gea-program 0.75.0__tar.gz → 0.75.1__tar.gz

{gea_program-0.75.0/gea_program.egg-info → gea_program-0.75.1}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: gea-program
-Version: 0.75.0
+Version: 0.75.1
 Summary: GEA-Program: downhole gauge monitoring - canonical measurement records, quality rules, drift evaluation with a re-fit change log, well-test validation, alarm management, model cards, store-and-forward, monthly SLA measurement, FAT/SAT protocols and a dashboard, generated from live objects in the client's reporting outline.
 Author: Daniel T. Murphy
 License: MPL-2.0
@@ -780,7 +780,7 @@ unsigned, the key hand-overs - and shows the reports as they were signed. A
 reader made from the workspace knows the site's key fingerprints, so it
 says whether a dossier is the site's; it allows no network request, and it
 leaves the trusted time-stamp to `verify_dossier.py`. For a client who wants
-it installed, every release also carries `GEA-Reader-Setup-0.75.0.exe`: GEA
+it installed, every release also carries `GEA-Reader-Setup-0.75.1.exe`: GEA
 Reader as a Windows program of its own - its own icon and taskbar button,
 Check with GEA Reader on a dossier's right-click menu, fingerprints the client
 saves kept on that computer, nothing of GEA-Program. `gea help reader`.
@@ -1545,7 +1545,7 @@ attaches the zips to the GitHub release of that tag.
 
 ### The Windows installer
 
-Every release also carries `GEA-Program-Setup-0.75.0.exe` (for 0.75.0): the
+Every release also carries `GEA-Program-Setup-0.75.1.exe` (for 0.75.1): the
 same Windows kit installed like any Windows program, for the signed-in user
 alone and with no administrator rights (`%LOCALAPPDATA%\Programs\GEA-Program`).
 It asks for the site workspace (an existing one such as `C:\site` is used as
@@ -1564,7 +1564,7 @@ it, removes the program and leaves the workspace. Silent, for a site's
 software deployment:
 
 ```
-GEA-Program-Setup-0.75.0.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"
+GEA-Program-Setup-0.75.1.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"
 ```
 
 The setup is built by Inno Setup 6 from `tools/installer.iss` in the same

{gea_program-0.75.0 → gea_program-0.75.1}/README.md

@@ -741,7 +741,7 @@ unsigned, the key hand-overs - and shows the reports as they were signed. A
 reader made from the workspace knows the site's key fingerprints, so it
 says whether a dossier is the site's; it allows no network request, and it
 leaves the trusted time-stamp to `verify_dossier.py`. For a client who wants
-it installed, every release also carries `GEA-Reader-Setup-0.75.0.exe`: GEA
+it installed, every release also carries `GEA-Reader-Setup-0.75.1.exe`: GEA
 Reader as a Windows program of its own - its own icon and taskbar button,
 Check with GEA Reader on a dossier's right-click menu, fingerprints the client
 saves kept on that computer, nothing of GEA-Program. `gea help reader`.
@@ -1506,7 +1506,7 @@ attaches the zips to the GitHub release of that tag.
 
 ### The Windows installer
 
-Every release also carries `GEA-Program-Setup-0.75.0.exe` (for 0.75.0): the
+Every release also carries `GEA-Program-Setup-0.75.1.exe` (for 0.75.1): the
 same Windows kit installed like any Windows program, for the signed-in user
 alone and with no administrator rights (`%LOCALAPPDATA%\Programs\GEA-Program`).
 It asks for the site workspace (an existing one such as `C:\site` is used as
@@ -1525,7 +1525,7 @@ it, removes the program and leaves the workspace. Silent, for a site's
 software deployment:
 
 ```
-GEA-Program-Setup-0.75.0.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"
+GEA-Program-Setup-0.75.1.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"
 ```
 
 The setup is built by Inno Setup 6 from `tools/installer.iss` in the same

{gea_program-0.75.0 → gea_program-0.75.1}/gea/__init__.py

@@ -123,7 +123,7 @@ from .profile_catalog import (
     read_pangaea_txt,
 )
 
-__version__ = "0.75.0"
+__version__ = "0.75.1"
 __all__ = [
     "aging_rate", "rate_psi_yr", "accuracy_psi",
     "Sensor", "SimulatorConfig", "DownholeEngine",

{gea_program-0.75.0 → gea_program-0.75.1}/gea/acceptance_tests.py

@@ -16101,7 +16101,7 @@ def section_dt_vpn(tmp: str) -> None:
     b_pub = "de9edb7d7b7dc1b4d35b61c2ece435373f8343c85b78674dadfc7e146f882b4f"
     shared = "4a5d9d5ba4ce2de1728e3bf480350f25e07e21c947d19e3376f09b3c1e161742"
     pub_a = X.public_key(a_priv); pub_b = X.public_key(b_priv)
-    wg = shutil.which("wg")
+    wg = shutil.which("wg") if os.name != "nt" else None
     wg_same = None
     if wg:
         try:
@@ -16179,14 +16179,20 @@ def section_dt_vpn(tmp: str) -> None:
         box_names = sorted(n.split("/", 1)[1] for n in z.namelist()); box_conf_z = z.read(f"gea-vpn-{box['id']}/gea-vpn.conf").decode(); vpn_sh = z.read(f"gea-vpn-{box['id']}/vpn.sh").decode()
     with zipfile.ZipFile(rd_zip) as z:
         rd_names = sorted(n.split("/", 1)[1] for n in z.namelist())
-    sh = shutil.which("sh")
+    sh = shutil.which("sh") if os.name != "nt" else None          # the scripts run on Linux hosts; Git's sh.exe on a Windows machine is not that
     sh_ok = None
     if sh:
-        sh_ok = all(subprocess.run([sh, "-n", str(root / f)], capture_output=True, timeout=10).returncode == 0 for f in ("hub/install-hub.sh", f"{box['id']}/vpn.sh"))
-    wgq = shutil.which("wg-quick")
+        try:
+            sh_ok = all(subprocess.run([sh, "-n", str(root / f)], capture_output=True, timeout=10).returncode == 0 for f in ("hub/install-hub.sh", f"{box['id']}/vpn.sh"))
+        except (OSError, subprocess.SubprocessError):
+            sh_ok = None
+    wgq = shutil.which("wg-quick") if os.name != "nt" else None
     strip_ok = None
     if wgq:
-        strip_ok = all(subprocess.run([wgq, "strip", str(root / f)], capture_output=True, timeout=10).returncode == 0 for f in ("hub/gea-vpn.conf", f"{box['id']}/gea-vpn.conf", "office/gea-vpn.conf"))
+        try:
+            strip_ok = all(subprocess.run([wgq, "strip", str(root / f)], capture_output=True, timeout=10).returncode == 0 for f in ("hub/gea-vpn.conf", f"{box['id']}/gea-vpn.conf", "office/gea-vpn.conf"))
+        except (OSError, subprocess.SubprocessError):
+            strip_ok = None
     removed = VP.remove_member(ws, "tester", rd["id"])
     rd_gone_at_once = not rd_zip.exists() and not (root / rd["id"]).exists()
     VP.write_bundles(ws, "tester")

{gea_program-0.75.0 → gea_program-0.75.1}/gea/help/install.md

@@ -2,7 +2,7 @@
 
 > GEA-Program-Setup: the program installed for you like any Windows program - a window of its own, an icon in the notification area, Start-menu and desktop shortcuts, an Add/Remove Programs entry, upgrades in place - with no administrator rights and the site's data left where it is.
 
-**The command**: download the setup from the release on GitHub (`GEA-Program-Setup-0.75.0.exe` for this version) and run it. It installs for you alone, under `%LOCALAPPDATA%\Programs\GEA-Program`, and asks for the site workspace - the folder that holds the wells, reports, records, accounts and keys. An existing one such as `C:\site` is used exactly as it is, its name included; for a new one (by default `%LOCALAPPDATA%\GEA-Program\site`) it also asks the site's name, which heads every report, and makes the workspace with it (left empty, the workspace is named after its folder; an administrator renames the site in Administration's site settings). Then the Start menu's **GEA-Program** (and the desktop shortcut) starts the control panel when it is not running and opens it in a window of its own. A newer setup installs over the older one: it stops the control panel, replaces the program, keeps the workspace and the choices made before. For a site's software deployment: `GEA-Program-Setup-0.75.0.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"` (`/SITENAME` names a workspace the setup makes; one that exists keeps its own name). From a terminal: `gea launch` does what the shortcut does, `gea launch --selftest` says what it would do, `gea tray --selftest` checks the icon.
+**The command**: download the setup from the release on GitHub (`GEA-Program-Setup-0.75.1.exe` for this version) and run it. It installs for you alone, under `%LOCALAPPDATA%\Programs\GEA-Program`, and asks for the site workspace - the folder that holds the wells, reports, records, accounts and keys. An existing one such as `C:\site` is used exactly as it is, its name included; for a new one (by default `%LOCALAPPDATA%\GEA-Program\site`) it also asks the site's name, which heads every report, and makes the workspace with it (left empty, the workspace is named after its folder; an administrator renames the site in Administration's site settings). Then the Start menu's **GEA-Program** (and the desktop shortcut) starts the control panel when it is not running and opens it in a window of its own. A newer setup installs over the older one: it stops the control panel, replaces the program, keeps the workspace and the choices made before. For a site's software deployment: `GEA-Program-Setup-0.75.1.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"` (`/SITENAME` names a workspace the setup makes; one that exists keeps its own name). From a terminal: `gea launch` does what the shortcut does, `gea launch --selftest` says what it would do, `gea tray --selftest` checks the icon.
 
 **The window**: Microsoft Edge's app window (`msedge --app=`: the control panel with no tabs and no address bar, its own button on the taskbar, which shows the program's derrick and pins as GEA-Program, not as Edge), with a browser profile of its own (`%LOCALAPPDATA%\GEA-Program\window`, no extensions; the first time, Edge may say it signed that profile in to your Microsoft account - Got it), else Google Chrome's, else a tab in the default browser. Where the browser keeps no cookies (its settings or a policy block them), the sign-in page says so and the control panel holds the sign-in itself, in the window's address, until the window is closed. The control panel itself runs with no window of its own: `gea supervise` keeps it running in the background, starts it again when it asks for a restart, and writes everything it would have shown in a console - the start, the sign-ins, the jobs, a stop and why - to `records\console.log` in the workspace. No PowerShell or console window opens. The kit's `start-dashboard.cmd` still runs it in a console window, for a site that wants to watch it there.
 
@@ -18,7 +18,7 @@
 
 **The number to check**: Add/Remove Programs lists GEA-Program with the version you installed; `gea doctor --workspace C:\site` ends with `nothing blocks serving`; the Start menu's **Verify GEA-Program** runs the acceptance gate from the installation and ends with `[ACCEPTANCE] OK - N checks passed`. The release's build installs, upgrades and uninstalls the setup silently before it is published, with the control panel running, and checks the workspace untouched afterwards.
 
-**Signed**: when the publisher's code-signing certificate is configured for the build, the setup is signed with it (Authenticode, timestamped) and Windows names the publisher; until then it ships unsigned and Windows SmartScreen says "unknown publisher" (More info, then Run anyway). The build's provenance holds either way: `gh attestation verify GEA-Program-Setup-0.75.0.exe -R Daniel8Murphy0007/GEA-Program`. The uninstaller the setup leaves behind is Inno Setup's own and is not signed separately.
+**Signed**: when the publisher's code-signing certificate is configured for the build, the setup is signed with it (Authenticode, timestamped) and Windows names the publisher; until then it ships unsigned and Windows SmartScreen says "unknown publisher" (More info, then Run anyway). The build's provenance holds either way: `gh attestation verify GEA-Program-Setup-0.75.1.exe -R Daniel8Murphy0007/GEA-Program`. The uninstaller the setup leaves behind is Inno Setup's own and is not signed separately.
 
 **What this page will not call a measurement**: the icon's running or stopped is whether the control panel's port answers on this computer, read every three seconds - not whether every patch, job or report behind it is healthy (Home and the Verification page say that).
 

{gea_program-0.75.0 → gea_program-0.75.1}/gea/help/reader.md

@@ -4,7 +4,7 @@
 
 **The command**: Reports tab -> Signed dossiers -> **Download GEA Reader for your clients**, or `gea reader --workspace C:\site --out C:\site\GEA-Reader.html`. Send the file once, by any channel (email, a USB stick, the client's portal); send the site's key fingerprint separately - by phone, email or in the contract - as for any dossier. The client opens GEA-Reader.html, drops a dossier on it (or chooses it), and reads the verdict: **Valid** (signed with the site's key, or with a newer key the site's key handed over to), **Valid, but signed by a key you were not given**, or **Not valid** with the reason. Below the verdict: each check, the signer's fingerprint, the key hand-overs, and every file the dossier holds - a report opens in the page as it was signed, a PDF in the browser's own viewer, a table or a log as text, and any file can be saved. A dossier that lists source records by hash without carrying them lets the client choose their copies and checks each against its hash.
 
-**The program**: for a client who wants it installed, **GEA-Reader-Setup-0.75.0.exe** on the release page installs GEA Reader as a Windows program of its own, for the signed-in user, with no administrator rights and nothing of GEA-Program: GEA Reader in the Start menu and on the desktop with its own icon (a white page with a green seal, on blue) and its own taskbar button, and **Check with GEA Reader** on the right-click menu of .zip files (on Windows 11, under Show more options), which opens the dossier at once. It opens the same page in Microsoft Edge's app window with a browser profile of its own (`%LOCALAPPDATA%\GEA-Reader\window`), so a fingerprint the client saves - **Remember this fingerprint**, with whose it is - stays on that computer, and every later dossier signed with that key reads **Valid** with the name the client gave it. `GEA-Reader-portable-0.75.0.zip` is the same program to unzip and run (`GEA-Reader.cmd`). `python\python.exe -m gea_reader --selftest`, in the installed folder, checks the page, the icon, the taskbar identity and the hand-over of a dossier without opening a window.
+**The program**: for a client who wants it installed, **GEA-Reader-Setup-0.75.1.exe** on the release page installs GEA Reader as a Windows program of its own, for the signed-in user, with no administrator rights and nothing of GEA-Program: GEA Reader in the Start menu and on the desktop with its own icon (a white page with a green seal, on blue) and its own taskbar button, and **Check with GEA Reader** on the right-click menu of .zip files (on Windows 11, under Show more options), which opens the dossier at once. It opens the same page in Microsoft Edge's app window with a browser profile of its own (`%LOCALAPPDATA%\GEA-Reader\window`), so a fingerprint the client saves - **Remember this fingerprint**, with whose it is - stays on that computer, and every later dossier signed with that key reads **Valid** with the name the client gave it. `GEA-Reader-portable-0.75.1.zip` is the same program to unzip and run (`GEA-Reader.cmd`). `python\python.exe -m gea_reader --selftest`, in the installed folder, checks the page, the icon, the taskbar identity and the hand-over of a dossier without opening a window.
 
 **What it writes**: the one file, GEA-Reader.html (about 40 KB): the checks, written in the page's own script - Ed25519 (RFC 8032) in its own arithmetic, SHA-256 from the browser - and, when made from a workspace, the site's name and the fingerprints of every key it has signed with (the current one and each retired one from the key history: public halves only; the signing key never leaves `keys\`). The audit log records each download (`reader.download`) and each `gea reader` (`reader.write`) with the fingerprints the reader carried. The reader page writes nothing on the client's computer but the fingerprints a client saves (in the browser's storage for the page): it reads the zip it is given, in memory, and a saved copy goes where the client's browser saves downloads. The installed program also writes the page it opens to `%LOCALAPPDATA%\GEA-Reader\page` (with the dossier inside it when one was right-clicked; removed ten minutes later) and its right-click entry under the user's own registry keys, removed with the program.
 

{gea_program-0.75.0 → gea_program-0.75.1}/gea/help/recorder.md

@@ -2,7 +2,7 @@
 
 > GEA Recorder is the program on the pad: a Raspberry Pi in a sealed box that records the ground channels (geophones, accelerometers, electrode dipoles) through a 24-bit ADC and the rig's WITS0 feed, every sample on one GPS-disciplined clock, into hourly miniSEED files with a SHA-256 beside each and a manifest, and serves one status page on the pad network. Nothing to type: power it and it records. GEA pulls its files in and makes stations of them.
 
-**The command**: the **Seismic** tab, the card **Field recorder**: the box's address on the pad network (`http://192.168.1.50:8780` - the status page shows the address) or the folder of the USB mirror carried to the office, a station name if the site's is not wanted, then **Pull** (a job). GEA fetches the manifest, downloads every file it does not have, checks each against its SHA-256, and makes or updates two stations: the array of the ground-motion sensors (band 8-80 Hz, the sensors' positions from the box's config) and the electrode station (0.01-5 Hz); each sensor's hours are joined in order into one record, nothing re-sampled or filtered. Pull again later: only the new hours come across, and the stations are updated in place. From a terminal: `gea workspace --path C:\site --action field-pull --box http://192.168.1.50:8780`. On the box: `gea-recorder status`, `gea-recorder selftest`; `sudo sh kiosk.sh` once puts the live view full-screen on a monitor on the box's HDMI port from boot - RECORDING in green or what is wrong in red, the clock, the rig's depth, every channel's last minute and the ground sensors' spectrogram, nothing to press - and the same view is at `/live` on the box's page from any browser on the pad network; `sudo sh install.sh` once, from the release's `GEA-Recorder-0.75.0.tar.gz`; the box's README has the parts list, the wiring and the three chrony lines for the GPS clock.
+**The command**: the **Seismic** tab, the card **Field recorder**: the box's address on the pad network (`http://192.168.1.50:8780` - the status page shows the address) or the folder of the USB mirror carried to the office, a station name if the site's is not wanted, then **Pull** (a job). GEA fetches the manifest, downloads every file it does not have, checks each against its SHA-256, and makes or updates two stations: the array of the ground-motion sensors (band 8-80 Hz, the sensors' positions from the box's config) and the electrode station (0.01-5 Hz); each sensor's hours are joined in order into one record, nothing re-sampled or filtered. Pull again later: only the new hours come across, and the stations are updated in place. From a terminal: `gea workspace --path C:\site --action field-pull --box http://192.168.1.50:8780`. On the box: `gea-recorder status`, `gea-recorder selftest`; `sudo sh kiosk.sh` once puts the live view full-screen on a monitor on the box's HDMI port from boot - RECORDING in green or what is wrong in red, the clock, the rig's depth, every channel's last minute and the ground sensors' spectrogram, nothing to press - and the same view is at `/live` on the box's page from any browser on the pad network; `sudo sh install.sh` once, from the release's `GEA-Recorder-0.75.1.tar.gz`; the box's README has the parts list, the wiring and the three chrony lines for the GPS clock.
 
 **Before there is a Pi**: on the same card, **Start the simulated box**: the recorder's own program runs on this computer with its test signal in place of the ADC (a process of its own, its files under `field\sim-box\` in the workspace, its page on port 8781), **Open its monitor** shows the live screen the attendant will see, **Pull from it** brings its files in as stations, **Stop it** closes every file and lists them. **Open the box's monitor** opens any real box's live screen from its address. The kit and the setup install the recorder's program beside GEA for this; a pip install adds it with `pip install gea-recorder`. **From the office, over the internet**: GEA-VPN (`gea help vpn`, Administration) gives every box a private address the office pulls from (`http://10.77.0.3:8780`) through a tunnel from the pad's cellular modem; the box's zip from that card holds `vpn.sh`, run once on the Pi.
 

{gea_program-0.75.0 → gea_program-0.75.1/gea_program.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: gea-program
-Version: 0.75.0
+Version: 0.75.1
 Summary: GEA-Program: downhole gauge monitoring - canonical measurement records, quality rules, drift evaluation with a re-fit change log, well-test validation, alarm management, model cards, store-and-forward, monthly SLA measurement, FAT/SAT protocols and a dashboard, generated from live objects in the client's reporting outline.
 Author: Daniel T. Murphy
 License: MPL-2.0
@@ -780,7 +780,7 @@ unsigned, the key hand-overs - and shows the reports as they were signed. A
 reader made from the workspace knows the site's key fingerprints, so it
 says whether a dossier is the site's; it allows no network request, and it
 leaves the trusted time-stamp to `verify_dossier.py`. For a client who wants
-it installed, every release also carries `GEA-Reader-Setup-0.75.0.exe`: GEA
+it installed, every release also carries `GEA-Reader-Setup-0.75.1.exe`: GEA
 Reader as a Windows program of its own - its own icon and taskbar button,
 Check with GEA Reader on a dossier's right-click menu, fingerprints the client
 saves kept on that computer, nothing of GEA-Program. `gea help reader`.
@@ -1545,7 +1545,7 @@ attaches the zips to the GitHub release of that tag.
 
 ### The Windows installer
 
-Every release also carries `GEA-Program-Setup-0.75.0.exe` (for 0.75.0): the
+Every release also carries `GEA-Program-Setup-0.75.1.exe` (for 0.75.1): the
 same Windows kit installed like any Windows program, for the signed-in user
 alone and with no administrator rights (`%LOCALAPPDATA%\Programs\GEA-Program`).
 It asks for the site workspace (an existing one such as `C:\site` is used as
@@ -1564,7 +1564,7 @@ it, removes the program and leaves the workspace. Silent, for a site's
 software deployment:
 
 ```
-GEA-Program-Setup-0.75.0.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"
+GEA-Program-Setup-0.75.1.exe /VERYSILENT /SUPPRESSMSGBOXES /NORESTART /WORKSPACE="C:\site" /SITENAME="Pad 3" /TASKS="desktopicon"
 ```
 
 The setup is built by Inno Setup 6 from `tools/installer.iss` in the same

{gea_program-0.75.0 → gea_program-0.75.1}/pyproject.toml

@@ -4,7 +4,7 @@ build-backend = "setuptools.build_meta"
 
 [project]
 name = "gea-program"
-version = "0.75.0"
+version = "0.75.1"
 description = "GEA-Program: downhole gauge monitoring - canonical measurement records, quality rules, drift evaluation with a re-fit change log, well-test validation, alarm management, model cards, store-and-forward, monthly SLA measurement, FAT/SAT protocols and a dashboard, generated from live objects in the client's reporting outline."
 readme = "README.md"
 requires-python = ">=3.10"