cgse 2023.37.0__tar.gz → 2023.38.0__tar.gz

{cgse-2023.37.0/src/cgse.egg-info → cgse-2023.38.0}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: cgse
-Version: 2023.37.0
+Version: 2023.38.0
 Summary: PLATO Common-EGSE
 Author-email: Rik Huygen <rik.huygen@kuleuven.be>, Sara Regibo <sara.regibo@kuleuven.be>
 Maintainer: Pierre Royer, Nicolas Beraud, Sena Gomashie, Jesus Saiz
@@ -16,7 +16,7 @@ Description-Content-Type: text/x-rst
 License-File: COPYING
 License-File: COPYING.LESSER
 Requires-Dist: apscheduler
-Requires-Dist: astropy==4.0
+Requires-Dist: astropy
 Requires-Dist: click
 Requires-Dist: deepdiff
 Requires-Dist: distro

{cgse-2023.37.0 → cgse-2023.38.0}/pyproject.toml

@@ -27,7 +27,7 @@ classifiers = [
 
 dependencies = [
     "apscheduler",
-    "astropy == 4.0",  # see issue #1306
+    "astropy",
     "click",
     "deepdiff",
     "distro",

{cgse-2023.37.0 → cgse-2023.38.0/src/cgse.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.1
 Name: cgse
-Version: 2023.37.0
+Version: 2023.38.0
 Summary: PLATO Common-EGSE
 Author-email: Rik Huygen <rik.huygen@kuleuven.be>, Sara Regibo <sara.regibo@kuleuven.be>
 Maintainer: Pierre Royer, Nicolas Beraud, Sena Gomashie, Jesus Saiz
@@ -16,7 +16,7 @@ Description-Content-Type: text/x-rst
 License-File: COPYING
 License-File: COPYING.LESSER
 Requires-Dist: apscheduler
-Requires-Dist: astropy==4.0
+Requires-Dist: astropy
 Requires-Dist: click
 Requires-Dist: deepdiff
 Requires-Dist: distro

{cgse-2023.37.0 → cgse-2023.38.0}/src/cgse.egg-info/SOURCES.txt

@@ -80,7 +80,6 @@ src/egse/aeu/aeu_protocol.py
 src/egse/aeu/aeu_psu.yaml
 src/egse/aeu/aeu_ui.py
 src/egse/aeu/arbdata/FccdRead.arb
-src/egse/aeu/arbdata/FccdRead_min_points 2.arb
 src/egse/aeu/arbdata/FccdRead_min_points.arb
 src/egse/aeu/arbdata/HeaterSync_FccdRead.arb
 src/egse/aeu/arbdata/HeaterSync_ccdRead25.arb
@@ -88,7 +87,6 @@ src/egse/aeu/arbdata/HeaterSync_ccdRead31_25.arb
 src/egse/aeu/arbdata/HeaterSync_ccdRead37_50.arb
 src/egse/aeu/arbdata/HeaterSync_ccdRead43_75.arb
 src/egse/aeu/arbdata/HeaterSync_ccdRead50.arb
-src/egse/aeu/arbdata/Heater_FccdRead_min_points 2.arb
 src/egse/aeu/arbdata/Heater_FccdRead_min_points.arb
 src/egse/aeu/arbdata/ccdRead25.arb
 src/egse/aeu/arbdata/ccdRead25_150ms.arb
@@ -630,14 +628,11 @@ src/scripts/create_hdf5_report.py
 src/scripts/csl_model.py
 src/scripts/csl_restore_setup.py
 src/scripts/export-grafana-dashboards.py
-src/scripts/fix_csv 2.py
 src/scripts/fix_csv.py
-src/scripts/n_fee_supply_voltage_calculation 2.py
 src/scripts/n_fee_supply_voltage_calculation.py
 src/scripts/playground.py
 src/scripts/print_hdf5_hk_data.py
 src/scripts/print_register_map.py
-src/scripts/update_operational_cgse 2.py
 src/scripts/update_operational_cgse.py
 src/scripts/update_operational_cgse_old.py
 src/scripts/alerts/cold.yaml

{cgse-2023.37.0 → cgse-2023.38.0}/src/cgse.egg-info/requires.txt

@@ -1,5 +1,5 @@
 apscheduler
-astropy==4.0
+astropy
 click
 deepdiff
 distro

{cgse-2023.37.0 → cgse-2023.38.0}/src/egse/alert/__init__.py

@@ -394,11 +394,14 @@ class Alert:
     def mask_check(self, value):
         """ Masks a bitmap and check the state of a single bit
         """
-        self.value = value
+        if isinstance(value, str):
+            value = eval(value)
+        
+        self.value = int(value)
         
-        if (int(value) >> self.configuration.limits['mask']) & 0b1:
+        if (self.value >> self.configuration.limits['mask']) & 0b1:
             self.timed_out = time.time() if self.timed_out == 0.0 else self.timed_out
-            if (time() - self.timed_out) > self.configuration.maximum_age:
+            if (time.time() - self.timed_out) > self.configuration.maximum_age:
                 self.trigger_alert()
         else:
             self.clear_alert()
@@ -452,7 +455,7 @@ class ControlServerWorker:
         
         for process_name, process_info in self.devices.items():
             
-            if ('alert' in process_name.lower())or ('fdir' in process_name.lower()):
+            if ('alert' in process_name.lower()) or ('fdir' in process_name.lower()) or ('dpu' in process_name.lower()):
                 continue
             
             self.monitors[process_name] = {'name' : process_name,

{cgse-2023.37.0 → cgse-2023.38.0}/src/egse/fov/fov_hk.py

@@ -374,25 +374,27 @@ class SronFovHk(FovHk):
                     rotx = radians(monitoring_info["alpha"])    # [radians]
                     roty = radians(monitoring_info["beta"])     # [radians]
 
+                    if isinstance(roty, float):
+                        rotx = np.array([rotx])
+                        roty = np.array([roty])
+
                     tolerance = 1.e-5
 
-                    # Gnomonic distance to optical axis and in-field angle [degrees]
+                    # Corrections based on #598
+                    # Copied from camtest.commanding.function.sron_functions.gimbal_rotations_to_fov_angles
+                    theta = np.arccos(np.cos(rotx) * np.cos(roty))
+
+                    phi = np.zeros_like(roty)
 
-                    theta = degrees(acos(cos(rotx) * cos(roty)))    # [degrees]
+                    sel = np.where(np.abs(roty) < tolerance)
 
-                    phi = 0.0
-                    if abs(roty) < tolerance:
-                        phi = sign(rotx) * pi / 2.
-                    elif abs(roty) > tolerance:
-                        phi = atan(sign(roty) * tan(rotx) / sin(roty))
+                    phi[sel] = np.sign(rotx[sel]) * np.pi/2.
 
-                    phi = degrees(phi)      # [degrees]
+                    sel = np.where(np.abs(roty) > tolerance)
 
-                    if roty < 0:
-                        phi = -180. - phi
+                    phi[sel] = np.arctan2(-np.sin(-rotx[sel]) * np.cos(roty[sel]), np.sin(roty[sel]))
 
-                    if phi < -180:
-                        phi += 360.
+                    theta, phi = np.rad2deg(theta), np.rad2deg(phi)
 
                     store_actual_fov_position(theta, phi)
 

{cgse-2023.37.0 → cgse-2023.38.0}/src/egse/settings.yaml

@@ -1,6 +1,6 @@
 Common-EGSE:
-    VERSION:                 2023.37.0+CGSE    # bump version here and below
-    RELEASE:                 September 2023, 2023.37.0+CGSE
+    VERSION:                 2023.38.0+CGSE    # bump version here and below
+    RELEASE:                 September 2023, 2023.38.0+CGSE
 
 SITE:
     ID:                            XXX

{cgse-2023.37.0 → cgse-2023.38.0}/src/scripts/print_register_map.py

@@ -10,7 +10,11 @@ from egse.reg import RegisterMap
 @click.command()
 @click.argument('filename')
 def print_register_map(filename: str | Path):
-    """Prints the Register Map that is saved in the HDF5 file."""
+    """
+    Prints the Register Map that is saved in the HDF5 file.
+
+    The FILENAME argument shall be the full path to the HDF5 file from which the register map is requested.
+    """
 
     filename = Path(filename)
 

cgse-2023.37.0/src/egse/aeu/arbdata/FccdRead_min_points 2.arb

@@ -1,2 +0,0 @@
-HEX
-7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 8001 8001 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 8001 8001 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 8001 8001 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 8001 8001 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 7FFF 8001 8001 

cgse-2023.37.0/src/egse/aeu/arbdata/Heater_FccdRead_min_points 2.arb

@@ -1,2 +0,0 @@
-HEX
-8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 8001 7FFF 7FFF 

cgse-2023.37.0/src/scripts/fix_csv 2.py

@@ -1,80 +0,0 @@
-"""
-Small script to fix some problems with CSV files.
-
-All the functions are written for a specific problem, you might need to run the script for
-several functions to fix different problems.
-
-Synopsis:
-
-   $ python3 fix_csv.py original_input.csv out.csv --function newlines
-   $ python3 fix_csv.py out.csv out2.csv --function vbar
-
-"""
-def fix_newlines_in_fields(input_file, output_file, delimiter: str = ','):
-    """
-    Sometimes we have seen that a field contains a newline character (usually due to an error
-    in processing the response from a device where the trailing newline was not removed). This
-    function tries to fix that problem.
-
-    Args:
-        input_file: the original CSV file where the problem occurs
-        output_file: the file with the fixed lines
-        delimiter: the delimiter that is used for the CSV [default=',']
-
-    Returns:
-        None.
-    """
-
-    with open(input_file, 'r') as fd:
-        lines = fd.read().split('\n')
-        fixed_lines = []
-        prev_line = None
-
-        for line in lines:
-            if prev_line is None:
-                # We assume the first row in the CSV file has the correct number of fields
-                expected_num_delimiters = line.count(delimiter)
-                prev_line = line
-            elif prev_line.count(delimiter) < expected_num_delimiters:
-                prev_line += line
-            else:
-                fixed_lines.append(prev_line)
-                prev_line = line
-
-        if prev_line is not None:
-            fixed_lines.append(prev_line)
-
-    with open(output_file, 'w', newline='\n') as fd:
-        fd.writelines([f"{x}\n" for x in fixed_lines])
-
-def fix_vertical_bar(input_file, output_file, delimiter: str = ','):
-    """Removes all vertical bar '|' characters from the file."""
-
-    with open(input_file, 'r') as fd:
-        lines = fd.read().split('\n')
-        fixed_lines = [line.replace('|', '') for line in lines]
-
-    with open(output_file, 'w', newline='\n') as fd:
-        fd.writelines([f"{x}\n" for x in fixed_lines])
-
-
-if __name__ == '__main__':
-
-    import argparse
-
-    parser = argparse.ArgumentParser(description="Script to fix several CSV issues")
-
-    parser.add_argument("input_file", help="Path to the input file")
-    parser.add_argument("output_file", help="Path to the output file")
-
-    parser.add_argument('--function', default='newlines', choices=('newlines', 'vbar'),
-                        help="Function to apply to the input file. Default: 'newlines'")
-
-    args = parser.parse_args()
-
-    if args.function == "newlines":
-        fix_newlines_in_fields(args.input_file, args.output_file)
-    elif args.function == "vbar":
-        fix_vertical_bar(args.input_file, args.output_file)
-    else:
-        print(f"Invalid function argument given: {args.function}.")

cgse-2023.37.0/src/scripts/n_fee_supply_voltage_calculation 2.py

@@ -1,92 +0,0 @@
-import pandas
-from math import isnan
-from egse.hk import read_conversion_dict
-from egse.fee.n_fee_hk import ORIGIN
-
-filename = "/Users/sara/work/Instrumentation/Plato/data/PLATO-MSSL-PL-FI-0063_1.1_N-FEE_PFM_HK_Calibrations_File.xlsx"
-
-
-def print_temperature_calibration(filename: str):
-    table = pandas.read_excel(filename, sheet_name="HK & DAC Calibrations",
-                              usecols="B, E, F, I, J",
-                              names=["mssl_names", "gain1", "offset1", "gain2", "offset2"])
-
-    mssl_names = table["mssl_names"]
-    gain1 = table["gain1"]
-    offset1 = table["offset1"]
-    gain2 = table["gain2"]
-    offset2 = table["offset2"]
-
-    hk_name_mapping = read_conversion_dict(ORIGIN, use_site=False)
-
-    for index in range(len(mssl_names)):
-        mssl_name = mssl_names[index]
-
-        if isinstance(mssl_name, str) and "[" in mssl_name and "]" in mssl_name:
-            mssl_name = mssl_name.split("[")[0]
-            egse_name = hk_name_mapping[mssl_name]
-
-            is_temperature_calibration = "_T_" in egse_name or "TRP" in egse_name
-            if is_temperature_calibration:
-                print(f"\t{egse_name} ({mssl_name}):")
-                # print(gain1[index], offset1[index])
-
-                if "TSENSE" in mssl_name:
-                    print(f"\t\tcounts_to_temperature_gain: {gain1[index]}")
-                    print(f"\tcounts_to_temperature_offset: {offset1[index]}")
-
-                else:
-                    print(f"\t\tcounts_to_resistance_gain: {gain2[index]}")
-                    print(f"\t\toffset: {offset2[index]}")
-                    print(f"\t\tresistance_to_temperature:")
-
-                    if "CCD" in mssl_name:
-                        print(f"\t\t\tmethod: polynomial")
-                        print(f"\t\t\ttemperature_to_resistance_coefficients: XXX")
-                    else:
-                        print(f"\t\t\tmethod: callendar_van_dusen")
-                        print(f"\t\t\tstandard: EN60751")
-                        print(f"\t\t\tref_resistance: 1000")
-
-
-def print_supply_voltage_calibration(filename: str):
-    table = pandas.read_excel(filename, sheet_name="HK & DAC Calibrations",
-                              usecols="B, T, U, E, F",
-                              names=["mssl_names", "gain1", "offset1", "gain2", "offset2"])
-
-    mssl_names = table["mssl_names"]
-    gain1 = table["gain1"]
-    offset1 = table["offset1"]
-    gain2 = table["gain2"]
-    offset2 = table["offset2"]
-
-    hk_name_mapping = read_conversion_dict(ORIGIN, use_site=False)
-
-    for index in range(len(mssl_names)):
-        mssl_name = mssl_names[index]
-
-        if isinstance(mssl_name, str) and "[" in mssl_name and "]" in mssl_name:
-            mssl_name = mssl_name.split("[")[0]
-            egse_name = hk_name_mapping[mssl_name]
-
-            is_temperature_calibration = "_T_" in egse_name or "TRP" in egse_name
-            if not is_temperature_calibration:
-                print(f"\t{egse_name}:")
-
-                if not isnan(gain1[index]) and not isnan(offset1[index]):
-                    print(f"\t\tgain: {gain1[index]}")
-                    print(f"\t\toffset: {offset1[index]}")
-                elif not isnan(gain2[index]) and not isnan(offset2[index]):
-                    print(f"\t\tgain: {gain2[index]}")
-                    print(f"\t\toffset: {offset2[index]}")
-
-
-def print_n_fee_calibration(filename):
-    print("temperatures:")
-    # TODO Print sub-sections
-    print_temperature_calibration(filename)
-
-    print("")
-
-    print("supply_voltages:")
-    print_supply_voltage_calibration(filename)

cgse-2023.37.0/src/scripts/update_operational_cgse 2.py

@@ -1,273 +0,0 @@
-import logging
-import os
-import sys
-from pathlib import Path
-
-import click
-import git
-import invoke
-import rich
-
-from egse.system import chdir
-
-THIS_FILE_LOCATION = Path(__file__).parent
-
-# The ROOT_PROJECT_FOLDER is the location where the Common-EGSE was installed.
-# For development installations, this is where the git repository was cloned,
-# for the operational system, this is usually '/cgse', but should match the
-# PLATO_INSTALL_LOCATION environment variable in any case.
-
-ROOT_PROJECT_FOLDER = THIS_FILE_LOCATION / "../.."
-
-MODULE_LOGGER = logging.getLogger("egse.scripts")
-
-
-class DirtyRepoError(Exception):
-    pass
-
-
-class GitCommandError(Exception):
-    pass
-
-
-def check_and_report_dirty_repo():
-    repo = git.Repo(Path.cwd())
-
-    if dirty := repo.is_dirty(untracked_files=False):
-        rich.print("You have uncommitted changes, unable to install the Common-EGSE.")
-
-        for item in repo.index.diff(None):
-            rich.print(f"  [red]Modified: {item.a_path}")
-
-        rich.print("Stash or submit your changes to GitHub.")
-
-        raise DirtyRepoError()
-
-
-def run_shell_command(cmd: str, hide: bool = True, warn: bool = True):
-    response = invoke.run(cmd, hide=hide, warn=warn)
-    rich.print(f"Executing '{response.command}'...")
-    if response.return_code:
-        MODULE_LOGGER.info(f"{response.stdout}")
-        MODULE_LOGGER.error(f"{response.stderr}")
-        raise GitCommandError()
-    return response
-
-
-def is_operational_install(location: str):
-    # location can be the following:
-    #
-    #   * root folder where Common-EGSE is installed, e.g. /cgse/lib/python
-    #   * the actual 'egg' folder where Common-EGSE is installed,
-    #     e.g. /cgse/lib/python/Common_EGSE-2021.3_SRON_RC37-py3.8.egg
-
-    rich.print(f"{location=}")
-
-    if ".egg" in location:
-        return True
-
-    candidates = [path for path in os.listdir(location) if path.startswith("Common_EGSE")]
-
-    rich.print(f"{candidates=}")
-
-    if candidates and candidates[0].endswith(".egg"):
-        return True
-
-    # add other tests here that might indicate operational install
-
-    return False
-
-
-@click.group()
-def cli():
-    pass
-
-
-@cli.command()
-@click.option("--tag", help="The Release number to install.")
-def ops(tag=None):
-    """
-    Update the Common-EGSE on the operational machine. An operational installation is different
-    from a developer installation. There is no virtual environment and the all required Python
-    packages, including the Common-EGSE are installed at a specific location. The installation
-    process makes use of the following environment variables:
-
-      * PLATO_COMMON_EGSE_PATH: the location of the plato-common-egse repository on your machine, e.g., '~/git/plato-common-egse'
-
-      * PLATO_INSTALL_LOCATION: the location where the packages shall be installed, usually '/cgse'
-
-    Don't update the operational system without a tag.
-
-    The following commands will be executed:
-
-      * git fetch updates
-
-      * git checkout tags/<tag> -b <tag>-branch
-
-      * python -m pip uninstall Common-EGSE
-
-      * python setup.py install --force --home=$PLATO_INSTALL_LOCATION
-
-    You will need to manually restart the core services as root on the egse-server:
-
-      * systemctl restart log_cs cm_cs sm_cs pm_cs dyn_cs
-
-    NOTE: This command only works on an installation with setuptools (not a development
-          installation). The installation must have been done in the location set by the
-          environment variable PLATO_INSTALL_LOCATION.
-
-    Args:
-        tag: the tag that needs to be used for the update.
-
-    """
-
-    try:
-        plato_install_location = os.environ["PLATO_INSTALL_LOCATION"]
-        MODULE_LOGGER.info(f"{plato_install_location=}")
-    except KeyError:
-        rich.print(
-            "[red]On an operational system, the PLATO_INSTALL_LOCATION environment variable must "
-            "be set.[/]\n"
-            "Please set this to the root folder of the installation, usually [default]'/cgse'."
-        )
-        return
-
-    if not Path(plato_install_location).exists():
-        rich.print(
-            f"[orange3]I didn't find the '{plato_install_location}' location on your system.[/]\n"
-            "Please check if the PLATO_INSTALL_LOCATION is set to the correct folder."
-        )
-        return
-
-    try:
-        plato_cgse_location = os.environ["PLATO_COMMON_EGSE_PATH"]
-        MODULE_LOGGER.info(f"{plato_cgse_location=}")
-    except KeyError:
-        rich.print(
-            "[red]On an operational system, the PLATO_COMMON_EGSE_PATH environment variable must "
-            "be set.[/]\nPlease set this to the root folder of the cloned repository, "
-            "usually [default]'~/git/plato-common-egse'."
-        )
-        return
-
-    with chdir(plato_cgse_location):
-        rich.print("Updating plato-common-egse...")
-
-        try:
-            run_shell_command("git fetch updates")
-            run_shell_command("git checkout develop")
-        except GitCommandError:
-            return
-
-        try:
-            check_and_report_dirty_repo()
-        except DirtyRepoError:
-            return
-
-        if tag:
-            try:
-                run_shell_command(f"git checkout tags/{tag} -b {tag}-branch")
-                response = run_shell_command(f"{sys.executable} -m pip show Common-EGSE | grep Location")
-                location = response.stdout.split(":")[1].strip()
-            except GitCommandError:
-                return
-            except IndexError as exc:
-                rich.print(f"[red]IndexError: {exc!s}[/red]")
-                return
-
-            do_uninstall = True
-            if not is_operational_install(location):
-                print(
-                    "It looks like your are not running a production environment, "
-                    "or you have a different kind of installation. "
-                )
-                response = input("Is this a first-time installation? [y/n] ")
-
-                if response.upper() == "Y":
-                    do_uninstall = False
-                else:
-                    return
-
-            try:
-                if do_uninstall:
-                    run_shell_command(f"{sys.executable} -m pip uninstall Common-EGSE", hide=False)
-                run_shell_command(f"{sys.executable} setup.py install --force --home={plato_install_location}")
-            except GitCommandError:
-                return
-        else:
-            # git rev-list --tags --timestamp --no-walk | sort -nr | head -n1 | cut -f 2 -d ' ' | xargs git describe --contains
-            rich.print("Usage: update_cgse ops --tag=<tag name>")
-            rc = invoke.run("git describe --tags --abbrev=0", hide="stdout")
-            rich.print(f"The latest tag name is '{rc.stdout.strip()}'.")
-            return
-
-        rich.print(
-            "To complete the installation process, perform the following actions:\n\n"
-            "On the egse-client:\n"
-            "  * stop all device control servers from the PM GUI\n"
-            "On the egse-server:\n"
-            "  * run (in the root folder of plato-common-egse): invoke stop-core-egse\n"
-            "  * the core services should automatically be re-started by systemd\n"
-            "  * (if not, run (in the root folder of plato-common-egse): invoke start-core-egse)\n"
-            "  * Alternatively, you can run: systemctl restart log_cs cm_cs sm_cs pm_cs syn_cs\n"
-            "    (it will be no guaranteed that the processes are started in the correct order, though)"
-        )
-
-
-@cli.command()
-def develop():
-    """
-    Update the Common-EGSE on a develop machine.
-
-    The following commands will be executed in the background:
-
-      * git fetch updates
-
-      * git rebase updates/develop
-
-      * python3 -m pip install -e .
-
-    """
-
-    with chdir(ROOT_PROJECT_FOLDER):
-        rich.print("Updating plato-common-egse development environment.")
-
-        try:
-            check_and_report_dirty_repo()
-        except DirtyRepoError:
-            return
-
-        try:
-            run_shell_command("git fetch updates")
-            run_shell_command("git checkout develop")
-            run_shell_command("git rebase updates/develop")
-            run_shell_command(f"{sys.executable} setup.py develop")
-            run_shell_command(f"{sys.executable} setup.py egg_info")
-            response = run_shell_command(f"{sys.executable} -m egse.version")
-        except GitCommandError:
-            return
-
-        release = response.tail("stdout").split("\n")[-1]
-
-        try:
-            response = run_shell_command("git describe --tags --long")
-            tag = response.stdout.strip().split("-")
-
-            # The tag format is:
-            #   * the annotated tag
-            #   * the number of commits since the tag
-            #   * abbreviated commit name (starts with the letter 'g')
-
-            number_of_commits = tag[-2]
-            bare_tag = "-".join(tag[:-2])
-
-        except GitCommandError:
-            return
-
-        rich.print(f"{release.strip()}")
-        if number_of_commits != 0:
-            rich.print(f"Number of commits since {bare_tag}: {number_of_commits}")
-
-
-if __name__ == "__main__":
-    cli()