firestarter 3.2.4__tar.gz → 3.2.5__tar.gz

{firestarter-3.2.4/firestarter.egg-info → firestarter-3.2.5}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: firestarter
-Version: 3.2.4
+Version: 3.2.5
 Summary: EPROM programmer software for the Relatively Universal ROM Programmer
 Author-email: Henrik Olsson <henols@gmail.com>
 Project-URL: Homepage, https://github.com/henols/firestarter_app

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/_version.py

@@ -18,7 +18,7 @@ version_tuple: tuple[int | str, ...]
 commit_id: str | None
 __commit_id__: str | None
 
-__version__ = version = '3.2.4'
-__version_tuple__ = version_tuple = (3, 2, 4)
+__version__ = version = '3.2.5'
+__version_tuple__ = version_tuple = (3, 2, 5)
 
-__commit_id__ = commit_id = 'g3023daa'
+__commit_id__ = commit_id = 'g75046d7'

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/chip_resolver.py

@@ -9,7 +9,7 @@ Single chokepoint between CLI dispatch and the EPROM database lookup/conversion.
 
 from typing import Any
 
-from firestarter.database import EpromDatabase
+from firestarter.database import ROM_CE, ROM_OE, EpromDatabase
 from firestarter.exceptions import (
     AmbiguousChipNameError,
     ChipNotFoundError,
@@ -133,6 +133,15 @@ def resolve_chip(name: str, db: EpromDatabase | None = None) -> dict[str, Any]:
     # A pin map with fewer address lines than the chip's size needs would
     # repeat one window of the chip across the whole operation, silently.
     bus = data.get("bus-config", {}).get("bus")
+    # The shield wires one socket pin to its CE driver and one to its OE
+    # driver. get_bus_config gives an address pin there the ROM_CE / ROM_OE
+    # sentinel, which is not a bus line the firmware can drive.
+    if bus and {ROM_CE, ROM_OE} & set(bus):
+        raise ChipNotImplementedError(
+            f"{name}: its pin map puts an address line on a socket pin that the "
+            "shield drives as CE or OE. The programmer cannot drive that "
+            "address line."
+        )
     if bus and data["memory-size"] > 1 << len(bus):
         raise ChipNotImplementedError(
             f"{name}: its pin map has {len(bus)} address lines, which reach "

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/data/chip_database.json

@@ -1710,7 +1710,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "protocol-not-implemented",
+      "unsupported_reason": "protocol not implemented: pin map DIP28_27011 gives 14 address lines, which reach 16384 of the chip's 131072 bytes. The programmer implements no way to reach the rest."
     },
     {
       "electrical": {
@@ -5989,7 +5990,7 @@
         "vpp_mv": 12500
       },
       "part_number": "MBM27C1000P,MBM27C1000",
-      "pinout": "DIP32_27C020",
+      "pinout": "DIP32_27C301",
       "programming": {
         "algorithm": 8,
         "chip_id_check": true,
@@ -5999,7 +6000,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 500
       },
-      "support_status": "supported"
+      "support_status": "adapter-required",
+      "unsupported_reason": "adapter required: the shield drives chip pin 22 as CE and pin 24 as OE, but pin map DIP32_27C301 needs other functions on pins [2, 24]. An adapter must move those pins."
     },
     {
       "electrical": {
@@ -6058,7 +6060,7 @@
         "vpp_mv": 12500
       },
       "part_number": "MBM27C2000P,MBM27C2000",
-      "pinout": "DIP32_27C020",
+      "pinout": "DIP32_27C301",
       "programming": {
         "algorithm": 8,
         "chip_id_check": true,
@@ -6068,7 +6070,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "adapter-required",
+      "unsupported_reason": "adapter required: the shield drives chip pin 22 as CE and pin 24 as OE, but pin map DIP32_27C301 needs other functions on pins [2, 24]. An adapter must move those pins."
     },
     {
       "electrical": {
@@ -6464,7 +6467,7 @@
         "vpp_mv": 12500
       },
       "part_number": "HN27C301AG,HN27C301AP,HN27C301AFP",
-      "pinout": "DIP32_27C020",
+      "pinout": "DIP32_27C301",
       "programming": {
         "algorithm": 8,
         "chip_id_check": true,
@@ -6474,7 +6477,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "adapter-required",
+      "unsupported_reason": "adapter required: the shield drives chip pin 22 as CE and pin 24 as OE, but pin map DIP32_27C301 needs other functions on pins [2, 24]. An adapter must move those pins."
     },
     {
       "electrical": {
@@ -6486,7 +6490,7 @@
         "vpp_mv": 12500
       },
       "part_number": "HN27C301G",
-      "pinout": "DIP32_27C020",
+      "pinout": "DIP32_27C301",
       "programming": {
         "algorithm": 8,
         "chip_id_check": false,
@@ -6496,7 +6500,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "adapter-required",
+      "unsupported_reason": "adapter required: the shield drives chip pin 22 as CE and pin 24 as OE, but pin map DIP32_27C301 needs other functions on pins [2, 24]. An adapter must move those pins."
     },
     {
       "electrical": {
@@ -7407,7 +7412,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "protocol-not-implemented",
+      "unsupported_reason": "protocol not implemented: pin map DIP28_27011 gives 14 address lines, which reach 16384 of the chip's 131072 bytes. The programmer implements no way to reach the rest."
     },
     {
       "electrical": {
@@ -7429,7 +7435,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "protocol-not-implemented",
+      "unsupported_reason": "protocol not implemented: pin map DIP28_27011 gives 14 address lines, which reach 16384 of the chip's 131072 bytes. The programmer implements no way to reach the rest."
     },
     {
       "electrical": {
@@ -11966,7 +11973,7 @@
         "vpp_mv": 13000
       },
       "part_number": "M27C1000",
-      "pinout": "DIP32_27C020",
+      "pinout": "DIP32_27C301",
       "programming": {
         "algorithm": 8,
         "chip_id_check": true,
@@ -11976,7 +11983,8 @@
         "protect_on_after": false,
         "pulse_duration_us": 100
       },
-      "support_status": "supported"
+      "support_status": "adapter-required",
+      "unsupported_reason": "adapter required: the shield drives chip pin 22 as CE and pin 24 as OE, but pin map DIP32_27C301 needs other functions on pins [2, 24]. An adapter must move those pins."
     },
     {
       "electrical": {
@@ -15655,8 +15663,9 @@
       },
       "provenance": "VAR-05 / D-10 \u2014 TI 2532 is a physically real 4KB 24-pin UV-EPROM with a NON-JEDEC pinout (2532 != JEDEC 2732); absent from minipro infoic.xml. The 2516_EPROM.pdf is the TI 2500-series UV-EPROM family datasheet covering the 2516/2532 lineage; VPP=pin 21 / A11=pin 18 / !PD-PGM=pin 20 distinguishes the 2532 from the DIP24_2732 layout. Modeled by the new DIP24_2532 pinout entry. Carries the same UNVERIFIED posture as the 2516 row (no on-hand bench proof).",
       "source": "non-upstream-supplement",
-      "support_status": "supported",
-      "verification_note": "SAFE-04 / D-11: resolvable for read/info but NOT write-graduated \u2014 no on-hand 2532 silicon was bench-tested. Non-JEDEC 24-pin oddball; the DIP24_2532 pinout is a tentative leaf layout requiring bench validation. VPP lands on pin 21 (DIP24_2532 vpp-pin) per the TI family datasheet \u2014 the GATE-03 structural VPP guard is satisfied.",
+      "support_status": "adapter-required",
+      "unsupported_reason": "adapter required: the shield drives chip pin 18 as CE and pin 20 as OE, but on the 2532 pin 18 is A11 and pin 20 is PD/PGM. The shield cannot drive A11, so only the lower 2 KB can be addressed, and the program pulse would go to A11. An adapter must move those pins.",
+      "verification_note": "SAFE-04 / D-11: no on-hand 2532 silicon was bench-tested. Non-JEDEC 24-pin oddball; the DIP24_2532 pinout is a tentative leaf layout requiring bench validation. VPP lands on pin 21 (DIP24_2532 vpp-pin) per the TI family datasheet \u2014 the GATE-03 structural VPP guard is satisfied. Socket pin 18 is the shield's CE driver, not an address latch, so host 3.2.4 sent bus line 256 (ROM_CE) for A11; firmware 3.2.1 truncated it to line 0, and later firmware refuses the frame. resolve_chip now refuses the row on its status.",
       "verification_status": "UNVERIFIED"
     }
   ],
@@ -16441,6 +16450,33 @@
         "pulse_duration_us": 100
       },
       "support_status": "supported"
+    },
+    {
+      "datasheet": "datasheets/TMM27128AD.pdf",
+      "electrical": {
+        "pin_count": 28,
+        "size_bytes": 16384,
+        "type": "UV-EPROM",
+        "vcc_mv": 5000,
+        "vdd_mv": 6000,
+        "vpp_mv": 12500
+      },
+      "part_number": "TMM27128AD,TMM27128AD-15,TMM27128AD-150,TMM27128AD-20,TMM27128AD-200",
+      "pinout": "DIP28_27128",
+      "programming": {
+        "algorithm": 7,
+        "chip_id_check": true,
+        "chip_id_value": "0x000098d3",
+        "infoic_page_size_raw": 0,
+        "protect_off_before": false,
+        "protect_on_after": false,
+        "pulse_duration_us": 1000
+      },
+      "provenance": "Physically real 28-pin NMOS UV-EPROM (Toshiba TMM27128AD, 16384 x 8), absent from minipro infoic.xml, whose TOSHIBA/KIOXIA section has no 27128-class part. Datasheet attached to henols/firestarter#73 by the reporter, vendored as datasheets/TMM27128AD.pdf (Toshiba pages G-27 to G-36). Page G-27: pin 1 VPP, pin 20 CE, pin 22 OE, pin 26 A13, pin 27 PGM, pin compatible with i27128A (DIP28_27128). Page G-30 HIGH SPEED PROGRAM OPERATION: VCC 5.75/6.0/6.25 V, VPP 12.0/12.5/13.0 V, tPW 0.95/1.0/1.05 ms. Page G-33/G-34: 1 ms PGM pulses verified after each, up to 25 times, then an over-program pulse of 3 times the pulses used. Page G-35 ELECTRIC SIGNATURE MODE: manufacturer code 98, device code D3. Read VCC 5 V (page G-28).",
+      "source": "non-upstream-supplement",
+      "support_status": "supported",
+      "verification_note": "Resolvable for read/info. No working sample has been tested: the chip reported in henols/firestarter#73 was dead. The datasheet program VCC is 6.0 V, but the shield holds VCC at 5 V, and the firmware does not send the over-program pulse.",
+      "verification_status": "UNVERIFIED"
     }
   ],
   "WED": [
@@ -16669,7 +16705,7 @@
         "type": "EEPROM",
         "vcc_mv": 5000,
         "vdd_mv": 5000,
-        "vpp_mv": 13500
+        "vpp_mv": 12000
       },
       "part_number": "W27E257",
       "pinout": "DIP28_27256",

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/data/pinouts.json

@@ -115,6 +115,16 @@
             "ce-pin": [22], "oe-pin": [24], "pgm-pin": [31]
         }
     },
+    "DIP32_27C301": {
+        "name": "Mask-ROM-compatible 32-pin UV-EPROM (27C301 / 27C1000 — OE on pin 2, A16 on pin 24)",
+        "comment": "infoic.xml pin map 12 with protocol 0x08 and variant_lo 0x00. Only MBM27C1000, MBM27C2000, HN27C301G, HN27C301AG and M27C1000 carry it; variant_lo 0x01 in the same map is the JEDEC 27C020 layout. Pin functions are from datasheets/MBM27C1000.pdf (page 4-61 pin assignment, page 4-63 pin description): pin 1 VPP, pin 2 OE, pin 22 CE, pin 24 A16, pin 31 PGM, pin 30 NC. one-rom chip-types.json type 27C301 (aliases 27C1000, 27C100) gives the same OE and A16 pins. JEDEC 27C010/27C020 swap pins 2 and 24, so on DIP32_27C020 these parts drive OE high whenever A16 is 1 (henols/firestarter#70). Pin 30 is A17 for the 256K MBM27C2000 row: <maps> index 12 bonds it, and it is the only bonded pin that has no other function on this layout. No MBM27C2000 datasheet is vendored to confirm it.",
+        "pins": {
+            "vcc-pin": [32], "gnd-pin": [16], "vpp-pin": [1],
+            "address-bus-pins": [12, 11, 10, 9, 8, 7, 6, 5, 27, 26, 23, 25, 4, 28, 29, 3, 24, 30],
+            "data-bus-pins": [13, 14, 15, 17, 18, 19, 20, 21],
+            "ce-pin": [22], "oe-pin": [2], "pgm-pin": [31]
+        }
+    },
     "DIP32_27C801": {
         "name": "JEDEC 32-pin UV-EPROM 1M (27C080 / M27C801 — A19 on pin 1, VPP on pin 24)",
         "comment": "Per piersfinlayson/one-rom docs/CHIP-TYPES.md (datasheet-verified): the 8 Mbit 27C080/M27C801 class has 20 address lines (A0-A19) with A19 at pin 1, and VPP at pin 24 shared with /OE — the same OE/VPP sharing DIP28_27512 uses at pin 22. /PGM is pin 22 shared with /CE. Distinct from DIP32_STD (27C040 class: pin 1 = VPP, pin 31 = A18, 19 address lines) and from DIP32_27C020 (pin 31 = PGM). Assigned by resolve_pinout_key to pin_count=32 && pm_idx=12 && proto_id=0x08 && variant_lo=0x03 — the eight 1 MB rows AM27C080, AM27LV080, AT27C080, M27C801 (x2), MX27C8000, MX27C8000A, UPD27C8001. HARDWARE: A19 at pin 1 means socket pin 1 carries an address line, and on Rev 2.x shields socket pin 1 is also the VPP-enable line (JP5 = A19_CUT bridges it to the switched VPP node). JP5 must be cut for these parts, per the shield silkscreen.",

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/database.py

@@ -165,6 +165,11 @@ _MOVED_PIN_MAPS = {
         "chips. 27128/27C128 chips use DIP28_27128 and 27011 chips use "
         "DIP28_27011.",
     ),
+    "DIP32_27C020": (
+        ("DIP32_27C301",),
+        "Your pin-map override for DIP32_27C020 no longer applies to "
+        "27C301/27C1000 chips (OE on pin 2, A16 on pin 24). They use DIP32_27C301.",
+    ),
     "DIP32_28C512_EEPROM": (
         ("DIP32_28C040",),
         "Your pin-map override for DIP32_28C512_EEPROM is not used. "

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/firmware.py

@@ -517,8 +517,13 @@ class FirmwareManager:
         avrdude_path_override: str | None,
         avrdude_config_override: str | None,
         target_port: str | None,
+        force: bool = False,
     ) -> bool:
-        """Internal method to perform the Avrdude flashing process."""
+        """Internal method to perform the Avrdude flashing process.
+
+        `force` adds avrdude's `-F`, which skips the device-signature check,
+        for example for a 328PB clone bootloader that reports a 328P signature.
+        """
         start_time = time.time()
 
         partno, programmer_id, baud_rate = (
@@ -594,7 +599,9 @@ class FirmwareManager:
                     avrdude_config_path=avrdude_config_path,
                 )
 
-                stderr_output, return_code = avrdude.flash_firmware(hex_file_path)
+                stderr_output, return_code = avrdude.flash_firmware(
+                    hex_file_path, extra_flags=["-F"] if force else None
+                )
                 if return_code == 0:
                     logger.info(
                         f"Firmware successfully updated on {port_to_flash} ({time.time() - start_time:.2f}s)"  # noqa: E501
@@ -741,6 +748,7 @@ class FirmwareManager:
         avrdude_config_override: str | None,
         target_port: str | None,
         usb_id: str | None = None,
+        force: bool = False,
     ) -> bool:
         """Dispatch to the flasher for this board.
 
@@ -755,6 +763,7 @@ class FirmwareManager:
             avrdude_path_override=avrdude_path_override,
             avrdude_config_override=avrdude_config_override,
             target_port=target_port,
+            force=force,
         )
 
     def manage_firmware_update(
@@ -969,6 +978,7 @@ class FirmwareManager:
                 avrdude_config_override=avrdude_config_override,
                 target_port=port_to_use,
                 usb_id=usb_id,
+                force=bool(force_install),
             )
             # Clean up downloaded file
             if os.path.exists(hex_file):

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter/jumper_table.py

@@ -401,6 +401,16 @@ JUMPER_TABLE: Mapping[str, JumperEntry] = {
         rev20_jp4=Jp4Rev20.OPEN,
         rev22_jp4=Jp4Rev22.NO_JUMPER,
     ),
+    # Pins 1, 28, 30 and 32 have the DIP32_27C020 functions; only pins 2 and 24 differ.
+    "DIP32_27C301": JumperEntry(
+        vpp_lands=VppLanding.SOCKET_1,
+        pin1_signal="VPP",
+        jp1=Jp1.A13,
+        jp2=Jp2.A17,
+        jp3=Jp3.PIN32,
+        rev20_jp4=Jp4Rev20.OPEN,
+        rev22_jp4=Jp4Rev22.NO_JUMPER,
+    ),
     # VPP shares OE. Chip pin 1 is A19. The JP5 gate (jp5_gate.py) controls write and erase.
     "DIP32_27C801": JumperEntry(
         vpp_lands=VppLanding.OE,

{firestarter-3.2.4 → firestarter-3.2.5/firestarter.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: firestarter
-Version: 3.2.4
+Version: 3.2.5
 Summary: EPROM programmer software for the Relatively Universal ROM Programmer
 Author-email: Henrik Olsson <henols@gmail.com>
 Project-URL: Homepage, https://github.com/henols/firestarter_app

{firestarter-3.2.4 → firestarter-3.2.5}/firestarter.egg-info/scm_file_list.json

@@ -26,6 +26,7 @@
     "datasheets/MBM27C4001.pdf",
     "datasheets/MX27C4000.pdf",
     "datasheets/SST39SF0x0A.pdf",
+    "datasheets/TMM27128AD.pdf",
     "datasheets/TMS2764.pdf",
     "datasheets/UPD27128.pdf",
     "datasheets/W27C020.pdf",

firestarter-3.2.5/firestarter.egg-info/scm_version.json

@@ -0,0 +1,8 @@
+{
+  "tag": "3.2.5",
+  "distance": 0,
+  "node": "g75046d7",
+  "dirty": false,
+  "branch": "HEAD",
+  "node_date": "2026-10-27"
+}

{firestarter-3.2.4 → firestarter-3.2.5}/tests/__snapshots__/test_characterization.ambr

@@ -595,6 +595,8 @@
   Eprom Info          
   Name:               MBM27C1000P,MBM27C1000
   Manufacturer:       FUJITSU
+  Support status:      adapter-required
+  Reason:              adapter required: the shield drives chip pin 22 as CE and pin 24 as OE, but pin map DIP32_27C301 needs other functions on pins [2, 24]. An adapter must move those pins.
   Number of pins:     32
   Memory size         0x20000
   Type:               UV-EPROM
@@ -610,14 +612,14 @@
          32-DIP package
           -----v-----
     VPP -|  1     32 |- VCC   
-    A16 -|  2     31 |- PGM   
+    OE  -|  2     31 |- PGM   
     A15 -|  3     30 |- A17   
     A12 -|  4     29 |- A14   
     A7  -|  5     28 |- A13   
     A6  -|  6     27 |- A8    
     A5  -|  7     26 |- A9    
     A4  -|  8     25 |- A11   
-    A3  -|  9     24 |- OE    
+    A3  -|  9     24 |- A16   
     A2  -| 10     23 |- A10   
     A1  -| 11     22 |- CE    
     A0  -| 12     21 |- D7    
@@ -1441,6 +1443,7 @@
   | TC54256AF,TC54256AP | TOSHIBA/KIOXIA   |   28 | 0x98C4     | UV-EPROM    | 12.0v|
   | TC57256D            | TOSHIBA/KIOXIA   |   28 | 0x9845     | UV-EPROM    | 13.0v|
   | TC57512AD           | TOSHIBA/KIOXIA   |   28 | 0x9885     | UV-EPROM    | 13.0v|
+  | TMM27128AD,TMM27128…| TOSHIBA/KIOXIA   |   28 | 0x98D3     | UV-EPROM    | 12.5v|
   | WE128K8             | WED              |   32 |            | Flash/EEPROM| -    |
   | WE256K8             | WED              |   32 |            | Flash/EEPROM| -    |
   | WE512K8             | WED              |   32 |            | Flash/EEPROM| -    |
@@ -1450,7 +1453,7 @@
   | W27C04,W27C040,W27E…| WINBOND          |   32 | 0xDA86     | EEPROM      | 12.0v|
   | W27C257             | WINBOND          |   28 | 0xDA02     | EEPROM      | 12.0v|
   | W27C512,W27E512     | WINBOND          |   28 | 0xDA08     | EEPROM      | 12.0v|
-  | W27E257             | WINBOND          |   28 | 0xDA02     | EEPROM      | 13.5v|
+  | W27E257             | WINBOND          |   28 | 0xDA02     | EEPROM      | 12.0v|
   | W29C010,W29C011,W29…| WINBOND          |   32 | 0xDAC1     | Flash/EEPROM| -    |
   | W29C020,W29C020C,W2…| WINBOND          |   32 | 0xDA45     | Flash/EEPROM| -    |
   | W29C040,W29C042     | WINBOND          |   32 | 0xDA46     | Flash/EEPROM| -    |
@@ -1579,7 +1582,7 @@
   | W27C04,W27C040,W27E…| WINBOND          |   32 | 0xDA86     | EEPROM      | 12.0v|
   | W27C257             | WINBOND          |   28 | 0xDA02     | EEPROM      | 12.0v|
   | W27C512,W27E512     | WINBOND          |   28 | 0xDA08     | EEPROM      | 12.0v|
-  | W27E257             | WINBOND          |   28 | 0xDA02     | EEPROM      | 13.5v|
+  | W27E257             | WINBOND          |   28 | 0xDA02     | EEPROM      | 12.0v|
   +---------------------+------------------+------+------------+-------------+------+
   
   '''

{firestarter-3.2.4 → firestarter-3.2.5}/tests/golden/chip_database_field_inventory.json

@@ -13,48 +13,52 @@
     "generator_scan_scope": "generator_emitted_chip_entry_keys is NOT purely an ast walk of build_db.py's `chip_entry` construction -- five of the eleven top-level keys (datasheet, provenance, source, verification_note, verification_status) are never assigned through a variable named chip_entry at all. They enter chip_database.json via the VAR-05/D-10 post-decode merge (`complete_db.setdefault(mfg, []).extend(extra_chips)`) that reads tools/extra_chips.json wholesale and appends its two hand-curated chip records verbatim. Confirmed in-session: an ast walk scoped to `chip_entry` alone finds exactly 21 names, 5 short of this file's 26 -- the missing 5 are precisely the sparse-subset keys `why_counts_not_names` warns about. The gate's live derivation is therefore the UNION of an ast walk over build_db.py's `chip_entry` construction and a key scan of tools/extra_chips.json; both paths are covered, so a new field entering through either one is caught.",
     "phase_149_update": "Phase 149 Plan 03 (PGSZ-01) re-derived programming.page_size from 2 to 20 via the same independent traversal this file's own how_to_update instructs -- never hand-edited. build_db.py's provenance-keyed emit arm now also emits page_size for the 18 upstream-native protocol_id == 0x0D rows (15 at 128, 3 at 64), on top of the 2 pre-existing datasheet-curated _PAGE_SIZE_BY_PART rows this field's original count-of-2 recorded. Every other number in this file is unchanged; confirmed by an independent re-derivation of every level, not just this one key.",
     "phase_194_update": "Phase 194 Plan 03 (PAGE-02, D-01/D-02) re-derived programming.page_size from 20 to 45 via the same independent traversal -- never hand-edited. build_db.py's _PAGE_SIZE_BY_PART curated table was deleted; the emit arm's condition now reads the row's own upstream protocol_id being 0x0D or 0x05, with no curated arm remaining. The 25-row delta is the 27 upstream-native 0x05 rows minus the 2 that already carried the curated value. Every other number in this file -- including infoic_page_size_raw, still 744 -- was re-derived in the same traversal and confirmed unchanged.",
-    "dip24_2816_update": "The DIP24_2816 family change re-derived two counts via the same independent traversal -- never hand-edited. programming.page_size 45 -> 64: build_db.py now emits the upstream write granularity for the 19 DIP24_2816 rows. top-level unsupported_reason 10 -> 1: the damage guard exempts the DIP24_2816 layout, so its 9 adapter-required rows became supported and X88C64P is the only row with a reason. Every other number was re-derived in the same traversal and is unchanged."
+    "dip24_2816_update": "The DIP24_2816 family change re-derived two counts via the same independent traversal -- never hand-edited. programming.page_size 45 -> 64: build_db.py now emits the upstream write granularity for the 19 DIP24_2816 rows. top-level unsupported_reason 10 -> 1: the damage guard exempts the DIP24_2816 layout, so its 9 adapter-required rows became supported and X88C64P is the only row with a reason. Every other number was re-derived in the same traversal and is unchanged.",
+    "dip32_27c301_update": "top-level unsupported_reason 1 -> 6, re-derived by the same independent traversal: build_db.py gives the five 27C301 / 27C1000 rows (MBM27C1000, MBM27C2000, HN27C301G, HN27C301AG, M27C1000) the new DIP32_27C301 pin map, and marks them adapter-required with a reason, because the shield drives their pin 24 (A16) as OE. Every other number is unchanged.",
+    "27011_status_update": "top-level unsupported_reason 6 -> 9, re-derived by the same independent traversal: build_db.py marks a row protocol-not-implemented, with a reason, when its pin map has fewer address lines than its size needs. Only the three 27011 rows (AT27C011, D27011, D27C011) trip it (henols/firestarter#136). Every other number is unchanged.",
+    "tmm27128ad_update": "Re-derived by the same independent traversal after tools/extra_chips.json gained the TOSHIBA/KIOXIA TMM27128AD supplement row (henols/firestarter#73): chips 748 -> 749, manufacturers unchanged at 59; every all-rows count +1; the five supplement-only top-level keys (datasheet, provenance, source, verification_note, verification_status) 4 -> 5; infoic_page_size_raw, protect_off_before and protect_on_after 746 -> 747; protocol 7 count 172 -> 173. generator_emitted_chip_entry_keys is unchanged: the new row uses only keys already in it.",
+    "2532_status_update": "top-level unsupported_reason 9 -> 10, re-derived by the same independent traversal: the TEXAS INSTRUMENTS 2532 supplement row in tools/extra_chips.json is now adapter-required with a reason, because the shield drives its pin 18 (A11) as CE. Every other number is unchanged."
   },
   "totals": {
     "manufacturers": 59,
-    "chips": 748
+    "chips": 749
   },
   "levels": {
     "top": {
-      "electrical": 748,
-      "part_number": 748,
-      "pinout": 748,
-      "programming": 748,
-      "support_status": 748,
-      "unsupported_reason": 1,
-      "datasheet": 4,
-      "provenance": 4,
-      "source": 4,
-      "verification_note": 4,
-      "verification_status": 4,
+      "electrical": 749,
+      "part_number": 749,
+      "pinout": 749,
+      "programming": 749,
+      "support_status": 749,
+      "unsupported_reason": 10,
+      "datasheet": 5,
+      "provenance": 5,
+      "source": 5,
+      "verification_note": 5,
+      "verification_status": 5,
       "nc_pins": 221
     },
     "programming": {
-      "algorithm": 748,
-      "chip_id_check": 748,
-      "chip_id_value": 748,
-      "pulse_duration_us": 748,
-      "infoic_page_size_raw": 746,
-      "protect_off_before": 746,
-      "protect_on_after": 746,
+      "algorithm": 749,
+      "chip_id_check": 749,
+      "chip_id_value": 749,
+      "pulse_duration_us": 749,
+      "infoic_page_size_raw": 747,
+      "protect_off_before": 747,
+      "protect_on_after": 747,
       "page_size": 64
     },
     "electrical": {
-      "pin_count": 748,
-      "size_bytes": 748,
-      "type": 748,
-      "vcc_mv": 748,
-      "vdd_mv": 748,
-      "vpp_mv": 748
+      "pin_count": 749,
+      "size_bytes": 749,
+      "type": 749,
+      "vcc_mv": 749,
+      "vdd_mv": 749,
+      "vpp_mv": 749
     }
   },
   "protocol_chip_counts": {
-    "7": 172,
+    "7": 173,
     "8": 127,
     "11": 32
   },

{firestarter-3.2.4 → firestarter-3.2.5}/tests/golden/wire_dict.json

@@ -7770,7 +7770,7 @@
           13,
           14,
           15,
-          16
+          257
         ],
         "rw-pin": 22,
         "vpp-pin": 21
@@ -7863,7 +7863,7 @@
           13,
           14,
           15,
-          16,
+          257,
           20
         ],
         "rw-pin": 22,
@@ -8468,7 +8468,7 @@
           13,
           14,
           15,
-          16
+          257
         ],
         "rw-pin": 22,
         "vpp-pin": 21
@@ -8500,7 +8500,7 @@
           13,
           14,
           15,
-          16
+          257
         ],
         "rw-pin": 22,
         "vpp-pin": 21
@@ -15639,7 +15639,7 @@
           13,
           14,
           15,
-          16
+          257
         ],
         "rw-pin": 22,
         "vpp-pin": 21
@@ -21533,6 +21533,35 @@
       "pulse-delay": 100,
       "vpp_mv": 13000
     },
+    "TOSHIBA/KIOXIA|TMM27128AD,TMM27128AD-15,TMM27128AD-150,TMM27128AD-20,TMM27128AD-200|3": {
+      "algorithm": 7,
+      "bus-config": {
+        "bus": [
+          0,
+          1,
+          2,
+          3,
+          4,
+          5,
+          6,
+          7,
+          8,
+          9,
+          10,
+          11,
+          12,
+          13
+        ],
+        "rw-pin": 14,
+        "vpp-pin": 15
+      },
+      "chip-id": 39123,
+      "flags": 0,
+      "memory-size": 16384,
+      "pin-count": 28,
+      "pulse-delay": 1000,
+      "vpp_mv": 12500
+    },
     "WED|WE128K8|0": {
       "algorithm": 13,
       "bus-config": {
@@ -22032,7 +22061,7 @@
       "memory-size": 32768,
       "pin-count": 28,
       "pulse-delay": 100,
-      "vpp_mv": 13500
+      "vpp_mv": 12000
     },
     "WINBOND|W29C010,W29C011,W29C011A,W29EE010,W29EE012|6": {
       "algorithm": 5,