embeddedci-openhtf 2.3.0__tar.gz → 2.4.0__tar.gz

This diff represents the content of publicly available package versions that have been released to one of the supported registries. The information contained in this diff is provided for informational purposes only and reflects changes between package versions as they appear in their respective public registries.
Files changed (28) hide show
  1. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/CHANGELOG.md +12 -0
  2. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/PKG-INFO +4 -4
  3. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/README.md +2 -2
  4. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/examples/analog_loopback.py +2 -2
  5. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/pyproject.toml +2 -2
  6. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/analog.py +8 -7
  7. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/plug.py +2 -2
  8. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_analog.py +6 -5
  9. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_e2e_openhtf.py +11 -0
  10. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_power.py +8 -8
  11. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/.gitignore +0 -0
  12. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/LICENSE +0 -0
  13. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/examples/flash_and_boot.py +0 -0
  14. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/examples/serial_smoke.py +0 -0
  15. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/examples/station.py +0 -0
  16. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/__init__.py +0 -0
  17. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/measurements.py +0 -0
  18. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/phases.py +0 -0
  19. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/pins.py +0 -0
  20. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/src/embeddedci_openhtf/power.py +0 -0
  21. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/_fake.py +0 -0
  22. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/conftest.py +0 -0
  23. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_docs_coverage.py +0 -0
  24. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_measurements.py +0 -0
  25. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_persistent.py +0 -0
  26. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_phases.py +0 -0
  27. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_pins.py +0 -0
  28. {embeddedci_openhtf-2.3.0 → embeddedci_openhtf-2.4.0}/tests/test_plug.py +0 -0
@@ -1,5 +1,17 @@
1
1
  # Changelog — `embeddedci-openhtf`
2
2
 
3
+ ## 2.4.0
4
+
5
+ - Needs embeddedci 3.0: wiring profiles live on the pod and nothing is wired by default. A plug
6
+ without a wiring profile needs `efuse=` for power calls; pass `wiring=` or save the bench's
7
+ profile on the pod.
8
+
9
+ ## 2.3.1
10
+
11
+ - `signal_generate`, `signal_generate_phase` and `loopback_measure_phase` default to
12
+ `dac_path="3v3"` instead of `"5v"`; `dac_replay_phase` now defaults to the path stored with the
13
+ waveform, else `"3v3"`. Pass `dac_path="5v"` to keep the old output.
14
+
3
15
  ## 2.3.0
4
16
 
5
17
  - Needs `embeddedci` 2.12.0 or later (was 2.4), the SDK whose `usb` connection reaches the USB
@@ -1,6 +1,6 @@
1
1
  Metadata-Version: 2.5
2
2
  Name: embeddedci-openhtf
3
- Version: 2.3.0
3
+ Version: 2.4.0
4
4
  Summary: OpenHTF plug for driving an EmbeddedCI BenchPod directly over TCP or serial (no cloud)
5
5
  Project-URL: Homepage, https://embeddedci.com
6
6
  Project-URL: Repository, https://github.com/embeddedci-com/embeddedci-python
@@ -18,7 +18,7 @@ Classifier: Programming Language :: Python :: 3.12
18
18
  Classifier: Programming Language :: Python :: 3.13
19
19
  Classifier: Topic :: Software Development :: Testing
20
20
  Requires-Python: >=3.10
21
- Requires-Dist: embeddedci<3,>=2.12.0
21
+ Requires-Dist: embeddedci<4,>=3.0.0
22
22
  Requires-Dist: openhtf>=1.6
23
23
  Provides-Extra: dev
24
24
  Requires-Dist: pytest>=7.0; extra == 'dev'
@@ -111,7 +111,7 @@ def pulse_and_wait(test, bench):
111
111
  ### LA voltage
112
112
 
113
113
  The pod refuses every LA-bank operation — **flashing, the UART proxy, LA capture,
114
- pull resistors, I2C-sensor emulation** — until the LA I/O-bank voltage is selected.
114
+ pull resistors, sensor emulation** — until the LA I/O-bank voltage is selected.
115
115
  Set it to your DUT's I/O voltage (`1.8` or `3.3` volts); the plug applies it right
116
116
  after connecting. Resolution order: `benchpod_plug(..., la_voltage=)`, then the
117
117
  `benchpod_la_voltage` conf key, then the `BENCHPOD_LA_VOLTAGE` env var. Leave all three
@@ -217,7 +217,7 @@ from embeddedci_openhtf import (
217
217
  bench = benchpod_plug("192.168.1.50:8080")
218
218
 
219
219
  test = htf.Test(
220
- # drive a 1 V-peak sine centred on 2.5 V (5V DAC path), capture the front ADC SMA
220
+ # drive a 1 V-peak sine centered on 2.5 V (5V DAC path), capture the front ADC SMA
221
221
  # while it runs, stop the DAC, and assert the round trip in volts
222
222
  loopback_measure_phase(bench, waveform="sine", freq_hz=100, amplitude=1.0,
223
223
  samples=4096, sample_rate_hz=50_000,
@@ -85,7 +85,7 @@ def pulse_and_wait(test, bench):
85
85
  ### LA voltage
86
86
 
87
87
  The pod refuses every LA-bank operation — **flashing, the UART proxy, LA capture,
88
- pull resistors, I2C-sensor emulation** — until the LA I/O-bank voltage is selected.
88
+ pull resistors, sensor emulation** — until the LA I/O-bank voltage is selected.
89
89
  Set it to your DUT's I/O voltage (`1.8` or `3.3` volts); the plug applies it right
90
90
  after connecting. Resolution order: `benchpod_plug(..., la_voltage=)`, then the
91
91
  `benchpod_la_voltage` conf key, then the `BENCHPOD_LA_VOLTAGE` env var. Leave all three
@@ -191,7 +191,7 @@ from embeddedci_openhtf import (
191
191
  bench = benchpod_plug("192.168.1.50:8080")
192
192
 
193
193
  test = htf.Test(
194
- # drive a 1 V-peak sine centred on 2.5 V (5V DAC path), capture the front ADC SMA
194
+ # drive a 1 V-peak sine centered on 2.5 V (5V DAC path), capture the front ADC SMA
195
195
  # while it runs, stop the DAC, and assert the round trip in volts
196
196
  loopback_measure_phase(bench, waveform="sine", freq_hz=100, amplitude=1.0,
197
197
  samples=4096, sample_rate_hz=50_000,
@@ -43,7 +43,7 @@ def build_test(pod: str) -> htf.Test:
43
43
  return htf.Test(
44
44
  htf.PhaseGroup(
45
45
  main=[
46
- # 1) loopback: a 100 Hz, 1 V-peak sine centred on 2.5 V (5V path),
46
+ # 1) loopback: a 100 Hz, 1 V-peak sine centered on 2.5 V (5V path),
47
47
  # captured while it runs; expect ~2 V peak-to-peak around 2.5 V.
48
48
  loopback_measure_phase(
49
49
  bench, waveform="sine", freq_hz=100, amplitude=1.0, offset=2.5,
@@ -52,7 +52,7 @@ def build_test(pod: str) -> htf.Test:
52
52
  ),
53
53
  # 2) free-run a square wave for 2 s, then snapshot the ADC on its own.
54
54
  signal_generate_phase(bench, waveform="square", freq_hz=100, amplitude=1.0,
55
- duration=2.0),
55
+ dac_path="5v", duration=2.0),
56
56
  adc_capture_phase(bench, samples=4096, sample_rate_hz=ADC_RATE_HZ,
57
57
  source="ext", pp_range=(1.8, 2.2)),
58
58
  ],
@@ -4,7 +4,7 @@ build-backend = "hatchling.build"
4
4
 
5
5
  [project]
6
6
  name = "embeddedci-openhtf"
7
- version = "2.3.0"
7
+ version = "2.4.0"
8
8
  description = "OpenHTF plug for driving an EmbeddedCI BenchPod directly over TCP or serial (no cloud)"
9
9
  readme = "README.md"
10
10
  requires-python = ">=3.10"
@@ -23,7 +23,7 @@ classifiers = [
23
23
  "Topic :: Software Development :: Testing",
24
24
  ]
25
25
  dependencies = [
26
- "embeddedci>=2.12.0,<3",
26
+ "embeddedci>=3.0.0,<4",
27
27
  "openhtf>=1.6",
28
28
  ]
29
29
 
@@ -92,12 +92,12 @@ _ADC_SOURCE_PATH: Dict[str, str] = {"ext": "adc_ext", "cal1": "cal1", "cal2": "c
92
92
  # -- low-level helpers (operate on a BenchPod or BenchPodPlug) ---------------
93
93
 
94
94
  def signal_generate(bench: Any, *, waveform: Waveshape, freq_hz: float, amplitude: float,
95
- offset: Optional[float] = None, dac_path: DacPath = "5v",
95
+ offset: Optional[float] = None, dac_path: DacPath = "3v3",
96
96
  duration: Optional[float] = None,
97
97
  sample_rate_hz: Optional[float] = None) -> DacHandle:
98
98
  """Start a parametric DAC waveform (``sine``/``square``/``sawtooth``) on ``dac_path``.
99
99
 
100
- ``amplitude`` is the peak and ``offset`` the centre, both in **volts** (``offset`` defaults to
100
+ ``amplitude`` is the peak and ``offset`` the center, both in **volts** (``offset`` defaults to
101
101
  the middle of the path's range). ``duration`` (seconds) stops it by itself; omitted, it runs
102
102
  until :func:`signal_stop` or the returned handle's ``stop()``. See
103
103
  :meth:`BenchPod.generate <embeddedci.benchpod.BenchPod.generate>`.
@@ -223,7 +223,7 @@ def _record_volts(test: Any, cap: Capture, *, prefix: str, attachment: Optional[
223
223
  # -- phase factories ---------------------------------------------------------
224
224
 
225
225
  def signal_generate_phase(plug: type, *, waveform: Waveshape, freq_hz: float, amplitude: float,
226
- offset: Optional[float] = None, dac_path: DacPath = "5v",
226
+ offset: Optional[float] = None, dac_path: DacPath = "3v3",
227
227
  duration: Optional[float] = None,
228
228
  sample_rate_hz: Optional[float] = None,
229
229
  name: str = "signal_generate") -> object:
@@ -362,7 +362,7 @@ def adc_capture_phase(plug: type, *, samples: int = 4096, sample_rate_hz: Option
362
362
 
363
363
  def loopback_measure_phase(plug: type, *, waveform: Waveshape = "sine", freq_hz: float,
364
364
  amplitude: float, offset: Optional[float] = None,
365
- dac_path: DacPath = "5v", samples: int = 4096,
365
+ dac_path: DacPath = "3v3", samples: int = 4096,
366
366
  sample_rate_hz: Optional[float] = None,
367
367
  source: Optional[AdcSource] = "ext", settle: float = 0.1,
368
368
  prefix: str = "adc", mean_range: _Range = None,
@@ -380,7 +380,7 @@ def loopback_measure_phase(plug: type, *, waveform: Waveshape = "sine", freq_hz:
380
380
  ``_rms_v`` / ``_min_v`` / ``_max_v``.
381
381
 
382
382
  Wire the DAC output SMA to the front ADC SMA (directly, or through the DUT whose response you
383
- are checking) and keep ``source="ext"``. E.g. a 1 V-peak sine centred on 2.5 V straight back
383
+ are checking) and keep ``source="ext"``. E.g. a 1 V-peak sine centered on 2.5 V straight back
384
384
  in: ``pp_range=(1.8, 2.2), mean_range=(2.4, 2.6)``.
385
385
  """
386
386
  _check_source(source)
@@ -454,12 +454,13 @@ def control_loop_phase(plug: type, *, voc_code: Optional[int] = None, sharpness:
454
454
  return _loop
455
455
 
456
456
 
457
- def dac_replay_phase(plug: type, *, waveform_id: str, dac_path: DacPath = "5v",
457
+ def dac_replay_phase(plug: type, *, waveform_id: str, dac_path: Optional[DacPath] = None,
458
458
  mapping: ReplayMapping = "faithful", target_samples: int = 4096,
459
459
  stop_after: bool = False, switch_image: bool = True,
460
460
  name: str = "dac_replay") -> object:
461
461
  """A phase that loads a cloud-stored waveform and replays it (looping) on the DAC.
462
462
 
463
+ ``dac_path`` left out is the path stored with the waveform, else ``3v3``.
463
464
  Needs server access (``BENCHPOD_API_KEY``). By default the replay keeps looping after the
464
465
  phase (so a later capture phase can observe it); set ``stop_after=True`` to stop it at the end
465
466
  of this phase. A replay that needs the deep-replay gateware image switches the pod to it first
@@ -474,7 +475,7 @@ def dac_replay_phase(plug: type, *, waveform_id: str, dac_path: DacPath = "5v",
474
475
  if handle.switched_image is not None:
475
476
  test.logger.warning("switched the FPGA to the deep-replay gateware image")
476
477
  test.logger.info("replaying waveform %s on %s (%d samples)",
477
- waveform_id, dac_path, handle.samples)
478
+ waveform_id, handle.dac_path, handle.samples)
478
479
  if stop_after:
479
480
  handle.stop()
480
481
 
@@ -43,7 +43,7 @@ wherever a channel does::
43
43
  gpio(bench, "TRIGGER").pulse(0.001) # the channel the profile names TRIGGER
44
44
 
45
45
  **LA voltage.** The pod refuses every LA-bank operation — flashing, the UART
46
- proxy, LA capture, pull resistors, I2C-sensor emulation — until the LA I/O-bank
46
+ proxy, LA capture, pull resistors, sensor emulation — until the LA I/O-bank
47
47
  voltage (1.8 or 3.3 V) is selected. Pass ``la_voltage=`` to :func:`benchpod_plug`,
48
48
  set the ``benchpod_la_voltage`` conf key, or export ``BENCHPOD_LA_VOLTAGE``; it is
49
49
  applied right after connecting.
@@ -100,7 +100,7 @@ htf.conf.declare(
100
100
  "benchpod_la_voltage",
101
101
  description=(
102
102
  "LA I/O-bank voltage in volts (1.8 or 3.3), selected right after connecting. The pod "
103
- "refuses flashing, UART, LA capture, pull resistors and I2C-sensor emulation until one "
103
+ "refuses flashing, UART, LA capture, pull resistors and sensor emulation until one "
104
104
  f"is set. Falls back to the {LA_VOLTAGE_ENV_VAR} env var."
105
105
  ),
106
106
  default_value=None,
@@ -65,11 +65,11 @@ def test_signal_generate_phase_converts_volts_through_generate():
65
65
  freq_hz=1000, amplitude=1.0, duration=0.5))
66
66
  assert rec.outcome == tr.Outcome.PASS
67
67
  i = _cmds(tx).index("generate")
68
- # generate routes the DAC path first, then sends 8-bit generator codes:
69
- # 1.0 V / (5 V / 255) = 51, offset defaults to mid-range 2.5 V -> 128.
70
- assert tx.commands[i - 1] == {"cmd": "dac_out", "path": "5v"}
68
+ # generate routes the DAC path first (3v3 when none is given), then sends 8-bit generator
69
+ # codes: 1.0 V / (3.3 V / 255) = 77, offset defaults to mid-range 1.65 V -> 127.
70
+ assert tx.commands[i - 1] == {"cmd": "dac_out", "path": "3v3"}
71
71
  assert tx.commands[i] == {"cmd": "generate", "waveform": "sine", "freq": 1000.0,
72
- "amplitude": 51, "offset": 128, "duration_ms": 500}
72
+ "amplitude": 77, "offset": 127, "duration_ms": 500}
73
73
 
74
74
 
75
75
  def test_signal_generate_helper_path_offset_and_rate():
@@ -169,8 +169,9 @@ def test_loopback_measure_phase_generates_captures_then_stops():
169
169
  assert rec.outcome == tr.Outcome.PASS
170
170
  # DAC first (its path re-applies and would open a loopback relay), then route the ADC.
171
171
  assert _cmds(tx) == ["dac_out", "generate", "analog_path", "capture", "dac_stop"]
172
+ assert tx.commands[0] == {"cmd": "dac_out", "path": "3v3"}
172
173
  assert tx.commands[1] == {"cmd": "generate", "waveform": "sine", "freq": 100.0,
173
- "amplitude": 51, "offset": 128}
174
+ "amplitude": 77, "offset": 127}
174
175
  assert tx.commands[2] == {"cmd": "analog_path", "path": "adc_ext"}
175
176
  assert tx.commands[3] == {"cmd": "capture", "samples": 8, "sample_rate_mhz": 0.05}
176
177
  p = _phase(rec, "loopback_measure")
@@ -45,7 +45,16 @@ def _run(*phases):
45
45
  return record, failed
46
46
 
47
47
 
48
+ def _require_analog(connection: str) -> None:
49
+ from embeddedci.benchpod import BenchPod
50
+
51
+ with BenchPod(connection, lease=False) as probe:
52
+ if not probe.can_analog:
53
+ pytest.skip("digital-only board: no analog front end (DAC, ADC, 4-20 mA)")
54
+
55
+
48
56
  def test_analog_phases_against_the_pod(benchpod_connection):
57
+ _require_analog(benchpod_connection)
49
58
  bench = benchpod_plug(benchpod_connection, la_voltage=LA_VOLTAGE)
50
59
  record, failed = _run(
51
60
  dac_output_phase(bench, path="5v", volts=2.5),
@@ -62,6 +71,8 @@ def test_current_loop_phases_against_the_pod(benchpod_connection):
62
71
  from embeddedci.benchpod import BenchPod
63
72
 
64
73
  with BenchPod(benchpod_connection, lease=False) as probe:
74
+ if not probe.can_analog:
75
+ pytest.skip("digital-only board: no analog front end (DAC, ADC, 4-20 mA)")
65
76
  if not probe.capabilities.current_out:
66
77
  pytest.skip("this pod's firmware has no current_out command")
67
78
  if os.environ.get("BENCHPOD_E2E_J8_WIRED") == "1":
@@ -37,7 +37,7 @@ def _request(tx, cmd="power_profile"):
37
37
 
38
38
  def test_measure_power_returns_si_units():
39
39
  tx = FakeTransport()
40
- plug = benchpod_plug(transport=tx)()
40
+ plug = benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1})()
41
41
  profile = measure_power(plug, 1.0)
42
42
  assert isinstance(profile, PowerProfile)
43
43
  assert _request(tx) == {"cmd": "power_profile", "efuse": 1, "rate_hz": 500,
@@ -51,7 +51,7 @@ def test_measure_power_returns_si_units():
51
51
 
52
52
  def test_measure_power_passes_its_keywords_through():
53
53
  tx = FakeTransport()
54
- plug = benchpod_plug(transport=tx)()
54
+ plug = benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1})()
55
55
  profile = measure_power(plug, 0.5, efuse=2, rate_hz=500, keep_samples=2)
56
56
  req = _request(tx)
57
57
  assert req["efuse"] == 2 and req["rate_hz"] == 500.0 and req["keep_samples"] == 2
@@ -70,7 +70,7 @@ def test_measure_power_uses_the_wiring_profile_rail():
70
70
 
71
71
  def test_measure_power_phase_records_current_voltage_and_energy():
72
72
  tx = FakeTransport()
73
- rec = _run(measure_power_phase(benchpod_plug(transport=tx), duration=1.0))
73
+ rec = _run(measure_power_phase(benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1}), duration=1.0))
74
74
  assert rec.outcome == tr.Outcome.PASS
75
75
  phase = _phase(rec, "measure_power")
76
76
  assert _value(phase, "power_avg_current_a") == pytest.approx(0.052)
@@ -85,20 +85,20 @@ def test_measure_power_phase_records_current_voltage_and_energy():
85
85
 
86
86
  def test_measure_power_phase_limits_pass_and_fail():
87
87
  tx = FakeTransport()
88
- rec = _run(measure_power_phase(benchpod_plug(transport=tx), duration=1.0,
88
+ rec = _run(measure_power_phase(benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1}), duration=1.0,
89
89
  avg_current_range=(0, 0.1), peak_current_range=(0, 0.2),
90
90
  energy_range=(0, 1.0)))
91
91
  assert rec.outcome == tr.Outcome.PASS
92
92
 
93
93
  tx = FakeTransport()
94
- rec = _run(measure_power_phase(benchpod_plug(transport=tx), duration=1.0,
94
+ rec = _run(measure_power_phase(benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1}), duration=1.0,
95
95
  avg_current_range=(0, 0.01))) # a 10 mA budget it blows
96
96
  assert rec.outcome == tr.Outcome.FAIL
97
97
 
98
98
 
99
99
  def test_measure_power_phase_attaches_the_kept_samples():
100
100
  tx = FakeTransport()
101
- rec = _run(measure_power_phase(benchpod_plug(transport=tx), duration=1.0, keep_samples=2,
101
+ rec = _run(measure_power_phase(benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1}), duration=1.0, keep_samples=2,
102
102
  efuse=2, rate_hz=500, prefix="sleep"))
103
103
  phase = _phase(rec, "measure_power")
104
104
  assert _value(phase, "sleep_avg_current_a") == pytest.approx(0.052)
@@ -109,7 +109,7 @@ def test_measure_power_phase_attaches_the_kept_samples():
109
109
 
110
110
  def test_measure_power_phase_can_skip_the_attachment():
111
111
  tx = FakeTransport()
112
- rec = _run(measure_power_phase(benchpod_plug(transport=tx), duration=1.0, keep_samples=2,
112
+ rec = _run(measure_power_phase(benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1}), duration=1.0, keep_samples=2,
113
113
  attachment=None))
114
114
  assert "power.json" not in _phase(rec, "measure_power").attachments
115
115
 
@@ -117,7 +117,7 @@ def test_measure_power_phase_can_skip_the_attachment():
117
117
  def test_measure_power_phase_reports_a_fault_and_a_truncated_profile():
118
118
  tx = FakeTransport()
119
119
  tx.power_stats = dict(tx.power_stats, fault=True, truncated=True)
120
- rec = _run(measure_power_phase(benchpod_plug(transport=tx), duration=1.0))
120
+ rec = _run(measure_power_phase(benchpod_plug(transport=tx, wiring={"version": 2, "efuse": 1}), duration=1.0))
121
121
  assert rec.outcome == tr.Outcome.PASS # no limits were given; the log carries the warning
122
122
  assert _value(_phase(rec, "measure_power"), "power_peak_current_a") == pytest.approx(0.18)
123
123