euron-code 0.1.0__tar.gz

euron_code-0.1.0/.gitignore

@@ -0,0 +1,10 @@
+__pycache__/
+*.py[cod]
+*.egg-info/
+build/
+dist/
+.venv/
+venv/
+.pytest_cache/
+.euron/settings.local.json
+.coverage

euron_code-0.1.0/LICENSE

@@ -0,0 +1,23 @@
+Copyright (c) 2026 Euron. All rights reserved.
+
+This software and its source code, documentation and associated files (the
+"Software") are proprietary to Euron and are protected by copyright law.
+
+Euron grants you a limited, non-exclusive, non-transferable, revocable licence
+to install and run the Software solely to access the Euron Code service with an
+Euron account that is entitled to it (for example Euron Plus or Super 30).
+
+You may not, without the prior written permission of Euron:
+  - copy, modify, merge, publish, distribute, sublicense or sell the Software
+    or any part of it;
+  - reverse engineer, decompile or disassemble the Software, except to the
+    extent that applicable law expressly permits it;
+  - use the Software to access any service other than Euron Code, or to
+    circumvent any access control, quota or rate limit of the service.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL EURON BE LIABLE
+FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
+THE USE OR OTHER DEALINGS IN THE SOFTWARE.

euron_code-0.1.0/PKG-INFO

@@ -0,0 +1,278 @@
+Metadata-Version: 2.5
+Name: euron-code
+Version: 0.1.0
+Summary: Euron Code: an agentic coding assistant in your terminal for Euron Plus and Super 30 students.
+Project-URL: Homepage, https://euron.one/code-agent
+Author-email: Euron <contact@euron.one>
+License: Copyright (c) 2026 Euron. All rights reserved.
+        
+        This software and its source code, documentation and associated files (the
+        "Software") are proprietary to Euron and are protected by copyright law.
+        
+        Euron grants you a limited, non-exclusive, non-transferable, revocable licence
+        to install and run the Software solely to access the Euron Code service with an
+        Euron account that is entitled to it (for example Euron Plus or Super 30).
+        
+        You may not, without the prior written permission of Euron:
+          - copy, modify, merge, publish, distribute, sublicense or sell the Software
+            or any part of it;
+          - reverse engineer, decompile or disassemble the Software, except to the
+            extent that applicable law expressly permits it;
+          - use the Software to access any service other than Euron Code, or to
+            circumvent any access control, quota or rate limit of the service.
+        
+        THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+        IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
+        FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL EURON BE LIABLE
+        FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+        TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR
+        THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+License-File: LICENSE
+Keywords: ai,assistant,cli,coding agent,euron
+Classifier: Development Status :: 4 - Beta
+Classifier: Environment :: Console
+Classifier: Intended Audience :: Developers
+Classifier: Intended Audience :: Education
+Classifier: License :: Other/Proprietary License
+Classifier: Operating System :: OS Independent
+Classifier: Programming Language :: Python :: 3
+Classifier: Programming Language :: Python :: 3.9
+Classifier: Programming Language :: Python :: 3.10
+Classifier: Programming Language :: Python :: 3.11
+Classifier: Programming Language :: Python :: 3.12
+Classifier: Programming Language :: Python :: 3.13
+Classifier: Topic :: Software Development
+Requires-Python: >=3.9
+Requires-Dist: httpx<1,>=0.24
+Requires-Dist: keyring>=23.0
+Requires-Dist: prompt-toolkit>=3.0.30
+Requires-Dist: rich>=13.0
+Provides-Extra: db
+Requires-Dist: psycopg[binary]>=3.1; extra == 'db'
+Requires-Dist: pymysql>=1.0; extra == 'db'
+Provides-Extra: dev
+Requires-Dist: build>=1.0; extra == 'dev'
+Requires-Dist: pytest>=7; extra == 'dev'
+Provides-Extra: mysql
+Requires-Dist: pymysql>=1.0; extra == 'mysql'
+Provides-Extra: postgres
+Requires-Dist: psycopg[binary]>=3.1; extra == 'postgres'
+Description-Content-Type: text/markdown
+
+# Euron Code
+
+An AI coding agent for your terminal, made for Euron students. Ask it to explain a codebase, fix a
+bug, write tests or build a feature: it reads your files, proposes edits, runs commands and checks
+its own work, asking you before it changes anything.
+
+Euron Code runs on your computer. Only the conversation goes to Euron's model servers.
+
+> **Requires Euron Plus or Super 30.** Euron Code is included with both. Get Plus at
+> https://euron.one/plus
+
+## Install
+
+Python 3.9 or newer, on Windows, macOS or Linux.
+
+```bash
+pip install euron-code
+# or, to keep it isolated from your projects:
+pipx install euron-code
+```
+
+Optional database drivers for the database explorer:
+
+```bash
+pip install "euron-code[postgres]"   # Postgres
+pip install "euron-code[mysql]"      # MySQL / MariaDB
+```
+
+Check the install with `euron --version` and `euron doctor`.
+
+## Log in
+
+```bash
+euron login
+```
+
+Your browser opens a Euron page that shows a code (for example `WXYZ-1234`). Check that it matches
+the code in your terminal and click **Approve**. The terminal finishes by itself. If no browser opens
+(SSH, WSL), copy the link it prints into any browser where you are logged in to euron.one.
+
+Your key is saved in the system keychain (Windows Credential Manager, macOS Keychain, Linux Secret
+Service). If there is no keychain it goes in `~/.euron/credentials.json`, readable only by you.
+
+```bash
+euron whoami     # who you are logged in as, and your plan
+euron logout     # remove the key from this computer
+```
+
+## Use it
+
+Open a terminal **in your project folder** and run:
+
+```bash
+euron
+```
+
+Then type what you want, for example:
+
+- `explain how authentication works in this project`
+- `the tests in tests/test_api.py fail, find out why and fix it`
+- `add input validation to the signup form and a test for it`
+
+Euron Code works step by step: it looks around, reads files, shows you a diff before each edit, and
+asks before running commands. Answer:
+
+| Key | Meaning |
+|---|---|
+| `y` | yes, once |
+| `n` | no (you can then tell it what to do instead) |
+| `a` | always allow this for the rest of the session |
+| `p` | always allow commands starting the same way (e.g. every `npm test ...`) this session |
+| `s` | always, and save the rule to `.euron/settings.local.json` |
+
+Press **Esc** or **Ctrl-C** to stop a reply; the session stays open. **Ctrl-D** or `/exit` quits.
+**Esc then Enter** inserts a newline.
+
+### Commands inside a session
+
+| Command | What it does |
+|---|---|
+| `/help` | list commands |
+| `/usage` | plan, tokens used today and your daily limit, reset time, last 30 days |
+| `/cost` | tokens used in this session |
+| `/model [id]` | show or switch the model |
+| `/compact [focus]` | summarise the conversation to free context |
+| `/clear` | start a fresh conversation |
+| `/memory`, `/memory edit` | show or edit `EURON.md` memory |
+| `/init` | let Euron Code explore the repo and write `EURON.md` |
+| `/permissions` | show rules; `/permissions mode acceptEdits`, `/permissions allow "Bash(pytest:*)"` |
+| `/thinking show\|collapse\|hide` | how the model's reasoning is displayed |
+| `/todos` | the current task list |
+| `/doctor` | check your setup |
+| `/login`, `/logout`, `/exit` | |
+| `# some note` | save a note to memory (asks: project or user) |
+
+The bar at the bottom shows the model, tokens used this session, how full the context is, and how
+many tokens you have left today.
+
+### Continue later
+
+Every session is saved under `~/.euron/sessions/`.
+
+```bash
+euron --continue     # pick up the latest session in this folder
+euron --resume       # choose from a list
+```
+
+### Usage and limits
+
+```bash
+euron usage
+```
+
+shows your plan (Euron Plus / Super 30), tokens today out of your daily limit, what is left, when it
+resets (in your local time), all-time totals and a day-by-day table for the last 30 days. The daily
+allowance resets at midnight IST.
+
+Euron Code sends one request at a time per student. When the servers are busy it waits and retries
+by itself, and tells you.
+
+## Memory: EURON.md
+
+Put project instructions in `EURON.md` at the project root (commands to build and test, conventions,
+things to avoid). Euron Code reads it at the start of every session, together with `EURON.md` files in
+parent folders up to the git root and your personal `~/.euron/EURON.md`. Run `/init` to have a first
+version written for you.
+
+## Non-interactive use (scripts, CI)
+
+```bash
+euron -p "summarise what this repo does"
+git diff | euron -p "review this diff"
+euron -p "run the tests and fix failures" --allowed-tools "Edit,Bash(pytest:*)" --max-turns 20
+euron -p "list the API routes" --output-format json
+```
+
+In `-p` mode nothing can ask you, so anything that needs permission is refused unless an allow rule
+covers it (`--allowed-tools`, or settings). `--yolo` skips all prompts: only use it in a throwaway
+folder or container.
+
+Exit codes: `0` ok, `1` error, `2` bad usage, `3` no Euron Plus / Super 30 access, `4` not logged in or
+key rejected, `5` daily token allowance used, `6` `--max-turns` reached, `130` interrupted.
+
+## Database explorer
+
+Euron Code can look at your app's database while it works. SQLite files inside the project work
+directly (`look at app.db and tell me which tables have no index`). For Postgres or MySQL, name a
+connection in your settings; `${VAR}` reads from the environment so passwords stay out of the file:
+
+```bash
+euron config set --project db.connections.app "postgresql://dev:${PGPASSWORD}@localhost:5432/app"
+```
+
+It is **read-only**: only `SELECT`, `WITH`, `EXPLAIN`, `SHOW`, `PRAGMA` and similar are allowed, and
+the connection itself is opened read-only. To let it write (local dev databases only), run
+`euron config set db.allowWrites true`; every write statement still asks you first.
+
+## Settings
+
+`euron config set <key> <value>` writes `~/.euron/settings.json` (add `--project` for
+`.euron/settings.json` in the current folder). `euron config list` shows the merged result.
+
+| Key | Default | |
+|---|---|---|
+| `model` | your account default | model id |
+| `reasoning` | `collapse` | `show`, `collapse` or `hide` the model's thinking |
+| `permissions.allow` / `permissions.deny` | `[]` | rules like `Edit`, `Bash(npm test:*)`, `WebFetch(domain:docs.python.org)`, `Read(~/notes/**)` |
+| `permissions.defaultMode` | `default` | `default`, `acceptEdits` (edits inside the project need no prompt) or `yolo` |
+| `bashTimeout` | `120` | seconds before a command is stopped |
+| `shell` | auto | PowerShell on Windows, bash/zsh elsewhere; or `cmd`, `bash`, a path |
+| `autoCompact` | `true` | summarise old turns when the context is 75% full |
+| `webFetch` | `true` | allow the web page tool (it still asks per site) |
+| `db.connections.<name>` | | database DSNs |
+
+Environment variables: `EURON_CODE_API` (gateway URL, default
+`https://api.euron.one/api/v1/code-agent`), `EURON_API_KEY` (use a key without logging in, for CI),
+`EURON_HOME` (instead of `~/.euron`), `EURON_NO_BROWSER=1`.
+
+## In VS Code
+
+Open your project folder in VS Code, then open the integrated terminal (**Ctrl+`**, or
+**Terminal > New Terminal**) and run `euron`. It works in the folder VS Code opened, and edits show up
+in the editor straight away. Tips:
+
+- On Windows the integrated terminal is PowerShell by default; Euron Code runs commands with
+  PowerShell too. To use Git Bash instead: `euron config set shell bash`.
+- If `euron` is not found after `pip install`, the Python `Scripts` folder is not on your PATH.
+  Use `python -m euron_code`, or install with `pipx` (`pipx ensurepath`), then restart VS Code.
+- Keep your edits saved before asking Euron Code to change the same file.
+
+## Troubleshooting
+
+| You see | What to do |
+|---|---|
+| `You don't have Euron Plus access...` | Euron Code needs Euron Plus or an active Super 30 enrolment: https://euron.one/plus |
+| `not logged in` / `key was rejected` | run `euron login` again (keys can be revoked at euron.one/code-agent) |
+| `servers are busy, retrying` | normal at peak times; it retries for you. If it gives up, try again in a few minutes |
+| `Rate limit reached` | too many requests in one minute; it waits and retries |
+| `today's token allowance` | you used today's limit; it resets at the time shown (midnight IST) |
+| `The response stopped part-way` | the connection dropped mid-answer; nothing more was applied, send your message again |
+| `euron: command not found` | see the VS Code tips above, or run `python -m euron_code` |
+| garbled colours on old Windows consoles | use Windows Terminal or VS Code's terminal |
+
+`euron doctor` checks Python, the connection, your login and plan, ripgrep (faster search; optional)
+and the keychain.
+
+## Privacy and safety
+
+- Your files are only sent as part of the conversation with Euron's model, and only what the agent
+  reads. Nothing is uploaded anywhere else. There is no telemetry.
+- Your key is never printed in full and never logged.
+- Edits and commands ask first. Files outside the project folder always ask, even to read.
+- Text inside your files, web pages and command output is treated as data, not instructions.
+
+## Licence
+
+Copyright (c) 2026 Euron. All rights reserved. See `LICENSE`.

euron_code-0.1.0/README.md

@@ -0,0 +1,217 @@
+# Euron Code
+
+An AI coding agent for your terminal, made for Euron students. Ask it to explain a codebase, fix a
+bug, write tests or build a feature: it reads your files, proposes edits, runs commands and checks
+its own work, asking you before it changes anything.
+
+Euron Code runs on your computer. Only the conversation goes to Euron's model servers.
+
+> **Requires Euron Plus or Super 30.** Euron Code is included with both. Get Plus at
+> https://euron.one/plus
+
+## Install
+
+Python 3.9 or newer, on Windows, macOS or Linux.
+
+```bash
+pip install euron-code
+# or, to keep it isolated from your projects:
+pipx install euron-code
+```
+
+Optional database drivers for the database explorer:
+
+```bash
+pip install "euron-code[postgres]"   # Postgres
+pip install "euron-code[mysql]"      # MySQL / MariaDB
+```
+
+Check the install with `euron --version` and `euron doctor`.
+
+## Log in
+
+```bash
+euron login
+```
+
+Your browser opens a Euron page that shows a code (for example `WXYZ-1234`). Check that it matches
+the code in your terminal and click **Approve**. The terminal finishes by itself. If no browser opens
+(SSH, WSL), copy the link it prints into any browser where you are logged in to euron.one.
+
+Your key is saved in the system keychain (Windows Credential Manager, macOS Keychain, Linux Secret
+Service). If there is no keychain it goes in `~/.euron/credentials.json`, readable only by you.
+
+```bash
+euron whoami     # who you are logged in as, and your plan
+euron logout     # remove the key from this computer
+```
+
+## Use it
+
+Open a terminal **in your project folder** and run:
+
+```bash
+euron
+```
+
+Then type what you want, for example:
+
+- `explain how authentication works in this project`
+- `the tests in tests/test_api.py fail, find out why and fix it`
+- `add input validation to the signup form and a test for it`
+
+Euron Code works step by step: it looks around, reads files, shows you a diff before each edit, and
+asks before running commands. Answer:
+
+| Key | Meaning |
+|---|---|
+| `y` | yes, once |
+| `n` | no (you can then tell it what to do instead) |
+| `a` | always allow this for the rest of the session |
+| `p` | always allow commands starting the same way (e.g. every `npm test ...`) this session |
+| `s` | always, and save the rule to `.euron/settings.local.json` |
+
+Press **Esc** or **Ctrl-C** to stop a reply; the session stays open. **Ctrl-D** or `/exit` quits.
+**Esc then Enter** inserts a newline.
+
+### Commands inside a session
+
+| Command | What it does |
+|---|---|
+| `/help` | list commands |
+| `/usage` | plan, tokens used today and your daily limit, reset time, last 30 days |
+| `/cost` | tokens used in this session |
+| `/model [id]` | show or switch the model |
+| `/compact [focus]` | summarise the conversation to free context |
+| `/clear` | start a fresh conversation |
+| `/memory`, `/memory edit` | show or edit `EURON.md` memory |
+| `/init` | let Euron Code explore the repo and write `EURON.md` |
+| `/permissions` | show rules; `/permissions mode acceptEdits`, `/permissions allow "Bash(pytest:*)"` |
+| `/thinking show\|collapse\|hide` | how the model's reasoning is displayed |
+| `/todos` | the current task list |
+| `/doctor` | check your setup |
+| `/login`, `/logout`, `/exit` | |
+| `# some note` | save a note to memory (asks: project or user) |
+
+The bar at the bottom shows the model, tokens used this session, how full the context is, and how
+many tokens you have left today.
+
+### Continue later
+
+Every session is saved under `~/.euron/sessions/`.
+
+```bash
+euron --continue     # pick up the latest session in this folder
+euron --resume       # choose from a list
+```
+
+### Usage and limits
+
+```bash
+euron usage
+```
+
+shows your plan (Euron Plus / Super 30), tokens today out of your daily limit, what is left, when it
+resets (in your local time), all-time totals and a day-by-day table for the last 30 days. The daily
+allowance resets at midnight IST.
+
+Euron Code sends one request at a time per student. When the servers are busy it waits and retries
+by itself, and tells you.
+
+## Memory: EURON.md
+
+Put project instructions in `EURON.md` at the project root (commands to build and test, conventions,
+things to avoid). Euron Code reads it at the start of every session, together with `EURON.md` files in
+parent folders up to the git root and your personal `~/.euron/EURON.md`. Run `/init` to have a first
+version written for you.
+
+## Non-interactive use (scripts, CI)
+
+```bash
+euron -p "summarise what this repo does"
+git diff | euron -p "review this diff"
+euron -p "run the tests and fix failures" --allowed-tools "Edit,Bash(pytest:*)" --max-turns 20
+euron -p "list the API routes" --output-format json
+```
+
+In `-p` mode nothing can ask you, so anything that needs permission is refused unless an allow rule
+covers it (`--allowed-tools`, or settings). `--yolo` skips all prompts: only use it in a throwaway
+folder or container.
+
+Exit codes: `0` ok, `1` error, `2` bad usage, `3` no Euron Plus / Super 30 access, `4` not logged in or
+key rejected, `5` daily token allowance used, `6` `--max-turns` reached, `130` interrupted.
+
+## Database explorer
+
+Euron Code can look at your app's database while it works. SQLite files inside the project work
+directly (`look at app.db and tell me which tables have no index`). For Postgres or MySQL, name a
+connection in your settings; `${VAR}` reads from the environment so passwords stay out of the file:
+
+```bash
+euron config set --project db.connections.app "postgresql://dev:${PGPASSWORD}@localhost:5432/app"
+```
+
+It is **read-only**: only `SELECT`, `WITH`, `EXPLAIN`, `SHOW`, `PRAGMA` and similar are allowed, and
+the connection itself is opened read-only. To let it write (local dev databases only), run
+`euron config set db.allowWrites true`; every write statement still asks you first.
+
+## Settings
+
+`euron config set <key> <value>` writes `~/.euron/settings.json` (add `--project` for
+`.euron/settings.json` in the current folder). `euron config list` shows the merged result.
+
+| Key | Default | |
+|---|---|---|
+| `model` | your account default | model id |
+| `reasoning` | `collapse` | `show`, `collapse` or `hide` the model's thinking |
+| `permissions.allow` / `permissions.deny` | `[]` | rules like `Edit`, `Bash(npm test:*)`, `WebFetch(domain:docs.python.org)`, `Read(~/notes/**)` |
+| `permissions.defaultMode` | `default` | `default`, `acceptEdits` (edits inside the project need no prompt) or `yolo` |
+| `bashTimeout` | `120` | seconds before a command is stopped |
+| `shell` | auto | PowerShell on Windows, bash/zsh elsewhere; or `cmd`, `bash`, a path |
+| `autoCompact` | `true` | summarise old turns when the context is 75% full |
+| `webFetch` | `true` | allow the web page tool (it still asks per site) |
+| `db.connections.<name>` | | database DSNs |
+
+Environment variables: `EURON_CODE_API` (gateway URL, default
+`https://api.euron.one/api/v1/code-agent`), `EURON_API_KEY` (use a key without logging in, for CI),
+`EURON_HOME` (instead of `~/.euron`), `EURON_NO_BROWSER=1`.
+
+## In VS Code
+
+Open your project folder in VS Code, then open the integrated terminal (**Ctrl+`**, or
+**Terminal > New Terminal**) and run `euron`. It works in the folder VS Code opened, and edits show up
+in the editor straight away. Tips:
+
+- On Windows the integrated terminal is PowerShell by default; Euron Code runs commands with
+  PowerShell too. To use Git Bash instead: `euron config set shell bash`.
+- If `euron` is not found after `pip install`, the Python `Scripts` folder is not on your PATH.
+  Use `python -m euron_code`, or install with `pipx` (`pipx ensurepath`), then restart VS Code.
+- Keep your edits saved before asking Euron Code to change the same file.
+
+## Troubleshooting
+
+| You see | What to do |
+|---|---|
+| `You don't have Euron Plus access...` | Euron Code needs Euron Plus or an active Super 30 enrolment: https://euron.one/plus |
+| `not logged in` / `key was rejected` | run `euron login` again (keys can be revoked at euron.one/code-agent) |
+| `servers are busy, retrying` | normal at peak times; it retries for you. If it gives up, try again in a few minutes |
+| `Rate limit reached` | too many requests in one minute; it waits and retries |
+| `today's token allowance` | you used today's limit; it resets at the time shown (midnight IST) |
+| `The response stopped part-way` | the connection dropped mid-answer; nothing more was applied, send your message again |
+| `euron: command not found` | see the VS Code tips above, or run `python -m euron_code` |
+| garbled colours on old Windows consoles | use Windows Terminal or VS Code's terminal |
+
+`euron doctor` checks Python, the connection, your login and plan, ripgrep (faster search; optional)
+and the keychain.
+
+## Privacy and safety
+
+- Your files are only sent as part of the conversation with Euron's model, and only what the agent
+  reads. Nothing is uploaded anywhere else. There is no telemetry.
+- Your key is never printed in full and never logged.
+- Edits and commands ask first. Files outside the project folder always ask, even to read.
+- Text inside your files, web pages and command output is treated as data, not instructions.
+
+## Licence
+
+Copyright (c) 2026 Euron. All rights reserved. See `LICENSE`.

euron_code-0.1.0/pyproject.toml

@@ -0,0 +1,56 @@
+[build-system]
+requires = ["hatchling>=1.18"]
+build-backend = "hatchling.build"
+
+[project]
+name = "euron-code"
+version = "0.1.0"
+description = "Euron Code: an agentic coding assistant in your terminal for Euron Plus and Super 30 students."
+readme = "README.md"
+requires-python = ">=3.9"
+license = { file = "LICENSE" }
+authors = [{ name = "Euron", email = "contact@euron.one" }]
+keywords = ["euron", "coding agent", "cli", "ai", "assistant"]
+classifiers = [
+    "Development Status :: 4 - Beta",
+    "Environment :: Console",
+    "Intended Audience :: Developers",
+    "Intended Audience :: Education",
+    "License :: Other/Proprietary License",
+    "Operating System :: OS Independent",
+    "Programming Language :: Python :: 3",
+    "Programming Language :: Python :: 3.9",
+    "Programming Language :: Python :: 3.10",
+    "Programming Language :: Python :: 3.11",
+    "Programming Language :: Python :: 3.12",
+    "Programming Language :: Python :: 3.13",
+    "Topic :: Software Development",
+]
+dependencies = [
+    "httpx>=0.24,<1",
+    "rich>=13.0",
+    "prompt_toolkit>=3.0.30",
+    "keyring>=23.0",
+]
+
+[project.optional-dependencies]
+postgres = ["psycopg[binary]>=3.1"]
+mysql = ["PyMySQL>=1.0"]
+db = ["psycopg[binary]>=3.1", "PyMySQL>=1.0"]
+dev = ["pytest>=7", "build>=1.0"]
+
+[project.urls]
+Homepage = "https://euron.one/code-agent"
+
+[project.scripts]
+euron = "euron_code.cli:main"
+
+[tool.hatch.build.targets.wheel]
+packages = ["src/euron_code"]
+
+[tool.hatch.build.targets.sdist]
+include = ["src/euron_code", "tests", "README.md", "LICENSE", "pyproject.toml"]
+
+[tool.pytest.ini_options]
+testpaths = ["tests"]
+addopts = "-q"

euron_code-0.1.0/src/euron_code/__init__.py

@@ -0,0 +1,3 @@
+"""Euron Code: an agentic coding assistant for the terminal."""
+
+__version__ = "0.1.0"

euron_code-0.1.0/src/euron_code/__main__.py

@@ -0,0 +1,4 @@
+from euron_code.cli import main
+
+if __name__ == "__main__":
+    raise SystemExit(main())