gOdoo-cli 0.0.2__tar.gz

godoo_cli-0.0.2/LICENSE

@@ -0,0 +1,165 @@
+GNU LESSER GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+  This version of the GNU Lesser General Public License incorporates
+the terms and conditions of version 3 of the GNU General Public
+License, supplemented by the additional permissions listed below.
+
+  0. Additional Definitions.
+
+  As used herein, "this License" refers to version 3 of the GNU Lesser
+General Public License, and the "GNU GPL" refers to version 3 of the GNU
+General Public License.
+
+  "The Library" refers to a covered work governed by this License,
+other than an Application or a Combined Work as defined below.
+
+  An "Application" is any work that makes use of an interface provided
+by the Library, but which is not otherwise based on the Library.
+Defining a subclass of a class defined by the Library is deemed a mode
+of using an interface provided by the Library.
+
+  A "Combined Work" is a work produced by combining or linking an
+Application with the Library.  The particular version of the Library
+with which the Combined Work was made is also called the "Linked
+Version".
+
+  The "Minimal Corresponding Source" for a Combined Work means the
+Corresponding Source for the Combined Work, excluding any source code
+for portions of the Combined Work that, considered in isolation, are
+based on the Application, and not on the Linked Version.
+
+  The "Corresponding Application Code" for a Combined Work means the
+object code and/or source code for the Application, including any data
+and utility programs needed for reproducing the Combined Work from the
+Application, but excluding the System Libraries of the Combined Work.
+
+  1. Exception to Section 3 of the GNU GPL.
+
+  You may convey a covered work under sections 3 and 4 of this License
+without being bound by section 3 of the GNU GPL.
+
+  2. Conveying Modified Versions.
+
+  If you modify a copy of the Library, and, in your modifications, a
+facility refers to a function or data to be supplied by an Application
+that uses the facility (other than as an argument passed when the
+facility is invoked), then you may convey a copy of the modified
+version:
+
+   a) under this License, provided that you make a good faith effort to
+   ensure that, in the event an Application does not supply the
+   function or data, the facility still operates, and performs
+   whatever part of its purpose remains meaningful, or
+
+   b) under the GNU GPL, with none of the additional permissions of
+   this License applicable to that copy.
+
+  3. Object Code Incorporating Material from Library Header Files.
+
+  The object code form of an Application may incorporate material from
+a header file that is part of the Library.  You may convey such object
+code under terms of your choice, provided that, if the incorporated
+material is not limited to numerical parameters, data structure
+layouts and accessors, or small macros, inline functions and templates
+(ten or fewer lines in length), you do both of the following:
+
+   a) Give prominent notice with each copy of the object code that the
+   Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the object code with a copy of the GNU GPL and this license
+   document.
+
+  4. Combined Works.
+
+  You may convey a Combined Work under terms of your choice that,
+taken together, effectively do not restrict modification of the
+portions of the Library contained in the Combined Work and reverse
+engineering for debugging such modifications, if you also do each of
+the following:
+
+   a) Give prominent notice with each copy of the Combined Work that
+   the Library is used in it and that the Library and its use are
+   covered by this License.
+
+   b) Accompany the Combined Work with a copy of the GNU GPL and this license
+   document.
+
+   c) For a Combined Work that displays copyright notices during
+   execution, include the copyright notice for the Library among
+   these notices, as well as a reference directing the user to the
+   copies of the GNU GPL and this license document.
+
+   d) Do one of the following:
+
+       0) Convey the Minimal Corresponding Source under the terms of this
+       License, and the Corresponding Application Code in a form
+       suitable for, and under terms that permit, the user to
+       recombine or relink the Application with a modified version of
+       the Linked Version to produce a modified Combined Work, in the
+       manner specified by section 6 of the GNU GPL for conveying
+       Corresponding Source.
+
+       1) Use a suitable shared library mechanism for linking with the
+       Library.  A suitable mechanism is one that (a) uses at run time
+       a copy of the Library already present on the user's computer
+       system, and (b) will operate properly with a modified version
+       of the Library that is interface-compatible with the Linked
+       Version.
+
+   e) Provide Installation Information, but only if you would otherwise
+   be required to provide such information under section 6 of the
+   GNU GPL, and only to the extent that such information is
+   necessary to install and execute a modified version of the
+   Combined Work produced by recombining or relinking the
+   Application with a modified version of the Linked Version. (If
+   you use option 4d0, the Installation Information must accompany
+   the Minimal Corresponding Source and Corresponding Application
+   Code. If you use option 4d1, you must provide the Installation
+   Information in the manner specified by section 6 of the GNU GPL
+   for conveying Corresponding Source.)
+
+  5. Combined Libraries.
+
+  You may place library facilities that are a work based on the
+Library side by side in a single library together with other library
+facilities that are not Applications and are not covered by this
+License, and convey such a combined library under terms of your
+choice, if you do both of the following:
+
+   a) Accompany the combined library with a copy of the same work based
+   on the Library, uncombined with any other library facilities,
+   conveyed under the terms of this License.
+
+   b) Give prominent notice with the combined library that part of it
+   is a work based on the Library, and explaining where to find the
+   accompanying uncombined form of the same work.
+
+  6. Revised Versions of the GNU Lesser General Public License.
+
+  The Free Software Foundation may publish revised and/or new versions
+of the GNU Lesser General Public License from time to time. Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.
+
+  Each version is given a distinguishing version number. If the
+Library as you received it specifies that a certain numbered version
+of the GNU Lesser General Public License "or any later version"
+applies to it, you have the option of following the terms and
+conditions either of that published version or of any later version
+published by the Free Software Foundation. If the Library as you
+received it does not specify a version number of the GNU Lesser
+General Public License, you may choose any version of the GNU Lesser
+General Public License ever published by the Free Software Foundation.
+
+  If the Library as you received it specifies that a proxy can decide
+whether future versions of the GNU Lesser General Public License shall
+apply, that proxy's public statement of acceptance of any version is
+permanent authorization for you to choose that version for the
+Library.

godoo_cli-0.0.2/PKG-INFO

@@ -0,0 +1,169 @@
+Metadata-Version: 2.1
+Name: godoo-cli
+Version: 0.0.2
+Summary: Wrapper around Odoo-Bin with some convinience RPC functions.
+License: LGPL-3
+Author: Joshua Kreuder
+Author-email: Joshua_Kreuder@outlook.com
+Requires-Python: >=3.8,<3.11
+Classifier: License :: Other/Proprietary License
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3.8
+Classifier: Programming Language :: Python :: 3.9
+Classifier: Programming Language :: Python :: 3.10
+Requires-Dist: gitpython (==3.1.27)
+Requires-Dist: godoo-rpc (==0.0.2)
+Requires-Dist: openupgradelib (==3.3.4)
+Requires-Dist: python-dotenv (==0.20.0)
+Requires-Dist: rich (==12.6.0)
+Requires-Dist: ruamel-yaml (==0.17.21)
+Requires-Dist: typer[all] (>=0.7.0,<0.8.0)
+Description-Content-Type: text/markdown
+
+# gOdoo Dev Environment
+
+![OdooLogo](https://raw.githubusercontent.com/OpenJKSoftware/gOdoo/main/assets/odoo_logo.png)
+![ComposeLogo](https://raw.githubusercontent.com/docker/compose/v2/logo.png)
+
+**gOdoo** is short for **go Odoo**. \
+It is a [Vscode Devcontainer](https://code.visualstudio.com/docs/remote/containers) Environment for [Odoo](https://odoo.com/)
+with Python CLI `godoo` convenience wrapper around `odoo-bin`.
+
+This repository is the base source for the Python package [godoo-cli](https://pypi.org/project/godoo-cli/) and serves as
+an all batteries included development environment.
+
+Made Possible by: [WEMPE Elektronic GmbH](https://wetech.de)
+
+# gOdoo-cli
+
+Python package that provides `godoo` command line interface around `odoo-bin`.
+
+It's build with [Typer](https://github.com/tiangolo/typer) to provide some convenience Wrappers for Odoo development and
+Deployment.
+
+Most flags can be configured by Env variables. \
+Use `godoo --help` to find out more.
+
+# Docker
+
+This workspace also contains Docker and Docker-Compose files. \
+
+They are used to provide either easy Odoo instances where the source is pulled according to
+[odoo_repospec.yml](./odoo_repospec.yml), or as a all batteries included devcontainer for VScode.
+
+## Requirements
+
+- [Docker Compose](https://github.com/docker/compose)
+- [Traefik](https://doc.traefik.io/traefik/) container running with docker provider and "traefik" named docker network.
+  Example: [Traefik Devproxy](https://github.com/joshkreud/traefik_devproxy)
+
+## Just wanna have a quick and easy Odoo Instance?
+
+```bash
+git clone https://github.com/OpenJKSoftware/gOdoo
+cd godoo
+cp .env.sample .env # Change this to your liking or pass the env vars directly to the app container.
+docker-compose build
+docker-compose up
+# wait......
+# wait a bit mode ...
+# just a little bit longer ..
+# There we go.
+# Odoo should be reachable on 'https://godoo.docker.localhost' assuming you didn't change .env TRAEFIK_HOST_RULE or COMPOSE_PROJECT_NAME
+```
+
+# Devcontainer
+
+## Features
+
+- All batteries included [Devcontainer](https://code.visualstudio.com/docs/remote/containers) with postgres service
+  Container and local DNS resolvig managed by [Traefik](https://doc.traefik.io/traefik/).
+- Easy fully working Odoo instance by `docker-compose up` with https access.
+- `godoo` CLI wrapper around Odoo. (Most flags can be configured by Environment Variables and are already preconfigured
+  in the Containers. See [.env.sample](./.env.sample))
+- `odoo-bin` is added to PATH and can thus be invoked from every folder.
+- Odoo will run in Proxy_Mode behind a Traefik reverse proxy for easy access on
+  `https://$COMPOSE_PROJECT_NAME.docker.localhost`
+- [Odoo Pylint plugin](https://github.com/OCA/pylint-odoo) preconfigured in vscode
+- Preinstalled vscode Extensions Highlights:
+  - [SQL Tools](https://marketplace.visualstudio.com/items?itemName=mtxr.sqltools) with preconfigured connection for
+    easy Database access in the Sidebar.
+  - [Docker Extension](https://marketplace.visualstudio.com/items?itemName=ms-azuretools.vscode-docker) controls
+    container host.
+  - [Odoo Snippets](https://marketplace.visualstudio.com/items?itemName=mstuttgart.odoo-snippets)
+  - [Odoo Developments](https://marketplace.visualstudio.com/items?itemName=scapigliato.vsc-odoo-development) can Grab
+    Odoo Model information from a running Server
+  - [Todo Tree](https://marketplace.visualstudio.com/items?itemName=Gruntfuggly.todo-tree)
+
+## Usage
+
+1. For Docker on windows: Clone the repo into the WSL2 Filesystem for better IO performance
+2. Have [Traefik](https://github.com/traefik/traefik) Running on `docker.localhost`
+   [Example](https://github.com/joshkreud/traefik_devproxy) \
+   There must be a Docker network called `traefik` that can reach traefik.
+3. Create `.env` file (see [.env.sample](.env.sample))
+4. Open Devcontianer:
+   - If you have the Devcontainer CLI: `devcontainer open .`
+   - If not open the workspace in Local Vscode. In the Command pallete search for
+     `Devcontainers: Rebuild and Reopen in container`
+5. From **within the container** start Odoo using one of the following commands:
+   - `make` -> Loads Odoo + Workspace Addons
+   - `make bare` -> Loads Odoo with ony `web` installed.
+   - `make enterprise` -> godoo launch with install script for web_enterprise
+   - The full init script is available via "`godoo`". (See --help for Options)
+6. Open Odoo `https://$COMPOSE_PROJECT_NAME.docker.localhost`\
+   For example `COMPOSE_PROJECT_NAME=godoo` --> [https://godoo.docker.localhost](https://godoo.docker.localhost)
+7. Login with `admin:admin`
+8. Profit!
+
+### Access to Odoo and Thirdparty addon Source
+
+You can access the Odoo source by opening the VsCode workspace [full.code-workspace](full.code-workspace) from within
+the Container. This will open a [Multi-Root Workspace](https://code.visualstudio.com/docs/editor/multi-root-workspaces).
+Really waiting for https://github.com/microsoft/vscode-remote-release/issues/3665 here.
+
+## Reset Devcontainer Data
+
+When you screwed up so bad its time to just start Over godoo has you covered:
+
+### Automatic Reset
+
+There are 3 Options to reset the Dev Env.
+
+1. From **Outside** the Container run `make reset` in the project root to delete docker volumes and restart the
+   container. (Vscode will prompt to reconnect if still open)
+2. From **Outside** the Container run `make reset-hard` in the project root to force rebuild the main Odoo container and
+   then do the same as `make reset`
+3. From **Inside** the Container run `make reset` to drop the DB and delete varlib and the bootstrap flag, which is way
+   quicker than the other options.
+
+### Manual Reset
+
+1. Close vscode
+2. Remove `app` and `db` container from docker.
+3. Remove volumes: `db, odoo_thirdparty, odoo_web, vscode_extensions`
+4. Restart Devcontainer
+
+## Python Debugging
+
+### VsCode Debugging
+
+Debugging doesn't reliably work with
+[Odoo Multiprocess](https://www.odoo.com/documentation/14.0/developer/misc/other/cmdline.html#multiprocessing) mode
+enabled. \
+The container ships with a Vscode Debug profile, that sets `--workers 0` to allow for Debugging Breakpoints. See [.vscode/launch.json](./.vscode/launch.json)
+
+### Interactive Shell
+
+Use `godoo shell` to enter an interactive shell on the Database.
+
+# Odoo Modules
+
+## Third Party Modules (repospec.yml)
+
+The `godoo` bootstrap function, will download some modules using git. \
+Which Repos to download is specified in `odoo_repospec.yml` ([Default](./odoo_repospec.yml)) \
+Not all of the cloned addons are automatically installed. \
+Install them via the Apps Page in Odoo using `godoo rpc modules install` or using `odoo-bin`.\
+Modules downloaded on the Odoo Marketplace can be dropped as a `.zip` archive in [./thirdparty](./thirdparty)
+

godoo_cli-0.0.2/README.md

@@ -0,0 +1,146 @@
+# gOdoo Dev Environment
+
+![OdooLogo](https://raw.githubusercontent.com/OpenJKSoftware/gOdoo/main/assets/odoo_logo.png)
+![ComposeLogo](https://raw.githubusercontent.com/docker/compose/v2/logo.png)
+
+**gOdoo** is short for **go Odoo**. \
+It is a [Vscode Devcontainer](https://code.visualstudio.com/docs/remote/containers) Environment for [Odoo](https://odoo.com/)
+with Python CLI `godoo` convenience wrapper around `odoo-bin`.
+
+This repository is the base source for the Python package [godoo-cli](https://pypi.org/project/godoo-cli/) and serves as
+an all batteries included development environment.
+
+Made Possible by: [WEMPE Elektronic GmbH](https://wetech.de)
+
+# gOdoo-cli
+
+Python package that provides `godoo` command line interface around `odoo-bin`.
+
+It's build with [Typer](https://github.com/tiangolo/typer) to provide some convenience Wrappers for Odoo development and
+Deployment.
+
+Most flags can be configured by Env variables. \
+Use `godoo --help` to find out more.
+
+# Docker
+
+This workspace also contains Docker and Docker-Compose files. \
+
+They are used to provide either easy Odoo instances where the source is pulled according to
+[odoo_repospec.yml](./odoo_repospec.yml), or as a all batteries included devcontainer for VScode.
+
+## Requirements
+
+- [Docker Compose](https://github.com/docker/compose)
+- [Traefik](https://doc.traefik.io/traefik/) container running with docker provider and "traefik" named docker network.
+  Example: [Traefik Devproxy](https://github.com/joshkreud/traefik_devproxy)
+
+## Just wanna have a quick and easy Odoo Instance?
+
+```bash
+git clone https://github.com/OpenJKSoftware/gOdoo
+cd godoo
+cp .env.sample .env # Change this to your liking or pass the env vars directly to the app container.
+docker-compose build
+docker-compose up
+# wait......
+# wait a bit mode ...
+# just a little bit longer ..
+# There we go.
+# Odoo should be reachable on 'https://godoo.docker.localhost' assuming you didn't change .env TRAEFIK_HOST_RULE or COMPOSE_PROJECT_NAME
+```
+
+# Devcontainer
+
+## Features
+
+- All batteries included [Devcontainer](https://code.visualstudio.com/docs/remote/containers) with postgres service
+  Container and local DNS resolvig managed by [Traefik](https://doc.traefik.io/traefik/).
+- Easy fully working Odoo instance by `docker-compose up` with https access.
+- `godoo` CLI wrapper around Odoo. (Most flags can be configured by Environment Variables and are already preconfigured
+  in the Containers. See [.env.sample](./.env.sample))
+- `odoo-bin` is added to PATH and can thus be invoked from every folder.
+- Odoo will run in Proxy_Mode behind a Traefik reverse proxy for easy access on
+  `https://$COMPOSE_PROJECT_NAME.docker.localhost`
+- [Odoo Pylint plugin](https://github.com/OCA/pylint-odoo) preconfigured in vscode
+- Preinstalled vscode Extensions Highlights:
+  - [SQL Tools](https://marketplace.visualstudio.com/items?itemName=mtxr.sqltools) with preconfigured connection for
+    easy Database access in the Sidebar.
+  - [Docker Extension](https://marketplace.visualstudio.com/items?itemName=ms-azuretools.vscode-docker) controls
+    container host.
+  - [Odoo Snippets](https://marketplace.visualstudio.com/items?itemName=mstuttgart.odoo-snippets)
+  - [Odoo Developments](https://marketplace.visualstudio.com/items?itemName=scapigliato.vsc-odoo-development) can Grab
+    Odoo Model information from a running Server
+  - [Todo Tree](https://marketplace.visualstudio.com/items?itemName=Gruntfuggly.todo-tree)
+
+## Usage
+
+1. For Docker on windows: Clone the repo into the WSL2 Filesystem for better IO performance
+2. Have [Traefik](https://github.com/traefik/traefik) Running on `docker.localhost`
+   [Example](https://github.com/joshkreud/traefik_devproxy) \
+   There must be a Docker network called `traefik` that can reach traefik.
+3. Create `.env` file (see [.env.sample](.env.sample))
+4. Open Devcontianer:
+   - If you have the Devcontainer CLI: `devcontainer open .`
+   - If not open the workspace in Local Vscode. In the Command pallete search for
+     `Devcontainers: Rebuild and Reopen in container`
+5. From **within the container** start Odoo using one of the following commands:
+   - `make` -> Loads Odoo + Workspace Addons
+   - `make bare` -> Loads Odoo with ony `web` installed.
+   - `make enterprise` -> godoo launch with install script for web_enterprise
+   - The full init script is available via "`godoo`". (See --help for Options)
+6. Open Odoo `https://$COMPOSE_PROJECT_NAME.docker.localhost`\
+   For example `COMPOSE_PROJECT_NAME=godoo` --> [https://godoo.docker.localhost](https://godoo.docker.localhost)
+7. Login with `admin:admin`
+8. Profit!
+
+### Access to Odoo and Thirdparty addon Source
+
+You can access the Odoo source by opening the VsCode workspace [full.code-workspace](full.code-workspace) from within
+the Container. This will open a [Multi-Root Workspace](https://code.visualstudio.com/docs/editor/multi-root-workspaces).
+Really waiting for https://github.com/microsoft/vscode-remote-release/issues/3665 here.
+
+## Reset Devcontainer Data
+
+When you screwed up so bad its time to just start Over godoo has you covered:
+
+### Automatic Reset
+
+There are 3 Options to reset the Dev Env.
+
+1. From **Outside** the Container run `make reset` in the project root to delete docker volumes and restart the
+   container. (Vscode will prompt to reconnect if still open)
+2. From **Outside** the Container run `make reset-hard` in the project root to force rebuild the main Odoo container and
+   then do the same as `make reset`
+3. From **Inside** the Container run `make reset` to drop the DB and delete varlib and the bootstrap flag, which is way
+   quicker than the other options.
+
+### Manual Reset
+
+1. Close vscode
+2. Remove `app` and `db` container from docker.
+3. Remove volumes: `db, odoo_thirdparty, odoo_web, vscode_extensions`
+4. Restart Devcontainer
+
+## Python Debugging
+
+### VsCode Debugging
+
+Debugging doesn't reliably work with
+[Odoo Multiprocess](https://www.odoo.com/documentation/14.0/developer/misc/other/cmdline.html#multiprocessing) mode
+enabled. \
+The container ships with a Vscode Debug profile, that sets `--workers 0` to allow for Debugging Breakpoints. See [.vscode/launch.json](./.vscode/launch.json)
+
+### Interactive Shell
+
+Use `godoo shell` to enter an interactive shell on the Database.
+
+# Odoo Modules
+
+## Third Party Modules (repospec.yml)
+
+The `godoo` bootstrap function, will download some modules using git. \
+Which Repos to download is specified in `odoo_repospec.yml` ([Default](./odoo_repospec.yml)) \
+Not all of the cloned addons are automatically installed. \
+Install them via the Apps Page in Odoo using `godoo rpc modules install` or using `odoo-bin`.\
+Modules downloaded on the Odoo Marketplace can be dropped as a `.zip` archive in [./thirdparty](./thirdparty)

godoo_cli-0.0.2/pyproject.toml

@@ -0,0 +1,149 @@
+[tool.poetry]
+name = "gOdoo-cli"
+version = "0.0.2"
+description = "Wrapper around Odoo-Bin with some convinience RPC functions."
+authors = ["Joshua Kreuder <Joshua_Kreuder@outlook.com>"]
+license = "LGPL-3"
+readme = "README.md"
+packages = [{include = "godoo_cli" , from = "src"}]
+
+[tool.poetry.scripts]
+godoo = "src.godoo_cli:launch_cli"
+
+[tool.poetry.dependencies]
+python = ">=3.8,<3.11"
+python-dotenv = "0.20.0"
+ruamel-yaml = "0.17.21"
+typer = {extras = ["all"], version = "^0.7.0"}
+gitpython = "3.1.27"
+rich = "12.6.0"
+godoo-rpc = "0.0.2"
+openupgradelib = "3.3.4"
+
+[tool.poetry.group.dev.dependencies]
+pylint-odoo = "8.0.16"
+inotify = "0.2.10"
+ipdb = "0.13.9"
+debugpy = "1.6.0"
+black = "22.10.0"
+isort = "5.10.1"
+pre-commit = "2.20.0"
+watchdog = "2.1.7"
+py-spy = "0.3.11"
+rope = "0.23.0"
+flake8 = "5.0.4"
+
+[build-system]
+requires = ["poetry-core>=1.0.0"]
+build-backend = "poetry.core.masonry.api"
+
+[tool.black]
+line-length = 120
+
+[tool.isort]
+profile="black"
+multi_line_output=3
+include_trailing_comma=true
+force_grid_wrap=0
+combine_as_imports=true
+use_parentheses=true
+line_length=120
+known_odoo="odoo"
+known_odoo_addons="odoo.addons"
+sections="FUTURE,STDLIB,THIRDPARTY,ODOO,ODOO_ADDONS,FIRSTPARTY,LOCALFOLDER"
+default_section="THIRDPARTY"
+ensure_newline_before_comments=true
+
+[tool.pylint.format]
+max-line-length=120
+
+[tool.pylint.master]
+init-hook='import sys; sys.path.append("/odoo/odoo")'
+load-plugins="pylint_odoo"
+score="n"
+
+[tool.pylint.odoolint]
+readme-template-url="https://github.com/OCA/maintainer-tools/blob/master/template/module/README.rst"
+manifest-required-authors="Joshua Kreuder <Joshua_Kreuder@outlook.com>"
+manifest-required-keys="license"
+manifest-deprecated-keys="active"
+license-allowed="AGPL-3,GPL-2,GPL-2 or any later version,GPL-3,GPL-3 or any later version,LGPL-3,Other proprietary"
+valid-odoo-versions="16.0"
+
+[tool.pylint.'MESSAGES CONTROL']
+disable="all"
+
+enable=[
+    "anomalous-backslash-in-string",
+    "api-one-deprecated",
+    "api-one-multi-together",
+    "assignment-from-none",
+    "attribute-deprecated",
+    "class-camelcase",
+    "dangerous-default-value",
+    "dangerous-view-replace-wo-priority",
+    "development-status-allowed",
+    "duplicate-id-csv",
+    "duplicate-key",
+    "duplicate-xml-fields",
+    "duplicate-xml-record-id",
+    "eval-referenced",
+    "eval-used",
+    "incoherent-interpreter-exec-perm",
+    "license-allowed",
+    "manifest-author-string",
+    "manifest-deprecated-key",
+    "manifest-required-author",
+    "manifest-required-key",
+    "manifest-version-format",
+    "method-compute",
+    "method-inverse",
+    "method-required-super",
+    "method-search",
+    "openerp-exception-warning",
+    "pointless-statement",
+    "pointless-string-statement",
+    "print-used",
+    "redundant-keyword-arg",
+    "redundant-modulename-xml",
+    "reimported",
+    "relative-import",
+    "return-in-init",
+    "rst-syntax-error",
+    "sql-injection",
+    "too-few-format-args",
+    "translation-field",
+    "translation-required",
+    "unreachable",
+    "use-vim-comment",
+    "wrong-tabs-instead-of-spaces",
+    "xml-syntax-error",
+    # messages that do not cause the lint step to fail
+    "consider-merging-classes-inherited",
+    "create-user-wo-reset-password",
+    "dangerous-filter-wo-user",
+    "deprecated-module",
+    "file-not-used",
+    "invalid-commit",
+    "missing-manifest-dependency",
+    "missing-newline-extrafiles",
+    # missing-readme",
+    "no-utf8-coding-comment",
+    "odoo-addons-relative-import",
+    "old-api7-method-defined",
+    "redefined-builtin",
+    "too-complex",
+    "unnecessary-utf8-coding-comment",
+    "unidiomatic-typecheck",
+    "unsubscriptable-object",
+    "missing-return",
+    # "use-a-generator",
+    "no-else-raise",
+    "useless-return"
+    ]
+
+
+[tool.pylint.reports]
+msg-template="{path}:{line}: [{msg_id}({symbol}), {obj}] {msg}"
+output-format="colorized"
+reports="no"