forgekernel 0.8.0__tar.gz → 0.9.0__tar.gz

{forgekernel-0.8.0/src/forgekernel.egg-info → forgekernel-0.9.0}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: forgekernel
-Version: 0.8.0
+Version: 0.9.0
 Summary: Exact-arithmetic B-rep CAD kernel
 Author-email: Dan Willis <danielcwillis@gmail.com>
 Maintainer-email: Dan Willis <danielcwillis@gmail.com>

{forgekernel-0.8.0 → forgekernel-0.9.0}/src/forgekernel/__init__.py

@@ -4,4 +4,4 @@ Exact rational arithmetic for every topological decision; approximation
 only with tracked error bounds. See README for the three-oracle chain.
 """
 
-__version__ = "0.8.0"
+__version__ = "0.9.0"

forgekernel-0.9.0/src/forgekernel/hlr.py

@@ -0,0 +1,571 @@
+"""Native hidden-line removal for 2D orthographic drawings (ADR-0020).
+
+Visibility is a *display* property, not a topological decision, so — under the
+exactness charter (ADR-0019) — this layer may use floats; the geometry it draws
+is the exact solid. For a view direction it returns two lists of 2D polylines,
+``visible`` and ``hidden``, in the sheet frame the drawing engine consumes:
+the x-axis is ``xdir``, the y-axis is ``direction × xdir``, the viewer looks
+along +``direction`` (so smaller ``dot(P, direction)`` is closer to the viewer).
+
+Approach: extract the solid's real edges (exact straight edges for planar
+solids; sampled circles + silhouettes for cylinders; sharp + silhouette edges
+from the tessellation for everything else), project them, then split each into
+visible/hidden spans by asking, at sample midpoints, whether a hair toward the
+viewer lands *inside* the solid (an inside classifier that respects holes).
+"""
+
+from __future__ import annotations
+
+import math
+
+_EPS = 1e-7
+# a fixed, non-axis-aligned ray for inside/parity tests — dodges the coplanar
+# and edge-grazing degeneracies that axis-aligned rays hit on boxy models.
+_RAY = (0.41931, 0.77913, 0.46671)
+
+
+def _f3(v):
+    return (float(v[0]), float(v[1]), float(v[2]))
+
+
+def _sub(a, b):
+    return (a[0] - b[0], a[1] - b[1], a[2] - b[2])
+
+
+def _add(a, b):
+    return (a[0] + b[0], a[1] + b[1], a[2] + b[2])
+
+
+def _mul(a, s):
+    return (a[0] * s, a[1] * s, a[2] * s)
+
+
+def _dot(a, b):
+    return a[0] * b[0] + a[1] * b[1] + a[2] * b[2]
+
+
+def _cross(a, b):
+    return (a[1] * b[2] - a[2] * b[1], a[2] * b[0] - a[0] * b[2],
+            a[0] * b[1] - a[1] * b[0])
+
+
+def _norm(v):
+    m = math.sqrt(_dot(v, v)) or 1.0
+    return (v[0] / m, v[1] / m, v[2] / m)
+
+
+class _View:
+    def __init__(self, direction, xdir):
+        self.look = _norm(_f3(direction))
+        self.right = _norm(_f3(xdir))
+        # sheet-up = direction × xdir (the drawing engine's convention)
+        self.up = _norm(_cross(self.look, self.right))
+
+    def xy(self, p):
+        return (_dot(p, self.right), _dot(p, self.up))
+
+
+# -- inside/occlusion classifiers ---------------------------------------------
+
+def _ray_hits_convex(orig, dirn, poly, n):
+    """t>0 where the ray orig+t·dirn crosses the convex polygon (with plane
+    normal n), or None. Point-in-polygon via consistent edge cross-signs."""
+    denom = _dot(dirn, n)
+    if abs(denom) < 1e-12:
+        return None
+    t = _dot(_sub(poly[0], orig), n) / denom
+    if t <= _EPS:
+        return None
+    h = _add(orig, _mul(dirn, t))
+    m = len(poly)
+    sign = 0
+    for i in range(m):
+        a, b = poly[i], poly[(i + 1) % m]
+        c = _dot(_cross(_sub(b, a), _sub(h, a)), n)
+        if c > 1e-12:
+            s = 1
+        elif c < -1e-12:
+            s = -1
+        else:
+            continue
+        if sign == 0:
+            sign = s
+        elif s != sign:
+            return None
+    return t
+
+
+def _parity_inside(polys_n, q):
+    """Odd crossings of the fixed ray ⇒ q is inside a closed polygon shell."""
+    c = 0
+    for poly, n in polys_n:
+        if _ray_hits_convex(q, _RAY, poly, n) is not None:
+            c += 1
+    return c % 2 == 1
+
+
+def _solid_polys_n(solid):
+    out = []
+    for p in solid.polys:
+        v = [_f3(x) for x in p.verts]
+        out.append((v, _cross(_sub(v[1], v[0]), _sub(v[2], v[0]))))
+    return out
+
+
+def _tri_polys_n(mesh):
+    verts = [tuple(float(c) for c in v) for v in mesh["vertices"]]
+    out = []
+    for i, j, k in mesh["triangles"]:
+        tri = [verts[i], verts[j], verts[k]]
+        out.append((tri, _cross(_sub(tri[1], tri[0]), _sub(tri[2], tri[0]))))
+    return out
+
+
+def _cyl_tuple(c):
+    return (float(c.cx), float(c.cy), float(c.r), float(c.z0), float(c.z1))
+
+
+def _inside_fn(solid):
+    """A callable q(float3) -> bool: is q strictly inside the solid? Composed so
+    holes are respected without triangulating them away."""
+    name = type(solid).__name__
+    if name == "Solid":
+        pn = _solid_polys_n(solid)
+        return lambda q: _parity_inside(pn, q)
+    if name == "DrilledSolid":
+        base_in = _inside_fn(solid.base)
+        bores = [_cyl_tuple(c) for c in solid.bores]
+
+        def inside(q):
+            if not base_in(q):
+                return False
+            x, y, z = q
+            for cx, cy, r, z0, z1 in bores:
+                if z0 - _EPS <= z <= z1 + _EPS and \
+                        (x - cx) ** 2 + (y - cy) ** 2 <= r * r + _EPS:
+                    return False        # in a bore = removed
+            return True
+        return inside
+    if name == "Cyl":
+        cx, cy, r, z0, z1 = _cyl_tuple(solid)
+        return lambda q: (z0 - _EPS <= q[2] <= z1 + _EPS
+                          and (q[0] - cx) ** 2 + (q[1] - cy) ** 2 <= r * r + _EPS)
+    # general: parity against the tessellation
+    try:
+        pn = _tri_polys_n(solid.tessellate())
+        return lambda q: _parity_inside(pn, q)
+    except Exception:                   # noqa: BLE001 - no mesh ⇒ never occlude
+        return lambda q: False
+
+
+# -- edges to draw -------------------------------------------------------------
+
+def _solid_edges(solid):
+    """Exact straight edges of a planar solid, as 3D float segments."""
+    from forgekernel.brep import logical_edges
+
+    out = []
+    for e in logical_edges(solid):
+        d = _f3(e["dir"])
+        pt = _f3(e["point"])
+        dd = _dot(d, d) or 1.0
+        tp = _dot(pt, d)
+        tmin, tmax = float(e["tmin"]), float(e["tmax"])
+        p0 = _add(pt, _mul(d, (tmin - tp) / dd))
+        p1 = _add(pt, _mul(d, (tmax - tp) / dd))
+        out.append([p0, p1])
+    return out
+
+
+def _circle(cx, cy, r, z, segs):
+    return [(cx + r * math.cos(2 * math.pi * k / segs),
+             cy + r * math.sin(2 * math.pi * k / segs), z)
+            for k in range(segs + 1)]
+
+
+def _circle_segs(r, deflection):
+    """Facet count for a circle of radius ``r`` at chord error ``deflection``."""
+    if r <= deflection:
+        return 24
+    return max(24, int(math.ceil(math.pi / math.acos(max(-1.0, 1.0 - deflection / r)))))
+
+
+def _cyl_edges(c, view, deflection):
+    """A z-axis cylinder's drawing edges: the two rim circles plus, when the
+    view is not down the axis, the two silhouette generators."""
+    cx, cy, r, z0, z1 = _cyl_tuple(c)
+    segs = _circle_segs(r, deflection)
+    out = [_circle(cx, cy, r, z0, segs), _circle(cx, cy, r, z1, segs)]
+    lx, ly = view.look[0], view.look[1]           # axis is +z; silhouette needs
+    m = math.hypot(lx, ly)                         # the in-plane look component
+    if m > 1e-6:
+        px, py = -ly / m, lx / m                   # perpendicular to look, in xy
+        for s in (1.0, -1.0):
+            x, y = cx + s * r * px, cy + s * r * py
+            out.append([(x, y, z0), (x, y, z1)])
+    return out
+
+
+def _mesh_edges(solid, view):
+    """Sharp feature edges + view-dependent silhouette edges from a mesh."""
+    try:
+        mesh = solid.tessellate()
+    except Exception:                   # noqa: BLE001
+        return []
+    verts = [tuple(float(c) for c in v) for v in mesh["vertices"]]
+    from collections import defaultdict
+    faces = defaultdict(list)           # undirected edge -> [triangle normals]
+    tri_of = defaultdict(list)          # undirected edge -> [(a,b) as given]
+    for i, j, k in mesh["triangles"]:
+        n = _norm(_cross(_sub(verts[j], verts[i]), _sub(verts[k], verts[i])))
+        for a, b in ((i, j), (j, k), (k, i)):
+            e = (min(a, b), max(a, b))
+            faces[e].append(n)
+            tri_of[e].append((verts[a], verts[b]))
+    out = []
+    for e, normals in faces.items():
+        seg = [verts[e[0]], verts[e[1]]]
+        if len(normals) == 1:
+            out.append(seg)             # boundary edge
+            continue
+        n0, n1 = normals[0], normals[1]
+        if _dot(n0, n1) < 0.985:        # sharp feature edge (~10°)
+            out.append(seg)
+            continue
+        # silhouette: the two faces face opposite ways relative to the viewer
+        f0 = _dot(n0, view.look) < 0
+        f1 = _dot(n1, view.look) < 0
+        if f0 != f1:
+            out.append(seg)
+    return out
+
+
+def _draw_edges(solid, view, deflection):
+    name = type(solid).__name__
+    if name == "Solid":
+        return _solid_edges(solid)
+    if name == "DrilledSolid":
+        segs = _solid_edges(solid.base)
+        for c in solid.bores:
+            segs += _cyl_edges(c, view, deflection)
+        return segs
+    if name == "Cyl":
+        return _cyl_edges(solid, view, deflection)
+    if name == "DisjointUnion":
+        segs = []
+        for m in solid.members:
+            segs += _draw_edges(m, view, deflection)
+        return segs
+    return _mesh_edges(solid, view)
+
+
+# -- main ----------------------------------------------------------------------
+
+def _split_polyline(pts3, view, inside, deflection):
+    """Project a 3D polyline and split it into visible/hidden runs by testing,
+    at each segment's samples, whether a hair toward the viewer is occluded."""
+    toward = _mul(view.look, -1.0)              # from a surface point to viewer
+    vis, hid = [], []
+    for a, b in zip(pts3[:-1], pts3[1:]):
+        seg = _sub(b, a)
+        length = math.sqrt(_dot(seg, seg))
+        nseg = max(1, int(math.ceil(length / max(deflection, 1e-6))))
+        prev_hidden = None
+        run = []
+        for s in range(nseg + 1):
+            t = s / nseg
+            p = _add(a, _mul(seg, t))
+            xy = view.xy(p)
+            if s < nseg:                        # visibility of the sub-segment
+                mid = _add(a, _mul(seg, (s + 0.5) / nseg))
+                h = inside(_add(mid, _mul(toward, 1e-4 * max(1.0, length))))
+            else:
+                h = prev_hidden
+            if prev_hidden is None or h == prev_hidden:
+                run.append(xy)
+            else:
+                (hid if prev_hidden else vis).append(run)
+                run = [run[-1], xy]
+            prev_hidden = h
+        if len(run) >= 2:
+            (hid if prev_hidden else vis).append(run)
+    return vis, hid
+
+
+def hidden_line(solid, direction, xdir, *, deflection=0.05):
+    """Return ``{"visible": [polyline…], "hidden": [polyline…]}`` for the view,
+    each polyline a list of ``(x, y)`` floats in the sheet frame."""
+    view = _View(direction, xdir)
+    inside = _inside_fn(solid)
+    visible, hidden = [], []
+    for edge in _draw_edges(solid, view, deflection):
+        v, h = _split_polyline(edge, view, inside, deflection)
+        visible += [p for p in v if len(p) >= 2]
+        hidden += [p for p in h if len(p) >= 2]
+    return {"visible": visible, "hidden": hidden}
+
+
+# -- section curves (plane ∩ solid boundary) ----------------------------------
+#
+# A section view cuts the solid with a plane and draws the intersection of that
+# plane with the solid's *surface* — the closed loops the section engine chains
+# and hatches. Like HLR this is a display computation (floats legal); the plane
+# and the solid it cuts are exact. The plane is ``{P : dot(P, direction)=offset}``
+# (``direction`` is the view/look axis, so the section lies flat in the sheet).
+
+def _plane_from(direction, offset):
+    """Cut plane as a unit normal + signed distance ``dot(P, n) = d``."""
+    raw = _f3(direction)
+    scale = math.sqrt(_dot(raw, raw)) or 1.0
+    return _norm(raw), float(offset) / scale
+
+
+def _det3(m):
+    return (m[0][0] * (m[1][1] * m[2][2] - m[1][2] * m[2][1])
+            - m[0][1] * (m[1][0] * m[2][2] - m[1][2] * m[2][0])
+            + m[0][2] * (m[1][0] * m[2][1] - m[1][1] * m[2][0]))
+
+
+def _two_plane_point(n1, d1, n2, d2, u):
+    """A point on the line where planes (n1,d1) and (n2,d2) meet; ``u=n1×n2``."""
+    m = [list(n1), list(n2), list(u)]
+    det = _det3(m)
+    if abs(det) < 1e-16:
+        return (0.0, 0.0, 0.0)
+    rhs = (d1, d2, 0.0)
+    out = []
+    for j in range(3):
+        mj = [row[:] for row in m]
+        for i in range(3):
+            mj[i][j] = rhs[i]
+        out.append(_det3(mj) / det)
+    return tuple(out)
+
+
+def _line_in_convex(p0, u, poly, fn):
+    """λ-interval of ``p0+λu`` inside a convex planar polygon (normal ``fn``),
+    found by the two boundary crossings — winding-agnostic."""
+    lambdas = []
+    m = len(poly)
+    for i in range(m):
+        a, b = poly[i], poly[(i + 1) % m]
+        e = _sub(b, a)
+        en = _cross(fn, e)
+        denom = _dot(u, en)
+        if abs(denom) < 1e-15:
+            continue
+        lam = _dot(_sub(a, p0), en) / denom
+        pt = _add(p0, _mul(u, lam))
+        ee = _dot(e, e) or 1.0
+        s = _dot(_sub(pt, a), e) / ee
+        if -1e-9 <= s <= 1 + 1e-9:
+            lambdas.append(lam)
+    if len(lambdas) < 2:
+        return None
+    return (min(lambdas), max(lambdas))
+
+
+def _circle_lambdas(p0, u, c3, r):
+    """λ-interval where ``p0+λu`` lies inside the circle (centre ``c3``, radius
+    ``r``, both in the line's plane), or None."""
+    w = _sub(p0, c3)
+    a = _dot(u, u)
+    b = 2.0 * _dot(w, u)
+    c = _dot(w, w) - r * r
+    disc = b * b - 4 * a * c
+    if disc <= 1e-12 or a < 1e-16:
+        return None
+    sq = math.sqrt(disc)
+    return ((-b - sq) / (2 * a), (-b + sq) / (2 * a))
+
+
+def _subtract(intervals, lo, hi):
+    out = []
+    for a, b in intervals:
+        if hi <= a or lo >= b:
+            out.append((a, b))
+            continue
+        if a < lo:
+            out.append((a, lo))
+        if hi < b:
+            out.append((hi, b))
+    return out
+
+
+def _planar_face_section(poly, fn, nc, dc, bores):
+    """Segments of the cut plane across one planar face, with any bore disks
+    that open onto the face subtracted (so through-holes stay clear)."""
+    u = _cross(nc, fn)
+    if _dot(u, u) < 1e-16:
+        return []                        # face parallel to the cut plane
+    df = _dot(fn, poly[0])
+    p0 = _two_plane_point(nc, dc, fn, df, u)
+    span = _line_in_convex(p0, u, poly, fn)
+    if span is None:
+        return []
+    intervals = [span]
+    nfu = _norm(fn)
+    if abs(nfu[2]) > 0.99:               # a z-cap face — bores open onto it
+        zf = float(poly[0][2])
+        for cx, cy, r, z0, z1 in bores:
+            if abs(zf - z0) < 1e-6 or abs(zf - z1) < 1e-6:
+                hit = _circle_lambdas(p0, u, (cx, cy, zf), r)
+                if hit:
+                    intervals = _subtract(intervals, hit[0], hit[1])
+    segs = []
+    for a, b in intervals:
+        if b - a > 1e-9:
+            segs.append((_add(p0, _mul(u, a)), _add(p0, _mul(u, b))))
+    return segs
+
+
+def _wall_xy(cx, cy, r, nc, dc):
+    """The up-to-two (x, y) where a z-cylinder wall (radius r) meets a cut plane
+    parallel to the axis (nz≈0), or [] if the plane misses it."""
+    nx, ny, _ = nc
+    mag = r * math.hypot(nx, ny)
+    if mag < 1e-12:
+        return []
+    cth = (dc - (nx * cx + ny * cy)) / mag
+    if cth < -1 - 1e-9 or cth > 1 + 1e-9:
+        return []
+    phi = math.atan2(ny, nx)
+    ac = math.acos(max(-1.0, min(1.0, cth)))
+    return [(cx + r * math.cos(t), cy + r * math.sin(t)) for t in {phi + ac, phi - ac}]
+
+
+def _cyl_wall_seg(cx, cy, r, z0, z1, nc, dc, deflection):
+    """Segments where the cut plane crosses a z-cylinder wall over [z0, z1].
+    Two vertical generators when the plane is parallel to the axis; a sampled
+    ellipse/circle otherwise."""
+    nx, ny, nz = nc
+    if abs(nz) < 1e-9:                    # plane parallel to the axis
+        return [((x, y, z0), (x, y, z1)) for (x, y) in _wall_xy(cx, cy, r, nc, dc)]
+    segs = _circle_segs(r, deflection)   # plane crosses the axis: sample θ
+    prev = None
+    out = []
+    for k in range(segs + 1):
+        th = 2 * math.pi * k / segs
+        x, y = cx + r * math.cos(th), cy + r * math.sin(th)
+        z = (dc - nx * x - ny * y) / nz
+        cur = (x, y, z) if z0 - 1e-9 <= z <= z1 + 1e-9 else None
+        if prev is not None and cur is not None:
+            out.append((prev, cur))
+        prev = cur
+    return out
+
+
+def _cyl_wall_section(c, nc, dc, deflection):
+    cx, cy, r, z0, z1 = _cyl_tuple(c)
+    return _cyl_wall_seg(cx, cy, r, z0, z1, nc, dc, deflection)
+
+
+def _bore_bands(group):
+    """Partition a coaxial bore group into z-bands, each tagged with the
+    OUTERMOST radius covering it — the profile of the bores' union. ``group`` is
+    a list of (cx, cy, r, z0, z1) tuples sharing (cx, cy)."""
+    zs = sorted({z for (_, _, _, z0, z1) in group for z in (z0, z1)})
+    bands = []
+    for za, zb in zip(zs, zs[1:]):
+        zmid = (za + zb) / 2
+        rs = [r for (_, _, r, z0, z1) in group if z0 - 1e-9 <= zmid <= z1 + 1e-9]
+        if rs:
+            bands.append((za, zb, max(rs)))
+    return bands
+
+
+def _section_bore_group(group, nc, dc, deflection):
+    """Section a coaxial bore stack (e.g. a counterbore) as ONE stepped-cylinder
+    profile: walls at the outermost radius per z-band, plus shoulder rings where
+    the radius steps (only visible when the plane is parallel to the axis).
+    Sectioning each bore independently would draw the inner wall straight through
+    the empty counterbore cavity and omit the shoulder."""
+    cx, cy = float(group[0][0]), float(group[0][1])
+    bands = _bore_bands(group)
+    out = []
+    for za, zb, r in bands:
+        out += _cyl_wall_seg(cx, cy, r, za, zb, nc, dc, deflection)
+    if abs(nc[2]) < 1e-9:                 # shoulders only cut when plane ∥ axis
+        for (za, zb, r0), (zb2, zc, r1) in zip(bands, bands[1:]):
+            if abs(r0 - r1) < 1e-12:
+                continue
+            lo = _wall_xy(cx, cy, min(r0, r1), nc, dc)
+            hi = _wall_xy(cx, cy, max(r0, r1), nc, dc)
+            for h in hi:                 # connect each outer point to its side's inner
+                if not lo:
+                    continue
+                l = min(lo, key=lambda p: (p[0] - h[0]) ** 2 + (p[1] - h[1]) ** 2)
+                out.append(((l[0], l[1], zb), (h[0], h[1], zb)))
+    return out
+
+
+def _cyl_cap_sections(c, nc, dc):
+    cx, cy, r, z0, z1 = _cyl_tuple(c)
+    out = []
+    for zc in (z0, z1):
+        fn = (0.0, 0.0, 1.0)
+        u = _cross(nc, fn)
+        if _dot(u, u) < 1e-16:
+            continue
+        p0 = _two_plane_point(nc, dc, fn, zc, u)
+        hit = _circle_lambdas(p0, u, (cx, cy, zc), r)
+        if hit:
+            out.append((_add(p0, _mul(u, hit[0])), _add(p0, _mul(u, hit[1]))))
+    return out
+
+
+def _mesh_section(solid, nc, dc):
+    try:
+        mesh = solid.tessellate()
+    except Exception:                    # noqa: BLE001
+        return []
+    verts = [tuple(float(x) for x in v) for v in mesh["vertices"]]
+    out = []
+    for tri in mesh["triangles"]:
+        pts = [verts[i] for i in tri]
+        hits = []
+        for a, b in ((0, 1), (1, 2), (2, 0)):
+            pa, pb = pts[a], pts[b]
+            da, db = _dot(pa, nc) - dc, _dot(pb, nc) - dc
+            if (da <= 0 < db) or (db <= 0 < da):
+                t = da / (da - db)
+                hits.append(_add(pa, _mul(_sub(pb, pa), t)))
+        if len(hits) == 2:
+            out.append((hits[0], hits[1]))
+    return out
+
+
+def _section_segments(solid, nc, dc, deflection):
+    name = type(solid).__name__
+    if name == "Solid":
+        return [s for poly, fn in _solid_polys_n(solid)
+                for s in _planar_face_section(poly, fn, nc, dc, [])]
+    if name == "DrilledSolid":
+        bores = [_cyl_tuple(x) for x in solid.bores]
+        out = [s for poly, fn in _solid_polys_n(solid.base)
+               for s in _planar_face_section(poly, fn, nc, dc, bores)]
+        groups = {}                      # coaxial bores section as one profile
+        for b in bores:
+            groups.setdefault((round(b[0], 9), round(b[1], 9)), []).append(b)
+        for g in groups.values():
+            out += _section_bore_group(g, nc, dc, deflection)
+        return out
+    if name == "Cyl":
+        return (_cyl_wall_section(solid, nc, dc, deflection)
+                + _cyl_cap_sections(solid, nc, dc))
+    if name == "DisjointUnion":
+        out = []
+        for m in solid.members:
+            out += _section_segments(m, nc, dc, deflection)
+        return out
+    return _mesh_section(solid, nc, dc)
+
+
+def section_polys(solid, direction, xdir, offset, *, deflection=0.05):
+    """Cut ``solid`` with the plane ``dot(P, direction)=offset`` and return the
+    section curves as 2D segments ``[[(x,y),(x,y)], …]`` in the same sheet frame
+    ``hidden_line`` uses, so a section view overlays its projection exactly."""
+    view = _View(direction, xdir)
+    nc, dc = _plane_from(direction, offset)
+    return [[view.xy(a), view.xy(b)]
+            for a, b in _section_segments(solid, nc, dc, deflection)]

{forgekernel-0.8.0 → forgekernel-0.9.0/src/forgekernel.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: forgekernel
-Version: 0.8.0
+Version: 0.9.0
 Summary: Exact-arithmetic B-rep CAD kernel
 Author-email: Dan Willis <danielcwillis@gmail.com>
 Maintainer-email: Dan Willis <danielcwillis@gmail.com>

{forgekernel-0.8.0 → forgekernel-0.9.0}/src/forgekernel.egg-info/SOURCES.txt

@@ -7,6 +7,7 @@ src/forgekernel/bsolid.py
 src/forgekernel/csg.py
 src/forgekernel/curve.py
 src/forgekernel/exact.py
+src/forgekernel/hlr.py
 src/forgekernel/interval.py
 src/forgekernel/io.py
 src/forgekernel/kernel.py
@@ -25,6 +26,7 @@ src/forgekernel.egg-info/SOURCES.txt
 src/forgekernel.egg-info/dependency_links.txt
 src/forgekernel.egg-info/requires.txt
 src/forgekernel.egg-info/top_level.txt
+tests/test_hlr.py
 tests/test_k1_exact.py
 tests/test_k37_loft.py
 tests/test_k38_profile.py

forgekernel-0.9.0/tests/test_hlr.py

@@ -0,0 +1,142 @@
+"""Native hidden-line removal (ADR-0020) — visible/hidden 2D polylines per view.
+
+Visibility is a display property (floats legal); these check the projected
+geometry lands where it must and holes/occlusion behave."""
+
+from __future__ import annotations
+
+import math
+
+from forgekernel.brep import Solid
+from forgekernel.hlr import hidden_line, section_polys
+from forgekernel.quadric import Cyl, DrilledSolid
+
+
+def _chain(segs, tol=1e-4):
+    """Chain 2D segments into closed loops (mirrors the drawing engine)."""
+    def key(p):
+        return (round(p[0] / tol), round(p[1] / tol))
+    rem = [list(s) for s in segs if len(s) >= 2]
+    loops = []
+    while rem:
+        loop = rem.pop()
+        while key(loop[0]) != key(loop[-1]):
+            for i, c in enumerate(rem):
+                if key(c[0]) == key(loop[-1]):
+                    loop += c[1:]
+                    rem.pop(i)
+                    break
+                if key(c[-1]) == key(loop[-1]):
+                    loop += list(reversed(c))[1:]
+                    rem.pop(i)
+                    break
+            else:
+                break
+        if key(loop[0]) == key(loop[-1]) and len(loop) >= 4:
+            loops.append(loop)
+    return loops
+
+
+def _bbox2d(polys):
+    xs = [p[0] for pl in polys for p in pl]
+    ys = [p[1] for pl in polys for p in pl]
+    return min(xs), max(xs), min(ys), max(ys)
+
+
+def test_box_front_and_top_project_to_the_right_rectangle() -> None:
+    box = Solid.box(20, 10, 5)
+    front = hidden_line(box, (0, -1, 0), (1, 0, 0))     # sheet x=X, y=Z
+    x0, x1, y0, y1 = _bbox2d(front["visible"])
+    assert (round(x0), round(x1), round(y0), round(y1)) == (0, 20, 0, 5)
+    top = hidden_line(box, (0, 0, 1), (1, 0, 0))        # sheet x=X, y=Y
+    x0, x1, y0, y1 = _bbox2d(top["visible"])
+    assert (round(x0), round(x1), round(y0), round(y1)) == (0, 20, 0, 10)
+
+
+def test_box_back_edges_are_hidden_not_visible() -> None:
+    # a solid box has no hidden geometry that isn't coincident with an outline;
+    # but every projected outline is present and closed (>= 4 visible runs)
+    box = Solid.box(8, 8, 8)
+    r = hidden_line(box, (0, -1, 0), (1, 0, 0))
+    assert len(r["visible"]) >= 4
+
+
+def test_drilled_plate_shows_the_hole_and_hides_the_bore_wall() -> None:
+    # 40x20x5 plate, Ø8 through-hole at (20,10)
+    plate = DrilledSolid(Solid.box(40, 20, 5),
+                         [Cyl(20, 10, 4, 0, 5)])
+    top = hidden_line(plate, (0, 0, 1), (1, 0, 0))      # looking down the bore
+    # the rim circle appears near (20,10) with radius ~4
+    pts = [p for pl in top["visible"] for p in pl]
+    near = [p for p in pts if abs(math.hypot(p[0] - 20, p[1] - 10) - 4) < 0.6]
+    assert near, "hole rim circle should be visible in the top view"
+    # front view: the bore is behind the front face -> its wall runs are hidden
+    front = hidden_line(plate, (0, -1, 0), (1, 0, 0))
+    assert front["hidden"], "bore walls should be hidden in the front view"
+
+
+def test_deflection_controls_circle_fidelity() -> None:
+    plate = DrilledSolid(Solid.box(30, 30, 4), [Cyl(15, 15, 6, 0, 4)])
+    coarse = hidden_line(plate, (0, 0, 1), (1, 0, 0), deflection=0.5)
+    fine = hidden_line(plate, (0, 0, 1), (1, 0, 0), deflection=0.05)
+    n_coarse = sum(len(pl) for pl in coarse["visible"])
+    n_fine = sum(len(pl) for pl in fine["visible"])
+    assert n_fine > n_coarse
+
+
+# -- section curves -----------------------------------------------------------
+
+def test_section_of_box_is_the_cut_rectangle() -> None:
+    box = Solid.box(20, 10, 10)
+    segs = section_polys(box, (1, 0, 0), (0, 1, 0), 10.0)  # plane x=10
+    loops = _chain(segs)
+    assert len(loops) == 1
+    xs = [p[0] for lp in loops for p in lp]
+    ys = [p[1] for lp in loops for p in lp]
+    assert (round(min(xs)), round(max(xs))) == (0, 10)     # sheet x = Y
+    assert (round(min(ys)), round(max(ys))) == (0, 10)     # sheet y = Z
+
+
+def test_section_through_drilled_hole_splits_into_two_loops() -> None:
+    # box 20x10x10, Ø4 through-hole at (10,5); section on the hole axis (x=10)
+    # is the material on either side of the slot: exactly two closed loops.
+    plate = DrilledSolid(Solid.box(20, 10, 10), [Cyl(10, 5, 2, 0, 10)])
+    segs = section_polys(plate, (1, 0, 0), (0, 1, 0), 10.0)
+    loops = _chain(segs)
+    assert len(loops) == 2
+    spans = sorted((round(min(p[0] for p in lp)), round(max(p[0] for p in lp)))
+                   for lp in loops)
+    assert spans == [(0, 3), (7, 10)]      # slot clears Y∈(3,7)
+
+
+def test_counterbore_sections_as_one_stepped_profile() -> None:
+    # coaxial bores (r2 through + r4 counterbore over z7..10) must section as a
+    # single stepped profile: two closed loops with the shoulder step, NOT the
+    # inner wall drawn straight through the empty counterbore cavity.
+    cbore = DrilledSolid(Solid.box(20, 20, 10),
+                         [Cyl(10, 10, 2, 0, 10), Cyl(10, 10, 4, 7, 10)])
+    side = _chain(section_polys(cbore, (0, 1, 0), (1, 0, 0), 10.0))
+    assert len(side) == 2                      # material either side of the bore
+    # each loop steps in at the shoulder: both the r2 wall (x=8/12) and the r4
+    # wall (x=6/14) appear, so the x-extent per loop is 8 (0..8), not 6.
+    left = min(side, key=lambda lp: min(p[0] for p in lp))
+    xs = sorted({round(p[0], 3) for p in left})
+    assert 6.0 in xs and 8.0 in xs             # both radii present -> stepped
+    # a plane normal to the bore, inside the counterbore band, shows ONLY the
+    # outer (r4) circle — no phantom inner r2 circle.
+    top = section_polys(cbore, (0, 0, 1), (1, 0, 0), 8.5)
+    radii = [round(math.hypot(p[0] - 10, p[1] - 10), 2)
+             for pl in top for p in pl if math.hypot(p[0] - 10, p[1] - 10) < 6]
+    assert radii and all(abs(r - 4.0) < 0.3 for r in radii)
+
+
+def test_section_normal_to_bore_shows_the_hole_circle() -> None:
+    # a plane perpendicular to the bore axis cuts the wall as a full circle:
+    # outer rectangle + inner circle = two loops (the hole stays clear).
+    plate = DrilledSolid(Solid.box(20, 20, 10), [Cyl(10, 10, 3, 0, 10)])
+    segs = section_polys(plate, (0, 0, 1), (1, 0, 0), 5.0)  # plane z=5
+    loops = _chain(segs)
+    assert len(loops) == 2
+    inner = min(loops, key=lambda lp: max(p[0] for p in lp) - min(p[0] for p in lp))
+    r = (max(p[0] for p in inner) - min(p[0] for p in inner)) / 2
+    assert abs(r - 3.0) < 0.2              # the bore radius, within faceting