``polyline``, and ``point``, plus ``multi`` and one of ``submit`` (or ``submitoff``), ``submiton``, or ``autosubmit``.
   In the official schema, region is a vector of six values of the form x,y,z,rx,ry,rz, defining a rectangle based on its center and radius in each of three dimensions.  This is the ``default`` shape.  The ``rectangle`` shape allows a vector of four values defining a rectangle of the form x,y,width,height, where x,y is the left and top of the rectangle in pixel coordinates.  Many algorithms that accept this value accept -1,-1,-1,-1 as a default to specify the whole conceptual space.  The ``polygon`` shape allows for a list of x,y values.  Polygons must always have at least four points so that the vector of values cannot be confused with the default; repeat the first vertex at the end to specify a triangle.  The ``line`` shape allows a two-vertex line.  To disambiguate this from a rectangle, the values -2,-2 are added after the line.  The ``polyline`` shape allows a multi vertex line, indicated again by a -2,-2 value after the line.  A ``point`` is a single vertex.
   ``multi`` allow multiple shapes, indicated by separating coordinates of each shape by -1,-1.  Note that neither -1,-1 nor -2,-2 are allowed as coordinates within a shape -- to use those, specify them with decimals (e.g., -1.0,-1.0).
   The submit options will add suggestions on how the UI should handle changes.  If present, the option to auto-run a job as soon as a valid shape is set should be present.  ``autosubmit`` means this should always happen.  ``submit`` or ``submitoff`` offers this as a setting but is default to not submit the job.  ``submiton`` offers this as a setting and defaults to submitting the job.

{girder-slicer-cli-web-1.5.4.dev2 → girder_slicer_cli_web-1.5.5.dev2}/girder_slicer_cli_web.egg-info/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: girder-slicer-cli-web
-Version: 1.5.4.dev2
+Version: 1.5.5.dev2
 Summary: A girder plugin for exposing slicer CLIs over the web
 Home-page: https://github.com/girder/slicer_cli_web
 Author: Kitware, Inc.
@@ -112,7 +112,7 @@ The XML must conform to the `Slicer Execution Schema <https://www.slicer.org/w/i
 
 - The ``region`` type can have a ``coordinateSystem`` property.
 
-- The ``region`` type has an optional ``shapes`` property that is a comma-separated list of values that can include ``default``, ``rectangle``, ``polygon``, ``line``, ``polyline``, and ``point``, plus ``multi`` and one of ``submit`` (or ``sibmitoff``), ``submiton``, or ``autosubmit``.
+- The ``region`` type has an optional ``shapes`` property that is a comma-separated list of values that can include ``default``, ``rectangle``, ``polygon``, ``line``, ``polyline``, and ``point``, plus ``multi`` and one of ``submit`` (or ``submitoff``), ``submiton``, or ``autosubmit``.
   In the official schema, region is a vector of six values of the form x,y,z,rx,ry,rz, defining a rectangle based on its center and radius in each of three dimensions.  This is the ``default`` shape.  The ``rectangle`` shape allows a vector of four values defining a rectangle of the form x,y,width,height, where x,y is the left and top of the rectangle in pixel coordinates.  Many algorithms that accept this value accept -1,-1,-1,-1 as a default to specify the whole conceptual space.  The ``polygon`` shape allows for a list of x,y values.  Polygons must always have at least four points so that the vector of values cannot be confused with the default; repeat the first vertex at the end to specify a triangle.  The ``line`` shape allows a two-vertex line.  To disambiguate this from a rectangle, the values -2,-2 are added after the line.  The ``polyline`` shape allows a multi vertex line, indicated again by a -2,-2 value after the line.  A ``point`` is a single vertex.
   ``multi`` allow multiple shapes, indicated by separating coordinates of each shape by -1,-1.  Note that neither -1,-1 nor -2,-2 are allowed as coordinates within a shape -- to use those, specify them with decimals (e.g., -1.0,-1.0).
   The submit options will add suggestions on how the UI should handle changes.  If present, the option to auto-run a job as soon as a valid shape is set should be present.  ``autosubmit`` means this should always happen.  ``submit`` or ``submitoff`` offers this as a setting but is default to not submit the job.  ``submiton`` offers this as a setting and defaults to submitting the job.

{girder-slicer-cli-web-1.5.4.dev2 → girder_slicer_cli_web-1.5.5.dev2}/tox.ini

@@ -10,14 +10,14 @@ passenv =
 deps =
   coverage
   mock
-  pytest>=3.6
-  pytest-cov>=2.6
+  pytest
+  pytest-cov
   pytest-forked
-  pytest-girder>=3.1.25.dev9
+  pytest-girder
   pytest-mock
   pytest-xdist
   celery
-  urllib3<1.26
+  urllib3
 extras =
   girder
   worker