firestarter 3.2.2__tar.gz → 3.2.3__tar.gz

{firestarter-3.2.2/firestarter.egg-info → firestarter-3.2.3}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: firestarter
-Version: 3.2.2
+Version: 3.2.3
 Summary: EPROM programmer software for the Relatively Universal ROM Programmer
 Author-email: Henrik Olsson <henols@gmail.com>
 Project-URL: Homepage, https://github.com/henols/firestarter_app

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter/_version.py

@@ -18,7 +18,7 @@ version_tuple: tuple[int | str, ...]
 commit_id: str | None
 __commit_id__: str | None
 
-__version__ = version = '3.2.2'
-__version_tuple__ = version_tuple = (3, 2, 2)
+__version__ = version = '3.2.3'
+__version_tuple__ = version_tuple = (3, 2, 3)
 
-__commit_id__ = commit_id = 'ga7d562c'
+__commit_id__ = commit_id = 'g660e8c4'

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter/data/chip_database.json

@@ -190,7 +190,7 @@
         "vpp_mv": 13000
       },
       "part_number": "AM27128A",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -366,7 +366,7 @@
         "vpp_mv": 13000
       },
       "part_number": "AM27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -1478,7 +1478,7 @@
         "vpp_mv": 13000
       },
       "part_number": "SMJ27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -1612,7 +1612,7 @@
         "vpp_mv": 13000
       },
       "part_number": "AT27C011",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27011",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -1700,7 +1700,7 @@
         "vpp_mv": 13000
       },
       "part_number": "AT27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -3331,7 +3331,7 @@
         "vpp_mv": 13000
       },
       "part_number": "CAT27128A",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -4222,7 +4222,7 @@
         "vpp_mv": 13000
       },
       "part_number": "CY27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -5403,7 +5403,7 @@
         "vpp_mv": 13000
       },
       "part_number": "NM27C128,NMC27C128B,NMC27C128C",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -5603,7 +5603,7 @@
         "vpp_mv": 21000
       },
       "part_number": "MBM27128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -5735,7 +5735,7 @@
         "vpp_mv": 18000
       },
       "part_number": "MBM27C128P",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -6001,7 +6001,7 @@
         "vpp_mv": 13000
       },
       "part_number": "GR27128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -6069,7 +6069,7 @@
         "vpp_mv": 13000
       },
       "part_number": "HN27128AG,HN27128AP",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -7031,7 +7031,7 @@
         "vpp_mv": 13000
       },
       "part_number": "D27011",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27011",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -7053,7 +7053,7 @@
         "vpp_mv": 13000
       },
       "part_number": "D27C011",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27011",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -7141,7 +7141,7 @@
         "vpp_mv": 18000
       },
       "part_number": "27128,D27128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -7163,7 +7163,7 @@
         "vpp_mv": 12000
       },
       "part_number": "27128A,D27128A,D27128B",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -7339,7 +7339,7 @@
         "vpp_mv": 12000
       },
       "part_number": "27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -8870,7 +8870,7 @@
         "vpp_mv": 13000
       },
       "part_number": "27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -9406,7 +9406,7 @@
         "vpp_mv": 18000
       },
       "part_number": "M5M27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -9806,7 +9806,7 @@
         "vpp_mv": 12000
       },
       "part_number": "UPD27128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -9916,7 +9916,7 @@
         "vpp_mv": 12000
       },
       "part_number": "UPD27C128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,
@@ -10229,7 +10229,7 @@
         "vpp_mv": 13000
       },
       "part_number": "NM27C128,NMC27C128B,NMC27C128C",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -11277,7 +11277,7 @@
         "vpp_mv": 12000
       },
       "part_number": "M27128A",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -11916,7 +11916,7 @@
         "vpp_mv": 12000
       },
       "part_number": "ST27128A",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -13314,7 +13314,7 @@
         "vpp_mv": 12000
       },
       "part_number": "M27128A",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -13997,7 +13997,7 @@
         "vpp_mv": 12000
       },
       "part_number": "ST27128A",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -14889,7 +14889,7 @@
         "vpp_mv": 13000
       },
       "part_number": "SMJ27C128,TMS27C128,TMS27PC128",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -16270,7 +16270,7 @@
         "vpp_mv": 13000
       },
       "part_number": "WS27C128F",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": true,
@@ -16358,7 +16358,7 @@
         "vpp_mv": 13000
       },
       "part_number": "WS57C128FB",
-      "pinout": "DIP28_2764",
+      "pinout": "DIP28_27128",
       "programming": {
         "algorithm": 7,
         "chip_id_check": false,

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter/data/pinouts.json

@@ -22,10 +22,33 @@
         }
     },
     "DIP28_2764": {
-        "name": "JEDEC 2764/128",
+        "name": "JEDEC 2764/27C64",
+        "comment": "infoic.xml pin map 21, which leaves pin 26 unbonded: pin 26 NC, and pin 27 PGM. The host sends PGM as the rw line, so the firmware holds it high for read. See datasheets/TMS2764.pdf.",
         "pins": {
             "vcc-pin": [28], "gnd-pin": [14], "vpp-pin": [1],
             "pgm-pin": [27], "nc-pin": [26],
+            "address-bus-pins": [10, 9, 8, 7, 6, 5, 4, 3, 25, 24, 21, 23, 2],
+            "data-bus-pins": [11, 12, 13, 15, 16, 17, 18, 19],
+            "ce-pin": [20], "oe-pin": [22]
+        }
+    },
+    "DIP28_27128": {
+        "name": "JEDEC 27128/27C128",
+        "comment": "infoic.xml pin map 22 (pin_map 0x00000c16), which bonds pin 26 as A13. Pin 27 is PGM; the host sends it as the rw line.",
+        "pins": {
+            "vcc-pin": [28], "gnd-pin": [14], "vpp-pin": [1],
+            "pgm-pin": [27],
+            "address-bus-pins": [10, 9, 8, 7, 6, 5, 4, 3, 25, 24, 21, 23, 2, 26],
+            "data-bus-pins": [11, 12, 13, 15, 16, 17, 18, 19],
+            "ce-pin": [20], "oe-pin": [22]
+        }
+    },
+    "DIP28_27011": {
+        "name": "27011 page-addressed EPROM",
+        "comment": "infoic.xml pin map 22 with pin_map 0x90000c16, which only the 27011 rows carry. Connectivity is <maps> index 22. The pin functions are the 27128 functions these rows had before the split; no 27011 datasheet was found to confirm them. Page selection is not implemented (henols/firestarter#136).",
+        "pins": {
+            "vcc-pin": [28], "gnd-pin": [14], "vpp-pin": [1],
+            "pgm-pin": [27],
             "address-bus-pins": [10, 9, 8, 7, 6, 5, 4, 3, 25, 24, 21, 23, 2, 26],
             "data-bus-pins": [11, 12, 13, 15, 16, 17, 18, 19],
             "ce-pin": [20], "oe-pin": [22]
@@ -33,7 +56,7 @@
     },
     "DIP28_JEDEC_SRAM_8K": {
         "name": "JEDEC 28-pin SRAM/FRAM 8K (6264/FM1608 family)",
-        "comment": "Standard JEDEC parallel SRAM/FRAM 28-pin layout. Same address bus as DIP28_2764 (A0-A12 at pins 10,9,...,2 — 13 address bits for 8K). Differs from DIP28_2764 at: pin 1 = NC (vs VPP), pin 27 = !WE (vs !PGM), pin 26 = NC. Used by 6264-class SRAM and Ramtron FM1608 FRAM. Tentative — bench-validation required for chip-specific layouts.",
+        "comment": "Standard JEDEC parallel SRAM/FRAM 28-pin layout. Same address bus as DIP28_2764 (A0-A12 at pins 10,9,...,2 — 13 address bits for 8K). Differs from DIP28_2764 at: pin 1 = NC (vs VPP), pin 27 = !WE (vs !PGM). Used by 6264-class SRAM and Ramtron FM1608 FRAM. Tentative — bench-validation required for chip-specific layouts.",
         "pins": {
             "vcc-pin": [28], "gnd-pin": [14],
             "rw-pin": [27], "nc-pin": [1, 26],
@@ -164,4 +187,4 @@
             "ce-pin": [22], "oe-pin": [24], "rw-pin": [30]
         }
     }
-}
+}

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter/database.py

@@ -235,6 +235,14 @@ class EpromDatabase:
                     pin_maps_base[key][sub_key] = (
                         sub_value  # Replace existing or add new
                     )
+        if "DIP28_2764" in manual_pin_map and not (
+            {"DIP28_27128", "DIP28_27011"} & manual_pin_map.keys()
+        ):
+            logger.warning(
+                "Your pin-map override for DIP28_2764 now applies only to 2764/27C64 "
+                "chips. 27128/27C128 chips use DIP28_27128 and 27011 chips use "
+                "DIP28_27011."
+            )
         return pin_maps_base
 
     def get_pin_map(self, pins: int, pin_map_id: str):
@@ -271,10 +279,14 @@ class EpromDatabase:
             )
             return None  # Cannot form bus without address pins
 
+        # A UV EPROM's PGM pin is its rw line: the firmware holds it high for
+        # read and low for write. A map with its own rw-pin keeps that pin.
+        rw_source = "rw-pin" if "rw-pin" in pin_map_data else "pgm-pin"
+
         # Handle pins that can be a single value or a list
-        for pin_func in ["rw-pin", "vpp-pin"]:
-            if pin_func in pin_map_data:
-                pin_val = pin_map_data[pin_func]
+        for pin_func, source in [("rw-pin", rw_source), ("vpp-pin", "vpp-pin")]:
+            if source in pin_map_data:
+                pin_val = pin_map_data[source]
                 # The value can be a list (e.g., [22]) or a single int.
                 # We'll take the first element if it's a list.
                 pin_to_check = pin_val[0] if isinstance(pin_val, list) else pin_val
@@ -286,7 +298,7 @@ class EpromDatabase:
                     map_config[pin_func] = resolved
                 else:
                     logger.warning(
-                        f"Pin function '{pin_func}' with pin number {pin_to_check} not in pin_conversions for {pins}-pin EPROM."  # noqa: E501
+                        f"Pin function '{source}' with pin number {pin_to_check} not in pin_conversions for {pins}-pin EPROM."  # noqa: E501
                     )
 
         if "static-high-pins" in pin_map_data and pins in pin_conversions:

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter/ic_layout.py

@@ -127,15 +127,16 @@ class EpromSpecBuilder:
         self.db = db_instance
 
     @staticmethod
-    def _first_pin(pin_field: list) -> int:
+    def _first_pin(pin_field: list | int) -> int:
         """Extract a scalar pin number from a single-element list pin field.
 
         Pin map fields like vpp-pin, oe-pin, and rw-pin are stored as
         single-element lists in pinouts.json (e.g. [22]).  This helper
         returns the first element so the caller can use it as an integer
-        index or in arithmetic comparisons.
+        index or in arithmetic comparisons. A local pin-map override may
+        give a bare int, as get_bus_config accepts; that is returned as is.
         """
-        return pin_field[0]
+        return pin_field[0] if isinstance(pin_field, list) else pin_field
 
     def get_chip_type_string(self, protocol_id: int | None = None) -> str:
         """Return a user-facing chip-type label.
@@ -342,6 +343,14 @@ class EpromSpecBuilder:
                 if "oe-pin" in pin_map_details
                 else None
             )  # noqa: E501
+            pgm_pin = (
+                self._first_pin(pin_map_details["pgm-pin"])
+                if "pgm-pin" in pin_map_details
+                else None
+            )
+            # Label PGM first, so a map that also names a real WE keeps R/W(WE).
+            if pgm_pin is not None and pgm_pin <= pin_count:
+                pin_names[pgm_pin - 1] = "PGM"
             if rw_pin is not None and rw_pin <= pin_count:
                 pin_names[rw_pin - 1] = "R/W(WE)"
             if vpp_pin is not None and vpp_pin <= pin_count:

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter/jumper_table.py

@@ -302,6 +302,7 @@ JUMPER_TABLE: Mapping[str, JumperEntry] = {
     ),
     # --- 28-pin. JP1 gives A13 to socket pin 28 (chip pin 26). JP2 gives +5 V to socket pin 30
     # (chip pin 28, VCC). Chip pin 1 is socket pin 3.
+    # Chip pin 26 is NC on this map, so JP1 is A13 only to agree with DIP28_27128.
     "DIP28_2764": JumperEntry(
         vpp_lands=VppLanding.SOCKET_3,
         pin1_signal="VPP",
@@ -312,6 +313,26 @@ JUMPER_TABLE: Mapping[str, JumperEntry] = {
         rev22_jp4=Jp4Rev22.POLE_28,
         probe_pending=True,
     ),
+    "DIP28_27128": JumperEntry(
+        vpp_lands=VppLanding.SOCKET_3,
+        pin1_signal="VPP",
+        jp1=Jp1.A13,
+        jp2=Jp2.VCC,
+        jp3=Jp3.PIN28,
+        rev20_jp4=Jp4Rev20.CLOSED,
+        rev22_jp4=Jp4Rev22.POLE_28,
+        probe_pending=True,
+    ),
+    "DIP28_27011": JumperEntry(
+        vpp_lands=VppLanding.SOCKET_3,
+        pin1_signal="VPP",
+        jp1=Jp1.A13,
+        jp2=Jp2.VCC,
+        jp3=Jp3.PIN28,
+        rev20_jp4=Jp4Rev20.CLOSED,
+        rev22_jp4=Jp4Rev22.POLE_28,
+        probe_pending=True,
+    ),
     "DIP28_27256": JumperEntry(
         vpp_lands=VppLanding.SOCKET_3,
         pin1_signal="VPP",

{firestarter-3.2.2 → firestarter-3.2.3/firestarter.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: firestarter
-Version: 3.2.2
+Version: 3.2.3
 Summary: EPROM programmer software for the Relatively Universal ROM Programmer
 Author-email: Henrik Olsson <henols@gmail.com>
 Project-URL: Homepage, https://github.com/henols/firestarter_app

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter.egg-info/scm_file_list.json

@@ -24,6 +24,7 @@
     "datasheets/MBM27C4001.pdf",
     "datasheets/MX27C4000.pdf",
     "datasheets/SST39SF0x0A.pdf",
+    "datasheets/TMS2764.pdf",
     "datasheets/W27C020.pdf",
     "datasheets/W27C512.pdf",
     "datasheets/W27E257.pdf",

{firestarter-3.2.2 → firestarter-3.2.3}/firestarter.egg-info/scm_version.json

@@ -1,7 +1,7 @@
 {
-  "tag": "3.2.2",
+  "tag": "3.2.3",
   "distance": 0,
-  "node": "ga7d562c",
+  "node": "g660e8c4",
   "dirty": false,
   "branch": "HEAD",
   "node_date": "2026-10-25"