builder2ibek 2.1.0__tar.gz → 2.2.0__tar.gz

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/.devcontainer/devcontainer.json

@@ -45,13 +45,12 @@
             ]
         }
     },
-    // Create the config folder for the bash-config feature and uv cache
-    "initializeCommand": "mkdir -p ${localEnv:HOME}/.config/terminal-config",
     "runArgs": [
         // Allow the container to access the host X11 display and EPICS CA
         "--net=host",
         // Make sure SELinux does not disable with access to host filesystems like tmp
-        "--security-opt=label=disable"
+        "--security-opt=label=disable",
+        "--device=/dev/net/tun"
     ],
     "mounts": [
         // Mount in the user terminal config folder so it can be edited
@@ -66,24 +65,6 @@
             "target": "/cache",
             "type": "volume"
         },
-        // Persist gh auth across container rebuilds with per-repo scoped PAT
-        {
-            "source": "gh-auth-${localWorkspaceFolderBasename}",
-            "target": "/root/.config/gh",
-            "type": "volume"
-        },
-        // Persist glab auth across container rebuilds (GitLab CLI, for ibek-support-dls)
-        {
-            "source": "glab-auth-${localWorkspaceFolderBasename}",
-            "target": "/root/.config/glab-cli",
-            "type": "volume"
-        },
-        // Mount Claude config from host (settings, memory, skills)
-        {
-            "source": "${localEnv:HOME}/.claude",
-            "target": "/root/.claude",
-            "type": "bind"
-        },
         // Mount /dls_sw readonly; slave propagation ensures autofs submounts on the host
         // are visible inside the container without needing to trigger them from within it
         "type=bind,source=/dls_sw,target=/dls_sw,readonly,bind-propagation=slave"

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/.devcontainer/postCreate.sh

@@ -1,9 +1,6 @@
 #!/bin/bash
 set -euo pipefail
 
-# Install Claude Code CLI
-curl -fsSL https://claude.ai/install.sh | bash
-
 # Install Python dependencies and pre-commit hooks
 uv venv --clear
 uv sync
@@ -11,6 +8,3 @@ pre-commit install --install-hooks
 
 # Initialise git submodules if any are declared
 [ -f .gitmodules ] && git submodule update --init || true
-
-# claude-sandbox: bring up the sandbox (added by just promote).
-bash .devcontainer/claude-sandbox/install.sh

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/Dockerfile

@@ -4,6 +4,6 @@ ARG PYTHON_VERSION=3.13
 FROM ghcr.io/diamondlightsource/ubuntu-devcontainer:noble AS developer
 
 # Add any system dependencies for the developer/build environment here
-RUN apt-get update -y && apt-get install -y --no-install-recommends \
-    graphviz \
-    && apt-get dist-clean
+# RUN apt-get update -y && apt-get install -y --no-install-recommends \
+#     graphviz \
+#     && apt-get dist-clean

{builder2ibek-2.1.0/src/builder2ibek.egg-info → builder2ibek-2.2.0}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: builder2ibek
-Version: 2.1.0
+Version: 2.2.0
 Summary: Conversion tool for DLS XML builder IOC instances to ibek ioc.yaml
 Author-email: Giles Knap <giles.knap@diamond.ac.uk>
 License:                                  Apache License
@@ -233,14 +233,9 @@ PyPI            | `pip install builder2ibek`
 Documentation   | <https://epics-containers.github.io/builder2ibek>
 Releases        | <https://github.com/epics-containers/builder2ibek/releases>
 
-Note: the devcontainer includes Claude Code vscode plugin and skills for doing
-IOC conversions from XmlBuilder to ibek.
+# Claude
 
-For a fully up to date claude client you can install the latest CLI as follows:
-
-```bash
-curl -fsSL https://claude.ai/install.sh | bash
-```
+For Claude agentic conversions, use the [claude-sandbox guest project](https://github.com/gilesknap/claude-sandbox) as a peer workspace.
 
 ## Testing
 

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/README.md

@@ -15,14 +15,9 @@ PyPI            | `pip install builder2ibek`
 Documentation   | <https://epics-containers.github.io/builder2ibek>
 Releases        | <https://github.com/epics-containers/builder2ibek/releases>
 
-Note: the devcontainer includes Claude Code vscode plugin and skills for doing
-IOC conversions from XmlBuilder to ibek.
+# Claude
 
-For a fully up to date claude client you can install the latest CLI as follows:
-
-```bash
-curl -fsSL https://claude.ai/install.sh | bash
-```
+For Claude agentic conversions, use the [claude-sandbox guest project](https://github.com/gilesknap/claude-sandbox) as a peer workspace.
 
 ## Testing
 

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/src/builder2ibek/_version.py

@@ -18,7 +18,7 @@ version_tuple: tuple[int | str, ...]
 commit_id: str | None
 __commit_id__: str | None
 
-__version__ = version = '2.1.0'
-__version_tuple__ = version_tuple = (2, 1, 0)
+__version__ = version = '2.2.0'
+__version_tuple__ = version_tuple = (2, 2, 0)
 
-__commit_id__ = commit_id = 'g4a8d3b809'
+__commit_id__ = commit_id = 'g9ecee7725'

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/src/builder2ibek/convert.py

@@ -163,6 +163,20 @@ def _has_leading_zero(val: str) -> bool:
     return len(val) > 1 and val[0] == "0" and val[1] != "."
 
 
+_CROSS_REF_RE = re.compile(r"^\$\(([^)]+)\)$")
+
+
+def _jinja_type_filter(raw_value: str | None) -> str:
+    """Return the Jinja2 type filter for a raw XML attribute value."""
+    try:
+        f = float(raw_value)  # type: ignore
+        if _has_leading_zero(raw_value):  # type: ignore
+            return "string"
+        return "int" if f.is_integer() else "float"
+    except (ValueError, TypeError):
+        return "string"
+
+
 def make_entity(element: Element) -> Entity:
     """
     default Entity creation is a direct mapping
@@ -174,6 +188,15 @@ def make_entity(element: Element) -> Entity:
     entity.type = f"{element.module}.{element.name}"
 
     for attribute_name, attribute_val in element.attributes.items():
+        # detect cross-references like $(MRES) and convert to Jinja2 templates
+        m = _CROSS_REF_RE.match(attribute_val)
+        if m:
+            ref_name = m.group(1)
+            ref_val = element.attributes.get(ref_name)
+            type_filter = _jinja_type_filter(ref_val)
+            entity[attribute_name] = f"{{{{ {ref_name} | {type_filter} }}}}"
+            continue
+
         # convert to numeric type if appropriate, otherwise Serialize will
         # put quotes around numbers in the YAML
         try:

{builder2ibek-2.1.0 → builder2ibek-2.2.0/src/builder2ibek.egg-info}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: builder2ibek
-Version: 2.1.0
+Version: 2.2.0
 Summary: Conversion tool for DLS XML builder IOC instances to ibek ioc.yaml
 Author-email: Giles Knap <giles.knap@diamond.ac.uk>
 License:                                  Apache License
@@ -233,14 +233,9 @@ PyPI            | `pip install builder2ibek`
 Documentation   | <https://epics-containers.github.io/builder2ibek>
 Releases        | <https://github.com/epics-containers/builder2ibek/releases>
 
-Note: the devcontainer includes Claude Code vscode plugin and skills for doing
-IOC conversions from XmlBuilder to ibek.
+# Claude
 
-For a fully up to date claude client you can install the latest CLI as follows:
-
-```bash
-curl -fsSL https://claude.ai/install.sh | bash
-```
+For Claude agentic conversions, use the [claude-sandbox guest project](https://github.com/gilesknap/claude-sandbox) as a peer workspace.
 
 ## Testing
 

{builder2ibek-2.1.0 → builder2ibek-2.2.0}/src/builder2ibek.egg-info/SOURCES.txt

@@ -11,8 +11,6 @@ Dockerfile
 LICENSE
 README.md
 bl21i-mo-ioc-01_blacklist.txt
-justfile
-out.yaml
 pyproject.toml
 renovate.json
 update-schema
@@ -46,15 +44,10 @@ uv.lock
 .claude/skills/shared/support-yaml-rules.md
 .claude/skills/shared/vxworks-to-rtems-differences.md
 .claude/skills/skills-edit/SKILL.md
-.devcontainer/Dockerfile
-.devcontainer/claude-sandbox.conf
 .devcontainer/devcontainer.json
 .devcontainer/initializeCommand.sh
 .devcontainer/local_build.sh
 .devcontainer/postCreate.sh
-.devcontainer/claude-sandbox/claude-shadow
-.devcontainer/claude-sandbox/install.sh
-.devcontainer/claude-sandbox/promote.sh
 .github/CONTRIBUTING.md
 .github/copilot-instructions.md
 .github/ISSUE_TEMPLATE/bug_report.md
@@ -122,6 +115,8 @@ src/builder2ibek.egg-info/SOURCES.txt
 src/builder2ibek.egg-info/dependency_links.txt
 src/builder2ibek.egg-info/entry_points.txt
 src/builder2ibek.egg-info/requires.txt
+src/builder2ibek.egg-info/scm_file_list.json
+src/builder2ibek.egg-info/scm_version.json
 src/builder2ibek.egg-info/top_level.txt
 src/builder2ibek/converters/ACCELCryoIP.py
 src/builder2ibek/converters/ADAndor.py
@@ -256,6 +251,7 @@ tests/test_compare.py
 tests/test_file_conversion.py
 tests/test_migrate_autosave.py
 tests/test_reconvert_cli.py
+tests/samples/BL03I-MO-IOC-11.xml
 tests/samples/BL04I-MO-IOC-03.xml
 tests/samples/BL04I-VA-IOC-01.xml
 tests/samples/BL04I-VA-IOC-01_expanded.db
@@ -302,6 +298,10 @@ tests/samples/bl99p-ea-ioc-05.ioc.subst
 tests/samples/bl99p-ea-ioc-05.st.cmd
 tests/samples/bl99p-ea-ioc-05.yaml
 tests/samples/compare.diff
+tests/samples/cross_ref_test.ioc.subst
+tests/samples/cross_ref_test.st.cmd
+tests/samples/cross_ref_test.xml
+tests/samples/cross_ref_test.yaml
 tests/samples/make_samples.sh
 tests/samples/motor.template
 tests/samples/motorpositioner.ioc.subst

builder2ibek-2.2.0/src/builder2ibek.egg-info/scm_file_list.json

@@ -0,0 +1,309 @@
+{
+  "files": [
+    ".pre-commit-config.yaml",
+    ".gitremotes",
+    "README.md",
+    "uv.lock",
+    ".gitmodules",
+    "update-schema",
+    "Dockerfile",
+    ".python-version",
+    "LICENSE",
+    "pyproject.toml",
+    "renovate.json",
+    "bl21i-mo-ioc-01_blacklist.txt",
+    ".gitattributes",
+    "CLAUDE.md",
+    ".gitleaks.toml",
+    ".gitignore",
+    ".copier-answers.yml",
+    ".devcontainer/postCreate.sh",
+    ".devcontainer/initializeCommand.sh",
+    ".devcontainer/local_build.sh",
+    ".devcontainer/devcontainer.json",
+    ".vscode/tasks.json",
+    ".vscode/settings.json",
+    ".vscode/mcp.json",
+    ".vscode/extensions.json",
+    "docs/explanations.md",
+    "docs/how-to.md",
+    "docs/tutorials.md",
+    "docs/_api.rst",
+    "docs/genindex.md",
+    "docs/conftest.py",
+    "docs/conf.py",
+    "docs/reference.md",
+    "docs/index.md",
+    "docs/images/dls-logo.svg",
+    "docs/_templates/custom-module-template.rst",
+    "docs/how-to/verify-with-devcontainer.md",
+    "docs/how-to/after-beamline-convert.md",
+    "docs/how-to/contribute.md",
+    "docs/how-to/create-generic-ioc-repo.md",
+    "docs/how-to/create-converter.md",
+    "docs/how-to/convert-ioc-instance.md",
+    "docs/how-to/runtime-support.md",
+    "docs/how-to/migrate-autosave.md",
+    "docs/how-to/autosave.md",
+    "docs/explanations/decisions.md",
+    "docs/explanations/decisions/COPYME",
+    "docs/explanations/decisions/0002-switched-to-python-copier-template.md",
+    "docs/explanations/decisions/0003-remove-mcp-server-for-copilot.md",
+    "docs/explanations/decisions/0001-record-architecture-decisions.md",
+    "docs/reference/dlsplc-migration.md",
+    "docs/tutorials/installation.md",
+    "docs/tutorials/create-support-yaml-advanced.md",
+    "docs/tutorials/convert-ioc-xml.md",
+    "docs/tutorials/create-support-yaml.md",
+    "src/builder2ibek/__init__.py",
+    "src/builder2ibek/reconvert.py",
+    "src/builder2ibek/utils.py",
+    "src/builder2ibek/db2autosave.py",
+    "src/builder2ibek/builder.py",
+    "src/builder2ibek/migrate_autosave.py",
+    "src/builder2ibek/moduleinfos.py",
+    "src/builder2ibek/dbcompare.py",
+    "src/builder2ibek/convert.py",
+    "src/builder2ibek/support_defaults.py",
+    "src/builder2ibek/__main__.py",
+    "src/builder2ibek/types.py",
+    "src/builder2ibek/converters/lakeshore340.py",
+    "src/builder2ibek/converters/water.py",
+    "src/builder2ibek/converters/quadEM.py",
+    "src/builder2ibek/converters/temperature.py",
+    "src/builder2ibek/converters/agilent33220A.py",
+    "src/builder2ibek/converters/deltaTauPLCStat.py",
+    "src/builder2ibek/converters/cognexDataMan100.py",
+    "src/builder2ibek/converters/OXCS700.py",
+    "src/builder2ibek/converters/asyn.py",
+    "src/builder2ibek/converters/FastVacuum.py",
+    "src/builder2ibek/converters/mrfTiming.py",
+    "src/builder2ibek/converters/ADCore.py",
+    "src/builder2ibek/converters/README.md",
+    "src/builder2ibek/converters/uniblitz.py",
+    "src/builder2ibek/converters/__init__.py",
+    "src/builder2ibek/converters/motorSmarAct.py",
+    "src/builder2ibek/converters/DLS8515.py",
+    "src/builder2ibek/converters/ADAravis.py",
+    "src/builder2ibek/converters/Xspress3.py",
+    "src/builder2ibek/converters/BL15I-BUILDER.py",
+    "src/builder2ibek/converters/IOCInfo.py",
+    "src/builder2ibek/converters/BL46P-BUILDER.py",
+    "src/builder2ibek/converters/procServControl.py",
+    "src/builder2ibek/converters/ADAndor.py",
+    "src/builder2ibek/converters/lakeshore336.py",
+    "src/builder2ibek/converters/smaractEcm.py",
+    "src/builder2ibek/converters/strainGauge.py",
+    "src/builder2ibek/converters/leybold.py",
+    "src/builder2ibek/converters/OXCryo.py",
+    "src/builder2ibek/converters/SycosH-Hot.py",
+    "src/builder2ibek/converters/femto.py",
+    "src/builder2ibek/converters/ethercat.py",
+    "src/builder2ibek/converters/mks937a.py",
+    "src/builder2ibek/converters/fogaleHLS.py",
+    "src/builder2ibek/converters/alicatGasFlow.py",
+    "src/builder2ibek/converters/Hy8414.py",
+    "src/builder2ibek/converters/transfocator.py",
+    "src/builder2ibek/converters/positioner.py",
+    "src/builder2ibek/converters/pvlogging.py",
+    "src/builder2ibek/converters/mxEH.py",
+    "src/builder2ibek/converters/smargon.py",
+    "src/builder2ibek/converters/filters.py",
+    "src/builder2ibek/converters/vacuumValve.py",
+    "src/builder2ibek/converters/directoryMonitor.py",
+    "src/builder2ibek/converters/utility.py",
+    "src/builder2ibek/converters/ADZMQ.py",
+    "src/builder2ibek/converters/insertionDevice.py",
+    "src/builder2ibek/converters/mks937b.py",
+    "src/builder2ibek/converters/ADOdinTristan.py",
+    "src/builder2ibek/converters/digitelMpc.py",
+    "src/builder2ibek/converters/ether_ip.py",
+    "src/builder2ibek/converters/gdaPlugins.yaml",
+    "src/builder2ibek/converters/bronkhorstFlowBus.py",
+    "src/builder2ibek/converters/keithley6514.py",
+    "src/builder2ibek/converters/enzLoCuM4.py",
+    "src/builder2ibek/converters/slsDetector.py",
+    "src/builder2ibek/converters/ADPilatus.py",
+    "src/builder2ibek/converters/currAmp.py",
+    "src/builder2ibek/converters/ACCELCryoIP.py",
+    "src/builder2ibek/converters/BLfeedback.py",
+    "src/builder2ibek/converters/motomanNX100.py",
+    "src/builder2ibek/converters/pgmVls.py",
+    "src/builder2ibek/converters/BLGui.py",
+    "src/builder2ibek/converters/cmsIon.py",
+    "src/builder2ibek/converters/adUtil.py",
+    "src/builder2ibek/converters/mirror.py",
+    "src/builder2ibek/converters/Hy8401ip-asyn.py",
+    "src/builder2ibek/converters/agilent53220.py",
+    "src/builder2ibek/converters/harvardSyringe.py",
+    "src/builder2ibek/converters/fw102.py",
+    "src/builder2ibek/converters/pmacCoord.py",
+    "src/builder2ibek/converters/pmacUtil.py",
+    "src/builder2ibek/converters/FINS.py",
+    "src/builder2ibek/converters/globalHandler.py",
+    "src/builder2ibek/converters/digitelSpc.py",
+    "src/builder2ibek/converters/hidenRGA.py",
+    "src/builder2ibek/converters/OXCS700asyn.py",
+    "src/builder2ibek/converters/gasInjectionRig.py",
+    "src/builder2ibek/converters/TimingTemplates.py",
+    "src/builder2ibek/converters/Hy8401ipTemplates.py",
+    "src/builder2ibek/converters/AMI186.py",
+    "src/builder2ibek/converters/scpi.py",
+    "src/builder2ibek/converters/eurothermModbus.py",
+    "src/builder2ibek/converters/vacuumSpace.py",
+    "src/builder2ibek/converters/ADOdin.py",
+    "src/builder2ibek/converters/rga.py",
+    "src/builder2ibek/converters/pmac.py",
+    "src/builder2ibek/converters/Hy8402ip.py",
+    "src/builder2ibek/converters/SR-VA.py",
+    "src/builder2ibek/converters/deviocstats.py",
+    "src/builder2ibek/converters/BL21I.py",
+    "src/builder2ibek/converters/epics_base.py",
+    "src/builder2ibek/converters/SchottLLS.py",
+    "src/builder2ibek/converters/ETLdetector.py",
+    "src/builder2ibek/converters/gdaPlugins.py",
+    "src/builder2ibek/converters/interlock.py",
+    "src/builder2ibek/converters/ADIvium.py",
+    "src/builder2ibek/converters/eurotherm2k.py",
+    "src/builder2ibek/converters/CryoCoolerXV.py",
+    "src/builder2ibek/converters/records.py",
+    "src/builder2ibek/converters/ipac.py",
+    "src/builder2ibek/converters/QPC.py",
+    "src/builder2ibek/converters/mitsubishiRobot.py",
+    "src/builder2ibek/converters/motor.py",
+    "src/builder2ibek/converters/autosave.py",
+    "src/builder2ibek/converters/BL20J.py",
+    "src/builder2ibek/converters/mca.py",
+    "src/builder2ibek/converters/mks9xx.py",
+    "src/builder2ibek/converters/BL11I.py",
+    "src/builder2ibek/converters/tpmac.py",
+    "src/builder2ibek/converters/DruckDPI515.py",
+    "src/builder2ibek/converters/laudaRE2xx.py",
+    "src/builder2ibek/converters/rackFan.py",
+    "src/builder2ibek/converters/zebra.py",
+    "src/builder2ibek/converters/Hy8401ip.py",
+    "src/builder2ibek/converters/picotechPT104.py",
+    "src/builder2ibek/converters/mrfioc2.py",
+    "src/builder2ibek/converters/dlsPLC.py",
+    "src/builder2ibek/converters/fzoom.py",
+    "src/builder2ibek/converters/terminalserver.py",
+    "src/builder2ibek/converters/ffmpegServer.py",
+    "src/builder2ibek/converters/userIO.py",
+    "src/builder2ibek/converters/CrateMonitor.py",
+    "src/builder2ibek/converters/BL19I.py",
+    "src/builder2ibek/converters/rgamv2.py",
+    ".claude/statusline-command.sh",
+    ".claude/settings.json",
+    ".claude/commands/support-create.md",
+    ".claude/commands/beamline-convert.md",
+    ".claude/commands/ioc-check.md",
+    ".claude/commands/support-fix.md",
+    ".claude/commands/ioc-inspect.md",
+    ".claude/commands/beamline-reconvert.md",
+    ".claude/commands/ioc-convert.md",
+    ".claude/commands/memo.md",
+    ".claude/commands/ioc-convert-raw.md",
+    ".claude/commands/beamline-check.md",
+    ".claude/commands/support-inspect.md",
+    ".claude/skills/shared/services-repo-resolution.md",
+    ".claude/skills/shared/find-module-path.md",
+    ".claude/skills/shared/module-special-cases.md",
+    ".claude/skills/shared/module-rename-map.md",
+    ".claude/skills/shared/find-ioc-xmls.md",
+    ".claude/skills/shared/builder-py-analysis.md",
+    ".claude/skills/shared/error-categorization.md",
+    ".claude/skills/shared/find-boot-script.md",
+    ".claude/skills/shared/vxworks-to-rtems-differences.md",
+    ".claude/skills/shared/autosave-conversion.md",
+    ".claude/skills/shared/support-yaml-rules.md",
+    ".claude/skills/ibek-support-ansible/SKILL.md",
+    ".claude/skills/skills-edit/SKILL.md",
+    ".claude/skills/ibek-concepts/SKILL.md",
+    ".claude/skills/beamline-gui/SKILL.md",
+    ".claude/hooks/sandbox-check.sh",
+    "tests/__init__.py",
+    "tests/test_compare.py",
+    "tests/test_autosave.py",
+    "tests/test_file_conversion.py",
+    "tests/test_migrate_autosave.py",
+    "tests/test_reconvert_cli.py",
+    "tests/conftest.py",
+    "tests/test_cli.py",
+    "tests/samples/bl16i-va-ioc-01.st.cmd",
+    "tests/samples/bl21i-mo-ioc-01.yaml",
+    "tests/samples/bl11i-cs-ioc-09.st.cmd",
+    "tests/samples/bl21i-mo-ioc-01.st.cmd",
+    "tests/samples/sr03c-va-ioc-01.yaml",
+    "tests/samples/bl11i-va-ioc-01.st.cmd",
+    "tests/samples/BL15I-VA-IOC-01.xml",
+    "tests/samples/BL99P-EA-IOC-05.xml",
+    "tests/samples/bl04i-va-ioc-01.st.cmd",
+    "tests/samples/motorpositioner.xml",
+    "tests/samples/bl45p-mo-ioc-01.yaml",
+    "tests/samples/bl19i-va-ioc-01.ioc.subst",
+    "tests/samples/bl11i-cs-ioc-09.yaml",
+    "tests/samples/sr03c-va-ioc-01.ioc.subst",
+    "tests/samples/bl11i-va-ioc-01.yaml",
+    "tests/samples/BL03I-MO-IOC-11.xml",
+    "tests/samples/bl11i-cs-ioc-09.ioc.subst",
+    "tests/samples/bl99p-ea-ioc-05.st.cmd",
+    "tests/samples/bl04i-mo-ioc-03.ioc.subst",
+    "tests/samples/bl16i-va-ioc-01.ioc.subst",
+    "tests/samples/bl45p-mo-ioc-01.st.cmd",
+    "tests/samples/SR03C-VA-IOC-01.xml",
+    "tests/samples/bl99p-ea-ioc-05.ioc.subst",
+    "tests/samples/sr03c-va-ioc-01.st.cmd",
+    "tests/samples/bl04i-mo-ioc-03.st.cmd",
+    "tests/samples/cross_ref_test.xml",
+    "tests/samples/BL16I-VA-IOC-01.xml",
+    "tests/samples/BL45P-MO-IOC-01.xml",
+    "tests/samples/cross_ref_test.yaml",
+    "tests/samples/make_samples.sh",
+    "tests/samples/motor.template",
+    "tests/samples/SR03C-VA-IOC-01_expanded.db",
+    "tests/samples/bl21i-mo-ioc-01_blacklist.txt",
+    "tests/samples/BL99P-EA-IOC-05.yaml",
+    "tests/samples/bl16i-va-ioc-01.yaml",
+    "tests/samples/BL04I-VA-IOC-01.xml",
+    "tests/samples/bl19i-va-ioc-01.st.cmd",
+    "tests/samples/BL19I-VA-IOC-01.xml",
+    "tests/samples/bl04i-va-ioc-01.yaml",
+    "tests/samples/motorpositioner.st.cmd",
+    "tests/samples/bl45p-mo-ioc-01.ioc.subst",
+    "tests/samples/bl21i-mo-ioc-01.ioc.subst",
+    "tests/samples/bl15i-va-ioc-01.yaml",
+    "tests/samples/bl11i-va-ioc-01.ioc.subst",
+    "tests/samples/bl04i-va-ioc-01.ioc.subst",
+    "tests/samples/BL04I-VA-IOC-01_expanded.db",
+    "tests/samples/sr03c-va-ioc-01.db",
+    "tests/samples/bl15i-va-ioc-01.st.cmd",
+    "tests/samples/motorpositioner.ioc.subst",
+    "tests/samples/bl15i-va-ioc-01.ioc.subst",
+    "tests/samples/BL04I-MO-IOC-03.xml",
+    "tests/samples/BL11I-VA-IOC-01.xml",
+    "tests/samples/cross_ref_test.st.cmd",
+    "tests/samples/cross_ref_test.ioc.subst",
+    "tests/samples/bl99p-ea-ioc-05.yaml",
+    "tests/samples/BL21I-MO-IOC-01.xml",
+    "tests/samples/bl04i-mo-ioc-03.yaml",
+    "tests/samples/bl19i-va-ioc-01.yaml",
+    "tests/samples/motorpositioner.yaml",
+    "tests/samples/BL11I-CS-IOC-09.xml",
+    "tests/samples/compare.diff",
+    ".github/copilot-instructions.md",
+    ".github/CONTRIBUTING.md",
+    ".github/PULL_REQUEST_TEMPLATE/pull_request_template.md",
+    ".github/pages/index.html",
+    ".github/pages/make_switcher.py",
+    ".github/ISSUE_TEMPLATE/bug_report.md",
+    ".github/ISSUE_TEMPLATE/issue.md",
+    ".github/workflows/_pypi.yml",
+    ".github/workflows/periodic.yml",
+    ".github/workflows/_release.yml",
+    ".github/workflows/_docs.yml",
+    ".github/workflows/_test.yml",
+    ".github/workflows/ci.yml",
+    ".github/workflows/_tox.yml",
+    ".github/workflows/_dist.yml"
+  ]
+}

builder2ibek-2.2.0/src/builder2ibek.egg-info/scm_version.json

@@ -0,0 +1,8 @@
+{
+  "tag": "2.2.0",
+  "distance": 0,
+  "node": "g9ecee7725232c7f4642f2b2ad402ee65e133119b",
+  "dirty": false,
+  "branch": "HEAD",
+  "node_date": "2026-07-03"
+}

builder2ibek-2.2.0/tests/samples/BL03I-MO-IOC-11.xml

@@ -0,0 +1,27 @@
+<?xml version="1.0" ?>
+<components arch="linux-x86_64">
+	<EPICS_BASE.EpicsEnvSet key="IOCSH_PS1" name="prompt" value="BL03I-MO-IOC-11 -&gt;"/>
+	<EPICS_BASE.EpicsEnvSet key="EPICS_CA_MAX_ARRAY_BYTES" name="maxArrayBytes" value="6000000"/>
+	<devIocStats.devIocStatsHelper guiTags="True" ioc="BL03I-MO-IOC-11" name="MO11" scanMonitor="True" screen="ioc_stats_softdls.edl"/>
+	<autosave.Autosave bl="False" debug="0" iocName="BL03I-MO-IOC-11" ip="None" path="/dls_sw/i03/epics/autosave" server="None" skip_1="False" vx_gid="500" vx_uid="37134"/>
+	<pmac.pmacAsynSSHPort IP="10.0.0.0" PASSWORD="pytest" name="PPMAC01_PORT"/>
+	<pmac.PowerPMAC P="BL03I-MO-PPMAC-01" Port="PPMAC01_PORT" name="PPMAC01"/>
+	<pmac.dls_pmac_asyn_motor ACCL="0.1" ADDR="5" BACC="0.5" BVEL="0.2" DESC="QBPM1 Y Translation" DHLM="1.1" DLLM="-41" EGU="mm" ERES="$(MRES)" HOME="BL03I-DI-QBPM-01" HOMEVIS="" JAR="1" M=":Y" MRES="0.0001" OFF="0" P="BL03I-DI-QBPM-01" PORT="PPMAC01" PREC="4" SPORT="PPMAC01_PORT" SREV="200" TWV="1" VELO="2.5" VMAX="3" gda_desc="Pre-HFM QBPM Y" gda_name="QBPM1.Y" name="QBPM1.Y"/>
+	<!--<pmac.dls_pmac_asyn_motor ACCL="0.1" ADDR="1" BACC="0.5" BVEL="0.1" DESC="S1 X Inboard Blade" DHLM="9" DLLM="-27" EGU="mm" ERES="$(MRES)" HOME="BL03I-AL-SLITS-01" HOMEVIS="" JAR="1" M=":X:MINUS" MRES="0.001" P="BL03I-AL-SLITS-01" PORT="PPMAC01" PREC="4" SPORT="PPMAC01_PORT" SREV="200" TWV="1" VELO="2" gda_desc="White Beam Slits XM" gda_name="S1.XM" name="S1.XMINUS"/>-->
+	<!--<pmac.dls_pmac_asyn_motor ACCL="0.1" ADDR="2" BACC="0.5" BVEL="0.1" DESC="S1 X Outboard Blade" DHLM="27" DLLM="-9" EGU="mm" ERES="$(MRES)" HOME="BL03I-AL-SLITS-01" HOMEVIS="" JAR="1" M=":X:PLUS" MRES="0.001" P="BL03I-AL-SLITS-01" PORT="PPMAC01" PREC="4" SPORT="PPMAC01_PORT" SREV="200" TWV="1" VELO="2" gda_desc="White Beam Slits XP" gda_name="S1.XP" name="S1.XPLUS"/>-->
+	<!--<pmac.dls_pmac_asyn_motor ACCL="0.1" ADDR="3" BACC="0.5" BVEL="0.1" DESC="S1 Y Top Blade" DHLM="27" DLLM="-9" EGU="mm" ERES="$(MRES)" HOME="BL03I-AL-SLITS-01" HOMEVIS="" JAR="1" M=":Y:PLUS" MRES="0.001" P="BL03I-AL-SLITS-01" PORT="PPMAC01" PREC="4" SPORT="PPMAC01_PORT" SREV="200" TWV="1" VELO="2" gda_desc="White Beam Slits YP" gda_name="S1.YP" name="S1.YPLUS"/>-->
+	<!--<pmac.dls_pmac_asyn_motor ACCL="0.1" ADDR="4" BACC="0.5" BVEL="0.1" DESC="S1 Y Bottom Blade" DHLM="9" DLLM="-27" EGU="mm" ERES="$(MRES)" HOME="BL03I-AL-SLITS-01" HOMEVIS="" JAR="1" M=":Y:MINUS" MRES="0.001" P="BL03I-AL-SLITS-01" PORT="PPMAC01" PREC="4" SPORT="PPMAC01_PORT" SREV="200" TWV="1" VELO="2" gda_desc="White Beam Slits YM" gda_name="S1.YM" name="S1.YMINUS"/>-->
+	<pmac.autohome GRP1="" GRP2="QBPM1" P="BL03I-DI-QBPM-01" PLC="12" PORT="PPMAC01" name="QBPM1"/>
+	<!--<pmac.autohome GRP2="X Translations" GRP3="Y Translations" P="BL03I-AL-SLITS-01" PLC="11" PORT="PPMAC01" name="S1"/>-->
+	<positioner.multipositioner DESC="Pre-HFM QBPM" MP=":Y:MP" P="BL03I-DI-QBPM-01" STRA="Interlock" STRB="Out of the Beam" STRC="Lower Foil" STRD="Upper Foil" gda_desc="QBPM1 Pre-HFM QBPM" gda_name="QBPM1.APOSN" name="QBPM1.MP"/>
+	<positioner.motorpositioner DESC="Pre-HFM QBPM" MP="QBPM1.MP" PREC="5" Q=":Y:P" VALA="1.1" VALB="-0.0025" VALC="-18.752" VALD="-37.855" motor="QBPM1.Y" name="QBPM1.MP.M1"/>
+	<!--<pmac.CS CS="2" Controller="PPMAC01" PLCNum="10" name="PPMAC01_CS2"/>-->
+	<!--<pmac.CS CS="3" Controller="PPMAC01" PLCNum="10" name="PPMAC01_CS3"/>-->
+	<!--<pmac.dls_pmac_cs_asyn_motor ADDR="7" DESC="X Centre" DHLM="12.25" DLLM="-12.25" EGU="mm" ERES="$(MRES)" HOMEVIS="0" HOMEVISSTR="" JAR="1" M=":X:CENTRE" MRES="0.0001" P="BL03I-AL-SLITS-01" PORT="PPMAC01_CS2" PREC="5" RDBD="0.0001" TWV="1" VELO="2" gda_desc="S1 X Centre" gda_name="S1.XCENTRE" name="S1.XCENTRE"/>-->
+	<!--<pmac.dls_pmac_cs_asyn_motor ADDR="8" DESC="X Size" DHLM="49.937" DLLM="-14.935" EGU="mm" ERES="$(MRES)" HOMEVIS="0" HOMEVISSTR="" JAR="1" M=":X:SIZE" MRES="0.0001" OFF="0.499" P="BL03I-AL-SLITS-01" PORT="PPMAC01_CS2" PREC="5" RDBD="0.0001" TWV="1" VELO="2" gda_desc="S1 X Size" gda_name="S1.XSIZE" name="S1.XSIZE"/>-->
+	<!--<pmac.dls_pmac_cs_asyn_motor/>-->
+	<!--<pmac.dls_pmac_cs_asyn_motor ADDR="7" DESC="Y Centre" DHLM="10.8755" DLLM="-10.8755" EGU="mm" ERES="$(MRES)" HOMEVIS="0" HOMEVISSTR="" JAR="1" M=":Y:CENTRE" MRES="0.0001" P="BL03I-AL-SLITS-01" PORT="PPMAC01_CS3" PREC="5" RDBD="0.0001" TWV="1" VELO="2" gda_desc="S1 Y Centre" gda_name="S1.YCENTRE" name="S1.YCENTRE"/>-->
+	<!--<pmac.dls_pmac_cs_asyn_motor ADDR="8" DESC="Y Size" DHLM="50.521" DLLM="-17.021" EGU="mm" ERES="$(MRES)" HOMEVIS="0" HOMEVISSTR="" JAR="1" M=":Y:SIZE" MRES="0.0001" OFF="1.25" P="BL03I-AL-SLITS-01" PORT="PPMAC01_CS3" PREC="5" RDBD="0.0001" TWV="1" VELO="2" gda_desc="S1 Y Size" gda_name="S1.YSIZE" name="S1.YSIZE"/>-->
+	<!--<BL03I.auto_asynMotorAlias P="BL03I-AL-SLITS-01:X:CENTRE" alias="BL03I-AL-SLITS-01:X:CENTER"/>-->
+	<!--<BL03I.auto_asynMotorAlias P="BL03I-AL-SLITS-01:Y:CENTRE" alias="BL03I-AL-SLITS-01:Y:CENTER"/>-->
+</components>

builder2ibek-2.2.0/tests/samples/cross_ref_test.ioc.subst

@@ -0,0 +1,46 @@
+#############################################################################
+# DB substitution file generated by http://github.com/epics-containers/ibek #
+#############################################################################
+
+file "$(IOCSTATS)/db/iocAdminSoft.db" {
+pattern 
+	{ "IOC" }
+	{ ""    }
+}
+
+file "$(IOCSTATS)/db/iocAdminScanMon.db" {
+pattern 
+	{ "IOC" }
+	{ ""    }
+}
+
+file "powerPmacStatus.template" {
+pattern 
+	{ "P",                 "PORT"    }
+	{ "BL999-MO-PPMAC-01", "PPMAC01" }
+}
+
+file "pmacController.template" {
+pattern 
+	{ "FEEDRATE", "CSG7", "CSG6", "CSG5", "CSG4", "CSG3", "CSG2", "CSG1", "CSG0", "P",                 "TIMEOUT", "NAXES", "PORT"    }
+	{ "100",      "",     "",     "",     "",     "",     "",     "",     "",     "BL999-MO-PPMAC-01", "4",       "8",     "PPMAC01" }
+}
+
+file "pmacStatusAxis.template" {
+pattern 
+	{ "type",             "entity_enabled", "PMAC",              "PORT",    "AXIS" }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "1"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "2"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "3"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "4"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "5"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "6"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "7"    }
+	{ "pmac._axisStatus", "True",           "BL999-MO-PPMAC-01", "PPMAC01", "8"    }
+}
+
+file "dls_pmac_asyn_motor.template" {
+pattern 
+	{ "P",      "M",  "PORT",    "SPORT",        "CS", "PMAC",              "VELO", "ACCL", "SCALE", "BACC", "alh",  "DHLM", "HOMEVIS", "EGU", "FEHSV",    "VBAS", "VMAX", "HOME",   "BDST", "DIR", "DTYP",      "FEHIGH", "DLLM",  "INIT", "ALLOW_HOMED_SET", "RDBL", "SREV", "LLM", "ADEL", "RDBD", "URIP", "ADDR", "RTRY", "OFF", "ERES",   "FEHIHI", "FEHHSV",   "JAR", "DESC", "BVEL", "MRES",   "DLY", "HLSV",  "UEIP", "RRES", "PREC", "RLNK", "FOFF", "HLM", "NTM", "TWV", "HOMEVISSTR"               }
+	{ "012345", ":Y", "PPMAC01", "PPMAC01_PORT", "0",  "BL999-MO-PPMAC-01", "2.5",  "0.1",  "1",     "0.5",  "None", "1.1",  "1",       "mm",  "NO_ALARM", "0.0",  "2.5",  "012345", "0.0",  "0",   "asynMotor", "0.0",    "-41.0", "",     "#",               "",     "200",  "0.0", "0.0",  "0.0",  "0",    "1",    "0",    "0.0", "0.0001", "0.0",    "NO_ALARM", "1.0", ":Y",   "0.2",  "0.0001", "0",   "MAJOR", "0",    "0.0",  "4",    "",     "0",    "0.0", "1",   "1.0", "Use motor summary screen" }
+}