dnspython 2.7.0__tar.gz → 2.8.0__tar.gz

{dnspython-2.7.0 → dnspython-2.8.0}/PKG-INFO

@@ -1,6 +1,6 @@
-Metadata-Version: 2.3
+Metadata-Version: 2.4
 Name: dnspython
-Version: 2.7.0
+Version: 2.8.0
 Summary: DNS toolkit
 Project-URL: homepage, https://www.dnspython.org
 Project-URL: repository, https://github.com/rthalley/dnspython.git
@@ -17,42 +17,41 @@ Classifier: Operating System :: Microsoft :: Windows
 Classifier: Operating System :: POSIX
 Classifier: Programming Language :: Python
 Classifier: Programming Language :: Python :: 3
-Classifier: Programming Language :: Python :: 3.9
 Classifier: Programming Language :: Python :: 3.10
 Classifier: Programming Language :: Python :: 3.11
 Classifier: Programming Language :: Python :: 3.12
 Classifier: Programming Language :: Python :: 3.13
 Classifier: Topic :: Internet :: Name Service (DNS)
 Classifier: Topic :: Software Development :: Libraries :: Python Modules
-Requires-Python: >=3.9
+Requires-Python: >=3.10
 Provides-Extra: dev
-Requires-Dist: black>=23.1.0; extra == 'dev'
+Requires-Dist: black>=25.1.0; extra == 'dev'
 Requires-Dist: coverage>=7.0; extra == 'dev'
 Requires-Dist: flake8>=7; extra == 'dev'
-Requires-Dist: hypercorn>=0.16.0; extra == 'dev'
-Requires-Dist: mypy>=1.8; extra == 'dev'
+Requires-Dist: hypercorn>=0.17.0; extra == 'dev'
+Requires-Dist: mypy>=1.17; extra == 'dev'
 Requires-Dist: pylint>=3; extra == 'dev'
-Requires-Dist: pytest-cov>=4.1.0; extra == 'dev'
-Requires-Dist: pytest>=7.4; extra == 'dev'
-Requires-Dist: quart-trio>=0.11.0; extra == 'dev'
-Requires-Dist: sphinx-rtd-theme>=2.0.0; extra == 'dev'
-Requires-Dist: sphinx>=7.2.0; extra == 'dev'
-Requires-Dist: twine>=4.0.0; extra == 'dev'
-Requires-Dist: wheel>=0.42.0; extra == 'dev'
+Requires-Dist: pytest-cov>=6.2.0; extra == 'dev'
+Requires-Dist: pytest>=8.4; extra == 'dev'
+Requires-Dist: quart-trio>=0.12.0; extra == 'dev'
+Requires-Dist: sphinx-rtd-theme>=3.0.0; extra == 'dev'
+Requires-Dist: sphinx>=8.2.0; extra == 'dev'
+Requires-Dist: twine>=6.1.0; extra == 'dev'
+Requires-Dist: wheel>=0.45.0; extra == 'dev'
 Provides-Extra: dnssec
-Requires-Dist: cryptography>=43; extra == 'dnssec'
+Requires-Dist: cryptography>=45; extra == 'dnssec'
 Provides-Extra: doh
-Requires-Dist: h2>=4.1.0; extra == 'doh'
+Requires-Dist: h2>=4.2.0; extra == 'doh'
 Requires-Dist: httpcore>=1.0.0; extra == 'doh'
-Requires-Dist: httpx>=0.26.0; extra == 'doh'
+Requires-Dist: httpx>=0.28.0; extra == 'doh'
 Provides-Extra: doq
-Requires-Dist: aioquic>=1.0.0; extra == 'doq'
+Requires-Dist: aioquic>=1.2.0; extra == 'doq'
 Provides-Extra: idna
-Requires-Dist: idna>=3.7; extra == 'idna'
+Requires-Dist: idna>=3.10; extra == 'idna'
 Provides-Extra: trio
-Requires-Dist: trio>=0.23; extra == 'trio'
+Requires-Dist: trio>=0.30; extra == 'trio'
 Provides-Extra: wmi
-Requires-Dist: wmi>=1.5.1; extra == 'wmi'
+Requires-Dist: wmi>=1.5.1; (platform_system == 'Windows') and extra == 'wmi'
 Description-Content-Type: text/markdown
 
 # dnspython
@@ -65,39 +64,41 @@ Description-Content-Type: text/markdown
 
 ## INTRODUCTION
 
-dnspython is a DNS toolkit for Python. It supports almost all record types. It
-can be used for queries, zone transfers, and dynamic updates. It supports TSIG
-authenticated messages and EDNS0.
+`dnspython` is a DNS toolkit for Python. It supports almost all record types. It
+can be used for queries, zone transfers, and dynamic updates. It supports
+TSIG-authenticated messages and EDNS0.
 
-dnspython provides both high and low level access to DNS. The high level classes
-perform queries for data of a given name, type, and class, and return an answer
-set. The low level classes allow direct manipulation of DNS zones, messages,
-names, and records.
+`dnspython` provides both high- and low-level access to DNS. The high-level
+classes perform queries for data of a given name, type, and class, and return an
+answer set. The low-level classes allow direct manipulation of DNS zones,
+messages, names, and records.
 
-To see a few of the ways dnspython can be used, look in the `examples/`
+To see a few of the ways `dnspython` can be used, look in the `examples/`
 directory.
 
-dnspython is a utility to work with DNS, `/etc/hosts` is thus not used. For
+`dnspython` is a utility to work with DNS, `/etc/hosts` is thus not used. For
 simple forward DNS lookups, it's better to use `socket.getaddrinfo()` or
 `socket.gethostbyname()`.
 
-dnspython originated at Nominum where it was developed
-to facilitate the testing of DNS software.
+`dnspython` originated at Nominum where it was developed to facilitate the
+testing of DNS software.
 
 ## ABOUT THIS RELEASE
 
-This is dnspython 2.7.0.
+This is of `dnspython` 2.8.0.
 Please read
 [What's New](https://dnspython.readthedocs.io/en/stable/whatsnew.html) for
 information about the changes in this release.
 
 ## INSTALLATION
 
-* Many distributions have dnspython packaged for you, so you should
-  check there first.
+* Many distributions have dnspython packaged for you, so you should check there
+  first.
 * To use a wheel downloaded from PyPi, run:
 
+```
     pip install dnspython
+```
 
 * To install from the source code, go into the top-level of the source code
   and run:
@@ -108,11 +109,12 @@ information about the changes in this release.
     pip install dist/*.whl
 ```
 
-* To install the latest from the main branch, run `pip install git+https://github.com/rthalley/dnspython.git`
+* To install the latest from the main branch, run
+`pip install git+https://github.com/rthalley/dnspython.git`
 
-Dnspython's default installation does not depend on any modules other than
+`dnspython`'s default installation does not depend on any modules other than
 those in the Python standard library.  To use some features, additional modules
-must be installed.  For convenience, pip options are defined for the
+must be installed.  For convenience, `pip` options are defined for the
 requirements.
 
 If you want to use DNS-over-HTTPS, run
@@ -140,10 +142,8 @@ Note that you can install any combination of the above, e.g.:
 
 ### Notices
 
-Python 2.x support ended with the release of 1.16.0.  Dnspython 2.6.x supports
-Python 3.8 and later, though support for 3.8 ends on October 14, 2024.
-Dnspython 2.7.x supports Python 3.9 and later.  Future support is aligned with the
-lifetime of the Python 3 versions.
+Python 2.x support ended with the release of 1.16.0.  `dnspython` supports Python 3.10
+and later.  Future support is aligned with the lifetime of the Python 3 versions.
 
 Documentation has moved to
 [dnspython.readthedocs.io](https://dnspython.readthedocs.io).

{dnspython-2.7.0 → dnspython-2.8.0}/README.md

@@ -8,39 +8,41 @@
 
 ## INTRODUCTION
 
-dnspython is a DNS toolkit for Python. It supports almost all record types. It
-can be used for queries, zone transfers, and dynamic updates. It supports TSIG
-authenticated messages and EDNS0.
+`dnspython` is a DNS toolkit for Python. It supports almost all record types. It
+can be used for queries, zone transfers, and dynamic updates. It supports
+TSIG-authenticated messages and EDNS0.
 
-dnspython provides both high and low level access to DNS. The high level classes
-perform queries for data of a given name, type, and class, and return an answer
-set. The low level classes allow direct manipulation of DNS zones, messages,
-names, and records.
+`dnspython` provides both high- and low-level access to DNS. The high-level
+classes perform queries for data of a given name, type, and class, and return an
+answer set. The low-level classes allow direct manipulation of DNS zones,
+messages, names, and records.
 
-To see a few of the ways dnspython can be used, look in the `examples/`
+To see a few of the ways `dnspython` can be used, look in the `examples/`
 directory.
 
-dnspython is a utility to work with DNS, `/etc/hosts` is thus not used. For
+`dnspython` is a utility to work with DNS, `/etc/hosts` is thus not used. For
 simple forward DNS lookups, it's better to use `socket.getaddrinfo()` or
 `socket.gethostbyname()`.
 
-dnspython originated at Nominum where it was developed
-to facilitate the testing of DNS software.
+`dnspython` originated at Nominum where it was developed to facilitate the
+testing of DNS software.
 
 ## ABOUT THIS RELEASE
 
-This is dnspython 2.7.0.
+This is of `dnspython` 2.8.0.
 Please read
 [What's New](https://dnspython.readthedocs.io/en/stable/whatsnew.html) for
 information about the changes in this release.
 
 ## INSTALLATION
 
-* Many distributions have dnspython packaged for you, so you should
-  check there first.
+* Many distributions have dnspython packaged for you, so you should check there
+  first.
 * To use a wheel downloaded from PyPi, run:
 
+```
     pip install dnspython
+```
 
 * To install from the source code, go into the top-level of the source code
   and run:
@@ -51,11 +53,12 @@ information about the changes in this release.
     pip install dist/*.whl
 ```
 
-* To install the latest from the main branch, run `pip install git+https://github.com/rthalley/dnspython.git`
+* To install the latest from the main branch, run
+`pip install git+https://github.com/rthalley/dnspython.git`
 
-Dnspython's default installation does not depend on any modules other than
+`dnspython`'s default installation does not depend on any modules other than
 those in the Python standard library.  To use some features, additional modules
-must be installed.  For convenience, pip options are defined for the
+must be installed.  For convenience, `pip` options are defined for the
 requirements.
 
 If you want to use DNS-over-HTTPS, run
@@ -83,10 +86,8 @@ Note that you can install any combination of the above, e.g.:
 
 ### Notices
 
-Python 2.x support ended with the release of 1.16.0.  Dnspython 2.6.x supports
-Python 3.8 and later, though support for 3.8 ends on October 14, 2024.
-Dnspython 2.7.x supports Python 3.9 and later.  Future support is aligned with the
-lifetime of the Python 3 versions.
+Python 2.x support ended with the release of 1.16.0.  `dnspython` supports Python 3.10
+and later.  Future support is aligned with the lifetime of the Python 3 versions.
 
 Documentation has moved to
 [dnspython.readthedocs.io](https://dnspython.readthedocs.io).

{dnspython-2.7.0 → dnspython-2.8.0}/dns/__init__.py

@@ -21,6 +21,8 @@ __all__ = [
     "asyncbackend",
     "asyncquery",
     "asyncresolver",
+    "btree",
+    "btreezone",
     "dnssec",
     "dnssecalgs",
     "dnssectypes",

{dnspython-2.7.0 → dnspython-2.8.0}/dns/_asyncbackend.py

@@ -71,7 +71,7 @@ class NullTransport:
 
 
 class Backend:  # pragma: no cover
-    def name(self):
+    def name(self) -> str:
         return "unknown"
 
     async def make_socket(

{dnspython-2.7.0 → dnspython-2.8.0}/dns/_asyncio_backend.py

@@ -49,7 +49,8 @@ class _DatagramProtocol:
                 self.recvfrom.set_exception(exc)
 
     def close(self):
-        self.transport.close()
+        if self.transport is not None:
+            self.transport.close()
 
 
 async def _maybe_wait_for(awaitable, timeout):
@@ -130,7 +131,7 @@ if dns._features.have("doh"):
     import httpx
 
     _CoreAsyncNetworkBackend = httpcore.AsyncNetworkBackend
-    _CoreAnyIOStream = httpcore._backends.anyio.AnyIOStream
+    _CoreAnyIOStream = httpcore._backends.anyio.AnyIOStream  # pyright: ignore
 
     from dns.query import _compute_times, _expiration_for_this_attempt, _remaining
 
@@ -147,7 +148,7 @@ if dns._features.have("doh"):
                 )
 
         async def connect_tcp(
-            self, host, port, timeout, local_address, socket_options=None
+            self, host, port, timeout=None, local_address=None, socket_options=None
         ):  # pylint: disable=signature-differs
             addresses = []
             _, expiration = _compute_times(timeout)
@@ -180,7 +181,7 @@ if dns._features.have("doh"):
             raise httpcore.ConnectError
 
         async def connect_unix_socket(
-            self, path, timeout, socket_options=None
+            self, path, timeout=None, socket_options=None
         ):  # pylint: disable=signature-differs
             raise NotImplementedError
 
@@ -233,7 +234,7 @@ class Backend(dns._asyncbackend.Backend):
                 # proper fix for [#637].
                 source = (dns.inet.any_for_af(af), 0)
             transport, protocol = await loop.create_datagram_endpoint(
-                _DatagramProtocol,
+                _DatagramProtocol,  # pyright: ignore
                 source,
                 family=af,
                 proto=proto,

{dnspython-2.7.0 → dnspython-2.8.0}/dns/_features.py

@@ -85,11 +85,11 @@ def force(feature: str, enabled: bool) -> None:
 
 _requirements: Dict[str, List[str]] = {
     ### BEGIN generated requirements
-    "dnssec": ["cryptography>=43"],
-    "doh": ["httpcore>=1.0.0", "httpx>=0.26.0", "h2>=4.1.0"],
-    "doq": ["aioquic>=1.0.0"],
-    "idna": ["idna>=3.7"],
-    "trio": ["trio>=0.23"],
+    "dnssec": ["cryptography>=45"],
+    "doh": ["httpcore>=1.0.0", "httpx>=0.28.0", "h2>=4.2.0"],
+    "doq": ["aioquic>=1.2.0"],
+    "idna": ["idna>=3.10"],
+    "trio": ["trio>=0.30"],
     "wmi": ["wmi>=1.5.1"],
     ### END generated requirements
 }

{dnspython-2.7.0 → dnspython-2.8.0}/dns/_immutable_ctx.py

@@ -41,7 +41,7 @@ def _immutable_init(f):
         finally:
             _in__init__.reset(previous)
 
-    nf.__signature__ = inspect.signature(f)
+    nf.__signature__ = inspect.signature(f)  # pyright: ignore
     return nf
 
 

dnspython-2.8.0/dns/_no_ssl.py

@@ -0,0 +1,61 @@
+import enum
+from typing import Any
+
+CERT_NONE = 0
+
+
+class TLSVersion(enum.IntEnum):
+    TLSv1_2 = 12
+
+
+class WantReadException(Exception):
+    pass
+
+
+class WantWriteException(Exception):
+    pass
+
+
+class SSLWantReadError(Exception):
+    pass
+
+
+class SSLWantWriteError(Exception):
+    pass
+
+
+class SSLContext:
+    def __init__(self) -> None:
+        self.minimum_version: Any = TLSVersion.TLSv1_2
+        self.check_hostname: bool = False
+        self.verify_mode: int = CERT_NONE
+
+    def wrap_socket(self, *args, **kwargs) -> "SSLSocket":  # type: ignore
+        raise Exception("no ssl support")  # pylint: disable=broad-exception-raised
+
+    def set_alpn_protocols(self, *args, **kwargs):  # type: ignore
+        raise Exception("no ssl support")  # pylint: disable=broad-exception-raised
+
+
+class SSLSocket:
+    def pending(self) -> bool:
+        raise Exception("no ssl support")  # pylint: disable=broad-exception-raised
+
+    def do_handshake(self) -> None:
+        raise Exception("no ssl support")  # pylint: disable=broad-exception-raised
+
+    def settimeout(self, value: Any) -> None:
+        pass
+
+    def getpeercert(self) -> Any:
+        raise Exception("no ssl support")  # pylint: disable=broad-exception-raised
+
+    def __enter__(self):
+        return self
+
+    def __exit__(self, exc_type, exc_val, exc_tb):
+        return False
+
+
+def create_default_context(*args, **kwargs) -> SSLContext:  # type: ignore
+    raise Exception("no ssl support")  # pylint: disable=broad-exception-raised

dnspython-2.8.0/dns/_tls_util.py

@@ -0,0 +1,19 @@
+# Copyright (C) Dnspython Contributors, see LICENSE for text of ISC license
+
+import os
+from typing import Tuple
+
+
+def convert_verify_to_cafile_and_capath(
+    verify: bool | str,
+) -> Tuple[str | None, str | None]:
+    cafile: str | None = None
+    capath: str | None = None
+    if isinstance(verify, str):
+        if os.path.isfile(verify):
+            cafile = verify
+        elif os.path.isdir(verify):
+            capath = verify
+        else:
+            raise ValueError("invalid verify string")
+    return cafile, capath

{dnspython-2.7.0 → dnspython-2.8.0}/dns/_trio_backend.py

@@ -121,7 +121,7 @@ if dns._features.have("doh"):
             self._family = family
 
         async def connect_tcp(
-            self, host, port, timeout, local_address, socket_options=None
+            self, host, port, timeout=None, local_address=None, socket_options=None
         ):  # pylint: disable=signature-differs
             addresses = []
             _, expiration = _compute_times(timeout)
@@ -151,13 +151,14 @@ if dns._features.have("doh"):
                     sock = await Backend().make_socket(
                         af, socket.SOCK_STREAM, 0, source, destination, timeout
                     )
+                    assert isinstance(sock, StreamSocket)
                     return _CoreTrioStream(sock.stream)
                 except Exception:
                     continue
             raise httpcore.ConnectError
 
         async def connect_unix_socket(
-            self, path, timeout, socket_options=None
+            self, path, timeout=None, socket_options=None
         ):  # pylint: disable=signature-differs
             raise NotImplementedError
 
@@ -211,6 +212,7 @@ class Backend(dns._asyncbackend.Backend):
             if socktype == socket.SOCK_STREAM or destination is not None:
                 connected = False
                 with _maybe_timeout(timeout):
+                    assert destination is not None
                     await s.connect(_lltuple(destination, af))
                     connected = True
                 if not connected: