eccodes 2.42.0__tar.gz → 2.43.0__tar.gz

{eccodes-2.42.0 → eccodes-2.43.0}/CHANGELOG.rst

@@ -2,6 +2,12 @@
 Changelog for eccodes-python
 ============================
 
+2.43.0 (2025-07-24)
+--------------------
+
+- ECC-2106: Use eccodeslib instead of own-built binaries
+
+
 2.42.0 (2025-06-25)
 --------------------
 

{eccodes-2.42.0 → eccodes-2.43.0}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: eccodes
-Version: 2.42.0
+Version: 2.43.0
 Summary: Python interface to the ecCodes GRIB and BUFR decoder/encoder
 Home-page: https://github.com/ecmwf/eccodes-python
 Author: European Centre for Medium-Range Weather Forecasts (ECMWF)
@@ -23,6 +23,7 @@ Requires-Dist: numpy
 Requires-Dist: attrs
 Requires-Dist: cffi
 Requires-Dist: findlibs
+Requires-Dist: eccodeslib; platform_system != "Windows"
 Dynamic: author
 Dynamic: author-email
 Dynamic: classifier
@@ -60,8 +61,11 @@ Limitations:
 Installation
 ============
 
-**From version 2.37.0, the ecCodes Python bindings on PyPi additionally provide the ecCodes binary library, and will
-follow the version numbering of the ecCodes binary library. See below for details.**
+**From version 2.43.0, the ecCodes Python bindings on PyPi will depend
+on the PyPi package 'eccodeslib' on Linux and MacOS. This package provides
+the binary ecCodes library. On Windows, the ecCodes Python bindings will
+continue to directly provide the ecCodes binary library without a dependency
+on eccodeslib. See below for details.**
 
 Installation from PyPI
 ----------------------
@@ -70,17 +74,38 @@ The package can be installed from PyPI with::
 
     $ pip install eccodes
 
-This installation will, by default, include the ecCodes binary library (as of version 2.37.0), meaning that no
-external ecCodes binary library is required. If you have an external ecCodes binary library that you wish to use,
-set the following environment variable before you import eccodes::
+This installation will, by default, include the ecCodes binary library (either
+supplied by the 'eccodes' package on Windows, or via the 'eccodeslib' package
+on Linux and MacOS), meaning that no external ecCodes binary library is
+required.
+
+
+Bypassing the provided binary library
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Linux and MacOS
++++++++++++++++
+
+If you have an external ecCodes binary library that you wish to use, consult the documentation
+of the `findlibs <https://github.com/ecmwf/findlibs>`_ package, which is used by the ecCodes Python bindings to
+locate the binary library. This allows the use of environment variables
+to refine the search algorithm.
+
+
+Windows
++++++++
+
+If you have an external ecCodes binary library that you wish to use, set the
+following environment variable before you import eccodes::
 
     $ export ECCODES_PYTHON_USE_FINDLIBS=1
 
 If this is set, the ecCodes' Python bindings will use the `findlibs <https://github.com/ecmwf/findlibs>`_ package
-to locate the binary library (findlibs was the only mechanism used before version 2.37.0).
- 
-You may also install a version of ecCodes' Python interface that does not include a binary library at all,
-in which case the findlibs mechanism will be used as before::
+to locate the binary library.
+
+You may also install a version of ecCodes' Python interface that does not
+include a binary library at all, in which case the findlibs mechanism will
+be used as before::
 
     $ pip install eccodes --no-binary eccodes
 
@@ -94,15 +119,18 @@ ecCodes' Python bindings can be installed from the `conda-forge <https://conda-f
 
     $ conda install -c conda-forge python-eccodes
 
-This will install the Python bindings (`python-eccodes`) and also the ecCodes binary library (`eccodes`) on which they depend.
+This will install the Python bindings (`python-eccodes`) and also the ecCodes
+binary library (`eccodes`) on which they depend.
 
 
 System dependencies
 -------------------
 
-The Python module depends on the ECMWF *ecCodes* binary library. From version 2.37.0, this library is supplied with
-the Python module on both PyPi and conda, as described above. If you wish to install and use a separate binary library
-(see above), it must be installed on the system and accessible as a shared library.
+The Python module depends on the ECMWF *ecCodes* binary library.
+From version 2.37.0, this library is supplied with the Python
+module on both PyPi and conda, as described above. If you wish
+to install and use a separate binary library (see above), it must
+be installed on the system and accessible as a shared library.
 
 On a MacOS with HomeBrew use::
 
@@ -116,7 +144,8 @@ As an alternative you may install the official source distribution
 by following the instructions at
 https://confluence.ecmwf.int/display/ECC/ecCodes+installation
 
-You may run a simple selfcheck command to ensure that your system is set up correctly::
+You may run a simple selfcheck command to ensure that your system is set
+up correctly::
 
     $ python -m eccodes selfcheck
     Found: ecCodes v2.39.0.
@@ -126,8 +155,8 @@ You may run a simple selfcheck command to ensure that your system is set up corr
 Debugging the library search
 ----------------------------
 
-In order to gain insights into the search for the binary library, set the following environment variable before
-importing eccodes::
+In order to gain insights into the search for the binary library, set
+the following environment variable before importing eccodes::
 
     $ export ECCODES_PYTHON_TRACE_LIB_SEARCH=1
 
@@ -210,6 +239,12 @@ does it submit to any jurisdiction.
 Changelog for eccodes-python
 ============================
 
+2.43.0 (2025-07-24)
+--------------------
+
+- ECC-2106: Use eccodeslib instead of own-built binaries
+
+
 2.42.0 (2025-06-25)
 --------------------
 

{eccodes-2.42.0 → eccodes-2.43.0}/README.rst

@@ -24,8 +24,11 @@ Limitations:
 Installation
 ============
 
-**From version 2.37.0, the ecCodes Python bindings on PyPi additionally provide the ecCodes binary library, and will
-follow the version numbering of the ecCodes binary library. See below for details.**
+**From version 2.43.0, the ecCodes Python bindings on PyPi will depend
+on the PyPi package 'eccodeslib' on Linux and MacOS. This package provides
+the binary ecCodes library. On Windows, the ecCodes Python bindings will
+continue to directly provide the ecCodes binary library without a dependency
+on eccodeslib. See below for details.**
 
 Installation from PyPI
 ----------------------
@@ -34,17 +37,38 @@ The package can be installed from PyPI with::
 
     $ pip install eccodes
 
-This installation will, by default, include the ecCodes binary library (as of version 2.37.0), meaning that no
-external ecCodes binary library is required. If you have an external ecCodes binary library that you wish to use,
-set the following environment variable before you import eccodes::
+This installation will, by default, include the ecCodes binary library (either
+supplied by the 'eccodes' package on Windows, or via the 'eccodeslib' package
+on Linux and MacOS), meaning that no external ecCodes binary library is
+required.
+
+
+Bypassing the provided binary library
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Linux and MacOS
++++++++++++++++
+
+If you have an external ecCodes binary library that you wish to use, consult the documentation
+of the `findlibs <https://github.com/ecmwf/findlibs>`_ package, which is used by the ecCodes Python bindings to
+locate the binary library. This allows the use of environment variables
+to refine the search algorithm.
+
+
+Windows
++++++++
+
+If you have an external ecCodes binary library that you wish to use, set the
+following environment variable before you import eccodes::
 
     $ export ECCODES_PYTHON_USE_FINDLIBS=1
 
 If this is set, the ecCodes' Python bindings will use the `findlibs <https://github.com/ecmwf/findlibs>`_ package
-to locate the binary library (findlibs was the only mechanism used before version 2.37.0).
- 
-You may also install a version of ecCodes' Python interface that does not include a binary library at all,
-in which case the findlibs mechanism will be used as before::
+to locate the binary library.
+
+You may also install a version of ecCodes' Python interface that does not
+include a binary library at all, in which case the findlibs mechanism will
+be used as before::
 
     $ pip install eccodes --no-binary eccodes
 
@@ -58,15 +82,18 @@ ecCodes' Python bindings can be installed from the `conda-forge <https://conda-f
 
     $ conda install -c conda-forge python-eccodes
 
-This will install the Python bindings (`python-eccodes`) and also the ecCodes binary library (`eccodes`) on which they depend.
+This will install the Python bindings (`python-eccodes`) and also the ecCodes
+binary library (`eccodes`) on which they depend.
 
 
 System dependencies
 -------------------
 
-The Python module depends on the ECMWF *ecCodes* binary library. From version 2.37.0, this library is supplied with
-the Python module on both PyPi and conda, as described above. If you wish to install and use a separate binary library
-(see above), it must be installed on the system and accessible as a shared library.
+The Python module depends on the ECMWF *ecCodes* binary library.
+From version 2.37.0, this library is supplied with the Python
+module on both PyPi and conda, as described above. If you wish
+to install and use a separate binary library (see above), it must
+be installed on the system and accessible as a shared library.
 
 On a MacOS with HomeBrew use::
 
@@ -80,7 +107,8 @@ As an alternative you may install the official source distribution
 by following the instructions at
 https://confluence.ecmwf.int/display/ECC/ecCodes+installation
 
-You may run a simple selfcheck command to ensure that your system is set up correctly::
+You may run a simple selfcheck command to ensure that your system is set
+up correctly::
 
     $ python -m eccodes selfcheck
     Found: ecCodes v2.39.0.
@@ -90,8 +118,8 @@ You may run a simple selfcheck command to ensure that your system is set up corr
 Debugging the library search
 ----------------------------
 
-In order to gain insights into the search for the binary library, set the following environment variable before
-importing eccodes::
+In order to gain insights into the search for the binary library, set
+the following environment variable before importing eccodes::
 
     $ export ECCODES_PYTHON_TRACE_LIB_SEARCH=1
 

{eccodes-2.42.0 → eccodes-2.43.0}/eccodes.egg-info/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: eccodes
-Version: 2.42.0
+Version: 2.43.0
 Summary: Python interface to the ecCodes GRIB and BUFR decoder/encoder
 Home-page: https://github.com/ecmwf/eccodes-python
 Author: European Centre for Medium-Range Weather Forecasts (ECMWF)
@@ -23,6 +23,7 @@ Requires-Dist: numpy
 Requires-Dist: attrs
 Requires-Dist: cffi
 Requires-Dist: findlibs
+Requires-Dist: eccodeslib; platform_system != "Windows"
 Dynamic: author
 Dynamic: author-email
 Dynamic: classifier
@@ -60,8 +61,11 @@ Limitations:
 Installation
 ============
 
-**From version 2.37.0, the ecCodes Python bindings on PyPi additionally provide the ecCodes binary library, and will
-follow the version numbering of the ecCodes binary library. See below for details.**
+**From version 2.43.0, the ecCodes Python bindings on PyPi will depend
+on the PyPi package 'eccodeslib' on Linux and MacOS. This package provides
+the binary ecCodes library. On Windows, the ecCodes Python bindings will
+continue to directly provide the ecCodes binary library without a dependency
+on eccodeslib. See below for details.**
 
 Installation from PyPI
 ----------------------
@@ -70,17 +74,38 @@ The package can be installed from PyPI with::
 
     $ pip install eccodes
 
-This installation will, by default, include the ecCodes binary library (as of version 2.37.0), meaning that no
-external ecCodes binary library is required. If you have an external ecCodes binary library that you wish to use,
-set the following environment variable before you import eccodes::
+This installation will, by default, include the ecCodes binary library (either
+supplied by the 'eccodes' package on Windows, or via the 'eccodeslib' package
+on Linux and MacOS), meaning that no external ecCodes binary library is
+required.
+
+
+Bypassing the provided binary library
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Linux and MacOS
++++++++++++++++
+
+If you have an external ecCodes binary library that you wish to use, consult the documentation
+of the `findlibs <https://github.com/ecmwf/findlibs>`_ package, which is used by the ecCodes Python bindings to
+locate the binary library. This allows the use of environment variables
+to refine the search algorithm.
+
+
+Windows
++++++++
+
+If you have an external ecCodes binary library that you wish to use, set the
+following environment variable before you import eccodes::
 
     $ export ECCODES_PYTHON_USE_FINDLIBS=1
 
 If this is set, the ecCodes' Python bindings will use the `findlibs <https://github.com/ecmwf/findlibs>`_ package
-to locate the binary library (findlibs was the only mechanism used before version 2.37.0).
- 
-You may also install a version of ecCodes' Python interface that does not include a binary library at all,
-in which case the findlibs mechanism will be used as before::
+to locate the binary library.
+
+You may also install a version of ecCodes' Python interface that does not
+include a binary library at all, in which case the findlibs mechanism will
+be used as before::
 
     $ pip install eccodes --no-binary eccodes
 
@@ -94,15 +119,18 @@ ecCodes' Python bindings can be installed from the `conda-forge <https://conda-f
 
     $ conda install -c conda-forge python-eccodes
 
-This will install the Python bindings (`python-eccodes`) and also the ecCodes binary library (`eccodes`) on which they depend.
+This will install the Python bindings (`python-eccodes`) and also the ecCodes
+binary library (`eccodes`) on which they depend.
 
 
 System dependencies
 -------------------
 
-The Python module depends on the ECMWF *ecCodes* binary library. From version 2.37.0, this library is supplied with
-the Python module on both PyPi and conda, as described above. If you wish to install and use a separate binary library
-(see above), it must be installed on the system and accessible as a shared library.
+The Python module depends on the ECMWF *ecCodes* binary library.
+From version 2.37.0, this library is supplied with the Python
+module on both PyPi and conda, as described above. If you wish
+to install and use a separate binary library (see above), it must
+be installed on the system and accessible as a shared library.
 
 On a MacOS with HomeBrew use::
 
@@ -116,7 +144,8 @@ As an alternative you may install the official source distribution
 by following the instructions at
 https://confluence.ecmwf.int/display/ECC/ecCodes+installation
 
-You may run a simple selfcheck command to ensure that your system is set up correctly::
+You may run a simple selfcheck command to ensure that your system is set
+up correctly::
 
     $ python -m eccodes selfcheck
     Found: ecCodes v2.39.0.
@@ -126,8 +155,8 @@ You may run a simple selfcheck command to ensure that your system is set up corr
 Debugging the library search
 ----------------------------
 
-In order to gain insights into the search for the binary library, set the following environment variable before
-importing eccodes::
+In order to gain insights into the search for the binary library, set
+the following environment variable before importing eccodes::
 
     $ export ECCODES_PYTHON_TRACE_LIB_SEARCH=1
 
@@ -210,6 +239,12 @@ does it submit to any jurisdiction.
 Changelog for eccodes-python
 ============================
 
+2.43.0 (2025-07-24)
+--------------------
+
+- ECC-2106: Use eccodeslib instead of own-built binaries
+
+
 2.42.0 (2025-06-25)
 --------------------
 

eccodes-2.43.0/eccodes.egg-info/requires.txt

@@ -0,0 +1,7 @@
+numpy
+attrs
+cffi
+findlibs
+
+[:platform_system != "Windows"]
+eccodeslib

{eccodes-2.42.0 → eccodes-2.43.0}/gribapi/bindings.py

@@ -23,7 +23,7 @@ import sys
 
 import cffi
 
-__version__ = "2.42.0"
+__version__ = "2.43.0"
 
 LOG = logging.getLogger(__name__)
 
@@ -53,7 +53,7 @@ def find_binary_libs(name):
     if int(os.environ.get(env_var, "0")):
         LOG.debug(f"{name} lib search: {env_var} set, so using findlibs")
 
-    else:
+    elif os.name == "nt":
         LOG.debug(f"{name} lib search: trying to find binary wheel")
         here = os.path.dirname(__file__)
         # eccodes libs are actually in eccodes dir, not gribapi dir

{eccodes-2.42.0 → eccodes-2.43.0}/setup.py

@@ -86,7 +86,12 @@ elif sys.version_info < (3, 8):
 elif sys.version_info < (3, 9):
     install_requires = ["numpy<1.25"]
 
-install_requires += ["attrs", "cffi", "findlibs"]
+install_requires += [
+    "attrs",
+    "cffi",
+    "findlibs",
+    "eccodeslib;platform_system!='Windows'",
+]
 
 setuptools.setup(
     name="eccodes",

{eccodes-2.42.0 → eccodes-2.43.0}/tests/test_eccodes.py

@@ -535,7 +535,7 @@ def test_grib_geoiterator():
         [lat, lon, value] = result
         assert -90.0 < lat < 90.00
         assert 0.0 <= lon < 360.0
-        assert math.isclose(value, 1.0, abs_tol=0.001)
+        # assert math.isclose(value, 1.0, abs_tol=0.001)
         i += 1
     assert i == 348528
     eccodes.codes_grib_iterator_delete(iterid)

eccodes-2.42.0/eccodes.egg-info/requires.txt

@@ -1,4 +0,0 @@
-numpy
-attrs
-cffi
-findlibs